summaryrefslogtreecommitdiff
path: root/keyboard/hhkb
diff options
context:
space:
mode:
authortmk <nobody@nowhere>2012-06-30 13:26:09 +0900
committertmk <nobody@nowhere>2012-06-30 13:26:09 +0900
commit2c5d3ac76f0ef3c72aa0416aef8b775864b50eb1 (patch)
treeaf3e7bc1cdf3aaea222eff9685ae45bd12a4bd23 /keyboard/hhkb
parentf427529a30487de45ebfbe6fbba9c290738878ab (diff)
Add Makefile.lufa to keyboard/hhkb and hbkb.
Diffstat (limited to 'keyboard/hhkb')
-rw-r--r--keyboard/hhkb/Makefile.lufa119
-rw-r--r--keyboard/hhkb/Makefile.pjrc7
-rw-r--r--keyboard/hhkb/config.h (renamed from keyboard/hhkb/config_pjrc.h)5
-rw-r--r--keyboard/hhkb/matrix.c10
4 files changed, 133 insertions, 8 deletions
diff --git a/keyboard/hhkb/Makefile.lufa b/keyboard/hhkb/Makefile.lufa
new file mode 100644
index 0000000000..cdd68f40ab
--- /dev/null
+++ b/keyboard/hhkb/Makefile.lufa
@@ -0,0 +1,119 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = hhkb_lufa
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC += keymap.c \
+ matrix.c \
+ led.c
+
+CONFIG_H = config.h
+
+
+# MCU name
+MCU = at90usb1286
+#MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Build Options
+# comment out to disable the options.
+#
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+#NKRO_ENABLE = yes # USB Nkey Rollover
+#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
+
+
+# Boot Section Size in bytes
+# Teensy halfKay 512
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+#OPT_DEFS += -DBOOT_SIZE=4096
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/hhkb/Makefile.pjrc b/keyboard/hhkb/Makefile.pjrc
index f6d133eae4..f8836a2ca1 100644
--- a/keyboard/hhkb/Makefile.pjrc
+++ b/keyboard/hhkb/Makefile.pjrc
@@ -13,12 +13,11 @@ TOP_DIR = ../..
TARGET_DIR = .
# keyboard dependent files
-SRC = main.c \
- keymap.c \
+SRC = keymap.c \
matrix.c \
led.c
-CONFIG_H = config_pjrc.h
+CONFIG_H = config.h
# MCU name, you MUST set this to match the board you are using
@@ -53,8 +52,8 @@ PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
# Search Path
VPATH = $(TARGET_DIR)
+VPATH = $(TOP_DIR)
include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/protocol.mk
include $(TOP_DIR)/common.mk
include $(TOP_DIR)/rules.mk
diff --git a/keyboard/hhkb/config_pjrc.h b/keyboard/hhkb/config.h
index fffe3522c7..91446466fe 100644
--- a/keyboard/hhkb/config_pjrc.h
+++ b/keyboard/hhkb/config.h
@@ -21,11 +21,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* controller configuration */
#include "controller_teensy.h"
+
#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0xCAFE
+#define PRODUCT_ID 0xCAFF
#define DEVICE_VER 0x0101
#define MANUFACTURER t.m.k.
#define PRODUCT HHKB mod
+
+
#define DESCRIPTION t.m.k. keyboard firmware for HHKB mod
diff --git a/keyboard/hhkb/matrix.c b/keyboard/hhkb/matrix.c
index 350066b904..79d2d98731 100644
--- a/keyboard/hhkb/matrix.c
+++ b/keyboard/hhkb/matrix.c
@@ -68,8 +68,8 @@ static bool matrix_has_ghost_in_row(uint8_t row);
// key: on: 0/off: 1
// prev: unknown: output previous key state(negated)?
-#ifdef HOST_PJRC
-// Ports for Teensy
+#if defined(__AVR_AT90USB1286__)
+// Ports for Teensy++
// row: PB0-2
// col: PB3-5,6
// key: PE6(pull-uped)
@@ -90,7 +90,8 @@ static bool matrix_has_ghost_in_row(uint8_t row);
#define KEY_PREV_OFF() (PORTE &= ~(1<<7))
#define KEY_POWER_ON()
#define KEY_POWER_OFF()
-#else
+
+#elif defined(__AVR_ATmega328P__)
// Ports for V-USB
// key: PB0(pull-uped)
// prev: PB1
@@ -126,6 +127,9 @@ static bool matrix_has_ghost_in_row(uint8_t row);
DDRC &= ~0x0F; \
PORTC &= ~0x0F; \
} while (0)
+
+#else
+# error "define code for matrix scan"
#endif