summaryrefslogtreecommitdiff
path: root/converter/serialmouse_usb/config.h
diff options
context:
space:
mode:
Diffstat (limited to 'converter/serialmouse_usb/config.h')
-rw-r--r--converter/serialmouse_usb/config.h119
1 files changed, 0 insertions, 119 deletions
diff --git a/converter/serialmouse_usb/config.h b/converter/serialmouse_usb/config.h
deleted file mode 100644
index b257d997cf..0000000000
--- a/converter/serialmouse_usb/config.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include <avr/interrupt.h>
-
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x2222
-#define DEVICE_VER 0x0001
-#define MANUFACTURER t.m.k.
-#define PRODUCT serial mouse converter
-#define DESCRIPTION convert serial mouse into USB
-
-
-/* matrix size */
-#define MATRIX_ROWS 0
-#define MATRIX_COLS 0
-
-
-/* key combination for command */
-#define IS_COMMAND() false
-
-
-
-#ifdef SERIAL_MOUSE_MICROSOFT
- /*
- * Serial(USART) configuration (for Microsoft serial mice)
- * asynchronous, positive logic, 1200baud, bit order: LSB first
- * 1-start bit, 7-data bit, no parity, 1-stop bit
- */
- #define SERIAL_UART_BAUD 1200
- #define SERIAL_UART_DATA UDR1
- #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
- #define SERIAL_UART_RXD_VECT USART1_RX_vect
- #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
- #define SERIAL_UART_INIT() do { \
- UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
- UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
- UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
- UCSR1C = (1<<UCSZ11) | (0<<UCSZ10); /* no parity, 1 stop bit, 7-bit characters */ \
- sei(); \
- } while(0)
-
- // for Microsoft mouse protocol
- /* Serial(USART) configuration
- * asynchronous, negative logic, 1200baud, no flow control
- * 1-start bit, 7-data bit, non parity, 1-stop bit
- */
- #define SERIAL_SOFT_BAUD 1200
- #define SERIAL_SOFT_DATA_7BIT
- #define SERIAL_SOFT_PARITY_NONE
- #define SERIAL_SOFT_BIT_ORDER_LSB
- #define SERIAL_SOFT_LOGIC_NEGATIVE
- /* RXD Port */
- #define SERIAL_SOFT_RXD_DDR DDRD
- #define SERIAL_SOFT_RXD_PORT PORTD
- #define SERIAL_SOFT_RXD_PIN PIND
- #define SERIAL_SOFT_RXD_BIT 2
- #define SERIAL_SOFT_RXD_VECT INT2_vect
- /* RXD Interupt */
- #define SERIAL_SOFT_RXD_INIT() do { \
- /* pin configuration: input with pull-up */ \
- SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \
- SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \
- /* enable interrupt: INT2(rising edge) */ \
- EICRA |= ((1<<ISC21)|(1<<ISC20)); \
- EIMSK |= (1<<INT2); \
- sei(); \
- } while (0)
- #define SERIAL_SOFT_RXD_INT_ENTER()
- #define SERIAL_SOFT_RXD_INT_EXIT() do { \
- /* clear interrupt flag */ \
- EIFR = (1<<INTF2); \
- } while (0)
- #define SERIAL_SOFT_RXD_READ() (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT))
- /* TXD Port */
- #define SERIAL_SOFT_TXD_HI()
- #define SERIAL_SOFT_TXD_LO()
- #define SERIAL_SOFT_TXD_INIT()
-#elif defined(SERIAL_MOUSE_MOUSESYSTEMS)
- /*
- * Serial(USART) configuration (for Mousesystems serial mice)
- * asynchronous, positive logic, 1200baud, bit order: LSB first
- * 1-start bit, 8-data bit, no parity, 1-stop bit
- */
- #define SERIAL_UART_BAUD 1200
- #define SERIAL_UART_DATA UDR1
- #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
- #define SERIAL_UART_RXD_VECT USART1_RX_vect
- #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
- #define SERIAL_UART_INIT() do { \
- UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
- UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
- UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
- UCSR1C = (1<<UCSZ11) | (1<<UCSZ10); /* no parity, 1 stop bit, 8-bit characters */ \
- sei(); \
- } while(0)
-#endif
-
-
-
-
-#endif