summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--common.mk1
-rw-r--r--common_features.mk14
-rw-r--r--docs/config_options.md12
-rw-r--r--docs/getting_started_make_guide.md4
-rw-r--r--keyboards/lets_split/keymaps/that_canadian/config.h32
-rw-r--r--keyboards/lets_split/keymaps/that_canadian/keymap.c163
-rw-r--r--keyboards/lets_split_eh/README.md13
-rw-r--r--keyboards/lets_split_eh/config.h44
-rw-r--r--keyboards/lets_split_eh/eh/config.h47
-rw-r--r--keyboards/lets_split_eh/eh/eh.c14
-rw-r--r--keyboards/lets_split_eh/eh/eh.h27
-rw-r--r--keyboards/lets_split_eh/eh/rules.mk4
-rw-r--r--keyboards/lets_split_eh/keymaps/default/config.h26
-rw-r--r--keyboards/lets_split_eh/keymaps/default/keymap.c170
-rw-r--r--keyboards/lets_split_eh/keymaps/default/rules.mk3
-rw-r--r--keyboards/lets_split_eh/keymaps/that_canadian/config.h26
-rw-r--r--keyboards/lets_split_eh/keymaps/that_canadian/keymap.c170
-rw-r--r--keyboards/lets_split_eh/keymaps/that_canadian/rules.mk3
-rw-r--r--keyboards/lets_split_eh/lets_split_eh.c1
-rw-r--r--keyboards/lets_split_eh/lets_split_eh.h27
-rw-r--r--keyboards/lets_split_eh/rules.mk70
-rw-r--r--quantum/keymap_common.c22
-rw-r--r--quantum/quantum.c65
-rw-r--r--quantum/quantum.h6
-rw-r--r--quantum/rgblight.c2
-rw-r--r--quantum/rgblight.h4
-rw-r--r--quantum/split_common/eeprom-lefthand.eep2
-rw-r--r--quantum/split_common/eeprom-righthand.eep2
-rw-r--r--quantum/split_common/i2c.c187
-rw-r--r--quantum/split_common/i2c.h60
-rw-r--r--quantum/split_common/matrix.c510
-rw-r--r--quantum/split_common/serial.c228
-rw-r--r--quantum/split_common/serial.h26
-rw-r--r--quantum/split_common/split_flags.c5
-rw-r--r--quantum/split_common/split_flags.h20
-rw-r--r--quantum/split_common/split_util.c145
-rw-r--r--quantum/split_common/split_util.h23
37 files changed, 2176 insertions, 2 deletions
diff --git a/common.mk b/common.mk
index aea29a7a20..272d170e68 100644
--- a/common.mk
+++ b/common.mk
@@ -21,4 +21,5 @@ COMMON_VPATH += $(QUANTUM_PATH)/keymap_extras
COMMON_VPATH += $(QUANTUM_PATH)/audio
COMMON_VPATH += $(QUANTUM_PATH)/process_keycode
COMMON_VPATH += $(QUANTUM_PATH)/api
+COMMON_VPATH += $(QUANTUM_PATH)/split_common
COMMON_VPATH += $(DRIVER_PATH)
diff --git a/common_features.mk b/common_features.mk
index b12b6ae518..b78f04d2a8 100644
--- a/common_features.mk
+++ b/common_features.mk
@@ -210,5 +210,17 @@ QUANTUM_SRC:= \
$(QUANTUM_DIR)/process_keycode/process_leader.c
ifndef CUSTOM_MATRIX
- QUANTUM_SRC += $(QUANTUM_DIR)/matrix.c
+ ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
+ QUANTUM_SRC += $(QUANTUM_DIR)/split_common/matrix.c
+ else
+ QUANTUM_SRC += $(QUANTUM_DIR)/matrix.c
+ endif
+endif
+
+ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
+ OPT_DEFS += -DSPLIT_KEYBOARD
+ QUANTUM_SRC += $(QUANTUM_DIR)/split_common/split_flags.c \
+ $(QUANTUM_DIR)/split_common/split_util.c \
+ $(QUANTUM_DIR)/split_common/i2c.c \
+ $(QUANTUM_DIR)/split_common/serial.c
endif
diff --git a/docs/config_options.md b/docs/config_options.md
index 94233cadcf..d728a49c3e 100644
--- a/docs/config_options.md
+++ b/docs/config_options.md
@@ -179,6 +179,16 @@ If you define these options you will enable the associated feature, which may in
* `#define MOUSEKEY_MAX_SPEED 7`
* `#define MOUSEKEY_WHEEL_DELAY 0`
+## Split Keyboard Options
+
+Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk
+
+* `#define SPLIT_HAND_PIN B7`
+ * For using high/low pin to determine handedness, low = right hand, high = left hand. Replace 'B7' with the pin you are using. This is optional and you can still use the EEHANDS method or MASTER_LEFT / MASTER_RIGHT defines like the stock Let's Split uses.
+
+* `#define USE_I2C`
+ * For using I2C instead of Serial (defaults to serial)
+
# The `rules.mk` File
This is a [make](https://www.gnu.org/software/make/manual/make.html) file that is included by the top-level `Makefile`. It is used to set some information about the MCU that we will be compiling for as well as enabling and disabling certain features.
@@ -232,3 +242,5 @@ Use these to enable or disable building certain features. The more you have enab
* Unicode
* `BLUETOOTH_ENABLE`
* Enable Bluetooth with the Adafruit EZ-Key HID
+* `SPLIT_KEYBOARD`
+ * Enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
diff --git a/docs/getting_started_make_guide.md b/docs/getting_started_make_guide.md
index a57edcb984..e515411901 100644
--- a/docs/getting_started_make_guide.md
+++ b/docs/getting_started_make_guide.md
@@ -133,6 +133,10 @@ This consumes about 5390 bytes.
This enables [key lock](feature_key_lock.md). This consumes an additional 260 bytes.
+`SPLIT_KEYBOARD`
+
+This enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
+
## Customizing Makefile Options on a Per-Keymap Basis
If your keymap directory has a file called `rules.mk` any options you set in that file will take precedence over other `rules.mk` options for your particular keyboard.
diff --git a/keyboards/lets_split/keymaps/that_canadian/config.h b/keyboards/lets_split/keymaps/that_canadian/config.h
new file mode 100644
index 0000000000..586b6e8c87
--- /dev/null
+++ b/keyboards/lets_split/keymaps/that_canadian/config.h
@@ -0,0 +1,32 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define _MASTER_RIGHT
+// #define EE_HANDS
+
+#endif \ No newline at end of file
diff --git a/keyboards/lets_split/keymaps/that_canadian/keymap.c b/keyboards/lets_split/keymaps/that_canadian/keymap.c
new file mode 100644
index 0000000000..239a8d3bee
--- /dev/null
+++ b/keyboards/lets_split/keymaps/that_canadian/keymap.c
@@ -0,0 +1,163 @@
+#include QMK_KEYBOARD_H
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ LOWER,
+ RAISE,
+ ADJUST,
+ BACKLIT
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | RESET| Q | W | E | R | T | Y | U | I | O | P | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc | A | S | D | F | G | H | J | K | L | ; | " |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Backlt| Ctrl | GUI | Alt |Lower |Space |Space |Raise | Left | Down | Up |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT( \
+ RESET, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
+ KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
+ RGB_TOG, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
+ BACKLIT, KC_LCTL, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT( \
+ KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+ KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT( \
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \
+ KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \
+ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * | | Reset| | | | | | | | | | Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | | | | | | | | | | | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | | | | |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT( \
+ _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
+ _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
+)
+
+
+};
+
+void persistent_default_layer_set(uint16_t default_layer) {
+ eeconfig_update_default_layer(default_layer);
+ default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ #ifdef AUDIO_ENABLE
+ PLAY_SONG(tone_qwerty);
+ #endif
+ persistent_default_layer_set(1UL<<_QWERTY);
+ }
+ return false;
+ break;
+ case BACKLIT:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ #ifdef BACKLIGHT_ENABLE
+ backlight_step();
+ #endif
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ return false;
+ break;
+ case LOWER:
+ if (record->event.pressed) {
+ layer_on(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case RAISE:
+ if (record->event.pressed) {
+ layer_on(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case ADJUST:
+ if (record->event.pressed) {
+ layer_on(_ADJUST);
+ } else {
+ layer_off(_ADJUST);
+ }
+ return false;
+ break;
+ }
+ return true;
+} \ No newline at end of file
diff --git a/keyboards/lets_split_eh/README.md b/keyboards/lets_split_eh/README.md
new file mode 100644
index 0000000000..185e74dab0
--- /dev/null
+++ b/keyboards/lets_split_eh/README.md
@@ -0,0 +1,13 @@
+# Let's Split Eh?
+
+![Let's Split Eh?](https://i.imgur.com/VMQG4qw.jpg?1)
+
+This is a split 40% ortho board. It is the exact same footprint and the Let's Split keyboard by wootpatoot. This board has USB-C / RGB Underglow / and is all on-board. Meant as a drop-in replacement for the V2 Let's Split.
+
+Keyboard Maintainer: [Christopher Poole (That-Canadian)](https://github.com/That-Canadian)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make lets_split_eh/eh:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. \ No newline at end of file
diff --git a/keyboards/lets_split_eh/config.h b/keyboards/lets_split_eh/config.h
new file mode 100644
index 0000000000..b8fe95ea2b
--- /dev/null
+++ b/keyboards/lets_split_eh/config.h
@@ -0,0 +1,44 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0xE401
+#define DEVICE_VER 0x0E41
+#define MANUFACTURER That-Canadian
+#define PRODUCT Lets Split Eh?
+#define DESCRIPTION An on-board component Lets Split w/ USB-C
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 6
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#endif
diff --git a/keyboards/lets_split_eh/eh/config.h b/keyboards/lets_split_eh/eh/config.h
new file mode 100644
index 0000000000..5651ddd8b7
--- /dev/null
+++ b/keyboards/lets_split_eh/eh/config.h
@@ -0,0 +1,47 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef EH_CONFIG_H
+#define EH_CONFIG_H
+
+// To let configuration know this is of type EH, which will force I2C irregardless of user config
+#define EH
+
+#include "config_common.h"
+
+/* Let's Split EH? pin-out */
+#define MATRIX_ROW_PINS { B1, B3, D7, B4 }
+#define MATRIX_COL_PINS { F4, F5, C6, B6, B5, D5 }
+#define UNUSED_PINS
+
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN B2
+#define RGBLED_NUM 6 // Number of LEDs (each hand)
+
+/* Split Defines */
+#define SPLIT_HAND_PIN D3
+
+#endif
+
diff --git a/keyboards/lets_split_eh/eh/eh.c b/keyboards/lets_split_eh/eh/eh.c
new file mode 100644
index 0000000000..e748d3ae05
--- /dev/null
+++ b/keyboards/lets_split_eh/eh/eh.c
@@ -0,0 +1,14 @@
+#include "lets_split_eh.h"
+
+void matrix_init_kb(void) {
+
+ // JTAG disable for PORT F. write JTD bit twice within four cycles.
+ MCUCR |= (1<<JTD);
+ MCUCR |= (1<<JTD);
+
+ // Undo init of RX LED, we use that port currently
+ // DDRB &= ~(1<<0);
+
+ matrix_init_user();
+};
+
diff --git a/keyboards/lets_split_eh/eh/eh.h b/keyboards/lets_split_eh/eh/eh.h
new file mode 100644
index 0000000000..7dc84fe181
--- /dev/null
+++ b/keyboards/lets_split_eh/eh/eh.h
@@ -0,0 +1,27 @@
+#ifndef EH_H
+#define EH_H
+
+#include "lets_split_eh.h"
+
+#include "quantum.h"
+
+#define LAYOUT( \
+ L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+ L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+ L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+ L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
+ ) \
+ { \
+ { L00, L01, L02, L03, L04, L05 }, \
+ { L10, L11, L12, L13, L14, L15 }, \
+ { L20, L21, L22, L23, L24, L25 }, \
+ { L30, L31, L32, L33, L34, L35 }, \
+ { R00, R01, R02, R03, R04, R05 }, \
+ { R10, R11, R12, R13, R14, R15 }, \
+ { R20, R21, R22, R23, R24, R25 }, \
+ { R30, R31, R32, R33, R34, R35 } \
+ }
+
+#define LAYOUT_ortho_4x12 LAYOUT
+
+#endif
diff --git a/keyboards/lets_split_eh/eh/rules.mk b/keyboards/lets_split_eh/eh/rules.mk
new file mode 100644
index 0000000000..4bac58533e
--- /dev/null
+++ b/keyboards/lets_split_eh/eh/rules.mk
@@ -0,0 +1,4 @@
+BOOTLOADER = atmel-dfu
+
+BACKLIGHT_ENABLE = yes
+RGBLIGHT_ENABLE = yes \ No newline at end of file
diff --git a/keyboards/lets_split_eh/keymaps/default/config.h b/keyboards/lets_split_eh/keymaps/default/config.h
new file mode 100644
index 0000000000..a1df337bd9
--- /dev/null
+++ b/keyboards/lets_split_eh/keymaps/default/config.h
@@ -0,0 +1,26 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#endif \ No newline at end of file
diff --git a/keyboards/lets_split_eh/keymaps/default/keymap.c b/keyboards/lets_split_eh/keymaps/default/keymap.c
new file mode 100644
index 0000000000..8ef9735749
--- /dev/null
+++ b/keyboards/lets_split_eh/keymaps/default/keymap.c
@@ -0,0 +1,170 @@
+#include QMK_KEYBOARD_H
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+
+#define _LOWER 3
+#define _RAISE 4
+#define _FUNCTION 15
+#define _ADJUST 16
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ LOWER,
+ RAISE,
+ ADJUST
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Defines for task manager and such
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Func | A | S | D | F | G | H | J | K | L | ; | Enter|
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | N | M | , | . | / | ' |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | ` | GUI | Alt |Lower | Space |Raise | Left | Down | Up |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT( \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
+ MO(_FUNCTION), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \
+ OSM(MOD_LSFT), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT, \
+ KC_LCTL, KC_GRV, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } |Enter |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | F7 | F8 | F9 | F10 | F11 | F12 | | | Mute | | | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | |Lower | Bksp | Bksp |Raise | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT( \
+ KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______, \
+ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_MUTE, _______, KC_PIPE, \
+ _______, _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | | 4 | 5 | 6 | + | F5 | F6 | - | = | [ | ] |Enter |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |Enter | 7 | 8 | 9 | - | F11 | F12 |ISO # |ISO / | Mute | | \ |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | , | 0 | . |Lower | Bksp | Bksp |Raise | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT( \
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \
+ _______, KC_4, KC_5, KC_6, KC_PLUS, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______, \
+ KC_ENT, KC_7, KC_8, KC_9, KC_MINS, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_MUTE, _______, KC_BSLS, \
+ _______, KC_COMM, KC_0, KC_DOT, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |Taskmg| | | | | | | |RGBVAI|RGBSAI|RGBHUI|caltde|
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | | | | | | | |Qwerty|RGBVAD|RGBSAD|RGBHUD|RGBTOG|
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | | | | | | | | | | |BLSTEP|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | | | | | RESET|
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT( \
+ TSKMGR, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, RGB_SAI, RGB_HUI, CALTDEL, \
+ _______, _______, _______, _______, _______, _______, _______, QWERTY, RGB_VAD, RGB_SAD, RGB_HUD, RGB_TOG, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_STEP, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET \
+),
+
+/* Function
+ * ,-----------------------------------------------------------------------------------.
+ * | | | | | | | | | Up | | | |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | | | | | | | | Left | Down |Right | | |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Caps | | | | | | | | | | | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | | | | |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_FUNCTION] = LAYOUT( \
+ _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, \
+ KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
+)
+
+};
+
+void persistent_default_layer_set(uint16_t default_layer) {
+ eeconfig_update_default_layer(default_layer);
+ default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ persistent_default_layer_set(1UL<<_QWERTY);
+ }
+ return false;
+ break;
+ case LOWER:
+ if (record->event.pressed) {
+ layer_on(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case RAISE:
+ if (record->event.pressed) {
+ layer_on(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case ADJUST:
+ if (record->event.pressed) {
+ layer_on(_ADJUST);
+ } else {
+ layer_off(_ADJUST);
+ }
+ return false;
+ break;
+ }
+ return true;
+} \ No newline at end of file
diff --git a/keyboards/lets_split_eh/keymaps/default/rules.mk b/keyboards/lets_split_eh/keymaps/default/rules.mk
new file mode 100644
index 0000000000..457a3d01d4
--- /dev/null
+++ b/keyboards/lets_split_eh/keymaps/default/rules.mk
@@ -0,0 +1,3 @@
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
diff --git a/keyboards/lets_split_eh/keymaps/that_canadian/config.h b/keyboards/lets_split_eh/keymaps/that_canadian/config.h
new file mode 100644
index 0000000000..a1df337bd9
--- /dev/null
+++ b/keyboards/lets_split_eh/keymaps/that_canadian/config.h
@@ -0,0 +1,26 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+#endif \ No newline at end of file
diff --git a/keyboards/lets_split_eh/keymaps/that_canadian/keymap.c b/keyboards/lets_split_eh/keymaps/that_canadian/keymap.c
new file mode 100644
index 0000000000..8ef9735749
--- /dev/null
+++ b/keyboards/lets_split_eh/keymaps/that_canadian/keymap.c
@@ -0,0 +1,170 @@
+#include QMK_KEYBOARD_H
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+
+#define _LOWER 3
+#define _RAISE 4
+#define _FUNCTION 15
+#define _ADJUST 16
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ LOWER,
+ RAISE,
+ ADJUST
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+// Defines for task manager and such
+#define CALTDEL LCTL(LALT(KC_DEL))
+#define TSKMGR LCTL(LSFT(KC_ESC))
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Func | A | S | D | F | G | H | J | K | L | ; | Enter|
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | N | M | , | . | / | ' |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | ` | GUI | Alt |Lower | Space |Raise | Left | Down | Up |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT( \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
+ MO(_FUNCTION), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \
+ OSM(MOD_LSFT), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT, \
+ KC_LCTL, KC_GRV, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc | ! | @ | # | $ | % | ^ | & | * | ( | ) | Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } |Enter |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | F7 | F8 | F9 | F10 | F11 | F12 | | | Mute | | | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | |Lower | Bksp | Bksp |Raise | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT( \
+ KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______, \
+ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_MUTE, _______, KC_PIPE, \
+ _______, _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | | 4 | 5 | 6 | + | F5 | F6 | - | = | [ | ] |Enter |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |Enter | 7 | 8 | 9 | - | F11 | F12 |ISO # |ISO / | Mute | | \ |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | , | 0 | . |Lower | Bksp | Bksp |Raise | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT( \
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \
+ _______, KC_4, KC_5, KC_6, KC_PLUS, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______, \
+ KC_ENT, KC_7, KC_8, KC_9, KC_MINS, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_MUTE, _______, KC_BSLS, \
+ _______, KC_COMM, KC_0, KC_DOT, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |Taskmg| | | | | | | |RGBVAI|RGBSAI|RGBHUI|caltde|
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | | | | | | | |Qwerty|RGBVAD|RGBSAD|RGBHUD|RGBTOG|
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | | | | | | | | | | | |BLSTEP|
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | | | | | RESET|
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] = LAYOUT( \
+ TSKMGR, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, RGB_SAI, RGB_HUI, CALTDEL, \
+ _______, _______, _______, _______, _______, _______, _______, QWERTY, RGB_VAD, RGB_SAD, RGB_HUD, RGB_TOG, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_STEP, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET \
+),
+
+/* Function
+ * ,-----------------------------------------------------------------------------------.
+ * | | | | | | | | | Up | | | |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | | | | | | | | Left | Down |Right | | |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Caps | | | | | | | | | | | |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | | | | | | | | | | | |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_FUNCTION] = LAYOUT( \
+ _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, \
+ KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
+)
+
+};
+
+void persistent_default_layer_set(uint16_t default_layer) {
+ eeconfig_update_default_layer(default_layer);
+ default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ persistent_default_layer_set(1UL<<_QWERTY);
+ }
+ return false;
+ break;
+ case LOWER:
+ if (record->event.pressed) {
+ layer_on(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_LOWER);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case RAISE:
+ if (record->event.pressed) {
+ layer_on(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ } else {
+ layer_off(_RAISE);
+ update_tri_layer(_LOWER, _RAISE, _ADJUST);
+ }
+ return false;
+ break;
+ case ADJUST:
+ if (record->event.pressed) {
+ layer_on(_ADJUST);
+ } else {
+ layer_off(_ADJUST);
+ }
+ return false;
+ break;
+ }
+ return true;
+} \ No newline at end of file
diff --git a/keyboards/lets_split_eh/keymaps/that_canadian/rules.mk b/keyboards/lets_split_eh/keymaps/that_canadian/rules.mk
new file mode 100644
index 0000000000..457a3d01d4
--- /dev/null
+++ b/keyboards/lets_split_eh/keymaps/that_canadian/rules.mk
@@ -0,0 +1,3 @@
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
diff --git a/keyboards/lets_split_eh/lets_split_eh.c b/keyboards/lets_split_eh/lets_split_eh.c
new file mode 100644
index 0000000000..d5a312085d
--- /dev/null
+++ b/keyboards/lets_split_eh/lets_split_eh.c
@@ -0,0 +1 @@
+#include "lets_split_eh.h"
diff --git a/keyboards/lets_split_eh/lets_split_eh.h b/keyboards/lets_split_eh/lets_split_eh.h
new file mode 100644
index 0000000000..f3d2cd0d06
--- /dev/null
+++ b/keyboards/lets_split_eh/lets_split_eh.h
@@ -0,0 +1,27 @@
+#ifndef LETS_SPLIT_EH_H
+#define LETS_SPLIT_EH_H
+
+#include "quantum.h"
+
+#ifdef KEYBOARD_lets_split_eh_eh
+ #include "eh.h"
+#endif
+
+
+// Used to create a keymap using only KC_ prefixed keys
+#define LAYOUT_kc( \
+ L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+ L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+ L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+ L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
+ ) \
+ LAYOUT( \
+ KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \
+ KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \
+ KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \
+ KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \
+ )
+
+#define LAYOUT_kc_ortho_4x12 LAYOUT_kc
+
+#endif
diff --git a/keyboards/lets_split_eh/rules.mk b/keyboards/lets_split_eh/rules.mk
new file mode 100644
index 0000000000..dffeb9fa3c
--- /dev/null
+++ b/keyboards/lets_split_eh/rules.mk
@@ -0,0 +1,70 @@
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+# This definition is optional, and if your keyboard supports multiple bootloaders of
+# different sizes, comment this out, and the correct address will be loaded
+# automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = atmel-dfu
+
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Build Options
+# change to "no" to disable the options, or define them in the Makefile in
+# the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+MIDI_ENABLE = no # MIDI controls
+AUDIO_ENABLE = no # Audio output on port C6
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
+API_SYSEX_ENABLE = no
+
+SPLIT_KEYBOARD = yes
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+
+DEFAULT_FOLDER = lets_split_eh/eh
diff --git a/quantum/keymap_common.c b/quantum/keymap_common.c
index 9a412b66ad..50af15d626 100644
--- a/quantum/keymap_common.c
+++ b/quantum/keymap_common.c
@@ -29,6 +29,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "backlight.h"
#include "quantum.h"
+#ifdef SPLIT_KEYBOARD
+ #include "split_flags.h"
+#endif
+
#ifdef MIDI_ENABLE
#include "process_midi.h"
#endif
@@ -134,21 +138,39 @@ action_t action_for_key(uint8_t layer, keypos_t key)
#ifdef BACKLIGHT_ENABLE
case BL_ON:
action.code = ACTION_BACKLIGHT_ON();
+ #ifdef SPLIT_KEYBOARD
+ BACKLIT_DIRTY = true;
+ #endif
break;
case BL_OFF:
action.code = ACTION_BACKLIGHT_OFF();
+ #ifdef SPLIT_KEYBOARD
+ BACKLIT_DIRTY = true;
+ #endif
break;
case BL_DEC:
action.code = ACTION_BACKLIGHT_DECREASE();
+ #ifdef SPLIT_KEYBOARD
+ BACKLIT_DIRTY = true;
+ #endif
break;
case BL_INC:
action.code = ACTION_BACKLIGHT_INCREASE();
+ #ifdef SPLIT_KEYBOARD
+ BACKLIT_DIRTY = true;
+ #endif
break;
case BL_TOGG:
action.code = ACTION_BACKLIGHT_TOGGLE();
+ #ifdef SPLIT_KEYBOARD
+ BACKLIT_DIRTY = true;
+ #endif
break;
case BL_STEP:
action.code = ACTION_BACKLIGHT_STEP();
+ #ifdef SPLIT_KEYBOARD
+ BACKLIT_DIRTY = true;
+ #endif
break;
#endif
#ifdef SWAP_HANDS_ENABLE
diff --git a/quantum/quantum.c b/quantum/quantum.c
index 2bd2c71af5..9c6ed3330e 100644
--- a/quantum/quantum.c
+++ b/quantum/quantum.c
@@ -312,8 +312,16 @@ bool process_record_quantum(keyrecord_t *record) {
#endif
#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
case RGB_TOG:
+ // Split keyboards need to trigger on key-up for edge-case issue
+ #ifndef SPLIT_KEYBOARD
if (record->event.pressed) {
+ #else
+ if (!record->event.pressed) {
+ #endif
rgblight_toggle();
+ #ifdef SPLIT_KEYBOARD
+ RGB_DIRTY = true;
+ #endif
}
return false;
case RGB_MODE_FORWARD:
@@ -325,6 +333,9 @@ bool process_record_quantum(keyrecord_t *record) {
else {
rgblight_step();
}
+ #ifdef SPLIT_KEYBOARD
+ RGB_DIRTY = true;
+ #endif
}
return false;
case RGB_MODE_REVERSE:
@@ -336,36 +347,87 @@ bool process_record_quantum(keyrecord_t *record) {
else {
rgblight_step_reverse();
}
+ #ifdef SPLIT_KEYBOARD
+ RGB_DIRTY = true;
+ #endif
}
return false;
case RGB_HUI:
+ // Split keyboards need to trigger on key-up for edge-case issue
+ #ifndef SPLIT_KEYBOARD
if (record->event.pressed) {
+ #else
+ if (!record->event.pressed) {
+ #endif
rgblight_increase_hue();
+ #ifdef SPLIT_KEYBOARD
+ RGB_DIRTY = true;
+ #endif
}
return false;
case RGB_HUD:
+ // Split keyboards need to trigger on key-up for edge-case issue
+ #ifndef SPLIT_KEYBOARD
if (record->event.pressed) {
+ #else
+ if (!record->event.pressed) {
+ #endif
rgblight_decrease_hue();
+ #ifdef SPLIT_KEYBOARD
+ RGB_DIRTY = true;
+ #endif
}
return false;
case RGB_SAI:
+ // Split keyboards need to trigger on key-up for edge-case issue
+ #ifndef SPLIT_KEYBOARD
if (record->event.pressed) {
+ #else
+ if (!record->event.pressed) {
+ #endif
rgblight_increase_sat();
+ #ifdef SPLIT_KEYBOARD
+ RGB_DIRTY = true;
+ #endif
}
return false;
case RGB_SAD:
+ // Split keyboards need to trigger on key-up for edge-case issue
+ #ifndef SPLIT_KEYBOARD
if (record->event.pressed) {
+ #else
+ if (!record->event.pressed) {
+ #endif
rgblight_decrease_sat();
+ #ifdef SPLIT_KEYBOARD
+ RGB_DIRTY = true;
+ #endif
}
return false;
case RGB_VAI:
+ // Split keyboards need to trigger on key-up for edge-case issue
+ #ifndef SPLIT_KEYBOARD
if (record->event.pressed) {
+ #else
+ if (!record->event.pressed) {
+ #endif
rgblight_increase_val();
+ #ifdef SPLIT_KEYBOARD
+ RGB_DIRTY = true;
+ #endif
}
return false;
case RGB_VAD:
+ // Split keyboards need to trigger on key-up for edge-case issue
+ #ifndef SPLIT_KEYBOARD
if (record->event.pressed) {
+ #else
+ if (!record->event.pressed) {
+ #endif
rgblight_decrease_val();
+ #ifdef SPLIT_KEYBOARD
+ RGB_DIRTY = true;
+ #endif
}
return false;
case RGB_SPI:
@@ -381,6 +443,9 @@ bool process_record_quantum(keyrecord_t *record) {
case RGB_MODE_PLAIN:
if (record->event.pressed) {
rgblight_mode(1);
+ #ifdef SPLIT_KEYBOARD
+ RGB_DIRTY = true;
+ #endif
}
return false;
case RGB_MODE_BREATHE:
diff --git a/quantum/quantum.h b/quantum/quantum.h
index 2238464124..0675a90ac3 100644
--- a/quantum/quantum.h
+++ b/quantum/quantum.h
@@ -33,9 +33,15 @@
#ifdef RGBLIGHT_ENABLE
#include "rgblight.h"
#endif
+
+#ifdef SPLIT_KEYBOARD
+ #include "split_flags.h"
+#endif
+
#ifdef RGB_MATRIX_ENABLE
#include "rgb_matrix.h"
#endif
+
#include "action_layer.h"
#include "eeconfig.h"
#include <stddef.h>
diff --git a/quantum/rgblight.c b/quantum/rgblight.c
index 2490a1d9f3..aa70cbd9ec 100644
--- a/quantum/rgblight.c
+++ b/quantum/rgblight.c
@@ -127,7 +127,7 @@ void eeconfig_update_rgblight(uint32_t val) {
#endif
}
void eeconfig_update_rgblight_default(void) {
- dprintf("eeconfig_update_rgblight_default\n");
+ //dprintf("eeconfig_update_rgblight_default\n");
rgblight_config.enable = 1;
rgblight_config.mode = 1;
rgblight_config.hue = 0;
diff --git a/quantum/rgblight.h b/quantum/rgblight.h
index e9c192a4ed..0f7b5ffb56 100644
--- a/quantum/rgblight.h
+++ b/quantum/rgblight.h
@@ -76,6 +76,10 @@
#include "rgblight_types.h"
#include "rgblight_list.h"
+#if defined(__AVR__)
+ #include <avr/pgmspace.h>
+#endif
+
extern LED_TYPE led[RGBLED_NUM];
extern const uint8_t RGBLED_BREATHING_INTERVALS[4] PROGMEM;
diff --git a/quantum/split_common/eeprom-lefthand.eep b/quantum/split_common/eeprom-lefthand.eep
new file mode 100644
index 0000000000..bda23cdb6e
--- /dev/null
+++ b/quantum/split_common/eeprom-lefthand.eep
@@ -0,0 +1,2 @@
+:0F000000000000000000000000000000000001F0
+:00000001FF
diff --git a/quantum/split_common/eeprom-righthand.eep b/quantum/split_common/eeprom-righthand.eep
new file mode 100644
index 0000000000..549cd1ef0a
--- /dev/null
+++ b/quantum/split_common/eeprom-righthand.eep
@@ -0,0 +1,2 @@
+:0F000000000000000000000000000000000000F1
+:00000001FF
diff --git a/quantum/split_common/i2c.c b/quantum/split_common/i2c.c
new file mode 100644
index 0000000000..b3d7fcc681
--- /dev/null
+++ b/quantum/split_common/i2c.c
@@ -0,0 +1,187 @@
+#include <util/twi.h>
+#include <avr/io.h>
+#include <stdlib.h>
+#include <avr/interrupt.h>
+#include <util/twi.h>
+#include <stdbool.h>
+#include "i2c.h"
+#include "split_flags.h"
+
+#if defined(USE_I2C) || defined(EH)
+
+// Limits the amount of we wait for any one i2c transaction.
+// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
+// 9 bits, a single transaction will take around 90μs to complete.
+//
+// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit
+// poll loop takes at least 8 clock cycles to execute
+#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
+
+#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
+
+volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+static volatile uint8_t slave_buffer_pos;
+static volatile bool slave_has_register_set = false;
+
+// Wait for an i2c operation to finish
+inline static
+void i2c_delay(void) {
+ uint16_t lim = 0;
+ while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
+ lim++;
+
+ // easier way, but will wait slightly longer
+ // _delay_us(100);
+}
+
+// Setup twi to run at 100kHz
+void i2c_master_init(void) {
+ // no prescaler
+ TWSR = 0;
+ // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
+ // Check datasheets for more info.
+ TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
+}
+
+// Start a transaction with the given i2c slave address. The direction of the
+// transfer is set with I2C_READ and I2C_WRITE.
+// returns: 0 => success
+// 1 => error
+uint8_t i2c_master_start(uint8_t address) {
+ TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
+
+ i2c_delay();
+
+ // check that we started successfully
+ if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
+ return 1;
+
+ TWDR = address;
+ TWCR = (1<<TWINT) | (1<<TWEN);
+
+ i2c_delay();
+
+ if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
+ return 1; // slave did not acknowledge
+ else
+ return 0; // success
+}
+
+
+// Finish the i2c transaction.
+void i2c_master_stop(void) {
+ TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+
+ uint16_t lim = 0;
+ while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
+ lim++;
+}
+
+// Write one byte to the i2c slave.
+// returns 0 => slave ACK
+// 1 => slave NACK
+uint8_t i2c_master_write(uint8_t data) {
+ TWDR = data;
+ TWCR = (1<<TWINT) | (1<<TWEN);
+
+ i2c_delay();
+
+ // check if the slave acknowledged us
+ return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
+}
+
+uint8_t i2c_master_write_data(void *const TXdata, uint8_t dataLen) {
+
+ uint8_t *data = (uint8_t *)TXdata;
+ int err = 0;
+
+ for (int i = 0; i < dataLen; i++) {
+ err = i2c_master_write(data[i]);
+
+ if ( err )
+ return err;
+ }
+
+ return err;
+
+}
+
+// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
+// if ack=0 the acknowledge bit is not set.
+// returns: byte read from i2c device
+uint8_t i2c_master_read(int ack) {
+ TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
+
+ i2c_delay();
+ return TWDR;
+}
+
+void i2c_reset_state(void) {
+ TWCR = 0;
+}
+
+void i2c_slave_init(uint8_t address) {
+ TWAR = address << 0; // slave i2c address
+ // TWEN - twi enable
+ // TWEA - enable address acknowledgement
+ // TWINT - twi interrupt flag
+ // TWIE - enable the twi interrupt
+ TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
+}
+
+ISR(TWI_vect);
+
+ISR(TWI_vect) {
+ uint8_t ack = 1;
+ switch(TW_STATUS) {
+ case TW_SR_SLA_ACK:
+ // this device has been addressed as a slave receiver
+ slave_has_register_set = false;
+ break;
+
+ case TW_SR_DATA_ACK:
+ // this device has received data as a slave receiver
+ // The first byte that we receive in this transaction sets the location
+ // of the read/write location of the slaves memory that it exposes over
+ // i2c. After that, bytes will be written at slave_buffer_pos, incrementing
+ // slave_buffer_pos after each write.
+ if(!slave_has_register_set) {
+ slave_buffer_pos = TWDR;
+ // don't acknowledge the master if this memory loctaion is out of bounds
+ if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
+ ack = 0;
+ slave_buffer_pos = 0;
+ }
+
+ slave_has_register_set = true;
+ } else {
+ i2c_slave_buffer[slave_buffer_pos] = TWDR;
+
+ if ( slave_buffer_pos == I2C_BACKLIT_START) {
+ BACKLIT_DIRTY = true;
+ } else if ( slave_buffer_pos == (I2C_RGB_START+3)) {
+ RGB_DIRTY = true;
+ }
+
+ BUFFER_POS_INC();
+ }
+ break;
+
+ case TW_ST_SLA_ACK:
+ case TW_ST_DATA_ACK:
+ // master has addressed this device as a slave transmitter and is
+ // requesting data.
+ TWDR = i2c_slave_buffer[slave_buffer_pos];
+ BUFFER_POS_INC();
+ break;
+
+ case TW_BUS_ERROR: // something went wrong, reset twi state
+ TWCR = 0;
+ default:
+ break;
+ }
+ // Reset everything, so we are ready for the next TWI interrupt
+ TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
+}
+#endif
diff --git a/quantum/split_common/i2c.h b/quantum/split_common/i2c.h
new file mode 100644
index 0000000000..b4c72bde0e
--- /dev/null
+++ b/quantum/split_common/i2c.h
@@ -0,0 +1,60 @@
+#ifndef I2C_H
+#define I2C_H
+
+#include <stdint.h>
+
+#ifndef F_CPU
+#define F_CPU 16000000UL
+#endif
+
+#define I2C_READ 1
+#define I2C_WRITE 0
+
+#define I2C_ACK 1
+#define I2C_NACK 0
+
+// Address location defines (Keymap should be last, as it's size is dynamic)
+#define I2C_BACKLIT_START 0x00
+// Need 4 bytes for RGB (32 bit)
+#define I2C_RGB_START 0x01
+#define I2C_KEYMAP_START 0x06
+
+// Slave buffer (8bit per)
+// Rows per hand + backlit space + rgb space
+// TODO : Make this dynamically sized
+#define SLAVE_BUFFER_SIZE 0x20
+
+// i2c SCL clock frequency
+#define SCL_CLOCK 400000L
+
+// Support 8bits right now (8 cols) will need to edit to take higher (code exists in delta split?)
+extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+void i2c_master_init(void);
+uint8_t i2c_master_start(uint8_t address);
+void i2c_master_stop(void);
+uint8_t i2c_master_write(uint8_t data);
+uint8_t i2c_master_write_data(void *const TXdata, uint8_t dataLen);
+uint8_t i2c_master_read(int);
+void i2c_reset_state(void);
+void i2c_slave_init(uint8_t address);
+
+
+static inline unsigned char i2c_start_read(unsigned char addr) {
+ return i2c_master_start((addr << 1) | I2C_READ);
+}
+
+static inline unsigned char i2c_start_write(unsigned char addr) {
+ return i2c_master_start((addr << 1) | I2C_WRITE);
+}
+
+// from SSD1306 scrips
+extern unsigned char i2c_rep_start(unsigned char addr);
+extern void i2c_start_wait(unsigned char addr);
+extern unsigned char i2c_readAck(void);
+extern unsigned char i2c_readNak(void);
+extern unsigned char i2c_read(unsigned char ack);
+
+#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak();
+
+#endif
diff --git a/quantum/split_common/matrix.c b/quantum/split_common/matrix.c
new file mode 100644
index 0000000000..071f0481a4
--- /dev/null
+++ b/quantum/split_common/matrix.c
@@ -0,0 +1,510 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "split_util.h"
+#include "pro_micro.h"
+#include "config.h"
+#include "timer.h"
+#include "split_flags.h"
+
+#ifdef RGBLIGHT_ENABLE
+# include "rgblight.h"
+#endif
+#ifdef BACKLIGHT_ENABLE
+# include "backlight.h"
+#endif
+
+#if defined(USE_I2C) || defined(EH)
+# include "i2c.h"
+#else // USE_SERIAL
+# include "serial.h"
+#endif
+
+#ifndef DEBOUNCING_DELAY
+# define DEBOUNCING_DELAY 5
+#endif
+
+#if (DEBOUNCING_DELAY > 0)
+ static uint16_t debouncing_time;
+ static bool debouncing = false;
+#endif
+
+#if (MATRIX_COLS <= 8)
+# define print_matrix_header() print("\nr/c 01234567\n")
+# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
+# define matrix_bitpop(i) bitpop(matrix[i])
+# define ROW_SHIFTER ((uint8_t)1)
+#else
+# error "Currently only supports 8 COLS"
+#endif
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+#define ERROR_DISCONNECT_COUNT 5
+
+#define ROWS_PER_HAND (MATRIX_ROWS/2)
+
+static uint8_t error_count = 0;
+
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+#if (DIODE_DIRECTION == COL2ROW)
+ static void init_cols(void);
+ static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
+ static void unselect_rows(void);
+ static void select_row(uint8_t row);
+ static void unselect_row(uint8_t row);
+#elif (DIODE_DIRECTION == ROW2COL)
+ static void init_rows(void);
+ static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
+ static void unselect_cols(void);
+ static void unselect_col(uint8_t col);
+ static void select_col(uint8_t col);
+#endif
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+ matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+ matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_slave_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void)
+{
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+ return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+#ifdef DISABLE_JTAG
+ // JTAG disable for PORT F. write JTD bit twice within four cycles.
+ MCUCR |= (1<<JTD);
+ MCUCR |= (1<<JTD);
+#endif
+
+ debug_enable = true;
+ debug_matrix = true;
+ debug_mouse = true;
+ // initialize row and col
+#if (DIODE_DIRECTION == COL2ROW)
+ unselect_rows();
+ init_cols();
+#elif (DIODE_DIRECTION == ROW2COL)
+ unselect_cols();
+ init_rows();
+#endif
+
+ // initialize matrix state: all keys off
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ matrix[i] = 0;
+ matrix_debouncing[i] = 0;
+ }
+
+ matrix_init_quantum();
+
+}
+
+uint8_t _matrix_scan(void)
+{
+ int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
+#if (DIODE_DIRECTION == COL2ROW)
+ // Set row, read cols
+ for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
+# if (DEBOUNCING_DELAY > 0)
+ bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);
+
+ if (matrix_changed) {
+ debouncing = true;
+ debouncing_time = timer_read();
+ }
+
+# else
+ read_cols_on_row(matrix+offset, current_row);
+# endif
+
+ }
+
+#elif (DIODE_DIRECTION == ROW2COL)
+ // Set col, read rows
+ for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+# if (DEBOUNCING_DELAY > 0)
+ bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
+ if (matrix_changed) {
+ debouncing = true;
+ debouncing_time = timer_read();
+ }
+# else
+ read_rows_on_col(matrix+offset, current_col);
+# endif
+
+ }
+#endif
+
+# if (DEBOUNCING_DELAY > 0)
+ if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
+ for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+ matrix[i+offset] = matrix_debouncing[i+offset];
+ }
+ debouncing = false;
+ }
+# endif
+
+ return 1;
+}
+
+#if defined(USE_I2C) || defined(EH)
+
+// Get rows from other half over i2c
+int i2c_transaction(void) {
+ int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+ int err = 0;
+
+ // write backlight info
+ #ifdef BACKLIGHT_ENABLE
+ if (BACKLIT_DIRTY) {
+ err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
+ if (err) goto i2c_error;
+
+ // Backlight location
+ err = i2c_master_write(I2C_BACKLIT_START);
+ if (err) goto i2c_error;
+
+ // Write backlight
+ i2c_master_write(get_backlight_level());
+
+ BACKLIT_DIRTY = false;
+ }
+ #endif
+
+ err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
+ if (err) goto i2c_error;
+
+ // start of matrix stored at I2C_KEYMAP_START
+ err = i2c_master_write(I2C_KEYMAP_START);
+ if (err) goto i2c_error;
+
+ // Start read
+ err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
+ if (err) goto i2c_error;
+
+ if (!err) {
+ int i;
+ for (i = 0; i < ROWS_PER_HAND-1; ++i) {
+ matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
+ }
+ matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
+ i2c_master_stop();
+ } else {
+i2c_error: // the cable is disconnceted, or something else went wrong
+ i2c_reset_state();
+ return err;
+ }
+
+ #ifdef RGBLIGHT_ENABLE
+ if (RGB_DIRTY) {
+ err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
+ if (err) goto i2c_error;
+
+ // RGB Location
+ err = i2c_master_write(I2C_RGB_START);
+ if (err) goto i2c_error;
+
+ uint32_t dword = eeconfig_read_rgblight();
+
+ // Write RGB
+ err = i2c_master_write_data(&dword, 4);
+ if (err) goto i2c_error;
+
+ RGB_DIRTY = false;
+ i2c_master_stop();
+ }
+ #endif
+
+ return 0;
+}
+
+#else // USE_SERIAL
+
+int serial_transaction(void) {
+ int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+ if (serial_update_buffers()) {
+ return 1;
+ }
+
+ for (int i = 0; i < ROWS_PER_HAND; ++i) {
+ matrix[slaveOffset+i] = serial_slave_buffer[i];
+ }
+ return 0;
+}
+#endif
+
+uint8_t matrix_scan(void)
+{
+ uint8_t ret = _matrix_scan();
+
+#if defined(USE_I2C) || defined(EH)
+ if( i2c_transaction() ) {
+#else // USE_SERIAL
+ if( serial_transaction() ) {
+#endif
+
+ error_count++;
+
+ if (error_count > ERROR_DISCONNECT_COUNT) {
+ // reset other half if disconnected
+ int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+ for (int i = 0; i < ROWS_PER_HAND; ++i) {
+ matrix[slaveOffset+i] = 0;
+ }
+ }
+ } else {
+ error_count = 0;
+ }
+ matrix_scan_quantum();
+ return ret;
+}
+
+void matrix_slave_scan(void) {
+ _matrix_scan();
+
+ int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
+
+#if defined(USE_I2C) || defined(EH)
+ for (int i = 0; i < ROWS_PER_HAND; ++i) {
+ i2c_slave_buffer[I2C_KEYMAP_START+i] = matrix[offset+i];
+ }
+#else // USE_SERIAL
+ for (int i = 0; i < ROWS_PER_HAND; ++i) {
+ serial_slave_buffer[i] = matrix[offset+i];
+ }
+#endif
+ matrix_slave_scan_user();
+}
+
+bool matrix_is_modified(void)
+{
+ if (debouncing) return false;
+ return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ print("\nr/c 0123456789ABCDEF\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ phex(row); print(": ");
+ pbin_reverse16(matrix_get_row(row));
+ print("\n");
+ }
+}
+
+uint8_t matrix_key_count(void)
+{
+ uint8_t count = 0;
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ count += bitpop16(matrix[i]);
+ }
+ return count;
+}
+
+#if (DIODE_DIRECTION == COL2ROW)
+
+static void init_cols(void)
+{
+ for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+ uint8_t pin = col_pins[x];
+ _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+ _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
+ }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
+{
+ // Store last value of row prior to reading
+ matrix_row_t last_row_value = current_matrix[current_row];
+
+ // Clear data in matrix row
+ current_matrix[current_row] = 0;
+
+ // Select row and wait for row selecton to stabilize
+ select_row(current_row);
+ wait_us(30);
+
+ // For each col...
+ for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+
+ // Select the col pin to read (active low)
+ uint8_t pin = col_pins[col_index];
+ uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
+
+ // Populate the matrix row with the state of the col pin
+ current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index);
+ }
+
+ // Unselect row
+ unselect_row(current_row);
+
+ return (last_row_value != current_matrix[current_row]);
+}
+
+static void select_row(uint8_t row)
+{
+ uint8_t pin = row_pins[row];
+ _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
+ _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_row(uint8_t row)
+{
+ uint8_t pin = row_pins[row];
+ _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+ _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
+}
+
+static void unselect_rows(void)
+{
+ for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
+ uint8_t pin = row_pins[x];
+ _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+ _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
+ }
+}
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+static void init_rows(void)
+{
+ for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
+ uint8_t pin = row_pins[x];
+ _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+ _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
+ }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+ bool matrix_changed = false;
+
+ // Select col and wait for col selecton to stabilize
+ select_col(current_col);
+ wait_us(30);
+
+ // For each row...
+ for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++)
+ {
+
+ // Store last value of row prior to reading
+ matrix_row_t last_row_value = current_matrix[row_index];
+
+ // Check row pin state
+ if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
+ {
+ // Pin LO, set col bit
+ current_matrix[row_index] |= (ROW_SHIFTER << current_col);
+ }
+ else
+ {
+ // Pin HI, clear col bit
+ current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
+ }
+
+ // Determine if the matrix changed state
+ if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
+ {
+ matrix_changed = true;
+ }
+ }
+
+ // Unselect col
+ unselect_col(current_col);
+
+ return matrix_changed;
+}
+
+static void select_col(uint8_t col)
+{
+ uint8_t pin = col_pins[col];
+ _SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
+ _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_col(uint8_t col)
+{
+ uint8_t pin = col_pins[col];
+ _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+ _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
+}
+
+static void unselect_cols(void)
+{
+ for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+ uint8_t pin = col_pins[x];
+ _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+ _SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
+ }
+}
+
+#endif
diff --git a/quantum/split_common/serial.c b/quantum/split_common/serial.c
new file mode 100644
index 0000000000..74bcbb6bf6
--- /dev/null
+++ b/quantum/split_common/serial.c
@@ -0,0 +1,228 @@
+/*
+ * WARNING: be careful changing this code, it is very timing dependent
+ */
+
+#ifndef F_CPU
+#define F_CPU 16000000
+#endif
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <stdbool.h>
+#include "serial.h"
+
+#ifndef USE_I2C
+
+// Serial pulse period in microseconds. Its probably a bad idea to lower this
+// value.
+#define SERIAL_DELAY 24
+
+uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
+uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
+
+#define SLAVE_DATA_CORRUPT (1<<0)
+volatile uint8_t status = 0;
+
+inline static
+void serial_delay(void) {
+ _delay_us(SERIAL_DELAY);
+}
+
+inline static
+void serial_output(void) {
+ SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
+}
+
+// make the serial pin an input with pull-up resistor
+inline static
+void serial_input(void) {
+ SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK;
+ SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+inline static
+uint8_t serial_read_pin(void) {
+ return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
+}
+
+inline static
+void serial_low(void) {
+ SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
+}
+
+inline static
+void serial_high(void) {
+ SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+void serial_master_init(void) {
+ serial_output();
+ serial_high();
+}
+
+void serial_slave_init(void) {
+ serial_input();
+
+ // Enable INT0
+ EIMSK |= _BV(INT0);
+ // Trigger on falling edge of INT0
+ EICRA &= ~(_BV(ISC00) | _BV(ISC01));
+}
+
+// Used by the master to synchronize timing with the slave.
+static
+void sync_recv(void) {
+ serial_input();
+ // This shouldn't hang if the slave disconnects because the
+ // serial line will float to high if the slave does disconnect.
+ while (!serial_read_pin());
+ serial_delay();
+}
+
+// Used by the slave to send a synchronization signal to the master.
+static
+void sync_send(void) {
+ serial_output();
+
+ serial_low();
+ serial_delay();
+
+ serial_high();
+}
+
+// Reads a byte from the serial line
+static
+uint8_t serial_read_byte(void) {
+ uint8_t byte = 0;
+ serial_input();
+ for ( uint8_t i = 0; i < 8; ++i) {
+ byte = (byte << 1) | serial_read_pin();
+ serial_delay();
+ _delay_us(1);
+ }
+
+ return byte;
+}
+
+// Sends a byte with MSB ordering
+static
+void serial_write_byte(uint8_t data) {
+ uint8_t b = 8;
+ serial_output();
+ while( b-- ) {
+ if(data & (1 << b)) {
+ serial_high();
+ } else {
+ serial_low();
+ }
+ serial_delay();
+ }
+}
+
+// interrupt handle to be used by the slave device
+ISR(SERIAL_PIN_INTERRUPT) {
+ sync_send();
+
+ uint8_t checksum = 0;
+ for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+ serial_write_byte(serial_slave_buffer[i]);
+ sync_send();
+ checksum += serial_slave_buffer[i];
+ }
+ serial_write_byte(checksum);
+ sync_send();
+
+ // wait for the sync to finish sending
+ serial_delay();
+
+ // read the middle of pulses
+ _delay_us(SERIAL_DELAY/2);
+
+ uint8_t checksum_computed = 0;
+ for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+ serial_master_buffer[i] = serial_read_byte();
+ sync_send();
+ checksum_computed += serial_master_buffer[i];
+ }
+ uint8_t checksum_received = serial_read_byte();
+ sync_send();
+
+ serial_input(); // end transaction
+
+ if ( checksum_computed != checksum_received ) {
+ status |= SLAVE_DATA_CORRUPT;
+ } else {
+ status &= ~SLAVE_DATA_CORRUPT;
+ }
+}
+
+inline
+bool serial_slave_DATA_CORRUPT(void) {
+ return status & SLAVE_DATA_CORRUPT;
+}
+
+// Copies the serial_slave_buffer to the master and sends the
+// serial_master_buffer to the slave.
+//
+// Returns:
+// 0 => no error
+// 1 => slave did not respond
+int serial_update_buffers(void) {
+ // this code is very time dependent, so we need to disable interrupts
+ cli();
+
+ // signal to the slave that we want to start a transaction
+ serial_output();
+ serial_low();
+ _delay_us(1);
+
+ // wait for the slaves response
+ serial_input();
+ serial_high();
+ _delay_us(SERIAL_DELAY);
+
+ // check if the slave is present
+ if (serial_read_pin()) {
+ // slave failed to pull the line low, assume not present
+ sei();
+ return 1;
+ }
+
+ // if the slave is present syncronize with it
+ sync_recv();
+
+ uint8_t checksum_computed = 0;
+ // receive data from the slave
+ for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+ serial_slave_buffer[i] = serial_read_byte();
+ sync_recv();
+ checksum_computed += serial_slave_buffer[i];
+ }
+ uint8_t checksum_received = serial_read_byte();
+ sync_recv();
+
+ if (checksum_computed != checksum_received) {
+ sei();
+ return 1;
+ }
+
+ uint8_t checksum = 0;
+ // send data to the slave
+ for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+ serial_write_byte(serial_master_buffer[i]);
+ sync_recv();
+ checksum += serial_master_buffer[i];
+ }
+ serial_write_byte(checksum);
+ sync_recv();
+
+ // always, release the line when not in use
+ serial_output();
+ serial_high();
+
+ sei();
+ return 0;
+}
+
+#endif
diff --git a/quantum/split_common/serial.h b/quantum/split_common/serial.h
new file mode 100644
index 0000000000..15fe4db7b4
--- /dev/null
+++ b/quantum/split_common/serial.h
@@ -0,0 +1,26 @@
+#ifndef MY_SERIAL_H
+#define MY_SERIAL_H
+
+#include "config.h"
+#include <stdbool.h>
+
+/* TODO: some defines for interrupt setup */
+#define SERIAL_PIN_DDR DDRD
+#define SERIAL_PIN_PORT PORTD
+#define SERIAL_PIN_INPUT PIND
+#define SERIAL_PIN_MASK _BV(PD0)
+#define SERIAL_PIN_INTERRUPT INT0_vect
+
+#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_MASTER_BUFFER_LENGTH 1
+
+// Buffers for master - slave communication
+extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
+extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
+
+void serial_master_init(void);
+void serial_slave_init(void);
+int serial_update_buffers(void);
+bool serial_slave_data_corrupt(void);
+
+#endif
diff --git a/quantum/split_common/split_flags.c b/quantum/split_common/split_flags.c
new file mode 100644
index 0000000000..1f5825d650
--- /dev/null
+++ b/quantum/split_common/split_flags.c
@@ -0,0 +1,5 @@
+#include "split_flags.h"
+
+volatile bool RGB_DIRTY = false;
+
+volatile bool BACKLIT_DIRTY = false; \ No newline at end of file
diff --git a/quantum/split_common/split_flags.h b/quantum/split_common/split_flags.h
new file mode 100644
index 0000000000..f101fff5b5
--- /dev/null
+++ b/quantum/split_common/split_flags.h
@@ -0,0 +1,20 @@
+#ifndef SPLIT_FLAGS_H
+#define SPLIT_FLAGS_H
+
+#include <stdbool.h>
+#include <stdint.h>
+
+/**
+* Global Flags
+**/
+
+//RGB Stuff
+extern volatile bool RGB_DIRTY;
+
+
+//Backlight Stuff
+extern volatile bool BACKLIT_DIRTY;
+
+
+
+#endif \ No newline at end of file
diff --git a/quantum/split_common/split_util.c b/quantum/split_common/split_util.c
new file mode 100644
index 0000000000..340a631375
--- /dev/null
+++ b/quantum/split_common/split_util.c
@@ -0,0 +1,145 @@
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/power.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <avr/eeprom.h>
+#include "split_util.h"
+#include "matrix.h"
+#include "keyboard.h"
+#include "config.h"
+#include "timer.h"
+#include "split_flags.h"
+
+#ifdef RGBLIGHT_ENABLE
+# include "rgblight.h"
+#endif
+#ifdef BACKLIGHT_ENABLE
+# include "backlight.h"
+#endif
+
+#ifdef SPLIT_HAND_PIN
+# include "pincontrol.h"
+#endif
+
+#if defined(USE_I2C) || defined(EH)
+# include "i2c.h"
+#else
+# include "serial.h"
+#endif
+
+volatile bool isLeftHand = true;
+
+volatile uint8_t setTries = 0;
+
+static void setup_handedness(void) {
+ #ifdef SPLIT_HAND_PIN
+ // Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand
+ pinMode(SPLIT_HAND_PIN, PinDirectionInput);
+ isLeftHand = digitalRead(SPLIT_HAND_PIN);
+ #else
+ #ifdef EE_HANDS
+ isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
+ #else
+ // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
+ #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
+ isLeftHand = !has_usb();
+ #else
+ isLeftHand = has_usb();
+ #endif
+ #endif
+ #endif
+}
+
+static void keyboard_master_setup(void) {
+#if defined(USE_I2C) || defined(EH)
+ i2c_master_init();
+ #ifdef SSD1306OLED
+ matrix_master_OLED_init ();
+ #endif
+#else
+ serial_master_init();
+#endif
+
+ // For master the Backlight info needs to be sent on startup
+ // Otherwise the salve won't start with the proper info until an update
+ BACKLIT_DIRTY = true;
+}
+
+static void keyboard_slave_setup(void) {
+ timer_init();
+#if defined(USE_I2C) || defined(EH)
+ i2c_slave_init(SLAVE_I2C_ADDRESS);
+#else
+ serial_slave_init();
+#endif
+}
+
+bool has_usb(void) {
+ USBCON |= (1 << OTGPADE); //enables VBUS pad
+ _delay_us(5);
+ return (USBSTA & (1<<VBUS)); //checks state of VBUS
+}
+
+void split_keyboard_setup(void) {
+ setup_handedness();
+
+ if (has_usb()) {
+ keyboard_master_setup();
+ } else {
+ keyboard_slave_setup();
+ }
+ sei();
+}
+
+void keyboard_slave_loop(void) {
+ matrix_init();
+
+ //Init RGB
+ #ifdef RGBLIGHT_ENABLE
+ rgblight_init();
+ #endif
+
+ while (1) {
+ matrix_slave_scan();
+
+ // read backlight info
+ #ifdef BACKLIGHT_ENABLE
+ if (BACKLIT_DIRTY) {
+ backlight_set(i2c_slave_buffer[I2C_BACKLIT_START]);
+ BACKLIT_DIRTY = false;
+ }
+ #endif
+ #ifdef RGBLIGHT_ENABLE
+ if (RGB_DIRTY) {
+ cli();
+ uint32_t dword;
+
+ /*dword = i2c_slave_buffer[I2C_RGB_START + 3];
+ dword = (dword << 8) + i2c_slave_buffer[I2C_RGB_START + 2];
+ dword = (dword << 8) + i2c_slave_buffer[I2C_RGB_START + 1];
+ dword = (dword << 8) + i2c_slave_buffer[I2C_RGB_START];*/
+
+
+ uint8_t *dword_dat = (uint8_t *)(&dword);
+ for (int i = 0; i < 4; i++) {
+ dword_dat[i] = i2c_slave_buffer[I2C_RGB_START+i];
+ }
+
+ rgblight_update_dword(dword);
+ RGB_DIRTY = false;
+ sei();
+ }
+ #endif
+ }
+}
+
+// this code runs before the usb and keyboard is initialized
+void matrix_setup(void) {
+ split_keyboard_setup();
+
+ if (!has_usb()) {
+ //rgblight_init();
+ keyboard_slave_loop();
+ }
+}
diff --git a/quantum/split_common/split_util.h b/quantum/split_common/split_util.h
new file mode 100644
index 0000000000..d6cf3e72a9
--- /dev/null
+++ b/quantum/split_common/split_util.h
@@ -0,0 +1,23 @@
+#ifndef SPLIT_KEYBOARD_UTIL_H
+#define SPLIT_KEYBOARD_UTIL_H
+
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include "eeconfig.h"
+
+#define SLAVE_I2C_ADDRESS 0x32
+
+extern volatile bool isLeftHand;
+
+// slave version of matix scan, defined in matrix.c
+void matrix_slave_scan(void);
+
+void split_keyboard_setup(void);
+bool has_usb(void);
+void keyboard_slave_loop(void);
+
+void matrix_master_OLED_init (void);
+
+#endif