1 files changed, 0 insertions, 78 deletions
diff --git a/lib/lufa/Projects/USBtoSerial/USBtoSerial.txt b/lib/lufa/Projects/USBtoSerial/USBtoSerial.txt
deleted file mode 100644
index 0620f93938..0000000000
--- a/lib/lufa/Projects/USBtoSerial/USBtoSerial.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage USB to Serial Converter Project
- *
- *  \section Sec_Compat Project Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this project.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this project.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Communications Device Class (CDC)</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Abstract Control Model (ACM)</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF CDC Class Standard</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  USB to Serial bridge project. This project allows a USB AVR to serve
- *  as a USB to USART bridge between a USB host and a device lacking a
- *  USB port. When programmed into a USB AVR, the AVR will enumerate as a
- *  virtual COM port.
- *
- *  The AVR's hardware USART's settings will change to mirror as closely as
- *  possible the serial settings set on the host. However, due to hardware
- *  limitations, some options may not be supported (baud rates with unacceptable
- *  error rates at the AVR's clock speed, data lengths other than 6, 7 or 8 bits,
- *  1.5 stop bits, parity other than none, even or odd).
- *
- *  After running this project for the first time on a new computer,
- *  you will need to supply the .INF file located in this project
- *  project's directory as the device's driver when running under
- *  Windows. This will enable Windows to use its inbuilt CDC drivers,
- *  negating the need for custom drivers for the device. Other
- *  Operating Systems should automatically use their own inbuilt
- *  CDC-ACM drivers.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */
-