diff options
Diffstat (limited to 'keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h')
| -rw-r--r-- | keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h | 109 |
1 files changed, 109 insertions, 0 deletions
diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h new file mode 100644 index 0000000000..4633db2fc6 --- /dev/null +++ b/keyboards/bastardkb/charybdis/3x5/keymaps/drashna/config.h @@ -0,0 +1,109 @@ +/* + +Copyright 2021 Quentin LEBASTARD <qlebastard@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#undef PRODUCT +#define PRODUCT Charybdis Nano (Blackpill) + +#undef MATRIX_ROW_PINS +#define MATRIX_ROW_PINS \ + { B12, B13, B14, B15 } +#undef MATRIX_COL_PINS +#define MATRIX_COL_PINS \ + { A15, B3, B4, B5, B6 } + + +#undef MATRIX_ROW_PINS_RIGHT +#define MATRIX_ROW_PINS_RIGHT \ + { B12, B13, B14, B15 } +#undef MATRIX_COL_PINS_RIGHT +#define MATRIX_COL_PINS_RIGHT \ + { A15, B3, B4, B5, B6 } + +#define USB_VBUS_PIN B10 +#define SPLIT_HAND_PIN C14 // high = left, low = right + +// WS2812 RGB LED strip input and number of LEDs +#undef RGB_DI_PIN +#define RGB_DI_PIN A1 +#undef RGB_MATRIX_MAXIMUM_BRIGHTNESS +#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 +#define WS2812_PWM_DRIVER PWMD2 // default: PWMD2 +#define WS2812_PWM_CHANNEL 2 // default: 2 +#define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 +#define WS2812_EXTERNAL_PULLUP +//#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy). +#define WS2812_DMA_STREAM STM32_DMA1_STREAM7 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +#define WS2812_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +#define WS2812_PWM_TARGET_PERIOD 800000 + +#define DEBUG_LED_PIN C13 + +/* Audio config */ +#define AUDIO_PIN B1 +#define AUDIO_PWM_DRIVER PWMD3 +#define AUDIO_PWM_CHANNEL 4 +#define AUDIO_PWM_PAL_MODE 2 +#define AUDIO_STATE_TIMER GPTD4 + +/* serial.c configuration for split keyboard */ +#undef SOFT_SERIAL_PIN +#define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode. +#define SERIAL_USART_TX_PIN A2 +#define SERIAL_USART_RX_PIN A3 +#define SERIAL_USART_DRIVER SD2 +#define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 +#define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 +#define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100 +// #define SERIAL_USART_PIN_SWAP // swap RX and TX pins on master +// To use the highest possible baudrate (3.75Mbit/s) uncomment the following +// line, this can result in dropped communications so lower the speed if there +// are many timeouts. +// #define SERIAL_USART_SPEED (STM32_PCLK2 >> 4) + +#define CRC8_USE_TABLE +#define CRC8_OPTIMIZE_SPEED + +/* spi config for eeprom and pmw3360 sensor */ +#define SPI_DRIVER SPID1 +#define SPI_SCK_PIN A5 +#define SPI_SCK_PAL_MODE 5 +#define SPI_MOSI_PIN A7 +#define SPI_MOSI_PAL_MODE 5 +#define SPI_MISO_PIN A6 +#define SPI_MISO_PAL_MODE 5 + +/* eeprom config */ +#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4 +#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 64 +// #define EXTERNAL_EEPROM_BYTE_COUNT 8196 +// #define EXTERNAL_EEPROM_PAGE_SIZE 32 +// #define EXTERNAL_EEPROM_ADDRESS_SIZE 2 + +/* pmw3360 config */ +#undef PMW3360_CS_PIN +#define PMW3360_CS_PIN B0 +#define PMW3360_SPI_MODE 3 +#define PMW3360_SPI_DIVISOR 64 + + +# define CHARYBDIS_MINIMUM_DEFAULT_DPI 1200 +# define CHARYBDIS_DEFAULT_DPI_CONFIG_STEP 400 +# define CHARYBDIS_MINIMUM_SNIPING_DPI 200 +# define CHARYBDIS_SNIPING_DPI_CONFIG_STEP 100 |