summaryrefslogtreecommitdiff
path: root/keyboards/gingham
diff options
context:
space:
mode:
authorfauxpark <fauxpark@gmail.com>2019-09-08 01:24:19 +1000
committerDrashna Jaelre <drashna@live.com>2019-09-07 08:24:19 -0700
commit490a13a02e0e247d07644a64f6df7e4ec9a628a3 (patch)
treebac64a2f4056360c28d15a9022c4d576e2bf58ee /keyboards/gingham
parent0d94730da05c9ba1375357cebedd54648463b0b8 (diff)
Add 328P to mcu_selection.mk (#6682)
Diffstat (limited to 'keyboards/gingham')
-rw-r--r--keyboards/gingham/rules.mk47
1 files changed, 0 insertions, 47 deletions
diff --git a/keyboards/gingham/rules.mk b/keyboards/gingham/rules.mk
index 83f424ba03..9afbd09644 100644
--- a/keyboards/gingham/rules.mk
+++ b/keyboards/gingham/rules.mk
@@ -3,42 +3,6 @@ SRC = matrix.c \
# MCU name
MCU = atmega328p
-PROTOCOL = VUSB
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Bootloader selection
# Teensy halfkay
@@ -51,14 +15,6 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# This uses usbaspbootloader
BOOTLOADER = USBasp
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-
# Flash program via avrdude, but default command is not suitable.
# You can use plaid:default:program
PROGRAM_CMD = avrdude -c usbasp -p m328p -U flash:w:$(BUILD_DIR)/$(TARGET).hex
@@ -87,7 +43,4 @@ AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
CUSTOM_MATRIX = yes