summaryrefslogtreecommitdiff
path: root/drivers/haptic/DRV2605L.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/haptic/DRV2605L.c')
-rw-r--r--drivers/haptic/DRV2605L.c129
1 files changed, 129 insertions, 0 deletions
diff --git a/drivers/haptic/DRV2605L.c b/drivers/haptic/DRV2605L.c
new file mode 100644
index 0000000000..97ca292b9b
--- /dev/null
+++ b/drivers/haptic/DRV2605L.c
@@ -0,0 +1,129 @@
+/* Copyright 2018 ishtob
+ * Driver for DRV2605L written for QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "DRV2605L.h"
+#include "print.h"
+#include <stdlib.h>
+#include <stdio.h>
+#include <math.h>
+
+
+uint8_t DRV2605L_transfer_buffer[20];
+uint8_t DRV2605L_tx_register[0];
+uint8_t DRV2605L_read_buffer[0];
+uint8_t DRV2605L_read_register;
+
+
+void DRV_write(uint8_t drv_register, uint8_t settings) {
+ DRV2605L_transfer_buffer[0] = drv_register;
+ DRV2605L_transfer_buffer[1] = settings;
+ i2c_transmit(DRV2605L_BASE_ADDRESS << 1, DRV2605L_transfer_buffer, 2, 100);
+}
+
+uint8_t DRV_read(uint8_t regaddress) {
+ DRV2605L_tx_register[0] = regaddress;
+ if (MSG_OK != i2c_transmit_receive(DRV2605L_BASE_ADDRESS << 1,
+ DRV2605L_tx_register, 1,
+ DRV2605L_read_buffer, 1
+)){
+ printf("err reading reg \n");
+ }
+ DRV2605L_read_register = (uint8_t)DRV2605L_read_buffer[0];
+return DRV2605L_read_register;
+}
+
+void DRV_init(void)
+{
+ i2c_init();
+ i2c_start(DRV2605L_BASE_ADDRESS);
+
+ /* 0x07 sets DRV2605 into calibration mode */
+ DRV_write(DRV_MODE,0x07);
+
+// DRV_write(DRV_FEEDBACK_CTRL,0xB6);
+
+ #if FB_ERM_LRA == 0
+ /* ERM settings */
+ DRV_write(DRV_RATED_VOLT, (RATED_VOLTAGE/21.33)*1000);
+ #if ERM_OPEN_LOOP == 0
+ DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (((V_PEAK*(DRIVE_TIME+BLANKING_TIME+IDISS_TIME))/0.02133)/(DRIVE_TIME-0.0003)));
+ #elif ERM_OPEN_LOOP == 1
+ DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (V_PEAK/0.02196));
+ #endif
+ #elif FB_ERM_LRA == 1
+ DRV_write(DRV_RATED_VOLT, ((V_RMS * sqrt(1 - ((4 * ((150+(SAMPLE_TIME*50))*0.000001)) + 0.0003)* F_LRA)/0.02071)));
+ #if LRA_OPEN_LOOP == 0
+ DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, ((V_PEAK/sqrt(1-(F_LRA*0.0008))/0.02133)));
+ #elif LRA_OPEN_LOOP == 1
+ DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (V_PEAK/0.02196));
+ #endif
+ #endif
+
+ DRVREG_FBR FB_SET;
+ FB_SET.Bits.ERM_LRA = FB_ERM_LRA;
+ FB_SET.Bits.BRAKE_FACTOR = FB_BRAKEFACTOR;
+ FB_SET.Bits.LOOP_GAIN =FB_LOOPGAIN;
+ FB_SET.Bits.BEMF_GAIN = 0; /* auto-calibration populates this field*/
+ DRV_write(DRV_FEEDBACK_CTRL, (uint8_t) FB_SET.Byte);
+ DRVREG_CTRL1 C1_SET;
+ C1_SET.Bits.C1_DRIVE_TIME = DRIVE_TIME;
+ C1_SET.Bits.C1_AC_COUPLE = AC_COUPLE;
+ C1_SET.Bits.C1_STARTUP_BOOST = STARTUP_BOOST;
+ DRV_write(DRV_CTRL_1, (uint8_t) C1_SET.Byte);
+ DRVREG_CTRL2 C2_SET;
+ C2_SET.Bits.C2_BIDIR_INPUT = BIDIR_INPUT;
+ C2_SET.Bits.C2_BRAKE_STAB = BRAKE_STAB;
+ C2_SET.Bits.C2_SAMPLE_TIME = SAMPLE_TIME;
+ C2_SET.Bits.C2_BLANKING_TIME = BLANKING_TIME;
+ C2_SET.Bits.C2_IDISS_TIME = IDISS_TIME;
+ DRV_write(DRV_CTRL_2, (uint8_t) C2_SET.Byte);
+ DRVREG_CTRL3 C3_SET;
+ C3_SET.Bits.C3_LRA_OPEN_LOOP = LRA_OPEN_LOOP;
+ C3_SET.Bits.C3_N_PWM_ANALOG = N_PWM_ANALOG;
+ C3_SET.Bits.C3_LRA_DRIVE_MODE = LRA_DRIVE_MODE;
+ C3_SET.Bits.C3_DATA_FORMAT_RTO = DATA_FORMAT_RTO;
+ C3_SET.Bits.C3_SUPPLY_COMP_DIS = SUPPLY_COMP_DIS;
+ C3_SET.Bits.C3_ERM_OPEN_LOOP = ERM_OPEN_LOOP;
+ C3_SET.Bits.C3_NG_THRESH = NG_THRESH;
+ DRV_write(DRV_CTRL_3, (uint8_t) C3_SET.Byte);
+ DRVREG_CTRL4 C4_SET;
+ C4_SET.Bits.C4_ZC_DET_TIME = ZC_DET_TIME;
+ C4_SET.Bits.C4_AUTO_CAL_TIME = AUTO_CAL_TIME;
+ DRV_write(DRV_CTRL_4, (uint8_t) C4_SET.Byte);
+ DRV_write(DRV_LIB_SELECTION,LIB_SELECTION);
+ //start autocalibration
+ DRV_write(DRV_GO, 0x01);
+
+ /* 0x00 sets DRV2605 out of standby and to use internal trigger
+ * 0x01 sets DRV2605 out of standby and to use external trigger */
+ DRV_write(DRV_MODE,0x00);
+
+ /* 0x06: LRA library */
+ DRV_write(DRV_WAVEFORM_SEQ_1, 0x01);
+
+ /* 0xB9: LRA, 4x brake factor, medium gain, 7.5x back EMF
+ * 0x39: ERM, 4x brake factor, medium gain, 1.365x back EMF */
+
+ /* TODO: setup auto-calibration as part of initiation */
+
+}
+
+void DRV_pulse(uint8_t sequence)
+{
+ DRV_write(DRV_GO, 0x00);
+ DRV_write(DRV_WAVEFORM_SEQ_1, sequence);
+ DRV_write(DRV_GO, 0x01);
+} \ No newline at end of file