diff options
Diffstat (limited to 'tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/KnownIssues.txt')
| -rw-r--r-- | tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/KnownIssues.txt | 170 |
1 files changed, 0 insertions, 170 deletions
diff --git a/tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/KnownIssues.txt b/tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/KnownIssues.txt deleted file mode 100644 index 7018fec4d1..0000000000 --- a/tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/KnownIssues.txt +++ /dev/null @@ -1,170 +0,0 @@ -/** \file - * - * This file contains special DoxyGen information for the generation of the main page and other special - * documentation pages. It is not a project source file. - */ - - /** \page Page_KnownIssues Known Issues - * The following are known issues present in each official LUFA release. This list should contain all known - * issues in the library. Most of these issues should be corrected in the future release - see - * \ref Page_FutureChanges for a list of planned changes in future releases. - * - * \section Sec_KnownIssues140928 Version 140928 - * - AVR8 Architecture - * - No known issues. - * - UC3 Architecture - * \warning The UC3 device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. \n - * - * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release, - * although the architecture is supported in the LUFA core library. - * - DMA transfers to and from the USB controller are not yet implemented for this release. - * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their - * altered USB controller design. - * - The various \c *_CreateStream() functions for creating standard \c <stdio.h> compatible virtual file - * streams are not available on the UC3 architecture, due to a lack of suitable library support. - * - XMEGA Architecture - * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. - * - * - Endpoints of more than 64 bytes are not currently supported in this release. - * - Isochronous endpoints are not currently supported in this release. As a result, the audio class - * cannot be used on XMEGA devices. - * - Multiple-bank endpoints are not currently supported in this release. - * - Early silicon revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata - * relating to the USB controller. - * - Architecture Independent - * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used - * and a lengthy USB operation is initiated. - * - No LUFA provided driver INF files for Windows are signed, and thus may fail to install on systems where driver signing is enforced (e.g. Windows 8). - * - Build System - * - No known issues. - * - Atmel Studio Integration - * - Not all devices are listed in the "Supported Parts" screen when selecting a device. To select an alternative device, change the "Show Device" drop-down to "All Parts". - * - When switching boards after changing the device selection, a second conflicting \c BOARD symbol definition can be created that prevents successful compilation. To fix, open the project properties window (<i>Project->Project {name} Properties...</i> menu item), click the "Toolchain" tab, click "Symbols" under the "AVR/GNU C Compiler" section and remove the incorrect definition. - * - * \section Sec_KnownIssues140302 Version 140302 - * - AVR8 Architecture - * - No known issues. - * - UC3 Architecture - * \warning The UC3 device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. \n - * - * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release, - * although the architecture is supported in the LUFA core library. - * - DMA transfers to and from the USB controller are not yet implemented for this release. - * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their - * altered USB controller design. - * - The various \c *_CreateStream() functions for creating standard \c <stdio.h> compatible virtual file - * streams are not available on the UC3 architecture, due to a lack of suitable library support. - * - XMEGA Architecture - * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. - * - * - Endpoints of more than 64 bytes are not currently supported in this release. - * - Isochronous endpoints are not currently supported in this release. As a result, the audio class - * cannot be used on XMEGA devices. - * - Multiple-bank endpoints are not currently supported in this release. - * - Early silicon revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata - * relating to the USB controller. - * - Architecture Independent - * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used - * and a lengthy USB operation is initiated. - * - No LUFA provided driver INF files for Windows are signed, and thus may fail to install on systems where driver signing is enforced (e.g. Windows 8). - * - Build System - * - No known issues. - * - Atmel Studio Integration - * - Not all devices are listed in the "Supported Parts" screen when selecting a device. To select an alternative device, change the "Show Device" drop-down to "All Parts". - * - When switching boards after changing the device selection, a second conflicting BOARD symbol definition can be created that prevents successful compilation. To fix, open the project properties window (<i>Project->Project {name} Properties...</i> menu item), click the Toolchain tab, click "Symbols" under the "AVR/GNU C Compiler" section and remove the incorrect definition. - * - * \section Sec_KnownIssues130901 Version 130901 - * - AVR8 Architecture - * - No known issues. - * - UC3 Architecture - * \warning The UC3 device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. \n - * - * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release, - * although the architecture is supported in the LUFA core library. - * - DMA transfers to and from the USB controller are not yet implemented for this release. - * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their - * altered USB controller design. - * - The various \c *_CreateStream() functions for creating standard \c <stdio.h> compatible virtual file - * streams are not available on the UC3 architecture, due to a lack of suitable library support. - * - XMEGA Architecture - * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. - * - * - Endpoints of more than 64 bytes are not currently supported in this release. - * - Isochronous endpoints are not currently supported in this release. As a result, the audio class - * cannot be used on XMEGA devices. - * - Multiple-bank endpoints are not currently supported in this release. - * - Early silicon revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata - * relating to the USB controller. - * - Architecture Independent - * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used - * and a lengthy USB operation is initiated. - * - No LUFA provided driver INF files for Windows are signed, and thus may fail to install on systems where driver signing is enforced (e.g. Windows 8). - * - Build System - * - No known issues. - * - Atmel Studio Integration - * - Not all devices are listed in the "Supported Parts" screen when selecting a device. To select an alternative device, change the "Show Device" drop-down to "All Parts". - * - When switching boards after changing the device selection, a second conflicting BOARD symbol definition can be created that prevents successful compilation. To fix, open the project properties window (<i>Project->Project {name} Properties...</i> menu item), click the Toolchain tab, click "Symbols" under the "AVR/GNU C Compiler" section and remove the incorrect definition. - * - * \section Sec_KnownIssues130303 Version 130303 - * - AVR8 Architecture - * - No known issues. - * - UC3 Architecture - * \warning The UC3 device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. \n - * - * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release, - * although the architecture is supported in the LUFA core library. - * - DMA transfers to and from the USB controller are not yet implemented for this release. - * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their - * altered USB controller design. - * - The various \c CreateStream() functions for creating standard \c <stdio.h> compatible virtual file - * streams are not available on the UC3 architecture, due to a lack of suitable library support. - * - XMEGA Architecture - * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. - * - * - No demos, bootloaders or projects have been ported for the XMEGA devices in the current release, - * although the architecture is supported in the LUFA core library. - * - Endpoints of more than 64 bytes are not currently supported in this release. - * - Isochronous endpoints are not currently supported in this release. As a result, the audio class - * cannot be used on XMEGA devices. - * - Multiple-bank endpoints are not currently supported in this release. - * - Early revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata - * relating to the USB controller. - * - Architecture Independent - * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used - * and a lengthy USB operation is initiated. - * - No LUFA provided driver INF files for Windows are signed, and thus may fail to install on systems where driver signing is enforced (e.g. Windows 8). - * - Build System - * - No known issues. - * - * \section Sec_KnownIssues120730 Version 120730 - * - AVR8 Architecture - * - No known issues. - * - UC3 Architecture - * \warning The UC3 device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. \n - * - * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release, - * although the architecture is supported in the LUFA core library. - * - DMA transfers to and from the USB controller are not yet implemented for this release. - * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their - * altered USB controller design. - * - The various \c CreateStream() functions for creating standard \c <stdio.h> compatible virtual file - * streams are not available on the UC3 architecture, due to a lack of suitable library support. - * - XMEGA Architecture - * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. - * - * - No demos, bootloaders or projects have been ported for the XMEGA devices in the current release, - * although the architecture is supported in the LUFA core library. - * - Endpoints of more than 64 bytes are not currently supported in this release. - * - Isochronous endpoints are not currently supported in this release. As a result, the audio class - * cannot be used on XMEGA devices. - * - Multiple-bank endpoints are not currently supported in this release. - * - Early revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata - * relating to the USB controller. - * - Architecture Independent - * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used - * and a lengthy USB operation is initiated. - * - No LUFA provided driver INF files for Windows are signed, and thus may fail to install on systems where driver signing is enforced (e.g. Windows 8). - * - Build System - * - No known issues. - */ - |