summaryrefslogtreecommitdiff
path: root/protocol/usb_hid/arduino-1.0.1/cores/arduino/WInterrupts.c
diff options
context:
space:
mode:
Diffstat (limited to 'protocol/usb_hid/arduino-1.0.1/cores/arduino/WInterrupts.c')
-rw-r--r--protocol/usb_hid/arduino-1.0.1/cores/arduino/WInterrupts.c298
1 files changed, 298 insertions, 0 deletions
diff --git a/protocol/usb_hid/arduino-1.0.1/cores/arduino/WInterrupts.c b/protocol/usb_hid/arduino-1.0.1/cores/arduino/WInterrupts.c
new file mode 100644
index 0000000000..8f3ec847f1
--- /dev/null
+++ b/protocol/usb_hid/arduino-1.0.1/cores/arduino/WInterrupts.c
@@ -0,0 +1,298 @@
+/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */
+
+/*
+ Part of the Wiring project - http://wiring.uniandes.edu.co
+
+ Copyright (c) 2004-05 Hernando Barragan
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General
+ Public License along with this library; if not, write to the
+ Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+ Boston, MA 02111-1307 USA
+
+ Modified 24 November 2006 by David A. Mellis
+ Modified 1 August 2010 by Mark Sproul
+*/
+
+#include <inttypes.h>
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <avr/pgmspace.h>
+#include <stdio.h>
+
+#include "wiring_private.h"
+
+static volatile voidFuncPtr intFunc[EXTERNAL_NUM_INTERRUPTS];
+// volatile static voidFuncPtr twiIntFunc;
+
+void attachInterrupt(uint8_t interruptNum, void (*userFunc)(void), int mode) {
+ if(interruptNum < EXTERNAL_NUM_INTERRUPTS) {
+ intFunc[interruptNum] = userFunc;
+
+ // Configure the interrupt mode (trigger on low input, any change, rising
+ // edge, or falling edge). The mode constants were chosen to correspond
+ // to the configuration bits in the hardware register, so we simply shift
+ // the mode into place.
+
+ // Enable the interrupt.
+
+ switch (interruptNum) {
+#if defined(__AVR_ATmega32U4__)
+ // I hate doing this, but the register assignment differs between the 1280/2560
+ // and the 32U4. Since avrlib defines registers PCMSK1 and PCMSK2 that aren't
+ // even present on the 32U4 this is the only way to distinguish between them.
+ case 0:
+ EICRA = (EICRA & ~((1<<ISC00) | (1<<ISC01))) | (mode << ISC00);
+ EIMSK |= (1<<INT0);
+ break;
+ case 1:
+ EICRA = (EICRA & ~((1<<ISC10) | (1<<ISC11))) | (mode << ISC10);
+ EIMSK |= (1<<INT1);
+ break;
+#elif defined(EICRA) && defined(EICRB) && defined(EIMSK)
+ case 2:
+ EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
+ EIMSK |= (1 << INT0);
+ break;
+ case 3:
+ EICRA = (EICRA & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
+ EIMSK |= (1 << INT1);
+ break;
+ case 4:
+ EICRA = (EICRA & ~((1 << ISC20) | (1 << ISC21))) | (mode << ISC20);
+ EIMSK |= (1 << INT2);
+ break;
+ case 5:
+ EICRA = (EICRA & ~((1 << ISC30) | (1 << ISC31))) | (mode << ISC30);
+ EIMSK |= (1 << INT3);
+ break;
+ case 0:
+ EICRB = (EICRB & ~((1 << ISC40) | (1 << ISC41))) | (mode << ISC40);
+ EIMSK |= (1 << INT4);
+ break;
+ case 1:
+ EICRB = (EICRB & ~((1 << ISC50) | (1 << ISC51))) | (mode << ISC50);
+ EIMSK |= (1 << INT5);
+ break;
+ case 6:
+ EICRB = (EICRB & ~((1 << ISC60) | (1 << ISC61))) | (mode << ISC60);
+ EIMSK |= (1 << INT6);
+ break;
+ case 7:
+ EICRB = (EICRB & ~((1 << ISC70) | (1 << ISC71))) | (mode << ISC70);
+ EIMSK |= (1 << INT7);
+ break;
+#else
+ case 0:
+ #if defined(EICRA) && defined(ISC00) && defined(EIMSK)
+ EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
+ EIMSK |= (1 << INT0);
+ #elif defined(MCUCR) && defined(ISC00) && defined(GICR)
+ MCUCR = (MCUCR & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
+ GICR |= (1 << INT0);
+ #elif defined(MCUCR) && defined(ISC00) && defined(GIMSK)
+ MCUCR = (MCUCR & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
+ GIMSK |= (1 << INT0);
+ #else
+ #error attachInterrupt not finished for this CPU (case 0)
+ #endif
+ break;
+
+ case 1:
+ #if defined(EICRA) && defined(ISC10) && defined(ISC11) && defined(EIMSK)
+ EICRA = (EICRA & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
+ EIMSK |= (1 << INT1);
+ #elif defined(MCUCR) && defined(ISC10) && defined(ISC11) && defined(GICR)
+ MCUCR = (MCUCR & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
+ GICR |= (1 << INT1);
+ #elif defined(MCUCR) && defined(ISC10) && defined(GIMSK) && defined(GIMSK)
+ MCUCR = (MCUCR & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
+ GIMSK |= (1 << INT1);
+ #else
+ #warning attachInterrupt may need some more work for this cpu (case 1)
+ #endif
+ break;
+
+ case 2:
+ #if defined(EICRA) && defined(ISC20) && defined(ISC21) && defined(EIMSK)
+ EICRA = (EICRA & ~((1 << ISC20) | (1 << ISC21))) | (mode << ISC20);
+ EIMSK |= (1 << INT2);
+ #elif defined(MCUCR) && defined(ISC20) && defined(ISC21) && defined(GICR)
+ MCUCR = (MCUCR & ~((1 << ISC20) | (1 << ISC21))) | (mode << ISC20);
+ GICR |= (1 << INT2);
+ #elif defined(MCUCR) && defined(ISC20) && defined(GIMSK) && defined(GIMSK)
+ MCUCR = (MCUCR & ~((1 << ISC20) | (1 << ISC21))) | (mode << ISC20);
+ GIMSK |= (1 << INT2);
+ #endif
+ break;
+#endif
+ }
+ }
+}
+
+void detachInterrupt(uint8_t interruptNum) {
+ if(interruptNum < EXTERNAL_NUM_INTERRUPTS) {
+ // Disable the interrupt. (We can't assume that interruptNum is equal
+ // to the number of the EIMSK bit to clear, as this isn't true on the
+ // ATmega8. There, INT0 is 6 and INT1 is 7.)
+ switch (interruptNum) {
+#if defined(__AVR_ATmega32U4__)
+ case 0:
+ EIMSK &= ~(1<<INT0);
+ break;
+ case 1:
+ EIMSK &= ~(1<<INT1);
+ break;
+#elif defined(EICRA) && defined(EICRB) && defined(EIMSK)
+ case 2:
+ EIMSK &= ~(1 << INT0);
+ break;
+ case 3:
+ EIMSK &= ~(1 << INT1);
+ break;
+ case 4:
+ EIMSK &= ~(1 << INT2);
+ break;
+ case 5:
+ EIMSK &= ~(1 << INT3);
+ break;
+ case 0:
+ EIMSK &= ~(1 << INT4);
+ break;
+ case 1:
+ EIMSK &= ~(1 << INT5);
+ break;
+ case 6:
+ EIMSK &= ~(1 << INT6);
+ break;
+ case 7:
+ EIMSK &= ~(1 << INT7);
+ break;
+#else
+ case 0:
+ #if defined(EIMSK) && defined(INT0)
+ EIMSK &= ~(1 << INT0);
+ #elif defined(GICR) && defined(ISC00)
+ GICR &= ~(1 << INT0); // atmega32
+ #elif defined(GIMSK) && defined(INT0)
+ GIMSK &= ~(1 << INT0);
+ #else
+ #error detachInterrupt not finished for this cpu
+ #endif
+ break;
+
+ case 1:
+ #if defined(EIMSK) && defined(INT1)
+ EIMSK &= ~(1 << INT1);
+ #elif defined(GICR) && defined(INT1)
+ GICR &= ~(1 << INT1); // atmega32
+ #elif defined(GIMSK) && defined(INT1)
+ GIMSK &= ~(1 << INT1);
+ #else
+ #warning detachInterrupt may need some more work for this cpu (case 1)
+ #endif
+ break;
+#endif
+ }
+
+ intFunc[interruptNum] = 0;
+ }
+}
+
+/*
+void attachInterruptTwi(void (*userFunc)(void) ) {
+ twiIntFunc = userFunc;
+}
+*/
+
+#if defined(__AVR_ATmega32U4__)
+SIGNAL(INT0_vect) {
+ if(intFunc[EXTERNAL_INT_0])
+ intFunc[EXTERNAL_INT_0]();
+}
+
+SIGNAL(INT1_vect) {
+ if(intFunc[EXTERNAL_INT_1])
+ intFunc[EXTERNAL_INT_1]();
+}
+
+#elif defined(EICRA) && defined(EICRB)
+
+SIGNAL(INT0_vect) {
+ if(intFunc[EXTERNAL_INT_2])
+ intFunc[EXTERNAL_INT_2]();
+}
+
+SIGNAL(INT1_vect) {
+ if(intFunc[EXTERNAL_INT_3])
+ intFunc[EXTERNAL_INT_3]();
+}
+
+SIGNAL(INT2_vect) {
+ if(intFunc[EXTERNAL_INT_4])
+ intFunc[EXTERNAL_INT_4]();
+}
+
+SIGNAL(INT3_vect) {
+ if(intFunc[EXTERNAL_INT_5])
+ intFunc[EXTERNAL_INT_5]();
+}
+
+SIGNAL(INT4_vect) {
+ if(intFunc[EXTERNAL_INT_0])
+ intFunc[EXTERNAL_INT_0]();
+}
+
+SIGNAL(INT5_vect) {
+ if(intFunc[EXTERNAL_INT_1])
+ intFunc[EXTERNAL_INT_1]();
+}
+
+SIGNAL(INT6_vect) {
+ if(intFunc[EXTERNAL_INT_6])
+ intFunc[EXTERNAL_INT_6]();
+}
+
+SIGNAL(INT7_vect) {
+ if(intFunc[EXTERNAL_INT_7])
+ intFunc[EXTERNAL_INT_7]();
+}
+
+#else
+
+SIGNAL(INT0_vect) {
+ if(intFunc[EXTERNAL_INT_0])
+ intFunc[EXTERNAL_INT_0]();
+}
+
+SIGNAL(INT1_vect) {
+ if(intFunc[EXTERNAL_INT_1])
+ intFunc[EXTERNAL_INT_1]();
+}
+
+#if defined(EICRA) && defined(ISC20)
+SIGNAL(INT2_vect) {
+ if(intFunc[EXTERNAL_INT_2])
+ intFunc[EXTERNAL_INT_2]();
+}
+#endif
+
+#endif
+
+/*
+SIGNAL(SIG_2WIRE_SERIAL) {
+ if(twiIntFunc)
+ twiIntFunc();
+}
+*/
+