summaryrefslogtreecommitdiff
path: root/keyboards/lfkeyboards/lfkpad/lfkpad.c
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/lfkeyboards/lfkpad/lfkpad.c')
-rw-r--r--keyboards/lfkeyboards/lfkpad/lfkpad.c92
1 files changed, 46 insertions, 46 deletions
diff --git a/keyboards/lfkeyboards/lfkpad/lfkpad.c b/keyboards/lfkeyboards/lfkpad/lfkpad.c
index 232285c322..b91b7da67d 100644
--- a/keyboards/lfkeyboards/lfkpad/lfkpad.c
+++ b/keyboards/lfkeyboards/lfkpad/lfkpad.c
@@ -1,112 +1,117 @@
-#include <avr/sfr_defs.h>
+#include "lfkpad.h"
+
+#include "quantum.h"
+
#include <avr/timer_avr.h>
#include <avr/wdt.h>
-#include "lfkpad.h"
-#include "keymap.h"
#include "issi.h"
#include "TWIlib.h"
#include "lighting.h"
-#include "debug.h"
-#include "quantum.h"
uint16_t click_hz = CLICK_HZ;
uint16_t click_time = CLICK_MS;
uint8_t click_toggle = CLICK_ENABLED;
-
-void matrix_init_kb(void)
-{
+void matrix_init_kb(void) {
matrix_init_user();
+
#ifndef AUDIO_ENABLE
// If we're not using the audio pin, drive it low
- sbi(DDRC, 6);
- cbi(PORTC, 6);
+ setPinOutput(C6);
+ writePinLow(C6);
#endif
#ifdef ISSI_ENABLE
issi_init();
#endif
+
#ifdef WATCHDOG_ENABLE
// This is done after turning the layer LED red, if we're caught in a loop
// we should get a flashing red light
wdt_enable(WDTO_500MS);
#endif
-
}
-void matrix_scan_kb(void)
-{
+void matrix_scan_kb(void) {
#ifdef WATCHDOG_ENABLE
wdt_reset();
#endif
+
#ifdef ISSI_ENABLE
// switch/underglow lighting update
static uint32_t issi_device = 0;
static uint32_t twi_last_ready = 0;
- if(twi_last_ready > 1000){
- // Its been way too long since the last ISSI update, reset the I2C bus and start again
+
+ if (twi_last_ready > 1000) {
+ // It's been way too long since the last ISSI update, reset the I2C bus and start again
dprintf("TWI failed to recover, TWI re-init\n");
twi_last_ready = 0;
TWIInit();
force_issi_refresh();
}
- if(isTWIReady()){
+
+ if (isTWIReady()) {
twi_last_ready = 0;
// If the i2c bus is available, kick off the issi update, alternate between devices
update_issi(issi_device, issi_device);
- if(issi_device){
+
+ if (issi_device) {
issi_device = 0;
- }else{
+ } else {
issi_device = 3;
}
- }else{
+ } else {
twi_last_ready++;
}
#endif
+
matrix_scan_user();
}
-void click(uint16_t freq, uint16_t duration){
+void click(uint16_t freq, uint16_t duration) {
#ifdef AUDIO_ENABLE
- if(freq >= 100 && freq <= 20000 && duration < 100){
+ if (freq >= 100 && freq <= 20000 && duration < 100) {
play_note(freq, 10);
- for (uint16_t i = 0; i < duration; i++){
+
+ for (uint16_t i = 0; i < duration; i++) {
_delay_ms(1);
}
+
stop_all_notes();
}
#endif
}
-bool process_record_kb(uint16_t keycode, keyrecord_t* record)
-{
- if (click_toggle && record->event.pressed){
+bool process_record_kb(uint16_t keycode, keyrecord_t* record) {
+ if (click_toggle && record->event.pressed) {
click(click_hz, click_time);
}
+
if (keycode == RESET) {
reset_keyboard_kb();
- } else {
}
+
return process_record_user(keycode, record);
}
-void action_function(keyrecord_t *event, uint8_t id, uint8_t opt)
-{
+void action_function(keyrecord_t *event, uint8_t id, uint8_t opt) {
#ifdef AUDIO_ENABLE
int8_t sign = 1;
#endif
- if(id == LFK_ESC_TILDE){
+
+ if (id == LFK_ESC_TILDE) {
// Send ~ on shift-esc
void (*method)(uint8_t) = (event->event.pressed) ? &add_key : &del_key;
- uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT));
- if(layer_state == 0){
+ uint8_t shifted = get_mods() & MOD_MASK_SHIFT;
+
+ if (layer_state == 0) {
method(shifted ? KC_GRAVE : KC_ESCAPE);
- }else{
+ } else {
method(shifted ? KC_ESCAPE : KC_GRAVE);
}
send_keyboard_report();
- }else if(event->event.pressed){
- switch(id){
+ } else if (event->event.pressed) {
+ switch (id) {
case LFK_SET_DEFAULT_LAYER:
// set/save the current base layer to eeprom, falls through to LFK_CLEAR
eeconfig_update_default_layer(1UL << opt);
@@ -117,24 +122,24 @@ void action_function(keyrecord_t *event, uint8_t id, uint8_t opt)
break;
#ifdef AUDIO_ENABLE
case LFK_CLICK_FREQ_LOWER:
- sign = -1; // continue to next statement
+ sign = -1; // continue to next statement
case LFK_CLICK_FREQ_HIGHER:
click_hz += sign * 100;
click(click_hz, click_time);
break;
case LFK_CLICK_TOGGLE:
- if(click_toggle){
+ if (click_toggle) {
click_toggle = 0;
click(4000, 100);
click(1000, 100);
- }else{
+ } else {
click_toggle = 1;
click(1000, 100);
click(4000, 100);
}
break;
case LFK_CLICK_TIME_SHORTER:
- sign = -1; // continue to next statement
+ sign = -1; // continue to next statement
case LFK_CLICK_TIME_LONGER:
click_time += sign;
click(click_hz, click_time);
@@ -144,22 +149,18 @@ void action_function(keyrecord_t *event, uint8_t id, uint8_t opt)
}
}
-void reset_keyboard_kb(){
+void reset_keyboard_kb() {
#ifdef WATCHDOG_ENABLE
MCUSR = 0;
wdt_disable();
wdt_reset();
#endif
- reset_keyboard();
-}
-void led_set_kb(uint8_t usb_led)
-{
- led_set_user(usb_led);
+ reset_keyboard();
}
// LFK lighting info
-const uint8_t rgb_matrices[] = {0, 1};
+const uint8_t rgb_matrices[] = { 0, 1 };
const uint8_t rgb_sequence[] = {
32, 1, 2, 3,
31, 30, 5, 6,
@@ -172,5 +173,4 @@ const uint8_t rgb_sequence[] = {
4, 25,
13, 24,
20
-
};