Import the recently announced changes:

Import the recently announced changes:
1. Carpet has now an infrastructure for multiple maps (aka "grid
patches").  Instead of a single grid hierarchy there can now be
several.  This is largely untested, because the remainder of Cactus
cannot handle multiple coordinate systems.

2. The order in which the schedule bins are called has changed.  As Ian
Hawke pointed out, the previous order during time evolution was
inconsistent.  The initial data ordering did not allow for recovering
and was not usable for progressively solving elliptic equations for
initial data.

3. Carpet now supports convergence levels.  The convergence level
specifies by how many factors of two the resolution in the parameter
file should be coarsened (or refined, if negative).  This should make
convergence tests and test runs much easier.  It is, in principle, also
possible to run several convergence levels at once.  This has not been
tested because the remainder of Cactus cannot handle multiple
resolutions.  This will be necessary for a multigrid solver, and also
for having a shadow hierarchy to determine where to refine adaptively.

4. Carpet works together with the new CoordBase domain specification
parameters.  Without these, using convergence levels will lead to very
strange results.

5. The "modes" have changed.  There are now:
        meta mode:      the whole simulation
        global mode:    one convergence level
        level mode:     one refinement level
        singlemap mode: one map on one refinement level
        local mode:     as previously
The whole mode handling has been cleaned up.

6. The regridding thorn has been cleaned up.

7. The kind of prolongation stencil is now determined in Carpet, i.e. at
a fairly hight level, instead of in CarpetLib.

8. The low-order prolongation operators have been made much more
efficient (as have previously the higher-order ones).

9. Assorted smaller changes.

For Carpet users, there should be no major incompatibilities.  The major
improvements are 3 and 4 combined.  Here is an example:

CoordBase::domainsize    = extent
CoordBase::spacing       = gridspacing
CoordBase::zero_origin_x = yes
CoordBase::zero_origin_y = yes
CoordBase::zero_origin_z = yes
CoordBase::xextent       = 20.0
CoordBase::yextent       = 20.0
CoordBase::zextent       = 20.0
CoordBase::dx            = 1.0
CoordBase::dy            = 1.0
CoordBase::dz            = 1.0

CoordBase::boundary_shiftout_x_lower = 1
CoordBase::boundary_shiftout_y_lower = 1
CoordBase::boundary_shiftout_z_lower = 1

Carpet::domain_from_coordbase   = yes
Carpet::convergence_level       = 0

grid::type         = coordbase
grid::domain       = octant
grid::avoid_origin = no

This gives you a grid that extends from the origin ("zero_origin") up to
20.0 with a grid spacing of 1.0.  Symmetry zones and boundary zones are
added automatically.  The "shiftout" says that there is no boundary
point on the origin.  The staggering parameters (not shown) default to
"no".  In order to change the resolution, only the convergence level
has to be adjusted.  Note that the old way of specifying the domain
extent still works.

For Carpet developers, one major change is the new mode handling.  As
described in 5, the looping macros (that loop over all refinement
levels, or all components) have changed.

darcs-hash:20040125135727-07bb3-51c9647c1b5080e7e180b52a1b81fa155cfd19e9.gz

2 files changed, 3 insertions, 15 deletions

diff --git a/CarpetExtra/FOWaveToyF77/interface.ccl b/CarpetExtra/FOWaveToyF77/interface.ccl
index 22f12f5db..b865b6b57 100644
--- a/CarpetExtra/FOWaveToyF77/interface.ccl
+++ b/CarpetExtra/FOWaveToyF77/interface.ccl
@@ -1,7 +1,7 @@
 # Interface definition for thorn WaveToyF77
-# $Header: /home/eschnett/C/carpet/Carpet/CarpetExtra/FOWaveToyF77/interface.ccl,v 1.8 2003/11/05 16:18:39 schnetter Exp $
+# $Header: /home/eschnett/C/carpet/Carpet/CarpetExtra/FOWaveToyF77/interface.ccl,v 1.9 2004/01/25 14:57:31 schnetter Exp $
 
-implements: fowavetoy
+implements: FOwavetoy
 inherits: boundary grid idfoscalarwave
 
 USES INCLUDE: Symmetry.h
diff --git a/CarpetExtra/WaveToyMoL/schedule.ccl b/CarpetExtra/WaveToyMoL/schedule.ccl
index 2b405ae15..7d3f01265 100644
--- a/CarpetExtra/WaveToyMoL/schedule.ccl
+++ b/CarpetExtra/WaveToyMoL/schedule.ccl
@@ -1,5 +1,5 @@
 # Schedule definitions for thorn WaveToyMoL
-# $Header: /home/eschnett/C/carpet/Carpet/CarpetExtra/WaveToyMoL/schedule.ccl,v 1.3 2003/11/05 16:18:41 schnetter Exp $
+# $Header: /home/eschnett/C/carpet/Carpet/CarpetExtra/WaveToyMoL/schedule.ccl,v 1.4 2004/01/25 14:57:31 schnetter Exp $
 
 STORAGE: scalarevolve[3]
 STORAGE: scalarevolvedot
@@ -39,15 +39,3 @@ SCHEDULE WaveToyMoL_Boundaries IN MoL_PostStep
 SCHEDULE GROUP ApplyBCs IN MoL_PostStep AFTER WaveToyMoL_Boundaries
 {
 } "Apply boundary conditions in MoL"
-
-
-
-SCHEDULE WaveToyMoL_Boundaries AT POSTRESTRICT
-{
-  LANG: Fortran
-  SYNC: scalarevolve
-} "Select boundary conditions after restricting"
-
-SCHEDULE GROUP ApplyBCs AT POSTRESTRICT AFTER WaveToyMoL_Boundaries
-{
-} "Apply boundary conditions after restricting"