summaryrefslogtreecommitdiff
path: root/drivers/arm/i2c_master.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/arm/i2c_master.c')
-rw-r--r--drivers/arm/i2c_master.c13
1 files changed, 7 insertions, 6 deletions
diff --git a/drivers/arm/i2c_master.c b/drivers/arm/i2c_master.c
index 2fdd9f65e1..2a7badd351 100644
--- a/drivers/arm/i2c_master.c
+++ b/drivers/arm/i2c_master.c
@@ -15,12 +15,14 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-/* This library follows the convention of the AVR i2c_master library.
+/* This library is only valid for STM32 processors.
+ * This library follows the convention of the AVR i2c_master library.
* As a result addresses are expected to be already shifted (addr << 1).
* I2CD1 is the default driver which corresponds to pins B6 and B7. This
* can be changed.
* Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
- * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file.
+ * STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. Pins B6 and B7 are used
+ * but using any other I2C pins should be trivial.
*/
#include "i2c_master.h"
@@ -41,7 +43,7 @@ static const I2CConfig i2cconfig = {
void i2c_init(void)
{
- palSetGroupMode(GPIOB,6,7, PAL_MODE_INPUT); // Try releasing special pins for a short time
+ palSetGroupMode(GPIOB, GPIOB_PIN6 | GPIOB_PIN7, 0, PAL_MODE_INPUT); // Try releasing special pins for a short time
chThdSleepMilliseconds(10);
palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
@@ -82,12 +84,12 @@ uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t l
{
complete_packet[i+1] = data[i];
}
- complete_packet[0] = regaddr
+ complete_packet[0] = regaddr;
return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout));
}
-uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
+uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
{
i2c_address = devaddr;
i2cStart(&I2C_DRIVER, &i2cconfig);
@@ -97,7 +99,6 @@ uint8_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t le
// This is usually not needed. It releases the driver to allow pins to become GPIO again.
uint8_t i2c_stop(uint16_t timeout)
{
- i2c_address = address;
i2cStop(&I2C_DRIVER);
return 0;
}