summaryrefslogtreecommitdiff
path: root/keyboards/toad
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/toad')
-rw-r--r--keyboards/toad/config.h54
-rw-r--r--keyboards/toad/keymaps/ansi_wk/keymap.c15
-rw-r--r--keyboards/toad/keymaps/ansi_wkl/keymap.c13
-rw-r--r--keyboards/toad/keymaps/default/keymap.c13
-rw-r--r--keyboards/toad/keymaps/iso_wk/keymap.c13
-rw-r--r--keyboards/toad/keymaps/iso_wkl/keymap.c13
-rw-r--r--keyboards/toad/readme.md14
-rw-r--r--keyboards/toad/rules.mk56
-rw-r--r--keyboards/toad/toad.c18
-rw-r--r--keyboards/toad/toad.h91
10 files changed, 300 insertions, 0 deletions
diff --git a/keyboards/toad/config.h b/keyboards/toad/config.h
new file mode 100644
index 0000000000..f1d32c15b6
--- /dev/null
+++ b/keyboards/toad/config.h
@@ -0,0 +1,54 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6776
+#define DEVICE_VER 0x0001
+#define MANUFACTURER farmakon
+#define PRODUCT "TOAD"
+#define DESCRIPTION "TOAD"
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 14
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B0, F6, F5, F4, F1, F0 }
+#define MATRIX_COL_PINS { B3, B2, B1, E6, B7, C7, C6, D4, D6, D7, B4, D0, D1, F7 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 0
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 0
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif
diff --git a/keyboards/toad/keymaps/ansi_wk/keymap.c b/keyboards/toad/keymaps/ansi_wk/keymap.c
new file mode 100644
index 0000000000..a4fd348f0e
--- /dev/null
+++ b/keyboards/toad/keymaps/ansi_wk/keymap.c
@@ -0,0 +1,15 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ LAYOUT_ansi_wk(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL, KC_BSPC, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC, KC_RBRC, KC_BSLS, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, \
+ KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL
+ )
+};
+
+
diff --git a/keyboards/toad/keymaps/ansi_wkl/keymap.c b/keyboards/toad/keymaps/ansi_wkl/keymap.c
new file mode 100644
index 0000000000..7fb6b3b599
--- /dev/null
+++ b/keyboards/toad/keymaps/ansi_wkl/keymap.c
@@ -0,0 +1,13 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ LAYOUT_ansi_wkl(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL, KC_BSPC, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC, KC_RBRC, KC_BSLS, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, \
+ KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_RCTL
+ )
+};
diff --git a/keyboards/toad/keymaps/default/keymap.c b/keyboards/toad/keymaps/default/keymap.c
new file mode 100644
index 0000000000..4c30bdc442
--- /dev/null
+++ b/keyboards/toad/keymaps/default/keymap.c
@@ -0,0 +1,13 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ LAYOUT_all(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
+ KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, \
+ KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL
+ )
+};
diff --git a/keyboards/toad/keymaps/iso_wk/keymap.c b/keyboards/toad/keymaps/iso_wk/keymap.c
new file mode 100644
index 0000000000..2025504321
--- /dev/null
+++ b/keyboards/toad/keymaps/iso_wk/keymap.c
@@ -0,0 +1,13 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ LAYOUT_iso_wk(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL, KC_BSPC, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC, KC_RBRC, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_NUHS, KC_ENT, \
+ KC_LSFT, KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, \
+ KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL
+ )
+};
diff --git a/keyboards/toad/keymaps/iso_wkl/keymap.c b/keyboards/toad/keymaps/iso_wkl/keymap.c
new file mode 100644
index 0000000000..1659d7b384
--- /dev/null
+++ b/keyboards/toad/keymaps/iso_wkl/keymap.c
@@ -0,0 +1,13 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ LAYOUT_iso_wkl(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL, KC_BSPC, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC, KC_RBRC, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_NUHS, KC_ENT, \
+ KC_LSFT, KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, \
+ KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_RCTL
+ )
+};
diff --git a/keyboards/toad/readme.md b/keyboards/toad/readme.md
new file mode 100644
index 0000000000..3f3bff5b5b
--- /dev/null
+++ b/keyboards/toad/readme.md
@@ -0,0 +1,14 @@
+# Toad
+
+Toad: 70% Mechanical Keyboard PCB.
+
+Toad schematic and PCB are available opensource under Creative Commons BY-SA 3.0 license on EasyEDA at [this link](https://easyeda.com/farmakon/70_Keyboard-d4f6baf4792d4ada9c0571fa3713e461)
+
+For more informations on the Toad please visit this [geekhack.org thread](https://geekhack.org/index.php?topic=91388.0)
+
+Make examples for these keyboards (after setting up your build environment):
+
+ make toad:default
+
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/toad/rules.mk b/keyboards/toad/rules.mk
new file mode 100644
index 0000000000..ee87c6e8d4
--- /dev/null
+++ b/keyboards/toad/rules.mk
@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no # Console for debug(+400)
+COMMAND_ENABLE ?= no # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality
+AUDIO_ENABLE ?= no
+RGBLIGHT_ENABLE ?= no \ No newline at end of file
diff --git a/keyboards/toad/toad.c b/keyboards/toad/toad.c
new file mode 100644
index 0000000000..bc4db0339e
--- /dev/null
+++ b/keyboards/toad/toad.c
@@ -0,0 +1,18 @@
+#include "toad.h"
+
+void led_set_user(uint8_t usb_led) {
+
+ //LED1
+ if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+ DDRB |= (1 << 6); PORTB &= ~(1 << 6);
+ } else {
+ DDRB &= ~(1 << 6); PORTB &= ~(1 << 6);
+ }
+
+ //LED2
+ if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+ DDRB |= (1 << 5); PORTB &= ~(1 << 5);
+ } else {
+ DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
+ }
+}
diff --git a/keyboards/toad/toad.h b/keyboards/toad/toad.h
new file mode 100644
index 0000000000..154068e42a
--- /dev/null
+++ b/keyboards/toad/toad.h
@@ -0,0 +1,91 @@
+#ifndef TOAD
+#define TOAD
+
+#include "quantum.h"
+
+// 70% keyboard: default - all keys
+#define LAYOUT_all( \
+ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, \
+ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K013, \
+ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \
+ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, \
+ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, \
+ K500, K501, K502, K507, K510, K511, K512, K513 \
+) { \
+ { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
+ { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113 }, \
+ { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213 }, \
+ { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313 }, \
+ { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413 }, \
+ { K500, K501, K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,K510, K511, K512, K513 } \
+}
+
+// 70% keyboard: ANSI Winkey
+#define LAYOUT_ansi_wk( \
+ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, \
+ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013, \
+ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \
+ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \
+ K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, \
+ K500, K501, K502, K507, K510, K511, K512, K513 \
+) { \
+ { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
+ { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO}, \
+ { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213 }, \
+ { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO,K313 }, \
+ { K400, KC_NO,K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO}, \
+ { K500, K501, K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,K510, K511, K512, K513 } \
+}
+
+// 70% keyboard: ANSI Winkeyless
+#define LAYOUT_ansi_wkl( \
+ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, \
+ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013, \
+ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \
+ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \
+ K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, \
+ K500, K502, K507, K511, K513 \
+) { \
+ { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
+ { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO}, \
+ { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213 }, \
+ { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO,K313 }, \
+ { K400, KC_NO,K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO}, \
+ { K500, KC_NO,K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,KC_NO,K511, KC_NO,K513 } \
+}
+
+// 70% keyboard: ISO Winkey
+#define LAYOUT_iso_wk( \
+ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, \
+ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013, \
+ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, \
+ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, \
+ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, \
+ K500, K501, K502, K507, K510, K511, K512, K513 \
+) { \
+ { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
+ { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO}, \
+ { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO}, \
+ { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313 }, \
+ { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO}, \
+ { K500, K501, K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,K510, K511, K512, K513 } \
+}
+
+// 70% keyboard: ISO Winkeyless
+#define LAYOUT_iso_wkl( \
+ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, \
+ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K013, \
+ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, \
+ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, \
+ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, \
+ K500, K502, K507, K511, K513 \
+) { \
+ { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \
+ { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO}, \
+ { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO}, \
+ { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313 }, \
+ { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO}, \
+ { K500, KC_NO,K502, KC_NO,KC_NO,KC_NO,KC_NO,K507, KC_NO,KC_NO,KC_NO,K511, KC_NO,K513 } \
+}
+
+#endif