summaryrefslogtreecommitdiff
path: root/keyboards/hhkb
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/hhkb')
-rw-r--r--keyboards/hhkb/Makefile91
-rw-r--r--keyboards/hhkb/keymaps/shela/Makefile1
-rw-r--r--keyboards/hhkb/keymaps/shela/action_pseudo_lut.c142
-rw-r--r--keyboards/hhkb/keymaps/shela/action_pseudo_lut.h15
-rw-r--r--keyboards/hhkb/keymaps/shela/config.h12
-rw-r--r--keyboards/hhkb/keymaps/shela/keymap.c179
-rw-r--r--keyboards/hhkb/keymaps/shela/keymap_jis2us.h32
-rw-r--r--keyboards/hhkb/keymaps/shela/readme.md14
-rw-r--r--keyboards/hhkb/readme.md8
-rw-r--r--keyboards/hhkb/rules.mk84
10 files changed, 486 insertions, 92 deletions
diff --git a/keyboards/hhkb/Makefile b/keyboards/hhkb/Makefile
index 6fe973e1eb..4e2a6f00fd 100644
--- a/keyboards/hhkb/Makefile
+++ b/keyboards/hhkb/Makefile
@@ -1,90 +1,3 @@
-
-
-# project specific files
-SRC = matrix.c
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-#OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-# as per original hasu settings
-OPT_DEFS += -DBOOTLOADER_SIZE=512
-
-# Build Options
-# comment out to disable the options.
-#
-BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
-CONSOLE_ENABLE ?= yes # Console for debug(+400)
-COMMAND_ENABLE ?= yes # Commands for debug and configuration
-CUSTOM_MATRIX ?= yes # Custom matrix file for the HHKB
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
-# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
-# MIDI_ENABLE ?= YES # MIDI controls
-# UNICODE_ENABLE ?= YES # Unicode
-# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
-
-
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
include ../../Makefile
-endif
-
-ifneq (, $(findstring yes, $(HHKB_JP)))
- OPT_DEFS += -DHHKB_JP
-endif
-
-debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
-debug-on: all
-
-debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT
-debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS))
-debug-off: all
+endif \ No newline at end of file
diff --git a/keyboards/hhkb/keymaps/shela/Makefile b/keyboards/hhkb/keymaps/shela/Makefile
new file mode 100644
index 0000000000..d0586bda68
--- /dev/null
+++ b/keyboards/hhkb/keymaps/shela/Makefile
@@ -0,0 +1 @@
+SRC += action_pseudo_lut.c
diff --git a/keyboards/hhkb/keymaps/shela/action_pseudo_lut.c b/keyboards/hhkb/keymaps/shela/action_pseudo_lut.c
new file mode 100644
index 0000000000..b205968c7b
--- /dev/null
+++ b/keyboards/hhkb/keymaps/shela/action_pseudo_lut.c
@@ -0,0 +1,142 @@
+#include "quantum.h"
+#include "action_pseudo_lut.h"
+
+static uint8_t send_key_shift_bit[SHIFT_BIT_SIZE];
+
+/*
+ * Pseudo layout action.
+ * This action converts a keycode in order to output the character according to the keymap you specified
+ * still your keyboard layout recognized wrongly on your OS.
+ * Memo: Using other layer keymap to get keycode
+ */
+void action_pseudo_lut(keyrecord_t *record, uint8_t base_keymap_id, const uint16_t (*keymap)[2]) {
+ static uint8_t prev_shift;
+ uint16_t keycode;
+ uint16_t pseudo_keycode;
+
+ /* get keycode from keymap you specified */
+ keycode = keymap_key_to_keycode(base_keymap_id, record->event.key);
+
+ prev_shift = keyboard_report->mods & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT));
+
+ if (record->event.pressed) {
+ /* when magic commands entered, keycode does not converted */
+ if (IS_COMMAND()) {
+ if (prev_shift) {
+ add_shift_bit(keycode);
+ }
+ register_code(keycode);
+ return;
+ }
+
+ if (prev_shift) {
+ pseudo_keycode = convert_keycode(keymap, keycode, true);
+ dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode);
+ add_shift_bit(keycode);
+
+ if (IS_LSFT(pseudo_keycode)) {
+ register_code(QK_LSFT ^ pseudo_keycode);
+ } else {
+ /* delete shift mod temporarily */
+ del_mods(prev_shift);
+ send_keyboard_report();
+ register_code(pseudo_keycode);
+ add_mods(prev_shift);
+ send_keyboard_report();
+ }
+ } else {
+ pseudo_keycode = convert_keycode(keymap, keycode, false);
+ dprintf("pressed: %02X, converted: %04X\n", keycode, pseudo_keycode);
+
+ if (IS_LSFT(pseudo_keycode)) {
+ add_weak_mods(MOD_BIT(KC_LSFT));
+ send_keyboard_report();
+ register_code(QK_LSFT ^ pseudo_keycode);
+ /* on Windows, prevent key repeat to avoid unintended output */
+ unregister_code(QK_LSFT ^ pseudo_keycode);
+ del_weak_mods(MOD_BIT(KC_LSFT));
+ send_keyboard_report();
+ } else {
+ register_code(pseudo_keycode);
+ }
+ }
+ } else {
+ if (get_shift_bit(keycode)) {
+ del_shift_bit(keycode);
+ pseudo_keycode = convert_keycode(keymap, keycode, true);
+ } else {
+ pseudo_keycode = convert_keycode(keymap, keycode, false);
+ }
+ dprintf("released: %02X, converted: %04X\n", keycode, pseudo_keycode);
+
+ if (IS_LSFT(pseudo_keycode)) {
+ unregister_code(QK_LSFT ^ pseudo_keycode);
+ } else {
+ unregister_code(pseudo_keycode);
+ }
+ }
+}
+
+uint16_t convert_keycode(const uint16_t (*keymap)[2], uint16_t keycode, bool shift_modded)
+{
+ uint16_t pseudo_keycode;
+
+ switch (keycode) {
+ case KC_A ... KC_CAPSLOCK:
+#if defined(__AVR__)
+ if (shift_modded) {
+ pseudo_keycode = pgm_read_word(&keymap[keycode][1]);
+ } else {
+ pseudo_keycode = pgm_read_word(&keymap[keycode][0]);
+ }
+#else
+ if (shift_modded) {
+ pseudo_keycode = keymap[keycode][1];
+ } else {
+ pseudo_keycode = keymap[keycode][0];
+ }
+#endif
+ /* if undefined, use got keycode as it is */
+ if (pseudo_keycode == 0x00) {
+ if (shift_modded) {
+ pseudo_keycode = S(keycode);
+ } else {
+ pseudo_keycode = keycode;
+ }
+ }
+ break;
+ default:
+ if (shift_modded) {
+ pseudo_keycode = S(keycode);
+ } else {
+ pseudo_keycode = keycode;
+ }
+ break;
+ }
+ return pseudo_keycode;
+}
+
+uint8_t get_shift_bit(uint16_t keycode) {
+ if ((keycode >> 3) < SHIFT_BIT_SIZE) {
+ return send_key_shift_bit[keycode >> 3] & (1 << (keycode & 7));
+ } else {
+ dprintf("get_shift_bit: Can't get shift bit. keycode: %02X\n", keycode);
+ return 0;
+ }
+}
+
+void add_shift_bit(uint16_t keycode) {
+ if ((keycode >> 3) < SHIFT_BIT_SIZE) {
+ send_key_shift_bit[keycode >> 3] |= (1 << (keycode & 7));
+ } else {
+ dprintf("add_shift_bit: Can't add shift bit. keycode: %02X\n", keycode);
+ }
+}
+
+void del_shift_bit(uint16_t keycode) {
+ if ((keycode >> 3) < SHIFT_BIT_SIZE) {
+ send_key_shift_bit[keycode >> 3] &= ~(1 << (keycode & 7));
+ } else {
+ dprintf("del_shift_bit: Can't delete shift bit. keycode: %02X\n", keycode);
+ }
+}
diff --git a/keyboards/hhkb/keymaps/shela/action_pseudo_lut.h b/keyboards/hhkb/keymaps/shela/action_pseudo_lut.h
new file mode 100644
index 0000000000..681252440f
--- /dev/null
+++ b/keyboards/hhkb/keymaps/shela/action_pseudo_lut.h
@@ -0,0 +1,15 @@
+#ifndef ACTION_PSEUDO_LUT_H
+#define ACTION_PSEUDO_LUT_H
+
+#define SHIFT_BIT_SIZE (0xE7 / 8 + 1) // 1bit per 1key
+
+#define IS_LSFT(kc) ((QK_LSFT & (kc)) == QK_LSFT)
+
+void action_pseudo_lut(keyrecord_t *, uint8_t, const uint16_t (*)[2]);
+uint16_t convert_keycode(const uint16_t (*)[2], uint16_t, bool);
+
+uint8_t get_shift_bit(uint16_t);
+void add_shift_bit(uint16_t);
+void del_shift_bit(uint16_t);
+
+#endif
diff --git a/keyboards/hhkb/keymaps/shela/config.h b/keyboards/hhkb/keymaps/shela/config.h
new file mode 100644
index 0000000000..08cc1fb46e
--- /dev/null
+++ b/keyboards/hhkb/keymaps/shela/config.h
@@ -0,0 +1,12 @@
+#ifndef CONFIG_SHELA_H
+#define CONFIG_SHELA_H
+
+#include "../../config.h"
+
+#undef TAPPING_TERM
+#define TAPPING_TERM 230
+
+#define ONESHOT_TAP_TOGGLE 2
+#define ONESHOT_TIMEOUT 2000
+
+#endif
diff --git a/keyboards/hhkb/keymaps/shela/keymap.c b/keyboards/hhkb/keymaps/shela/keymap.c
new file mode 100644
index 0000000000..c286b99de8
--- /dev/null
+++ b/keyboards/hhkb/keymaps/shela/keymap.c
@@ -0,0 +1,179 @@
+/*
+ * HHKB Pro 2 US Layout for shela
+ */
+#include "hhkb.h"
+#include "keymap_jis2us.h"
+#include "action_pseudo_lut.h"
+
+enum keymap_layout {
+ BASE = 0,
+ PSEUDO_US,
+ DVORAK,
+ MOUSE,
+ TENKEY,
+ HHKB,
+ SPACE_FN,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /* Layer 0: Default Layer
+ * ,-----------------------------------------------------------------------------------------.
+ * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | ` | BSp |
+ * |-----------------------------------------------------------------------------------------|
+ * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ |
+ * |-----------------------------------------------------------------------------------------|
+ * | Control | A | S | D | F | G | H | J | K | L | ; | ' | Enter |
+ * |-----------------------------------------------------------------------------------------|
+ * | Shift | Z | X | C | V | B | N | M | , | . | / | Shift | Fn0 |
+ * `-----------------------------------------------------------------------------------------'
+ * |LAlt | LGui | SpaceFN | RGui |RAlt |
+ * `-----------------------------------------------------------------'
+ */
+ [BASE] =
+ KEYMAP(KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_GRV, KC_BSPC, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS, \
+ KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_ENT, \
+ OSM(MOD_LSFT),KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,KC_FN0, \
+ KC_LALT,KC_LGUI, KC_FN2, KC_RGUI,KC_RALT),
+
+ /* Layer 1: Pseudo US Layout Layer */
+ [PSEUDO_US] =
+ KEYMAP(KC_ESC, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_BSPC, \
+ KC_TAB, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, \
+ KC_LCTL,KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_ENT, \
+ OSM(MOD_LSFT),KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_FN1, KC_RSFT,KC_FN0, \
+ KC_LGUI,KC_FN3, KC_FN2, KC_FN4 ,KC_RGUI),
+
+ /* Layer 2: Dvorak Layer
+ * ,-----------------------------------------------------------------------------------------.
+ * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | [ | ] | ` | BSp |
+ * |-----------------------------------------------------------------------------------------|
+ * | Tab | ' | , | . | P | Y | F | G | C | R | L | / | = | \ |
+ * |-----------------------------------------------------------------------------------------|
+ * | Control | A | O | E | U | I | D | H | T | N | S | - | Enter |
+ * |-----------------------------------------------------------------------------------------|
+ * | Shift | ; | Q | J | K | X | B | M | W | V | Z | Shift | Fn0 |
+ * `-----------------------------------------------------------------------------------------'
+ * |LAlt | LGui | SpaceFN | RGui |RAlt |
+ * `-----------------------------------------------------------------'
+ */
+ [DVORAK] =
+ KEYMAP(KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC,KC_RBRC,KC_GRV, KC_BSPC, \
+ KC_TAB, KC_QUOT,KC_COMM,KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH,KC_EQL, KC_BSLS, \
+ KC_LCTL,KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS,KC_ENT, \
+ KC_LSFT,KC_SCLN,KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT,KC_FN0, \
+ KC_LALT,KC_LGUI, KC_FN2, KC_RGUI,KC_RALT),
+
+ /* Layer 3: Mouse layer
+ * ,-----------------------------------------------------------------------------------------.
+ * | Esc | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | | |
+ * |-----------------------------------------------------------------------------------------|
+ * | | | | | | | MwL | MwD | MwU | MwR | | | | |
+ * |-----------------------------------------------------------------------------------------|
+ * | | | | | | | McL | McD | McU | McR | | | |
+ * |-----------------------------------------------------------------------------------------|
+ * | | | | | | | Mb1 | Mb2 | Mb3 | | | | Fn0 |
+ * `-----------------------------------------------------------------------------------------'
+ * | | | Mb1 | | |
+ * `-----------------------------------------------------------------'
+ */
+ [MOUSE] =
+ KEYMAP(KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_TRNS, \
+ KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_WH_L,KC_WH_D,KC_WH_U,KC_WH_R,KC_NO, KC_NO, KC_NO, KC_NO, \
+ KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MS_L,KC_MS_D,KC_MS_U,KC_MS_R,KC_NO, KC_NO, KC_TRNS, \
+ KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_BTN1,KC_BTN2,KC_BTN3,KC_NO, KC_NO, KC_TRNS,KC_FN0, \
+ KC_TRNS,KC_TRNS, KC_BTN1, KC_TRNS,KC_TRNS),
+
+ /* Layer 4: Tenkey layer
+ * ,-----------------------------------------------------------------------------------------.
+ * | Esc | | | | | | | | | | / | * | - | | BSp |
+ * |-----------------------------------------------------------------------------------------|
+ * | | | | | | | | | | 7 | 8 | 9 | + | |
+ * |-----------------------------------------------------------------------------------------|
+ * | | | | | | | | | | 4 | 5 | 6 | Enter |
+ * |-----------------------------------------------------------------------------------------|
+ * | | | | | | | | | 1 | 2 | 3 | + | Fn0 |
+ * `-----------------------------------------------------------------------------------------'
+ * | | | SpaceFN | 0 | . |
+ * `-----------------------------------------------------------------'
+ */
+ [TENKEY] =
+ KEYMAP(KC_ESC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PSLS,KC_PAST,KC_PMNS,KC_NO, KC_BSPC, \
+ KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_KP_7,KC_KP_8,KC_KP_9,KC_PPLS,KC_NO, \
+ KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_KP_4,KC_KP_5,KC_KP_6,KC_PENT, \
+ KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_KP_1,KC_KP_2,KC_KP_3,KC_PPLS,KC_FN0, \
+ KC_TRNS,KC_TRNS, KC_FN2, KC_KP_0,KC_PDOT),
+
+ /* Layer 5: HHKB mode (HHKB Fn)
+ * ,-----------------------------------------------------------------------------------------.
+ * | Pwr | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del |
+ * |-----------------------------------------------------------------------------------------|
+ * | Caps | Fn5 | Fn6 | Fn7 | Fn8 | Fn9 | | | Psc | Slk | Pus | Up | | BSp |
+ * |-----------------------------------------------------------------------------------------|
+ * | | VoD | VoU | Mut | | | * | / | Hom | PgU | Lef | Rig | Enter |
+ * |-----------------------------------------------------------------------------------------|
+ * | | | | | | | + | - | End | PgD | Dow | | |
+ * `-----------------------------------------------------------------------------------------'
+ * | | | | | |
+ * `-----------------------------------------------------------------'
+ */
+ [HHKB] =
+ KEYMAP(KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \
+ KC_CAPS,KC_FN5, KC_FN6, KC_FN7, KC_FN8, KC_FN9, KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_UP, KC_TRNS,KC_BSPC, \
+ KC_TRNS,KC_VOLD,KC_VOLU,KC_MUTE,KC_TRNS,KC_TRNS,KC_PAST,KC_PSLS,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT,KC_PENT, \
+ KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PPLS,KC_PMNS,KC_END, KC_PGDN,KC_DOWN,KC_TRNS,KC_TRNS, \
+ KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS),
+
+ /* Layer 6: SpaceFN
+ * ,-----------------------------------------------------------------------------------------.
+ * | ` | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | | Del |
+ * |-----------------------------------------------------------------------------------------|
+ * | | End | Up | Hom | | | | Hom | Up | End | Psc | Slk | Pau | Ins |
+ * |-----------------------------------------------------------------------------------------|
+ * | | Lef | Dow | Rig | PgU | | PgU | Lef | Dow | Rig | | | |
+ * |-----------------------------------------------------------------------------------------|
+ * | | | | PgD | | Spc | PgD | ` | ~ | | | | |
+ * `-----------------------------------------------------------------------------------------'
+ * | | | | | |
+ * `-----------------------------------------------------------------'
+ */
+ [SPACE_FN] =
+ KEYMAP(KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_DEL, \
+ KC_TRNS,KC_END, KC_UP, KC_HOME,KC_NO, KC_NO, KC_NO, KC_HOME,KC_UP, KC_END, KC_PSCR,KC_SLCK,KC_PAUS,KC_INS, \
+ KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_PGUP,KC_NO, KC_PGUP,KC_LEFT,KC_DOWN,KC_RGHT,KC_NO, KC_NO, KC_TRNS, \
+ KC_TRNS,KC_NO, KC_NO, KC_PGDN,KC_NO, KC_SPC, KC_PGDN,KC_GRV, KC_TILD,KC_NO, KC_NO, KC_TRNS,KC_NO, \
+ KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS),
+};
+
+/*
+ * user defined action function
+ */
+enum function_id {
+ PSEUDO_US_FUNCTION,
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+ switch (id) {
+ case PSEUDO_US_FUNCTION:
+ action_pseudo_lut(record, BASE, keymap_jis2us);
+ break;
+ }
+}
+
+/*
+ * Fn action definition
+ */
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_LAYER_MOMENTARY(HHKB),
+ [1] = ACTION_FUNCTION(PSEUDO_US_FUNCTION),
+ [2] = ACTION_LAYER_TAP_KEY(SPACE_FN, KC_SPACE),
+ [3] = ACTION_MODS_TAP_KEY(MOD_LALT, KC_MHEN),
+ [4] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_KANA),
+ [5] = ACTION_DEFAULT_LAYER_SET(BASE),
+ [6] = ACTION_DEFAULT_LAYER_SET(PSEUDO_US),
+ [7] = ACTION_DEFAULT_LAYER_SET(MOUSE),
+ [8] = ACTION_DEFAULT_LAYER_SET(TENKEY),
+ [9] = ACTION_DEFAULT_LAYER_SET(DVORAK),
+};
diff --git a/keyboards/hhkb/keymaps/shela/keymap_jis2us.h b/keyboards/hhkb/keymaps/shela/keymap_jis2us.h
new file mode 100644
index 0000000000..cf2bd4f0e8
--- /dev/null
+++ b/keyboards/hhkb/keymaps/shela/keymap_jis2us.h
@@ -0,0 +1,32 @@
+#ifndef KEYMAP_JIS2US_H
+#define KEYMAP_JIS2US_H
+
+/* keymap for convert from JIS to US */
+const uint16_t PROGMEM keymap_jis2us[][2] = {
+ [KC_A ... KC_CAPS] = { 0x00, 0x00 }, /* default value */
+
+ [KC_1] = { KC_1, KC_EXLM }, /* 1 and ! -> 1 and ! */
+ [KC_2] = { KC_2, KC_LBRC }, /* 2 and " -> 2 and @ */
+ [KC_3] = { KC_3, KC_HASH }, /* 3 and # -> 3 and # */
+ [KC_4] = { KC_4, KC_DLR }, /* 4 and $ -> 4 and $ */
+ [KC_5] = { KC_5, KC_PERC }, /* 5 and % -> 5 and % */
+ [KC_6] = { KC_6, KC_EQL }, /* 6 and & -> 6 and ^ */
+ [KC_7] = { KC_7, KC_CIRC }, /* 7 and ' -> 7 and & */
+ [KC_8] = { KC_8, KC_DQT }, /* 8 and ( -> 8 and * */
+ [KC_9] = { KC_9, KC_ASTR }, /* 9 and ) -> 9 and ( */
+ [KC_0] = { KC_0, KC_LPRN }, /* 0 and (no assign) -> 0 and ) */
+ [KC_MINS] = { KC_MINS, S(KC_RO) }, /* - and = -> - and _ */
+ [KC_EQL] = { KC_UNDS, KC_COLN }, /* ^ and ~ -> = and + */
+ [KC_LBRC] = { KC_RBRC, KC_RCBR }, /* @ and ` -> [ and { */
+ [KC_RBRC] = { KC_BSLS, KC_PIPE }, /* [ and { -> ] and } */
+ [KC_BSLS] = { KC_JYEN, S(KC_JYEN) }, /* ] and } -> / and | */
+ [KC_NUHS] = { KC_NUHS, S(KC_NUHS) }, /* (no assign) */
+ [KC_SCLN] = { KC_SCLN, KC_QUOT }, /* ; and + -> ; and : */
+ [KC_QUOT] = { KC_AMPR, KC_AT }, /* : and * -> ' and " */
+ [KC_GRV] = { KC_LCBR, KC_PLUS }, /* (no assign) -> ` and ~ */
+ [KC_COMM] = { KC_COMM, KC_LT }, /* , and < -> , and < */
+ [KC_DOT] = { KC_DOT, KC_GT }, /* . and > -> . and > */
+ [KC_SLSH] = { KC_SLSH, KC_QUES }, /* / and ? -> / and ? */
+};
+
+#endif
diff --git a/keyboards/hhkb/keymaps/shela/readme.md b/keyboards/hhkb/keymaps/shela/readme.md
new file mode 100644
index 0000000000..5a06a83632
--- /dev/null
+++ b/keyboards/hhkb/keymaps/shela/readme.md
@@ -0,0 +1,14 @@
+# Shela's HHKB Layout
+
+Layer 0: US Layout
+Layer 1: Pseudo US Layout
+Layer 2: Dvorak Layout
+Layer 3: Mouse
+Layer 4: Tenkey
+Layer 5: HHKB Fn Key
+Layer 6: SpaceFN
+
+## Pseudo US Layout
+
+On japanese Windows, HHKB Professional 2 US layout model recognized wrongly as JIS layout without changing OS settings.
+But, you can use HHKB like a US layout keyboard as it is.
diff --git a/keyboards/hhkb/readme.md b/keyboards/hhkb/readme.md
index 39d49b32a1..367c0a08f7 100644
--- a/keyboards/hhkb/readme.md
+++ b/keyboards/hhkb/readme.md
@@ -168,13 +168,15 @@ Download or clone the whole firmware and navigate to the keyboards/planck folder
Depending on which keymap you would like to use, you will have to compile slightly differently.
### Default
-To build with the default keymap, simply run `make`.
+To build with the default keymap, simply run `make default`.
### Other Keymaps
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a file in the keymaps folder named `<name>.c` and see keymap document (you can find in top readme.md) and existent keymap files.
-To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
+To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
+
```
-$ make KEYMAP=[default|jack|<name>]
+$ make [default|jack|<name>]
```
+
Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
diff --git a/keyboards/hhkb/rules.mk b/keyboards/hhkb/rules.mk
new file mode 100644
index 0000000000..b43b5e23f1
--- /dev/null
+++ b/keyboards/hhkb/rules.mk
@@ -0,0 +1,84 @@
+
+
+# project specific files
+SRC = matrix.c
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+#OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# as per original hasu settings
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes # Console for debug(+400)
+COMMAND_ENABLE ?= yes # Commands for debug and configuration
+CUSTOM_MATRIX ?= yes # Custom matrix file for the HHKB
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
+# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
+# MIDI_ENABLE ?= YES # MIDI controls
+# UNICODE_ENABLE ?= YES # Unicode
+# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
+
+ifneq (, $(findstring yes, $(HHKB_JP)))
+ OPT_DEFS += -DHHKB_JP
+endif
+
+debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION
+debug-on: all
+
+debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT
+debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS))
+debug-off: all