diff options
Diffstat (limited to 'lib/lufa/Projects/Webserver/Lib/uip/uipopt.h')
| -rw-r--r-- | lib/lufa/Projects/Webserver/Lib/uip/uipopt.h | 740 |
1 files changed, 0 insertions, 740 deletions
diff --git a/lib/lufa/Projects/Webserver/Lib/uip/uipopt.h b/lib/lufa/Projects/Webserver/Lib/uip/uipopt.h deleted file mode 100644 index 520c03f25e..0000000000 --- a/lib/lufa/Projects/Webserver/Lib/uip/uipopt.h +++ /dev/null @@ -1,740 +0,0 @@ -/** - * \addtogroup uip - * @{ - */ - -/** - * \defgroup uipopt Configuration options for uIP - * @{ - * - * uIP is configured using the per-project configuration file - * "uipopt.h". This file contains all compile-time options for uIP and - * should be tweaked to match each specific project. The uIP - * distribution contains a documented example "uipopt.h" that can be - * copied and modified for each project. - */ - -/** - * \file - * Configuration options for uIP. - * \author Adam Dunkels <adam@dunkels.com> - * - * This file is used for tweaking various configuration options for - * uIP. You should make a copy of this file into one of your project's - * directories instead of editing this example "uipopt.h" file that - * comes with the uIP distribution. - */ - -/* - * Copyright (c) 2001-2003, Adam Dunkels. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote - * products derived from this software without specific prior - * written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS - * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE - * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * This file is part of the uIP TCP/IP stack. - * - * $Id: uipopt.h,v 1.11 2009/04/10 00:37:48 adamdunkels Exp $ - * - */ - -#ifndef __UIPOPT_H__ -#define __UIPOPT_H__ - -#include "Config/AppConfig.h" - -#ifndef UIP_LITTLE_ENDIAN -#define UIP_LITTLE_ENDIAN 3412 -#endif /* UIP_LITTLE_ENDIAN */ -#ifndef UIP_BIG_ENDIAN -#define UIP_BIG_ENDIAN 1234 -#endif /* UIP_BIG_ENDIAN */ - -/*------------------------------------------------------------------------------*/ - -/** - * \defgroup uipoptstaticconf Static configuration options - * @{ - * - * These configuration options can be used for setting the IP address - * settings statically, but only if UIP_FIXEDADDR is set to 1. The - * configuration options for a specific node includes IP address, - * netmask and default router as well as the Ethernet address. The - * netmask, default router and Ethernet address are applicable only - * if uIP should be run over Ethernet. - * - * This options are meaningful only for the IPv4 code. - * - * All of these should be changed to suit your project. - */ - -/** - * Determines if uIP should use a fixed IP address or not. - * - * If uIP should use a fixed IP address, the settings are set in the - * uipopt.h file. If not, the macros uip_sethostaddr(), - * uip_setdraddr() and uip_setnetmask() should be used instead. - * - * \hideinitializer - */ -#define UIP_FIXEDADDR 0 - -/** - * Ping IP address assignment. - * - * uIP uses a "ping" packets for setting its own IP address if this - * option is set. If so, uIP will start with an empty IP address and - * the destination IP address of the first incoming "ping" (ICMP echo) - * packet will be used for setting the hosts IP address. - * - * \note This works only if UIP_FIXEDADDR is 0. - * - * \hideinitializer - */ -#ifdef UIP_CONF_PINGADDRCONF -#define UIP_PINGADDRCONF UIP_CONF_PINGADDRCONF -#else /* UIP_CONF_PINGADDRCONF */ -#define UIP_PINGADDRCONF 0 -#endif /* UIP_CONF_PINGADDRCONF */ - - -/** - * Specifies if the uIP ARP module should be compiled with a fixed - * Ethernet MAC address or not. - * - * If this configuration option is 0, the macro uip_setethaddr() can - * be used to specify the Ethernet address at run-time. - * - * \hideinitializer - */ -#define UIP_FIXEDETHADDR 0 - -/** @} */ -/*------------------------------------------------------------------------------*/ -/** - * \defgroup uipoptip IP configuration options - * @{ - * - */ -/** - * The IP TTL (time to live) of IP packets sent by uIP. - * - * This should normally not be changed. - */ -#define UIP_TTL 64 - -/** - * The maximum time an IP fragment should wait in the reassembly - * buffer before it is dropped. - * - */ -#define UIP_REASS_MAXAGE 60 /*60s*/ - -/** - * Turn on support for IP packet reassembly. - * - * uIP supports reassembly of fragmented IP packets. This features - * requires an additional amount of RAM to hold the reassembly buffer - * and the reassembly code size is approximately 700 bytes. The - * reassembly buffer is of the same size as the uip_buf buffer - * (configured by UIP_BUFSIZE). - * - * \note IP packet reassembly is not heavily tested. - * - * \hideinitializer - */ -#ifdef UIP_CONF_REASSEMBLY -#define UIP_REASSEMBLY UIP_CONF_REASSEMBLY -#else /* UIP_CONF_REASSEMBLY */ -#define UIP_REASSEMBLY 0 -#endif /* UIP_CONF_REASSEMBLY */ -/** @} */ - -/*------------------------------------------------------------------------------*/ -/** - * \defgroup uipoptipv6 IPv6 configuration options - * @{ - * - */ - -/** The maximum transmission unit at the IP Layer*/ -#define UIP_LINK_MTU 1280 - -#ifndef UIP_CONF_IPV6 -/** Do we use IPv6 or not (default: no) */ -#define UIP_CONF_IPV6 0 -#endif - -#ifndef UIP_CONF_IPV6_QUEUE_PKT -/** Do we do per %neighbor queuing during address resolution (default: no) */ -#define UIP_CONF_IPV6_QUEUE_PKT 0 -#endif - -#ifndef UIP_CONF_IPV6_CHECKS -/** Do we do IPv6 consistency checks (highly recommended, default: yes) */ -#define UIP_CONF_IPV6_CHECKS 1 -#endif - -#ifndef UIP_CONF_IPV6_REASSEMBLY -/** Do we do IPv6 fragmentation (default: no) */ -#define UIP_CONF_IPV6_REASSEMBLY 0 -#endif - -#ifndef UIP_CONF_NETIF_MAX_ADDRESSES -/** Default number of IPv6 addresses associated to the node's interface */ -#define UIP_CONF_NETIF_MAX_ADDRESSES 3 -#endif - -#ifndef UIP_CONF_ND6_MAX_PREFIXES -/** Default number of IPv6 prefixes associated to the node's interface */ -#define UIP_CONF_ND6_MAX_PREFIXES 3 -#endif - -#ifndef UIP_CONF_ND6_MAX_NEIGHBORS -/** Default number of neighbors that can be stored in the %neighbor cache */ -#define UIP_CONF_ND6_MAX_NEIGHBORS 4 -#endif - -#ifndef UIP_CONF_ND6_MAX_DEFROUTERS -/** Minimum number of default routers */ -#define UIP_CONF_ND6_MAX_DEFROUTERS 2 -#endif -/** @} */ - -/*------------------------------------------------------------------------------*/ -/** - * \defgroup uipoptudp UDP configuration options - * @{ - * - * \note The UDP support in uIP is still not entirely complete; there - * is no support for sending or receiving broadcast or multicast - * packets, but it works well enough to support a number of vital - * applications such as DNS queries, though - */ - -/** - * Toggles whether UDP support should be compiled in or not. - * - * \hideinitializer - */ -#ifdef UIP_CONF_UDP -#define UIP_UDP UIP_CONF_UDP -#else /* UIP_CONF_UDP */ -#define UIP_UDP 1 -#endif /* UIP_CONF_UDP */ - -/** - * Toggles if UDP checksums should be used or not. - * - * \note Support for UDP checksums is currently not included in uIP, - * so this option has no function. - * - * \hideinitializer - */ -#ifdef UIP_CONF_UDP_CHECKSUMS -#define UIP_UDP_CHECKSUMS UIP_CONF_UDP_CHECKSUMS -#else -#define UIP_UDP_CHECKSUMS 0 -#endif - -/** - * The maximum amount of concurrent UDP connections. - * - * \hideinitializer - */ -#ifdef UIP_CONF_UDP_CONNS -#define UIP_UDP_CONNS UIP_CONF_UDP_CONNS -#else /* UIP_CONF_UDP_CONNS */ -#define UIP_UDP_CONNS 10 -#endif /* UIP_CONF_UDP_CONNS */ - -/** - * The name of the function that should be called when UDP datagrams arrive. - * - * \hideinitializer - */ - - -/** @} */ -/*------------------------------------------------------------------------------*/ -/** - * \defgroup uipopttcp TCP configuration options - * @{ - */ - -/** - * Toggles whether TCP support should be compiled in or not. - * - * \hideinitializer - */ -#ifdef UIP_CONF_TCP -#define UIP_TCP UIP_CONF_TCP -#else /* UIP_CONF_TCP */ -#define UIP_TCP 1 -#endif /* UIP_CONF_TCP */ - -/** - * Determines if support for opening connections from uIP should be - * compiled in. - * - * If the applications that are running on top of uIP for this project - * do not need to open outgoing TCP connections, this configuration - * option can be turned off to reduce the code size of uIP. - * - * \hideinitializer - */ -#ifndef UIP_CONF_ACTIVE_OPEN -#define UIP_ACTIVE_OPEN 1 -#else /* UIP_CONF_ACTIVE_OPEN */ -#define UIP_ACTIVE_OPEN UIP_CONF_ACTIVE_OPEN -#endif /* UIP_CONF_ACTIVE_OPEN */ - -/** - * The maximum number of simultaneously open TCP connections. - * - * Since the TCP connections are statically allocated, turning this - * configuration knob down results in less RAM used. Each TCP - * connection requires approximately 30 bytes of memory. - * - * \hideinitializer - */ -#ifndef UIP_CONF_MAX_CONNECTIONS -#define UIP_CONNS 10 -#else /* UIP_CONF_MAX_CONNECTIONS */ -#define UIP_CONNS UIP_CONF_MAX_CONNECTIONS -#endif /* UIP_CONF_MAX_CONNECTIONS */ - - -/** - * The maximum number of simultaneously listening TCP ports. - * - * Each listening TCP port requires 2 bytes of memory. - * - * \hideinitializer - */ -#ifndef UIP_CONF_MAX_LISTENPORTS -#define UIP_LISTENPORTS 20 -#else /* UIP_CONF_MAX_LISTENPORTS */ -#define UIP_LISTENPORTS UIP_CONF_MAX_LISTENPORTS -#endif /* UIP_CONF_MAX_LISTENPORTS */ - -/** - * Determines if support for TCP urgent data notification should be - * compiled in. - * - * Urgent data (out-of-band data) is a rarely used TCP feature that - * very seldom would be required. - * - * \hideinitializer - */ -#if !defined(UIP_URGDATA) -#define UIP_URGDATA 0 -#endif - -/** - * The initial retransmission timeout counted in timer pulses. - * - * This should not be changed. - */ -#if !defined(UIP_RTO) -#define UIP_RTO 3 -#endif - -/** - * The maximum number of times a segment should be retransmitted - * before the connection should be aborted. - * - * This should not be changed. - */ -#if !defined(UIP_MAXRTX) -#define UIP_MAXRTX 8 -#endif - -/** - * The maximum number of times a SYN segment should be retransmitted - * before a connection request should be deemed to have been - * unsuccessful. - * - * This should not need to be changed. - */ -#if !defined(UIP_MAXSYNRTX) -#define UIP_MAXSYNRTX 5 -#endif - -/** - * The TCP maximum segment size. - * - * This is should not be to set to more than - * UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN. - */ -#ifdef UIP_CONF_TCP_MSS -#define UIP_TCP_MSS UIP_CONF_TCP_MSS -#else -#define UIP_TCP_MSS (UIP_BUFSIZE - UIP_LLH_LEN - UIP_TCPIP_HLEN) -#endif - -/** - * The size of the advertised receiver's window. - * - * Should be set low (i.e., to the size of the uip_buf buffer) if the - * application is slow to process incoming data, or high (32768 bytes) - * if the application processes data quickly. - * - * \hideinitializer - */ -#ifndef UIP_CONF_RECEIVE_WINDOW -#define UIP_RECEIVE_WINDOW UIP_TCP_MSS -#else -#define UIP_RECEIVE_WINDOW UIP_CONF_RECEIVE_WINDOW -#endif - -/** - * How long a connection should stay in the TIME_WAIT state. - * - * This configuration option has no real implication, and it should be - * left untouched. - */ -#define UIP_TIME_WAIT_TIMEOUT 120 - - -/** @} */ -/*------------------------------------------------------------------------------*/ -/** - * \defgroup uipoptarp ARP configuration options - * @{ - */ - -/** - * The size of the ARP table. - * - * This option should be set to a larger value if this uIP node will - * have many connections from the local network. - * - * \hideinitializer - */ -#ifdef UIP_CONF_ARPTAB_SIZE -#define UIP_ARPTAB_SIZE UIP_CONF_ARPTAB_SIZE -#else -#define UIP_ARPTAB_SIZE 8 -#endif - -/** - * The maximum age of ARP table entries measured in 10ths of seconds. - * - * An UIP_ARP_MAXAGE of 120 corresponds to 20 minutes (BSD - * default). - */ -#define UIP_ARP_MAXAGE 120 - - -/** @} */ - -/*------------------------------------------------------------------------------*/ - -/** - * \defgroup uipoptmac layer 2 options (for ipv6) - * @{ - */ - -#define UIP_DEFAULT_PREFIX_LEN 64 - -/** @} */ - -/*------------------------------------------------------------------------------*/ - -/** - * \defgroup uipoptsics 6lowpan options (for ipv6) - * @{ - */ -/** - * Timeout for packet reassembly at the 6lowpan layer - * (should be < 60s) - */ -#ifdef SICSLOWPAN_CONF_MAXAGE -#define SICSLOWPAN_REASS_MAXAGE SICSLOWPAN_CONF_MAXAGE -#else -#define SICSLOWPAN_REASS_MAXAGE 20 -#endif - -/** - * Do we compress the IP header or not (default: no) - */ -#ifndef SICSLOWPAN_CONF_COMPRESSION -#define SICSLOWPAN_CONF_COMPRESSION 0 -#endif - -/** - * If we use IPHC compression, how many address contexts do we support - */ -#ifndef SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS -#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 1 -#endif - -/** - * Do we support 6lowpan fragmentation - */ -#ifndef SICSLOWPAN_CONF_FRAG -#define SICSLOWPAN_CONF_FRAG 0 -#endif - -/** @} */ - -/*------------------------------------------------------------------------------*/ - -/** - * \defgroup uipoptgeneral General configuration options - * @{ - */ - -/** - * The size of the uIP packet buffer. - * - * The uIP packet buffer should not be smaller than 60 bytes, and does - * not need to be larger than 1514 bytes. Lower size results in lower - * TCP throughput, larger size results in higher TCP throughput. - * - * \hideinitializer - */ -#ifndef UIP_CONF_BUFFER_SIZE -#define UIP_BUFSIZE UIP_LINK_MTU + UIP_LLH_LEN -#else /* UIP_CONF_BUFFER_SIZE */ -#define UIP_BUFSIZE UIP_CONF_BUFFER_SIZE -#endif /* UIP_CONF_BUFFER_SIZE */ - - -/** - * Determines if statistics support should be compiled in. - * - * The statistics is useful for debugging and to show the user. - * - * \hideinitializer - */ -#ifndef UIP_CONF_STATISTICS -#define UIP_STATISTICS 0 -#else /* UIP_CONF_STATISTICS */ -#define UIP_STATISTICS UIP_CONF_STATISTICS -#endif /* UIP_CONF_STATISTICS */ - -/** - * Determines if logging of certain events should be compiled in. - * - * This is useful mostly for debugging. The function uip_log() - * must be implemented to suit the architecture of the project, if - * logging is turned on. - * - * \hideinitializer - */ -#ifndef UIP_CONF_LOGGING -#define UIP_LOGGING 0 -#else /* UIP_CONF_LOGGING */ -#define UIP_LOGGING UIP_CONF_LOGGING -#endif /* UIP_CONF_LOGGING */ - -/** - * Broadcast support. - * - * This flag configures IP broadcast support. This is useful only - * together with UDP. - * - * \hideinitializer - * - */ -#ifndef UIP_CONF_BROADCAST -#define UIP_BROADCAST 0 -#else /* UIP_CONF_BROADCAST */ -#define UIP_BROADCAST UIP_CONF_BROADCAST -#endif /* UIP_CONF_BROADCAST */ - -/** - * Print out a uIP log message. - * - * This function must be implemented by the module that uses uIP, and - * is called by uIP whenever a log message is generated. - */ -void uip_log(char *msg); - -/** - * The link level header length. - * - * This is the offset into the uip_buf where the IP header can be - * found. For Ethernet, this should be set to 14. For SLIP, this - * should be set to 0. - * - * \note we probably won't use this constant for other link layers than - * ethernet as they have variable header length (this is due to variable - * number and type of address fields and to optional security features) - * E.g.: 802.15.4 -> 2 + (1/2*4/8) + 0/5/6/10/14 - * 802.11 -> 4 + (6*3/4) + 2 - * \hideinitializer - */ -#ifdef UIP_CONF_LLH_LEN -#define UIP_LLH_LEN UIP_CONF_LLH_LEN -#else /* UIP_LLH_LEN */ -#define UIP_LLH_LEN 14 -#endif /* UIP_CONF_LLH_LEN */ - -/** @} */ -/*------------------------------------------------------------------------------*/ -/** - * \defgroup uipoptcpu CPU architecture configuration - * @{ - * - * The CPU architecture configuration is where the endianess of the - * CPU on which uIP is to be run is specified. Most CPUs today are - * little endian, and the most notable exception are the Motorolas - * which are big endian. The BYTE_ORDER macro should be changed to - * reflect the CPU architecture on which uIP is to be run. - */ - -/** - * The byte order of the CPU architecture on which uIP is to be run. - * - * This option can be either UIP_BIG_ENDIAN (Motorola byte order) or - * UIP_LITTLE_ENDIAN (Intel byte order). - * - * \hideinitializer - */ -#ifdef UIP_CONF_BYTE_ORDER -#define UIP_BYTE_ORDER UIP_CONF_BYTE_ORDER -#else /* UIP_CONF_BYTE_ORDER */ -#define UIP_BYTE_ORDER UIP_LITTLE_ENDIAN -#endif /* UIP_CONF_BYTE_ORDER */ - -/** @} */ -/*------------------------------------------------------------------------------*/ - -#include <ff.h> -#include <stdbool.h> -#include <stdint.h> - -#include "timer.h" - -typedef uint8_t u8_t; -typedef uint16_t u16_t; -typedef uint32_t u32_t; -typedef uint32_t uip_stats_t; - -/** - * \defgroup uipoptapp Application specific configurations - * @{ - * - * An uIP application is implemented using a single application - * function that is called by uIP whenever a TCP/IP event occurs. The - * name of this function must be registered with uIP at compile time - * using the UIP_APPCALL definition. - * - * uIP applications can store the application state within the - * uip_conn structure by specifying the type of the application - * structure by typedef:ing the type uip_tcp_appstate_t and uip_udp_appstate_t. - * - * The file containing the definitions must be included in the - * uipopt.h file. - * - * The following example illustrates how this can look. - \code - - void httpd_appcall(void); - #define UIP_APPCALL httpd_appcall - - struct httpd_state { - u8_t state; - u16_t count; - char *dataptr; - char *script; - }; - typedef struct httpd_state uip_tcp_appstate_t - \endcode -*/ -#define UIP_UDP_APPCALL uIPManagement_UDPCallback -void UIP_UDP_APPCALL(void); - -/** - * \var #define UIP_APPCALL - * - * The name of the application function that uIP should call in - * response to TCP/IP events. - * - */ -#define UIP_APPCALL uIPManagement_TCPCallback -void UIP_APPCALL(void); - -/** - * \var typedef uip_tcp_appstate_t - * - * The type of the application state that is to be stored in the - * uip_conn structure. This usually is typedef:ed to a struct holding - * application state information. - */ -typedef union -{ - struct - { - uint8_t CurrentState; - uint8_t NextState; - - char FileName[MAX_URI_LENGTH]; - FIL FileHandle; - bool FileOpen; - uint32_t ACKedFilePos; - uint16_t SentChunkSize; - } HTTPServer; - - struct - { - uint8_t CurrentState; - uint8_t NextState; - - uint8_t IssuedCommand; - } TELNETServer; -} uip_tcp_appstate_t; - -/** - * \var typedef uip_udp_appstate_t - * - * The type of the application state that is to be stored in the - * uip_conn structure. This usually is typedef:ed to a struct holding - * application state information. - */ -typedef union -{ - struct - { - uint8_t CurrentState; - struct timer Timeout; - - struct - { - uint8_t AllocatedIP[4]; - uint8_t Netmask[4]; - uint8_t GatewayIP[4]; - uint8_t ServerIP[4]; - } DHCPOffer_Data; - } DHCPClient; -} uip_udp_appstate_t; -/** @} */ - -#endif /* __UIPOPT_H__ */ -/** @} */ -/** @} */ - |