diff options
Diffstat (limited to 'tmk_core/protocol/arm_atsam/led_matrix.h')
| -rw-r--r-- | tmk_core/protocol/arm_atsam/led_matrix.h | 146 |
1 files changed, 73 insertions, 73 deletions
diff --git a/tmk_core/protocol/arm_atsam/led_matrix.h b/tmk_core/protocol/arm_atsam/led_matrix.h index 1316efd9a4..8eaa5623bd 100644 --- a/tmk_core/protocol/arm_atsam/led_matrix.h +++ b/tmk_core/protocol/arm_atsam/led_matrix.h @@ -20,20 +20,20 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "quantum.h" -//From keyboard +// From keyboard #include "config_led.h" -//CS1-CS16 Current Source "Col" +// CS1-CS16 Current Source "Col" #define ISSI3733_CS_COUNT 16 -//SW1-SW12 Switch "Row" +// SW1-SW12 Switch "Row" #define ISSI3733_SW_COUNT 12 -#define ISSI3733_LED_RGB_COUNT ISSI3733_CS_COUNT * ISSI3733_SW_COUNT -#define ISSI3733_PG0_BYTES ISSI3733_LED_RGB_COUNT / 8 + 1 //+1 for first byte being memory start offset for I2C transfer -#define ISSI3733_PG1_BYTES ISSI3733_LED_RGB_COUNT + 1 //+1 for first byte being memory start offset for I2C transfer -#define ISSI3733_PG2_BYTES ISSI3733_LED_RGB_COUNT + 1 //+1 for first byte being memory start offset for I2C transfer -#define ISSI3733_PG3_BYTES 18 + 1 //+1 for first byte being memory start offset for I2C transfer +#define ISSI3733_LED_RGB_COUNT ISSI3733_CS_COUNT *ISSI3733_SW_COUNT +#define ISSI3733_PG0_BYTES ISSI3733_LED_RGB_COUNT / 8 + 1 //+1 for first byte being memory start offset for I2C transfer +#define ISSI3733_PG1_BYTES ISSI3733_LED_RGB_COUNT + 1 //+1 for first byte being memory start offset for I2C transfer +#define ISSI3733_PG2_BYTES ISSI3733_LED_RGB_COUNT + 1 //+1 for first byte being memory start offset for I2C transfer +#define ISSI3733_PG3_BYTES 18 + 1 //+1 for first byte being memory start offset for I2C transfer #define ISSI3733_PG_ONOFF_BYTES ISSI3733_PG0_BYTES #define ISSI3733_PG_OR_BYTES ISSI3733_PG0_BYTES @@ -43,38 +43,38 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define ISSI3733_PG_FN_BYTES ISSI3733_PG3_BYTES typedef struct issi3733_driver_s { - uint8_t addr; //Address of the driver according to wiring "ISSI3733: Table 1 Slave Address" - uint8_t onoff[ISSI3733_PG_ONOFF_BYTES]; //PG0 - LED Control Register - LED On/Off Register - uint8_t open[ISSI3733_PG_OR_BYTES]; //PG0 - LED Control Register - LED Open Register - uint8_t shrt[ISSI3733_PG_SR_BYTES]; //PG0 - LED Control Register - LED Short Register - uint8_t pwm[ISSI3733_PG_PWM_BYTES]; //PG1 - PWM Register - uint8_t abm[ISSI3733_PG_ABM_BYTES]; //PG2 - Auto Breath Mode Register - uint8_t conf[ISSI3733_PG_FN_BYTES]; //PG3 - Function Register + uint8_t addr; // Address of the driver according to wiring "ISSI3733: Table 1 Slave Address" + uint8_t onoff[ISSI3733_PG_ONOFF_BYTES]; // PG0 - LED Control Register - LED On/Off Register + uint8_t open[ISSI3733_PG_OR_BYTES]; // PG0 - LED Control Register - LED Open Register + uint8_t shrt[ISSI3733_PG_SR_BYTES]; // PG0 - LED Control Register - LED Short Register + uint8_t pwm[ISSI3733_PG_PWM_BYTES]; // PG1 - PWM Register + uint8_t abm[ISSI3733_PG_ABM_BYTES]; // PG2 - Auto Breath Mode Register + uint8_t conf[ISSI3733_PG_FN_BYTES]; // PG3 - Function Register } issi3733_driver_t; typedef struct issi3733_rgb_s { - uint8_t *r; //Direct access into PWM data - uint8_t *g; //Direct access into PWM data - uint8_t *b; //Direct access into PWM data + uint8_t *r; // Direct access into PWM data + uint8_t *g; // Direct access into PWM data + uint8_t *b; // Direct access into PWM data } issi3733_rgb_t; typedef struct issi3733_rgb_adr_s { - uint8_t drv; //Driver from given list - uint8_t cs; //CS - uint8_t swr; //SW Red - uint8_t swg; //SW Green - uint8_t swb; //SW Blue + uint8_t drv; // Driver from given list + uint8_t cs; // CS + uint8_t swr; // SW Red + uint8_t swg; // SW Green + uint8_t swb; // SW Blue } issi3733_rgb_adr_t; typedef struct issi3733_led_s { - uint8_t id; //According to PCB ref - issi3733_rgb_t rgb; //PWM settings of R G B - issi3733_rgb_adr_t adr; //Hardware addresses - float x; //Physical position X - float y; //Physical position Y - float px; //Physical position X in percent - float py; //Physical position Y in percent - uint8_t scan; //Key scan code from wiring (set 0xFF if no key) + uint8_t id; // According to PCB ref + issi3733_rgb_t rgb; // PWM settings of R G B + issi3733_rgb_adr_t adr; // Hardware addresses + float x; // Physical position X + float y; // Physical position Y + float px; // Physical position X in percent + float py; // Physical position Y in percent + uint8_t scan; // Key scan code from wiring (set 0xFF if no key) } issi3733_led_t; extern issi3733_driver_t issidrv[ISSI3733_DRIVER_COUNT]; @@ -92,67 +92,67 @@ void led_matrix_indicators(void); #ifdef USE_MASSDROP_CONFIGURATOR -#define EF_NONE 0x00000000 //No effect -#define EF_OVER 0x00000001 //Overwrite any previous color information with new -#define EF_SCR_L 0x00000002 //Scroll left -#define EF_SCR_R 0x00000004 //Scroll right -#define EF_SUBTRACT 0x00000008 //Subtract color values +# define EF_NONE 0x00000000 // No effect +# define EF_OVER 0x00000001 // Overwrite any previous color information with new +# define EF_SCR_L 0x00000002 // Scroll left +# define EF_SCR_R 0x00000004 // Scroll right +# define EF_SUBTRACT 0x00000008 // Subtract color values typedef struct led_setup_s { - float hs; //Band begin at percent - float he; //Band end at percent - uint8_t rs; //Red start value - uint8_t re; //Red end value - uint8_t gs; //Green start value - uint8_t ge; //Green end value - uint8_t bs; //Blue start value - uint8_t be; //Blue end value - uint32_t ef; //Animation and color effects - uint8_t end; //Set to signal end of the setup + float hs; // Band begin at percent + float he; // Band end at percent + uint8_t rs; // Red start value + uint8_t re; // Red end value + uint8_t gs; // Green start value + uint8_t ge; // Green end value + uint8_t bs; // Blue start value + uint8_t be; // Blue end value + uint32_t ef; // Animation and color effects + uint8_t end; // Set to signal end of the setup } led_setup_t; extern const uint8_t led_setups_count; -extern void *led_setups[]; +extern void * led_setups[]; -//LED Extra Instructions -#define LED_FLAG_NULL 0x00 //Matching and coloring not used (default) -#define LED_FLAG_MATCH_ID 0x01 //Match on the ID of the LED (set id#'s to desired bit pattern, first LED is id 1) -#define LED_FLAG_MATCH_LAYER 0x02 //Match on the current active layer (set layer to desired match layer) -#define LED_FLAG_USE_RGB 0x10 //Use a specific RGB value (set r, g, b to desired output color values) -#define LED_FLAG_USE_PATTERN 0x20 //Use a specific pattern ID (set pattern_id to desired output pattern) -#define LED_FLAG_USE_ROTATE_PATTERN 0x40 //Use pattern the user has cycled to manually +// LED Extra Instructions +# define LED_FLAG_NULL 0x00 // Matching and coloring not used (default) +# define LED_FLAG_MATCH_ID 0x01 // Match on the ID of the LED (set id#'s to desired bit pattern, first LED is id 1) +# define LED_FLAG_MATCH_LAYER 0x02 // Match on the current active layer (set layer to desired match layer) +# define LED_FLAG_USE_RGB 0x10 // Use a specific RGB value (set r, g, b to desired output color values) +# define LED_FLAG_USE_PATTERN 0x20 // Use a specific pattern ID (set pattern_id to desired output pattern) +# define LED_FLAG_USE_ROTATE_PATTERN 0x40 // Use pattern the user has cycled to manually typedef struct led_instruction_s { - uint16_t flags; // Bitfield for LED instructions - uint32_t id0; // Bitwise id, IDs 0-31 - uint32_t id1; // Bitwise id, IDs 32-63 - uint32_t id2; // Bitwise id, IDs 64-95 - uint32_t id3; // Bitwise id, IDs 96-127 - uint8_t layer; - uint8_t r; - uint8_t g; - uint8_t b; - uint8_t pattern_id; - uint8_t end; + uint16_t flags; // Bitfield for LED instructions + uint32_t id0; // Bitwise id, IDs 0-31 + uint32_t id1; // Bitwise id, IDs 32-63 + uint32_t id2; // Bitwise id, IDs 64-95 + uint32_t id3; // Bitwise id, IDs 96-127 + uint8_t layer; + uint8_t r; + uint8_t g; + uint8_t b; + uint8_t pattern_id; + uint8_t end; } led_instruction_t; extern led_instruction_t led_instructions[]; extern uint8_t led_animation_breathing; extern uint8_t led_animation_id; -extern float led_animation_speed; +extern float led_animation_speed; extern uint8_t led_lighting_mode; extern uint8_t led_enabled; extern uint8_t led_animation_breathe_cur; extern uint8_t led_animation_direction; extern uint8_t breathe_dir; -#define LED_MODE_NORMAL 0 //Must be 0 -#define LED_MODE_KEYS_ONLY 1 -#define LED_MODE_NON_KEYS_ONLY 2 -#define LED_MODE_INDICATORS_ONLY 3 -#define LED_MODE_MAX_INDEX LED_MODE_INDICATORS_ONLY //Must be highest value +# define LED_MODE_NORMAL 0 // Must be 0 +# define LED_MODE_KEYS_ONLY 1 +# define LED_MODE_NON_KEYS_ONLY 2 +# define LED_MODE_INDICATORS_ONLY 3 +# define LED_MODE_MAX_INDEX LED_MODE_INDICATORS_ONLY // Must be highest value -#endif // USE_MASSDROP_CONFIGURATOR +#endif // USE_MASSDROP_CONFIGURATOR -#endif //_LED_MATRIX_H_ +#endif //_LED_MATRIX_H_ |