summaryrefslogtreecommitdiff
path: root/keyboards/speedo/readme.md
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/speedo/readme.md')
-rw-r--r--keyboards/speedo/readme.md17
1 files changed, 5 insertions, 12 deletions
diff --git a/keyboards/speedo/readme.md b/keyboards/speedo/readme.md
index 0e281b0388..ee94623acd 100644
--- a/keyboards/speedo/readme.md
+++ b/keyboards/speedo/readme.md
@@ -2,22 +2,15 @@
![Speedo](https://raw.githubusercontent.com/pcewing/speedo/master/build_log/images/04-03_23-09-56_00.jpg)
-#### Keyboard Maintainer
-[Paul Ewing](https://github.com/pcewing)
+Keyboard Maintainer: [Paul Ewing](https://github.com/pcewing)
+Hardware Supported: Teensy 2.0
+Hardware Availability: You will have to get the plates cut by an online service such as Ponoko. Case files are available in the [Speedo Repository](https://github.com/pcewing/speedo).
-#### Hardware Supported
-Teensy 2.0
+Make example for this keyboard (after setting up your build environment):
-#### Hardware Availability
-You will have to get the plates cut by an online service such as Ponoko. Case files are available in the [Speedo Repository](https://github.com/pcewing/speedo)
-
-## Building the Firmware:
-```
-make speedo:default
-```
+ make speedo:default
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
## Flashing the Firmware
See the QMK docs for handwiring a keyboard; there is a section with instructions on how to flash the *.hex* file to the Teensy 2.0 controller.
-