diff options
Diffstat (limited to 'lib/lufa/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt')
| -rw-r--r-- | lib/lufa/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt | 68 |
1 files changed, 0 insertions, 68 deletions
diff --git a/lib/lufa/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt b/lib/lufa/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt deleted file mode 100644 index 4b07261c4f..0000000000 --- a/lib/lufa/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt +++ /dev/null @@ -1,68 +0,0 @@ -/** \file - * - * This file contains special DoxyGen information for the generation of the main page and other special - * documentation pages. It is not a project source file. - */ - -/** \mainpage Mass Storage Host Demo - * - * \section Sec_Compat Demo Compatibility: - * - * The following list indicates what microcontrollers are compatible with this demo. - * - * \li Series 7 USB AVRs (AT90USBxxx7) - * - * \section Sec_Info USB Information: - * - * The following table gives a rundown of the USB utilization of this demo. - * - * <table> - * <tr> - * <td><b>USB Mode:</b></td> - * <td>Host</td> - * </tr> - * <tr> - * <td><b>USB Class:</b></td> - * <td>Mass Storage Device</td> - * </tr> - * <tr> - * <td><b>USB Subclass:</b></td> - * <td>Bulk Only</td> - * </tr> - * <tr> - * <td><b>Relevant Standards:</b></td> - * <td>USBIF Mass Storage Standard \n - * USB Bulk-Only Transport Standard \n - * SCSI Primary Commands Specification \n - * SCSI Block Commands Specification</td> - * </tr> - * <tr> - * <td><b>Supported USB Speeds:</b></td> - * <td>Full Speed Mode</td> - * </tr> - * </table> - * - * \section Sec_Description Project Description: - * - * Mass Storage host demonstration application. This gives a simple reference - * application for implementing a USB Mass Storage host, for USB storage devices - * using the standard Mass Storage USB profile. - * - * The first 512 bytes (boot sector) of an attached disk's memory will be dumped - * out of the serial port in HEX and ASCII form when it is attached to the AT90USB1287 - * AVR. The device will then wait for HWB to be pressed, whereupon the entire ASCII contents - * of the disk will be dumped to the serial port. - * - * \section Sec_Options Project Options - * - * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. - * - * <table> - * <tr> - * <td> - * None - * </td> - * </tr> - * </table> - */ - |