summaryrefslogtreecommitdiff
path: root/quantum
diff options
context:
space:
mode:
Diffstat (limited to 'quantum')
-rw-r--r--quantum/quantum.c239
1 files changed, 141 insertions, 98 deletions
diff --git a/quantum/quantum.c b/quantum/quantum.c
index d98c601d99..77cbbb2e77 100644
--- a/quantum/quantum.c
+++ b/quantum/quantum.c
@@ -1034,104 +1034,147 @@ void matrix_scan_quantum() {
}
#if defined(BACKLIGHT_ENABLE) && (defined(BACKLIGHT_PIN) || defined(BACKLIGHT_PINS))
-// The logic is a bit complex, we support 3 setups:
-// 1. hardware PWM when backlight is wired to a PWM pin
-// depending on this pin, we use a different output compare unit
-// 2. software PWM with hardware timers, but the used timer depends
-// on the audio setup (audio wins other backlight)
-// 3. full software PWM
-
-#if BACKLIGHT_PIN == B7
-# define HARDWARE_PWM
-# define TCCRxA TCCR1A
-# define TCCRxB TCCR1B
-# define COMxx1 COM1C1
-# define OCRxx OCR1C
-# define TIMERx_OVF_vect TIMER1_OVF_vect
-# define TOIEx TOIE1
-# define ICRx ICR1
-# define TIMSKx TIMSK1
-#elif BACKLIGHT_PIN == B6
-# define HARDWARE_PWM
-# define TCCRxA TCCR1A
-# define TCCRxB TCCR1B
-# define COMxx1 COM1B1
-# define OCRxx OCR1B
-# define TIMERx_OVF_vect TIMER1_OVF_vect
-# define TOIEx TOIE1
-# define ICRx ICR1
-# define TIMSKx TIMSK1
-#elif BACKLIGHT_PIN == B5
-# define HARDWARE_PWM
-# define TCCRxA TCCR1A
-# define TCCRxB TCCR1B
-# define COMxx1 COM1A1
-# define OCRxx OCR1A
-# define TIMERx_OVF_vect TIMER1_OVF_vect
-# define TOIEx TOIE1
-# define ICRx ICR1
-# define TIMSKx TIMSK1
-#elif BACKLIGHT_PIN == C6
-# define HARDWARE_PWM
-# define TCCRxA TCCR3A
-# define TCCRxB TCCR3B
-# define COMxx1 COM3A1
-# define OCRxx OCR3A
-# define TIMERx_OVF_vect TIMER3_OVF_vect
-# define TOIEx TOIE3
-# define ICRx ICR3
-# define TIMSKx TIMSK3
-#elif defined(__AVR_ATmega32A__) && BACKLIGHT_PIN == D4
-# define TCCRxA TCCR1A
-# define TCCRxB TCCR1B
-# define COMxx1 COM1B1
-# define OCRxx OCR1B
-# define TIMERx_OVF_vect TIMER1_OVF_vect
-# define TOIEx TOIE1
-# define ICRx ICR1
-# define TIMSKx TIMSK1
+// This logic is a bit complex, we support 3 setups:
+//
+// 1. Hardware PWM when backlight is wired to a PWM pin.
+// Depending on this pin, we use a different output compare unit.
+// 2. Software PWM with hardware timers, but the used timer
+// depends on the Audio setup (Audio wins over Backlight).
+// 3. Full software PWM, driven by the matrix scan, if both timers are used by Audio.
+
+#if (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) \
+ || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) \
+ || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) \
+ && (BACKLIGHT_PIN == B5 || BACKLIGHT_PIN == B6 || BACKLIGHT_PIN == B7)
+ #define HARDWARE_PWM
+ #define ICRx ICR1
+ #define TCCRxA TCCR1A
+ #define TCCRxB TCCR1B
+ #define TIMERx_OVF_vect TIMER1_OVF_vect
+ #define TIMSKx TIMSK1
+ #define TOIEx TOIE1
+
+ #if BACKLIGHT_PIN == B5
+ #define COMxx1 COM1A1
+ #define OCRxx OCR1A
+ #elif BACKLIGHT_PIN == B6
+ #define COMxx1 COM1B1
+ #define OCRxx OCR1B
+ #elif BACKLIGHT_PIN == B7
+ #define COMxx1 COM1C1
+ #define OCRxx OCR1C
+ #endif
+#elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) \
+ || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) \
+ || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) \
+ && (BACKLIGHT_PIN == C4 || BACKLIGHT_PIN == C5 || BACKLIGHT_PIN == C6)
+ #define HARDWARE_PWM
+ #define ICRx ICR3
+ #define TCCRxA TCCR3A
+ #define TCCRxB TCCR3B
+ #define TIMERx_OVF_vect TIMER3_OVF_vect
+ #define TIMSKx TIMSK3
+ #define TOIEx TOIE3
+
+ #if BACKLIGHT_PIN == C4
+ #if (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
+ #error This MCU has no C4 pin!
+ #else
+ #define COMxx1 COM3C1
+ #define OCRxx OCR3C
+ #endif
+ #elif BACKLIGHT_PIN == C5
+ #if (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
+ #error This MCU has no C5 pin!
+ #else
+ #define COMxx1 COM3B1
+ #define OCRxx OCR3B
+ #endif
+ #elif BACKLIGHT_PIN == C6
+ #define COMxx1 COM3A1
+ #define OCRxx OCR3A
+ #endif
+#elif (defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__)) \
+ && (BACKLIGHT_PIN == B7 || BACKLIGHT_PIN == C5 || BACKLIGHT_PIN == C6)
+ #define HARDWARE_PWM
+ #define ICRx ICR1
+ #define TCCRxA TCCR1A
+ #define TCCRxB TCCR1B
+ #define TIMERx_OVF_vect TIMER1_OVF_vect
+ #define TIMSKx TIMSK1
+ #define TOIEx TOIE1
+
+ #if BACKLIGHT_PIN == B7
+ #define COMxx1 COM1C1
+ #define OCRxx OCR1C
+ #elif BACKLIGHT_PIN == C5
+ #define COMxx1 COM1B1
+ #define OCRxx OCR1B
+ #elif BACKLIGHT_PIN == C6
+ #define COMxx1 COM1A1
+ #define OCRxx OCR1A
+ #endif
+#elif defined(__AVR_ATmega32A__) \
+ && (BACKLIGHT_PIN == D4 || BACKLIGHT_PIN == D5)
+ #define HARDWARE_PWM
+ #define ICRx ICR1
+ #define TCCRxA TCCR1A
+ #define TCCRxB TCCR1B
+ #define TIMERx_OVF_vect TIMER1_OVF_vect
+ #define TIMSKx TIMSK
+ #define TOIEx TOIE1
+
+ #if BACKLIGHT_PIN == D4
+ #define COMxx1 COM1B1
+ #define OCRxx OCR1B
+ #elif BACKLIGHT_PIN == D5
+ #define COMxx1 COM1A1
+ #define OCRxx OCR1A
+ #endif
#else
-# if !defined(BACKLIGHT_CUSTOM_DRIVER)
-# if !defined(B5_AUDIO) && !defined(B6_AUDIO) && !defined(B7_AUDIO)
- // timer 1 is not used by audio , backlight can use it
-#pragma message "Using hardware timer 1 with software PWM"
-# define HARDWARE_PWM
-# define BACKLIGHT_PWM_TIMER
-# define TCCRxA TCCR1A
-# define TCCRxB TCCR1B
-# define OCRxx OCR1A
-# define TIMERx_COMPA_vect TIMER1_COMPA_vect
-# define TIMERx_OVF_vect TIMER1_OVF_vect
-# define OCIExA OCIE1A
-# define TOIEx TOIE1
-# define ICRx ICR1
-# if defined(__AVR_ATmega32A__) // This MCU has only one TIMSK register
-# define TIMSKx TIMSK
-# else
-# define TIMSKx TIMSK1
-# endif
-# elif !defined(C6_AUDIO) && !defined(C5_AUDIO) && !defined(C4_AUDIO)
-#pragma message "Using hardware timer 3 with software PWM"
-// timer 3 is not used by audio, backlight can use it
-# define HARDWARE_PWM
-# define BACKLIGHT_PWM_TIMER
-# define TCCRxA TCCR3A
-# define TCCRxB TCCR3B
-# define OCRxx OCR3A
-# define TIMERx_COMPA_vect TIMER3_COMPA_vect
-# define TIMERx_OVF_vect TIMER3_OVF_vect
-# define OCIExA OCIE3A
-# define TOIEx TOIE3
-# define ICRx ICR1
-# define TIMSKx TIMSK3
-# else
-#pragma message "Audio in use - using pure software PWM"
-#define NO_HARDWARE_PWM
-# endif
-# else
-#pragma message "Custom driver defined - using pure software PWM"
-#define NO_HARDWARE_PWM
-# endif
+ #if !defined(BACKLIGHT_CUSTOM_DRIVER)
+ #if !defined(B5_AUDIO) && !defined(B6_AUDIO) && !defined(B7_AUDIO)
+ // Timer 1 is not in use by Audio feature, Backlight can use it
+ #pragma message "Using hardware timer 1 with software PWM"
+ #define HARDWARE_PWM
+ #define BACKLIGHT_PWM_TIMER
+ #define ICRx ICR1
+ #define TCCRxA TCCR1A
+ #define TCCRxB TCCR1B
+ #define TIMERx_COMPA_vect TIMER1_COMPA_vect
+ #define TIMERx_OVF_vect TIMER1_OVF_vect
+ #if defined(__AVR_ATmega32A__) // This MCU has only one TIMSK register
+ #define TIMSKx TIMSK
+ #else
+ #define TIMSKx TIMSK1
+ #endif
+ #define TOIEx TOIE1
+
+ #define OCIExA OCIE1A
+ #define OCRxx OCR1A
+ #elif !defined(C6_AUDIO) && !defined(C5_AUDIO) && !defined(C4_AUDIO)
+ #pragma message "Using hardware timer 3 with software PWM"
+ // Timer 3 is not in use by Audio feature, Backlight can use it
+ #define HARDWARE_PWM
+ #define BACKLIGHT_PWM_TIMER
+ #define ICRx ICR1
+ #define TCCRxA TCCR3A
+ #define TCCRxB TCCR3B
+ #define TIMERx_COMPA_vect TIMER3_COMPA_vect
+ #define TIMERx_OVF_vect TIMER3_OVF_vect
+ #define TIMSKx TIMSK3
+ #define TOIEx TOIE3
+
+ #define OCIExA OCIE3A
+ #define OCRxx OCR3A
+ #else
+ #pragma message "Audio in use - using pure software PWM"
+ #define NO_HARDWARE_PWM
+ #endif
+ #else
+ #pragma message "Custom driver defined - using pure software PWM"
+ #define NO_HARDWARE_PWM
+ #endif
#endif
#ifndef BACKLIGHT_ON_STATE
@@ -1300,7 +1343,7 @@ static uint16_t cie_lightness(uint16_t v) {
// range for val is [0..TIMER_TOP]. PWM pin is high while the timer count is below val.
static inline void set_pwm(uint16_t val) {
- OCRxx = val;
+ OCRxx = val;
}
#ifndef BACKLIGHT_CUSTOM_DRIVER