diff options
author | tradke <tradke@21a6bef8-4479-4f54-8f8d-0db94a2919ef> | 2003-08-06 12:23:27 +0000 |
---|---|---|
committer | tradke <tradke@21a6bef8-4479-4f54-8f8d-0db94a2919ef> | 2003-08-06 12:23:27 +0000 |
commit | bf0225505894535a9ae36f02a3f6efa6642c5c00 (patch) | |
tree | 822a739d2aa7568d819e634ced6e26035991b1ef /doc/html/AMRucdReader.html | |
parent | dfcc3d15b8728f2827b323a77e3f8a9e57ca9904 (diff) |
Added FlexIO documentation in HTML format.
Taken from the (almost forgotten) repository /afs/aei/cvsroot/IEEEIO/doc.
Should be the same as on http://zeus.ncsa.uiuc.edu/~jshalf/FlexIO/.
git-svn-id: http://svn.cactuscode.org/arrangements/CactusExternal/FlexIO/trunk@50 21a6bef8-4479-4f54-8f8d-0db94a2919ef
Diffstat (limited to 'doc/html/AMRucdReader.html')
-rw-r--r-- | doc/html/AMRucdReader.html | 142 |
1 files changed, 142 insertions, 0 deletions
diff --git a/doc/html/AMRucdReader.html b/doc/html/AMRucdReader.html new file mode 100644 index 0000000..6bad528 --- /dev/null +++ b/doc/html/AMRucdReader.html @@ -0,0 +1,142 @@ +<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML//EN"> +<html> + <head> + <title>AMR-UCD Reader</title> + </head> + + <body bgcolor="#F0F0F0"> + <h1>AMR-UCD Reader</h1> + + Most visualization systems have no provisions for handling AMR + data. One solution is to resample all of the grids into a single + uniform sized grid. However for even a 7 level hierarchy, the + unigrid becomes far too large to be manageable and still retain + the fidelity of the original data. A second solution is use + unigrid visualization algorithms on each grid in the hierarchy and + then superimpose them on one-another. In this case geometries + from the coarser resolution datasets occlude the finer-resolution + geometry. An alternative solution is to convert the data into + hexahedral cells with the overlaps between parent levels and the + children are eliminated. This provides multi-resolution fidelity which + matches the nature of the original data but allows it to be + visualized using standard off-the-shelf visualizaton tools.<p> + + The <code>AmrUcdFileReader</code> inherits directly from the + <code><a href="AMRfileReader.html">AmrFileReader</a></code> and + all methods from its base class are public. They will be + listed again here for convenience. The only method (aside from + the constructor/destructor) that is contributed by this class is + the <a name="#GETUCD">getUcd()</a> method.<p> + + <hr> + <font face="arial,helvetica" color="#555588"><h2>The API</h2></font> + <UL> + <LI><a href="#CPP">C++ Interface</a> + <LI><a href="#C">C Interface</a> + <LI><a href="#F77">F77/F90 Interface</a> + </UL> + <hr> + <u><h3><a name="CPP">C++ Interface</a></h3></u> + <DL> + <DT><font color="#888888"><b>Constructors/Destructors</b></font> + <DL> + <DT><b>AmrUcdFileReader::AmrUcdFileReader(IObase + &filehandle)</b> <i>constructor</i> + <DD>The <i>filehandle</i> is an already + <a href="UsingC++.html#Opening">open IEEEIO or HDFIO + file</a>. This initializes the reader and attaches it to that + datafile. + <DT><b>AmrUcdFileReader::~AmrUcdFileReader()</b> <i>destructor</i> + <DD>This flushes all of the necessary file buffers. + The filehandle that the reader was bound to must be + closed separately though. + </DL> + <DT><font color="#888888"><b>Queries about File Contents</b></font> + <DL> + <DT><b>int AmrUcdFileReader::nLevels()</b> + <DD>Returns the number of levels in the AMR hierarchy. This is + the deepest the hierarchy gets in this particular datafile as + opposed to the number of levels present at this time in the + evolution (this distinction is important for adaptive depth + schemes where the number of levels will change depending on + the demands of the solver). + <DT><b>AmrUcdFileReader::getTimeRange(int &mintime,int &maxtime)</b> + <DD>Gets the range of integer timesteps stored in the file. + The nonzero mintime exists to support schemes where the + evolution is broken up among several files. + </DL> + <DT><font color="#888888"><b>Filters</b></font> + <DT>The <i><b>filter</b></i> methods listed below select grids based on + the criteria of time and level number. Grids selected by the + filter are referred to as <i><b>active grids</b></i>.<p> + <DL> + <DT><b>AmrUcdFileReader::setTime(int time)</b> + <DD>Sets the current timestep to select the data hierarchy for. + The timestep is defined with respect to the rate at which + grids change at the deepest level of the AMR hierarchy stored + in the file. Selecting a particular timestep selects a + snapshot of the hieararchy at a particular time in the + evolution. + <DT><b>AmrUcdFileReader::hideLevel(int level)</b> + <DD>By default all levels are visible and are read in when the + <code>getGrids()</code> method is called. You can hide + individual levels using this method. This is useful when + loading the entire hierarchy is either too confusing, too slow, or too + large for the workstation to handle. + <DT><b>AmrUcdFileReader::showLevel(int level)</b> + <DD>Shows a level that has otherwise been hidden. + <DT><b>AmrUcdFileReader::showAllLevels()</b> + <DD>A convenience method for making all of the levels visible. + </DL> + <DT><font color="#888888"><b>Getting the UCD Data</b></font> + <DL> + <DT><b>int AmrUcdFileReader::getUcd(FlexArray<AmrNode*> + &nodes, FlexArray<int> &cells)</b> + <DD>Gets all currently active grids and converts them into a + finite element form composed of hexahedral cells. The node + list contains the coordinates of the vertices of the cells and + the cell list contains the connectivity of the hexahedral + cells (indexed into the nodes list where the first element is + an index of <i>0</i> and the last is <i>NumNodes-1</i>). + </DL> + <DT><font color="#888888"><b>Utility and Debugging Methods</b></font> + <DT><DL> + <DT><b>AmrUcdFileReader::setDataLoadingOff()</b> + <DD>This causes the <code>getGrids()</code> methods + to read in the informational part of + the AmrGrid datastructures, but not load any data. This is + useful for just aquiring bounding box information or + estimating the memory/computational requirements for loading + the entire hierarchy. + <DT><b>AmrUcdFileReader::setDataLoadingOn()</b> + <DD>This causes the <code>getGrids()</code> methods + to read both the informational and data part of + the AmrGrid datastructures. This is the default state for + this API. + <DT><b>printGridInfo()</b> + <DD>Prints information about all grids in file to STDERR. Used + only for debugging. + <DT><b>printActiveGrids()</b> + <DD>Prints information about all <b>active</b> grids to STDERR. + Used only for debugging. + <DT><b>int debug</b> + This is a public variable that can be set to a nonzero value + in order to print additional debugging information for each + method call. This printing is turned off when it is set to zero. + </DL> + </DL> + <hr> + <h3><u><a name="C">C Interface</a></u></h3> + Not ready yet. + <hr> + <h3><u><a name="F77">F77/F90 Interface</a></u></h3> + Not ready yet. + + <hr> + <address><a href="mailto:jshalf@ariel.ncsa.uiuc.edu"></a></address> +<!-- Created: Thu Feb 4 20:37:32 CST 1999 --> +<!-- hhmts start --> +Last modified: Thu Feb 4 21:31:06 CST 1999 +<!-- hhmts end --> + </body> +</html> |