summaryrefslogtreecommitdiff
path: root/keyboards/octagon/v1/rules.mk
diff options
context:
space:
mode:
authorMechMerlin <30334081+mechmerlin@users.noreply.github.com>2017-12-20 16:54:07 -0800
committerJack Humbert <jack.humb@gmail.com>2017-12-20 19:54:07 -0500
commitc68597d9ad983c7d8f2b857f795037f2a441522d (patch)
tree1203027cb39d3dab4ab01f780c06ce7d46699ba8 /keyboards/octagon/v1/rules.mk
parent5ffec5d9b09333173d85abb228f38225388938ca (diff)
Octagon V1 Support (Port) (#2184)
* Preliminary commit for Octagon V1 support This is essentially a cp -R v2 v1 with a few things changed to get it to compile and build. * The Octagon V1 supports up to 84 keys as opposed to the V2 which supports up to 86. This commit changes the keymap to match it. * Temporary default keymap just to get things to compile * Update readme file * Fix switch matrix * Fix underglow lighting option * Fix keymap to take care of shifted columns * Fix keymap formatting * Remove un-needed files left over from rasmusx * Make Octagon V1 have its own keymap directory with default keymap * Make Octagon V2 have its own keymap directory with default keymap * Cleanups and readme edits
Diffstat (limited to 'keyboards/octagon/v1/rules.mk')
-rw-r--r--keyboards/octagon/v1/rules.mk72
1 files changed, 72 insertions, 0 deletions
diff --git a/keyboards/octagon/v1/rules.mk b/keyboards/octagon/v1/rules.mk
new file mode 100644
index 0000000000..a08695b504
--- /dev/null
+++ b/keyboards/octagon/v1/rules.mk
@@ -0,0 +1,72 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= no # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no # Console for debug(+400)
+COMMAND_ENABLE ?= yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= yes # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE ?= no # Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no # Audio output on port C6
+FAUXCLICKY_ENABLE ?= no # Use buzzer to emulate clicky switches
+RGBLIGHT_ENABLE = yes
+
+CUSTOM_MATRIX = yes
+SRC += matrix.c \
+