diff options
Diffstat (limited to 'lib/lufa/LUFA/Drivers/USB/Core/USBMode.h')
| -rw-r--r-- | lib/lufa/LUFA/Drivers/USB/Core/USBMode.h | 283 |
1 files changed, 0 insertions, 283 deletions
diff --git a/lib/lufa/LUFA/Drivers/USB/Core/USBMode.h b/lib/lufa/LUFA/Drivers/USB/Core/USBMode.h deleted file mode 100644 index 2044f899a9..0000000000 --- a/lib/lufa/LUFA/Drivers/USB/Core/USBMode.h +++ /dev/null @@ -1,283 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief USB mode and feature support definitions. - * \copydetails Group_USBMode - * - * \note This file should not be included directly. It is automatically included as needed by the USB driver - * dispatch header located in LUFA/Drivers/USB/USB.h. - */ - -/** \ingroup Group_USB - * \defgroup Group_USBMode USB Mode Tokens - * \brief USB mode and feature support definitions. - * - * This file defines macros indicating the type of USB controller the library is being compiled for, and its - * capabilities. These macros may then be referenced in the user application to selectively enable or disable - * code sections depending on if they are defined or not. - * - * After the inclusion of the master USB driver header, one or more of the following tokens may be defined, to - * allow the user code to conditionally enable or disable code based on the USB controller family and allowable - * USB modes. These tokens may be tested against to eliminate code relating to a USB mode which is not enabled for - * the given compilation. - * - * @{ - */ - -#ifndef __USBMODE_H__ -#define __USBMODE_H__ - - /* Enable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - extern "C" { - #endif - - /* Preprocessor Checks: */ - #if !defined(__INCLUDE_FROM_USB_DRIVER) - #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. - #endif - - /* Includes: */ - #include "../../../Common/Common.h" - - /* Public Interface - May be used in end-application: */ - #if defined(__DOXYGEN__) - /** Indicates that the target AVR microcontroller belongs to the Series 2 AVR8 USB controller - * (i.e. AT90USBxxx2 or ATMEGAxxU2) when defined. - */ - #define USB_SERIES_2_AVR - - /** Indicates that the target AVR microcontroller belongs to the Series 4 AVR8 USB controller - * (i.e. ATMEGAxxU4) when defined. - */ - #define USB_SERIES_4_AVR - - /** Indicates that the target AVR microcontroller belongs to the Series 6 AVR8 USB controller - * (i.e. AT90USBxxx6) when defined. - */ - #define USB_SERIES_6_AVR - - /** Indicates that the target AVR microcontroller belongs to the Series 7 AVR8 USB controller - * (i.e. AT90USBxxx7) when defined. - */ - #define USB_SERIES_7_AVR - - /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A0 Series USB controller - * (i.e. AT32UC3A0*) when defined. - */ - #define USB_SERIES_UC3A0_AVR - - /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A1 Series USB controller - * (i.e. AT32UC3A1*) when defined. - */ - #define USB_SERIES_UC3A1_AVR - - /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A3 Series USB controller - * (i.e. AT32UC3A3*) when defined. - */ - #define USB_SERIES_UC3A3_AVR - - /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A4 Series USB controller - * (i.e. AT32UC3A4*) when defined. - */ - #define USB_SERIES_UC3A4_AVR - - /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3B0 Series USB controller - * (i.e. AT32UC3B0*) when defined. - */ - #define USB_SERIES_UC3B0_AVR - - /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3B1 Series USB controller - * (i.e. AT32UC3B1*) when defined. - */ - #define USB_SERIES_UC3B1_AVR - - /** Indicates that the target AVR microcontroller belongs to the XMEGA A1U Series USB controller - * (i.e. ATXMEGA*A1U) when defined. - */ - #define USB_SERIES_A1U_XMEGA - - /** Indicates that the target AVR microcontroller belongs to the XMEGA A3U Series USB controller - * (i.e. ATXMEGA*A3U) when defined. - */ - #define USB_SERIES_A3U_XMEGA - - /** Indicates that the target AVR microcontroller belongs to the XMEGA A4U Series USB controller - * (i.e. ATXMEGA*A4U) when defined. - */ - #define USB_SERIES_A4U_XMEGA - - /** Indicates that the target AVR microcontroller belongs to the XMEGA B1 Series USB controller - * (i.e. ATXMEGA*B1) when defined. - */ - #define USB_SERIES_B1_XMEGA - - /** Indicates that the target AVR microcontroller belongs to the XMEGA B3 Series USB controller - * (i.e. ATXMEGA*B3) when defined. - */ - #define USB_SERIES_B3_XMEGA - - /** Indicates that the target AVR microcontroller belongs to the XMEGA C3 Series USB controller - * (i.e. ATXMEGA*C3) when defined. - */ - #define USB_SERIES_C3_XMEGA - - /** Indicates that the target AVR microcontroller belongs to the XMEGA C4 Series USB controller - * (i.e. ATXMEGA*C4) when defined. - */ - #define USB_SERIES_C4_XMEGA - - /** Indicates that the target microcontroller and compilation settings allow for the - * target to be configured in USB Device mode when defined. - */ - #define USB_CAN_BE_DEVICE - - /** Indicates that the target microcontroller and compilation settings allow for the - * target to be configured in USB Host mode when defined. - */ - #define USB_CAN_BE_HOST - - /** Indicates that the target microcontroller and compilation settings allow for the - * target to be configured in either USB Device or Host mode when defined. - */ - #define USB_CAN_BE_BOTH - #else - /* Macros: */ - #if (defined(__AVR_AT90USB162__) || defined(__AVR_AT90USB82__) || \ - defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega8U2__)) - #define USB_SERIES_2_AVR - #define USB_CAN_BE_DEVICE - #elif (defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega16U4__)) - #define USB_SERIES_4_AVR - #define USB_CAN_BE_DEVICE - #elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)) - #define USB_SERIES_6_AVR - #define USB_CAN_BE_DEVICE - #elif (defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__)) - #define USB_SERIES_7_AVR - #define USB_CAN_BE_DEVICE - #define USB_CAN_BE_HOST - #elif (defined(__AVR32_UC3A0512__) || defined(__AVR32_UC3A0256__) || \ - defined(__AVR32_UC3A0128__) || defined(__AVR32_UC3A064__)) - #define USB_SERIES_UC3A0_AVR32 - #define USB_CAN_BE_DEVICE - #define USB_CAN_BE_HOST - #elif (defined(__AVR32_UC3A1512__) || defined(__AVR32_UC3A1256__) || \ - defined(__AVR32_UC3A1128__) || defined(__AVR32_UC3A164__)) - #define USB_SERIES_UC3A1_AVR32 - #define USB_CAN_BE_DEVICE - #define USB_CAN_BE_HOST - #elif (defined(__AVR32_UC3A3256__) || defined(__AVR32_UC3A3256S__) || \ - defined(__AVR32_UC3A3128__) || defined(__AVR32_UC3A3128S__) || \ - defined(__AVR32_UC3A364__) || defined(__AVR32_UC3A364S__)) - #define USB_SERIES_UC3A3_AVR32 - #define USB_CAN_BE_DEVICE - #define USB_CAN_BE_HOST - #elif (defined(__AVR32_UC3A4256__) || defined(__AVR32_UC3A4256S__) || \ - defined(__AVR32_UC3A4128__) || defined(__AVR32_UC3A4128S__) || \ - defined(__AVR32_UC3A464__) || defined(__AVR32_UC3A464S__)) - #define USB_SERIES_UC3A4_AVR32 - #define USB_CAN_BE_DEVICE - #define USB_CAN_BE_HOST - #elif (defined(__AVR32_UC3B0512__) || defined(__AVR32_UC3B0256__) || \ - defined(__AVR32_UC3B0128__) || defined(__AVR32_UC3B064__)) - #define USB_SERIES_UC3B0_AVR32 - #define USB_CAN_BE_DEVICE - #define USB_CAN_BE_HOST - #elif (defined(__AVR32_UC3B1512__) || defined(__AVR32_UC3B1256__) || \ - defined(__AVR32_UC3B1128__) || defined(__AVR32_UC3B164__)) - #define USB_SERIES_UC3B1_AVR32 - #define USB_CAN_BE_DEVICE - #define USB_CAN_BE_HOST - #elif (defined(__AVR_ATxmega128A1U__) || defined(__AVR_ATxmega64A1U__)) - #define USB_SERIES_A1U_XMEGA - #define USB_CAN_BE_DEVICE - #elif (defined(__AVR_ATxmega64A3U__) || defined(__AVR_ATxmega128A3U__) || \ - defined(__AVR_ATxmega192A3U__) || defined(__AVR_ATxmega256A3U__)) - #define USB_SERIES_A3U_XMEGA - #define USB_CAN_BE_DEVICE - #elif (defined(__AVR_ATxmega256A3BU__)) - #define USB_SERIES_A3BU_XMEGA - #define USB_CAN_BE_DEVICE - #elif (defined(__AVR_ATxmega16A4U__) || defined(__AVR_ATxmega32A4U__) || \ - defined(__AVR_ATxmega64A4U__) || defined(__AVR_ATxmega128A4U__)) - #define USB_SERIES_A4U_XMEGA - #define USB_CAN_BE_DEVICE - #elif (defined(__AVR_ATxmega128B1__) || defined(__AVR_ATxmega64B1__)) - #define USB_SERIES_B1_XMEGA - #define USB_CAN_BE_DEVICE - #elif (defined(__AVR_ATxmega128B3__) || defined(__AVR_ATxmega64B3__)) - #define USB_SERIES_B3_XMEGA - #define USB_CAN_BE_DEVICE - #elif (defined(__AVR_ATxmega128C3__) || defined(__AVR_ATxmega64C3__) || \ - defined(__AVR_ATxmega192C3__) || defined(__AVR_ATxmega256C3__) || \ - defined(__AVR_ATxmega384C3__)) - #define USB_SERIES_C3_XMEGA - #define USB_CAN_BE_DEVICE - #elif (defined(__AVR_ATxmega16C4__) || defined(__AVR_ATxmega32C4__)) - #define USB_SERIES_C4_XMEGA - #define USB_CAN_BE_DEVICE - #endif - - #if (defined(USB_HOST_ONLY) && defined(USB_DEVICE_ONLY)) - #error USB_HOST_ONLY and USB_DEVICE_ONLY are mutually exclusive. - #elif defined(USB_HOST_ONLY) - #if !defined(USB_CAN_BE_HOST) - #error USB_HOST_ONLY is not available for the currently selected microcontroller model. - #else - #undef USB_CAN_BE_DEVICE - #endif - #elif defined(USB_DEVICE_ONLY) - #if !defined(USB_CAN_BE_DEVICE) - #error USB_DEVICE_ONLY is not available for the currently selected microcontroller model. - #else - #undef USB_CAN_BE_HOST - #endif - #endif - - #if (defined(USB_CAN_BE_DEVICE) && defined(USB_CAN_BE_HOST)) - #define USB_CAN_BE_BOTH - #endif - - #if (!defined(USB_CAN_BE_DEVICE) && !defined(USB_CAN_BE_HOST)) - #error The currently selected device, USB mode or architecture is not supported. - #endif - #endif - - /* Disable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - } - #endif - -#endif - -/** @} */ - |