summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--keyboards/lfkeyboards/lfk78/rules.mk12
-rw-r--r--keyboards/lfkeyboards/lfk87/rules.mk12
-rw-r--r--keyboards/lfkeyboards/mini1800/rules.mk36
-rw-r--r--keyboards/lfkeyboards/smk65/rules.mk12
-rw-r--r--keyboards/naked48/rules.mk1
-rw-r--r--keyboards/sixkeyboard/rules.mk36
-rw-r--r--keyboards/xd004/v1/rules.mk37
-rw-r--r--quantum/mcu_selection.mk2
8 files changed, 1 insertions, 147 deletions
diff --git a/keyboards/lfkeyboards/lfk78/rules.mk b/keyboards/lfkeyboards/lfk78/rules.mk
index cc314c97a2..b9cdf23076 100644
--- a/keyboards/lfkeyboards/lfk78/rules.mk
+++ b/keyboards/lfkeyboards/lfk78/rules.mk
@@ -21,18 +21,6 @@ OPT_DEFS += -DLFK_REV_STRING=\"Rev$(LFK_REV)\"
# Extra source files for IS3731 lighting
SRC = TWIlib.c issi.c lighting.c
-# Processor frequency.
-F_CPU = 16000000
-
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
diff --git a/keyboards/lfkeyboards/lfk87/rules.mk b/keyboards/lfkeyboards/lfk87/rules.mk
index c10f473065..bc96e3520e 100644
--- a/keyboards/lfkeyboards/lfk87/rules.mk
+++ b/keyboards/lfkeyboards/lfk87/rules.mk
@@ -18,18 +18,6 @@ OPT_DEFS += -DLFK_TKL_REV_$(LFK_REV)
# Extra source files for IS3731 lighting
SRC = TWIlib.c issi.c lighting.c
-# Processor frequency.
-F_CPU = 16000000
-
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
LAYOUTS = tkl_ansi tkl_iso
# Build Options
diff --git a/keyboards/lfkeyboards/mini1800/rules.mk b/keyboards/lfkeyboards/mini1800/rules.mk
index a1e52aae94..a06225491f 100644
--- a/keyboards/lfkeyboards/mini1800/rules.mk
+++ b/keyboards/lfkeyboards/mini1800/rules.mk
@@ -16,42 +16,6 @@ else
endif
OPT_DEFS += -DLFK_TKL_REV_$(LFK_REV)
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
# Extra source files for IS3731 lighting
SRC = TWIlib.c issi.c lighting.c
diff --git a/keyboards/lfkeyboards/smk65/rules.mk b/keyboards/lfkeyboards/smk65/rules.mk
index b7f94154a4..5834cf5c3a 100644
--- a/keyboards/lfkeyboards/smk65/rules.mk
+++ b/keyboards/lfkeyboards/smk65/rules.mk
@@ -3,15 +3,3 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Extra source files for IS3731 lighting
SRC = TWIlib.c issi.c lighting.c
-
-# Processor frequency.
-F_CPU = 16000000
-
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
diff --git a/keyboards/naked48/rules.mk b/keyboards/naked48/rules.mk
index 02a7d9ab2a..53e2dfc21c 100644
--- a/keyboards/naked48/rules.mk
+++ b/keyboards/naked48/rules.mk
@@ -3,7 +3,6 @@ QUANTUM_LIB_SRC += serial.c
# SRC += ssd1306.c
# MCU name
-#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
diff --git a/keyboards/sixkeyboard/rules.mk b/keyboards/sixkeyboard/rules.mk
index 52213f341a..b718c7e65f 100644
--- a/keyboards/sixkeyboard/rules.mk
+++ b/keyboards/sixkeyboard/rules.mk
@@ -3,42 +3,6 @@ SRC = matrix.c
# MCU name
MCU = atmega16u2
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
# Boot Section Size in *bytes*
# Teensy halfKay 512
diff --git a/keyboards/xd004/v1/rules.mk b/keyboards/xd004/v1/rules.mk
index c55d65c0f5..9cc03498a7 100644
--- a/keyboards/xd004/v1/rules.mk
+++ b/keyboards/xd004/v1/rules.mk
@@ -2,43 +2,6 @@
MCU = atmega16u2
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-# LUFA specific
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 2048
diff --git a/quantum/mcu_selection.mk b/quantum/mcu_selection.mk
index 2d62dcbf1e..1af0123e2b 100644
--- a/quantum/mcu_selection.mk
+++ b/quantum/mcu_selection.mk
@@ -36,7 +36,7 @@ ifneq ($(findstring STM32F303, $(MCU)),)
DFU_SUFFIX_ARGS = -p DF11 -v 0483
endif
-ifneq (,$(filter $(MCU),atmega32u2 atmega32u4 at90usb1286))
+ifneq (,$(filter $(MCU),atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb1286))
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to