summaryrefslogtreecommitdiff
path: root/tmk_core/protocol
diff options
context:
space:
mode:
Diffstat (limited to 'tmk_core/protocol')
-rw-r--r--tmk_core/protocol/arm_atsam/d51_util.c124
-rw-r--r--tmk_core/protocol/arm_atsam/d51_util.h80
-rw-r--r--tmk_core/protocol/arm_atsam/i2c_master.c10
-rw-r--r--tmk_core/protocol/arm_atsam/led_matrix.c4
-rw-r--r--tmk_core/protocol/arm_atsam/main_arm_atsam.c14
-rw-r--r--tmk_core/protocol/arm_atsam/spi.c105
-rw-r--r--tmk_core/protocol/arm_atsam/spi.h39
-rw-r--r--tmk_core/protocol/arm_atsam/usb/usb2422.c85
8 files changed, 278 insertions, 183 deletions
diff --git a/tmk_core/protocol/arm_atsam/d51_util.c b/tmk_core/protocol/arm_atsam/d51_util.c
index bb63a94814..ea42258575 100644
--- a/tmk_core/protocol/arm_atsam/d51_util.c
+++ b/tmk_core/protocol/arm_atsam/d51_util.c
@@ -1,8 +1,11 @@
#include "d51_util.h"
-//Display unsigned 32-bit number through m15
-//Read as follows: 1230 = || ||| |||| | (note always ending toggle)
-void m15_print(uint32_t x)
+static volatile uint32_t w;
+
+//Display unsigned 32-bit number by port toggling DBG_1 (to view on a scope)
+//Read as follows: 1230 = | | | | | | || (note zero is fast double toggle)
+#define DBG_PAUSE 5
+void dbg_print(uint32_t x)
{
int8_t t;
uint32_t n;
@@ -26,24 +29,34 @@ void m15_print(uint32_t x)
while (p2--) p *= 10;
n = x / p;
x -= n * p;
- while (n > 0)
+ if (!n)
{
- m15_on;
+ DBG_1_ON;
+ DBG_1_OFF;
+ DBG_1_ON;
+ DBG_1_OFF;
n--;
- m15_off;
}
- //Will always end with an extra toggle
- m15_on;
+ else
+ {
+ while (n > 0)
+ {
+ DBG_1_ON;
+ DBG_1_OFF;
+ n--;
+ }
+ }
+
t--;
- m15_off;
}
+
+ for (w = DBG_PAUSE; w; w--); //Long pause after number is complete
}
//Display unsigned 32-bit number through debug led
//Read as follows: 1230 = [*] [* *] [* * *] [**] (note zero is fast double flash)
#define DLED_ONTIME 1000000
#define DLED_PAUSE 1500000
-volatile uint32_t w;
void dled_print(uint32_t x, uint8_t long_pause)
{
int8_t t;
@@ -70,13 +83,13 @@ void dled_print(uint32_t x, uint8_t long_pause)
x -= n * p;
if (!n)
{
- led_on;
+ DBG_LED_ON;
for (w = DLED_ONTIME / 4; w; w--);
- led_off;
+ DBG_LED_OFF;
for (w = DLED_ONTIME / 4; w; w--);
- led_on;
+ DBG_LED_ON;
for (w = DLED_ONTIME / 4; w; w--);
- led_off;
+ DBG_LED_OFF;
for (w = DLED_ONTIME / 4; w; w--);
n--;
}
@@ -84,9 +97,9 @@ void dled_print(uint32_t x, uint8_t long_pause)
{
while (n > 0)
{
- led_on;
+ DBG_LED_ON;
for (w = DLED_ONTIME; w; w--);
- led_off;
+ DBG_LED_OFF;
for (w = DLED_ONTIME / 2; w; w--);
n--;
}
@@ -102,11 +115,52 @@ void dled_print(uint32_t x, uint8_t long_pause)
}
}
-#ifdef DEBUG_BOOT_TRACING
+#ifdef DEBUG_BOOT_TRACING_ENABLE
volatile uint32_t debug_code;
-void EIC_15_Handler()
+//These macros are for compile time substitution
+#define DEBUG_BOOT_TRACING_EXTINTn (DEBUG_BOOT_TRACING_PIN % _U_(0x10))
+#define DEBUG_BOOT_TRACING_EXTINTb (_U_(0x1) << DEBUG_BOOT_TRACING_EXTINTn)
+#define DEBUG_BOOT_TRACING_CONFIG_INDn (DEBUG_BOOT_TRACING_EXTINTn / _U_(0x8))
+#define DEBUG_BOOT_TRACING_CONFIG_SENSEn (DEBUG_BOOT_TRACING_EXTINTn % _U_(0x8))
+#define DEBUG_BOOT_TRACING_CONFIG_SENSEb (DEBUG_BOOT_TRACING_CONFIG_SENSEn * _U_(0x4))
+#define DEBUG_BOOT_TRACING_IRQn (EIC_0_IRQn + DEBUG_BOOT_TRACING_EXTINTn)
+
+//These macros perform PORT+PIN definition translation to IRQn in the preprocessor
+#define PORTPIN_TO_IRQn_EXPAND(def) def
+#define PORTPIN_TO_IRQn_DEF(def) PORTPIN_TO_IRQn_EXPAND(def)
+#if DEBUG_BOOT_TRACING_PIN < 10
+#define PORTPIN_TO_IRQn_TODEF(port, pin) PORTPIN_TO_IRQn_DEF(PIN_ ## port ## 0 ## pin ## A_EIC_EXTINT_NUM)
+#else
+#define PORTPIN_TO_IRQn_TODEF(port, pin) PORTPIN_TO_IRQn_DEF(PIN_ ## port ## pin ## A_EIC_EXTINT_NUM)
+#endif
+#define PORTPIN_TO_IRQn(port, pin) PORTPIN_TO_IRQn_TODEF(port, pin)
+
+//These macros perform function name output in the preprocessor
+#define DEBUG_BOOT_TRACING_HANDLER_CONCAT(irq) void EIC_ ## irq ## _Handler(void)
+#define DEBUG_BOOT_TRACING_HANDLER(irq) DEBUG_BOOT_TRACING_HANDLER_CONCAT(irq)
+
+//To generate the function name of the IRQ handler catching boot tracing,
+// certain macros must be undefined, so save their current values to macro stack
+#pragma push_macro("PA")
+#pragma push_macro("PB")
+#pragma push_macro("_L_")
+
+//Undefine / redefine pushed macros
+#undef PA
+#undef PB
+#undef _L_
+#define _L_(x) x
+
+//Perform the work and output
+//Ex: PORT PB, PIN 31 = void EIC_15_Handler(void)
+DEBUG_BOOT_TRACING_HANDLER(PORTPIN_TO_IRQn(DEBUG_BOOT_TRACING_PORT, DEBUG_BOOT_TRACING_PIN))
+
+//Restore macros
+#pragma pop_macro("PA")
+#pragma pop_macro("PB")
+#pragma pop_macro("_L_")
{
//This is only for non-functional keyboard troubleshooting and should be disabled after boot
//Intention is to lock up the keyboard here with repeating debug led code
@@ -120,13 +174,13 @@ void debug_code_init(void)
{
DBGC(DC_UNSET);
- //Configure Ports for EIC on PB31
- PORT->Group[1].DIRCLR.reg = 1 << 31; //Input
- PORT->Group[1].OUTSET.reg = 1 << 31; //High
- PORT->Group[1].PINCFG[31].bit.INEN = 1; //Input Enable
- PORT->Group[1].PINCFG[31].bit.PULLEN = 1; //Pull Enable
- PORT->Group[1].PINCFG[31].bit.PMUXEN = 1; //Mux Enable
- PORT->Group[1].PMUX[15].bit.PMUXO = 0; //Mux A
+ //Configure Ports for EIC
+ PORT->Group[DEBUG_BOOT_TRACING_PORT].DIRCLR.reg = 1 << DEBUG_BOOT_TRACING_PIN; //Input
+ PORT->Group[DEBUG_BOOT_TRACING_PORT].OUTSET.reg = 1 << DEBUG_BOOT_TRACING_PIN; //High
+ PORT->Group[DEBUG_BOOT_TRACING_PORT].PINCFG[DEBUG_BOOT_TRACING_PIN].bit.INEN = 1; //Input Enable
+ PORT->Group[DEBUG_BOOT_TRACING_PORT].PINCFG[DEBUG_BOOT_TRACING_PIN].bit.PULLEN = 1; //Pull Enable
+ PORT->Group[DEBUG_BOOT_TRACING_PORT].PINCFG[DEBUG_BOOT_TRACING_PIN].bit.PMUXEN = 1; //Mux Enable
+ PORT->Group[DEBUG_BOOT_TRACING_PORT].PMUX[DEBUG_BOOT_TRACING_PIN / 2].bit.PMUXO = 0; //Mux A
//Enable CLK_EIC_APB
MCLK->APBAMASK.bit.EIC_ = 1;
@@ -134,25 +188,33 @@ void debug_code_init(void)
//Configure EIC
EIC->CTRLA.bit.SWRST = 1;
while (EIC->SYNCBUSY.bit.SWRST) {}
- EIC->ASYNCH.reg = 1 << 15;
- EIC->INTENSET.reg = 1 << 15;
- EIC->CONFIG[1].bit.SENSE7 = 2;
+ EIC->ASYNCH.reg = DEBUG_BOOT_TRACING_EXTINTb;
+ EIC->INTENSET.reg = DEBUG_BOOT_TRACING_EXTINTb;
+ EIC->CONFIG[DEBUG_BOOT_TRACING_CONFIG_INDn].reg |= (EIC_CONFIG_SENSE0_FALL_Val << DEBUG_BOOT_TRACING_CONFIG_SENSEb);
EIC->CTRLA.bit.ENABLE = 1;
while (EIC->SYNCBUSY.bit.ENABLE) {}
//Enable EIC IRQ
- NVIC_EnableIRQ(EIC_15_IRQn);
+ NVIC_EnableIRQ(DEBUG_BOOT_TRACING_IRQn);
}
void debug_code_disable(void)
{
//Disable EIC IRQ
- NVIC_DisableIRQ(EIC_15_IRQn);
+ NVIC_DisableIRQ(DEBUG_BOOT_TRACING_IRQn);
//Disable EIC
EIC->CTRLA.bit.ENABLE = 0;
while (EIC->SYNCBUSY.bit.ENABLE) {}
+ //Default port configuration
+ PORT->Group[DEBUG_BOOT_TRACING_PORT].DIRCLR.reg = 1 << DEBUG_BOOT_TRACING_PIN; //Input
+ PORT->Group[DEBUG_BOOT_TRACING_PORT].OUTCLR.reg = 1 << DEBUG_BOOT_TRACING_PIN; //Low
+ PORT->Group[DEBUG_BOOT_TRACING_PORT].PINCFG[DEBUG_BOOT_TRACING_PIN].bit.INEN = 0; //Input Disable
+ PORT->Group[DEBUG_BOOT_TRACING_PORT].PINCFG[DEBUG_BOOT_TRACING_PIN].bit.PULLEN = 0; //Pull Disable
+ PORT->Group[DEBUG_BOOT_TRACING_PORT].PINCFG[DEBUG_BOOT_TRACING_PIN].bit.PMUXEN = 0; //Mux Disable
+ PORT->Group[DEBUG_BOOT_TRACING_PORT].PMUX[DEBUG_BOOT_TRACING_PIN / 2].bit.PMUXO = 0; //Mux A
+
//Disable CLK_EIC_APB
MCLK->APBAMASK.bit.EIC_ = 0;
}
@@ -162,4 +224,4 @@ void debug_code_disable(void)
void debug_code_init(void) {}
void debug_code_disable(void) {}
-#endif //DEBUG_BOOT_TRACING
+#endif //DEBUG_BOOT_TRACING_ENABLE
diff --git a/tmk_core/protocol/arm_atsam/d51_util.h b/tmk_core/protocol/arm_atsam/d51_util.h
index 7a35f7989f..71431942c7 100644
--- a/tmk_core/protocol/arm_atsam/d51_util.h
+++ b/tmk_core/protocol/arm_atsam/d51_util.h
@@ -20,37 +20,65 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "samd51j18a.h"
-//TODO: PS: Should bring these ports out to keyboard level configuration
-
-//Debug LED PA27
-#define led_ena REG_PORT_DIRSET0 = 0x08000000 //PA27 Output
-#define led_on REG_PORT_OUTSET0 = 0x08000000 //PA27 High
-#define led_off REG_PORT_OUTCLR0 = 0x08000000 //PA27 Low
-
-//Debug Port PB30
-#define m15_ena REG_PORT_DIRSET1 = 0x40000000 //PB30 Output
-#define m15_on REG_PORT_OUTSET1 = 0x40000000 //PB30 High
-#define m15_off REG_PORT_OUTCLR1 = 0x40000000 //PB30 Low
-
-//Debug Port PB23
-#define m27_ena REG_PORT_DIRSET1 = 0x800000 //PB23 Output
-#define m27_on REG_PORT_OUTSET1 = 0x800000 //PB23 High
-#define m27_off REG_PORT_OUTCLR1 = 0x800000 //PB23 Low
-
-//Debug Port PB31
-#define m28_ena REG_PORT_DIRSET1 = 0x80000000 //PB31 Output
-#define m28_on REG_PORT_OUTSET1 = 0x80000000 //PB31 High
-#define m28_off REG_PORT_OUTCLR1 = 0x80000000 //PB31 Low
-
-#define m15_loop(M15X) {uint8_t M15L=M15X; while(M15L--){m15_on;CLK_delay_us(1);m15_off;}}
+/* Debug LED */
+#if DEBUG_LED_ENABLE == 1
+#define DBG_LED_ENA PORT->Group[DEBUG_LED_PORT].DIRSET.reg = (1 << DEBUG_LED_PIN)
+#define DBG_LED_DIS PORT->Group[DEBUG_LED_PORT].DIRCLR.reg = (1 << DEBUG_LED_PIN)
+#define DBG_LED_ON PORT->Group[DEBUG_LED_PORT].OUTSET.reg = (1 << DEBUG_LED_PIN)
+#define DBG_LED_OFF PORT->Group[DEBUG_LED_PORT].OUTCLR.reg = (1 << DEBUG_LED_PIN)
+#else
+#define DBG_LED_ENA
+#define DBG_LED_DIS
+#define DBG_LED_ON
+#define DBG_LED_OFF
+#endif
+
+/* Debug Port 1 */
+#if DEBUG_PORT1_ENABLE == 1
+#define DBG_1_ENA PORT->Group[DEBUG_PORT1_PORT].DIRSET.reg = (1 << DEBUG_PORT1_PIN)
+#define DBG_1_DIS PORT->Group[DEBUG_PORT1_PORT].DIRCLR.reg = (1 << DEBUG_PORT1_PIN)
+#define DBG_1_ON PORT->Group[DEBUG_PORT1_PORT].OUTSET.reg = (1 << DEBUG_PORT1_PIN)
+#define DBG_1_OFF PORT->Group[DEBUG_PORT1_PORT].OUTCLR.reg = (1 << DEBUG_PORT1_PIN)
+#else
+#define DBG_1_ENA
+#define DBG_1_DIS
+#define DBG_1_ON
+#define DBG_1_OFF
+#endif
+
+/* Debug Port 2 */
+#if DEBUG_PORT2_ENABLE == 1
+#define DBG_2_ENA PORT->Group[DEBUG_PORT2_PORT].DIRSET.reg = (1 << DEBUG_PORT2_PIN)
+#define DBG_2_DIS PORT->Group[DEBUG_PORT2_PORT].DIRCLR.reg = (1 << DEBUG_PORT2_PIN)
+#define DBG_2_ON PORT->Group[DEBUG_PORT2_PORT].OUTSET.reg = (1 << DEBUG_PORT2_PIN)
+#define DBG_2_OFF PORT->Group[DEBUG_PORT2_PORT].OUTCLR.reg = (1 << DEBUG_PORT2_PIN)
+#else
+#define DBG_2_ENA
+#define DBG_2_DIS
+#define DBG_2_ON
+#define DBG_2_OFF
+#endif
+
+/* Debug Port 3 */
+#if DEBUG_PORT3_ENABLE == 1
+#define DBG_3_ENA PORT->Group[DEBUG_PORT3_PORT].DIRSET.reg = (1 << DEBUG_PORT3_PIN)
+#define DBG_3_DIS PORT->Group[DEBUG_PORT3_PORT].DIRCLR.reg = (1 << DEBUG_PORT3_PIN)
+#define DBG_3_ON PORT->Group[DEBUG_PORT3_PORT].OUTSET.reg = (1 << DEBUG_PORT3_PIN)
+#define DBG_3_OFF PORT->Group[DEBUG_PORT3_PORT].OUTCLR.reg = (1 << DEBUG_PORT3_PIN)
+#else
+#define DBG_3_ENA
+#define DBG_3_DIS
+#define DBG_3_ON
+#define DBG_3_OFF
+#endif
-void m15_print(uint32_t x);
+void dbg_print(uint32_t x);
void dled_print(uint32_t x, uint8_t long_pause);
void debug_code_init(void);
void debug_code_disable(void);
-#ifdef DEBUG_BOOT_TRACING
+#ifdef DEBUG_BOOT_TRACING_ENABLE
#define DBGC(n) debug_code = n
@@ -190,6 +218,6 @@ enum debug_code_list {
#define DBGC(n) {}
-#endif //DEBUG_BOOT_TRACING
+#endif //DEBUG_BOOT_TRACING_ENABLE
#endif //_D51_UTIL_H_
diff --git a/tmk_core/protocol/arm_atsam/i2c_master.c b/tmk_core/protocol/arm_atsam/i2c_master.c
index ece9ee5db8..f608a79cc9 100644
--- a/tmk_core/protocol/arm_atsam/i2c_master.c
+++ b/tmk_core/protocol/arm_atsam/i2c_master.c
@@ -267,8 +267,8 @@ uint8_t I2C3733_Init_Control(void)
CLK_delay_ms(1);
- srdata.bit.IRST = 0;
- SPI_WriteSRData();
+ sr_exp_data.bit.IRST = 0;
+ SR_EXP_WriteData();
CLK_delay_ms(1);
@@ -357,8 +357,8 @@ void I2C3733_Control_Set(uint8_t state)
{
DBGC(DC_I2C3733_CONTROL_SET_BEGIN);
- srdata.bit.SDB_N = (state == 1 ? 1 : 0);
- SPI_WriteSRData();
+ sr_exp_data.bit.SDB_N = (state == 1 ? 1 : 0);
+ SR_EXP_WriteData();
DBGC(DC_I2C3733_CONTROL_SET_COMPLETE);
}
@@ -489,7 +489,7 @@ uint8_t i2c_led_q_request_room(uint8_t request_size)
if (i2c_led_q_full >= 100) //Give the queue a chance to clear up
{
- led_on;
+ DBG_LED_ON;
I2C_DMAC_LED_Init();
i2c_led_q_init();
return 1;
diff --git a/tmk_core/protocol/arm_atsam/led_matrix.c b/tmk_core/protocol/arm_atsam/led_matrix.c
index 729e042a6e..e914fc80ea 100644
--- a/tmk_core/protocol/arm_atsam/led_matrix.c
+++ b/tmk_core/protocol/arm_atsam/led_matrix.c
@@ -520,9 +520,9 @@ void led_matrix_task(void)
//Process more data if not finished
if (led_cur != lede)
{
- //m15_off; //debug profiling
+ //DBG_1_OFF; //debug profiling
led_matrix_run();
- //m15_on; //debug profiling
+ //DBG_1_ON; //debug profiling
}
}
diff --git a/tmk_core/protocol/arm_atsam/main_arm_atsam.c b/tmk_core/protocol/arm_atsam/main_arm_atsam.c
index 13034a05d1..2bda7d7c7b 100644
--- a/tmk_core/protocol/arm_atsam/main_arm_atsam.c
+++ b/tmk_core/protocol/arm_atsam/main_arm_atsam.c
@@ -247,8 +247,13 @@ void main_subtasks(void)
int main(void)
{
- led_ena;
- m15_ena;
+ DBG_LED_ENA;
+ DBG_1_ENA;
+ DBG_1_OFF;
+ DBG_2_ENA;
+ DBG_2_OFF;
+ DBG_3_ENA;
+ DBG_3_OFF;
debug_code_init();
@@ -256,7 +261,7 @@ int main(void)
ADC0_init();
- SPI_Init();
+ SR_EXP_Init();
i2c1_init();
@@ -274,8 +279,7 @@ int main(void)
while (USB2422_Port_Detect_Init() == 0) {}
- led_off;
- m15_off;
+ DBG_LED_OFF;
led_matrix_init();
diff --git a/tmk_core/protocol/arm_atsam/spi.c b/tmk_core/protocol/arm_atsam/spi.c
index 6036a92204..e275ba13f4 100644
--- a/tmk_core/protocol/arm_atsam/spi.c
+++ b/tmk_core/protocol/arm_atsam/spi.c
@@ -17,73 +17,70 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "arm_atsam_protocol.h"
-Srdata_t srdata;
+sr_exp_t sr_exp_data;
-void SPI_WriteSRData(void)
+void SR_EXP_WriteData(void)
{
- uint16_t timeout;
+ SR_EXP_RCLK_LO;
- SC2_RCLCK_LO;
+ while (!(SR_EXP_SERCOM->SPI.INTFLAG.bit.DRE)) { DBGC(DC_SPI_WRITE_DRE); }
- timeout = 50000;
- while (!(SCSPI->SPI.INTFLAG.bit.DRE) && --timeout) { DBGC(DC_SPI_WRITE_DRE); }
+ SR_EXP_SERCOM->SPI.DATA.bit.DATA = sr_exp_data.reg & 0xFF; //Shift in bits 7-0
+ while (!(SR_EXP_SERCOM->SPI.INTFLAG.bit.TXC)) { DBGC(DC_SPI_WRITE_TXC_1); }
- SCSPI->SPI.DATA.bit.DATA = srdata.reg & 0xFF; //Shift in bits 7-0
- timeout = 50000;
- while (!(SCSPI->SPI.INTFLAG.bit.TXC) && --timeout) { DBGC(DC_SPI_WRITE_TXC_1); }
+ SR_EXP_SERCOM->SPI.DATA.bit.DATA = (sr_exp_data.reg >> 8) & 0xFF; //Shift in bits 15-8
+ while (!(SR_EXP_SERCOM->SPI.INTFLAG.bit.TXC)) { DBGC(DC_SPI_WRITE_TXC_2); }
- SCSPI->SPI.DATA.bit.DATA = (srdata.reg >> 8) & 0xFF; //Shift in bits 15-8
- timeout = 50000;
- while (!(SCSPI->SPI.INTFLAG.bit.TXC) && --timeout) { DBGC(DC_SPI_WRITE_TXC_2); }
-
- SC2_RCLCK_HI;
+ SR_EXP_RCLK_HI;
}
-void SPI_Init(void)
+void SR_EXP_Init(void)
{
- uint32_t timeout;
-
DBGC(DC_SPI_INIT_BEGIN);
CLK_set_spi_freq(CHAN_SERCOM_SPI, FREQ_SPI_DEFAULT);
- PORT->Group[0].PMUX[6].bit.PMUXE = 2;
- PORT->Group[0].PMUX[6].bit.PMUXO = 2;
- PORT->Group[0].PINCFG[12].bit.PMUXEN = 1;
- PORT->Group[0].PINCFG[13].bit.PMUXEN = 1;
-
- //Configure Shift Registers
- SC2_DIRSET;
- SC2_RCLCK_HI;
- SC2_OE_DIS;
-
- SCSPI->SPI.CTRLA.bit.DORD = 1;
- SCSPI->SPI.CTRLA.bit.CPOL = 1;
- SCSPI->SPI.CTRLA.bit.CPHA = 1;
- SCSPI->SPI.CTRLA.bit.DIPO = 3;
- SCSPI->SPI.CTRLA.bit.MODE = 3; //master
-
- SCSPI->SPI.CTRLA.bit.ENABLE = 1;
- timeout = 50000;
- while (SCSPI->SPI.SYNCBUSY.bit.ENABLE && timeout--) { DBGC(DC_SPI_SYNC_ENABLING); }
-
- srdata.reg = 0;
- srdata.bit.HUB_CONNECT = 0;
- srdata.bit.HUB_RESET_N = 0;
- srdata.bit.S_UP = 0;
- srdata.bit.E_UP_N = 1;
- srdata.bit.S_DN1 = 1;
- srdata.bit.E_DN1_N = 1;
- srdata.bit.E_VBUS_1 = 0;
- srdata.bit.E_VBUS_2 = 0;
- srdata.bit.SRC_1 = 1;
- srdata.bit.SRC_2 = 1;
- srdata.bit.IRST = 1;
- srdata.bit.SDB_N = 0;
- SPI_WriteSRData();
-
- //Enable register output
- SC2_OE_ENA;
+ //Set up MCU Shift Register pins
+ PORT->Group[SR_EXP_RCLK_PORT].DIRSET.reg = (1 << SR_EXP_RCLK_PIN);
+ PORT->Group[SR_EXP_OE_N_PORT].DIRSET.reg = (1 << SR_EXP_OE_N_PIN);
+
+ //Set up MCU SPI pins
+ PORT->Group[SR_EXP_DATAOUT_PORT].PMUX[SR_EXP_DATAOUT_PIN / 2].bit.SR_EXP_DATAOUT_MUX_SEL = SR_EXP_DATAOUT_MUX; //MUX select for sercom
+ PORT->Group[SR_EXP_SCLK_PORT].PMUX[SR_EXP_SCLK_PIN / 2].bit.SR_EXP_SCLK_MUX_SEL = SR_EXP_SCLK_MUX; //MUX select for sercom
+ PORT->Group[SR_EXP_DATAOUT_PORT].PINCFG[SR_EXP_DATAOUT_PIN].bit.PMUXEN = 1; //MUX Enable
+ PORT->Group[SR_EXP_SCLK_PORT].PINCFG[SR_EXP_SCLK_PIN].bit.PMUXEN = 1; //MUX Enable
+
+ //Initialize Shift Register
+ SR_EXP_OE_N_DIS;
+ SR_EXP_RCLK_HI;
+
+ SR_EXP_SERCOM->SPI.CTRLA.bit.DORD = 1; //Data Order - LSB is transferred first
+ SR_EXP_SERCOM->SPI.CTRLA.bit.CPOL = 1; //Clock Polarity - SCK high when idle. Leading edge of cycle is falling. Trailing rising.
+ SR_EXP_SERCOM->SPI.CTRLA.bit.CPHA = 1; //Clock Phase - Leading Edge Falling, change, Trailing Edge - Rising, sample
+ SR_EXP_SERCOM->SPI.CTRLA.bit.DIPO = 3; //Data In Pinout - SERCOM PAD[3] is used as data input (Configure away from DOPO. Not using input.)
+ SR_EXP_SERCOM->SPI.CTRLA.bit.DOPO = 0; //Data Output PAD[0], Serial Clock PAD[1]
+ SR_EXP_SERCOM->SPI.CTRLA.bit.MODE = 3; //Operating Mode - Master operation
+
+ SR_EXP_SERCOM->SPI.CTRLA.bit.ENABLE = 1; //Enable - Peripheral is enabled or being enabled
+ while (SR_EXP_SERCOM->SPI.SYNCBUSY.bit.ENABLE) { DBGC(DC_SPI_SYNC_ENABLING); }
+
+ sr_exp_data.reg = 0;
+ sr_exp_data.bit.HUB_CONNECT = 0;
+ sr_exp_data.bit.HUB_RESET_N = 0;
+ sr_exp_data.bit.S_UP = 0;
+ sr_exp_data.bit.E_UP_N = 1;
+ sr_exp_data.bit.S_DN1 = 1;
+ sr_exp_data.bit.E_DN1_N = 1;
+ sr_exp_data.bit.E_VBUS_1 = 0;
+ sr_exp_data.bit.E_VBUS_2 = 0;
+ sr_exp_data.bit.SRC_1 = 1;
+ sr_exp_data.bit.SRC_2 = 1;
+ sr_exp_data.bit.IRST = 1;
+ sr_exp_data.bit.SDB_N = 0;
+ SR_EXP_WriteData();
+
+ //Enable Shift Register output
+ SR_EXP_OE_N_ENA;
DBGC(DC_SPI_INIT_COMPLETE);
}
diff --git a/tmk_core/protocol/arm_atsam/spi.h b/tmk_core/protocol/arm_atsam/spi.h
index 3412dfc364..4739b775db 100644
--- a/tmk_core/protocol/arm_atsam/spi.h
+++ b/tmk_core/protocol/arm_atsam/spi.h
@@ -18,21 +18,28 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#ifndef _SPI_H_
#define _SPI_H_
-//TODO: PS: Should bring ports to keyboard configuration
+/* Macros for Shift Register control */
+#define SR_EXP_RCLK_LO PORT->Group[SR_EXP_RCLK_PORT].OUTCLR.reg = (1 << SR_EXP_RCLK_PIN)
+#define SR_EXP_RCLK_HI PORT->Group[SR_EXP_RCLK_PORT].OUTSET.reg = (1 << SR_EXP_RCLK_PIN)
+#define SR_EXP_OE_N_ENA PORT->Group[SR_EXP_OE_N_PORT].OUTCLR.reg = (1 << SR_EXP_OE_N_PIN)
+#define SR_EXP_OE_N_DIS PORT->Group[SR_EXP_OE_N_PORT].OUTSET.reg = (1 << SR_EXP_OE_N_PIN)
-#define SCSPI SERCOM2
+/* Determine bits to set for mux selection */
+#if SR_EXP_DATAOUT_PIN % 2 == 0
+#define SR_EXP_DATAOUT_MUX_SEL PMUXE
+#else
+#define SR_EXP_DATAOUT_MUX_SEL PMUXO
+#endif
-#define P14_DIR 0x00004000 /* PIN14 DIR Bit */
-#define P14_OUT 0x00004000 /* PIN14 OUT Bit */
-#define P15_DIR 0x00008000 /* PIN15 DIR Bit */
-#define P15_OUT 0x00008000 /* PIN15 OUT Bit */
-
-#define SC2_RCLCK_LO REG_PORT_OUTCLR1 = P14_OUT /* PB14 Low, SC2_RCLCK Low */
-#define SC2_RCLCK_HI REG_PORT_OUTSET1 = P14_OUT /* PB14 High, SC2_RCLCK High */
-#define SC2_OE_ENA REG_PORT_OUTCLR1 = P15_OUT /* PB15 Low, SC2_OE_N Low (Shift register enabled) */
-#define SC2_OE_DIS REG_PORT_OUTSET1 = P15_OUT /* PB15 High, SC2_OE_N High (Shift register disabled) */
-#define SC2_DIRSET REG_PORT_DIRSET1 = P14_DIR | P15_DIR; /* PB14 PB15 OUT */
+/* Determine bits to set for mux selection */
+#if SR_EXP_SCLK_PIN % 2 == 0
+#define SR_EXP_SCLK_MUX_SEL PMUXE
+#else
+#define SR_EXP_SCLK_MUX_SEL PMUXO
+#endif
+/* Data structure to define Shift Register output expander hardware */
+/* This structure gets shifted into registers LSB first */
typedef union {
struct {
uint16_t RSVD4:1; /*!< bit: 0 */
@@ -53,11 +60,11 @@ typedef union {
uint16_t HUB_CONNECT:1; /*!< bit: 15 SIGNAL VBUS CONNECT TO USB HUB WHEN 1 */
} bit; /*!< Structure used for bit access */
uint16_t reg; /*!< Type used for register access */
-} Srdata_t;
+} sr_exp_t;
-extern Srdata_t srdata;
+extern sr_exp_t sr_exp_data;
-void SPI_WriteSRData(void);
-void SPI_Init(void);
+void SR_EXP_WriteData(void);
+void SR_EXP_Init(void);
#endif //_SPI_H_
diff --git a/tmk_core/protocol/arm_atsam/usb/usb2422.c b/tmk_core/protocol/arm_atsam/usb/usb2422.c
index 7c78e41d49..ac19bf4ea0 100644
--- a/tmk_core/protocol/arm_atsam/usb/usb2422.c
+++ b/tmk_core/protocol/arm_atsam/usb/usb2422.c
@@ -77,7 +77,6 @@ void USB2422_init(void)
Port *pport = PORT;
Oscctrl *posc = OSCCTRL;
Usb *pusb = USB;
- Srdata_t *pspi = &srdata;
DBGC(DC_USB2422_INIT_BEGIN);
@@ -132,9 +131,9 @@ void USB2422_init(void)
i2c0_init(); //IC2 clk must be high at USB2422 reset release time to signal SMB configuration
- pspi->bit.HUB_CONNECT = 1; //connect signal
- pspi->bit.HUB_RESET_N = 1; //reset high
- SPI_WriteSRData();
+ sr_exp_data.bit.HUB_CONNECT = 1; //connect signal
+ sr_exp_data.bit.HUB_RESET_N = 1; //reset high
+ SR_EXP_WriteData();
CLK_delay_us(100);
@@ -150,16 +149,14 @@ void USB2422_init(void)
void USB_reset(void)
{
- Srdata_t *pspi = &srdata;
-
DBGC(DC_USB_RESET_BEGIN);
//pulse reset for at least 1 usec
- pspi->bit.HUB_RESET_N = 0; //reset low
- SPI_WriteSRData();
+ sr_exp_data.bit.HUB_RESET_N = 0; //reset low
+ SR_EXP_WriteData();
CLK_delay_us(1);
- pspi->bit.HUB_RESET_N = 1; //reset high to run
- SPI_WriteSRData();
+ sr_exp_data.bit.HUB_RESET_N = 1; //reset high to run
+ SR_EXP_WriteData();
CLK_delay_us(1);
DBGC(DC_USB_RESET_COMPLETE);
@@ -241,14 +238,14 @@ void USB_set_host_by_voltage(void)
#ifndef MD_BOOTLOADER
usb_extra_state = USB_EXTRA_STATE_UNKNOWN;
#endif //MD_BOOTLOADER
- srdata.bit.SRC_1 = 1; //USBC-1 available for test
- srdata.bit.SRC_2 = 1; //USBC-2 available for test
- srdata.bit.E_UP_N = 1; //HOST disable
- srdata.bit.E_DN1_N = 1; //EXTRA disable
- srdata.bit.E_VBUS_1 = 0; //USBC-1 disable full power I/O
- srdata.bit.E_VBUS_2 = 0; //USBC-2 disable full power I/O
+ sr_exp_data.bit.SRC_1 = 1; //USBC-1 available for test
+ sr_exp_data.bit.SRC_2 = 1; //USBC-2 available for test
+ sr_exp_data.bit.E_UP_N = 1; //HOST disable
+ sr_exp_data.bit.E_DN1_N = 1; //EXTRA disable
+ sr_exp_data.bit.E_VBUS_1 = 0; //USBC-1 disable full power I/O
+ sr_exp_data.bit.E_VBUS_2 = 0; //USBC-2 disable full power I/O
- SPI_WriteSRData();
+ SR_EXP_WriteData();
CLK_delay_ms(250);
@@ -262,37 +259,37 @@ void USB_set_host_by_voltage(void)
if (v_con_1 > v_con_2)
{
- srdata.bit.S_UP = 0; //HOST to USBC-1
- srdata.bit.S_DN1 = 1; //EXTRA to USBC-2
- srdata.bit.SRC_1 = 1; //HOST on USBC-1
- srdata.bit.SRC_2 = 0; //EXTRA available on USBC-2
+ sr_exp_data.bit.S_UP = 0; //HOST to USBC-1
+ sr_exp_data.bit.S_DN1 = 1; //EXTRA to USBC-2
+ sr_exp_data.bit.SRC_1 = 1; //HOST on USBC-1
+ sr_exp_data.bit.SRC_2 = 0; //EXTRA available on USBC-2
- srdata.bit.E_VBUS_1 = 1; //USBC-1 enable full power I/O
- srdata.bit.E_VBUS_2 = 0; //USBC-2 disable full power I/O
+ sr_exp_data.bit.E_VBUS_1 = 1; //USBC-1 enable full power I/O
+ sr_exp_data.bit.E_VBUS_2 = 0; //USBC-2 disable full power I/O
- SPI_WriteSRData();
+ SR_EXP_WriteData();
- srdata.bit.E_UP_N = 0; //HOST enable
+ sr_exp_data.bit.E_UP_N = 0; //HOST enable
- SPI_WriteSRData();
+ SR_EXP_WriteData();
usb_host_port = USB_HOST_PORT_1;
}
else
{
- srdata.bit.S_UP = 1; //EXTRA to USBC-1
- srdata.bit.S_DN1 = 0; //HOST to USBC-2
- srdata.bit.SRC_1 = 0; //EXTRA available on USBC-1
- srdata.bit.SRC_2 = 1; //HOST on USBC-2
+ sr_exp_data.bit.S_UP = 1; //EXTRA to USBC-1
+ sr_exp_data.bit.S_DN1 = 0; //HOST to USBC-2
+ sr_exp_data.bit.SRC_1 = 0; //EXTRA available on USBC-1
+ sr_exp_data.bit.SRC_2 = 1; //HOST on USBC-2
- srdata.bit.E_VBUS_1 = 0; //USBC-1 disable full power I/O
- srdata.bit.E_VBUS_2 = 1; //USBC-2 enable full power I/O
+ sr_exp_data.bit.E_VBUS_1 = 0; //USBC-1 disable full power I/O
+ sr_exp_data.bit.E_VBUS_2 = 1; //USBC-2 enable full power I/O
- SPI_WriteSRData();
+ SR_EXP_WriteData();
- srdata.bit.E_UP_N = 0; //HOST enable
+ sr_exp_data.bit.E_UP_N = 0; //HOST enable
- SPI_WriteSRData();
+ SR_EXP_WriteData();
usb_host_port = USB_HOST_PORT_2;
}
@@ -325,15 +322,15 @@ uint8_t USB2422_Port_Detect_Init(void)
if (v_con_1 > v_con_2) //Values updated from USB_set_host_by_voltage();
{
//1 flash for port 1 detected
- if (tmod > 500 && tmod < 600) { led_on; }
- else { led_off; }
+ if (tmod > 500 && tmod < 600) { DBG_LED_ON; }
+ else { DBG_LED_OFF; }
}
else if (v_con_2 > v_con_1) //Values updated from USB_set_host_by_voltage();
{
//2 flash for port 2 detected
- if (tmod > 500 && tmod < 600) { led_on; }
- else if (tmod > 700 && tmod < 800) { led_on; }
- else { led_off; }
+ if (tmod > 500 && tmod < 600) { DBG_LED_ON; }
+ else if (tmod > 700 && tmod < 800) { DBG_LED_ON; }
+ else { DBG_LED_OFF; }
}
if (CLK_get_ms() > port_detect_retry_ms)
@@ -357,12 +354,12 @@ void USB_ExtraSetState(uint8_t state)
if (state == USB_EXTRA_STATE_DISABLED_UNTIL_REPLUG)
state = USB_EXTRA_STATE_DISABLED;
- if (usb_host_port == USB_HOST_PORT_1) srdata.bit.E_VBUS_2 = state;
- else if (usb_host_port == USB_HOST_PORT_2) srdata.bit.E_VBUS_1 = state;
+ if (usb_host_port == USB_HOST_PORT_1) sr_exp_data.bit.E_VBUS_2 = state;
+ else if (usb_host_port == USB_HOST_PORT_2) sr_exp_data.bit.E_VBUS_1 = state;
else return;
- srdata.bit.E_DN1_N = !state;
- SPI_WriteSRData();
+ sr_exp_data.bit.E_DN1_N = !state;
+ SR_EXP_WriteData();
usb_extra_state = state_save;