summaryrefslogtreecommitdiff
path: root/tmk_core/protocol/arm_atsam/i2c_master.c
blob: d3319ab447d25c586898fd1a05f6b14675ee74e2 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
/*
Copyright 2018 Massdrop Inc.

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#include "arm_atsam_protocol.h"

#if !defined(MD_BOOTLOADER) && defined(RGB_MATRIX_ENABLE)

#    include <string.h>

// From keyboard
#    include "config.h"
#    include "config_led.h"
#    include "matrix.h"

#    define I2C_LED_USE_DMA 1  // Set 1 to use background DMA transfers for leds, Set 0 to use inline software transfers

static uint8_t i2c_led_q[I2C_Q_SIZE];  // I2C queue circular buffer
static uint8_t i2c_led_q_s;            // Start of circular buffer
static uint8_t i2c_led_q_e;            // End of circular buffer
static uint8_t i2c_led_q_full;         // Queue full counter for reset

static uint8_t dma_sendbuf[I2C_DMA_MAX_SEND];  // Data being written to I2C

volatile uint8_t i2c_led_q_running;

#endif  // !defined(MD_BOOTLOADER) && defined(RGB_MATRIX_ENABLE)

void i2c0_init(void) {
    DBGC(DC_I2C0_INIT_BEGIN);

    CLK_set_i2c0_freq(CHAN_SERCOM_I2C0, FREQ_I2C0_DEFAULT);

    // MCU
    PORT->Group[0].PMUX[4].bit.PMUXE    = 2;
    PORT->Group[0].PMUX[4].bit.PMUXO    = 2;
    PORT->Group[0].PINCFG[8].bit.PMUXEN = 1;
    PORT->Group[0].PINCFG[9].bit.PMUXEN = 1;

    // I2C
    // Note: SW Reset handled in CLK_set_i2c0_freq clks.c

    SERCOM0->I2CM.CTRLA.bit.MODE = 5;  // Set master mode

    SERCOM0->I2CM.CTRLA.bit.SPEED    = 0;  // Set to 1 for Fast-mode Plus (FM+) up to 1 MHz
    SERCOM0->I2CM.CTRLA.bit.RUNSTDBY = 1;  // Enabled

    SERCOM0->I2CM.CTRLA.bit.ENABLE = 1;  // Enable the device
    while (SERCOM0->I2CM.SYNCBUSY.bit.ENABLE) {
        DBGC(DC_I2C0_INIT_SYNC_ENABLING);
    }  // Wait for SYNCBUSY.ENABLE to clear

    SERCOM0->I2CM.STATUS.bit.BUSSTATE = 1;  // Force into IDLE state
    while (SERCOM0->I2CM.SYNCBUSY.bit.SYSOP) {
        DBGC(DC_I2C0_INIT_SYNC_SYSOP);
    }
    while (SERCOM0->I2CM.STATUS.bit.BUSSTATE != 1) {
        DBGC(DC_I2C0_INIT_WAIT_IDLE);
    }  // Wait while not idle

    DBGC(DC_I2C0_INIT_COMPLETE);
}

uint8_t i2c0_start(uint8_t address) {
    SERCOM0->I2CM.ADDR.bit.ADDR = address;
    while (SERCOM0->I2CM.SYNCBUSY.bit.SYSOP) {
    }
    while (SERCOM0->I2CM.INTFLAG.bit.MB == 0) {
    }
    while (SERCOM0->I2CM.STATUS.bit.RXNACK) {
    }

    return 1;
}

uint8_t i2c0_transmit(uint8_t address, uint8_t *data, uint16_t length, uint16_t timeout) {
    if (!length) return 0;

    i2c0_start(address);

    while (length) {
        SERCOM0->I2CM.DATA.bit.DATA = *data;
        while (SERCOM0->I2CM.INTFLAG.bit.MB == 0) {
        }
        while (SERCOM0->I2CM.STATUS.bit.RXNACK) {
        }

        data++;
        length--;
    }

    i2c0_stop();

    return 1;
}

void i2c0_stop(void) {
    if (SERCOM0->I2CM.STATUS.bit.CLKHOLD || SERCOM0->I2CM.INTFLAG.bit.MB == 1 || SERCOM0->I2CM.STATUS.bit.BUSSTATE != 1) {
        SERCOM0->I2CM.CTRLB.bit.CMD = 3;
        while (SERCOM0->I2CM.SYNCBUSY.bit.SYSOP)
            ;
        while (SERCOM0->I2CM.STATUS.bit.CLKHOLD)
            ;
        while (SERCOM0->I2CM.INTFLAG.bit.MB)
            ;
        while (SERCOM0->I2CM.STATUS.bit.BUSSTATE != 1)
            ;
    }
}

#if !defined(MD_BOOTLOADER) && defined(RGB_MATRIX_ENABLE)
void i2c1_init(void) {
    DBGC(DC_I2C1_INIT_BEGIN);

    CLK_set_i2c1_freq(CHAN_SERCOM_I2C1, FREQ_I2C1_DEFAULT);

    /* MCU */
    PORT->Group[0].PMUX[8].bit.PMUXE     = 2;
    PORT->Group[0].PMUX[8].bit.PMUXO     = 2;
    PORT->Group[0].PINCFG[16].bit.PMUXEN = 1;
    PORT->Group[0].PINCFG[17].bit.PMUXEN = 1;

    /* I2C */
    // Note: SW Reset handled in CLK_set_i2c1_freq clks.c

    SERCOM1->I2CM.CTRLA.bit.MODE     = 5;  // MODE: Set master mode (No sync)
    SERCOM1->I2CM.CTRLA.bit.SPEED    = 1;  // SPEED: Fm+ up to 1MHz (No sync)
    SERCOM1->I2CM.CTRLA.bit.RUNSTDBY = 1;  // RUNSTBY: Enabled (No sync)

    SERCOM1->I2CM.CTRLB.bit.SMEN = 1;  // SMEN: Smart mode enabled (For DMA)(No sync)

    NVIC_EnableIRQ(SERCOM1_0_IRQn);
    SERCOM1->I2CM.INTENSET.bit.ERROR = 1;

    SERCOM1->I2CM.CTRLA.bit.ENABLE = 1;  // ENABLE: Enable the device (sync SYNCBUSY.ENABLE)
    while (SERCOM1->I2CM.SYNCBUSY.bit.ENABLE) {
        DBGC(DC_I2C1_INIT_SYNC_ENABLING);
    }  // Wait for SYNCBUSY.ENABLE to clear

    SERCOM1->I2CM.STATUS.bit.BUSSTATE = 1;  // BUSSTATE: Force into IDLE state (sync SYNCBUSY.SYSOP)
    while (SERCOM1->I2CM.SYNCBUSY.bit.SYSOP) {
        DBGC(DC_I2C1_INIT_SYNC_SYSOP);
    }
    while (SERCOM1->I2CM.STATUS.bit.BUSSTATE != 1) {
        DBGC(DC_I2C1_INIT_WAIT_IDLE);
    }  // Wait while not idle

    DBGC(DC_I2C1_INIT_COMPLETE);
}

uint8_t i2c1_start(uint8_t address) {
    SERCOM1->I2CM.ADDR.bit.ADDR = address;
    while (SERCOM1->I2CM.SYNCBUSY.bit.SYSOP) {
    }
    while (SERCOM1->I2CM.INTFLAG.bit.MB == 0) {
    }
    while (SERCOM1->I2CM.STATUS.bit.RXNACK) {
    }

    return 1;
}

uint8_t i2c1_transmit(uint8_t address, uint8_t *data, uint16_t length, uint16_t timeout) {
    if (!length) return 0;

    i2c1_start(address);

    while (length) {
        SERCOM1->I2CM.DATA.bit.DATA = *data;
        while (SERCOM1->I2CM.INTFLAG.bit.MB == 0) {
        }
        while (SERCOM1->I2CM.STATUS.bit.RXNACK) {
        }

        data++;
        length--;
    }

    i2c1_stop();

    return 1;
}

void i2c1_stop(void) {
    if (SERCOM1->I2CM.STATUS.bit.CLKHOLD || SERCOM1->I2CM.INTFLAG.bit.MB == 1 || SERCOM1->I2CM.STATUS.bit.BUSSTATE != 1) {
        SERCOM1->I2CM.CTRLB.bit.CMD = 3;
        while (SERCOM1->I2CM.SYNCBUSY.bit.SYSOP)
            ;
        while (SERCOM1->I2CM.STATUS.bit.CLKHOLD)
            ;
        while (SERCOM1->I2CM.INTFLAG.bit.MB)
            ;
        while (SERCOM1->I2CM.STATUS.bit.BUSSTATE != 1)
            ;
    }
}

void i2c_led_send_CRWL(uint8_t drvid) {
    uint8_t i2cdata[] = {ISSI3733_CMDRWL, ISSI3733_CMDRWL_WRITE_ENABLE_ONCE};
    i2c1_transmit(issidrv[drvid].addr, i2cdata, sizeof(i2cdata), 0);
}

void i2c_led_select_page(uint8_t drvid, uint8_t pageno) {
    uint8_t i2cdata[] = {ISSI3733_CMDR, pageno};
    i2c1_transmit(issidrv[drvid].addr, i2cdata, sizeof(i2cdata), 0);
}

void i2c_led_send_GCR(uint8_t drvid) {
    uint8_t i2cdata[] = {ISSI3733_GCCR, 0x00};

    if (gcr_actual > LED_GCR_MAX) gcr_actual = LED_GCR_MAX;
    i2cdata[1] = gcr_actual;

    i2c1_transmit(issidrv[drvid].addr, i2cdata, sizeof(i2cdata), 0);
}

void i2c_led_send_onoff(uint8_t drvid) {
#    if I2C_LED_USE_DMA != 1
    if (!i2c_led_q_running) {
#    endif
        i2c_led_send_CRWL(drvid);
        i2c_led_select_page(drvid, 0);
#    if I2C_LED_USE_DMA != 1
    }
#    endif

    *issidrv[drvid].onoff = 0;  // Force start location offset to zero
    i2c1_transmit(issidrv[drvid].addr, issidrv[drvid].onoff, ISSI3733_PG0_BYTES, 0);
}

void i2c_led_send_mode_op_gcr(uint8_t drvid, uint8_t mode, uint8_t operation) {
    uint8_t i2cdata[] = {ISSI3733_CR, mode | operation, gcr_actual};
    i2c1_transmit(issidrv[drvid].addr, i2cdata, sizeof(i2cdata), 0);
}

void i2c_led_send_pur_pdr(uint8_t drvid, uint8_t pur, uint8_t pdr) {
    uint8_t i2cdata[] = {ISSI3733_SWYR_PUR, pur, pdr};

    i2c1_transmit(issidrv[drvid].addr, i2cdata, sizeof(i2cdata), 0);
}

void i2c_led_send_pwm(uint8_t drvid) {
#    if I2C_LED_USE_DMA != 1
    if (!i2c_led_q_running) {
#    endif
        i2c_led_send_CRWL(drvid);
        i2c_led_select_page(drvid, 0);
#    if I2C_LED_USE_DMA != 1
    }
#    endif

    *issidrv[drvid].pwm = 0;  // Force start location offset to zero
    i2c1_transmit(issidrv[drvid].addr, issidrv[drvid].pwm, ISSI3733_PG1_BYTES, 0);
}

uint8_t I2C3733_Init_Control(void) {
    DBGC(DC_I2C3733_INIT_CONTROL_BEGIN);

    // Hardware state shutdown on boot
    // USB state machine will enable driver when communication is ready
    I2C3733_Control_Set(0);

    wait_ms(1);

    sr_exp_data.bit.IRST = 0;
    SR_EXP_WriteData();

    wait_ms(1);

    DBGC(DC_I2C3733_INIT_CONTROL_COMPLETE);

    return 1;
}

uint8_t I2C3733_Init_Drivers(void) {
    DBGC(DC_I2C3733_INIT_DRIVERS_BEGIN);

    gcr_actual      = ISSI3733_GCR_DEFAULT;
    gcr_actual_last = gcr_actual;

    if (gcr_actual > LED_GCR_MAX) gcr_actual = LED_GCR_MAX;
    gcr_desired = gcr_actual;

    // Set up master device
    i2c_led_send_CRWL(0);
    i2c_led_select_page(0, 3);
    i2c_led_send_mode_op_gcr(0, 0, ISSI3733_CR_SSD_NORMAL);  // No SYNC due to brightness mismatch with second driver

    // Set up slave device
    i2c_led_send_CRWL(1);
    i2c_led_select_page(1, 3);
    i2c_led_send_mode_op_gcr(1, 0, ISSI3733_CR_SSD_NORMAL);  // No SYNC due to brightness mismatch with first driver and slight flicker at rgb values 1,2

    i2c_led_send_CRWL(0);
    i2c_led_select_page(0, 3);
    i2c_led_send_pur_pdr(0, ISSI3733_SWYR_PUR_8000, ISSI3733_CSXR_PDR_8000);

    i2c_led_send_CRWL(1);
    i2c_led_select_page(1, 3);
    i2c_led_send_pur_pdr(1, ISSI3733_SWYR_PUR_8000, ISSI3733_CSXR_PDR_8000);

    DBGC(DC_I2C3733_INIT_DRIVERS_COMPLETE);

    return 1;
}

void I2C_DMAC_LED_Init(void) {
    Dmac *dmac = DMAC;

    DBGC(DC_I2C_DMAC_LED_INIT_BEGIN);

    // Disable device
    dmac->CTRL.bit.DMAENABLE = 0;  // Disable DMAC
    while (dmac->CTRL.bit.DMAENABLE) {
    }                          // Wait for disabled state in case of ongoing transfers
    dmac->CTRL.bit.SWRST = 1;  // Software Reset DMAC
    while (dmac->CTRL.bit.SWRST) {
    }  // Wait for software reset to complete

    // Configure device
    dmac->BASEADDR.reg = (uint32_t)&dmac_desc;     // Set descriptor base address
    dmac->WRBADDR.reg  = (uint32_t)&dmac_desc_wb;  // Set descriptor write back address
    dmac->CTRL.reg |= 0x0f00;                      // Handle all priorities (LVL0-3)

    // Disable channel
    dmac->Channel[0].CHCTRLA.bit.ENABLE = 0;  // Disable the channel
    while (dmac->Channel[0].CHCTRLA.bit.ENABLE) {
    }                                        // Wait for disabled state in case of ongoing transfers
    dmac->Channel[0].CHCTRLA.bit.SWRST = 1;  // Software Reset the channel
    while (dmac->Channel[0].CHCTRLA.bit.SWRST) {
    }  // Wait for software reset to complete

    // Configure channel
    dmac->Channel[0].CHCTRLA.bit.THRESHOLD = 0;                   // 1BEAT
    dmac->Channel[0].CHCTRLA.bit.BURSTLEN  = 0;                   // SINGLE
    dmac->Channel[0].CHCTRLA.bit.TRIGACT   = 2;                   // BURST
    dmac->Channel[0].CHCTRLA.bit.TRIGSRC   = SERCOM1_DMAC_ID_TX;  // Trigger source
    dmac->Channel[0].CHCTRLA.bit.RUNSTDBY  = 1;                   // Run in standby

    NVIC_EnableIRQ(DMAC_0_IRQn);
    dmac->Channel[0].CHINTENSET.bit.TCMPL = 1;
    dmac->Channel[0].CHINTENSET.bit.TERR  = 1;

    // Enable device
    dmac->CTRL.bit.DMAENABLE = 1;  // Enable DMAC
    while (dmac->CTRL.bit.DMAENABLE == 0) {
    }  // Wait for enable state

    DBGC(DC_I2C_DMAC_LED_INIT_COMPLETE);
}

// state = 1 enable
// state = 0 disable
void I2C3733_Control_Set(uint8_t state) {
    DBGC(DC_I2C3733_CONTROL_SET_BEGIN);

    sr_exp_data.bit.SDB_N = (state == 1 ? 1 : 0);
    SR_EXP_WriteData();

    DBGC(DC_I2C3733_CONTROL_SET_COMPLETE);
}

void i2c_led_desc_defaults(void) {
    dmac_desc.BTCTRL.bit.STEPSIZE = 0;  // SRCINC used in favor for auto 1 inc
    dmac_desc.BTCTRL.bit.STEPSEL  = 0;  // SRCINC used in favor for auto 1 inc
    dmac_desc.BTCTRL.bit.DSTINC   = 0;  // The Destination Address Increment is disabled
    dmac_desc.BTCTRL.bit.SRCINC   = 1;  // The Source Address Increment is enabled (Inc by 1)
    dmac_desc.BTCTRL.bit.BEATSIZE = 0;  // 8-bit bus transfer
    dmac_desc.BTCTRL.bit.BLOCKACT = 0;  // Channel will be disabled if it is the last block transfer in the transaction
    dmac_desc.BTCTRL.bit.EVOSEL   = 0;  // Event generation disabled
    dmac_desc.BTCTRL.bit.VALID    = 1;  // Set dmac valid
}

void i2c_led_prepare_send_dma(uint8_t *data, uint8_t len) {
    i2c_led_desc_defaults();

    dmac_desc.BTCNT.reg    = len;
    dmac_desc.SRCADDR.reg  = (uint32_t)data + len;
    dmac_desc.DSTADDR.reg  = (uint32_t)&SERCOM1->I2CM.DATA.reg;
    dmac_desc.DESCADDR.reg = 0;
}

void i2c_led_begin_dma(uint8_t drvid) {
    DMAC->Channel[0].CHCTRLA.bit.ENABLE = 1;  // Enable the channel

    SERCOM1->I2CM.ADDR.reg = (dmac_desc.BTCNT.reg << 16) | 0x2000 | issidrv[drvid].addr;  // Begin transfer
}

void i2c_led_send_CRWL_dma(uint8_t drvid) {
    *(dma_sendbuf + 0) = ISSI3733_CMDRWL;
    *(dma_sendbuf + 1) = ISSI3733_CMDRWL_WRITE_ENABLE_ONCE;
    i2c_led_prepare_send_dma(dma_sendbuf, 2);

    i2c_led_begin_dma(drvid);
}

void i2c_led_select_page_dma(uint8_t drvid, uint8_t pageno) {
    *(dma_sendbuf + 0) = ISSI3733_CMDR;
    *(dma_sendbuf + 1) = pageno;
    i2c_led_prepare_send_dma(dma_sendbuf, 2);

    i2c_led_begin_dma(drvid);
}

void i2c_led_send_GCR_dma(uint8_t drvid) {
    *(dma_sendbuf + 0) = ISSI3733_GCCR;
    *(dma_sendbuf + 1) = gcr_actual;
    i2c_led_prepare_send_dma(dma_sendbuf, 2);

    i2c_led_begin_dma(drvid);
}

void i2c_led_send_pwm_dma(uint8_t drvid) {
    // Note: This copies the CURRENT pwm buffer, which may be getting modified
    memcpy(dma_sendbuf, issidrv[drvid].pwm, ISSI3733_PG1_BYTES);
    *dma_sendbuf = 0;  // Force start location offset to zero
    i2c_led_prepare_send_dma(dma_sendbuf, ISSI3733_PG1_BYTES);

    i2c_led_begin_dma(drvid);
}

void i2c_led_send_onoff_dma(uint8_t drvid) {
    // Note: This copies the CURRENT onoff buffer, which may be getting modified
    memcpy(dma_sendbuf, issidrv[drvid].onoff, ISSI3733_PG0_BYTES);
    *dma_sendbuf = 0;  // Force start location offset to zero
    i2c_led_prepare_send_dma(dma_sendbuf, ISSI3733_PG0_BYTES);

    i2c_led_begin_dma(drvid);
}

void i2c_led_q_init(void) {
    memset(i2c_led_q, 0, I2C_Q_SIZE);
    i2c_led_q_s       = 0;
    i2c_led_q_e       = 0;
    i2c_led_q_running = 0;
    i2c_led_q_full    = 0;
}

uint8_t i2c_led_q_isempty(void) { return i2c_led_q_s == i2c_led_q_e; }

uint8_t i2c_led_q_size(void) { return (i2c_led_q_e - i2c_led_q_s) % I2C_Q_SIZE; }

uint8_t i2c_led_q_available(void) {
    return I2C_Q_SIZE - i2c_led_q_size() - 1;  // Never allow end to meet start
}

void i2c_led_q_add(uint8_t cmd) {
    // WARNING: Always request room before adding commands!

    // Assign command
    i2c_led_q[i2c_led_q_e] = cmd;

    i2c_led_q_e = (i2c_led_q_e + 1) % I2C_Q_SIZE;  // Move end up one or wrap
}

void i2c_led_q_s_advance(void) {
    i2c_led_q_s = (i2c_led_q_s + 1) % I2C_Q_SIZE;  // Move start up one or wrap
}

// Always request room before adding commands
// PS: In case the queue somehow gets filled, it will reset if it can not clear up
// PS: Could only get this to happen through unrealistic timings to overload the I2C bus
uint8_t i2c_led_q_request_room(uint8_t request_size) {
    if (request_size > i2c_led_q_available()) {
        i2c_led_q_full++;

        if (i2c_led_q_full >= 100)  // Give the queue a chance to clear up
        {
            DBG_LED_ON;
            I2C_DMAC_LED_Init();
            i2c_led_q_init();
            return 1;
        }

        return 0;
    }

    i2c_led_q_full = 0;

    return 1;
}

uint8_t i2c_led_q_run(void) {
    if (i2c_led_q_isempty()) {
        i2c_led_q_running = 0;
        return 0;
    }

    if (i2c_led_q_running) return 1;

    i2c_led_q_running = 1;

#    if I2C_LED_USE_DMA != 1
    while (!i2c_led_q_isempty()) {
#    endif
        // run command
        if (i2c_led_q[i2c_led_q_s] == I2C_Q_CRWL) {
            i2c_led_q_s_advance();
            uint8_t drvid = i2c_led_q[i2c_led_q_s];
#    if I2C_LED_USE_DMA == 1
            i2c_led_send_CRWL_dma(drvid);
#    else
        i2c_led_send_CRWL(drvid);
#    endif
        } else if (i2c_led_q[i2c_led_q_s] == I2C_Q_PAGE_SELECT) {
            i2c_led_q_s_advance();
            uint8_t drvid = i2c_led_q[i2c_led_q_s];
            i2c_led_q_s_advance();
            uint8_t page = i2c_led_q[i2c_led_q_s];
#    if I2C_LED_USE_DMA == 1
            i2c_led_select_page_dma(drvid, page);
#    else
        i2c_led_select_page(drvid, page);
#    endif
        } else if (i2c_led_q[i2c_led_q_s] == I2C_Q_PWM) {
            i2c_led_q_s_advance();
            uint8_t drvid = i2c_led_q[i2c_led_q_s];
#    if I2C_LED_USE_DMA == 1
            i2c_led_send_pwm_dma(drvid);
#    else
        i2c_led_send_pwm(drvid);
#    endif
        } else if (i2c_led_q[i2c_led_q_s] == I2C_Q_GCR) {
            i2c_led_q_s_advance();
            uint8_t drvid = i2c_led_q[i2c_led_q_s];
#    if I2C_LED_USE_DMA == 1
            i2c_led_send_GCR_dma(drvid);
#    else
        i2c_led_send_GCR(drvid);
#    endif
        } else if (i2c_led_q[i2c_led_q_s] == I2C_Q_ONOFF) {
            i2c_led_q_s_advance();
            uint8_t drvid = i2c_led_q[i2c_led_q_s];
#    if I2C_LED_USE_DMA == 1
            i2c_led_send_onoff_dma(drvid);
#    else
        i2c_led_send_onoff(drvid);
#    endif
        }

        i2c_led_q_s_advance();  // Advance last run command or if the command byte was not serviced

#    if I2C_LED_USE_DMA != 1
    }

    i2c_led_q_running = 0;
#    endif

    return 1;
}
#endif  // !defined(MD_BOOTLOADER) && defined(RGB_MATRIX_ENABLE)