summaryrefslogtreecommitdiff
path: root/keyboards/chibios_test/stm32_f103_onekey/rules.mk
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/chibios_test/stm32_f103_onekey/rules.mk')
-rw-r--r--keyboards/chibios_test/stm32_f103_onekey/rules.mk52
1 files changed, 52 insertions, 0 deletions
diff --git a/keyboards/chibios_test/stm32_f103_onekey/rules.mk b/keyboards/chibios_test/stm32_f103_onekey/rules.mk
new file mode 100644
index 0000000000..307ca5b198
--- /dev/null
+++ b/keyboards/chibios_test/stm32_f103_onekey/rules.mk
@@ -0,0 +1,52 @@
+# project specific files
+SRC = matrix.c \
+ led.c
+
+# GENERIC STM32F103C8T6 board - stm32duino bootloader
+OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
+MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
+BOARD = GENERIC_STM32_F103
+
+# GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD)
+# OPT_DEFS =
+# MCU_LDSCRIPT = STM32F103x8
+# BOARD = GENERIC_STM32_F103
+
+# MAPLE MINI
+# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000
+# MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader
+# BOARD = MAPLEMINI_STM32_F103
+
+## chip/board settings
+# the next two should match the directories in
+# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F1xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+# or <this_dir>/ld/
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f1xx
+# it should exist either in <chibios>/os/hal/boards/
+# or <this_dir>/boards
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU = cortex-m3
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+
+ifndef QUANTUM_DIR
+ include ../../../Makefile
+endif