clang-format changes

author: skullY <skullydazed@gmail.com> 2019-08-30 11:19:03 -0700
committer: skullydazed <skullydazed@users.noreply.github.com> 2019-08-30 15:01:52 -0700
commit: b624f32f944acdc59dcb130674c09090c5c404cb (patch)
tree: bc13adbba137d122d9a2c2fb2fafcbb08ac10e25 /drivers
parent: 61af76a10d00aba185b8338604171de490a13e3b (diff)
57 files changed, 4882 insertions, 7001 deletions
diff --git a/drivers/arm/i2c_master.c b/drivers/arm/i2c_master.c
index cba5a1c679..18068d3a6d 100644
--- a/drivers/arm/i2c_master.c
+++ b/drivers/arm/i2c_master.c
@@ -34,98 +34,83 @@ static uint8_t i2c_address;
 
 static const I2CConfig i2cconfig = {
 #ifdef USE_I2CV1
-  I2C1_OPMODE,
-  I2C1_CLOCK_SPEED,
-  I2C1_DUTY_CYCLE,
+    I2C1_OPMODE,
+    I2C1_CLOCK_SPEED,
+    I2C1_DUTY_CYCLE,
 #else
-  STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) |
-  STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) |
-  STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH)  | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL),
-  0,
-  0
+    STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) | STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) | STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH) | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL), 0, 0
 #endif
 };
 
 static i2c_status_t chibios_to_qmk(const msg_t* status) {
-  switch (*status) {
-    case I2C_NO_ERROR:
-      return I2C_STATUS_SUCCESS;
-    case I2C_TIMEOUT:
-      return I2C_STATUS_TIMEOUT;
-    // I2C_BUS_ERROR, I2C_ARBITRATION_LOST, I2C_ACK_FAILURE, I2C_OVERRUN, I2C_PEC_ERROR, I2C_SMB_ALERT
-    default:
-      return I2C_STATUS_ERROR;
-  }
+    switch (*status) {
+        case I2C_NO_ERROR:
+            return I2C_STATUS_SUCCESS;
+        case I2C_TIMEOUT:
+            return I2C_STATUS_TIMEOUT;
+        // I2C_BUS_ERROR, I2C_ARBITRATION_LOST, I2C_ACK_FAILURE, I2C_OVERRUN, I2C_PEC_ERROR, I2C_SMB_ALERT
+        default:
+            return I2C_STATUS_ERROR;
+    }
 }
 
-__attribute__ ((weak))
-void i2c_init(void)
-{
-  // Try releasing special pins for a short time
-  palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_INPUT);
-  palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_INPUT);
+__attribute__((weak)) void i2c_init(void) {
+    // Try releasing special pins for a short time
+    palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_INPUT);
+    palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_INPUT);
 
-  chThdSleepMilliseconds(10);
+    chThdSleepMilliseconds(10);
 
 #ifdef USE_I2CV1
-  palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_STM32_ALTERNATE_OPENDRAIN);
-  palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_STM32_ALTERNATE_OPENDRAIN);
+    palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_STM32_ALTERNATE_OPENDRAIN);
+    palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_STM32_ALTERNATE_OPENDRAIN);
 #else
-  palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
-  palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
+    palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
+    palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
 #endif
 
-  //i2cInit(); //This is invoked by halInit() so no need to redo it.
+    // i2cInit(); //This is invoked by halInit() so no need to redo it.
 }
 
-i2c_status_t i2c_start(uint8_t address)
-{
-  i2c_address = address;
-  i2cStart(&I2C_DRIVER, &i2cconfig);
-  return I2C_STATUS_SUCCESS;
+i2c_status_t i2c_start(uint8_t address) {
+    i2c_address = address;
+    i2cStart(&I2C_DRIVER, &i2cconfig);
+    return I2C_STATUS_SUCCESS;
 }
 
-i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout)
-{
-  i2c_address = address;
-  i2cStart(&I2C_DRIVER, &i2cconfig);
-  msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout));
-  return chibios_to_qmk(&status);
+i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) {
+    i2c_address = address;
+    i2cStart(&I2C_DRIVER, &i2cconfig);
+    msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout));
+    return chibios_to_qmk(&status);
 }
 
-i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
-{
-  i2c_address = address;
-  i2cStart(&I2C_DRIVER, &i2cconfig);
-  msg_t status = i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, MS2ST(timeout));
-  return chibios_to_qmk(&status);
+i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) {
+    i2c_address = address;
+    i2cStart(&I2C_DRIVER, &i2cconfig);
+    msg_t status = i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, MS2ST(timeout));
+    return chibios_to_qmk(&status);
 }
 
-i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout)
-{
-  i2c_address = devaddr;
-  i2cStart(&I2C_DRIVER, &i2cconfig);
+i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) {
+    i2c_address = devaddr;
+    i2cStart(&I2C_DRIVER, &i2cconfig);
 
-  uint8_t complete_packet[length + 1];
-  for(uint8_t i = 0; i < length; i++)
-  {
-    complete_packet[i+1] = data[i];
-  }
-  complete_packet[0] = regaddr;
+    uint8_t complete_packet[length + 1];
+    for (uint8_t i = 0; i < length; i++) {
+        complete_packet[i + 1] = data[i];
+    }
+    complete_packet[0] = regaddr;
 
-  msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout));
-  return chibios_to_qmk(&status);
+    msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout));
+    return chibios_to_qmk(&status);
 }
 
-i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
-{
-  i2c_address = devaddr;
-  i2cStart(&I2C_DRIVER, &i2cconfig);
-  msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), &regaddr, 1, data, length, MS2ST(timeout));
-  return chibios_to_qmk(&status);
+i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) {
+    i2c_address = devaddr;
+    i2cStart(&I2C_DRIVER, &i2cconfig);
+    msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), &regaddr, 1, data, length, MS2ST(timeout));
+    return chibios_to_qmk(&status);
 }
 
-void i2c_stop(void)
-{
-  i2cStop(&I2C_DRIVER);
-}
+void i2c_stop(void) { i2cStop(&I2C_DRIVER); }
diff --git a/drivers/arm/i2c_master.h b/drivers/arm/i2c_master.h
index c8afa31e28..b40fa0a910 100644
--- a/drivers/arm/i2c_master.h
+++ b/drivers/arm/i2c_master.h
@@ -27,84 +27,83 @@
 #include "ch.h"
 #include <hal.h>
 
-
 #if defined(STM32F1XX) || defined(STM32F1xx) || defined(STM32F2xx) || defined(STM32F4xx) || defined(STM32L0xx) || defined(STM32L1xx)
-    #define USE_I2CV1
+#    define USE_I2CV1
 #endif
 
 #ifdef I2C1_BANK
-    #define I2C1_SCL_BANK I2C1_BANK
-    #define I2C1_SDA_BANK I2C1_BANK
+#    define I2C1_SCL_BANK I2C1_BANK
+#    define I2C1_SDA_BANK I2C1_BANK
 #endif
 
 #ifndef I2C1_SCL_BANK
-    #define I2C1_SCL_BANK GPIOB
+#    define I2C1_SCL_BANK GPIOB
 #endif
 
 #ifndef I2C1_SDA_BANK
-    #define I2C1_SDA_BANK GPIOB
+#    define I2C1_SDA_BANK GPIOB
 #endif
 
 #ifndef I2C1_SCL
-    #define I2C1_SCL 6
+#    define I2C1_SCL 6
 #endif
 #ifndef I2C1_SDA
-    #define I2C1_SDA 7
+#    define I2C1_SDA 7
 #endif
 
 #ifdef USE_I2CV1
-    #ifndef I2C1_OPMODE
-        #define I2C1_OPMODE OPMODE_I2C
-    #endif
-    #ifndef I2C1_CLOCK_SPEED
-        #define I2C1_CLOCK_SPEED 100000 /* 400000 */
-    #endif
-    #ifndef I2C1_DUTY_CYCLE
-        #define I2C1_DUTY_CYCLE STD_DUTY_CYCLE /* FAST_DUTY_CYCLE_2 */
-    #endif
+#    ifndef I2C1_OPMODE
+#        define I2C1_OPMODE OPMODE_I2C
+#    endif
+#    ifndef I2C1_CLOCK_SPEED
+#        define I2C1_CLOCK_SPEED 100000 /* 400000 */
+#    endif
+#    ifndef I2C1_DUTY_CYCLE
+#        define I2C1_DUTY_CYCLE STD_DUTY_CYCLE /* FAST_DUTY_CYCLE_2 */
+#    endif
 #else
-    // The default PAL alternate modes are used to signal that the pins are used for I2C
-    #ifndef I2C1_SCL_PAL_MODE
-        #define I2C1_SCL_PAL_MODE 4
-    #endif
-    #ifndef I2C1_SDA_PAL_MODE
-        #define I2C1_SDA_PAL_MODE 4
-    #endif
+// The default PAL alternate modes are used to signal that the pins are used for I2C
+#    ifndef I2C1_SCL_PAL_MODE
+#        define I2C1_SCL_PAL_MODE 4
+#    endif
+#    ifndef I2C1_SDA_PAL_MODE
+#        define I2C1_SDA_PAL_MODE 4
+#    endif
 
-    // The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock
-    // For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
-    #ifndef I2C1_TIMINGR_PRESC
-        #define I2C1_TIMINGR_PRESC 15U
-    #endif
-    #ifndef I2C1_TIMINGR_SCLDEL
-        #define I2C1_TIMINGR_SCLDEL 4U
-    #endif
-    #ifndef I2C1_TIMINGR_SDADEL
-        #define I2C1_TIMINGR_SDADEL 2U
-    #endif
-    #ifndef I2C1_TIMINGR_SCLH
-        #define I2C1_TIMINGR_SCLH 15U
-    #endif
-    #ifndef I2C1_TIMINGR_SCLL
-        #define I2C1_TIMINGR_SCLL 21U
-    #endif
+// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock
+// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
+#    ifndef I2C1_TIMINGR_PRESC
+#        define I2C1_TIMINGR_PRESC 15U
+#    endif
+#    ifndef I2C1_TIMINGR_SCLDEL
+#        define I2C1_TIMINGR_SCLDEL 4U
+#    endif
+#    ifndef I2C1_TIMINGR_SDADEL
+#        define I2C1_TIMINGR_SDADEL 2U
+#    endif
+#    ifndef I2C1_TIMINGR_SCLH
+#        define I2C1_TIMINGR_SCLH 15U
+#    endif
+#    ifndef I2C1_TIMINGR_SCLL
+#        define I2C1_TIMINGR_SCLL 21U
+#    endif
 #endif
 
 #ifndef I2C_DRIVER
-  #define I2C_DRIVER I2CD1
+#    define I2C_DRIVER I2CD1
 #endif
 
 typedef int16_t i2c_status_t;
 
 #define I2C_STATUS_SUCCESS (0)
-#define I2C_STATUS_ERROR   (-1)
+#define I2C_STATUS_ERROR (-1)
 #define I2C_STATUS_TIMEOUT (-2)
 
-void i2c_init(void);
+void         i2c_init(void);
 i2c_status_t i2c_start(uint8_t address);
 i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout);
 i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
-i2c_status_t i2c_transmit_receive(uint8_t address, uint8_t * tx_body, uint16_t tx_length, uint8_t * rx_body, uint16_t rx_length);
+i2c_status_t i2c_transmit_receive(uint8_t address, uint8_t* tx_body, uint16_t tx_length, uint8_t* rx_body, uint16_t rx_length);
 i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout);
 i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
-void i2c_stop(void);
+void         i2c_stop(void);
diff --git a/drivers/avr/analog.c b/drivers/avr/analog.c
index 1ec38df75d..1a8da4261d 100644
--- a/drivers/avr/analog.c
+++ b/drivers/avr/analog.c
@@ -21,49 +21,38 @@
 #include <stdint.h>
 #include "analog.h"
 
+static uint8_t aref = (1 << REFS0);  // default to AREF = Vcc
 
-static uint8_t aref = (1<<REFS0); // default to AREF = Vcc
-
-
-void analogReference(uint8_t mode)
-{
-	aref = mode & 0xC0;
-}
-
+void analogReference(uint8_t mode) { aref = mode & 0xC0; }
 
 // Arduino compatible pin input
-int16_t analogRead(uint8_t pin)
-{
+int16_t analogRead(uint8_t pin) {
 #if defined(__AVR_ATmega32U4__)
-	static const uint8_t PROGMEM pin_to_mux[] = {
-		0x00, 0x01, 0x04, 0x05, 0x06, 0x07,
-		0x25, 0x24, 0x23, 0x22, 0x21, 0x20};
-	if (pin >= 12) return 0;
-	return adc_read(pgm_read_byte(pin_to_mux + pin));
+    static const uint8_t PROGMEM pin_to_mux[] = {0x00, 0x01, 0x04, 0x05, 0x06, 0x07, 0x25, 0x24, 0x23, 0x22, 0x21, 0x20};
+    if (pin >= 12) return 0;
+    return adc_read(pgm_read_byte(pin_to_mux + pin));
 #elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
-	if (pin >= 8) return 0;
-	return adc_read(pin);
+    if (pin >= 8) return 0;
+    return adc_read(pin);
 #else
-	return 0;
+    return 0;
 #endif
 }
 
 // Mux input
-int16_t adc_read(uint8_t mux)
-{
+int16_t adc_read(uint8_t mux) {
 #if defined(__AVR_AT90USB162__)
-	return 0;
+    return 0;
 #else
-	uint8_t low;
-
-	ADCSRA = (1<<ADEN) | ADC_PRESCALER;		// enable ADC
-	ADCSRB = (1<<ADHSM) | (mux & 0x20);		// high speed mode
-	ADMUX = aref | (mux & 0x1F);			// configure mux input
-	ADCSRA = (1<<ADEN) | ADC_PRESCALER | (1<<ADSC);	// start the conversion
-	while (ADCSRA & (1<<ADSC)) ;			// wait for result
-	low = ADCL;					// must read LSB first
-	return (ADCH << 8) | low;			// must read MSB only once!
+    uint8_t low;
+
+    ADCSRA = (1 << ADEN) | ADC_PRESCALER;                // enable ADC
+    ADCSRB = (1 << ADHSM) | (mux & 0x20);                // high speed mode
+    ADMUX  = aref | (mux & 0x1F);                        // configure mux input
+    ADCSRA = (1 << ADEN) | ADC_PRESCALER | (1 << ADSC);  // start the conversion
+    while (ADCSRA & (1 << ADSC))
+        ;                      // wait for result
+    low = ADCL;                // must read LSB first
+    return (ADCH << 8) | low;  // must read MSB only once!
 #endif
 }
-
-
diff --git a/drivers/avr/analog.h b/drivers/avr/analog.h
index 8d93de7dc2..32452a1ec2 100644
--- a/drivers/avr/analog.h
+++ b/drivers/avr/analog.h
@@ -19,34 +19,34 @@
 
 #include <stdint.h>
 
-void analogReference(uint8_t mode);
+void    analogReference(uint8_t mode);
 int16_t analogRead(uint8_t pin);
 int16_t adc_read(uint8_t mux);
 
-#define ADC_REF_POWER     (1<<REFS0)
-#define ADC_REF_INTERNAL  ((1<<REFS1) | (1<<REFS0))
-#define ADC_REF_EXTERNAL  (0)
+#define ADC_REF_POWER (1 << REFS0)
+#define ADC_REF_INTERNAL ((1 << REFS1) | (1 << REFS0))
+#define ADC_REF_EXTERNAL (0)
 
 // These prescaler values are for high speed mode, ADHSM = 1
 #if F_CPU == 16000000L
-#define ADC_PRESCALER ((1<<ADPS2) | (1<<ADPS1))
+#    define ADC_PRESCALER ((1 << ADPS2) | (1 << ADPS1))
 #elif F_CPU == 8000000L
-#define ADC_PRESCALER ((1<<ADPS2) | (1<<ADPS0))
+#    define ADC_PRESCALER ((1 << ADPS2) | (1 << ADPS0))
 #elif F_CPU == 4000000L
-#define ADC_PRESCALER ((1<<ADPS2))
+#    define ADC_PRESCALER ((1 << ADPS2))
 #elif F_CPU == 2000000L
-#define ADC_PRESCALER ((1<<ADPS1) | (1<<ADPS0))
+#    define ADC_PRESCALER ((1 << ADPS1) | (1 << ADPS0))
 #elif F_CPU == 1000000L
-#define ADC_PRESCALER ((1<<ADPS1))
+#    define ADC_PRESCALER ((1 << ADPS1))
 #else
-#define ADC_PRESCALER ((1<<ADPS0))
+#    define ADC_PRESCALER ((1 << ADPS0))
 #endif
 
 // some avr-libc versions do not properly define ADHSM
 #if defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
-#if !defined(ADHSM)
-#define ADHSM (7)
-#endif
+#    if !defined(ADHSM)
+#        define ADHSM (7)
+#    endif
 #endif
 
 #endif
diff --git a/drivers/avr/apa102.c b/drivers/avr/apa102.c
index 55a0d57778..f4d97a1589 100755..100644
--- a/drivers/avr/apa102.c
+++ b/drivers/avr/apa102.c
@@ -1,24 +1,24 @@
 /*
-* APA102 lib V1.0a
-*
-* Controls APA102 RGB-LEDs
-* Author: Mikkel (Duckle29 on github)
-*
-* Dec 22th, 2017  v1.0a Initial Version
-*
-* This program is free software: you can redistribute it and/or modify
-* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation, either version 2 of the License, or
-* (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
+ * APA102 lib V1.0a
+ *
+ * Controls APA102 RGB-LEDs
+ * Author: Mikkel (Duckle29 on github)
+ *
+ * Dec 22th, 2017  v1.0a Initial Version
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 
 #include "apa102.h"
 #include <avr/interrupt.h>
@@ -27,75 +27,70 @@
 #include "debug.h"
 
 // Setleds for standard RGB
-void inline apa102_setleds(LED_TYPE *ledarray, uint16_t leds){
-  apa102_setleds_pin(ledarray,leds, _BV(RGB_DI_PIN & 0xF), _BV(RGB_CLK_PIN & 0xF));
-}
+void inline apa102_setleds(LED_TYPE *ledarray, uint16_t leds) { apa102_setleds_pin(ledarray, leds, _BV(RGB_DI_PIN & 0xF), _BV(RGB_CLK_PIN & 0xF)); }
 
-void static inline apa102_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask_DI, uint8_t pinmask_CLK){
-  pinMode(RGB_DI_PIN, PinDirectionOutput);
-  pinMode(RGB_CLK_PIN, PinDirectionOutput);
+void static inline apa102_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask_DI, uint8_t pinmask_CLK) {
+    pinMode(RGB_DI_PIN, PinDirectionOutput);
+    pinMode(RGB_CLK_PIN, PinDirectionOutput);
 
-  apa102_send_array((uint8_t*)ledarray,leds)
+    apa102_send_array((uint8_t *)ledarray, leds)
 }
 
-void apa102_send_array(uint8_t *data, uint16_t leds){ // Data is struct of 3 bytes. RGB - leds is number of leds in data
-  apa102_start_frame();
-  while(leds--){
-    apa102_send_frame(0xFF000000 | (data->b << 16) | (data->g << 8) | data->r);
-    data++;
-  }
-  apa102_end_frame(leds);
+void apa102_send_array(uint8_t *data, uint16_t leds) {  // Data is struct of 3 bytes. RGB - leds is number of leds in data
+    apa102_start_frame();
+    while (leds--) {
+        apa102_send_frame(0xFF000000 | (data->b << 16) | (data->g << 8) | data->r);
+        data++;
+    }
+    apa102_end_frame(leds);
 }
 
-void apa102_send_frame(uint32_t frame){
-  for(uint32_t i=0xFF; i>0;){
-    apa102_send_byte(frame & i);
-    i = i << 8;
-  }
+void apa102_send_frame(uint32_t frame) {
+    for (uint32_t i = 0xFF; i > 0;) {
+        apa102_send_byte(frame & i);
+        i = i << 8;
+    }
 }
 
-void apa102_start_frame(){
-  apa102_send_frame(0);
-}
+void apa102_start_frame() { apa102_send_frame(0); }
 
-void apa102_end_frame(uint16_t leds)
-{
-  // This function has been taken from: https://github.com/pololu/apa102-arduino/blob/master/APA102.h
-  // and adapted. The code is MIT licensed. I think thats compatible?
+void apa102_end_frame(uint16_t leds) {
+    // This function has been taken from: https://github.com/pololu/apa102-arduino/blob/master/APA102.h
+    // and adapted. The code is MIT licensed. I think thats compatible?
 
-  // We need to send some more bytes to ensure that all the LEDs in the
-  // chain see their new color and start displaying it.
-  //
-  // The data stream seen by the last LED in the chain will be delayed by
-  // (count - 1) clock edges, because each LED before it inverts the clock
-  // line and delays the data by one clock edge.  Therefore, to make sure
-  // the last LED actually receives the data we wrote, the number of extra
-  // edges we send at the end of the frame must be at least (count - 1).
-  // For the APA102C, that is sufficient.
-  //
-  // The SK9822 only updates after it sees 32 zero bits followed by one more
-  // rising edge.  To avoid having the update time depend on the color of
-  // the last LED, we send a dummy 0xFF byte.  (Unfortunately, this means
-  // that partial updates of the beginning of an LED strip are not possible;
-  // the LED after the last one you are trying to update will be black.)
-  // After that, to ensure that the last LED in the chain sees 32 zero bits
-  // and a rising edge, we need to send at least 65 + (count - 1) edges.  It
-  // is sufficent and simpler to just send (5 + count/16) bytes of zeros.
-  //
-  // We are ignoring the specification for the end frame in the APA102/SK9822
-  // datasheets because it does not actually ensure that all the LEDs will
-  // start displaying their new colors right away.
+    // We need to send some more bytes to ensure that all the LEDs in the
+    // chain see their new color and start displaying it.
+    //
+    // The data stream seen by the last LED in the chain will be delayed by
+    // (count - 1) clock edges, because each LED before it inverts the clock
+    // line and delays the data by one clock edge.  Therefore, to make sure
+    // the last LED actually receives the data we wrote, the number of extra
+    // edges we send at the end of the frame must be at least (count - 1).
+    // For the APA102C, that is sufficient.
+    //
+    // The SK9822 only updates after it sees 32 zero bits followed by one more
+    // rising edge.  To avoid having the update time depend on the color of
+    // the last LED, we send a dummy 0xFF byte.  (Unfortunately, this means
+    // that partial updates of the beginning of an LED strip are not possible;
+    // the LED after the last one you are trying to update will be black.)
+    // After that, to ensure that the last LED in the chain sees 32 zero bits
+    // and a rising edge, we need to send at least 65 + (count - 1) edges.  It
+    // is sufficent and simpler to just send (5 + count/16) bytes of zeros.
+    //
+    // We are ignoring the specification for the end frame in the APA102/SK9822
+    // datasheets because it does not actually ensure that all the LEDs will
+    // start displaying their new colors right away.
 
-  apa102_send_byte(0xFF);
-  for (uint16_t i = 0; i < 5 + leds / 16; i++){
-    apa102_send_byte(0);
-  }
+    apa102_send_byte(0xFF);
+    for (uint16_t i = 0; i < 5 + leds / 16; i++) {
+        apa102_send_byte(0);
+    }
 }
 
-void apa102_send_byte(uint8_t byte){
-  uint8_t i;
-  for (i = 0; i < 8; i++){
+void apa102_send_byte(uint8_t byte) {
+    uint8_t i;
+    for (i = 0; i < 8; i++) {
     digitalWrite(RGB_DI_PIN, !!(byte & (1 << (7-i)));
     digitalWrite(RGB_CLK_PIN, PinLevelHigh);
-  }
+    }
 }
diff --git a/drivers/avr/apa102.h b/drivers/avr/apa102.h
index 5d852e0673..d4c1e18ee1 100755..100644
--- a/drivers/avr/apa102.h
+++ b/drivers/avr/apa102.h
@@ -27,7 +27,6 @@
 
 #include "color.h"
 
-
 /* User Interface
  *
  * Input:
@@ -41,6 +40,6 @@
  *         - Wait 50�s to reset the LEDs
  */
 
-void apa102_setleds     (LED_TYPE *ledarray, uint16_t number_of_leds);
-void apa102_setleds_pin (LED_TYPE *ledarray, uint16_t number_of_leds,uint8_t pinmask);
+void apa102_setleds(LED_TYPE *ledarray, uint16_t number_of_leds);
+void apa102_setleds_pin(LED_TYPE *ledarray, uint16_t number_of_leds, uint8_t pinmask);
 void apa102_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds);
diff --git a/drivers/avr/glcdfont.c b/drivers/avr/glcdfont.c
index 6f88bd23a7..2c332ea6db 100644
--- a/drivers/avr/glcdfont.c
+++ b/drivers/avr/glcdfont.c
@@ -5,272 +5,30 @@
 #define FONT5X7_H
 
 #ifdef __AVR__
- #include <avr/io.h>
- #include <avr/pgmspace.h>
+#    include <avr/io.h>
+#    include <avr/pgmspace.h>
 #elif defined(ESP8266)
- #include <pgmspace.h>
+#    include <pgmspace.h>
 #else
- #define PROGMEM
+#    define PROGMEM
 #endif
 
 // Standard ASCII 5x7 font
 
 static const unsigned char font[] PROGMEM = {
-	0x00, 0x00, 0x00, 0x00, 0x00,
-	0x3E, 0x5B, 0x4F, 0x5B, 0x3E,
-	0x3E, 0x6B, 0x4F, 0x6B, 0x3E,
-	0x1C, 0x3E, 0x7C, 0x3E, 0x1C,
-	0x18, 0x3C, 0x7E, 0x3C, 0x18,
-	0x1C, 0x57, 0x7D, 0x57, 0x1C,
-	0x1C, 0x5E, 0x7F, 0x5E, 0x1C,
-	0x00, 0x18, 0x3C, 0x18, 0x00,
-	0xFF, 0xE7, 0xC3, 0xE7, 0xFF,
-	0x00, 0x18, 0x24, 0x18, 0x00,
-	0xFF, 0xE7, 0xDB, 0xE7, 0xFF,
-	0x30, 0x48, 0x3A, 0x06, 0x0E,
-	0x26, 0x29, 0x79, 0x29, 0x26,
-	0x40, 0x7F, 0x05, 0x05, 0x07,
-	0x40, 0x7F, 0x05, 0x25, 0x3F,
-	0x5A, 0x3C, 0xE7, 0x3C, 0x5A,
-	0x7F, 0x3E, 0x1C, 0x1C, 0x08,
-	0x08, 0x1C, 0x1C, 0x3E, 0x7F,
-	0x14, 0x22, 0x7F, 0x22, 0x14,
-	0x5F, 0x5F, 0x00, 0x5F, 0x5F,
-	0x06, 0x09, 0x7F, 0x01, 0x7F,
-	0x00, 0x66, 0x89, 0x95, 0x6A,
-	0x60, 0x60, 0x60, 0x60, 0x60,
-	0x94, 0xA2, 0xFF, 0xA2, 0x94,
-	0x08, 0x04, 0x7E, 0x04, 0x08,
-	0x10, 0x20, 0x7E, 0x20, 0x10,
-	0x08, 0x08, 0x2A, 0x1C, 0x08,
-	0x08, 0x1C, 0x2A, 0x08, 0x08,
-	0x1E, 0x10, 0x10, 0x10, 0x10,
-	0x0C, 0x1E, 0x0C, 0x1E, 0x0C,
-	0x30, 0x38, 0x3E, 0x38, 0x30,
-	0x06, 0x0E, 0x3E, 0x0E, 0x06,
-	0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x5F, 0x00, 0x00,
-	0x00, 0x07, 0x00, 0x07, 0x00,
-	0x14, 0x7F, 0x14, 0x7F, 0x14,
-	0x24, 0x2A, 0x7F, 0x2A, 0x12,
-	0x23, 0x13, 0x08, 0x64, 0x62,
-	0x36, 0x49, 0x56, 0x20, 0x50,
-	0x00, 0x08, 0x07, 0x03, 0x00,
-	0x00, 0x1C, 0x22, 0x41, 0x00,
-	0x00, 0x41, 0x22, 0x1C, 0x00,
-	0x2A, 0x1C, 0x7F, 0x1C, 0x2A,
-	0x08, 0x08, 0x3E, 0x08, 0x08,
-	0x00, 0x80, 0x70, 0x30, 0x00,
-	0x08, 0x08, 0x08, 0x08, 0x08,
-	0x00, 0x00, 0x60, 0x60, 0x00,
-	0x20, 0x10, 0x08, 0x04, 0x02,
-	0x3E, 0x51, 0x49, 0x45, 0x3E,
-	0x00, 0x42, 0x7F, 0x40, 0x00,
-	0x72, 0x49, 0x49, 0x49, 0x46,
-	0x21, 0x41, 0x49, 0x4D, 0x33,
-	0x18, 0x14, 0x12, 0x7F, 0x10,
-	0x27, 0x45, 0x45, 0x45, 0x39,
-	0x3C, 0x4A, 0x49, 0x49, 0x31,
-	0x41, 0x21, 0x11, 0x09, 0x07,
-	0x36, 0x49, 0x49, 0x49, 0x36,
-	0x46, 0x49, 0x49, 0x29, 0x1E,
-	0x00, 0x00, 0x14, 0x00, 0x00,
-	0x00, 0x40, 0x34, 0x00, 0x00,
-	0x00, 0x08, 0x14, 0x22, 0x41,
-	0x14, 0x14, 0x14, 0x14, 0x14,
-	0x00, 0x41, 0x22, 0x14, 0x08,
-	0x02, 0x01, 0x59, 0x09, 0x06,
-	0x3E, 0x41, 0x5D, 0x59, 0x4E,
-	0x7C, 0x12, 0x11, 0x12, 0x7C,
-	0x7F, 0x49, 0x49, 0x49, 0x36,
-	0x3E, 0x41, 0x41, 0x41, 0x22,
-	0x7F, 0x41, 0x41, 0x41, 0x3E,
-	0x7F, 0x49, 0x49, 0x49, 0x41,
-	0x7F, 0x09, 0x09, 0x09, 0x01,
-	0x3E, 0x41, 0x41, 0x51, 0x73,
-	0x7F, 0x08, 0x08, 0x08, 0x7F,
-	0x00, 0x41, 0x7F, 0x41, 0x00,
-	0x20, 0x40, 0x41, 0x3F, 0x01,
-	0x7F, 0x08, 0x14, 0x22, 0x41,
-	0x7F, 0x40, 0x40, 0x40, 0x40,
-	0x7F, 0x02, 0x1C, 0x02, 0x7F,
-	0x7F, 0x04, 0x08, 0x10, 0x7F,
-	0x3E, 0x41, 0x41, 0x41, 0x3E,
-	0x7F, 0x09, 0x09, 0x09, 0x06,
-	0x3E, 0x41, 0x51, 0x21, 0x5E,
-	0x7F, 0x09, 0x19, 0x29, 0x46,
-	0x26, 0x49, 0x49, 0x49, 0x32,
-	0x03, 0x01, 0x7F, 0x01, 0x03,
-	0x3F, 0x40, 0x40, 0x40, 0x3F,
-	0x1F, 0x20, 0x40, 0x20, 0x1F,
-	0x3F, 0x40, 0x38, 0x40, 0x3F,
-	0x63, 0x14, 0x08, 0x14, 0x63,
-	0x03, 0x04, 0x78, 0x04, 0x03,
-	0x61, 0x59, 0x49, 0x4D, 0x43,
-	0x00, 0x7F, 0x41, 0x41, 0x41,
-	0x02, 0x04, 0x08, 0x10, 0x20,
-	0x00, 0x41, 0x41, 0x41, 0x7F,
-	0x04, 0x02, 0x01, 0x02, 0x04,
-	0x40, 0x40, 0x40, 0x40, 0x40,
-	0x00, 0x03, 0x07, 0x08, 0x00,
-	0x20, 0x54, 0x54, 0x78, 0x40,
-	0x7F, 0x28, 0x44, 0x44, 0x38,
-	0x38, 0x44, 0x44, 0x44, 0x28,
-	0x38, 0x44, 0x44, 0x28, 0x7F,
-	0x38, 0x54, 0x54, 0x54, 0x18,
-	0x00, 0x08, 0x7E, 0x09, 0x02,
-	0x18, 0xA4, 0xA4, 0x9C, 0x78,
-	0x7F, 0x08, 0x04, 0x04, 0x78,
-	0x00, 0x44, 0x7D, 0x40, 0x00,
-	0x20, 0x40, 0x40, 0x3D, 0x00,
-	0x7F, 0x10, 0x28, 0x44, 0x00,
-	0x00, 0x41, 0x7F, 0x40, 0x00,
-	0x7C, 0x04, 0x78, 0x04, 0x78,
-	0x7C, 0x08, 0x04, 0x04, 0x78,
-	0x38, 0x44, 0x44, 0x44, 0x38,
-	0xFC, 0x18, 0x24, 0x24, 0x18,
-	0x18, 0x24, 0x24, 0x18, 0xFC,
-	0x7C, 0x08, 0x04, 0x04, 0x08,
-	0x48, 0x54, 0x54, 0x54, 0x24,
-	0x04, 0x04, 0x3F, 0x44, 0x24,
-	0x3C, 0x40, 0x40, 0x20, 0x7C,
-	0x1C, 0x20, 0x40, 0x20, 0x1C,
-	0x3C, 0x40, 0x30, 0x40, 0x3C,
-	0x44, 0x28, 0x10, 0x28, 0x44,
-	0x4C, 0x90, 0x90, 0x90, 0x7C,
-	0x44, 0x64, 0x54, 0x4C, 0x44,
-	0x00, 0x08, 0x36, 0x41, 0x00,
-	0x00, 0x00, 0x77, 0x00, 0x00,
-	0x00, 0x41, 0x36, 0x08, 0x00,
-	0x02, 0x01, 0x02, 0x04, 0x02,
-	0x3C, 0x26, 0x23, 0x26, 0x3C,
-	0x1E, 0xA1, 0xA1, 0x61, 0x12,
-	0x3A, 0x40, 0x40, 0x20, 0x7A,
-	0x38, 0x54, 0x54, 0x55, 0x59,
-	0x21, 0x55, 0x55, 0x79, 0x41,
-	0x22, 0x54, 0x54, 0x78, 0x42, // a-umlaut
-	0x21, 0x55, 0x54, 0x78, 0x40,
-	0x20, 0x54, 0x55, 0x79, 0x40,
-	0x0C, 0x1E, 0x52, 0x72, 0x12,
-	0x39, 0x55, 0x55, 0x55, 0x59,
-	0x39, 0x54, 0x54, 0x54, 0x59,
-	0x39, 0x55, 0x54, 0x54, 0x58,
-	0x00, 0x00, 0x45, 0x7C, 0x41,
-	0x00, 0x02, 0x45, 0x7D, 0x42,
-	0x00, 0x01, 0x45, 0x7C, 0x40,
-	0x7D, 0x12, 0x11, 0x12, 0x7D, // A-umlaut
-	0xF0, 0x28, 0x25, 0x28, 0xF0,
-	0x7C, 0x54, 0x55, 0x45, 0x00,
-	0x20, 0x54, 0x54, 0x7C, 0x54,
-	0x7C, 0x0A, 0x09, 0x7F, 0x49,
-	0x32, 0x49, 0x49, 0x49, 0x32,
-	0x3A, 0x44, 0x44, 0x44, 0x3A, // o-umlaut
-	0x32, 0x4A, 0x48, 0x48, 0x30,
-	0x3A, 0x41, 0x41, 0x21, 0x7A,
-	0x3A, 0x42, 0x40, 0x20, 0x78,
-	0x00, 0x9D, 0xA0, 0xA0, 0x7D,
-	0x3D, 0x42, 0x42, 0x42, 0x3D, // O-umlaut
-	0x3D, 0x40, 0x40, 0x40, 0x3D,
-	0x3C, 0x24, 0xFF, 0x24, 0x24,
-	0x48, 0x7E, 0x49, 0x43, 0x66,
-	0x2B, 0x2F, 0xFC, 0x2F, 0x2B,
-	0xFF, 0x09, 0x29, 0xF6, 0x20,
-	0xC0, 0x88, 0x7E, 0x09, 0x03,
-	0x20, 0x54, 0x54, 0x79, 0x41,
-	0x00, 0x00, 0x44, 0x7D, 0x41,
-	0x30, 0x48, 0x48, 0x4A, 0x32,
-	0x38, 0x40, 0x40, 0x22, 0x7A,
-	0x00, 0x7A, 0x0A, 0x0A, 0x72,
-	0x7D, 0x0D, 0x19, 0x31, 0x7D,
-	0x26, 0x29, 0x29, 0x2F, 0x28,
-	0x26, 0x29, 0x29, 0x29, 0x26,
-	0x30, 0x48, 0x4D, 0x40, 0x20,
-	0x38, 0x08, 0x08, 0x08, 0x08,
-	0x08, 0x08, 0x08, 0x08, 0x38,
-	0x2F, 0x10, 0xC8, 0xAC, 0xBA,
-	0x2F, 0x10, 0x28, 0x34, 0xFA,
-	0x00, 0x00, 0x7B, 0x00, 0x00,
-	0x08, 0x14, 0x2A, 0x14, 0x22,
-	0x22, 0x14, 0x2A, 0x14, 0x08,
-	0x55, 0x00, 0x55, 0x00, 0x55, // #176 (25% block) missing in old code
-	0xAA, 0x55, 0xAA, 0x55, 0xAA, // 50% block
-	0xFF, 0x55, 0xFF, 0x55, 0xFF, // 75% block
-	0x00, 0x00, 0x00, 0xFF, 0x00,
-	0x10, 0x10, 0x10, 0xFF, 0x00,
-	0x14, 0x14, 0x14, 0xFF, 0x00,
-	0x10, 0x10, 0xFF, 0x00, 0xFF,
-	0x10, 0x10, 0xF0, 0x10, 0xF0,
-	0x14, 0x14, 0x14, 0xFC, 0x00,
-	0x14, 0x14, 0xF7, 0x00, 0xFF,
-	0x00, 0x00, 0xFF, 0x00, 0xFF,
-	0x14, 0x14, 0xF4, 0x04, 0xFC,
-	0x14, 0x14, 0x17, 0x10, 0x1F,
-	0x10, 0x10, 0x1F, 0x10, 0x1F,
-	0x14, 0x14, 0x14, 0x1F, 0x00,
-	0x10, 0x10, 0x10, 0xF0, 0x00,
-	0x00, 0x00, 0x00, 0x1F, 0x10,
-	0x10, 0x10, 0x10, 0x1F, 0x10,
-	0x10, 0x10, 0x10, 0xF0, 0x10,
-	0x00, 0x00, 0x00, 0xFF, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0xFF, 0x10,
-	0x00, 0x00, 0x00, 0xFF, 0x14,
-	0x00, 0x00, 0xFF, 0x00, 0xFF,
-	0x00, 0x00, 0x1F, 0x10, 0x17,
-	0x00, 0x00, 0xFC, 0x04, 0xF4,
-	0x14, 0x14, 0x17, 0x10, 0x17,
-	0x14, 0x14, 0xF4, 0x04, 0xF4,
-	0x00, 0x00, 0xFF, 0x00, 0xF7,
-	0x14, 0x14, 0x14, 0x14, 0x14,
-	0x14, 0x14, 0xF7, 0x00, 0xF7,
-	0x14, 0x14, 0x14, 0x17, 0x14,
-	0x10, 0x10, 0x1F, 0x10, 0x1F,
-	0x14, 0x14, 0x14, 0xF4, 0x14,
-	0x10, 0x10, 0xF0, 0x10, 0xF0,
-	0x00, 0x00, 0x1F, 0x10, 0x1F,
-	0x00, 0x00, 0x00, 0x1F, 0x14,
-	0x00, 0x00, 0x00, 0xFC, 0x14,
-	0x00, 0x00, 0xF0, 0x10, 0xF0,
-	0x10, 0x10, 0xFF, 0x10, 0xFF,
-	0x14, 0x14, 0x14, 0xFF, 0x14,
-	0x10, 0x10, 0x10, 0x1F, 0x00,
-	0x00, 0x00, 0x00, 0xF0, 0x10,
-	0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-	0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
-	0xFF, 0xFF, 0xFF, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0xFF, 0xFF,
-	0x0F, 0x0F, 0x0F, 0x0F, 0x0F,
-	0x38, 0x44, 0x44, 0x38, 0x44,
-	0xFC, 0x4A, 0x4A, 0x4A, 0x34, // sharp-s or beta
-	0x7E, 0x02, 0x02, 0x06, 0x06,
-	0x02, 0x7E, 0x02, 0x7E, 0x02,
-	0x63, 0x55, 0x49, 0x41, 0x63,
-	0x38, 0x44, 0x44, 0x3C, 0x04,
-	0x40, 0x7E, 0x20, 0x1E, 0x20,
-	0x06, 0x02, 0x7E, 0x02, 0x02,
-	0x99, 0xA5, 0xE7, 0xA5, 0x99,
-	0x1C, 0x2A, 0x49, 0x2A, 0x1C,
-	0x4C, 0x72, 0x01, 0x72, 0x4C,
-	0x30, 0x4A, 0x4D, 0x4D, 0x30,
-	0x30, 0x48, 0x78, 0x48, 0x30,
-	0xBC, 0x62, 0x5A, 0x46, 0x3D,
-	0x3E, 0x49, 0x49, 0x49, 0x00,
-	0x7E, 0x01, 0x01, 0x01, 0x7E,
-	0x2A, 0x2A, 0x2A, 0x2A, 0x2A,
-	0x44, 0x44, 0x5F, 0x44, 0x44,
-	0x40, 0x51, 0x4A, 0x44, 0x40,
-	0x40, 0x44, 0x4A, 0x51, 0x40,
-	0x00, 0x00, 0xFF, 0x01, 0x03,
-	0xE0, 0x80, 0xFF, 0x00, 0x00,
-	0x08, 0x08, 0x6B, 0x6B, 0x08,
-	0x36, 0x12, 0x36, 0x24, 0x36,
-	0x06, 0x0F, 0x09, 0x0F, 0x06,
-	0x00, 0x00, 0x18, 0x18, 0x00,
-	0x00, 0x00, 0x10, 0x10, 0x00,
-	0x30, 0x40, 0xFF, 0x01, 0x01,
-	0x00, 0x1F, 0x01, 0x01, 0x1E,
-	0x00, 0x19, 0x1D, 0x17, 0x12,
-	0x00, 0x3C, 0x3C, 0x3C, 0x3C,
-	0x00, 0x00, 0x00, 0x00, 0x00  // #255 NBSP
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, 0x18, 0x3C, 0x18, 0x00, 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, 0x18, 0x24, 0x18, 0x00, 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x26, 0x29, 0x79, 0x29, 0x26, 0x40, 0x7F, 0x05, 0x05, 0x07, 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x14, 0x22, 0x7F, 0x22, 0x14, 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, 0x66, 0x89, 0x95, 0x6A, 0x60, 0x60, 0x60, 0x60, 0x60, 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x08, 0x04, 0x7E, 0x04, 0x08, 0x10, 0x20, 0x7E, 0x20, 0x10, 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x1E, 0x10, 0x10, 0x10, 0x10, 0x0C, 0x1E, 0x0C, 0x1E, 0x0C,
+    0x30, 0x38, 0x3E, 0x38, 0x30, 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, 0x07, 0x00, 0x07, 0x00, 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x23, 0x13, 0x08, 0x64, 0x62, 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, 0x41, 0x22, 0x1C, 0x00, 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, 0x80, 0x70, 0x30, 0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00, 0x60, 0x60, 0x00, 0x20, 0x10, 0x08, 0x04, 0x02, 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, 0x42, 0x7F, 0x40, 0x00, 0x72, 0x49, 0x49, 0x49, 0x46, 0x21, 0x41, 0x49, 0x4D, 0x33, 0x18, 0x14, 0x12, 0x7F, 0x10, 0x27, 0x45, 0x45, 0x45, 0x39, 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x41, 0x21, 0x11, 0x09, 0x07, 0x36, 0x49, 0x49, 0x49, 0x36, 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, 0x40, 0x34, 0x00, 0x00,
+    0x00, 0x08, 0x14, 0x22, 0x41, 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, 0x41, 0x22, 0x14, 0x08, 0x02, 0x01, 0x59, 0x09, 0x06, 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x7F, 0x49, 0x49, 0x49, 0x36, 0x3E, 0x41, 0x41, 0x41, 0x22, 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x7F, 0x49, 0x49, 0x49, 0x41, 0x7F, 0x09, 0x09, 0x09, 0x01, 0x3E, 0x41, 0x41, 0x51, 0x73, 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, 0x41, 0x7F, 0x41, 0x00, 0x20, 0x40, 0x41, 0x3F, 0x01, 0x7F, 0x08, 0x14, 0x22, 0x41, 0x7F, 0x40, 0x40, 0x40, 0x40, 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x7F, 0x09, 0x09, 0x09, 0x06, 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x7F, 0x09, 0x19, 0x29, 0x46, 0x26, 0x49, 0x49, 0x49, 0x32, 0x03, 0x01, 0x7F, 0x01, 0x03, 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x63, 0x14, 0x08, 0x14, 0x63, 0x03, 0x04, 0x78, 0x04, 0x03,
+    0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, 0x7F, 0x41, 0x41, 0x41, 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, 0x41, 0x41, 0x41, 0x7F, 0x04, 0x02, 0x01, 0x02, 0x04, 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, 0x03, 0x07, 0x08, 0x00, 0x20, 0x54, 0x54, 0x78, 0x40, 0x7F, 0x28, 0x44, 0x44, 0x38, 0x38, 0x44, 0x44, 0x44, 0x28, 0x38, 0x44, 0x44, 0x28, 0x7F, 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, 0x08, 0x7E, 0x09, 0x02, 0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, 0x44, 0x7D, 0x40, 0x00, 0x20, 0x40, 0x40, 0x3D, 0x00, 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, 0x41, 0x7F, 0x40, 0x00, 0x7C, 0x04, 0x78, 0x04, 0x78, 0x7C, 0x08, 0x04, 0x04, 0x78, 0x38, 0x44, 0x44, 0x44, 0x38, 0xFC, 0x18, 0x24, 0x24, 0x18, 0x18, 0x24, 0x24, 0x18, 0xFC, 0x7C, 0x08, 0x04, 0x04, 0x08, 0x48, 0x54, 0x54, 0x54, 0x24, 0x04, 0x04, 0x3F, 0x44, 0x24, 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x3C, 0x40, 0x30, 0x40, 0x3C,
+    0x44, 0x28, 0x10, 0x28, 0x44, 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, 0x41, 0x36, 0x08, 0x00, 0x02, 0x01, 0x02, 0x04, 0x02, 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x1E, 0xA1, 0xA1, 0x61, 0x12, 0x3A, 0x40, 0x40, 0x20, 0x7A, 0x38, 0x54, 0x54, 0x55, 0x59, 0x21, 0x55, 0x55, 0x79, 0x41, 0x22, 0x54, 0x54, 0x78, 0x42,                                                                                                                                                                                                                                                                                                              // a-umlaut
+    0x21, 0x55, 0x54, 0x78, 0x40, 0x20, 0x54, 0x55, 0x79, 0x40, 0x0C, 0x1E, 0x52, 0x72, 0x12, 0x39, 0x55, 0x55, 0x55, 0x59, 0x39, 0x54, 0x54, 0x54, 0x59, 0x39, 0x55, 0x54, 0x54, 0x58, 0x00, 0x00, 0x45, 0x7C, 0x41, 0x00, 0x02, 0x45, 0x7D, 0x42, 0x00, 0x01, 0x45, 0x7C, 0x40, 0x7D, 0x12, 0x11, 0x12, 0x7D,                                                                                                                                                                                                                                                                                                                                                                                                        // A-umlaut
+    0xF0, 0x28, 0x25, 0x28, 0xF0, 0x7C, 0x54, 0x55, 0x45, 0x00, 0x20, 0x54, 0x54, 0x7C, 0x54, 0x7C, 0x0A, 0x09, 0x7F, 0x49, 0x32, 0x49, 0x49, 0x49, 0x32, 0x3A, 0x44, 0x44, 0x44, 0x3A,                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                // o-umlaut
+    0x32, 0x4A, 0x48, 0x48, 0x30, 0x3A, 0x41, 0x41, 0x21, 0x7A, 0x3A, 0x42, 0x40, 0x20, 0x78, 0x00, 0x9D, 0xA0, 0xA0, 0x7D, 0x3D, 0x42, 0x42, 0x42, 0x3D,                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              // O-umlaut
+    0x3D, 0x40, 0x40, 0x40, 0x3D, 0x3C, 0x24, 0xFF, 0x24, 0x24, 0x48, 0x7E, 0x49, 0x43, 0x66, 0x2B, 0x2F, 0xFC, 0x2F, 0x2B, 0xFF, 0x09, 0x29, 0xF6, 0x20, 0xC0, 0x88, 0x7E, 0x09, 0x03, 0x20, 0x54, 0x54, 0x79, 0x41, 0x00, 0x00, 0x44, 0x7D, 0x41, 0x30, 0x48, 0x48, 0x4A, 0x32, 0x38, 0x40, 0x40, 0x22, 0x7A, 0x00, 0x7A, 0x0A, 0x0A, 0x72, 0x7D, 0x0D, 0x19, 0x31, 0x7D, 0x26, 0x29, 0x29, 0x2F, 0x28, 0x26, 0x29, 0x29, 0x29, 0x26, 0x30, 0x48, 0x4D, 0x40, 0x20, 0x38, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x38, 0x2F, 0x10, 0xC8, 0xAC, 0xBA, 0x2F, 0x10, 0x28, 0x34, 0xFA, 0x00, 0x00, 0x7B, 0x00, 0x00, 0x08, 0x14, 0x2A, 0x14, 0x22, 0x22, 0x14, 0x2A, 0x14, 0x08, 0x55, 0x00, 0x55, 0x00, 0x55,  // #176 (25% block) missing in old code
+    0xAA, 0x55, 0xAA, 0x55, 0xAA,                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      // 50% block
+    0xFF, 0x55, 0xFF, 0x55, 0xFF,                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                      // 75% block
+    0x00, 0x00, 0x00, 0xFF, 0x00, 0x10, 0x10, 0x10, 0xFF, 0x00, 0x14, 0x14, 0x14, 0xFF, 0x00, 0x10, 0x10, 0xFF, 0x00, 0xFF, 0x10, 0x10, 0xF0, 0x10, 0xF0, 0x14, 0x14, 0x14, 0xFC, 0x00, 0x14, 0x14, 0xF7, 0x00, 0xFF, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0x14, 0x14, 0xF4, 0x04, 0xFC, 0x14, 0x14, 0x17, 0x10, 0x1F, 0x10, 0x10, 0x1F, 0x10, 0x1F, 0x14, 0x14, 0x14, 0x1F, 0x00, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x10, 0x10, 0x1F, 0x10, 0x10, 0x10, 0x10, 0xF0, 0x10, 0x00, 0x00, 0x00, 0xFF, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0xFF, 0x10, 0x00, 0x00, 0x00, 0xFF, 0x14, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0x00, 0x1F, 0x10, 0x17, 0x00, 0x00, 0xFC, 0x04, 0xF4, 0x14, 0x14, 0x17, 0x10, 0x17, 0x14, 0x14, 0xF4, 0x04, 0xF4, 0x00, 0x00, 0xFF, 0x00, 0xF7, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0xF7, 0x00, 0xF7, 0x14, 0x14, 0x14, 0x17, 0x14, 0x10, 0x10, 0x1F, 0x10, 0x1F,
+    0x14, 0x14, 0x14, 0xF4, 0x14, 0x10, 0x10, 0xF0, 0x10, 0xF0, 0x00, 0x00, 0x1F, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x1F, 0x14, 0x00, 0x00, 0x00, 0xFC, 0x14, 0x00, 0x00, 0xF0, 0x10, 0xF0, 0x10, 0x10, 0xFF, 0x10, 0xFF, 0x14, 0x14, 0x14, 0xFF, 0x14, 0x10, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x10, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x38, 0x44, 0x44, 0x38, 0x44, 0xFC, 0x4A, 0x4A, 0x4A, 0x34,                                                                                                                                                                                                                                                                                                                                                                                                       // sharp-s or beta
+    0x7E, 0x02, 0x02, 0x06, 0x06, 0x02, 0x7E, 0x02, 0x7E, 0x02, 0x63, 0x55, 0x49, 0x41, 0x63, 0x38, 0x44, 0x44, 0x3C, 0x04, 0x40, 0x7E, 0x20, 0x1E, 0x20, 0x06, 0x02, 0x7E, 0x02, 0x02, 0x99, 0xA5, 0xE7, 0xA5, 0x99, 0x1C, 0x2A, 0x49, 0x2A, 0x1C, 0x4C, 0x72, 0x01, 0x72, 0x4C, 0x30, 0x4A, 0x4D, 0x4D, 0x30, 0x30, 0x48, 0x78, 0x48, 0x30, 0xBC, 0x62, 0x5A, 0x46, 0x3D, 0x3E, 0x49, 0x49, 0x49, 0x00, 0x7E, 0x01, 0x01, 0x01, 0x7E, 0x2A, 0x2A, 0x2A, 0x2A, 0x2A, 0x44, 0x44, 0x5F, 0x44, 0x44, 0x40, 0x51, 0x4A, 0x44, 0x40, 0x40, 0x44, 0x4A, 0x51, 0x40, 0x00, 0x00, 0xFF, 0x01, 0x03, 0xE0, 0x80, 0xFF, 0x00, 0x00, 0x08, 0x08, 0x6B, 0x6B, 0x08, 0x36, 0x12, 0x36, 0x24, 0x36, 0x06, 0x0F, 0x09, 0x0F, 0x06, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x10, 0x10, 0x00, 0x30, 0x40, 0xFF, 0x01, 0x01, 0x00, 0x1F, 0x01, 0x01, 0x1E, 0x00, 0x19, 0x1D, 0x17, 0x12, 0x00, 0x3C, 0x3C, 0x3C, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00  // #255 NBSP
 };
-#endif // FONT5X7_H
+#endif  // FONT5X7_H
diff --git a/drivers/avr/hd44780.c b/drivers/avr/hd44780.c
index 51414d8f91..f71069dece 100644
--- a/drivers/avr/hd44780.c
+++ b/drivers/avr/hd44780.c
@@ -3,7 +3,7 @@
  Author:    Peter Fleury <pfleury@gmx.ch>  http://tinyurl.com/peterfleury
  License:   GNU General Public License Version 3
  File:	    $Id: lcd.c,v 1.15.2.2 2015/01/17 12:16:05 peter Exp $
- Software:  AVR-GCC 3.3 
+ Software:  AVR-GCC 3.3
  Target:    any AVR device, memory mapped mode only for AT90S4414/8515/Mega
 
  DESCRIPTION
@@ -13,15 +13,15 @@
        changed lcd_init(), added additional constants for lcd_command(),
        added 4-bit I/O mode, improved and optimized code.
 
-       Library can be operated in memory mapped mode (LCD_IO_MODE=0) or in 
+       Library can be operated in memory mapped mode (LCD_IO_MODE=0) or in
        4-bit IO port mode (LCD_IO_MODE=1). 8-bit IO port mode not supported.
-       
+
        Memory mapped mode compatible with Kanda STK200, but supports also
        generation of R/W signal through A8 address line.
 
  USAGE
        See the C include lcd.h file for a description of each function
-       
+
 *****************************************************************************/
 #include <inttypes.h>
 #include <avr/io.h>
@@ -29,55 +29,54 @@
 #include <util/delay.h>
 #include "hd44780.h"
 
-/* 
-** constants/macros 
+/*
+** constants/macros
 */
-#define DDR(x) (*(&x - 1))      /* address of data direction register of port x */
+#define DDR(x) (*(&x - 1)) /* address of data direction register of port x */
 #if defined(__AVR_ATmega64__) || defined(__AVR_ATmega128__)
-    /* on ATmega64/128 PINF is on port 0x00 and not 0x60 */
-    #define PIN(x) ( &PORTF==&(x) ? _SFR_IO8(0x00) : (*(&x - 2)) )
+/* on ATmega64/128 PINF is on port 0x00 and not 0x60 */
+#    define PIN(x) (&PORTF == &(x) ? _SFR_IO8(0x00) : (*(&x - 2)))
 #else
-	#define PIN(x) (*(&x - 2))    /* address of input register of port x          */
+#    define PIN(x) (*(&x - 2)) /* address of input register of port x          */
 #endif
 
-
 #if LCD_IO_MODE
-#define lcd_e_delay()   _delay_us(LCD_DELAY_ENABLE_PULSE)
-#define lcd_e_high()    LCD_E_PORT  |=  _BV(LCD_E_PIN);
-#define lcd_e_low()     LCD_E_PORT  &= ~_BV(LCD_E_PIN);
-#define lcd_e_toggle()  toggle_e()
-#define lcd_rw_high()   LCD_RW_PORT |=  _BV(LCD_RW_PIN)
-#define lcd_rw_low()    LCD_RW_PORT &= ~_BV(LCD_RW_PIN)
-#define lcd_rs_high()   LCD_RS_PORT |=  _BV(LCD_RS_PIN)
-#define lcd_rs_low()    LCD_RS_PORT &= ~_BV(LCD_RS_PIN)
+#    define lcd_e_delay() _delay_us(LCD_DELAY_ENABLE_PULSE)
+#    define lcd_e_high() LCD_E_PORT |= _BV(LCD_E_PIN);
+#    define lcd_e_low() LCD_E_PORT &= ~_BV(LCD_E_PIN);
+#    define lcd_e_toggle() toggle_e()
+#    define lcd_rw_high() LCD_RW_PORT |= _BV(LCD_RW_PIN)
+#    define lcd_rw_low() LCD_RW_PORT &= ~_BV(LCD_RW_PIN)
+#    define lcd_rs_high() LCD_RS_PORT |= _BV(LCD_RS_PIN)
+#    define lcd_rs_low() LCD_RS_PORT &= ~_BV(LCD_RS_PIN)
 #endif
 
 #if LCD_IO_MODE
-#if LCD_LINES==1
-#define LCD_FUNCTION_DEFAULT    LCD_FUNCTION_4BIT_1LINE 
+#    if LCD_LINES == 1
+#        define LCD_FUNCTION_DEFAULT LCD_FUNCTION_4BIT_1LINE
+#    else
+#        define LCD_FUNCTION_DEFAULT LCD_FUNCTION_4BIT_2LINES
+#    endif
 #else
-#define LCD_FUNCTION_DEFAULT    LCD_FUNCTION_4BIT_2LINES 
-#endif
-#else
-#if LCD_LINES==1
-#define LCD_FUNCTION_DEFAULT    LCD_FUNCTION_8BIT_1LINE
-#else
-#define LCD_FUNCTION_DEFAULT    LCD_FUNCTION_8BIT_2LINES
-#endif
+#    if LCD_LINES == 1
+#        define LCD_FUNCTION_DEFAULT LCD_FUNCTION_8BIT_1LINE
+#    else
+#        define LCD_FUNCTION_DEFAULT LCD_FUNCTION_8BIT_2LINES
+#    endif
 #endif
 
 #if LCD_CONTROLLER_KS0073
-#if LCD_LINES==4
+#    if LCD_LINES == 4
 
-#define KS0073_EXTENDED_FUNCTION_REGISTER_ON  0x2C   /* |0|010|1100 4-bit mode, extension-bit RE = 1 */
-#define KS0073_EXTENDED_FUNCTION_REGISTER_OFF 0x28   /* |0|010|1000 4-bit mode, extension-bit RE = 0 */
-#define KS0073_4LINES_MODE                    0x09   /* |0|000|1001 4 lines mode */
+#        define KS0073_EXTENDED_FUNCTION_REGISTER_ON 0x2C  /* |0|010|1100 4-bit mode, extension-bit RE = 1 */
+#        define KS0073_EXTENDED_FUNCTION_REGISTER_OFF 0x28 /* |0|010|1000 4-bit mode, extension-bit RE = 0 */
+#        define KS0073_4LINES_MODE 0x09                    /* |0|000|1001 4 lines mode */
 
-#endif
+#    endif
 #endif
 
-/* 
-** function prototypes 
+/*
+** function prototypes
 */
 #if LCD_IO_MODE
 static void toggle_e(void);
@@ -87,93 +86,83 @@ static void toggle_e(void);
 ** local functions
 */
 
-
-/************************************************************************* 
+/*************************************************************************
 delay for a minimum of <us> microseconds
 the number of loops is calculated at compile-time from MCU clock frequency
 *************************************************************************/
-#define delay(us)  _delay_us(us) 
-
+#define delay(us) _delay_us(us)
 
 #if LCD_IO_MODE
 /* toggle Enable Pin to initiate write */
-static void toggle_e(void)
-{
+static void toggle_e(void) {
     lcd_e_high();
     lcd_e_delay();
     lcd_e_low();
 }
 #endif
 
-
 /*************************************************************************
 Low-level function to write byte to LCD controller
 Input:    data   byte to write to LCD
-          rs     1: write data    
+          rs     1: write data
                  0: write instruction
 Returns:  none
 *************************************************************************/
 #if LCD_IO_MODE
-static void lcd_write(uint8_t data,uint8_t rs) 
-{
-    unsigned char dataBits ;
-
+static void lcd_write(uint8_t data, uint8_t rs) {
+    unsigned char dataBits;
 
-    if (rs) {        /* write data        (RS=1, RW=0) */
-       lcd_rs_high();
-    } else {         /* write instruction (RS=0, RW=0) */
-       lcd_rs_low();
+    if (rs) { /* write data        (RS=1, RW=0) */
+        lcd_rs_high();
+    } else { /* write instruction (RS=0, RW=0) */
+        lcd_rs_low();
     }
-    lcd_rw_low();    /* RW=0  write mode      */
+    lcd_rw_low(); /* RW=0  write mode      */
 
-    if ( ( &LCD_DATA0_PORT == &LCD_DATA1_PORT) && ( &LCD_DATA1_PORT == &LCD_DATA2_PORT ) && ( &LCD_DATA2_PORT == &LCD_DATA3_PORT )
-      && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) )
-    {
+    if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) {
         /* configure data pins as output */
         DDR(LCD_DATA0_PORT) |= 0x0F;
 
         /* output high nibble first */
-        dataBits = LCD_DATA0_PORT & 0xF0;
-        LCD_DATA0_PORT = dataBits |((data>>4)&0x0F);
+        dataBits       = LCD_DATA0_PORT & 0xF0;
+        LCD_DATA0_PORT = dataBits | ((data >> 4) & 0x0F);
         lcd_e_toggle();
 
         /* output low nibble */
-        LCD_DATA0_PORT = dataBits | (data&0x0F);
+        LCD_DATA0_PORT = dataBits | (data & 0x0F);
         lcd_e_toggle();
 
         /* all data pins high (inactive) */
         LCD_DATA0_PORT = dataBits | 0x0F;
-    }
-    else
-    {
+    } else {
         /* configure data pins as output */
         DDR(LCD_DATA0_PORT) |= _BV(LCD_DATA0_PIN);
         DDR(LCD_DATA1_PORT) |= _BV(LCD_DATA1_PIN);
         DDR(LCD_DATA2_PORT) |= _BV(LCD_DATA2_PIN);
         DDR(LCD_DATA3_PORT) |= _BV(LCD_DATA3_PIN);
-        
+
         /* output high nibble first */
         LCD_DATA3_PORT &= ~_BV(LCD_DATA3_PIN);
         LCD_DATA2_PORT &= ~_BV(LCD_DATA2_PIN);
         LCD_DATA1_PORT &= ~_BV(LCD_DATA1_PIN);
         LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN);
-    	if(data & 0x80) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN);
-    	if(data & 0x40) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN);
-    	if(data & 0x20) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);
-    	if(data & 0x10) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);   
+        if (data & 0x80) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN);
+        if (data & 0x40) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN);
+        if (data & 0x20) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);
+        if (data & 0x10) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);
         lcd_e_toggle();
-        
+
         /* output low nibble */
         LCD_DATA3_PORT &= ~_BV(LCD_DATA3_PIN);
         LCD_DATA2_PORT &= ~_BV(LCD_DATA2_PIN);
         LCD_DATA1_PORT &= ~_BV(LCD_DATA1_PIN);
         LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN);
-    	if(data & 0x08) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN);
-    	if(data & 0x04) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN);
-    	if(data & 0x02) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);
-    	if(data & 0x01) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);
-        lcd_e_toggle();        
-        
+        if (data & 0x08) LCD_DATA3_PORT |= _BV(LCD_DATA3_PIN);
+        if (data & 0x04) LCD_DATA2_PORT |= _BV(LCD_DATA2_PIN);
+        if (data & 0x02) LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);
+        if (data & 0x01) LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);
+        lcd_e_toggle();
+
         /* all data pins high (inactive) */
         LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);
         LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);
@@ -182,85 +171,81 @@ static void lcd_write(uint8_t data,uint8_t rs)
     }
 }
 #else
-#define lcd_write(d,rs) if (rs) *(volatile uint8_t*)(LCD_IO_DATA) = d; else *(volatile uint8_t*)(LCD_IO_FUNCTION) = d;
+#    define lcd_write(d, rs)                        \
+        if (rs)                                     \
+            *(volatile uint8_t *)(LCD_IO_DATA) = d; \
+        else                                        \
+            *(volatile uint8_t *)(LCD_IO_FUNCTION) = d;
 /* rs==0 -> write instruction to LCD_IO_FUNCTION */
 /* rs==1 -> write data to LCD_IO_DATA */
 #endif
 
-
 /*************************************************************************
 Low-level function to read byte from LCD controller
-Input:    rs     1: read data    
+Input:    rs     1: read data
                  0: read busy flag / address counter
 Returns:  byte read from LCD controller
 *************************************************************************/
 #if LCD_IO_MODE
-static uint8_t lcd_read(uint8_t rs) 
-{
+static uint8_t lcd_read(uint8_t rs) {
     uint8_t data;
-    
-    
+
     if (rs)
-        lcd_rs_high();                       /* RS=1: read data      */
+        lcd_rs_high(); /* RS=1: read data      */
     else
-        lcd_rs_low();                        /* RS=0: read busy flag */
-    lcd_rw_high();                           /* RW=1  read mode      */
-    
-    if ( ( &LCD_DATA0_PORT == &LCD_DATA1_PORT) && ( &LCD_DATA1_PORT == &LCD_DATA2_PORT ) && ( &LCD_DATA2_PORT == &LCD_DATA3_PORT )
-      && ( LCD_DATA0_PIN == 0 )&& (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) )
-    {
-        DDR(LCD_DATA0_PORT) &= 0xF0;         /* configure data pins as input */
-        
+        lcd_rs_low(); /* RS=0: read busy flag */
+    lcd_rw_high();    /* RW=1  read mode      */
+
+    if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) {
+        DDR(LCD_DATA0_PORT) &= 0xF0; /* configure data pins as input */
+
         lcd_e_high();
-        lcd_e_delay();        
-        data = PIN(LCD_DATA0_PORT) << 4;     /* read high nibble first */
+        lcd_e_delay();
+        data = PIN(LCD_DATA0_PORT) << 4; /* read high nibble first */
         lcd_e_low();
-        
-        lcd_e_delay();                       /* Enable 500ns low       */
-        
+
+        lcd_e_delay(); /* Enable 500ns low       */
+
         lcd_e_high();
         lcd_e_delay();
-        data |= PIN(LCD_DATA0_PORT)&0x0F;    /* read low nibble        */
+        data |= PIN(LCD_DATA0_PORT) & 0x0F; /* read low nibble        */
         lcd_e_low();
-    }
-    else
-    {
+    } else {
         /* configure data pins as input */
         DDR(LCD_DATA0_PORT) &= ~_BV(LCD_DATA0_PIN);
         DDR(LCD_DATA1_PORT) &= ~_BV(LCD_DATA1_PIN);
         DDR(LCD_DATA2_PORT) &= ~_BV(LCD_DATA2_PIN);
         DDR(LCD_DATA3_PORT) &= ~_BV(LCD_DATA3_PIN);
-                
+
         /* read high nibble first */
         lcd_e_high();
-        lcd_e_delay();        
+        lcd_e_delay();
         data = 0;
-        if ( PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN) ) data |= 0x10;
-        if ( PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN) ) data |= 0x20;
-        if ( PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN) ) data |= 0x40;
-        if ( PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN) ) data |= 0x80;
+        if (PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN)) data |= 0x10;
+        if (PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN)) data |= 0x20;
+        if (PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN)) data |= 0x40;
+        if (PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN)) data |= 0x80;
         lcd_e_low();
 
-        lcd_e_delay();                       /* Enable 500ns low       */
-    
-        /* read low nibble */    
+        lcd_e_delay(); /* Enable 500ns low       */
+
+        /* read low nibble */
         lcd_e_high();
         lcd_e_delay();
-        if ( PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN) ) data |= 0x01;
-        if ( PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN) ) data |= 0x02;
-        if ( PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN) ) data |= 0x04;
-        if ( PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN) ) data |= 0x08;        
+        if (PIN(LCD_DATA0_PORT) & _BV(LCD_DATA0_PIN)) data |= 0x01;
+        if (PIN(LCD_DATA1_PORT) & _BV(LCD_DATA1_PIN)) data |= 0x02;
+        if (PIN(LCD_DATA2_PORT) & _BV(LCD_DATA2_PIN)) data |= 0x04;
+        if (PIN(LCD_DATA3_PORT) & _BV(LCD_DATA3_PIN)) data |= 0x08;
         lcd_e_low();
     }
     return data;
 }
 #else
-#define lcd_read(rs) (rs) ? *(volatile uint8_t*)(LCD_IO_DATA+LCD_IO_READ) : *(volatile uint8_t*)(LCD_IO_FUNCTION+LCD_IO_READ)
+#    define lcd_read(rs) (rs) ? *(volatile uint8_t *)(LCD_IO_DATA + LCD_IO_READ) : *(volatile uint8_t *)(LCD_IO_FUNCTION + LCD_IO_READ)
 /* rs==0 -> read instruction from LCD_IO_FUNCTION */
 /* rs==1 -> read data from LCD_IO_DATA */
 #endif
 
-
 /*************************************************************************
 loops while lcd is busy, returns address counter
 *************************************************************************/
@@ -268,65 +253,62 @@ static uint8_t lcd_waitbusy(void)
 
 {
     register uint8_t c;
-    
+
     /* wait until busy flag is cleared */
-    while ( (c=lcd_read(0)) & (1<<LCD_BUSY)) {}
-    
+    while ((c = lcd_read(0)) & (1 << LCD_BUSY)) {
+    }
+
     /* the address counter is updated 4us after the busy flag is cleared */
     delay(LCD_DELAY_BUSY_FLAG);
 
     /* now read the address counter */
     return (lcd_read(0));  // return address counter
-    
-}/* lcd_waitbusy */
 
+} /* lcd_waitbusy */
 
 /*************************************************************************
-Move cursor to the start of next line or to the first line if the cursor 
+Move cursor to the start of next line or to the first line if the cursor
 is already on the last line.
 *************************************************************************/
-static inline void lcd_newline(uint8_t pos)
-{
+static inline void lcd_newline(uint8_t pos) {
     register uint8_t addressCounter;
 
-
-#if LCD_LINES==1
+#if LCD_LINES == 1
     addressCounter = 0;
 #endif
-#if LCD_LINES==2
-    if ( pos < (LCD_START_LINE2) )
+#if LCD_LINES == 2
+    if (pos < (LCD_START_LINE2))
         addressCounter = LCD_START_LINE2;
     else
         addressCounter = LCD_START_LINE1;
 #endif
-#if LCD_LINES==4
-#if KS0073_4LINES_MODE
-    if ( pos < LCD_START_LINE2 )
+#if LCD_LINES == 4
+#    if KS0073_4LINES_MODE
+    if (pos < LCD_START_LINE2)
         addressCounter = LCD_START_LINE2;
-    else if ( (pos >= LCD_START_LINE2) && (pos < LCD_START_LINE3) )
+    else if ((pos >= LCD_START_LINE2) && (pos < LCD_START_LINE3))
         addressCounter = LCD_START_LINE3;
-    else if ( (pos >= LCD_START_LINE3) && (pos < LCD_START_LINE4) )
+    else if ((pos >= LCD_START_LINE3) && (pos < LCD_START_LINE4))
         addressCounter = LCD_START_LINE4;
-    else 
+    else
         addressCounter = LCD_START_LINE1;
-#else
-    if ( pos < LCD_START_LINE3 )
+#    else
+    if (pos < LCD_START_LINE3)
         addressCounter = LCD_START_LINE2;
-    else if ( (pos >= LCD_START_LINE2) && (pos < LCD_START_LINE4) )
+    else if ((pos >= LCD_START_LINE2) && (pos < LCD_START_LINE4))
         addressCounter = LCD_START_LINE3;
-    else if ( (pos >= LCD_START_LINE3) && (pos < LCD_START_LINE2) )
+    else if ((pos >= LCD_START_LINE3) && (pos < LCD_START_LINE2))
         addressCounter = LCD_START_LINE4;
-    else 
+    else
         addressCounter = LCD_START_LINE1;
+#    endif
 #endif
-#endif
-    lcd_command((1<<LCD_DDRAM)+addressCounter);
-
-}/* lcd_newline */
+    lcd_command((1 << LCD_DDRAM) + addressCounter);
 
+} /* lcd_newline */
 
 /*
-** PUBLIC FUNCTIONS 
+** PUBLIC FUNCTIONS
 */
 
 /*************************************************************************
@@ -334,132 +316,107 @@ Send LCD controller instruction command
 Input:   instruction to send to LCD controller, see HD44780 data sheet
 Returns: none
 *************************************************************************/
-void lcd_command(uint8_t cmd)
-{
+void lcd_command(uint8_t cmd) {
     lcd_waitbusy();
-    lcd_write(cmd,0);
+    lcd_write(cmd, 0);
 }
 
-
 /*************************************************************************
-Send data byte to LCD controller 
+Send data byte to LCD controller
 Input:   data to send to LCD controller, see HD44780 data sheet
 Returns: none
 *************************************************************************/
-void lcd_data(uint8_t data)
-{
+void lcd_data(uint8_t data) {
     lcd_waitbusy();
-    lcd_write(data,1);
+    lcd_write(data, 1);
 }
 
-
-
 /*************************************************************************
 Set cursor to specified position
 Input:    x  horizontal position  (0: left most position)
           y  vertical position    (0: first line)
 Returns:  none
 *************************************************************************/
-void lcd_gotoxy(uint8_t x, uint8_t y)
-{
-#if LCD_LINES==1
-    lcd_command((1<<LCD_DDRAM)+LCD_START_LINE1+x);
+void lcd_gotoxy(uint8_t x, uint8_t y) {
+#if LCD_LINES == 1
+    lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x);
 #endif
-#if LCD_LINES==2
-    if ( y==0 ) 
-        lcd_command((1<<LCD_DDRAM)+LCD_START_LINE1+x);
+#if LCD_LINES == 2
+    if (y == 0)
+        lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x);
     else
-        lcd_command((1<<LCD_DDRAM)+LCD_START_LINE2+x);
+        lcd_command((1 << LCD_DDRAM) + LCD_START_LINE2 + x);
 #endif
-#if LCD_LINES==4
-    if ( y==0 )
-        lcd_command((1<<LCD_DDRAM)+LCD_START_LINE1+x);
-    else if ( y==1)
-        lcd_command((1<<LCD_DDRAM)+LCD_START_LINE2+x);
-    else if ( y==2)
-        lcd_command((1<<LCD_DDRAM)+LCD_START_LINE3+x);
+#if LCD_LINES == 4
+    if (y == 0)
+        lcd_command((1 << LCD_DDRAM) + LCD_START_LINE1 + x);
+    else if (y == 1)
+        lcd_command((1 << LCD_DDRAM) + LCD_START_LINE2 + x);
+    else if (y == 2)
+        lcd_command((1 << LCD_DDRAM) + LCD_START_LINE3 + x);
     else /* y==3 */
-        lcd_command((1<<LCD_DDRAM)+LCD_START_LINE4+x);
+        lcd_command((1 << LCD_DDRAM) + LCD_START_LINE4 + x);
 #endif
 
-}/* lcd_gotoxy */
-
+} /* lcd_gotoxy */
 
 /*************************************************************************
 *************************************************************************/
-int lcd_getxy(void)
-{
-    return lcd_waitbusy();
-}
-
+int lcd_getxy(void) { return lcd_waitbusy(); }
 
 /*************************************************************************
 Clear display and set cursor to home position
 *************************************************************************/
-void lcd_clrscr(void)
-{
-    lcd_command(1<<LCD_CLR);
-}
-
+void lcd_clrscr(void) { lcd_command(1 << LCD_CLR); }
 
 /*************************************************************************
 Set cursor to home position
 *************************************************************************/
-void lcd_home(void)
-{
-    lcd_command(1<<LCD_HOME);
-}
-
+void lcd_home(void) { lcd_command(1 << LCD_HOME); }
 
 /*************************************************************************
-Display character at current cursor position 
-Input:    character to be displayed                                       
+Display character at current cursor position
+Input:    character to be displayed
 Returns:  none
 *************************************************************************/
-void lcd_putc(char c)
-{
+void lcd_putc(char c) {
     uint8_t pos;
 
-
-    pos = lcd_waitbusy();   // read busy-flag and address counter
-    if (c=='\n')
-    {
+    pos = lcd_waitbusy();  // read busy-flag and address counter
+    if (c == '\n') {
         lcd_newline(pos);
-    }
-    else
-    {
-#if LCD_WRAP_LINES==1
-#if LCD_LINES==1
-        if ( pos == LCD_START_LINE1+LCD_DISP_LENGTH ) {
-            lcd_write((1<<LCD_DDRAM)+LCD_START_LINE1,0);
+    } else {
+#if LCD_WRAP_LINES == 1
+#    if LCD_LINES == 1
+        if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) {
+            lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0);
         }
-#elif LCD_LINES==2
-        if ( pos == LCD_START_LINE1+LCD_DISP_LENGTH ) {
-            lcd_write((1<<LCD_DDRAM)+LCD_START_LINE2,0);    
-        }else if ( pos == LCD_START_LINE2+LCD_DISP_LENGTH ){
-            lcd_write((1<<LCD_DDRAM)+LCD_START_LINE1,0);
+#    elif LCD_LINES == 2
+        if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) {
+            lcd_write((1 << LCD_DDRAM) + LCD_START_LINE2, 0);
+        } else if (pos == LCD_START_LINE2 + LCD_DISP_LENGTH) {
+            lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0);
         }
-#elif LCD_LINES==4
-        if ( pos == LCD_START_LINE1+LCD_DISP_LENGTH ) {
-            lcd_write((1<<LCD_DDRAM)+LCD_START_LINE2,0);    
-        }else if ( pos == LCD_START_LINE2+LCD_DISP_LENGTH ) {
-            lcd_write((1<<LCD_DDRAM)+LCD_START_LINE3,0);
-        }else if ( pos == LCD_START_LINE3+LCD_DISP_LENGTH ) {
-            lcd_write((1<<LCD_DDRAM)+LCD_START_LINE4,0);
-        }else if ( pos == LCD_START_LINE4+LCD_DISP_LENGTH ) {
-            lcd_write((1<<LCD_DDRAM)+LCD_START_LINE1,0);
+#    elif LCD_LINES == 4
+        if (pos == LCD_START_LINE1 + LCD_DISP_LENGTH) {
+            lcd_write((1 << LCD_DDRAM) + LCD_START_LINE2, 0);
+        } else if (pos == LCD_START_LINE2 + LCD_DISP_LENGTH) {
+            lcd_write((1 << LCD_DDRAM) + LCD_START_LINE3, 0);
+        } else if (pos == LCD_START_LINE3 + LCD_DISP_LENGTH) {
+            lcd_write((1 << LCD_DDRAM) + LCD_START_LINE4, 0);
+        } else if (pos == LCD_START_LINE4 + LCD_DISP_LENGTH) {
+            lcd_write((1 << LCD_DDRAM) + LCD_START_LINE1, 0);
         }
-#endif
+#    endif
         lcd_waitbusy();
 #endif
         lcd_write(c, 1);
     }
 
-}/* lcd_putc */
-
+} /* lcd_putc */
 
 /*************************************************************************
-Display string without auto linefeed 
+Display string without auto linefeed
 Input:    string to be displayed
 Returns:  none
 *************************************************************************/
@@ -468,16 +425,15 @@ void lcd_puts(const char *s)
 {
     register char c;
 
-    while ( (c = *s++) ) {
+    while ((c = *s++)) {
         lcd_putc(c);
     }
 
-}/* lcd_puts */
-
+} /* lcd_puts */
 
 /*************************************************************************
-Display string from program memory without auto linefeed 
-Input:     string from program memory be be displayed                                        
+Display string from program memory without auto linefeed
+Input:     string from program memory be be displayed
 Returns:   none
 *************************************************************************/
 void lcd_puts_p(const char *progmem_s)
@@ -485,108 +441,96 @@ void lcd_puts_p(const char *progmem_s)
 {
     register char c;
 
-    while ( (c = pgm_read_byte(progmem_s++)) ) {
+    while ((c = pgm_read_byte(progmem_s++))) {
         lcd_putc(c);
     }
 
-}/* lcd_puts_p */
-
+} /* lcd_puts_p */
 
 /*************************************************************************
-Initialize display and select type of cursor 
+Initialize display and select type of cursor
 Input:    dispAttr LCD_DISP_OFF            display off
                    LCD_DISP_ON             display on, cursor off
                    LCD_DISP_ON_CURSOR      display on, cursor on
                    LCD_DISP_CURSOR_BLINK   display on, cursor on flashing
 Returns:  none
 *************************************************************************/
-void lcd_init(uint8_t dispAttr)
-{
+void lcd_init(uint8_t dispAttr) {
 #if LCD_IO_MODE
     /*
      *  Initialize LCD to 4 bit I/O mode
      */
-     
-    if ( ( &LCD_DATA0_PORT == &LCD_DATA1_PORT) && ( &LCD_DATA1_PORT == &LCD_DATA2_PORT ) && ( &LCD_DATA2_PORT == &LCD_DATA3_PORT )
-      && ( &LCD_RS_PORT == &LCD_DATA0_PORT) && ( &LCD_RW_PORT == &LCD_DATA0_PORT) && (&LCD_E_PORT == &LCD_DATA0_PORT)
-      && (LCD_DATA0_PIN == 0 ) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) 
-      && (LCD_RS_PIN == 4 ) && (LCD_RW_PIN == 5) && (LCD_E_PIN == 6 ) )
-    {
+
+    if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (&LCD_RS_PORT == &LCD_DATA0_PORT) && (&LCD_RW_PORT == &LCD_DATA0_PORT) && (&LCD_E_PORT == &LCD_DATA0_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) && (LCD_RS_PIN == 4) && (LCD_RW_PIN == 5) && (LCD_E_PIN == 6)) {
         /* configure all port bits as output (all LCD lines on same port) */
         DDR(LCD_DATA0_PORT) |= 0x7F;
-    }
-    else if ( ( &LCD_DATA0_PORT == &LCD_DATA1_PORT) && ( &LCD_DATA1_PORT == &LCD_DATA2_PORT ) && ( &LCD_DATA2_PORT == &LCD_DATA3_PORT )
-           && (LCD_DATA0_PIN == 0 ) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3) )
-    {
+    } else if ((&LCD_DATA0_PORT == &LCD_DATA1_PORT) && (&LCD_DATA1_PORT == &LCD_DATA2_PORT) && (&LCD_DATA2_PORT == &LCD_DATA3_PORT) && (LCD_DATA0_PIN == 0) && (LCD_DATA1_PIN == 1) && (LCD_DATA2_PIN == 2) && (LCD_DATA3_PIN == 3)) {
         /* configure all port bits as output (all LCD data lines on same port, but control lines on different ports) */
         DDR(LCD_DATA0_PORT) |= 0x0F;
-        DDR(LCD_RS_PORT)    |= _BV(LCD_RS_PIN);
-        DDR(LCD_RW_PORT)    |= _BV(LCD_RW_PIN);
-        DDR(LCD_E_PORT)     |= _BV(LCD_E_PIN);
-    }
-    else
-    {
+        DDR(LCD_RS_PORT) |= _BV(LCD_RS_PIN);
+        DDR(LCD_RW_PORT) |= _BV(LCD_RW_PIN);
+        DDR(LCD_E_PORT) |= _BV(LCD_E_PIN);
+    } else {
         /* configure all port bits as output (LCD data and control lines on different ports */
-        DDR(LCD_RS_PORT)    |= _BV(LCD_RS_PIN);
-        DDR(LCD_RW_PORT)    |= _BV(LCD_RW_PIN);
-        DDR(LCD_E_PORT)     |= _BV(LCD_E_PIN);
+        DDR(LCD_RS_PORT) |= _BV(LCD_RS_PIN);
+        DDR(LCD_RW_PORT) |= _BV(LCD_RW_PIN);
+        DDR(LCD_E_PORT) |= _BV(LCD_E_PIN);
         DDR(LCD_DATA0_PORT) |= _BV(LCD_DATA0_PIN);
         DDR(LCD_DATA1_PORT) |= _BV(LCD_DATA1_PIN);
         DDR(LCD_DATA2_PORT) |= _BV(LCD_DATA2_PIN);
         DDR(LCD_DATA3_PORT) |= _BV(LCD_DATA3_PIN);
     }
-    delay(LCD_DELAY_BOOTUP);             /* wait 16ms or more after power-on       */
-    
+    delay(LCD_DELAY_BOOTUP); /* wait 16ms or more after power-on       */
+
     /* initial write to lcd is 8bit */
-    LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);    // LCD_FUNCTION>>4;
-    LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);    // LCD_FUNCTION_8BIT>>4;
+    LCD_DATA1_PORT |= _BV(LCD_DATA1_PIN);  // LCD_FUNCTION>>4;
+    LCD_DATA0_PORT |= _BV(LCD_DATA0_PIN);  // LCD_FUNCTION_8BIT>>4;
+    lcd_e_toggle();
+    delay(LCD_DELAY_INIT); /* delay, busy flag can't be checked here */
+
+    /* repeat last command */
     lcd_e_toggle();
-    delay(LCD_DELAY_INIT);               /* delay, busy flag can't be checked here */
-   
-    /* repeat last command */ 
-    lcd_e_toggle();      
-    delay(LCD_DELAY_INIT_REP);           /* delay, busy flag can't be checked here */
-    
+    delay(LCD_DELAY_INIT_REP); /* delay, busy flag can't be checked here */
+
     /* repeat last command a third time */
-    lcd_e_toggle();      
-    delay(LCD_DELAY_INIT_REP);           /* delay, busy flag can't be checked here */
+    lcd_e_toggle();
+    delay(LCD_DELAY_INIT_REP); /* delay, busy flag can't be checked here */
 
     /* now configure for 4bit mode */
-    LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN);   // LCD_FUNCTION_4BIT_1LINE>>4
+    LCD_DATA0_PORT &= ~_BV(LCD_DATA0_PIN);  // LCD_FUNCTION_4BIT_1LINE>>4
     lcd_e_toggle();
-    delay(LCD_DELAY_INIT_4BIT);          /* some displays need this additional delay */
-    
-    /* from now the LCD only accepts 4 bit I/O, we can use lcd_command() */    
+    delay(LCD_DELAY_INIT_4BIT); /* some displays need this additional delay */
+
+    /* from now the LCD only accepts 4 bit I/O, we can use lcd_command() */
 #else
     /*
      * Initialize LCD to 8 bit memory mapped mode
      */
-    
-    /* enable external SRAM (memory mapped lcd) and one wait state */        
+
+    /* enable external SRAM (memory mapped lcd) and one wait state */
     MCUCR = _BV(SRE) | _BV(SRW);
 
     /* reset LCD */
-    delay(LCD_DELAY_BOOTUP);                    /* wait 16ms after power-on     */
-    lcd_write(LCD_FUNCTION_8BIT_1LINE,0);   /* function set: 8bit interface */                   
-    delay(LCD_DELAY_INIT);                      /* wait 5ms                     */
-    lcd_write(LCD_FUNCTION_8BIT_1LINE,0);   /* function set: 8bit interface */                 
-    delay(LCD_DELAY_INIT_REP);                  /* wait 64us                    */
-    lcd_write(LCD_FUNCTION_8BIT_1LINE,0);   /* function set: 8bit interface */                
-    delay(LCD_DELAY_INIT_REP);                  /* wait 64us                    */
+    delay(LCD_DELAY_BOOTUP);               /* wait 16ms after power-on     */
+    lcd_write(LCD_FUNCTION_8BIT_1LINE, 0); /* function set: 8bit interface */
+    delay(LCD_DELAY_INIT);                 /* wait 5ms                     */
+    lcd_write(LCD_FUNCTION_8BIT_1LINE, 0); /* function set: 8bit interface */
+    delay(LCD_DELAY_INIT_REP);             /* wait 64us                    */
+    lcd_write(LCD_FUNCTION_8BIT_1LINE, 0); /* function set: 8bit interface */
+    delay(LCD_DELAY_INIT_REP);             /* wait 64us                    */
 #endif
 
 #if KS0073_4LINES_MODE
     /* Display with KS0073 controller requires special commands for enabling 4 line mode */
-	lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_ON);
-	lcd_command(KS0073_4LINES_MODE);
-	lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_OFF);
+    lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_ON);
+    lcd_command(KS0073_4LINES_MODE);
+    lcd_command(KS0073_EXTENDED_FUNCTION_REGISTER_OFF);
 #else
-    lcd_command(LCD_FUNCTION_DEFAULT);      /* function set: display lines  */
+    lcd_command(LCD_FUNCTION_DEFAULT);     /* function set: display lines  */
 #endif
-    lcd_command(LCD_DISP_OFF);              /* display off                  */
-    lcd_clrscr();                           /* display clear                */ 
-    lcd_command(LCD_MODE_DEFAULT);          /* set entry mode               */
-    lcd_command(dispAttr);                  /* display/cursor control       */
-
-}/* lcd_init */
+    lcd_command(LCD_DISP_OFF);     /* display off                  */
+    lcd_clrscr();                  /* display clear                */
+    lcd_command(LCD_MODE_DEFAULT); /* set entry mode               */
+    lcd_command(dispAttr);         /* display/cursor control       */
 
+} /* lcd_init */
diff --git a/drivers/avr/hd44780.h b/drivers/avr/hd44780.h
index 7421c8131f..e60817e989 100644
--- a/drivers/avr/hd44780.h
+++ b/drivers/avr/hd44780.h
@@ -6,7 +6,7 @@
  License:   GNU General Public License Version 3
  File:	    $Id: lcd.h,v 1.14.2.4 2015/01/20 17:16:07 peter Exp $
  Software:  AVR-GCC 4.x
- Hardware:  any AVR device, memory mapped mode only for AVR with 
+ Hardware:  any AVR device, memory mapped mode only for AVR with
             memory mapped interface (AT90S8515/ATmega8515/ATmega128)
 ***************************************************************************/
 
@@ -15,333 +15,315 @@
  Collection of libraries for AVR-GCC
  @author Peter Fleury pfleury@gmx.ch http://tinyurl.com/peterfleury
  @copyright (C) 2015 Peter Fleury, GNU General Public License Version 3
- 
+
  @file
  @defgroup pfleury_lcd LCD library <lcd.h>
  @code #include <lcd.h> @endcode
- 
+
  @brief Basic routines for interfacing a HD44780U-based character LCD display
 
- LCD character displays can be found in many devices, like espresso machines, laser printers. 
- The Hitachi HD44780 controller and its compatible controllers like Samsung KS0066U have become an industry standard for these types of displays. 
- 
+ LCD character displays can be found in many devices, like espresso machines, laser printers.
+ The Hitachi HD44780 controller and its compatible controllers like Samsung KS0066U have become an industry standard for these types of displays.
+
  This library allows easy interfacing with a HD44780 compatible display and can be
- operated in memory mapped mode (LCD_IO_MODE defined as 0 in the include file lcd.h.) or in 
+ operated in memory mapped mode (LCD_IO_MODE defined as 0 in the include file lcd.h.) or in
  4-bit IO port mode (LCD_IO_MODE defined as 1). 8-bit IO port mode is not supported.
 
  Memory mapped mode is compatible with old Kanda STK200 starter kit, but also supports
  generation of R/W signal through A8 address line.
 
  @see The chapter <a href=" http://homepage.hispeed.ch/peterfleury/avr-lcd44780.html" target="_blank">Interfacing a HD44780 Based LCD to an AVR</a>
-      on my home page, which shows example circuits how to connect an LCD to an AVR controller. 
+      on my home page, which shows example circuits how to connect an LCD to an AVR controller.
 
  @author Peter Fleury pfleury@gmx.ch http://tinyurl.com/peterfleury
- 
+
  @version   2.0
- 
+
  @copyright (C) 2015 Peter Fleury, GNU General Public License Version 3
-  
+
 */
 
 #include <inttypes.h>
 #include <avr/pgmspace.h>
 
 #if (__GNUC__ * 100 + __GNUC_MINOR__) < 405
-#error "This library requires AVR-GCC 4.5 or later, update to newer AVR-GCC compiler !"
+#    error "This library requires AVR-GCC 4.5 or later, update to newer AVR-GCC compiler !"
 #endif
 
-
 /**@{*/
 
 /*
- * LCD and target specific definitions below can be defined in a separate include file with name lcd_definitions.h instead modifying this file 
+ * LCD and target specific definitions below can be defined in a separate include file with name lcd_definitions.h instead modifying this file
  * by adding -D_LCD_DEFINITIONS_FILE to the CDEFS section in the Makefile
  * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h
  */
 #ifdef _LCD_DEFINITIONS_FILE
-#include "lcd_definitions.h"
+#    include "lcd_definitions.h"
 #endif
 
-
 /**
  * @name  Definition for LCD controller type
  * Use 0 for HD44780 controller, change to 1 for displays with KS0073 controller.
  */
-#ifndef LCD_CONTROLLER_KS0073 
-#define LCD_CONTROLLER_KS0073 0  /**< Use 0 for HD44780 controller, 1 for KS0073 controller */
+#ifndef LCD_CONTROLLER_KS0073
+#    define LCD_CONTROLLER_KS0073 0 /**< Use 0 for HD44780 controller, 1 for KS0073 controller */
 #endif
 
-/** 
- * @name  Definitions for Display Size 
+/**
+ * @name  Definitions for Display Size
  * Change these definitions to adapt setting to your display
  *
- * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by 
+ * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by
  * adding -D_LCD_DEFINITIONS_FILE to the CDEFS section in the Makefile.
  * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h
  *
  */
 #ifndef LCD_LINES
-#define LCD_LINES           2     /**< number of visible lines of the display */
+#    define LCD_LINES 2 /**< number of visible lines of the display */
 #endif
 #ifndef LCD_DISP_LENGTH
-#define LCD_DISP_LENGTH    16     /**< visibles characters per line of the display */
+#    define LCD_DISP_LENGTH 16 /**< visibles characters per line of the display */
 #endif
 #ifndef LCD_LINE_LENGTH
-#define LCD_LINE_LENGTH  0x40     /**< internal line length of the display    */
+#    define LCD_LINE_LENGTH 0x40 /**< internal line length of the display    */
 #endif
 #ifndef LCD_START_LINE1
-#define LCD_START_LINE1  0x00     /**< DDRAM address of first char of line 1 */
+#    define LCD_START_LINE1 0x00 /**< DDRAM address of first char of line 1 */
 #endif
 #ifndef LCD_START_LINE2
-#define LCD_START_LINE2  0x40     /**< DDRAM address of first char of line 2 */
+#    define LCD_START_LINE2 0x40 /**< DDRAM address of first char of line 2 */
 #endif
 #ifndef LCD_START_LINE3
-#define LCD_START_LINE3  0x14     /**< DDRAM address of first char of line 3 */
+#    define LCD_START_LINE3 0x14 /**< DDRAM address of first char of line 3 */
 #endif
 #ifndef LCD_START_LINE4
-#define LCD_START_LINE4  0x54     /**< DDRAM address of first char of line 4 */
+#    define LCD_START_LINE4 0x54 /**< DDRAM address of first char of line 4 */
 #endif
 #ifndef LCD_WRAP_LINES
-#define LCD_WRAP_LINES      0     /**< 0: no wrap, 1: wrap at end of visibile line */
+#    define LCD_WRAP_LINES 0 /**< 0: no wrap, 1: wrap at end of visibile line */
 #endif
 
-
 /**
  * @name Definitions for 4-bit IO mode
  *
- * The four LCD data lines and the three control lines RS, RW, E can be on the 
- * same port or on different ports. 
+ * The four LCD data lines and the three control lines RS, RW, E can be on the
+ * same port or on different ports.
  * Change LCD_RS_PORT, LCD_RW_PORT, LCD_E_PORT if you want the control lines on
- * different ports. 
+ * different ports.
  *
  * Normally the four data lines should be mapped to bit 0..3 on one port, but it
  * is possible to connect these data lines in different order or even on different
  * ports by adapting the LCD_DATAx_PORT and LCD_DATAx_PIN definitions.
  *
- * Adjust these definitions to your target.\n 
- * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by 
+ * Adjust these definitions to your target.\n
+ * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by
  * adding \b -D_LCD_DEFINITIONS_FILE to the \b CDEFS section in the Makefile.
  * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h
- *  
+ *
  */
-#define LCD_IO_MODE      1            /**< 0: memory mapped mode, 1: IO port mode */
+#define LCD_IO_MODE 1 /**< 0: memory mapped mode, 1: IO port mode */
 
 #if LCD_IO_MODE
 
-#ifndef LCD_PORT
-#define LCD_PORT         PORTA        /**< port for the LCD lines   */
-#endif
-#ifndef LCD_DATA0_PORT
-#define LCD_DATA0_PORT   LCD_PORT     /**< port for 4bit data bit 0 */
-#endif
-#ifndef LCD_DATA1_PORT
-#define LCD_DATA1_PORT   LCD_PORT     /**< port for 4bit data bit 1 */
-#endif
-#ifndef LCD_DATA2_PORT
-#define LCD_DATA2_PORT   LCD_PORT     /**< port for 4bit data bit 2 */
-#endif
-#ifndef LCD_DATA3_PORT
-#define LCD_DATA3_PORT   LCD_PORT     /**< port for 4bit data bit 3 */
-#endif
-#ifndef LCD_DATA0_PIN
-#define LCD_DATA0_PIN    4            /**< pin for 4bit data bit 0  */
-#endif
-#ifndef LCD_DATA1_PIN
-#define LCD_DATA1_PIN    5            /**< pin for 4bit data bit 1  */
-#endif
-#ifndef LCD_DATA2_PIN
-#define LCD_DATA2_PIN    6            /**< pin for 4bit data bit 2  */
-#endif
-#ifndef LCD_DATA3_PIN
-#define LCD_DATA3_PIN    7            /**< pin for 4bit data bit 3  */
-#endif
-#ifndef LCD_RS_PORT
-#define LCD_RS_PORT      LCD_PORT     /**< port for RS line         */
-#endif
-#ifndef LCD_RS_PIN
-#define LCD_RS_PIN       3            /**< pin  for RS line         */
-#endif
-#ifndef LCD_RW_PORT
-#define LCD_RW_PORT      LCD_PORT     /**< port for RW line         */
-#endif
-#ifndef LCD_RW_PIN
-#define LCD_RW_PIN       2            /**< pin  for RW line         */
-#endif
-#ifndef LCD_E_PORT
-#define LCD_E_PORT       LCD_PORT     /**< port for Enable line     */
-#endif
-#ifndef LCD_E_PIN
-#define LCD_E_PIN        1            /**< pin  for Enable line     */
-#endif
-
-#elif defined(__AVR_AT90S4414__) || defined(__AVR_AT90S8515__) || defined(__AVR_ATmega64__) || \
-      defined(__AVR_ATmega8515__)|| defined(__AVR_ATmega103__) || defined(__AVR_ATmega128__) || \
-      defined(__AVR_ATmega161__) || defined(__AVR_ATmega162__)
+#    ifndef LCD_PORT
+#        define LCD_PORT PORTA /**< port for the LCD lines   */
+#    endif
+#    ifndef LCD_DATA0_PORT
+#        define LCD_DATA0_PORT LCD_PORT /**< port for 4bit data bit 0 */
+#    endif
+#    ifndef LCD_DATA1_PORT
+#        define LCD_DATA1_PORT LCD_PORT /**< port for 4bit data bit 1 */
+#    endif
+#    ifndef LCD_DATA2_PORT
+#        define LCD_DATA2_PORT LCD_PORT /**< port for 4bit data bit 2 */
+#    endif
+#    ifndef LCD_DATA3_PORT
+#        define LCD_DATA3_PORT LCD_PORT /**< port for 4bit data bit 3 */
+#    endif
+#    ifndef LCD_DATA0_PIN
+#        define LCD_DATA0_PIN 4 /**< pin for 4bit data bit 0  */
+#    endif
+#    ifndef LCD_DATA1_PIN
+#        define LCD_DATA1_PIN 5 /**< pin for 4bit data bit 1  */
+#    endif
+#    ifndef LCD_DATA2_PIN
+#        define LCD_DATA2_PIN 6 /**< pin for 4bit data bit 2  */
+#    endif
+#    ifndef LCD_DATA3_PIN
+#        define LCD_DATA3_PIN 7 /**< pin for 4bit data bit 3  */
+#    endif
+#    ifndef LCD_RS_PORT
+#        define LCD_RS_PORT LCD_PORT /**< port for RS line         */
+#    endif
+#    ifndef LCD_RS_PIN
+#        define LCD_RS_PIN 3 /**< pin  for RS line         */
+#    endif
+#    ifndef LCD_RW_PORT
+#        define LCD_RW_PORT LCD_PORT /**< port for RW line         */
+#    endif
+#    ifndef LCD_RW_PIN
+#        define LCD_RW_PIN 2 /**< pin  for RW line         */
+#    endif
+#    ifndef LCD_E_PORT
+#        define LCD_E_PORT LCD_PORT /**< port for Enable line     */
+#    endif
+#    ifndef LCD_E_PIN
+#        define LCD_E_PIN 1 /**< pin  for Enable line     */
+#    endif
+
+#elif defined(__AVR_AT90S4414__) || defined(__AVR_AT90S8515__) || defined(__AVR_ATmega64__) || defined(__AVR_ATmega8515__) || defined(__AVR_ATmega103__) || defined(__AVR_ATmega128__) || defined(__AVR_ATmega161__) || defined(__AVR_ATmega162__)
 /*
  * memory mapped mode is only supported when the device has an external data memory interface
  */
-#define LCD_IO_DATA      0xC000    /* A15=E=1, A14=RS=1                 */
-#define LCD_IO_FUNCTION  0x8000    /* A15=E=1, A14=RS=0                 */
-#define LCD_IO_READ      0x0100    /* A8 =R/W=1 (R/W: 1=Read, 0=Write   */
+#    define LCD_IO_DATA 0xC000     /* A15=E=1, A14=RS=1                 */
+#    define LCD_IO_FUNCTION 0x8000 /* A15=E=1, A14=RS=0                 */
+#    define LCD_IO_READ 0x0100     /* A8 =R/W=1 (R/W: 1=Read, 0=Write   */
 
 #else
-#error "external data memory interface not available for this device, use 4-bit IO port mode"
+#    error "external data memory interface not available for this device, use 4-bit IO port mode"
 
 #endif
 
-
 /**
  * @name Definitions of delays
  * Used to calculate delay timers.
  * Adapt the F_CPU define in the Makefile to the clock frequency in Hz of your target
  *
- * These delay times can be adjusted, if some displays require different delays.\n 
- * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by 
+ * These delay times can be adjusted, if some displays require different delays.\n
+ * These definitions can be defined in a separate include file \b lcd_definitions.h instead modifying this file by
  * adding \b -D_LCD_DEFINITIONS_FILE to the \b CDEFS section in the Makefile.
  * All definitions added to the file lcd_definitions.h will override the default definitions from lcd.h
  */
 #ifndef LCD_DELAY_BOOTUP
-#define LCD_DELAY_BOOTUP   16000      /**< delay in micro seconds after power-on  */
+#    define LCD_DELAY_BOOTUP 16000 /**< delay in micro seconds after power-on  */
 #endif
 #ifndef LCD_DELAY_INIT
-#define LCD_DELAY_INIT      5000      /**< delay in micro seconds after initialization command sent  */
+#    define LCD_DELAY_INIT 5000 /**< delay in micro seconds after initialization command sent  */
 #endif
 #ifndef LCD_DELAY_INIT_REP
-#define LCD_DELAY_INIT_REP    64      /**< delay in micro seconds after initialization command repeated */
+#    define LCD_DELAY_INIT_REP 64 /**< delay in micro seconds after initialization command repeated */
 #endif
 #ifndef LCD_DELAY_INIT_4BIT
-#define LCD_DELAY_INIT_4BIT   64      /**< delay in micro seconds after setting 4-bit mode */ 
+#    define LCD_DELAY_INIT_4BIT 64 /**< delay in micro seconds after setting 4-bit mode */
 #endif
 #ifndef LCD_DELAY_BUSY_FLAG
-#define LCD_DELAY_BUSY_FLAG    4      /**< time in micro seconds the address counter is updated after busy flag is cleared */
+#    define LCD_DELAY_BUSY_FLAG 4 /**< time in micro seconds the address counter is updated after busy flag is cleared */
 #endif
 #ifndef LCD_DELAY_ENABLE_PULSE
-#define LCD_DELAY_ENABLE_PULSE 1      /**< enable signal pulse width in micro seconds */
+#    define LCD_DELAY_ENABLE_PULSE 1 /**< enable signal pulse width in micro seconds */
 #endif
 
-
 /**
  * @name Definitions for LCD command instructions
- * The constants define the various LCD controller instructions which can be passed to the 
+ * The constants define the various LCD controller instructions which can be passed to the
  * function lcd_command(), see HD44780 data sheet for a complete description.
  */
 
 /* instruction register bit positions, see HD44780U data sheet */
-#define LCD_CLR               0      /* DB0: clear display                  */
-#define LCD_HOME              1      /* DB1: return to home position        */
-#define LCD_ENTRY_MODE        2      /* DB2: set entry mode                 */
-#define LCD_ENTRY_INC         1      /*   DB1: 1=increment, 0=decrement     */
-#define LCD_ENTRY_SHIFT       0      /*   DB2: 1=display shift on           */
-#define LCD_ON                3      /* DB3: turn lcd/cursor on             */
-#define LCD_ON_DISPLAY        2      /*   DB2: turn display on              */
-#define LCD_ON_CURSOR         1      /*   DB1: turn cursor on               */
-#define LCD_ON_BLINK          0      /*     DB0: blinking cursor ?          */
-#define LCD_MOVE              4      /* DB4: move cursor/display            */
-#define LCD_MOVE_DISP         3      /*   DB3: move display (0-> cursor) ?  */
-#define LCD_MOVE_RIGHT        2      /*   DB2: move right (0-> left) ?      */
-#define LCD_FUNCTION          5      /* DB5: function set                   */
-#define LCD_FUNCTION_8BIT     4      /*   DB4: set 8BIT mode (0->4BIT mode) */
-#define LCD_FUNCTION_2LINES   3      /*   DB3: two lines (0->one line)      */
-#define LCD_FUNCTION_10DOTS   2      /*   DB2: 5x10 font (0->5x7 font)      */
-#define LCD_CGRAM             6      /* DB6: set CG RAM address             */
-#define LCD_DDRAM             7      /* DB7: set DD RAM address             */
-#define LCD_BUSY              7      /* DB7: LCD is busy                    */
+#define LCD_CLR 0             /* DB0: clear display                  */
+#define LCD_HOME 1            /* DB1: return to home position        */
+#define LCD_ENTRY_MODE 2      /* DB2: set entry mode                 */
+#define LCD_ENTRY_INC 1       /*   DB1: 1=increment, 0=decrement     */
+#define LCD_ENTRY_SHIFT 0     /*   DB2: 1=display shift on           */
+#define LCD_ON 3              /* DB3: turn lcd/cursor on             */
+#define LCD_ON_DISPLAY 2      /*   DB2: turn display on              */
+#define LCD_ON_CURSOR 1       /*   DB1: turn cursor on               */
+#define LCD_ON_BLINK 0        /*     DB0: blinking cursor ?          */
+#define LCD_MOVE 4            /* DB4: move cursor/display            */
+#define LCD_MOVE_DISP 3       /*   DB3: move display (0-> cursor) ?  */
+#define LCD_MOVE_RIGHT 2      /*   DB2: move right (0-> left) ?      */
+#define LCD_FUNCTION 5        /* DB5: function set                   */
+#define LCD_FUNCTION_8BIT 4   /*   DB4: set 8BIT mode (0->4BIT mode) */
+#define LCD_FUNCTION_2LINES 3 /*   DB3: two lines (0->one line)      */
+#define LCD_FUNCTION_10DOTS 2 /*   DB2: 5x10 font (0->5x7 font)      */
+#define LCD_CGRAM 6           /* DB6: set CG RAM address             */
+#define LCD_DDRAM 7           /* DB7: set DD RAM address             */
+#define LCD_BUSY 7            /* DB7: LCD is busy                    */
 
 /* set entry mode: display shift on/off, dec/inc cursor move direction */
-#define LCD_ENTRY_DEC            0x04   /* display shift off, dec cursor move dir */
-#define LCD_ENTRY_DEC_SHIFT      0x05   /* display shift on,  dec cursor move dir */
-#define LCD_ENTRY_INC_           0x06   /* display shift off, inc cursor move dir */
-#define LCD_ENTRY_INC_SHIFT      0x07   /* display shift on,  inc cursor move dir */
+#define LCD_ENTRY_DEC 0x04       /* display shift off, dec cursor move dir */
+#define LCD_ENTRY_DEC_SHIFT 0x05 /* display shift on,  dec cursor move dir */
+#define LCD_ENTRY_INC_ 0x06      /* display shift off, inc cursor move dir */
+#define LCD_ENTRY_INC_SHIFT 0x07 /* display shift on,  inc cursor move dir */
 
 /* display on/off, cursor on/off, blinking char at cursor position */
-#define LCD_DISP_OFF             0x08   /* display off                            */
-#define LCD_DISP_ON              0x0C   /* display on, cursor off                 */
-#define LCD_DISP_ON_BLINK        0x0D   /* display on, cursor off, blink char     */
-#define LCD_DISP_ON_CURSOR       0x0E   /* display on, cursor on                  */
-#define LCD_DISP_ON_CURSOR_BLINK 0x0F   /* display on, cursor on, blink char      */
+#define LCD_DISP_OFF 0x08             /* display off                            */
+#define LCD_DISP_ON 0x0C              /* display on, cursor off                 */
+#define LCD_DISP_ON_BLINK 0x0D        /* display on, cursor off, blink char     */
+#define LCD_DISP_ON_CURSOR 0x0E       /* display on, cursor on                  */
+#define LCD_DISP_ON_CURSOR_BLINK 0x0F /* display on, cursor on, blink char      */
 
 /* move cursor/shift display */
-#define LCD_MOVE_CURSOR_LEFT     0x10   /* move cursor left  (decrement)          */
-#define LCD_MOVE_CURSOR_RIGHT    0x14   /* move cursor right (increment)          */
-#define LCD_MOVE_DISP_LEFT       0x18   /* shift display left                     */
-#define LCD_MOVE_DISP_RIGHT      0x1C   /* shift display right                    */
+#define LCD_MOVE_CURSOR_LEFT 0x10  /* move cursor left  (decrement)          */
+#define LCD_MOVE_CURSOR_RIGHT 0x14 /* move cursor right (increment)          */
+#define LCD_MOVE_DISP_LEFT 0x18    /* shift display left                     */
+#define LCD_MOVE_DISP_RIGHT 0x1C   /* shift display right                    */
 
 /* function set: set interface data length and number of display lines */
-#define LCD_FUNCTION_4BIT_1LINE  0x20   /* 4-bit interface, single line, 5x7 dots */
-#define LCD_FUNCTION_4BIT_2LINES 0x28   /* 4-bit interface, dual line,   5x7 dots */
-#define LCD_FUNCTION_8BIT_1LINE  0x30   /* 8-bit interface, single line, 5x7 dots */
-#define LCD_FUNCTION_8BIT_2LINES 0x38   /* 8-bit interface, dual line,   5x7 dots */
+#define LCD_FUNCTION_4BIT_1LINE 0x20  /* 4-bit interface, single line, 5x7 dots */
+#define LCD_FUNCTION_4BIT_2LINES 0x28 /* 4-bit interface, dual line,   5x7 dots */
+#define LCD_FUNCTION_8BIT_1LINE 0x30  /* 8-bit interface, single line, 5x7 dots */
+#define LCD_FUNCTION_8BIT_2LINES 0x38 /* 8-bit interface, dual line,   5x7 dots */
 
+#define LCD_MODE_DEFAULT ((1 << LCD_ENTRY_MODE) | (1 << LCD_ENTRY_INC))
 
-#define LCD_MODE_DEFAULT     ((1<<LCD_ENTRY_MODE) | (1<<LCD_ENTRY_INC) )
-
-
-
-/** 
+/**
  *  @name Functions
  */
 
-
 /**
  @brief    Initialize display and select type of cursor
  @param    dispAttr \b LCD_DISP_OFF display off\n
                     \b LCD_DISP_ON display on, cursor off\n
                     \b LCD_DISP_ON_CURSOR display on, cursor on\n
-                    \b LCD_DISP_ON_CURSOR_BLINK display on, cursor on flashing             
+                    \b LCD_DISP_ON_CURSOR_BLINK display on, cursor on flashing
  @return  none
 */
 extern void lcd_init(uint8_t dispAttr);
 
-
 /**
  @brief    Clear display and set cursor to home position
  @return   none
 */
 extern void lcd_clrscr(void);
 
-
 /**
  @brief    Set cursor to home position
  @return   none
 */
 extern void lcd_home(void);
 
-
 /**
  @brief    Set cursor to specified position
- 
+
  @param    x horizontal position\n (0: left most position)
  @param    y vertical position\n   (0: first line)
  @return   none
 */
 extern void lcd_gotoxy(uint8_t x, uint8_t y);
 
-
 /**
  @brief    Display character at current cursor position
- @param    c character to be displayed                                       
+ @param    c character to be displayed
  @return   none
 */
 extern void lcd_putc(char c);
 
-
 /**
  @brief    Display string without auto linefeed
- @param    s string to be displayed                                        
+ @param    s string to be displayed
  @return   none
 */
 extern void lcd_puts(const char *s);
 
-
 /**
  @brief    Display string from program memory without auto linefeed
- @param    progmem_s string from program memory be be displayed                                        
+ @param    progmem_s string from program memory be be displayed
  @return   none
  @see      lcd_puts_P
 */
 extern void lcd_puts_p(const char *progmem_s);
 
-
 /**
  @brief    Send LCD controller instruction command
  @param    cmd instruction to send to LCD controller, see HD44780 data sheet
@@ -349,23 +331,20 @@ extern void lcd_puts_p(const char *progmem_s);
 */
 extern void lcd_command(uint8_t cmd);
 
-
 /**
- @brief    Send data byte to LCD controller 
- 
+ @brief    Send data byte to LCD controller
+
  Similar to lcd_putc(), but without interpreting LF
  @param    data byte to send to LCD controller, see HD44780 data sheet
  @return   none
 */
 extern void lcd_data(uint8_t data);
 
-
 /**
  @brief macros for automatically storing string constant in program memory
 */
-#define lcd_puts_P(__s)         lcd_puts_p(PSTR(__s))
+#define lcd_puts_P(__s) lcd_puts_p(PSTR(__s))
 
 /**@}*/
 
-#endif //LCD_H
-
+#endif  // LCD_H
diff --git a/drivers/avr/i2c_master.c b/drivers/avr/i2c_master.c
index 0acc246426..52924437e0 100755..100644
--- a/drivers/avr/i2c_master.c
+++ b/drivers/avr/i2c_master.c
@@ -25,200 +25,200 @@
 #include "wait.h"
 
 #ifndef F_SCL
-#  define F_SCL 400000UL  // SCL frequency
+#    define F_SCL 400000UL  // SCL frequency
 #endif
 #define Prescaler 1
 #define TWBR_val ((((F_CPU / F_SCL) / Prescaler) - 16) / 2)
 
 void i2c_init(void) {
-  TWSR = 0; /* no prescaler */
-  TWBR = (uint8_t)TWBR_val;
+    TWSR = 0; /* no prescaler */
+    TWBR = (uint8_t)TWBR_val;
 
-  #ifdef __AVR_ATmega32A__
-  // set pull-up resistors on I2C bus pins
-  PORTC |= 0b11;
+#ifdef __AVR_ATmega32A__
+    // set pull-up resistors on I2C bus pins
+    PORTC |= 0b11;
 
-  // enable TWI (two-wire interface)
-  TWCR |= (1 << TWEN);
+    // enable TWI (two-wire interface)
+    TWCR |= (1 << TWEN);
 
-  // enable TWI interrupt and slave address ACK
-  TWCR |= (1 << TWIE);
-  TWCR |= (1 << TWEA);
-  #endif
+    // enable TWI interrupt and slave address ACK
+    TWCR |= (1 << TWIE);
+    TWCR |= (1 << TWEA);
+#endif
 }
 
 i2c_status_t i2c_start(uint8_t address, uint16_t timeout) {
-  // reset TWI control register
-  TWCR = 0;
-  // transmit START condition
-  TWCR = (1 << TWINT) | (1 << TWSTA) | (1 << TWEN);
-
-  uint16_t timeout_timer = timer_read();
-  while (!(TWCR & (1 << TWINT))) {
-    if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
-      return I2C_STATUS_TIMEOUT;
-    }
-  }
-
-  // check if the start condition was successfully transmitted
-  if (((TW_STATUS & 0xF8) != TW_START) && ((TW_STATUS & 0xF8) != TW_REP_START)) {
-    return I2C_STATUS_ERROR;
-  }
-
-  // load slave address into data register
-  TWDR = address;
-  // start transmission of address
-  TWCR = (1 << TWINT) | (1 << TWEN);
-
-  timeout_timer = timer_read();
-  while (!(TWCR & (1 << TWINT))) {
-    if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
-      return I2C_STATUS_TIMEOUT;
-    }
-  }
-
-  // check if the device has acknowledged the READ / WRITE mode
-  uint8_t twst = TW_STATUS & 0xF8;
-  if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
-    return I2C_STATUS_ERROR;
-  }
-
-  return I2C_STATUS_SUCCESS;
+    // reset TWI control register
+    TWCR = 0;
+    // transmit START condition
+    TWCR = (1 << TWINT) | (1 << TWSTA) | (1 << TWEN);
+
+    uint16_t timeout_timer = timer_read();
+    while (!(TWCR & (1 << TWINT))) {
+        if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
+            return I2C_STATUS_TIMEOUT;
+        }
+    }
+
+    // check if the start condition was successfully transmitted
+    if (((TW_STATUS & 0xF8) != TW_START) && ((TW_STATUS & 0xF8) != TW_REP_START)) {
+        return I2C_STATUS_ERROR;
+    }
+
+    // load slave address into data register
+    TWDR = address;
+    // start transmission of address
+    TWCR = (1 << TWINT) | (1 << TWEN);
+
+    timeout_timer = timer_read();
+    while (!(TWCR & (1 << TWINT))) {
+        if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
+            return I2C_STATUS_TIMEOUT;
+        }
+    }
+
+    // check if the device has acknowledged the READ / WRITE mode
+    uint8_t twst = TW_STATUS & 0xF8;
+    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
+        return I2C_STATUS_ERROR;
+    }
+
+    return I2C_STATUS_SUCCESS;
 }
 
 i2c_status_t i2c_write(uint8_t data, uint16_t timeout) {
-  // load data into data register
-  TWDR = data;
-  // start transmission of data
-  TWCR = (1 << TWINT) | (1 << TWEN);
-
-  uint16_t timeout_timer = timer_read();
-  while (!(TWCR & (1 << TWINT))) {
-    if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
-      return I2C_STATUS_TIMEOUT;
+    // load data into data register
+    TWDR = data;
+    // start transmission of data
+    TWCR = (1 << TWINT) | (1 << TWEN);
+
+    uint16_t timeout_timer = timer_read();
+    while (!(TWCR & (1 << TWINT))) {
+        if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
+            return I2C_STATUS_TIMEOUT;
+        }
     }
-  }
 
-  if ((TW_STATUS & 0xF8) != TW_MT_DATA_ACK) {
-    return I2C_STATUS_ERROR;
-  }
+    if ((TW_STATUS & 0xF8) != TW_MT_DATA_ACK) {
+        return I2C_STATUS_ERROR;
+    }
 
-  return I2C_STATUS_SUCCESS;
+    return I2C_STATUS_SUCCESS;
 }
 
 int16_t i2c_read_ack(uint16_t timeout) {
-  // start TWI module and acknowledge data after reception
-  TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWEA);
-
-  uint16_t timeout_timer = timer_read();
-  while (!(TWCR & (1 << TWINT))) {
-    if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
-      return I2C_STATUS_TIMEOUT;
+    // start TWI module and acknowledge data after reception
+    TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWEA);
+
+    uint16_t timeout_timer = timer_read();
+    while (!(TWCR & (1 << TWINT))) {
+        if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
+            return I2C_STATUS_TIMEOUT;
+        }
     }
-  }
 
-  // return received data from TWDR
-  return TWDR;
+    // return received data from TWDR
+    return TWDR;
 }
 
 int16_t i2c_read_nack(uint16_t timeout) {
-  // start receiving without acknowledging reception
-  TWCR = (1 << TWINT) | (1 << TWEN);
-
-  uint16_t timeout_timer = timer_read();
-  while (!(TWCR & (1 << TWINT))) {
-    if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
-      return I2C_STATUS_TIMEOUT;
+    // start receiving without acknowledging reception
+    TWCR = (1 << TWINT) | (1 << TWEN);
+
+    uint16_t timeout_timer = timer_read();
+    while (!(TWCR & (1 << TWINT))) {
+        if ((timeout != I2C_TIMEOUT_INFINITE) && ((timer_read() - timeout_timer) >= timeout)) {
+            return I2C_STATUS_TIMEOUT;
+        }
     }
-  }
 
-  // return received data from TWDR
-  return TWDR;
+    // return received data from TWDR
+    return TWDR;
 }
 
 i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) {
-  i2c_status_t status = i2c_start(address | I2C_WRITE, timeout);
+    i2c_status_t status = i2c_start(address | I2C_WRITE, timeout);
 
-  for (uint16_t i = 0; i < length && status >= 0; i++) {
-    status = i2c_write(data[i], timeout);
-  }
+    for (uint16_t i = 0; i < length && status >= 0; i++) {
+        status = i2c_write(data[i], timeout);
+    }
 
-  i2c_stop();
+    i2c_stop();
 
-  return status;
+    return status;
 }
 
 i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) {
-  i2c_status_t status = i2c_start(address | I2C_READ, timeout);
+    i2c_status_t status = i2c_start(address | I2C_READ, timeout);
 
-  for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) {
-    status = i2c_read_ack(timeout);
-    if (status >= 0) {
-      data[i] = status;
+    for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) {
+        status = i2c_read_ack(timeout);
+        if (status >= 0) {
+            data[i] = status;
+        }
     }
-  }
 
-  if (status >= 0) {
-    status = i2c_read_nack(timeout);
     if (status >= 0) {
-      data[(length - 1)] = status;
+        status = i2c_read_nack(timeout);
+        if (status >= 0) {
+            data[(length - 1)] = status;
+        }
     }
-  }
 
-  i2c_stop();
+    i2c_stop();
 
-  return (status < 0) ? status : I2C_STATUS_SUCCESS;
+    return (status < 0) ? status : I2C_STATUS_SUCCESS;
 }
 
 i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) {
-  i2c_status_t status = i2c_start(devaddr | 0x00, timeout);
-  if (status >= 0) {
-    status = i2c_write(regaddr, timeout);
+    i2c_status_t status = i2c_start(devaddr | 0x00, timeout);
+    if (status >= 0) {
+        status = i2c_write(regaddr, timeout);
 
-    for (uint16_t i = 0; i < length && status >= 0; i++) {
-      status = i2c_write(data[i], timeout);
+        for (uint16_t i = 0; i < length && status >= 0; i++) {
+            status = i2c_write(data[i], timeout);
+        }
     }
-  }
 
-  i2c_stop();
+    i2c_stop();
 
-  return status;
+    return status;
 }
 
 i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) {
-  i2c_status_t status = i2c_start(devaddr, timeout);
-  if (status < 0) {
-    goto error;
-  }
+    i2c_status_t status = i2c_start(devaddr, timeout);
+    if (status < 0) {
+        goto error;
+    }
 
-  status = i2c_write(regaddr, timeout);
-  if (status < 0) {
-    goto error;
-  }
+    status = i2c_write(regaddr, timeout);
+    if (status < 0) {
+        goto error;
+    }
 
-  status = i2c_start(devaddr | 0x01, timeout);
+    status = i2c_start(devaddr | 0x01, timeout);
 
-  for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) {
-    status = i2c_read_ack(timeout);
-    if (status >= 0) {
-      data[i] = status;
+    for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) {
+        status = i2c_read_ack(timeout);
+        if (status >= 0) {
+            data[i] = status;
+        }
     }
-  }
 
-  if (status >= 0) {
-    status = i2c_read_nack(timeout);
     if (status >= 0) {
-      data[(length - 1)] = status;
+        status = i2c_read_nack(timeout);
+        if (status >= 0) {
+            data[(length - 1)] = status;
+        }
     }
-  }
 
 error:
-  i2c_stop();
+    i2c_stop();
 
-  return (status < 0) ? status : I2C_STATUS_SUCCESS;
+    return (status < 0) ? status : I2C_STATUS_SUCCESS;
 }
 
 void i2c_stop(void) {
-  // transmit STOP condition
-  TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWSTO);
+    // transmit STOP condition
+    TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWSTO);
 }
diff --git a/drivers/avr/i2c_master.h b/drivers/avr/i2c_master.h
index d68142430a..0a3b6c508c 100755..100644
--- a/drivers/avr/i2c_master.h
+++ b/drivers/avr/i2c_master.h
@@ -26,21 +26,21 @@
 typedef int16_t i2c_status_t;
 
 #define I2C_STATUS_SUCCESS (0)
-#define I2C_STATUS_ERROR   (-1)
+#define I2C_STATUS_ERROR (-1)
 #define I2C_STATUS_TIMEOUT (-2)
 
 #define I2C_TIMEOUT_IMMEDIATE (0)
 #define I2C_TIMEOUT_INFINITE (0xFFFF)
 
-void i2c_init(void);
+void         i2c_init(void);
 i2c_status_t i2c_start(uint8_t address, uint16_t timeout);
 i2c_status_t i2c_write(uint8_t data, uint16_t timeout);
-int16_t i2c_read_ack(uint16_t timeout);
-int16_t i2c_read_nack(uint16_t timeout);
+int16_t      i2c_read_ack(uint16_t timeout);
+int16_t      i2c_read_nack(uint16_t timeout);
 i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout);
 i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
 i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout);
 i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
-void i2c_stop(void);
+void         i2c_stop(void);
 
-#endif // I2C_MASTER_H
+#endif  // I2C_MASTER_H
diff --git a/drivers/avr/i2c_slave.c b/drivers/avr/i2c_slave.c
index 4958a0f8e5..3fb684f70a 100755..100644
--- a/drivers/avr/i2c_slave.c
+++ b/drivers/avr/i2c_slave.c
@@ -27,24 +27,24 @@
 volatile uint8_t i2c_slave_reg[I2C_SLAVE_REG_COUNT];
 
 static volatile uint8_t buffer_address;
-static volatile bool slave_has_register_set = false;
+static volatile bool    slave_has_register_set = false;
 
-void i2c_slave_init(uint8_t address){
+void i2c_slave_init(uint8_t address) {
     // load address into TWI address register
     TWAR = address;
     // set the TWCR to enable address matching and enable TWI, clear TWINT, enable TWI interrupt
     TWCR = (1 << TWIE) | (1 << TWEA) | (1 << TWINT) | (1 << TWEN);
 }
 
-void i2c_slave_stop(void){
+void i2c_slave_stop(void) {
     // clear acknowledge and enable bits
     TWCR &= ~((1 << TWEA) | (1 << TWEN));
 }
 
-ISR(TWI_vect){
+ISR(TWI_vect) {
     uint8_t ack = 1;
 
-    switch(TW_STATUS){
+    switch (TW_STATUS) {
         case TW_SR_SLA_ACK:
             // The device is now a slave receiver
             slave_has_register_set = false;
@@ -53,14 +53,14 @@ ISR(TWI_vect){
         case TW_SR_DATA_ACK:
             // This device is a slave receiver and has received data
             // First byte is the location then the bytes will be writen in buffer with auto-incriment
-            if(!slave_has_register_set){
+            if (!slave_has_register_set) {
                 buffer_address = TWDR;
 
                 if (buffer_address >= I2C_SLAVE_REG_COUNT) {  // address out of bounds dont ack
-                  ack            = 0;
-                  buffer_address = 0;
+                    ack            = 0;
+                    buffer_address = 0;
                 }
-                slave_has_register_set = true; // address has been receaved now fill in buffer
+                slave_has_register_set = true;  // address has been receaved now fill in buffer
             } else {
                 i2c_slave_reg[buffer_address] = TWDR;
                 buffer_address++;
diff --git a/drivers/avr/i2c_slave.h b/drivers/avr/i2c_slave.h
index 2f4589e9c7..5ed0b11a8e 100755..100644
--- a/drivers/avr/i2c_slave.h
+++ b/drivers/avr/i2c_slave.h
@@ -30,4 +30,4 @@ extern volatile uint8_t i2c_slave_reg[I2C_SLAVE_REG_COUNT];
 void i2c_slave_init(uint8_t address);
 void i2c_slave_stop(void);
 
-#endif // I2C_SLAVE_H
+#endif  // I2C_SLAVE_H
diff --git a/drivers/avr/pro_micro.h b/drivers/avr/pro_micro.h
index f9e7ed75d9..762a99a058 100644
--- a/drivers/avr/pro_micro.h
+++ b/drivers/avr/pro_micro.h
@@ -90,14 +90,14 @@
 #undef OCR2_6
 #undef OCR2_7
 
-#define NUM_DIGITAL_PINS  30
+#define NUM_DIGITAL_PINS 30
 #define NUM_ANALOG_INPUTS 12
 
-#define TX_RX_LED_INIT  DDRD |= (1<<5), DDRB |= (1<<0)
-#define TXLED0          PORTD |= (1<<5)
-#define TXLED1          PORTD &= ~(1<<5)
-#define RXLED0          PORTB |= (1<<0)
-#define RXLED1          PORTB &= ~(1<<0)
+#define TX_RX_LED_INIT DDRD |= (1 << 5), DDRB |= (1 << 0)
+#define TXLED0 PORTD |= (1 << 5)
+#define TXLED1 PORTD &= ~(1 << 5)
+#define RXLED0 PORTB |= (1 << 0)
+#define RXLED1 PORTB &= ~(1 << 0)
 
 static const uint8_t SDA = 2;
 static const uint8_t SCL = 3;
@@ -111,27 +111,27 @@ static const uint8_t SCK  = 15;
 
 // Mapping of analog pins as digital I/O
 // A6-A11 share with digital pins
-static const uint8_t ADC0 = 18;
-static const uint8_t ADC1 = 19;
-static const uint8_t ADC2 = 20;
-static const uint8_t ADC3 = 21;
-static const uint8_t ADC4 = 22;
-static const uint8_t ADC5 = 23;
-static const uint8_t ADC6 = 24;   // D4
-static const uint8_t ADC7 = 25;   // D6
-static const uint8_t ADC8 = 26;   // D8
-static const uint8_t ADC9 = 27;   // D9
+static const uint8_t ADC0  = 18;
+static const uint8_t ADC1  = 19;
+static const uint8_t ADC2  = 20;
+static const uint8_t ADC3  = 21;
+static const uint8_t ADC4  = 22;
+static const uint8_t ADC5  = 23;
+static const uint8_t ADC6  = 24;  // D4
+static const uint8_t ADC7  = 25;  // D6
+static const uint8_t ADC8  = 26;  // D8
+static const uint8_t ADC9  = 27;  // D9
 static const uint8_t ADC10 = 28;  // D10
 static const uint8_t ADC11 = 29;  // D12
 
-#define digitalPinToPCICR(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
+#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
 #define digitalPinToPCICRbit(p) 0
-#define digitalPinToPCMSK(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
-#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
+#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0))
+#define digitalPinToPCMSKbit(p) (((p) >= 8 && (p) <= 11) ? (p)-4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4))))))
 
 //  __AVR_ATmega32U4__ has an unusual mapping of pins to channels
 extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
-#define analogPinToChannel(P)  ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) )
+#define analogPinToChannel(P) (pgm_read_byte(analog_pin_to_channel_PGM + (P)))
 
 #define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT)))))
 
@@ -182,159 +182,121 @@ extern const uint8_t PROGMEM analog_pin_to_channel_PGM[];
 // appropriate addresses for various functions (e.g. reading
 // and writing)
 const uint16_t PROGMEM port_to_mode_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &DDRB,
-    (uint16_t) &DDRC,
-    (uint16_t) &DDRD,
-    (uint16_t) &DDRE,
-    (uint16_t) &DDRF,
+    NOT_A_PORT, NOT_A_PORT, (uint16_t)&DDRB, (uint16_t)&DDRC, (uint16_t)&DDRD, (uint16_t)&DDRE, (uint16_t)&DDRF,
 };
 
 const uint16_t PROGMEM port_to_output_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &PORTB,
-    (uint16_t) &PORTC,
-    (uint16_t) &PORTD,
-    (uint16_t) &PORTE,
-    (uint16_t) &PORTF,
+    NOT_A_PORT, NOT_A_PORT, (uint16_t)&PORTB, (uint16_t)&PORTC, (uint16_t)&PORTD, (uint16_t)&PORTE, (uint16_t)&PORTF,
 };
 
 const uint16_t PROGMEM port_to_input_PGM[] = {
-    NOT_A_PORT,
-    NOT_A_PORT,
-    (uint16_t) &PINB,
-    (uint16_t) &PINC,
-    (uint16_t) &PIND,
-    (uint16_t) &PINE,
-    (uint16_t) &PINF,
+    NOT_A_PORT, NOT_A_PORT, (uint16_t)&PINB, (uint16_t)&PINC, (uint16_t)&PIND, (uint16_t)&PINE, (uint16_t)&PINF,
 };
 
 const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
-    PD, // D0 - PD2
-    PD, // D1 - PD3
-    PD, // D2 - PD1
-    PD, // D3 - PD0
-    PD, // D4 - PD4
-    PC, // D5 - PC6
-    PD, // D6 - PD7
-    PE, // D7 - PE6
-
-    PB, // D8 - PB4
-    PB, // D9 - PB5
-    PB, // D10 - PB6
-    PB, // D11 - PB7
-    PD, // D12 - PD6
-    PC, // D13 - PC7
-
-    PB, // D14 - MISO - PB3
-    PB, // D15 - SCK - PB1
-    PB, // D16 - MOSI - PB2
-    PB, // D17 - SS - PB0
-
-    PF, // D18 - A0 - PF7
-    PF, // D19 - A1 - PF6
-    PF, // D20 - A2 - PF5
-    PF, // D21 - A3 - PF4
-    PF, // D22 - A4 - PF1
-    PF, // D23 - A5 - PF0
-
-    PD, // D24 - PD5
-    PD, // D25 / D6 - A7 - PD7
-    PB, // D26 / D8 - A8 - PB4
-    PB, // D27 / D9 - A9 - PB5
-    PB, // D28 / D10 - A10 - PB6
-    PD, // D29 / D12 - A11 - PD6
+    PD,  // D0 - PD2
+    PD,  // D1 - PD3
+    PD,  // D2 - PD1
+    PD,  // D3 - PD0
+    PD,  // D4 - PD4
+    PC,  // D5 - PC6
+    PD,  // D6 - PD7
+    PE,  // D7 - PE6
+
+    PB,  // D8 - PB4
+    PB,  // D9 - PB5
+    PB,  // D10 - PB6
+    PB,  // D11 - PB7
+    PD,  // D12 - PD6
+    PC,  // D13 - PC7
+
+    PB,  // D14 - MISO - PB3
+    PB,  // D15 - SCK - PB1
+    PB,  // D16 - MOSI - PB2
+    PB,  // D17 - SS - PB0
+
+    PF,  // D18 - A0 - PF7
+    PF,  // D19 - A1 - PF6
+    PF,  // D20 - A2 - PF5
+    PF,  // D21 - A3 - PF4
+    PF,  // D22 - A4 - PF1
+    PF,  // D23 - A5 - PF0
+
+    PD,  // D24 - PD5
+    PD,  // D25 / D6 - A7 - PD7
+    PB,  // D26 / D8 - A8 - PB4
+    PB,  // D27 / D9 - A9 - PB5
+    PB,  // D28 / D10 - A10 - PB6
+    PD,  // D29 / D12 - A11 - PD6
 };
 
 const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
-    _BV(2), // D0 - PD2
-    _BV(3), // D1 - PD3
-    _BV(1), // D2 - PD1
-    _BV(0), // D3 - PD0
-    _BV(4), // D4 - PD4
-    _BV(6), // D5 - PC6
-    _BV(7), // D6 - PD7
-    _BV(6), // D7 - PE6
-
-    _BV(4), // D8 - PB4
-    _BV(5), // D9 - PB5
-    _BV(6), // D10 - PB6
-    _BV(7), // D11 - PB7
-    _BV(6), // D12 - PD6
-    _BV(7), // D13 - PC7
-
-    _BV(3), // D14 - MISO - PB3
-    _BV(1), // D15 - SCK - PB1
-    _BV(2), // D16 - MOSI - PB2
-    _BV(0), // D17 - SS - PB0
-
-    _BV(7), // D18 - A0 - PF7
-    _BV(6), // D19 - A1 - PF6
-    _BV(5), // D20 - A2 - PF5
-    _BV(4), // D21 - A3 - PF4
-    _BV(1), // D22 - A4 - PF1
-    _BV(0), // D23 - A5 - PF0
-
-    _BV(5), // D24 - PD5
-    _BV(7), // D25 / D6 - A7 - PD7
-    _BV(4), // D26 / D8 - A8 - PB4
-    _BV(5), // D27 / D9 - A9 - PB5
-    _BV(6), // D28 / D10 - A10 - PB6
-    _BV(6), // D29 / D12 - A11 - PD6
+    _BV(2),  // D0 - PD2
+    _BV(3),  // D1 - PD3
+    _BV(1),  // D2 - PD1
+    _BV(0),  // D3 - PD0
+    _BV(4),  // D4 - PD4
+    _BV(6),  // D5 - PC6
+    _BV(7),  // D6 - PD7
+    _BV(6),  // D7 - PE6
+
+    _BV(4),  // D8 - PB4
+    _BV(5),  // D9 - PB5
+    _BV(6),  // D10 - PB6
+    _BV(7),  // D11 - PB7
+    _BV(6),  // D12 - PD6
+    _BV(7),  // D13 - PC7
+
+    _BV(3),  // D14 - MISO - PB3
+    _BV(1),  // D15 - SCK - PB1
+    _BV(2),  // D16 - MOSI - PB2
+    _BV(0),  // D17 - SS - PB0
+
+    _BV(7),  // D18 - A0 - PF7
+    _BV(6),  // D19 - A1 - PF6
+    _BV(5),  // D20 - A2 - PF5
+    _BV(4),  // D21 - A3 - PF4
+    _BV(1),  // D22 - A4 - PF1
+    _BV(0),  // D23 - A5 - PF0
+
+    _BV(5),  // D24 - PD5
+    _BV(7),  // D25 / D6 - A7 - PD7
+    _BV(4),  // D26 / D8 - A8 - PB4
+    _BV(5),  // D27 / D9 - A9 - PB5
+    _BV(6),  // D28 / D10 - A10 - PB6
+    _BV(6),  // D29 / D12 - A11 - PD6
 };
 
 const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    TIMER0B,        /* 3 */
-    NOT_ON_TIMER,
-    TIMER3A,        /* 5 */
-    TIMER4D,        /* 6 */
+    NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, TIMER0B, /* 3 */
+    NOT_ON_TIMER, TIMER3A,                             /* 5 */
+    TIMER4D,                                           /* 6 */
     NOT_ON_TIMER,
 
-    NOT_ON_TIMER,
-    TIMER1A,        /* 9 */
-    TIMER1B,        /* 10 */
-    TIMER0A,        /* 11 */
+    NOT_ON_TIMER, TIMER1A, /* 9 */
+    TIMER1B,               /* 10 */
+    TIMER0A,               /* 11 */
 
-    NOT_ON_TIMER,
-    TIMER4A,        /* 13 */
+    NOT_ON_TIMER, TIMER4A, /* 13 */
 
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
+    NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER,
 
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
-    NOT_ON_TIMER,
+    NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER, NOT_ON_TIMER,
 };
 
 const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
-    7,  // A0               PF7                 ADC7
-    6,  // A1               PF6                 ADC6
-    5,  // A2               PF5                 ADC5
-    4,  // A3               PF4                 ADC4
-    1,  // A4               PF1                 ADC1
-    0,  // A5               PF0                 ADC0
-    8,  // A6       D4      PD4                 ADC8
-    10, // A7       D6      PD7                 ADC10
-    11, // A8       D8      PB4                 ADC11
-    12, // A9       D9      PB5                 ADC12
-    13, // A10      D10     PB6                 ADC13
-    9   // A11      D12     PD6                 ADC9
+    7,   // A0               PF7                 ADC7
+    6,   // A1               PF6                 ADC6
+    5,   // A2               PF5                 ADC5
+    4,   // A3               PF4                 ADC4
+    1,   // A4               PF1                 ADC1
+    0,   // A5               PF0                 ADC0
+    8,   // A6       D4      PD4                 ADC8
+    10,  // A7       D6      PD7                 ADC10
+    11,  // A8       D8      PB4                 ADC11
+    12,  // A9       D9      PB5                 ADC12
+    13,  // A10      D10     PB6                 ADC13
+    9    // A11      D12     PD6                 ADC9
 };
 
 #endif /* ARDUINO_MAIN */
@@ -354,9 +316,9 @@ const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
 //
 // SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
 //                            pins are NOT connected to anything by default.
-#define SERIAL_PORT_MONITOR        Serial
-#define SERIAL_PORT_USBVIRTUAL     Serial
-#define SERIAL_PORT_HARDWARE       Serial1
-#define SERIAL_PORT_HARDWARE_OPEN  Serial1
+#define SERIAL_PORT_MONITOR Serial
+#define SERIAL_PORT_USBVIRTUAL Serial
+#define SERIAL_PORT_HARDWARE Serial1
+#define SERIAL_PORT_HARDWARE_OPEN Serial1
 
 #endif /* Pins_Arduino_h */
diff --git a/drivers/avr/ssd1306.c b/drivers/avr/ssd1306.c
index bb8938bba3..61d7a99531 100644
--- a/drivers/avr/ssd1306.c
+++ b/drivers/avr/ssd1306.c
@@ -1,325 +1,320 @@
 #ifdef SSD1306OLED
 
-#include "ssd1306.h"
-#include "i2c.h"
-#include <string.h>
-#include "print.h"
-#include "glcdfont.c"
-#ifdef ADAFRUIT_BLE_ENABLE
-#include "adafruit_ble.h"
-#endif
-#ifdef PROTOCOL_LUFA
-#include "lufa.h"
-#endif
-#include "sendchar.h"
-#include "timer.h"
+#    include "ssd1306.h"
+#    include "i2c.h"
+#    include <string.h>
+#    include "print.h"
+#    include "glcdfont.c"
+#    ifdef ADAFRUIT_BLE_ENABLE
+#        include "adafruit_ble.h"
+#    endif
+#    ifdef PROTOCOL_LUFA
+#        include "lufa.h"
+#    endif
+#    include "sendchar.h"
+#    include "timer.h"
 
 // Set this to 1 to help diagnose early startup problems
 // when testing power-on with ble.  Turn it off otherwise,
 // as the latency of printing most of the debug info messes
 // with the matrix scan, causing keys to drop.
-#define DEBUG_TO_SCREEN 0
+#    define DEBUG_TO_SCREEN 0
 
-//static uint16_t last_battery_update;
-//static uint32_t vbat;
+// static uint16_t last_battery_update;
+// static uint32_t vbat;
 //#define BatteryUpdateInterval 10000 /* milliseconds */
-#define ScreenOffInterval 300000 /* milliseconds */
-#if DEBUG_TO_SCREEN
+#    define ScreenOffInterval 300000 /* milliseconds */
+#    if DEBUG_TO_SCREEN
 static uint8_t displaying;
-#endif
+#    endif
 static uint16_t last_flush;
 
 // Write command sequence.
 // Returns true on success.
 static inline bool _send_cmd1(uint8_t cmd) {
-  bool res = false;
+    bool res = false;
 
-  if (i2c_start_write(SSD1306_ADDRESS)) {
-    xprintf("failed to start write to %d\n", SSD1306_ADDRESS);
-    goto done;
-  }
+    if (i2c_start_write(SSD1306_ADDRESS)) {
+        xprintf("failed to start write to %d\n", SSD1306_ADDRESS);
+        goto done;
+    }
 
-  if (i2c_master_write(0x0 /* command byte follows */)) {
-    print("failed to write control byte\n");
+    if (i2c_master_write(0x0 /* command byte follows */)) {
+        print("failed to write control byte\n");
 
-    goto done;
-  }
+        goto done;
+    }
 
-  if (i2c_master_write(cmd)) {
-    xprintf("failed to write command %d\n", cmd);
-    goto done;
-  }
-  res = true;
+    if (i2c_master_write(cmd)) {
+        xprintf("failed to write command %d\n", cmd);
+        goto done;
+    }
+    res = true;
 done:
-  i2c_master_stop();
-  return res;
+    i2c_master_stop();
+    return res;
 }
 
 // Write 2-byte command sequence.
 // Returns true on success
 static inline bool _send_cmd2(uint8_t cmd, uint8_t opr) {
-  if (!_send_cmd1(cmd)) {
-    return false;
-  }
-  return _send_cmd1(opr);
+    if (!_send_cmd1(cmd)) {
+        return false;
+    }
+    return _send_cmd1(opr);
 }
 
 // Write 3-byte command sequence.
 // Returns true on success
 static inline bool _send_cmd3(uint8_t cmd, uint8_t opr1, uint8_t opr2) {
-  if (!_send_cmd1(cmd)) {
-    return false;
-  }
-  if (!_send_cmd1(opr1)) {
-    return false;
-  }
-  return _send_cmd1(opr2);
+    if (!_send_cmd1(cmd)) {
+        return false;
+    }
+    if (!_send_cmd1(opr1)) {
+        return false;
+    }
+    return _send_cmd1(opr2);
 }
 
-#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;}
-#define send_cmd2(c,o) if (!_send_cmd2(c,o)) {goto done;}
-#define send_cmd3(c,o1,o2) if (!_send_cmd3(c,o1,o2)) {goto done;}
+#    define send_cmd1(c)      \
+        if (!_send_cmd1(c)) { \
+            goto done;        \
+        }
+#    define send_cmd2(c, o)      \
+        if (!_send_cmd2(c, o)) { \
+            goto done;           \
+        }
+#    define send_cmd3(c, o1, o2)      \
+        if (!_send_cmd3(c, o1, o2)) { \
+            goto done;                \
+        }
 
 static void clear_display(void) {
-  matrix_clear(&display);
-
-  // Clear all of the display bits (there can be random noise
-  // in the RAM on startup)
-  send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
-  send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
-
-  if (i2c_start_write(SSD1306_ADDRESS)) {
-    goto done;
-  }
-  if (i2c_master_write(0x40)) {
-    // Data mode
-    goto done;
-  }
-  for (uint8_t row = 0; row < MatrixRows; ++row) {
-    for (uint8_t col = 0; col < DisplayWidth; ++col) {
-      i2c_master_write(0);
+    matrix_clear(&display);
+
+    // Clear all of the display bits (there can be random noise
+    // in the RAM on startup)
+    send_cmd3(PageAddr, 0, (DisplayHeight / 8) - 1);
+    send_cmd3(ColumnAddr, 0, DisplayWidth - 1);
+
+    if (i2c_start_write(SSD1306_ADDRESS)) {
+        goto done;
+    }
+    if (i2c_master_write(0x40)) {
+        // Data mode
+        goto done;
+    }
+    for (uint8_t row = 0; row < MatrixRows; ++row) {
+        for (uint8_t col = 0; col < DisplayWidth; ++col) {
+            i2c_master_write(0);
+        }
     }
-  }
 
-  display.dirty = false;
+    display.dirty = false;
 
 done:
-  i2c_master_stop();
+    i2c_master_stop();
 }
 
-#if DEBUG_TO_SCREEN
-#undef sendchar
+#    if DEBUG_TO_SCREEN
+#        undef sendchar
 static int8_t capture_sendchar(uint8_t c) {
-  sendchar(c);
-  iota_gfx_write_char(c);
+    sendchar(c);
+    iota_gfx_write_char(c);
 
-  if (!displaying) {
-    iota_gfx_flush();
-  }
-  return 0;
+    if (!displaying) {
+        iota_gfx_flush();
+    }
+    return 0;
 }
-#endif
+#    endif
 
 bool iota_gfx_init(void) {
-  bool success = false;
+    bool success = false;
 
-  send_cmd1(DisplayOff);
-  send_cmd2(SetDisplayClockDiv, 0x80);
-  send_cmd2(SetMultiPlex, DisplayHeight - 1);
+    send_cmd1(DisplayOff);
+    send_cmd2(SetDisplayClockDiv, 0x80);
+    send_cmd2(SetMultiPlex, DisplayHeight - 1);
 
-  send_cmd2(SetDisplayOffset, 0);
+    send_cmd2(SetDisplayOffset, 0);
 
+    send_cmd1(SetStartLine | 0x0);
+    send_cmd2(SetChargePump, 0x14 /* Enable */);
+    send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
 
-  send_cmd1(SetStartLine | 0x0);
-  send_cmd2(SetChargePump, 0x14 /* Enable */);
-  send_cmd2(SetMemoryMode, 0 /* horizontal addressing */);
+#    ifdef OLED_ROTATE180
+    // the following Flip the display orientation 180 degrees
+    send_cmd1(SegRemap);
+    send_cmd1(ComScanInc);
+#    endif
+#    ifndef OLED_ROTATE180
+    // Flips the display orientation 0 degrees
+    send_cmd1(SegRemap | 0x1);
+    send_cmd1(ComScanDec);
+#    endif
 
-#ifdef OLED_ROTATE180
-// the following Flip the display orientation 180 degrees
-  send_cmd1(SegRemap);
-  send_cmd1(ComScanInc);
-#endif
-#ifndef OLED_ROTATE180
-// Flips the display orientation 0 degrees
-  send_cmd1(SegRemap | 0x1);
-  send_cmd1(ComScanDec);
-#endif
-  
-  send_cmd2(SetComPins, 0x2);
-  send_cmd2(SetContrast, 0x8f);
-  send_cmd2(SetPreCharge, 0xf1);
-  send_cmd2(SetVComDetect, 0x40);
-  send_cmd1(DisplayAllOnResume);
-  send_cmd1(NormalDisplay);
-  send_cmd1(DeActivateScroll);
-  send_cmd1(DisplayOn);
+    send_cmd2(SetComPins, 0x2);
+    send_cmd2(SetContrast, 0x8f);
+    send_cmd2(SetPreCharge, 0xf1);
+    send_cmd2(SetVComDetect, 0x40);
+    send_cmd1(DisplayAllOnResume);
+    send_cmd1(NormalDisplay);
+    send_cmd1(DeActivateScroll);
+    send_cmd1(DisplayOn);
 
-  send_cmd2(SetContrast, 0); // Dim
+    send_cmd2(SetContrast, 0);  // Dim
 
-  clear_display();
+    clear_display();
 
-  success = true;
+    success = true;
 
-  iota_gfx_flush();
+    iota_gfx_flush();
 
-#if DEBUG_TO_SCREEN
-  print_set_sendchar(capture_sendchar);
-#endif
+#    if DEBUG_TO_SCREEN
+    print_set_sendchar(capture_sendchar);
+#    endif
 
 done:
-  return success;
+    return success;
 }
 
 bool iota_gfx_off(void) {
-  bool success = false;
+    bool success = false;
 
-  send_cmd1(DisplayOff);
-  success = true;
+    send_cmd1(DisplayOff);
+    success = true;
 
 done:
-  return success;
-} 
+    return success;
+}
 
 bool iota_gfx_on(void) {
-  bool success = false;
+    bool success = false;
 
-  send_cmd1(DisplayOn);
-  success = true;
+    send_cmd1(DisplayOn);
+    success = true;
 
 done:
-  return success;
+    return success;
 }
 
 void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
-  *matrix->cursor = c;
-  ++matrix->cursor;
-
-  if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
-    // We went off the end; scroll the display upwards by one line
-    memmove(&matrix->display[0], &matrix->display[1],
-            MatrixCols * (MatrixRows - 1));
-    matrix->cursor = &matrix->display[MatrixRows - 1][0];
-    memset(matrix->cursor, ' ', MatrixCols);
-  }
+    *matrix->cursor = c;
+    ++matrix->cursor;
+
+    if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
+        // We went off the end; scroll the display upwards by one line
+        memmove(&matrix->display[0], &matrix->display[1], MatrixCols * (MatrixRows - 1));
+        matrix->cursor = &matrix->display[MatrixRows - 1][0];
+        memset(matrix->cursor, ' ', MatrixCols);
+    }
 }
 
 void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
-  matrix->dirty = true;
+    matrix->dirty = true;
 
-  if (c == '\n') {
-    // Clear to end of line from the cursor and then move to the
-    // start of the next line
-    uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
+    if (c == '\n') {
+        // Clear to end of line from the cursor and then move to the
+        // start of the next line
+        uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
 
-    while (cursor_col++ < MatrixCols) {
-      matrix_write_char_inner(matrix, ' ');
+        while (cursor_col++ < MatrixCols) {
+            matrix_write_char_inner(matrix, ' ');
+        }
+        return;
     }
-    return;
-  }
 
-  matrix_write_char_inner(matrix, c);
+    matrix_write_char_inner(matrix, c);
 }
 
-void iota_gfx_write_char(uint8_t c) {
-  matrix_write_char(&display, c);
-}
+void iota_gfx_write_char(uint8_t c) { matrix_write_char(&display, c); }
 
 void matrix_write(struct CharacterMatrix *matrix, const char *data) {
-  const char *end = data + strlen(data);
-  while (data < end) {
-    matrix_write_char(matrix, *data);
-    ++data;
-  }
+    const char *end = data + strlen(data);
+    while (data < end) {
+        matrix_write_char(matrix, *data);
+        ++data;
+    }
 }
 
-void iota_gfx_write(const char *data) {
-  matrix_write(&display, data);
-}
+void iota_gfx_write(const char *data) { matrix_write(&display, data); }
 
 void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
-  while (true) {
-    uint8_t c = pgm_read_byte(data);
-    if (c == 0) {
-      return;
+    while (true) {
+        uint8_t c = pgm_read_byte(data);
+        if (c == 0) {
+            return;
+        }
+        matrix_write_char(matrix, c);
+        ++data;
     }
-    matrix_write_char(matrix, c);
-    ++data;
-  }
 }
 
-void iota_gfx_write_P(const char *data) {
-  matrix_write_P(&display, data);
-}
+void iota_gfx_write_P(const char *data) { matrix_write_P(&display, data); }
 
 void matrix_clear(struct CharacterMatrix *matrix) {
-  memset(matrix->display, ' ', sizeof(matrix->display));
-  matrix->cursor = &matrix->display[0][0];
-  matrix->dirty = true;
+    memset(matrix->display, ' ', sizeof(matrix->display));
+    matrix->cursor = &matrix->display[0][0];
+    matrix->dirty  = true;
 }
 
-void iota_gfx_clear_screen(void) {
-  matrix_clear(&display);
-}
+void iota_gfx_clear_screen(void) { matrix_clear(&display); }
 
 void matrix_render(struct CharacterMatrix *matrix) {
-  last_flush = timer_read();
-  iota_gfx_on();
-#if DEBUG_TO_SCREEN
-  ++displaying;
-#endif
+    last_flush = timer_read();
+    iota_gfx_on();
+#    if DEBUG_TO_SCREEN
+    ++displaying;
+#    endif
+
+    // Move to the home position
+    send_cmd3(PageAddr, 0, MatrixRows - 1);
+    send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
+
+    if (i2c_start_write(SSD1306_ADDRESS)) {
+        goto done;
+    }
+    if (i2c_master_write(0x40)) {
+        // Data mode
+        goto done;
+    }
+
+    for (uint8_t row = 0; row < MatrixRows; ++row) {
+        for (uint8_t col = 0; col < MatrixCols; ++col) {
+            const uint8_t *glyph = font + (matrix->display[row][col] * (FontWidth - 1));
+
+            for (uint8_t glyphCol = 0; glyphCol < FontWidth - 1; ++glyphCol) {
+                uint8_t colBits = pgm_read_byte(glyph + glyphCol);
+                i2c_master_write(colBits);
+            }
 
-  // Move to the home position
-  send_cmd3(PageAddr, 0, MatrixRows - 1);
-  send_cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1);
-
-  if (i2c_start_write(SSD1306_ADDRESS)) {
-    goto done;
-  }
-  if (i2c_master_write(0x40)) {
-    // Data mode
-    goto done;
-  }
-
-  for (uint8_t row = 0; row < MatrixRows; ++row) {
-    for (uint8_t col = 0; col < MatrixCols; ++col) {
-      const uint8_t *glyph = font + (matrix->display[row][col] * (FontWidth - 1));
-
-      for (uint8_t glyphCol = 0; glyphCol < FontWidth - 1; ++glyphCol) {
-        uint8_t colBits = pgm_read_byte(glyph + glyphCol);
-        i2c_master_write(colBits);
-      }
-
-      // 1 column of space between chars (it's not included in the glyph)
-      i2c_master_write(0);
+            // 1 column of space between chars (it's not included in the glyph)
+            i2c_master_write(0);
+        }
     }
-  }
 
-  matrix->dirty = false;
+    matrix->dirty = false;
 
 done:
-  i2c_master_stop();
-#if DEBUG_TO_SCREEN
-  --displaying;
-#endif
+    i2c_master_stop();
+#    if DEBUG_TO_SCREEN
+    --displaying;
+#    endif
 }
 
-void iota_gfx_flush(void) {
-  matrix_render(&display);
-}
+void iota_gfx_flush(void) { matrix_render(&display); }
 
-__attribute__ ((weak))
-void iota_gfx_task_user(void) {
-}
+__attribute__((weak)) void iota_gfx_task_user(void) {}
 
 void iota_gfx_task(void) {
-  iota_gfx_task_user();
+    iota_gfx_task_user();
 
-  if (display.dirty) {
-    iota_gfx_flush();
-  }
+    if (display.dirty) {
+        iota_gfx_flush();
+    }
 
-  if (timer_elapsed(last_flush) > ScreenOffInterval) {
-    iota_gfx_off();
-  }
+    if (timer_elapsed(last_flush) > ScreenOffInterval) {
+        iota_gfx_off();
+    }
 }
 #endif
diff --git a/drivers/avr/ssd1306.h b/drivers/avr/ssd1306.h
index df6a75359f..825b0d7d5b 100644
--- a/drivers/avr/ssd1306.h
+++ b/drivers/avr/ssd1306.h
@@ -7,49 +7,49 @@
 #include "config.h"
 
 enum ssd1306_cmds {
-  DisplayOff = 0xAE,
-  DisplayOn = 0xAF,
-
-  SetContrast = 0x81,
-  DisplayAllOnResume = 0xA4,
-
-  DisplayAllOn = 0xA5,
-  NormalDisplay = 0xA6,
-  InvertDisplay = 0xA7,
-  SetDisplayOffset = 0xD3,
-  SetComPins = 0xda,
-  SetVComDetect = 0xdb,
-  SetDisplayClockDiv = 0xD5,
-  SetPreCharge = 0xd9,
-  SetMultiPlex = 0xa8,
-  SetLowColumn = 0x00,
-  SetHighColumn = 0x10,
-  SetStartLine = 0x40,
-
-  SetMemoryMode = 0x20,
-  ColumnAddr = 0x21,
-  PageAddr = 0x22,
-
-  ComScanInc = 0xc0,
-  ComScanDec = 0xc8,
-  SegRemap = 0xa0,
-  SetChargePump = 0x8d,
-  ExternalVcc = 0x01,
-  SwitchCapVcc = 0x02,
-
-  ActivateScroll = 0x2f,
-  DeActivateScroll = 0x2e,
-  SetVerticalScrollArea = 0xa3,
-  RightHorizontalScroll = 0x26,
-  LeftHorizontalScroll = 0x27,
-  VerticalAndRightHorizontalScroll = 0x29,
-  VerticalAndLeftHorizontalScroll = 0x2a,
+    DisplayOff = 0xAE,
+    DisplayOn  = 0xAF,
+
+    SetContrast        = 0x81,
+    DisplayAllOnResume = 0xA4,
+
+    DisplayAllOn       = 0xA5,
+    NormalDisplay      = 0xA6,
+    InvertDisplay      = 0xA7,
+    SetDisplayOffset   = 0xD3,
+    SetComPins         = 0xda,
+    SetVComDetect      = 0xdb,
+    SetDisplayClockDiv = 0xD5,
+    SetPreCharge       = 0xd9,
+    SetMultiPlex       = 0xa8,
+    SetLowColumn       = 0x00,
+    SetHighColumn      = 0x10,
+    SetStartLine       = 0x40,
+
+    SetMemoryMode = 0x20,
+    ColumnAddr    = 0x21,
+    PageAddr      = 0x22,
+
+    ComScanInc    = 0xc0,
+    ComScanDec    = 0xc8,
+    SegRemap      = 0xa0,
+    SetChargePump = 0x8d,
+    ExternalVcc   = 0x01,
+    SwitchCapVcc  = 0x02,
+
+    ActivateScroll                   = 0x2f,
+    DeActivateScroll                 = 0x2e,
+    SetVerticalScrollArea            = 0xa3,
+    RightHorizontalScroll            = 0x26,
+    LeftHorizontalScroll             = 0x27,
+    VerticalAndRightHorizontalScroll = 0x29,
+    VerticalAndLeftHorizontalScroll  = 0x2a,
 };
 
 // Controls the SSD1306 128x32 OLED display via i2c
 
 #ifndef SSD1306_ADDRESS
-#define SSD1306_ADDRESS 0x3C
+#    define SSD1306_ADDRESS 0x3C
 #endif
 
 #define DisplayHeight 32
@@ -62,9 +62,9 @@ enum ssd1306_cmds {
 #define MatrixCols (DisplayWidth / FontWidth)
 
 struct CharacterMatrix {
-  uint8_t display[MatrixRows][MatrixCols];
-  uint8_t *cursor;
-  bool dirty;
+    uint8_t  display[MatrixRows][MatrixCols];
+    uint8_t *cursor;
+    bool     dirty;
 };
 
 struct CharacterMatrix display;
@@ -88,6 +88,4 @@ void matrix_write(struct CharacterMatrix *matrix, const char *data);
 void matrix_write_P(struct CharacterMatrix *matrix, const char *data);
 void matrix_render(struct CharacterMatrix *matrix);
 
-
-
 #endif
diff --git a/drivers/avr/ws2812.c b/drivers/avr/ws2812.c
index 7c3cb5174d..0a02c6f7fd 100644
--- a/drivers/avr/ws2812.c
+++ b/drivers/avr/ws2812.c
@@ -1,25 +1,25 @@
 /*
-* light weight WS2812 lib V2.0b
-*
-* Controls WS2811/WS2812/WS2812B RGB-LEDs
-* Author: Tim (cpldcpu@gmail.com)
-*
-* Jan 18th, 2014  v2.0b Initial Version
-* Nov 29th, 2015  v2.3  Added SK6812RGBW support
-*
-* This program is free software: you can redistribute it and/or modify
-* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation, either version 2 of the License, or
-* (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
+ * light weight WS2812 lib V2.0b
+ *
+ * Controls WS2811/WS2812/WS2812B RGB-LEDs
+ * Author: Tim (cpldcpu@gmail.com)
+ *
+ * Jan 18th, 2014  v2.0b Initial Version
+ * Nov 29th, 2015  v2.3  Added SK6812RGBW support
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
 
 #include "ws2812.h"
 #include <avr/interrupt.h>
@@ -30,44 +30,40 @@
 #if !defined(LED_ARRAY) && defined(RGB_MATRIX_ENABLE)
 // LED color buffer
 LED_TYPE led[DRIVER_LED_TOTAL];
-  #define LED_ARRAY led
+#    define LED_ARRAY led
 #endif
 
 #ifdef RGBW_BB_TWI
 
 // Port for the I2C
-#define I2C_DDR DDRD
-#define I2C_PIN PIND
-#define I2C_PORT PORTD
+#    define I2C_DDR DDRD
+#    define I2C_PIN PIND
+#    define I2C_PORT PORTD
 
 // Pins to be used in the bit banging
-#define I2C_CLK 0
-#define I2C_DAT 1
-
-#define I2C_DATA_HI()\
-I2C_DDR &= ~ (1 << I2C_DAT);\
-I2C_PORT |= (1 << I2C_DAT);
-#define I2C_DATA_LO()\
-I2C_DDR |= (1 << I2C_DAT);\
-I2C_PORT &= ~ (1 << I2C_DAT);
-
-#define I2C_CLOCK_HI()\
-I2C_DDR &= ~ (1 << I2C_CLK);\
-I2C_PORT |= (1 << I2C_CLK);
-#define I2C_CLOCK_LO()\
-I2C_DDR |= (1 << I2C_CLK);\
-I2C_PORT &= ~ (1 << I2C_CLK);
-
-#define I2C_DELAY 1
-
-void I2C_WriteBit(unsigned char c)
-{
-    if (c > 0)
-    {
+#    define I2C_CLK 0
+#    define I2C_DAT 1
+
+#    define I2C_DATA_HI()           \
+        I2C_DDR &= ~(1 << I2C_DAT); \
+        I2C_PORT |= (1 << I2C_DAT);
+#    define I2C_DATA_LO()          \
+        I2C_DDR |= (1 << I2C_DAT); \
+        I2C_PORT &= ~(1 << I2C_DAT);
+
+#    define I2C_CLOCK_HI()          \
+        I2C_DDR &= ~(1 << I2C_CLK); \
+        I2C_PORT |= (1 << I2C_CLK);
+#    define I2C_CLOCK_LO()         \
+        I2C_DDR |= (1 << I2C_CLK); \
+        I2C_PORT &= ~(1 << I2C_CLK);
+
+#    define I2C_DELAY 1
+
+void I2C_WriteBit(unsigned char c) {
+    if (c > 0) {
         I2C_DATA_HI();
-    }
-    else
-    {
+    } else {
         I2C_DATA_LO();
     }
 
@@ -77,8 +73,7 @@ void I2C_WriteBit(unsigned char c)
     I2C_CLOCK_LO();
     _delay_us(I2C_DELAY);
 
-    if (c > 0)
-    {
+    if (c > 0) {
         I2C_DATA_LO();
     }
 
@@ -87,9 +82,8 @@ void I2C_WriteBit(unsigned char c)
 
 // Inits bitbanging port, must be called before using the functions below
 //
-void I2C_Init(void)
-{
-    I2C_PORT &= ~ ((1 << I2C_DAT) | (1 << I2C_CLK));
+void I2C_Init(void) {
+    I2C_PORT &= ~((1 << I2C_DAT) | (1 << I2C_CLK));
 
     I2C_CLOCK_HI();
     I2C_DATA_HI();
@@ -99,10 +93,9 @@ void I2C_Init(void)
 
 // Send a START Condition
 //
-void I2C_Start(void)
-{
+void I2C_Start(void) {
     // set both to high at the same time
-    I2C_DDR &= ~ ((1 << I2C_DAT) | (1 << I2C_CLK));
+    I2C_DDR &= ~((1 << I2C_DAT) | (1 << I2C_CLK));
     _delay_us(I2C_DELAY);
 
     I2C_DATA_LO();
@@ -114,8 +107,7 @@ void I2C_Start(void)
 
 // Send a STOP Condition
 //
-void I2C_Stop(void)
-{
+void I2C_Stop(void) {
     I2C_CLOCK_HI();
     _delay_us(I2C_DELAY);
 
@@ -125,106 +117,91 @@ void I2C_Stop(void)
 
 // write a byte to the I2C slave device
 //
-unsigned char I2C_Write(unsigned char c)
-{
-    for (char i = 0; i < 8; i++)
-    {
+unsigned char I2C_Write(unsigned char c) {
+    for (char i = 0; i < 8; i++) {
         I2C_WriteBit(c & 128);
 
         c <<= 1;
     }
 
-
     I2C_WriteBit(0);
     _delay_us(I2C_DELAY);
     _delay_us(I2C_DELAY);
 
     // _delay_us(I2C_DELAY);
-    //return I2C_ReadBit();
+    // return I2C_ReadBit();
     return 0;
 }
 
-
 #endif
 
 #ifdef RGB_MATRIX_ENABLE
 // Set an led in the buffer to a color
-void inline ws2812_setled(int i, uint8_t r, uint8_t g, uint8_t b)
-{
+void inline ws2812_setled(int i, uint8_t r, uint8_t g, uint8_t b) {
     led[i].r = r;
     led[i].g = g;
     led[i].b = b;
 }
 
-void ws2812_setled_all  (uint8_t r, uint8_t g, uint8_t b)
-{
-  for (int i = 0; i < sizeof(led)/sizeof(led[0]); i++) {
-    led[i].r = r;
-    led[i].g = g;
-    led[i].b = b;
-  }
+void ws2812_setled_all(uint8_t r, uint8_t g, uint8_t b) {
+    for (int i = 0; i < sizeof(led) / sizeof(led[0]); i++) {
+        led[i].r = r;
+        led[i].g = g;
+        led[i].b = b;
+    }
 }
 #endif
 
 // Setleds for standard RGB
-void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t leds)
-{
-   // ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin));
-   ws2812_setleds_pin(ledarray,leds, _BV(RGB_DI_PIN & 0xF));
+void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) {
+    // ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin));
+    ws2812_setleds_pin(ledarray, leds, _BV(RGB_DI_PIN & 0xF));
 }
 
-void inline ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask)
-{
-  // ws2812_DDRREG |= pinmask; // Enable DDR
-  // new universal format (DDR)
-  _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= pinmask;
+void inline ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask) {
+    // ws2812_DDRREG |= pinmask; // Enable DDR
+    // new universal format (DDR)
+    _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= pinmask;
 
-  ws2812_sendarray_mask((uint8_t*)ledarray,leds+leds+leds,pinmask);
-  _delay_us(50);
+    ws2812_sendarray_mask((uint8_t *)ledarray, leds + leds + leds, pinmask);
+    _delay_us(50);
 }
 
 // Setleds for SK6812RGBW
-void inline ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t leds)
-{
-
-  #ifdef RGBW_BB_TWI
+void inline ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t leds) {
+#ifdef RGBW_BB_TWI
     uint8_t sreg_prev, twcr_prev;
-    sreg_prev=SREG;
-    twcr_prev=TWCR;
+    sreg_prev = SREG;
+    twcr_prev = TWCR;
     cli();
-    TWCR &= ~(1<<TWEN);
+    TWCR &= ~(1 << TWEN);
     I2C_Init();
     I2C_Start();
     I2C_Write(0x84);
-    uint16_t datlen = leds<<2;
-    uint8_t curbyte;
-    uint8_t * data = (uint8_t*)ledarray;
+    uint16_t datlen = leds << 2;
+    uint8_t  curbyte;
+    uint8_t *data = (uint8_t *)ledarray;
     while (datlen--) {
-      curbyte=*data++;
-      I2C_Write(curbyte);
+        curbyte = *data++;
+        I2C_Write(curbyte);
     }
     I2C_Stop();
-    SREG=sreg_prev;
-    TWCR=twcr_prev;
-  #endif
-
-
-  // ws2812_DDRREG |= _BV(ws2812_pin); // Enable DDR
-  // new universal format (DDR)
-  _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= _BV(RGB_DI_PIN & 0xF);
+    SREG = sreg_prev;
+    TWCR = twcr_prev;
+#endif
 
-  ws2812_sendarray_mask((uint8_t*)ledarray,leds<<2,_BV(RGB_DI_PIN & 0xF));
+    // ws2812_DDRREG |= _BV(ws2812_pin); // Enable DDR
+    // new universal format (DDR)
+    _SFR_IO8((RGB_DI_PIN >> 4) + 1) |= _BV(RGB_DI_PIN & 0xF);
 
+    ws2812_sendarray_mask((uint8_t *)ledarray, leds << 2, _BV(RGB_DI_PIN & 0xF));
 
-  #ifndef RGBW_BB_TWI
+#ifndef RGBW_BB_TWI
     _delay_us(80);
-  #endif
+#endif
 }
 
-void ws2812_sendarray(uint8_t *data,uint16_t datlen)
-{
-  ws2812_sendarray_mask(data,datlen,_BV(RGB_DI_PIN & 0xF));
-}
+void ws2812_sendarray(uint8_t *data, uint16_t datlen) { ws2812_sendarray_mask(data, datlen, _BV(RGB_DI_PIN & 0xF)); }
 
 /*
   This routine writes an array of bytes with RGB values to the Dataout pin
@@ -232,136 +209,133 @@ void ws2812_sendarray(uint8_t *data,uint16_t datlen)
 */
 
 // Timing in ns
-#define w_zeropulse   350
-#define w_onepulse    900
+#define w_zeropulse 350
+#define w_onepulse 900
 #define w_totalperiod 1250
 
 // Fixed cycles used by the inner loop
-#define w_fixedlow    2
-#define w_fixedhigh   4
-#define w_fixedtotal  8
+#define w_fixedlow 2
+#define w_fixedhigh 4
+#define w_fixedtotal 8
 
 // Insert NOPs to match the timing, if possible
-#define w_zerocycles    (((F_CPU/1000)*w_zeropulse          )/1000000)
-#define w_onecycles     (((F_CPU/1000)*w_onepulse    +500000)/1000000)
-#define w_totalcycles   (((F_CPU/1000)*w_totalperiod +500000)/1000000)
+#define w_zerocycles (((F_CPU / 1000) * w_zeropulse) / 1000000)
+#define w_onecycles (((F_CPU / 1000) * w_onepulse + 500000) / 1000000)
+#define w_totalcycles (((F_CPU / 1000) * w_totalperiod + 500000) / 1000000)
 
 // w1 - nops between rising edge and falling edge - low
-#define w1 (w_zerocycles-w_fixedlow)
+#define w1 (w_zerocycles - w_fixedlow)
 // w2   nops between fe low and fe high
-#define w2 (w_onecycles-w_fixedhigh-w1)
+#define w2 (w_onecycles - w_fixedhigh - w1)
 // w3   nops to complete loop
-#define w3 (w_totalcycles-w_fixedtotal-w1-w2)
+#define w3 (w_totalcycles - w_fixedtotal - w1 - w2)
 
-#if w1>0
-  #define w1_nops w1
+#if w1 > 0
+#    define w1_nops w1
 #else
-  #define w1_nops  0
+#    define w1_nops 0
 #endif
 
 // The only critical timing parameter is the minimum pulse length of the "0"
 // Warn or throw error if this timing can not be met with current F_CPU settings.
-#define w_lowtime ((w1_nops+w_fixedlow)*1000000)/(F_CPU/1000)
-#if w_lowtime>550
-   #error "Light_ws2812: Sorry, the clock speed is too low. Did you set F_CPU correctly?"
-#elif w_lowtime>450
-   #warning "Light_ws2812: The timing is critical and may only work on WS2812B, not on WS2812(S)."
-   #warning "Please consider a higher clockspeed, if possible"
+#define w_lowtime ((w1_nops + w_fixedlow) * 1000000) / (F_CPU / 1000)
+#if w_lowtime > 550
+#    error "Light_ws2812: Sorry, the clock speed is too low. Did you set F_CPU correctly?"
+#elif w_lowtime > 450
+#    warning "Light_ws2812: The timing is critical and may only work on WS2812B, not on WS2812(S)."
+#    warning "Please consider a higher clockspeed, if possible"
 #endif
 
-#if w2>0
-#define w2_nops w2
+#if w2 > 0
+#    define w2_nops w2
 #else
-#define w2_nops  0
+#    define w2_nops 0
 #endif
 
-#if w3>0
-#define w3_nops w3
+#if w3 > 0
+#    define w3_nops w3
 #else
-#define w3_nops  0
+#    define w3_nops 0
 #endif
 
-#define w_nop1  "nop      \n\t"
-#define w_nop2  "rjmp .+0 \n\t"
-#define w_nop4  w_nop2 w_nop2
-#define w_nop8  w_nop4 w_nop4
+#define w_nop1 "nop      \n\t"
+#define w_nop2 "rjmp .+0 \n\t"
+#define w_nop4 w_nop2 w_nop2
+#define w_nop8 w_nop4 w_nop4
 #define w_nop16 w_nop8 w_nop8
 
-void inline ws2812_sendarray_mask(uint8_t *data,uint16_t datlen,uint8_t maskhi)
-{
-  uint8_t curbyte,ctr,masklo;
-  uint8_t sreg_prev;
-
-  // masklo  =~maskhi&ws2812_PORTREG;
-  // maskhi |=        ws2812_PORTREG;
-  masklo  =~maskhi&_SFR_IO8((RGB_DI_PIN >> 4) + 2);
-  maskhi |=        _SFR_IO8((RGB_DI_PIN >> 4) + 2);
-  sreg_prev=SREG;
-  cli();
-
-  while (datlen--) {
-    curbyte=(*data++);
-
-    asm volatile(
-    "       ldi   %0,8  \n\t"
-    "loop%=:            \n\t"
-    "       out   %2,%3 \n\t"    //  '1' [01] '0' [01] - re
-#if (w1_nops&1)
-w_nop1
+void inline ws2812_sendarray_mask(uint8_t *data, uint16_t datlen, uint8_t maskhi) {
+    uint8_t curbyte, ctr, masklo;
+    uint8_t sreg_prev;
+
+    // masklo  =~maskhi&ws2812_PORTREG;
+    // maskhi |=        ws2812_PORTREG;
+    masklo = ~maskhi & _SFR_IO8((RGB_DI_PIN >> 4) + 2);
+    maskhi |= _SFR_IO8((RGB_DI_PIN >> 4) + 2);
+    sreg_prev = SREG;
+    cli();
+
+    while (datlen--) {
+        curbyte = (*data++);
+
+        asm volatile("       ldi   %0,8  \n\t"
+                     "loop%=:            \n\t"
+                     "       out   %2,%3 \n\t"  //  '1' [01] '0' [01] - re
+#if (w1_nops & 1)
+                     w_nop1
 #endif
-#if (w1_nops&2)
-w_nop2
+#if (w1_nops & 2)
+                         w_nop2
 #endif
-#if (w1_nops&4)
-w_nop4
+#if (w1_nops & 4)
+                             w_nop4
 #endif
-#if (w1_nops&8)
-w_nop8
+#if (w1_nops & 8)
+                                 w_nop8
 #endif
-#if (w1_nops&16)
-w_nop16
+#if (w1_nops & 16)
+                                     w_nop16
 #endif
-    "       sbrs  %1,7  \n\t"    //  '1' [03] '0' [02]
-    "       out   %2,%4 \n\t"    //  '1' [--] '0' [03] - fe-low
-    "       lsl   %1    \n\t"    //  '1' [04] '0' [04]
-#if (w2_nops&1)
-  w_nop1
+                     "       sbrs  %1,7  \n\t"  //  '1' [03] '0' [02]
+                     "       out   %2,%4 \n\t"  //  '1' [--] '0' [03] - fe-low
+                     "       lsl   %1    \n\t"  //  '1' [04] '0' [04]
+#if (w2_nops & 1)
+                     w_nop1
 #endif
-#if (w2_nops&2)
-  w_nop2
+#if (w2_nops & 2)
+                         w_nop2
 #endif
-#if (w2_nops&4)
-  w_nop4
+#if (w2_nops & 4)
+                             w_nop4
 #endif
-#if (w2_nops&8)
-  w_nop8
+#if (w2_nops & 8)
+                                 w_nop8
 #endif
-#if (w2_nops&16)
-  w_nop16
+#if (w2_nops & 16)
+                                     w_nop16
 #endif
-    "       out   %2,%4 \n\t"    //  '1' [+1] '0' [+1] - fe-high
-#if (w3_nops&1)
-w_nop1
+                     "       out   %2,%4 \n\t"  //  '1' [+1] '0' [+1] - fe-high
+#if (w3_nops & 1)
+                     w_nop1
 #endif
-#if (w3_nops&2)
-w_nop2
+#if (w3_nops & 2)
+                         w_nop2
 #endif
-#if (w3_nops&4)
-w_nop4
+#if (w3_nops & 4)
+                             w_nop4
 #endif
-#if (w3_nops&8)
-w_nop8
+#if (w3_nops & 8)
+                                 w_nop8
 #endif
-#if (w3_nops&16)
-w_nop16
+#if (w3_nops & 16)
+                                     w_nop16
 #endif
 
-    "       dec   %0    \n\t"    //  '1' [+2] '0' [+2]
-    "       brne  loop%=\n\t"    //  '1' [+3] '0' [+4]
-    :	"=&d" (ctr)
-    :	"r" (curbyte), "I" (_SFR_IO_ADDR(_SFR_IO8((RGB_DI_PIN >> 4) + 2))), "r" (maskhi), "r" (masklo)
-    );
-  }
+                     "       dec   %0    \n\t"  //  '1' [+2] '0' [+2]
+                     "       brne  loop%=\n\t"  //  '1' [+3] '0' [+4]
+                     : "=&d"(ctr)
+                     : "r"(curbyte), "I"(_SFR_IO_ADDR(_SFR_IO8((RGB_DI_PIN >> 4) + 2))), "r"(maskhi), "r"(masklo));
+    }
 
-  SREG=sreg_prev;
+    SREG = sreg_prev;
 }
diff --git a/drivers/avr/ws2812.h b/drivers/avr/ws2812.h
index 95f540b184..a9dd897185 100644
--- a/drivers/avr/ws2812.h
+++ b/drivers/avr/ws2812.h
@@ -43,12 +43,12 @@
  *         - Wait 50�s to reset the LEDs
  */
 #ifdef RGB_MATRIX_ENABLE
-void ws2812_setled      (int index, uint8_t r, uint8_t g, uint8_t b);
-void ws2812_setled_all  (uint8_t r, uint8_t g, uint8_t b);
+void ws2812_setled(int index, uint8_t r, uint8_t g, uint8_t b);
+void ws2812_setled_all(uint8_t r, uint8_t g, uint8_t b);
 #endif
 
-void ws2812_setleds     (LED_TYPE *ledarray, uint16_t number_of_leds);
-void ws2812_setleds_pin (LED_TYPE *ledarray, uint16_t number_of_leds,uint8_t pinmask);
+void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds);
+void ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t number_of_leds, uint8_t pinmask);
 void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds);
 
 /*
@@ -58,18 +58,17 @@ void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds);
  * The length is the number of bytes to send - three per LED.
  */
 
-void ws2812_sendarray     (uint8_t *array,uint16_t length);
-void ws2812_sendarray_mask(uint8_t *array,uint16_t length, uint8_t pinmask);
-
+void ws2812_sendarray(uint8_t *array, uint16_t length);
+void ws2812_sendarray_mask(uint8_t *array, uint16_t length, uint8_t pinmask);
 
 /*
  * Internal defines
  */
 #ifndef CONCAT
-#define CONCAT(a, b)            a ## b
+#    define CONCAT(a, b) a##b
 #endif
 #ifndef CONCAT_EXP
-#define CONCAT_EXP(a, b)   CONCAT(a, b)
+#    define CONCAT_EXP(a, b) CONCAT(a, b)
 #endif
 
 #endif /* LIGHT_WS2812_H_ */
diff --git a/drivers/boards/GENERIC_STM32_F303XC/board.c b/drivers/boards/GENERIC_STM32_F303XC/board.c
index 4331155df4..60c191d9b1 100644
--- a/drivers/boards/GENERIC_STM32_F303XC/board.c
+++ b/drivers/boards/GENERIC_STM32_F303XC/board.c
@@ -23,42 +23,33 @@
  *          This variable is used by the HAL when initializing the PAL driver.
  */
 const PALConfig pal_default_config = {
-#if STM32_HAS_GPIOA
-  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
-   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
-#endif
-#if STM32_HAS_GPIOB
-  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
-   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
-#endif
-#if STM32_HAS_GPIOC
-  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
-   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
-#endif
-#if STM32_HAS_GPIOD
-  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
-   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
-#endif
-#if STM32_HAS_GPIOE
-  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
-   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
-#endif
-#if STM32_HAS_GPIOF
-  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
-   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
-#endif
-#if STM32_HAS_GPIOG
-  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
-   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
-#endif
-#if STM32_HAS_GPIOH
-  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
-   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
-#endif
-#if STM32_HAS_GPIOI
-  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
-   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
-#endif
+#    if STM32_HAS_GPIOA
+    {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
+#    endif
+#    if STM32_HAS_GPIOB
+    {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
+#    endif
+#    if STM32_HAS_GPIOC
+    {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
+#    endif
+#    if STM32_HAS_GPIOD
+    {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
+#    endif
+#    if STM32_HAS_GPIOE
+    {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
+#    endif
+#    if STM32_HAS_GPIOF
+    {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
+#    endif
+#    if STM32_HAS_GPIOG
+    {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
+#    endif
+#    if STM32_HAS_GPIOH
+    {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
+#    endif
+#    if STM32_HAS_GPIOI
+    {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
+#    endif
 };
 #endif
 
@@ -70,8 +61,8 @@ void enter_bootloader_mode_if_requested(void);
  *          and before any other initialization.
  */
 void __early_init(void) {
-  enter_bootloader_mode_if_requested();
-  stm32_clock_init();
+    enter_bootloader_mode_if_requested();
+    stm32_clock_init();
 }
 
 #if HAL_USE_SDC || defined(__DOXYGEN__)
@@ -79,20 +70,18 @@ void __early_init(void) {
  * @brief   SDC card detection.
  */
 bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return true;
+    (void)sdcp;
+    /* TODO: Fill the implementation.*/
+    return true;
 }
 
 /**
  * @brief   SDC card write protection detection.
  */
 bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return false;
+    (void)sdcp;
+    /* TODO: Fill the implementation.*/
+    return false;
 }
 #endif /* HAL_USE_SDC */
 
@@ -101,20 +90,18 @@ bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
  * @brief   MMC_SPI card detection.
  */
 bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return true;
+    (void)mmcp;
+    /* TODO: Fill the implementation.*/
+    return true;
 }
 
 /**
  * @brief   MMC_SPI card write protection detection.
  */
 bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return false;
+    (void)mmcp;
+    /* TODO: Fill the implementation.*/
+    return false;
 }
 #endif
 
@@ -122,5 +109,4 @@ bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
  * @brief   Board-specific initialization code.
  * @todo    Add your board-specific code, if any.
  */
-void boardInit(void) {
-}
+void boardInit(void) {}
diff --git a/drivers/boards/GENERIC_STM32_F303XC/board.h b/drivers/boards/GENERIC_STM32_F303XC/board.h
index 11120dfd74..3579c82770 100644
--- a/drivers/boards/GENERIC_STM32_F303XC/board.h
+++ b/drivers/boards/GENERIC_STM32_F303XC/board.h
@@ -25,20 +25,20 @@
  * Board identifier.
  */
 #define BOARD_GENERIC_STM32_F303XC
-#define BOARD_NAME                  "STM32_F303"
+#define BOARD_NAME "STM32_F303"
 
 /*
  * Board oscillators-related settings.
  * NOTE: LSE not fitted.
  */
 #if !defined(STM32_LSECLK)
-#define STM32_LSECLK                0U
+#    define STM32_LSECLK 0U
 #endif
 
-#define STM32_LSEDRV                (3U << 3U)
+#define STM32_LSEDRV (3U << 3U)
 
 #if !defined(STM32_HSECLK)
-#define STM32_HSECLK                8000000U
+#    define STM32_HSECLK 8000000U
 #endif
 
 // #define STM32_HSE_BYPASS
@@ -51,178 +51,177 @@
 /*
  * IO pins assignments.
  */
-#define GPIOA_PIN0       0U
-#define GPIOA_PIN1       1U
-#define GPIOA_PIN2       2U
-#define GPIOA_PIN3       3U
-#define GPIOA_PIN4       4U
-#define GPIOA_PIN5       5U
-#define GPIOA_PIN6       6U
-#define GPIOA_PIN7       7U
-#define GPIOA_PIN8       8U
-#define GPIOA_PIN9       9U
-#define GPIOA_PIN10      10U
-#define GPIOA_USB_DM     11U
-#define GPIOA_USB_DP     12U
-#define GPIOA_SWDIO      13U
-#define GPIOA_SWCLK      14U
-#define GPIOA_PIN15      15U
-
-#define GPIOB_PIN0       0U
-#define GPIOB_PIN1       1U
-#define GPIOB_PIN2       2U
-#define GPIOB_PIN3       3U
-#define GPIOB_PIN4       4U
-#define GPIOB_PIN5       5U
-#define GPIOB_PIN6       6U
-#define GPIOB_PIN7       7U
-#define GPIOB_PIN8       8U
-#define GPIOB_PIN9       9U
-#define GPIOB_PIN10      10U
-#define GPIOB_PIN11      11U
-#define GPIOB_PIN12      12U
-#define GPIOB_PIN13      13U
-#define GPIOB_PIN14      14U
-#define GPIOB_PIN15      15U
-
-#define GPIOC_PIN0       0U
-#define GPIOC_PIN1       1U
-#define GPIOC_PIN2       2U
-#define GPIOC_PIN3       3U
-#define GPIOC_PIN4       4U
-#define GPIOC_PIN5       5U
-#define GPIOC_PIN6       6U
-#define GPIOC_PIN7       7U
-#define GPIOC_PIN8       8U
-#define GPIOC_PIN9       9U
-#define GPIOC_PIN10      10U
-#define GPIOC_PIN11      11U
-#define GPIOC_PIN12      12U
-#define GPIOC_PIN13      13U
-#define GPIOC_PIN14      14U
-#define GPIOC_PIN15      15U
-
-#define GPIOD_PIN0       0U
-#define GPIOD_PIN1       1U
-#define GPIOD_PIN2       2U
-#define GPIOD_PIN3       3U
-#define GPIOD_PIN4       4U
-#define GPIOD_PIN5       5U
-#define GPIOD_PIN6       6U
-#define GPIOD_PIN7       7U
-#define GPIOD_PIN8       8U
-#define GPIOD_PIN9       9U
-#define GPIOD_PIN10      10U
-#define GPIOD_PIN11      11U
-#define GPIOD_PIN12      12U
-#define GPIOD_PIN13      13U
-#define GPIOD_PIN14      14U
-#define GPIOD_PIN15      15U
-
-#define GPIOE_PIN0       0U
-#define GPIOE_PIN1       1U
-#define GPIOE_PIN2       2U
-#define GPIOE_PIN3       3U
-#define GPIOE_PIN4       4U
-#define GPIOE_PIN5       5U
-#define GPIOE_PIN6       6U
-#define GPIOE_PIN7       7U
-#define GPIOE_PIN8       8U
-#define GPIOE_PIN9       9U
-#define GPIOE_PIN10      10U
-#define GPIOE_PIN11      11U
-#define GPIOE_PIN12      12U
-#define GPIOE_PIN13      13U
-#define GPIOE_PIN14      14U
-#define GPIOE_PIN15      15U
-
-#define GPIOF_I2C2_SDA   0U
-#define GPIOF_I2C2_SCL   1U
-#define GPIOF_PIN2       2U
-#define GPIOF_PIN3       3U
-#define GPIOF_PIN4       4U
-#define GPIOF_PIN5       5U
-#define GPIOF_PIN6       6U
-#define GPIOF_PIN7       7U
-#define GPIOF_PIN8       8U
-#define GPIOF_PIN9       9U
-#define GPIOF_PIN10      10U
-#define GPIOF_PIN11      11U
-#define GPIOF_PIN12      12U
-#define GPIOF_PIN13      13U
-#define GPIOF_PIN14      14U
-#define GPIOF_PIN15      15U
-
-#define GPIOG_PIN0       0U
-#define GPIOG_PIN1       1U
-#define GPIOG_PIN2       2U
-#define GPIOG_PIN3       3U
-#define GPIOG_PIN4       4U
-#define GPIOG_PIN5       5U
-#define GPIOG_PIN6       6U
-#define GPIOG_PIN7       7U
-#define GPIOG_PIN8       8U
-#define GPIOG_PIN9       9U
-#define GPIOG_PIN10      10U
-#define GPIOG_PIN11      11U
-#define GPIOG_PIN12      12U
-#define GPIOG_PIN13      13U
-#define GPIOG_PIN14      14U
-#define GPIOG_PIN15      15U
-
-#define GPIOH_PIN0       0U
-#define GPIOH_PIN1       1U
-#define GPIOH_PIN2       2U
-#define GPIOH_PIN3       3U
-#define GPIOH_PIN4       4U
-#define GPIOH_PIN5       5U
-#define GPIOH_PIN6       6U
-#define GPIOH_PIN7       7U
-#define GPIOH_PIN8       8U
-#define GPIOH_PIN9       9U
-#define GPIOH_PIN10      10U
-#define GPIOH_PIN11      11U
-#define GPIOH_PIN12      12U
-#define GPIOH_PIN13      13U
-#define GPIOH_PIN14      14U
-#define GPIOH_PIN15      15U
+#define GPIOA_PIN0 0U
+#define GPIOA_PIN1 1U
+#define GPIOA_PIN2 2U
+#define GPIOA_PIN3 3U
+#define GPIOA_PIN4 4U
+#define GPIOA_PIN5 5U
+#define GPIOA_PIN6 6U
+#define GPIOA_PIN7 7U
+#define GPIOA_PIN8 8U
+#define GPIOA_PIN9 9U
+#define GPIOA_PIN10 10U
+#define GPIOA_USB_DM 11U
+#define GPIOA_USB_DP 12U
+#define GPIOA_SWDIO 13U
+#define GPIOA_SWCLK 14U
+#define GPIOA_PIN15 15U
+
+#define GPIOB_PIN0 0U
+#define GPIOB_PIN1 1U
+#define GPIOB_PIN2 2U
+#define GPIOB_PIN3 3U
+#define GPIOB_PIN4 4U
+#define GPIOB_PIN5 5U
+#define GPIOB_PIN6 6U
+#define GPIOB_PIN7 7U
+#define GPIOB_PIN8 8U
+#define GPIOB_PIN9 9U
+#define GPIOB_PIN10 10U
+#define GPIOB_PIN11 11U
+#define GPIOB_PIN12 12U
+#define GPIOB_PIN13 13U
+#define GPIOB_PIN14 14U
+#define GPIOB_PIN15 15U
+
+#define GPIOC_PIN0 0U
+#define GPIOC_PIN1 1U
+#define GPIOC_PIN2 2U
+#define GPIOC_PIN3 3U
+#define GPIOC_PIN4 4U
+#define GPIOC_PIN5 5U
+#define GPIOC_PIN6 6U
+#define GPIOC_PIN7 7U
+#define GPIOC_PIN8 8U
+#define GPIOC_PIN9 9U
+#define GPIOC_PIN10 10U
+#define GPIOC_PIN11 11U
+#define GPIOC_PIN12 12U
+#define GPIOC_PIN13 13U
+#define GPIOC_PIN14 14U
+#define GPIOC_PIN15 15U
+
+#define GPIOD_PIN0 0U
+#define GPIOD_PIN1 1U
+#define GPIOD_PIN2 2U
+#define GPIOD_PIN3 3U
+#define GPIOD_PIN4 4U
+#define GPIOD_PIN5 5U
+#define GPIOD_PIN6 6U
+#define GPIOD_PIN7 7U
+#define GPIOD_PIN8 8U
+#define GPIOD_PIN9 9U
+#define GPIOD_PIN10 10U
+#define GPIOD_PIN11 11U
+#define GPIOD_PIN12 12U
+#define GPIOD_PIN13 13U
+#define GPIOD_PIN14 14U
+#define GPIOD_PIN15 15U
+
+#define GPIOE_PIN0 0U
+#define GPIOE_PIN1 1U
+#define GPIOE_PIN2 2U
+#define GPIOE_PIN3 3U
+#define GPIOE_PIN4 4U
+#define GPIOE_PIN5 5U
+#define GPIOE_PIN6 6U
+#define GPIOE_PIN7 7U
+#define GPIOE_PIN8 8U
+#define GPIOE_PIN9 9U
+#define GPIOE_PIN10 10U
+#define GPIOE_PIN11 11U
+#define GPIOE_PIN12 12U
+#define GPIOE_PIN13 13U
+#define GPIOE_PIN14 14U
+#define GPIOE_PIN15 15U
+
+#define GPIOF_I2C2_SDA 0U
+#define GPIOF_I2C2_SCL 1U
+#define GPIOF_PIN2 2U
+#define GPIOF_PIN3 3U
+#define GPIOF_PIN4 4U
+#define GPIOF_PIN5 5U
+#define GPIOF_PIN6 6U
+#define GPIOF_PIN7 7U
+#define GPIOF_PIN8 8U
+#define GPIOF_PIN9 9U
+#define GPIOF_PIN10 10U
+#define GPIOF_PIN11 11U
+#define GPIOF_PIN12 12U
+#define GPIOF_PIN13 13U
+#define GPIOF_PIN14 14U
+#define GPIOF_PIN15 15U
+
+#define GPIOG_PIN0 0U
+#define GPIOG_PIN1 1U
+#define GPIOG_PIN2 2U
+#define GPIOG_PIN3 3U
+#define GPIOG_PIN4 4U
+#define GPIOG_PIN5 5U
+#define GPIOG_PIN6 6U
+#define GPIOG_PIN7 7U
+#define GPIOG_PIN8 8U
+#define GPIOG_PIN9 9U
+#define GPIOG_PIN10 10U
+#define GPIOG_PIN11 11U
+#define GPIOG_PIN12 12U
+#define GPIOG_PIN13 13U
+#define GPIOG_PIN14 14U
+#define GPIOG_PIN15 15U
+
+#define GPIOH_PIN0 0U
+#define GPIOH_PIN1 1U
+#define GPIOH_PIN2 2U
+#define GPIOH_PIN3 3U
+#define GPIOH_PIN4 4U
+#define GPIOH_PIN5 5U
+#define GPIOH_PIN6 6U
+#define GPIOH_PIN7 7U
+#define GPIOH_PIN8 8U
+#define GPIOH_PIN9 9U
+#define GPIOH_PIN10 10U
+#define GPIOH_PIN11 11U
+#define GPIOH_PIN12 12U
+#define GPIOH_PIN13 13U
+#define GPIOH_PIN14 14U
+#define GPIOH_PIN15 15U
 
 /*
  * IO lines assignments.
  */
-#define LINE_L3GD20_SDI             PAL_LINE(GPIOA, 7U)
-#define LINE_USB_DM                 PAL_LINE(GPIOA, 11U)
-#define LINE_USB_DP                 PAL_LINE(GPIOA, 12U)
-#define LINE_SWDIO                  PAL_LINE(GPIOA, 13U)
-#define LINE_SWCLK                  PAL_LINE(GPIOA, 14U)
-
-#define LINE_PIN6               PAL_LINE(GPIOF, 0U)
-#define LINE_PIN7               PAL_LINE(GPIOF, 1U)
+#define LINE_L3GD20_SDI PAL_LINE(GPIOA, 7U)
+#define LINE_USB_DM PAL_LINE(GPIOA, 11U)
+#define LINE_USB_DP PAL_LINE(GPIOA, 12U)
+#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
+#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
 
-#define LINE_CAPS_LOCK               PAL_LINE(GPIOB, 7U)
+#define LINE_PIN6 PAL_LINE(GPIOF, 0U)
+#define LINE_PIN7 PAL_LINE(GPIOF, 1U)
 
+#define LINE_CAPS_LOCK PAL_LINE(GPIOB, 7U)
 
 /*
  * I/O ports initial setup, this configuration is established soon after reset
  * in the initialization code.
  * Please refer to the STM32 Reference Manual for details.
  */
-#define PIN_MODE_INPUT(n)           (0U << ((n) * 2U))
-#define PIN_MODE_OUTPUT(n)          (1U << ((n) * 2U))
-#define PIN_MODE_ALTERNATE(n)       (2U << ((n) * 2U))
-#define PIN_MODE_ANALOG(n)          (3U << ((n) * 2U))
-#define PIN_ODR_LOW(n)              (0U << (n))
-#define PIN_ODR_HIGH(n)             (1U << (n))
-#define PIN_OTYPE_PUSHPULL(n)       (0U << (n))
-#define PIN_OTYPE_OPENDRAIN(n)      (1U << (n))
-#define PIN_OSPEED_VERYLOW(n)       (0U << ((n) * 2U))
-#define PIN_OSPEED_LOW(n)           (1U << ((n) * 2U))
-#define PIN_OSPEED_MEDIUM(n)        (2U << ((n) * 2U))
-#define PIN_OSPEED_HIGH(n)          (3U << ((n) * 2U))
-#define PIN_PUPDR_FLOATING(n)       (0U << ((n) * 2U))
-#define PIN_PUPDR_PULLUP(n)         (1U << ((n) * 2U))
-#define PIN_PUPDR_PULLDOWN(n)       (2U << ((n) * 2U))
-#define PIN_AFIO_AF(n, v)           ((v) << (((n) % 8U) * 4U))
+#define PIN_MODE_INPUT(n) (0U << ((n)*2U))
+#define PIN_MODE_OUTPUT(n) (1U << ((n)*2U))
+#define PIN_MODE_ALTERNATE(n) (2U << ((n)*2U))
+#define PIN_MODE_ANALOG(n) (3U << ((n)*2U))
+#define PIN_ODR_LOW(n) (0U << (n))
+#define PIN_ODR_HIGH(n) (1U << (n))
+#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
+#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
+#define PIN_OSPEED_VERYLOW(n) (0U << ((n)*2U))
+#define PIN_OSPEED_LOW(n) (1U << ((n)*2U))
+#define PIN_OSPEED_MEDIUM(n) (2U << ((n)*2U))
+#define PIN_OSPEED_HIGH(n) (3U << ((n)*2U))
+#define PIN_PUPDR_FLOATING(n) (0U << ((n)*2U))
+#define PIN_PUPDR_PULLUP(n) (1U << ((n)*2U))
+#define PIN_PUPDR_PULLDOWN(n) (2U << ((n)*2U))
+#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
 
 /*
  * GPIOA setup:
@@ -244,102 +243,13 @@
  * PA14 - SWCLK                     (alternate 0).
  * PA15 - ROW4
  */
-#define VAL_GPIOA_MODER             (PIN_MODE_INPUT(GPIOA_PIN0) |         \
-                                     PIN_MODE_ALTERNATE(GPIOA_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN5) |   \
-                                     PIN_MODE_INPUT(GPIOA_PIN6) |  \
-                                     PIN_MODE_INPUT(GPIOA_PIN7) |  \
-                                     PIN_MODE_INPUT(GPIOA_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOA_PIN10) |          \
-                                     PIN_MODE_ALTERNATE(GPIOA_USB_DM) |     \
-                                     PIN_MODE_ALTERNATE(GPIOA_USB_DP) |     \
-                                     PIN_MODE_ALTERNATE(GPIOA_SWDIO) |      \
-                                     PIN_MODE_ALTERNATE(GPIOA_SWCLK) |      \
-                                     PIN_MODE_INPUT(GPIOA_PIN15))
-#define VAL_GPIOA_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOA_PIN0) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN5) |   \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN6) |  \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN7) |  \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
-#define VAL_GPIOA_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOA_PIN0) |     \
-                                     PIN_OSPEED_HIGH(GPIOA_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN5) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN6) |     \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN7) |     \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN10) |      \
-                                     PIN_OSPEED_HIGH(GPIOA_USB_DM) |        \
-                                     PIN_OSPEED_VERYLOW(GPIOA_USB_DP) |     \
-                                     PIN_OSPEED_HIGH(GPIOA_SWDIO) |         \
-                                     PIN_OSPEED_HIGH(GPIOA_SWCLK) |         \
-                                     PIN_OSPEED_VERYLOW(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR             (PIN_PUPDR_FLOATING(GPIOA_PIN0) |     \
-                                     PIN_PUPDR_FLOATING(GPIOA_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN5) |   \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN6) |    \
-                                     PIN_PUPDR_FLOATING(GPIOA_PIN7) |  \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN10) |        \
-                                     PIN_PUPDR_FLOATING(GPIOA_USB_DM) |     \
-                                     PIN_PUPDR_FLOATING(GPIOA_USB_DP) |     \
-                                     PIN_PUPDR_PULLUP(GPIOA_SWDIO) |        \
-                                     PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) |      \
-                                     PIN_PUPDR_PULLUP(GPIOA_PIN15))
-#define VAL_GPIOA_ODR               (PIN_ODR_HIGH(GPIOA_PIN0) |           \
-                                     PIN_ODR_HIGH(GPIOA_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN5) |         \
-                                     PIN_ODR_HIGH(GPIOA_PIN6) |        \
-                                     PIN_ODR_HIGH(GPIOA_PIN7) |        \
-                                     PIN_ODR_HIGH(GPIOA_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOA_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOA_USB_DM) |           \
-                                     PIN_ODR_HIGH(GPIOA_USB_DP) |           \
-                                     PIN_ODR_HIGH(GPIOA_SWDIO) |            \
-                                     PIN_ODR_HIGH(GPIOA_SWCLK) |            \
-                                     PIN_ODR_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_AFRL              (PIN_AFIO_AF(GPIOA_PIN0, 0) |         \
-                                     PIN_AFIO_AF(GPIOA_PIN1, 1) |           \
-                                     PIN_AFIO_AF(GPIOA_PIN2, 0) |           \
-                                     PIN_AFIO_AF(GPIOA_PIN3, 0) |           \
-                                     PIN_AFIO_AF(GPIOA_PIN4, 0) |           \
-                                     PIN_AFIO_AF(GPIOA_PIN5, 5) |       \
-                                     PIN_AFIO_AF(GPIOA_PIN6, 5) |      \
-                                     PIN_AFIO_AF(GPIOA_PIN7, 5))
-#define VAL_GPIOA_AFRH              (PIN_AFIO_AF(GPIOA_PIN8, 0) |           \
-                                     PIN_AFIO_AF(GPIOA_PIN9, 0) |           \
-                                     PIN_AFIO_AF(GPIOA_PIN10, 0) |          \
-                                     PIN_AFIO_AF(GPIOA_USB_DM, 14) |        \
-                                     PIN_AFIO_AF(GPIOA_USB_DP, 14) |        \
-                                     PIN_AFIO_AF(GPIOA_SWDIO, 0) |          \
-                                     PIN_AFIO_AF(GPIOA_SWCLK, 0) |          \
-                                     PIN_AFIO_AF(GPIOA_PIN15, 0))
+#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_PIN0) | PIN_MODE_ALTERNATE(GPIOA_PIN1) | PIN_MODE_INPUT(GPIOA_PIN2) | PIN_MODE_INPUT(GPIOA_PIN3) | PIN_MODE_INPUT(GPIOA_PIN4) | PIN_MODE_INPUT(GPIOA_PIN5) | PIN_MODE_INPUT(GPIOA_PIN6) | PIN_MODE_INPUT(GPIOA_PIN7) | PIN_MODE_INPUT(GPIOA_PIN8) | PIN_MODE_INPUT(GPIOA_PIN9) | PIN_MODE_INPUT(GPIOA_PIN10) | PIN_MODE_ALTERNATE(GPIOA_USB_DM) | PIN_MODE_ALTERNATE(GPIOA_USB_DP) | PIN_MODE_ALTERNATE(GPIOA_SWDIO) | PIN_MODE_ALTERNATE(GPIOA_SWCLK) | PIN_MODE_INPUT(GPIOA_PIN15))
+#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_PIN0) | PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
+#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_PIN0) | PIN_OSPEED_HIGH(GPIOA_PIN1) | PIN_OSPEED_VERYLOW(GPIOA_PIN2) | PIN_OSPEED_VERYLOW(GPIOA_PIN3) | PIN_OSPEED_VERYLOW(GPIOA_PIN4) | PIN_OSPEED_VERYLOW(GPIOA_PIN5) | PIN_OSPEED_VERYLOW(GPIOA_PIN6) | PIN_OSPEED_VERYLOW(GPIOA_PIN7) | PIN_OSPEED_VERYLOW(GPIOA_PIN8) | PIN_OSPEED_VERYLOW(GPIOA_PIN9) | PIN_OSPEED_VERYLOW(GPIOA_PIN10) | PIN_OSPEED_HIGH(GPIOA_USB_DM) | PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | PIN_OSPEED_HIGH(GPIOA_SWDIO) | PIN_OSPEED_HIGH(GPIOA_SWCLK) | PIN_OSPEED_VERYLOW(GPIOA_PIN15))
+#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_PIN0) | PIN_PUPDR_FLOATING(GPIOA_PIN1) | PIN_PUPDR_PULLUP(GPIOA_PIN2) | PIN_PUPDR_PULLUP(GPIOA_PIN3) | PIN_PUPDR_PULLUP(GPIOA_PIN4) | PIN_PUPDR_PULLUP(GPIOA_PIN5) | PIN_PUPDR_PULLUP(GPIOA_PIN6) | PIN_PUPDR_FLOATING(GPIOA_PIN7) | PIN_PUPDR_PULLUP(GPIOA_PIN8) | PIN_PUPDR_PULLUP(GPIOA_PIN9) | PIN_PUPDR_PULLUP(GPIOA_PIN10) | PIN_PUPDR_FLOATING(GPIOA_USB_DM) | PIN_PUPDR_FLOATING(GPIOA_USB_DP) | PIN_PUPDR_PULLUP(GPIOA_SWDIO) | PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | PIN_PUPDR_PULLUP(GPIOA_PIN15))
+#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_PIN0) | PIN_ODR_HIGH(GPIOA_PIN1) | PIN_ODR_HIGH(GPIOA_PIN2) | PIN_ODR_HIGH(GPIOA_PIN3) | PIN_ODR_HIGH(GPIOA_PIN4) | PIN_ODR_HIGH(GPIOA_PIN5) | PIN_ODR_HIGH(GPIOA_PIN6) | PIN_ODR_HIGH(GPIOA_PIN7) | PIN_ODR_HIGH(GPIOA_PIN8) | PIN_ODR_HIGH(GPIOA_PIN9) | PIN_ODR_HIGH(GPIOA_PIN10) | PIN_ODR_HIGH(GPIOA_USB_DM) | PIN_ODR_HIGH(GPIOA_USB_DP) | PIN_ODR_HIGH(GPIOA_SWDIO) | PIN_ODR_HIGH(GPIOA_SWCLK) | PIN_ODR_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_PIN0, 0) | PIN_AFIO_AF(GPIOA_PIN1, 1) | PIN_AFIO_AF(GPIOA_PIN2, 0) | PIN_AFIO_AF(GPIOA_PIN3, 0) | PIN_AFIO_AF(GPIOA_PIN4, 0) | PIN_AFIO_AF(GPIOA_PIN5, 5) | PIN_AFIO_AF(GPIOA_PIN6, 5) | PIN_AFIO_AF(GPIOA_PIN7, 5))
+#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0) | PIN_AFIO_AF(GPIOA_PIN9, 0) | PIN_AFIO_AF(GPIOA_PIN10, 0) | PIN_AFIO_AF(GPIOA_USB_DM, 14) | PIN_AFIO_AF(GPIOA_USB_DP, 14) | PIN_AFIO_AF(GPIOA_SWDIO, 0) | PIN_AFIO_AF(GPIOA_SWCLK, 0) | PIN_AFIO_AF(GPIOA_PIN15, 0))
 
 /*
  * GPIOB setup:
@@ -361,102 +271,13 @@
  * PB14 - PIN14                     (input pullup).
  * PB15 - PIN15                     (input pullup).
  */
-#define VAL_GPIOB_MODER             (PIN_MODE_INPUT(GPIOB_PIN0) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN2) |           \
-                                     PIN_MODE_ALTERNATE(GPIOB_PIN3) |        \
-                                     PIN_MODE_INPUT(GPIOB_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN5) |           \
-                                     PIN_MODE_ALTERNATE(GPIOB_PIN6) |   \
-                                     PIN_MODE_OUTPUT(GPIOB_PIN7) |   \
-                                     PIN_MODE_INPUT(GPIOB_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOB_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOB_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOB_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOB_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOB_PIN14) |          \
-                                     PIN_MODE_INPUT(GPIOB_PIN15))
-#define VAL_GPIOB_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN3) |        \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN5) |       \
-                                     PIN_OTYPE_OPENDRAIN(GPIOB_PIN6) |  \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN7) |  \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN14) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOB_PIN15))
-#define VAL_GPIOB_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOB_PIN0) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN2) |       \
-                                     PIN_OSPEED_HIGH(GPIOB_PIN3) |           \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN5) |       \
-                                     PIN_OSPEED_HIGH(GPIOB_PIN6) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN7) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN13) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN14) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOB_PIN15))
-#define VAL_GPIOB_PUPDR             (PIN_PUPDR_PULLUP(GPIOB_PIN0) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN2) |         \
-                                     PIN_PUPDR_FLOATING(GPIOB_PIN3) |        \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN5) |         \
-                                     PIN_PUPDR_FLOATING(GPIOB_PIN6) |   \
-                                     PIN_PUPDR_PULLDOWN(GPIOB_PIN7) |   \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN13) |        \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN14) |        \
-                                     PIN_PUPDR_PULLUP(GPIOB_PIN15))
-#define VAL_GPIOB_ODR               (PIN_ODR_HIGH(GPIOB_PIN0) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN3) |              \
-                                     PIN_ODR_HIGH(GPIOB_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN6) |         \
-                                     PIN_ODR_LOW(GPIOB_PIN7) |         \
-                                     PIN_ODR_HIGH(GPIOB_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOB_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOB_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOB_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOB_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOB_PIN14) |            \
-                                     PIN_ODR_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_AFRL              (PIN_AFIO_AF(GPIOB_PIN0, 0) |           \
-                                     PIN_AFIO_AF(GPIOB_PIN1, 0) |           \
-                                     PIN_AFIO_AF(GPIOB_PIN2, 0) |           \
-                                     PIN_AFIO_AF(GPIOB_PIN3, 0) |            \
-                                     PIN_AFIO_AF(GPIOB_PIN4, 0) |           \
-                                     PIN_AFIO_AF(GPIOB_PIN5, 0) |           \
-                                     PIN_AFIO_AF(GPIOB_PIN6, 4) |       \
-                                     PIN_AFIO_AF(GPIOB_PIN7, 0))
-#define VAL_GPIOB_AFRH              (PIN_AFIO_AF(GPIOB_PIN8, 0) |           \
-                                     PIN_AFIO_AF(GPIOB_PIN9, 0) |           \
-                                     PIN_AFIO_AF(GPIOB_PIN10, 0) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN11, 0) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN12, 0) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN13, 0) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN14, 0) |          \
-                                     PIN_AFIO_AF(GPIOB_PIN15, 0))
+#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | PIN_MODE_INPUT(GPIOB_PIN1) | PIN_MODE_INPUT(GPIOB_PIN2) | PIN_MODE_ALTERNATE(GPIOB_PIN3) | PIN_MODE_INPUT(GPIOB_PIN4) | PIN_MODE_INPUT(GPIOB_PIN5) | PIN_MODE_ALTERNATE(GPIOB_PIN6) | PIN_MODE_OUTPUT(GPIOB_PIN7) | PIN_MODE_INPUT(GPIOB_PIN8) | PIN_MODE_INPUT(GPIOB_PIN9) | PIN_MODE_INPUT(GPIOB_PIN10) | PIN_MODE_INPUT(GPIOB_PIN11) | PIN_MODE_INPUT(GPIOB_PIN12) | PIN_MODE_INPUT(GPIOB_PIN13) | PIN_MODE_INPUT(GPIOB_PIN14) | PIN_MODE_INPUT(GPIOB_PIN15))
+#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | PIN_OTYPE_OPENDRAIN(GPIOB_PIN6) | PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | PIN_OTYPE_PUSHPULL(GPIOB_PIN15))
+#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | PIN_OSPEED_VERYLOW(GPIOB_PIN1) | PIN_OSPEED_VERYLOW(GPIOB_PIN2) | PIN_OSPEED_HIGH(GPIOB_PIN3) | PIN_OSPEED_VERYLOW(GPIOB_PIN4) | PIN_OSPEED_VERYLOW(GPIOB_PIN5) | PIN_OSPEED_HIGH(GPIOB_PIN6) | PIN_OSPEED_VERYLOW(GPIOB_PIN7) | PIN_OSPEED_VERYLOW(GPIOB_PIN8) | PIN_OSPEED_VERYLOW(GPIOB_PIN9) | PIN_OSPEED_VERYLOW(GPIOB_PIN10) | PIN_OSPEED_VERYLOW(GPIOB_PIN11) | PIN_OSPEED_VERYLOW(GPIOB_PIN12) | PIN_OSPEED_VERYLOW(GPIOB_PIN13) | PIN_OSPEED_VERYLOW(GPIOB_PIN14) | PIN_OSPEED_VERYLOW(GPIOB_PIN15))
+#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | PIN_PUPDR_PULLUP(GPIOB_PIN1) | PIN_PUPDR_PULLUP(GPIOB_PIN2) | PIN_PUPDR_FLOATING(GPIOB_PIN3) | PIN_PUPDR_PULLUP(GPIOB_PIN4) | PIN_PUPDR_PULLUP(GPIOB_PIN5) | PIN_PUPDR_FLOATING(GPIOB_PIN6) | PIN_PUPDR_PULLDOWN(GPIOB_PIN7) | PIN_PUPDR_PULLUP(GPIOB_PIN8) | PIN_PUPDR_PULLUP(GPIOB_PIN9) | PIN_PUPDR_PULLUP(GPIOB_PIN10) | PIN_PUPDR_PULLUP(GPIOB_PIN11) | PIN_PUPDR_PULLUP(GPIOB_PIN12) | PIN_PUPDR_PULLUP(GPIOB_PIN13) | PIN_PUPDR_PULLUP(GPIOB_PIN14) | PIN_PUPDR_PULLUP(GPIOB_PIN15))
+#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | PIN_ODR_HIGH(GPIOB_PIN1) | PIN_ODR_HIGH(GPIOB_PIN2) | PIN_ODR_HIGH(GPIOB_PIN3) | PIN_ODR_HIGH(GPIOB_PIN4) | PIN_ODR_HIGH(GPIOB_PIN5) | PIN_ODR_HIGH(GPIOB_PIN6) | PIN_ODR_LOW(GPIOB_PIN7) | PIN_ODR_HIGH(GPIOB_PIN8) | PIN_ODR_HIGH(GPIOB_PIN9) | PIN_ODR_HIGH(GPIOB_PIN10) | PIN_ODR_HIGH(GPIOB_PIN11) | PIN_ODR_HIGH(GPIOB_PIN12) | PIN_ODR_HIGH(GPIOB_PIN13) | PIN_ODR_HIGH(GPIOB_PIN14) | PIN_ODR_HIGH(GPIOB_PIN15))
+#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0) | PIN_AFIO_AF(GPIOB_PIN1, 0) | PIN_AFIO_AF(GPIOB_PIN2, 0) | PIN_AFIO_AF(GPIOB_PIN3, 0) | PIN_AFIO_AF(GPIOB_PIN4, 0) | PIN_AFIO_AF(GPIOB_PIN5, 0) | PIN_AFIO_AF(GPIOB_PIN6, 4) | PIN_AFIO_AF(GPIOB_PIN7, 0))
+#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0) | PIN_AFIO_AF(GPIOB_PIN9, 0) | PIN_AFIO_AF(GPIOB_PIN10, 0) | PIN_AFIO_AF(GPIOB_PIN11, 0) | PIN_AFIO_AF(GPIOB_PIN12, 0) | PIN_AFIO_AF(GPIOB_PIN13, 0) | PIN_AFIO_AF(GPIOB_PIN14, 0) | PIN_AFIO_AF(GPIOB_PIN15, 0))
 
 /*
  * GPIOC setup:
@@ -478,102 +299,13 @@
  * PC14 - PIN14                  (input floating).
  * PC15 - PIN15                 (input floating).
  */
-#define VAL_GPIOC_MODER             (PIN_MODE_INPUT(GPIOC_PIN0) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOC_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOC_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOC_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOC_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOC_PIN14) |       \
-                                     PIN_MODE_INPUT(GPIOC_PIN15))
-#define VAL_GPIOC_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN14) |   \
-                                     PIN_OTYPE_PUSHPULL(GPIOC_PIN15))
-#define VAL_GPIOC_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOC_PIN0) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOC_PIN13) |      \
-                                     PIN_OSPEED_HIGH(GPIOC_PIN14) |      \
-                                     PIN_OSPEED_HIGH(GPIOC_PIN15))
-#define VAL_GPIOC_PUPDR             (PIN_PUPDR_PULLUP(GPIOC_PIN0) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOC_PIN13) |        \
-                                     PIN_PUPDR_FLOATING(GPIOC_PIN14) |   \
-                                     PIN_PUPDR_FLOATING(GPIOC_PIN15))
-#define VAL_GPIOC_ODR               (PIN_ODR_HIGH(GPIOC_PIN0) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOC_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOC_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOC_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOC_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOC_PIN14) |         \
-                                     PIN_ODR_HIGH(GPIOC_PIN15))
-#define VAL_GPIOC_AFRL              (PIN_AFIO_AF(GPIOC_PIN0, 0) |           \
-                                     PIN_AFIO_AF(GPIOC_PIN1, 0) |           \
-                                     PIN_AFIO_AF(GPIOC_PIN2, 0) |           \
-                                     PIN_AFIO_AF(GPIOC_PIN3, 0) |           \
-                                     PIN_AFIO_AF(GPIOC_PIN4, 0) |           \
-                                     PIN_AFIO_AF(GPIOC_PIN5, 0) |           \
-                                     PIN_AFIO_AF(GPIOC_PIN6, 0) |           \
-                                     PIN_AFIO_AF(GPIOC_PIN7, 0))
-#define VAL_GPIOC_AFRH              (PIN_AFIO_AF(GPIOC_PIN8, 0) |           \
-                                     PIN_AFIO_AF(GPIOC_PIN9, 0) |           \
-                                     PIN_AFIO_AF(GPIOC_PIN10, 0) |          \
-                                     PIN_AFIO_AF(GPIOC_PIN11, 0) |          \
-                                     PIN_AFIO_AF(GPIOC_PIN12, 0) |          \
-                                     PIN_AFIO_AF(GPIOC_PIN13, 0) |          \
-                                     PIN_AFIO_AF(GPIOC_PIN14, 0) |       \
-                                     PIN_AFIO_AF(GPIOC_PIN15, 0))
+#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_PIN0) | PIN_MODE_INPUT(GPIOC_PIN1) | PIN_MODE_INPUT(GPIOC_PIN2) | PIN_MODE_INPUT(GPIOC_PIN3) | PIN_MODE_INPUT(GPIOC_PIN4) | PIN_MODE_INPUT(GPIOC_PIN5) | PIN_MODE_INPUT(GPIOC_PIN6) | PIN_MODE_INPUT(GPIOC_PIN7) | PIN_MODE_INPUT(GPIOC_PIN8) | PIN_MODE_INPUT(GPIOC_PIN9) | PIN_MODE_INPUT(GPIOC_PIN10) | PIN_MODE_INPUT(GPIOC_PIN11) | PIN_MODE_INPUT(GPIOC_PIN12) | PIN_MODE_INPUT(GPIOC_PIN13) | PIN_MODE_INPUT(GPIOC_PIN14) | PIN_MODE_INPUT(GPIOC_PIN15))
+#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) | PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | PIN_OTYPE_PUSHPULL(GPIOC_PIN14) | PIN_OTYPE_PUSHPULL(GPIOC_PIN15))
+#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOC_PIN0) | PIN_OSPEED_VERYLOW(GPIOC_PIN1) | PIN_OSPEED_VERYLOW(GPIOC_PIN2) | PIN_OSPEED_VERYLOW(GPIOC_PIN3) | PIN_OSPEED_VERYLOW(GPIOC_PIN4) | PIN_OSPEED_VERYLOW(GPIOC_PIN5) | PIN_OSPEED_VERYLOW(GPIOC_PIN6) | PIN_OSPEED_VERYLOW(GPIOC_PIN7) | PIN_OSPEED_VERYLOW(GPIOC_PIN8) | PIN_OSPEED_VERYLOW(GPIOC_PIN9) | PIN_OSPEED_VERYLOW(GPIOC_PIN10) | PIN_OSPEED_VERYLOW(GPIOC_PIN11) | PIN_OSPEED_VERYLOW(GPIOC_PIN12) | PIN_OSPEED_VERYLOW(GPIOC_PIN13) | PIN_OSPEED_HIGH(GPIOC_PIN14) | PIN_OSPEED_HIGH(GPIOC_PIN15))
+#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_PIN0) | PIN_PUPDR_PULLUP(GPIOC_PIN1) | PIN_PUPDR_PULLUP(GPIOC_PIN2) | PIN_PUPDR_PULLUP(GPIOC_PIN3) | PIN_PUPDR_PULLUP(GPIOC_PIN4) | PIN_PUPDR_PULLUP(GPIOC_PIN5) | PIN_PUPDR_PULLUP(GPIOC_PIN6) | PIN_PUPDR_PULLUP(GPIOC_PIN7) | PIN_PUPDR_PULLUP(GPIOC_PIN8) | PIN_PUPDR_PULLUP(GPIOC_PIN9) | PIN_PUPDR_PULLUP(GPIOC_PIN10) | PIN_PUPDR_PULLUP(GPIOC_PIN11) | PIN_PUPDR_PULLUP(GPIOC_PIN12) | PIN_PUPDR_PULLUP(GPIOC_PIN13) | PIN_PUPDR_FLOATING(GPIOC_PIN14) | PIN_PUPDR_FLOATING(GPIOC_PIN15))
+#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_PIN0) | PIN_ODR_HIGH(GPIOC_PIN1) | PIN_ODR_HIGH(GPIOC_PIN2) | PIN_ODR_HIGH(GPIOC_PIN3) | PIN_ODR_HIGH(GPIOC_PIN4) | PIN_ODR_HIGH(GPIOC_PIN5) | PIN_ODR_HIGH(GPIOC_PIN6) | PIN_ODR_HIGH(GPIOC_PIN7) | PIN_ODR_HIGH(GPIOC_PIN8) | PIN_ODR_HIGH(GPIOC_PIN9) | PIN_ODR_HIGH(GPIOC_PIN10) | PIN_ODR_HIGH(GPIOC_PIN11) | PIN_ODR_HIGH(GPIOC_PIN12) | PIN_ODR_HIGH(GPIOC_PIN13) | PIN_ODR_HIGH(GPIOC_PIN14) | PIN_ODR_HIGH(GPIOC_PIN15))
+#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_PIN0, 0) | PIN_AFIO_AF(GPIOC_PIN1, 0) | PIN_AFIO_AF(GPIOC_PIN2, 0) | PIN_AFIO_AF(GPIOC_PIN3, 0) | PIN_AFIO_AF(GPIOC_PIN4, 0) | PIN_AFIO_AF(GPIOC_PIN5, 0) | PIN_AFIO_AF(GPIOC_PIN6, 0) | PIN_AFIO_AF(GPIOC_PIN7, 0))
+#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0) | PIN_AFIO_AF(GPIOC_PIN9, 0) | PIN_AFIO_AF(GPIOC_PIN10, 0) | PIN_AFIO_AF(GPIOC_PIN11, 0) | PIN_AFIO_AF(GPIOC_PIN12, 0) | PIN_AFIO_AF(GPIOC_PIN13, 0) | PIN_AFIO_AF(GPIOC_PIN14, 0) | PIN_AFIO_AF(GPIOC_PIN15, 0))
 
 /*
  * GPIOD setup:
@@ -595,102 +327,13 @@
  * PD14 - PIN14                     (input pullup).
  * PD15 - PIN15                     (input pullup).
  */
-#define VAL_GPIOD_MODER             (PIN_MODE_INPUT(GPIOD_PIN0) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOD_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN14) |          \
-                                     PIN_MODE_INPUT(GPIOD_PIN15))
-#define VAL_GPIOD_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN14) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
-#define VAL_GPIOD_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOD_PIN0) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN13) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN14) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOD_PIN15))
-#define VAL_GPIOD_PUPDR             (PIN_PUPDR_PULLUP(GPIOD_PIN0) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN13) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN14) |        \
-                                     PIN_PUPDR_PULLUP(GPIOD_PIN15))
-#define VAL_GPIOD_ODR               (PIN_ODR_HIGH(GPIOD_PIN0) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOD_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN14) |            \
-                                     PIN_ODR_HIGH(GPIOD_PIN15))
-#define VAL_GPIOD_AFRL              (PIN_AFIO_AF(GPIOD_PIN0, 0) |           \
-                                     PIN_AFIO_AF(GPIOD_PIN1, 0) |           \
-                                     PIN_AFIO_AF(GPIOD_PIN2, 0) |           \
-                                     PIN_AFIO_AF(GPIOD_PIN3, 0) |           \
-                                     PIN_AFIO_AF(GPIOD_PIN4, 0) |           \
-                                     PIN_AFIO_AF(GPIOD_PIN5, 0) |           \
-                                     PIN_AFIO_AF(GPIOD_PIN6, 0) |           \
-                                     PIN_AFIO_AF(GPIOD_PIN7, 0))
-#define VAL_GPIOD_AFRH              (PIN_AFIO_AF(GPIOD_PIN8, 0) |           \
-                                     PIN_AFIO_AF(GPIOD_PIN9, 0) |           \
-                                     PIN_AFIO_AF(GPIOD_PIN10, 0) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN11, 0) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN12, 0) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN13, 0) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN14, 0) |          \
-                                     PIN_AFIO_AF(GPIOD_PIN15, 0))
+#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | PIN_MODE_INPUT(GPIOD_PIN1) | PIN_MODE_INPUT(GPIOD_PIN2) | PIN_MODE_INPUT(GPIOD_PIN3) | PIN_MODE_INPUT(GPIOD_PIN4) | PIN_MODE_INPUT(GPIOD_PIN5) | PIN_MODE_INPUT(GPIOD_PIN6) | PIN_MODE_INPUT(GPIOD_PIN7) | PIN_MODE_INPUT(GPIOD_PIN8) | PIN_MODE_INPUT(GPIOD_PIN9) | PIN_MODE_INPUT(GPIOD_PIN10) | PIN_MODE_INPUT(GPIOD_PIN11) | PIN_MODE_INPUT(GPIOD_PIN12) | PIN_MODE_INPUT(GPIOD_PIN13) | PIN_MODE_INPUT(GPIOD_PIN14) | PIN_MODE_INPUT(GPIOD_PIN15))
+#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
+#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | PIN_OSPEED_VERYLOW(GPIOD_PIN1) | PIN_OSPEED_VERYLOW(GPIOD_PIN2) | PIN_OSPEED_VERYLOW(GPIOD_PIN3) | PIN_OSPEED_VERYLOW(GPIOD_PIN4) | PIN_OSPEED_VERYLOW(GPIOD_PIN5) | PIN_OSPEED_VERYLOW(GPIOD_PIN6) | PIN_OSPEED_VERYLOW(GPIOD_PIN7) | PIN_OSPEED_VERYLOW(GPIOD_PIN8) | PIN_OSPEED_VERYLOW(GPIOD_PIN9) | PIN_OSPEED_VERYLOW(GPIOD_PIN10) | PIN_OSPEED_VERYLOW(GPIOD_PIN11) | PIN_OSPEED_VERYLOW(GPIOD_PIN12) | PIN_OSPEED_VERYLOW(GPIOD_PIN13) | PIN_OSPEED_VERYLOW(GPIOD_PIN14) | PIN_OSPEED_VERYLOW(GPIOD_PIN15))
+#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | PIN_PUPDR_PULLUP(GPIOD_PIN1) | PIN_PUPDR_PULLUP(GPIOD_PIN2) | PIN_PUPDR_PULLUP(GPIOD_PIN3) | PIN_PUPDR_PULLUP(GPIOD_PIN4) | PIN_PUPDR_PULLUP(GPIOD_PIN5) | PIN_PUPDR_PULLUP(GPIOD_PIN6) | PIN_PUPDR_PULLUP(GPIOD_PIN7) | PIN_PUPDR_PULLUP(GPIOD_PIN8) | PIN_PUPDR_PULLUP(GPIOD_PIN9) | PIN_PUPDR_PULLUP(GPIOD_PIN10) | PIN_PUPDR_PULLUP(GPIOD_PIN11) | PIN_PUPDR_PULLUP(GPIOD_PIN12) | PIN_PUPDR_PULLUP(GPIOD_PIN13) | PIN_PUPDR_PULLUP(GPIOD_PIN14) | PIN_PUPDR_PULLUP(GPIOD_PIN15))
+#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | PIN_ODR_HIGH(GPIOD_PIN1) | PIN_ODR_HIGH(GPIOD_PIN2) | PIN_ODR_HIGH(GPIOD_PIN3) | PIN_ODR_HIGH(GPIOD_PIN4) | PIN_ODR_HIGH(GPIOD_PIN5) | PIN_ODR_HIGH(GPIOD_PIN6) | PIN_ODR_HIGH(GPIOD_PIN7) | PIN_ODR_HIGH(GPIOD_PIN8) | PIN_ODR_HIGH(GPIOD_PIN9) | PIN_ODR_HIGH(GPIOD_PIN10) | PIN_ODR_HIGH(GPIOD_PIN11) | PIN_ODR_HIGH(GPIOD_PIN12) | PIN_ODR_HIGH(GPIOD_PIN13) | PIN_ODR_HIGH(GPIOD_PIN14) | PIN_ODR_HIGH(GPIOD_PIN15))
+#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0) | PIN_AFIO_AF(GPIOD_PIN1, 0) | PIN_AFIO_AF(GPIOD_PIN2, 0) | PIN_AFIO_AF(GPIOD_PIN3, 0) | PIN_AFIO_AF(GPIOD_PIN4, 0) | PIN_AFIO_AF(GPIOD_PIN5, 0) | PIN_AFIO_AF(GPIOD_PIN6, 0) | PIN_AFIO_AF(GPIOD_PIN7, 0))
+#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0) | PIN_AFIO_AF(GPIOD_PIN9, 0) | PIN_AFIO_AF(GPIOD_PIN10, 0) | PIN_AFIO_AF(GPIOD_PIN11, 0) | PIN_AFIO_AF(GPIOD_PIN12, 0) | PIN_AFIO_AF(GPIOD_PIN13, 0) | PIN_AFIO_AF(GPIOD_PIN14, 0) | PIN_AFIO_AF(GPIOD_PIN15, 0))
 
 /*
  * GPIOE setup:
@@ -712,102 +355,13 @@
  * PE14 - PIN14               (output pushpull maximum).
  * PE15 - PIN15                (output pushpull maximum).
  */
-#define VAL_GPIOE_MODER             (PIN_MODE_INPUT(GPIOE_PIN0) |    \
-                                     PIN_MODE_INPUT(GPIOE_PIN1) |    \
-                                     PIN_MODE_INPUT(GPIOE_PIN2) |\
-                                     PIN_MODE_OUTPUT(GPIOE_PIN3) |       \
-                                     PIN_MODE_INPUT(GPIOE_PIN4) |\
-                                     PIN_MODE_INPUT(GPIOE_PIN5) |\
-                                     PIN_MODE_INPUT(GPIOE_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOE_PIN7) |           \
-                                     PIN_MODE_OUTPUT(GPIOE_PIN8) |     \
-                                     PIN_MODE_OUTPUT(GPIOE_PIN9) |      \
-                                     PIN_MODE_OUTPUT(GPIOE_PIN10) |   \
-                                     PIN_MODE_OUTPUT(GPIOE_PIN11) |    \
-                                     PIN_MODE_OUTPUT(GPIOE_PIN12) |     \
-                                     PIN_MODE_OUTPUT(GPIOE_PIN13) |     \
-                                     PIN_MODE_OUTPUT(GPIOE_PIN14) |   \
-                                     PIN_MODE_OUTPUT(GPIOE_PIN15))
-#define VAL_GPIOE_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |\
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |\
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |\
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN3) |    \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |\
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |\
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN8) |  \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN9) |   \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |\
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN12) |  \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN13) |  \
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |\
-                                     PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
-#define VAL_GPIOE_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOE_PIN0) |\
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN1) |\
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN2) |\
-                                     PIN_OSPEED_HIGH(GPIOE_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN4) |\
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN5) |\
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOE_PIN7) |       \
-                                     PIN_OSPEED_HIGH(GPIOE_PIN8) |     \
-                                     PIN_OSPEED_HIGH(GPIOE_PIN9) |      \
-                                     PIN_OSPEED_HIGH(GPIOE_PIN10) |   \
-                                     PIN_OSPEED_HIGH(GPIOE_PIN11) |    \
-                                     PIN_OSPEED_HIGH(GPIOE_PIN12) |     \
-                                     PIN_OSPEED_HIGH(GPIOE_PIN13) |     \
-                                     PIN_OSPEED_HIGH(GPIOE_PIN14) |   \
-                                     PIN_OSPEED_HIGH(GPIOE_PIN15))
-#define VAL_GPIOE_PUPDR             (PIN_PUPDR_PULLUP(GPIOE_PIN0) |  \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN1) |  \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN2) |\
-                                     PIN_PUPDR_FLOATING(GPIOE_PIN3) |    \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN4) |\
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN5) |\
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN8) |    \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN9) |     \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN10) |  \
-                                     PIN_PUPDR_FLOATING(GPIOE_PIN11) | \
-                                     PIN_PUPDR_PULLUP(GPIOE_PIN12) |    \
-                                     PIN_PUPDR_FLOATING(GPIOE_PIN13) |  \
-                                     PIN_PUPDR_FLOATING(GPIOE_PIN14) |\
-                                     PIN_PUPDR_FLOATING(GPIOE_PIN15))
-#define VAL_GPIOE_ODR               (PIN_ODR_HIGH(GPIOE_PIN0) |      \
-                                     PIN_ODR_HIGH(GPIOE_PIN1) |      \
-                                     PIN_ODR_HIGH(GPIOE_PIN2) |  \
-                                     PIN_ODR_HIGH(GPIOE_PIN3) |          \
-                                     PIN_ODR_HIGH(GPIOE_PIN4) |  \
-                                     PIN_ODR_HIGH(GPIOE_PIN5) |  \
-                                     PIN_ODR_HIGH(GPIOE_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOE_PIN7) |             \
-                                     PIN_ODR_LOW(GPIOE_PIN8) |         \
-                                     PIN_ODR_LOW(GPIOE_PIN9) |          \
-                                     PIN_ODR_LOW(GPIOE_PIN10) |       \
-                                     PIN_ODR_LOW(GPIOE_PIN11) |        \
-                                     PIN_ODR_LOW(GPIOE_PIN12) |         \
-                                     PIN_ODR_LOW(GPIOE_PIN13) |         \
-                                     PIN_ODR_LOW(GPIOE_PIN14) |       \
-                                     PIN_ODR_LOW(GPIOE_PIN15))
-#define VAL_GPIOE_AFRL              (PIN_AFIO_AF(GPIOE_PIN0, 0) |    \
-                                     PIN_AFIO_AF(GPIOE_PIN1, 0) |    \
-                                     PIN_AFIO_AF(GPIOE_PIN2, 0) |\
-                                     PIN_AFIO_AF(GPIOE_PIN3, 0) |        \
-                                     PIN_AFIO_AF(GPIOE_PIN4, 0) |\
-                                     PIN_AFIO_AF(GPIOE_PIN5, 0) |\
-                                     PIN_AFIO_AF(GPIOE_PIN6, 0) |           \
-                                     PIN_AFIO_AF(GPIOE_PIN7, 0))
-#define VAL_GPIOE_AFRH              (PIN_AFIO_AF(GPIOE_PIN8, 0) |      \
-                                     PIN_AFIO_AF(GPIOE_PIN9, 0) |       \
-                                     PIN_AFIO_AF(GPIOE_PIN10, 0) |    \
-                                     PIN_AFIO_AF(GPIOE_PIN11, 0) |     \
-                                     PIN_AFIO_AF(GPIOE_PIN12, 0) |      \
-                                     PIN_AFIO_AF(GPIOE_PIN13, 0) |      \
-                                     PIN_AFIO_AF(GPIOE_PIN14, 0) |    \
-                                     PIN_AFIO_AF(GPIOE_PIN15, 0))
+#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | PIN_MODE_INPUT(GPIOE_PIN1) | PIN_MODE_INPUT(GPIOE_PIN2) | PIN_MODE_OUTPUT(GPIOE_PIN3) | PIN_MODE_INPUT(GPIOE_PIN4) | PIN_MODE_INPUT(GPIOE_PIN5) | PIN_MODE_INPUT(GPIOE_PIN6) | PIN_MODE_INPUT(GPIOE_PIN7) | PIN_MODE_OUTPUT(GPIOE_PIN8) | PIN_MODE_OUTPUT(GPIOE_PIN9) | PIN_MODE_OUTPUT(GPIOE_PIN10) | PIN_MODE_OUTPUT(GPIOE_PIN11) | PIN_MODE_OUTPUT(GPIOE_PIN12) | PIN_MODE_OUTPUT(GPIOE_PIN13) | PIN_MODE_OUTPUT(GPIOE_PIN14) | PIN_MODE_OUTPUT(GPIOE_PIN15))
+#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
+#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | PIN_OSPEED_VERYLOW(GPIOE_PIN1) | PIN_OSPEED_VERYLOW(GPIOE_PIN2) | PIN_OSPEED_HIGH(GPIOE_PIN3) | PIN_OSPEED_VERYLOW(GPIOE_PIN4) | PIN_OSPEED_VERYLOW(GPIOE_PIN5) | PIN_OSPEED_VERYLOW(GPIOE_PIN6) | PIN_OSPEED_VERYLOW(GPIOE_PIN7) | PIN_OSPEED_HIGH(GPIOE_PIN8) | PIN_OSPEED_HIGH(GPIOE_PIN9) | PIN_OSPEED_HIGH(GPIOE_PIN10) | PIN_OSPEED_HIGH(GPIOE_PIN11) | PIN_OSPEED_HIGH(GPIOE_PIN12) | PIN_OSPEED_HIGH(GPIOE_PIN13) | PIN_OSPEED_HIGH(GPIOE_PIN14) | PIN_OSPEED_HIGH(GPIOE_PIN15))
+#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | PIN_PUPDR_PULLUP(GPIOE_PIN1) | PIN_PUPDR_PULLUP(GPIOE_PIN2) | PIN_PUPDR_FLOATING(GPIOE_PIN3) | PIN_PUPDR_PULLUP(GPIOE_PIN4) | PIN_PUPDR_PULLUP(GPIOE_PIN5) | PIN_PUPDR_PULLUP(GPIOE_PIN6) | PIN_PUPDR_PULLUP(GPIOE_PIN7) | PIN_PUPDR_PULLUP(GPIOE_PIN8) | PIN_PUPDR_PULLUP(GPIOE_PIN9) | PIN_PUPDR_PULLUP(GPIOE_PIN10) | PIN_PUPDR_FLOATING(GPIOE_PIN11) | PIN_PUPDR_PULLUP(GPIOE_PIN12) | PIN_PUPDR_FLOATING(GPIOE_PIN13) | PIN_PUPDR_FLOATING(GPIOE_PIN14) | PIN_PUPDR_FLOATING(GPIOE_PIN15))
+#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | PIN_ODR_HIGH(GPIOE_PIN1) | PIN_ODR_HIGH(GPIOE_PIN2) | PIN_ODR_HIGH(GPIOE_PIN3) | PIN_ODR_HIGH(GPIOE_PIN4) | PIN_ODR_HIGH(GPIOE_PIN5) | PIN_ODR_HIGH(GPIOE_PIN6) | PIN_ODR_HIGH(GPIOE_PIN7) | PIN_ODR_LOW(GPIOE_PIN8) | PIN_ODR_LOW(GPIOE_PIN9) | PIN_ODR_LOW(GPIOE_PIN10) | PIN_ODR_LOW(GPIOE_PIN11) | PIN_ODR_LOW(GPIOE_PIN12) | PIN_ODR_LOW(GPIOE_PIN13) | PIN_ODR_LOW(GPIOE_PIN14) | PIN_ODR_LOW(GPIOE_PIN15))
+#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0) | PIN_AFIO_AF(GPIOE_PIN1, 0) | PIN_AFIO_AF(GPIOE_PIN2, 0) | PIN_AFIO_AF(GPIOE_PIN3, 0) | PIN_AFIO_AF(GPIOE_PIN4, 0) | PIN_AFIO_AF(GPIOE_PIN5, 0) | PIN_AFIO_AF(GPIOE_PIN6, 0) | PIN_AFIO_AF(GPIOE_PIN7, 0))
+#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0) | PIN_AFIO_AF(GPIOE_PIN9, 0) | PIN_AFIO_AF(GPIOE_PIN10, 0) | PIN_AFIO_AF(GPIOE_PIN11, 0) | PIN_AFIO_AF(GPIOE_PIN12, 0) | PIN_AFIO_AF(GPIOE_PIN13, 0) | PIN_AFIO_AF(GPIOE_PIN14, 0) | PIN_AFIO_AF(GPIOE_PIN15, 0))
 
 /*
  * GPIOF setup:
@@ -829,102 +383,13 @@
  * PF14 - PIN14                     (input pullup).
  * PF15 - PIN15                     (input pullup).
  */
-#define VAL_GPIOF_MODER             (PIN_MODE_INPUT(GPIOF_I2C2_SDA) |         \
-                                     PIN_MODE_INPUT(GPIOF_I2C2_SCL) |        \
-                                     PIN_MODE_INPUT(GPIOF_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOF_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN14) |          \
-                                     PIN_MODE_INPUT(GPIOF_PIN15))
-#define VAL_GPIOF_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SDA) |     \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SCL) |    \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN14) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
-#define VAL_GPIOF_OSPEEDR           (PIN_OSPEED_HIGH(GPIOF_I2C2_SDA) |        \
-                                     PIN_OSPEED_HIGH(GPIOF_I2C2_SCL) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN13) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN14) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOF_PIN15))
-#define VAL_GPIOF_PUPDR             (PIN_PUPDR_FLOATING(GPIOF_I2C2_SDA) |     \
-                                     PIN_PUPDR_FLOATING(GPIOF_I2C2_SCL) |    \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN13) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN14) |        \
-                                     PIN_PUPDR_PULLUP(GPIOF_PIN15))
-#define VAL_GPIOF_ODR               (PIN_ODR_HIGH(GPIOF_I2C2_SDA) |           \
-                                     PIN_ODR_HIGH(GPIOF_I2C2_SCL) |          \
-                                     PIN_ODR_HIGH(GPIOF_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOF_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN14) |            \
-                                     PIN_ODR_HIGH(GPIOF_PIN15))
-#define VAL_GPIOF_AFRL              (PIN_AFIO_AF(GPIOF_I2C2_SDA, 0) |         \
-                                     PIN_AFIO_AF(GPIOF_I2C2_SCL, 0) |        \
-                                     PIN_AFIO_AF(GPIOF_PIN2, 0) |           \
-                                     PIN_AFIO_AF(GPIOF_PIN3, 0) |           \
-                                     PIN_AFIO_AF(GPIOF_PIN4, 0) |           \
-                                     PIN_AFIO_AF(GPIOF_PIN5, 0) |           \
-                                     PIN_AFIO_AF(GPIOF_PIN6, 0) |           \
-                                     PIN_AFIO_AF(GPIOF_PIN7, 0))
-#define VAL_GPIOF_AFRH              (PIN_AFIO_AF(GPIOF_PIN8, 0) |           \
-                                     PIN_AFIO_AF(GPIOF_PIN9, 0) |           \
-                                     PIN_AFIO_AF(GPIOF_PIN10, 0) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN11, 0) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN12, 0) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN13, 0) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN14, 0) |          \
-                                     PIN_AFIO_AF(GPIOF_PIN15, 0))
+#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_I2C2_SDA) | PIN_MODE_INPUT(GPIOF_I2C2_SCL) | PIN_MODE_INPUT(GPIOF_PIN2) | PIN_MODE_INPUT(GPIOF_PIN3) | PIN_MODE_INPUT(GPIOF_PIN4) | PIN_MODE_INPUT(GPIOF_PIN5) | PIN_MODE_INPUT(GPIOF_PIN6) | PIN_MODE_INPUT(GPIOF_PIN7) | PIN_MODE_INPUT(GPIOF_PIN8) | PIN_MODE_INPUT(GPIOF_PIN9) | PIN_MODE_INPUT(GPIOF_PIN10) | PIN_MODE_INPUT(GPIOF_PIN11) | PIN_MODE_INPUT(GPIOF_PIN12) | PIN_MODE_INPUT(GPIOF_PIN13) | PIN_MODE_INPUT(GPIOF_PIN14) | PIN_MODE_INPUT(GPIOF_PIN15))
+#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SDA) | PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SCL) | PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
+#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_I2C2_SDA) | PIN_OSPEED_HIGH(GPIOF_I2C2_SCL) | PIN_OSPEED_VERYLOW(GPIOF_PIN2) | PIN_OSPEED_VERYLOW(GPIOF_PIN3) | PIN_OSPEED_VERYLOW(GPIOF_PIN4) | PIN_OSPEED_VERYLOW(GPIOF_PIN5) | PIN_OSPEED_VERYLOW(GPIOF_PIN6) | PIN_OSPEED_VERYLOW(GPIOF_PIN7) | PIN_OSPEED_VERYLOW(GPIOF_PIN8) | PIN_OSPEED_VERYLOW(GPIOF_PIN9) | PIN_OSPEED_VERYLOW(GPIOF_PIN10) | PIN_OSPEED_VERYLOW(GPIOF_PIN11) | PIN_OSPEED_VERYLOW(GPIOF_PIN12) | PIN_OSPEED_VERYLOW(GPIOF_PIN13) | PIN_OSPEED_VERYLOW(GPIOF_PIN14) | PIN_OSPEED_VERYLOW(GPIOF_PIN15))
+#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_I2C2_SDA) | PIN_PUPDR_FLOATING(GPIOF_I2C2_SCL) | PIN_PUPDR_PULLUP(GPIOF_PIN2) | PIN_PUPDR_PULLUP(GPIOF_PIN3) | PIN_PUPDR_PULLUP(GPIOF_PIN4) | PIN_PUPDR_PULLUP(GPIOF_PIN5) | PIN_PUPDR_PULLUP(GPIOF_PIN6) | PIN_PUPDR_PULLUP(GPIOF_PIN7) | PIN_PUPDR_PULLUP(GPIOF_PIN8) | PIN_PUPDR_PULLUP(GPIOF_PIN9) | PIN_PUPDR_PULLUP(GPIOF_PIN10) | PIN_PUPDR_PULLUP(GPIOF_PIN11) | PIN_PUPDR_PULLUP(GPIOF_PIN12) | PIN_PUPDR_PULLUP(GPIOF_PIN13) | PIN_PUPDR_PULLUP(GPIOF_PIN14) | PIN_PUPDR_PULLUP(GPIOF_PIN15))
+#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_I2C2_SDA) | PIN_ODR_HIGH(GPIOF_I2C2_SCL) | PIN_ODR_HIGH(GPIOF_PIN2) | PIN_ODR_HIGH(GPIOF_PIN3) | PIN_ODR_HIGH(GPIOF_PIN4) | PIN_ODR_HIGH(GPIOF_PIN5) | PIN_ODR_HIGH(GPIOF_PIN6) | PIN_ODR_HIGH(GPIOF_PIN7) | PIN_ODR_HIGH(GPIOF_PIN8) | PIN_ODR_HIGH(GPIOF_PIN9) | PIN_ODR_HIGH(GPIOF_PIN10) | PIN_ODR_HIGH(GPIOF_PIN11) | PIN_ODR_HIGH(GPIOF_PIN12) | PIN_ODR_HIGH(GPIOF_PIN13) | PIN_ODR_HIGH(GPIOF_PIN14) | PIN_ODR_HIGH(GPIOF_PIN15))
+#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_I2C2_SDA, 0) | PIN_AFIO_AF(GPIOF_I2C2_SCL, 0) | PIN_AFIO_AF(GPIOF_PIN2, 0) | PIN_AFIO_AF(GPIOF_PIN3, 0) | PIN_AFIO_AF(GPIOF_PIN4, 0) | PIN_AFIO_AF(GPIOF_PIN5, 0) | PIN_AFIO_AF(GPIOF_PIN6, 0) | PIN_AFIO_AF(GPIOF_PIN7, 0))
+#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0) | PIN_AFIO_AF(GPIOF_PIN9, 0) | PIN_AFIO_AF(GPIOF_PIN10, 0) | PIN_AFIO_AF(GPIOF_PIN11, 0) | PIN_AFIO_AF(GPIOF_PIN12, 0) | PIN_AFIO_AF(GPIOF_PIN13, 0) | PIN_AFIO_AF(GPIOF_PIN14, 0) | PIN_AFIO_AF(GPIOF_PIN15, 0))
 
 /*
  * GPIOG setup:
@@ -946,102 +411,13 @@
  * PG14 - PIN14                     (input pullup).
  * PG15 - PIN15                     (input pullup).
  */
-#define VAL_GPIOG_MODER             (PIN_MODE_INPUT(GPIOG_PIN0) |           \
-                                     PIN_MODE_INPUT(GPIOG_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOG_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOG_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOG_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOG_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOG_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOG_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOG_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOG_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOG_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOG_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOG_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOG_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOG_PIN14) |          \
-                                     PIN_MODE_INPUT(GPIOG_PIN15))
-#define VAL_GPIOG_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN14) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOG_PIN15))
-#define VAL_GPIOG_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOG_PIN0) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOG_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOG_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOG_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOG_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOG_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOG_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOG_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOG_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOG_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOG_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOG_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOG_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOG_PIN13) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOG_PIN14) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOG_PIN15))
-#define VAL_GPIOG_PUPDR             (PIN_PUPDR_PULLUP(GPIOG_PIN0) |         \
-                                     PIN_PUPDR_PULLUP(GPIOG_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOG_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOG_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOG_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOG_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOG_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOG_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOG_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOG_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOG_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOG_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOG_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOG_PIN13) |        \
-                                     PIN_PUPDR_PULLUP(GPIOG_PIN14) |        \
-                                     PIN_PUPDR_PULLUP(GPIOG_PIN15))
-#define VAL_GPIOG_ODR               (PIN_ODR_HIGH(GPIOG_PIN0) |             \
-                                     PIN_ODR_HIGH(GPIOG_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOG_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOG_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOG_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOG_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOG_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOG_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOG_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOG_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOG_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOG_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOG_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOG_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOG_PIN14) |            \
-                                     PIN_ODR_HIGH(GPIOG_PIN15))
-#define VAL_GPIOG_AFRL              (PIN_AFIO_AF(GPIOG_PIN0, 0) |           \
-                                     PIN_AFIO_AF(GPIOG_PIN1, 0) |           \
-                                     PIN_AFIO_AF(GPIOG_PIN2, 0) |           \
-                                     PIN_AFIO_AF(GPIOG_PIN3, 0) |           \
-                                     PIN_AFIO_AF(GPIOG_PIN4, 0) |           \
-                                     PIN_AFIO_AF(GPIOG_PIN5, 0) |           \
-                                     PIN_AFIO_AF(GPIOG_PIN6, 0) |           \
-                                     PIN_AFIO_AF(GPIOG_PIN7, 0))
-#define VAL_GPIOG_AFRH              (PIN_AFIO_AF(GPIOG_PIN8, 0) |           \
-                                     PIN_AFIO_AF(GPIOG_PIN9, 0) |           \
-                                     PIN_AFIO_AF(GPIOG_PIN10, 0) |          \
-                                     PIN_AFIO_AF(GPIOG_PIN11, 0) |          \
-                                     PIN_AFIO_AF(GPIOG_PIN12, 0) |          \
-                                     PIN_AFIO_AF(GPIOG_PIN13, 0) |          \
-                                     PIN_AFIO_AF(GPIOG_PIN14, 0) |          \
-                                     PIN_AFIO_AF(GPIOG_PIN15, 0))
+#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | PIN_MODE_INPUT(GPIOG_PIN1) | PIN_MODE_INPUT(GPIOG_PIN2) | PIN_MODE_INPUT(GPIOG_PIN3) | PIN_MODE_INPUT(GPIOG_PIN4) | PIN_MODE_INPUT(GPIOG_PIN5) | PIN_MODE_INPUT(GPIOG_PIN6) | PIN_MODE_INPUT(GPIOG_PIN7) | PIN_MODE_INPUT(GPIOG_PIN8) | PIN_MODE_INPUT(GPIOG_PIN9) | PIN_MODE_INPUT(GPIOG_PIN10) | PIN_MODE_INPUT(GPIOG_PIN11) | PIN_MODE_INPUT(GPIOG_PIN12) | PIN_MODE_INPUT(GPIOG_PIN13) | PIN_MODE_INPUT(GPIOG_PIN14) | PIN_MODE_INPUT(GPIOG_PIN15))
+#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | PIN_OTYPE_PUSHPULL(GPIOG_PIN15))
+#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOG_PIN0) | PIN_OSPEED_VERYLOW(GPIOG_PIN1) | PIN_OSPEED_VERYLOW(GPIOG_PIN2) | PIN_OSPEED_VERYLOW(GPIOG_PIN3) | PIN_OSPEED_VERYLOW(GPIOG_PIN4) | PIN_OSPEED_VERYLOW(GPIOG_PIN5) | PIN_OSPEED_VERYLOW(GPIOG_PIN6) | PIN_OSPEED_VERYLOW(GPIOG_PIN7) | PIN_OSPEED_VERYLOW(GPIOG_PIN8) | PIN_OSPEED_VERYLOW(GPIOG_PIN9) | PIN_OSPEED_VERYLOW(GPIOG_PIN10) | PIN_OSPEED_VERYLOW(GPIOG_PIN11) | PIN_OSPEED_VERYLOW(GPIOG_PIN12) | PIN_OSPEED_VERYLOW(GPIOG_PIN13) | PIN_OSPEED_VERYLOW(GPIOG_PIN14) | PIN_OSPEED_VERYLOW(GPIOG_PIN15))
+#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | PIN_PUPDR_PULLUP(GPIOG_PIN1) | PIN_PUPDR_PULLUP(GPIOG_PIN2) | PIN_PUPDR_PULLUP(GPIOG_PIN3) | PIN_PUPDR_PULLUP(GPIOG_PIN4) | PIN_PUPDR_PULLUP(GPIOG_PIN5) | PIN_PUPDR_PULLUP(GPIOG_PIN6) | PIN_PUPDR_PULLUP(GPIOG_PIN7) | PIN_PUPDR_PULLUP(GPIOG_PIN8) | PIN_PUPDR_PULLUP(GPIOG_PIN9) | PIN_PUPDR_PULLUP(GPIOG_PIN10) | PIN_PUPDR_PULLUP(GPIOG_PIN11) | PIN_PUPDR_PULLUP(GPIOG_PIN12) | PIN_PUPDR_PULLUP(GPIOG_PIN13) | PIN_PUPDR_PULLUP(GPIOG_PIN14) | PIN_PUPDR_PULLUP(GPIOG_PIN15))
+#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | PIN_ODR_HIGH(GPIOG_PIN1) | PIN_ODR_HIGH(GPIOG_PIN2) | PIN_ODR_HIGH(GPIOG_PIN3) | PIN_ODR_HIGH(GPIOG_PIN4) | PIN_ODR_HIGH(GPIOG_PIN5) | PIN_ODR_HIGH(GPIOG_PIN6) | PIN_ODR_HIGH(GPIOG_PIN7) | PIN_ODR_HIGH(GPIOG_PIN8) | PIN_ODR_HIGH(GPIOG_PIN9) | PIN_ODR_HIGH(GPIOG_PIN10) | PIN_ODR_HIGH(GPIOG_PIN11) | PIN_ODR_HIGH(GPIOG_PIN12) | PIN_ODR_HIGH(GPIOG_PIN13) | PIN_ODR_HIGH(GPIOG_PIN14) | PIN_ODR_HIGH(GPIOG_PIN15))
+#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0) | PIN_AFIO_AF(GPIOG_PIN1, 0) | PIN_AFIO_AF(GPIOG_PIN2, 0) | PIN_AFIO_AF(GPIOG_PIN3, 0) | PIN_AFIO_AF(GPIOG_PIN4, 0) | PIN_AFIO_AF(GPIOG_PIN5, 0) | PIN_AFIO_AF(GPIOG_PIN6, 0) | PIN_AFIO_AF(GPIOG_PIN7, 0))
+#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0) | PIN_AFIO_AF(GPIOG_PIN9, 0) | PIN_AFIO_AF(GPIOG_PIN10, 0) | PIN_AFIO_AF(GPIOG_PIN11, 0) | PIN_AFIO_AF(GPIOG_PIN12, 0) | PIN_AFIO_AF(GPIOG_PIN13, 0) | PIN_AFIO_AF(GPIOG_PIN14, 0) | PIN_AFIO_AF(GPIOG_PIN15, 0))
 
 /*
  * GPIOH setup:
@@ -1063,103 +439,13 @@
  * PH14 - PIN14                     (input pullup).
  * PH15 - PIN15                     (input pullup).
  */
-#define VAL_GPIOH_MODER             (PIN_MODE_INPUT(GPIOH_PIN0) |           \
-                                     PIN_MODE_INPUT(GPIOH_PIN1) |           \
-                                     PIN_MODE_INPUT(GPIOH_PIN2) |           \
-                                     PIN_MODE_INPUT(GPIOH_PIN3) |           \
-                                     PIN_MODE_INPUT(GPIOH_PIN4) |           \
-                                     PIN_MODE_INPUT(GPIOH_PIN5) |           \
-                                     PIN_MODE_INPUT(GPIOH_PIN6) |           \
-                                     PIN_MODE_INPUT(GPIOH_PIN7) |           \
-                                     PIN_MODE_INPUT(GPIOH_PIN8) |           \
-                                     PIN_MODE_INPUT(GPIOH_PIN9) |           \
-                                     PIN_MODE_INPUT(GPIOH_PIN10) |          \
-                                     PIN_MODE_INPUT(GPIOH_PIN11) |          \
-                                     PIN_MODE_INPUT(GPIOH_PIN12) |          \
-                                     PIN_MODE_INPUT(GPIOH_PIN13) |          \
-                                     PIN_MODE_INPUT(GPIOH_PIN14) |          \
-                                     PIN_MODE_INPUT(GPIOH_PIN15))
-#define VAL_GPIOH_OTYPER            (PIN_OTYPE_PUSHPULL(GPIOH_PIN0) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN1) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN2) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN3) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN4) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN5) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN6) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN7) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN8) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN9) |       \
-                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN10) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN11) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN12) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN13) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN14) |      \
-                                     PIN_OTYPE_PUSHPULL(GPIOH_PIN15))
-#define VAL_GPIOH_OSPEEDR           (PIN_OSPEED_VERYLOW(GPIOH_PIN0) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOH_PIN1) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOH_PIN2) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOH_PIN3) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOH_PIN4) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOH_PIN5) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOH_PIN6) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOH_PIN7) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOH_PIN8) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOH_PIN9) |       \
-                                     PIN_OSPEED_VERYLOW(GPIOH_PIN10) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOH_PIN11) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOH_PIN12) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOH_PIN13) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOH_PIN14) |      \
-                                     PIN_OSPEED_VERYLOW(GPIOH_PIN15))
-#define VAL_GPIOH_PUPDR             (PIN_PUPDR_PULLUP(GPIOH_PIN0) |         \
-                                     PIN_PUPDR_PULLUP(GPIOH_PIN1) |         \
-                                     PIN_PUPDR_PULLUP(GPIOH_PIN2) |         \
-                                     PIN_PUPDR_PULLUP(GPIOH_PIN3) |         \
-                                     PIN_PUPDR_PULLUP(GPIOH_PIN4) |         \
-                                     PIN_PUPDR_PULLUP(GPIOH_PIN5) |         \
-                                     PIN_PUPDR_PULLUP(GPIOH_PIN6) |         \
-                                     PIN_PUPDR_PULLUP(GPIOH_PIN7) |         \
-                                     PIN_PUPDR_PULLUP(GPIOH_PIN8) |         \
-                                     PIN_PUPDR_PULLUP(GPIOH_PIN9) |         \
-                                     PIN_PUPDR_PULLUP(GPIOH_PIN10) |        \
-                                     PIN_PUPDR_PULLUP(GPIOH_PIN11) |        \
-                                     PIN_PUPDR_PULLUP(GPIOH_PIN12) |        \
-                                     PIN_PUPDR_PULLUP(GPIOH_PIN13) |        \
-                                     PIN_PUPDR_PULLUP(GPIOH_PIN14) |        \
-                                     PIN_PUPDR_PULLUP(GPIOH_PIN15))
-#define VAL_GPIOH_ODR               (PIN_ODR_HIGH(GPIOH_PIN0) |             \
-                                     PIN_ODR_HIGH(GPIOH_PIN1) |             \
-                                     PIN_ODR_HIGH(GPIOH_PIN2) |             \
-                                     PIN_ODR_HIGH(GPIOH_PIN3) |             \
-                                     PIN_ODR_HIGH(GPIOH_PIN4) |             \
-                                     PIN_ODR_HIGH(GPIOH_PIN5) |             \
-                                     PIN_ODR_HIGH(GPIOH_PIN6) |             \
-                                     PIN_ODR_HIGH(GPIOH_PIN7) |             \
-                                     PIN_ODR_HIGH(GPIOH_PIN8) |             \
-                                     PIN_ODR_HIGH(GPIOH_PIN9) |             \
-                                     PIN_ODR_HIGH(GPIOH_PIN10) |            \
-                                     PIN_ODR_HIGH(GPIOH_PIN11) |            \
-                                     PIN_ODR_HIGH(GPIOH_PIN12) |            \
-                                     PIN_ODR_HIGH(GPIOH_PIN13) |            \
-                                     PIN_ODR_HIGH(GPIOH_PIN14) |            \
-                                     PIN_ODR_HIGH(GPIOH_PIN15))
-#define VAL_GPIOH_AFRL              (PIN_AFIO_AF(GPIOH_PIN0, 0) |           \
-                                     PIN_AFIO_AF(GPIOH_PIN1, 0) |           \
-                                     PIN_AFIO_AF(GPIOH_PIN2, 0) |           \
-                                     PIN_AFIO_AF(GPIOH_PIN3, 0) |           \
-                                     PIN_AFIO_AF(GPIOH_PIN4, 0) |           \
-                                     PIN_AFIO_AF(GPIOH_PIN5, 0) |           \
-                                     PIN_AFIO_AF(GPIOH_PIN6, 0) |           \
-                                     PIN_AFIO_AF(GPIOH_PIN7, 0))
-#define VAL_GPIOH_AFRH              (PIN_AFIO_AF(GPIOH_PIN8, 0) |           \
-                                     PIN_AFIO_AF(GPIOH_PIN9, 0) |           \
-                                     PIN_AFIO_AF(GPIOH_PIN10, 0) |          \
-                                     PIN_AFIO_AF(GPIOH_PIN11, 0) |          \
-                                     PIN_AFIO_AF(GPIOH_PIN12, 0) |          \
-                                     PIN_AFIO_AF(GPIOH_PIN13, 0) |          \
-                                     PIN_AFIO_AF(GPIOH_PIN14, 0) |          \
-                                     PIN_AFIO_AF(GPIOH_PIN15, 0))
-
+#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_PIN0) | PIN_MODE_INPUT(GPIOH_PIN1) | PIN_MODE_INPUT(GPIOH_PIN2) | PIN_MODE_INPUT(GPIOH_PIN3) | PIN_MODE_INPUT(GPIOH_PIN4) | PIN_MODE_INPUT(GPIOH_PIN5) | PIN_MODE_INPUT(GPIOH_PIN6) | PIN_MODE_INPUT(GPIOH_PIN7) | PIN_MODE_INPUT(GPIOH_PIN8) | PIN_MODE_INPUT(GPIOH_PIN9) | PIN_MODE_INPUT(GPIOH_PIN10) | PIN_MODE_INPUT(GPIOH_PIN11) | PIN_MODE_INPUT(GPIOH_PIN12) | PIN_MODE_INPUT(GPIOH_PIN13) | PIN_MODE_INPUT(GPIOH_PIN14) | PIN_MODE_INPUT(GPIOH_PIN15))
+#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_PIN0) | PIN_OTYPE_PUSHPULL(GPIOH_PIN1) | PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | PIN_OTYPE_PUSHPULL(GPIOH_PIN15))
+#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOH_PIN0) | PIN_OSPEED_VERYLOW(GPIOH_PIN1) | PIN_OSPEED_VERYLOW(GPIOH_PIN2) | PIN_OSPEED_VERYLOW(GPIOH_PIN3) | PIN_OSPEED_VERYLOW(GPIOH_PIN4) | PIN_OSPEED_VERYLOW(GPIOH_PIN5) | PIN_OSPEED_VERYLOW(GPIOH_PIN6) | PIN_OSPEED_VERYLOW(GPIOH_PIN7) | PIN_OSPEED_VERYLOW(GPIOH_PIN8) | PIN_OSPEED_VERYLOW(GPIOH_PIN9) | PIN_OSPEED_VERYLOW(GPIOH_PIN10) | PIN_OSPEED_VERYLOW(GPIOH_PIN11) | PIN_OSPEED_VERYLOW(GPIOH_PIN12) | PIN_OSPEED_VERYLOW(GPIOH_PIN13) | PIN_OSPEED_VERYLOW(GPIOH_PIN14) | PIN_OSPEED_VERYLOW(GPIOH_PIN15))
+#define VAL_GPIOH_PUPDR (PIN_PUPDR_PULLUP(GPIOH_PIN0) | PIN_PUPDR_PULLUP(GPIOH_PIN1) | PIN_PUPDR_PULLUP(GPIOH_PIN2) | PIN_PUPDR_PULLUP(GPIOH_PIN3) | PIN_PUPDR_PULLUP(GPIOH_PIN4) | PIN_PUPDR_PULLUP(GPIOH_PIN5) | PIN_PUPDR_PULLUP(GPIOH_PIN6) | PIN_PUPDR_PULLUP(GPIOH_PIN7) | PIN_PUPDR_PULLUP(GPIOH_PIN8) | PIN_PUPDR_PULLUP(GPIOH_PIN9) | PIN_PUPDR_PULLUP(GPIOH_PIN10) | PIN_PUPDR_PULLUP(GPIOH_PIN11) | PIN_PUPDR_PULLUP(GPIOH_PIN12) | PIN_PUPDR_PULLUP(GPIOH_PIN13) | PIN_PUPDR_PULLUP(GPIOH_PIN14) | PIN_PUPDR_PULLUP(GPIOH_PIN15))
+#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_PIN0) | PIN_ODR_HIGH(GPIOH_PIN1) | PIN_ODR_HIGH(GPIOH_PIN2) | PIN_ODR_HIGH(GPIOH_PIN3) | PIN_ODR_HIGH(GPIOH_PIN4) | PIN_ODR_HIGH(GPIOH_PIN5) | PIN_ODR_HIGH(GPIOH_PIN6) | PIN_ODR_HIGH(GPIOH_PIN7) | PIN_ODR_HIGH(GPIOH_PIN8) | PIN_ODR_HIGH(GPIOH_PIN9) | PIN_ODR_HIGH(GPIOH_PIN10) | PIN_ODR_HIGH(GPIOH_PIN11) | PIN_ODR_HIGH(GPIOH_PIN12) | PIN_ODR_HIGH(GPIOH_PIN13) | PIN_ODR_HIGH(GPIOH_PIN14) | PIN_ODR_HIGH(GPIOH_PIN15))
+#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_PIN0, 0) | PIN_AFIO_AF(GPIOH_PIN1, 0) | PIN_AFIO_AF(GPIOH_PIN2, 0) | PIN_AFIO_AF(GPIOH_PIN3, 0) | PIN_AFIO_AF(GPIOH_PIN4, 0) | PIN_AFIO_AF(GPIOH_PIN5, 0) | PIN_AFIO_AF(GPIOH_PIN6, 0) | PIN_AFIO_AF(GPIOH_PIN7, 0))
+#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0) | PIN_AFIO_AF(GPIOH_PIN9, 0) | PIN_AFIO_AF(GPIOH_PIN10, 0) | PIN_AFIO_AF(GPIOH_PIN11, 0) | PIN_AFIO_AF(GPIOH_PIN12, 0) | PIN_AFIO_AF(GPIOH_PIN13, 0) | PIN_AFIO_AF(GPIOH_PIN14, 0) | PIN_AFIO_AF(GPIOH_PIN15, 0))
 
 /*
  * USB bus activation macro, required by the USB driver.
@@ -1171,17 +457,19 @@
  * USB bus de-activation macro, required by the USB driver.
  */
 // #define usb_lld_disconnect_bus(usbp)
-#define usb_lld_disconnect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_OUTPUT_PUSHPULL)); palClearPad(GPIOA, GPIOA_USB_DP)
+#define usb_lld_disconnect_bus(usbp)                                \
+    (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_OUTPUT_PUSHPULL)); \
+    palClearPad(GPIOA, GPIOA_USB_DP)
 // #define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12)
 
 #if !defined(_FROM_ASM_)
-#ifdef __cplusplus
+#    ifdef __cplusplus
 extern "C" {
-#endif
-  void boardInit(void);
-#ifdef __cplusplus
+#    endif
+void boardInit(void);
+#    ifdef __cplusplus
 }
-#endif
+#    endif
 #endif /* _FROM_ASM_ */
 
 #endif /* _BOARD_H_ */
diff --git a/drivers/boards/IC_TEENSY_3_1/board.c b/drivers/boards/IC_TEENSY_3_1/board.c
index 1e952883d8..63e3f64929 100644
--- a/drivers/boards/IC_TEENSY_3_1/board.c
+++ b/drivers/boards/IC_TEENSY_3_1/board.c
@@ -21,154 +21,109 @@
  * @details Digital I/O ports static configuration as defined in @p board.h.
  *          This variable is used by the HAL when initializing the PAL driver.
  */
-const PALConfig pal_default_config =
-{
-    .ports = {
+const PALConfig pal_default_config = {
+    .ports =
         {
-            /*
-             * PORTA setup.
-             *
-             * PTA4  - PIN33
-             * PTA5  - PIN24
-             * PTA12 - PIN3
-             * PTA13 - PIN4
-             *
-             * PTA18/19 crystal
-             * PTA0/3 SWD
-             */
-            .port = IOPORT1,
-            .pads = {
-                PAL_MODE_ALTERNATIVE_7,     PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_ALTERNATIVE_7,     PAL_MODE_OUTPUT_PUSHPULL,   PAL_MODE_OUTPUT_PUSHPULL,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_OUTPUT_PUSHPULL,   PAL_MODE_OUTPUT_PUSHPULL,   PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_INPUT_ANALOG,      PAL_MODE_INPUT_ANALOG,      PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
+            {
+                /*
+                 * PORTA setup.
+                 *
+                 * PTA4  - PIN33
+                 * PTA5  - PIN24
+                 * PTA12 - PIN3
+                 * PTA13 - PIN4
+                 *
+                 * PTA18/19 crystal
+                 * PTA0/3 SWD
+                 */
+                .port = IOPORT1,
+                .pads =
+                    {
+                        PAL_MODE_ALTERNATIVE_7, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_ALTERNATIVE_7, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_INPUT_ANALOG, PAL_MODE_INPUT_ANALOG, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+                    },
             },
-        },
-        {
-            /*
-             * PORTB setup.
-             *
-             * PTB0  - PIN16
-             * PTB1  - PIN17
-             * PTB2  - PIN19
-             * PTB3  - PIN18
-             * PTB16 - PIN0 - UART0_TX
-             * PTB17 - PIN1 - UART0_RX
-             * PTB18 - PIN32
-             * PTB19 - PIN25
-             */
-            .port = IOPORT2,
-            .pads = {
-                PAL_MODE_OUTPUT_PUSHPULL,   PAL_MODE_OUTPUT_PUSHPULL,   PAL_MODE_OUTPUT_PUSHPULL,
-                PAL_MODE_OUTPUT_PUSHPULL,   PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_ALTERNATIVE_3,     PAL_MODE_ALTERNATIVE_3,
-                PAL_MODE_OUTPUT_PUSHPULL,   PAL_MODE_OUTPUT_PUSHPULL,   PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
+            {
+                /*
+                 * PORTB setup.
+                 *
+                 * PTB0  - PIN16
+                 * PTB1  - PIN17
+                 * PTB2  - PIN19
+                 * PTB3  - PIN18
+                 * PTB16 - PIN0 - UART0_TX
+                 * PTB17 - PIN1 - UART0_RX
+                 * PTB18 - PIN32
+                 * PTB19 - PIN25
+                 */
+                .port = IOPORT2,
+                .pads =
+                    {
+                        PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_ALTERNATIVE_3, PAL_MODE_ALTERNATIVE_3, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+                    },
             },
-        },
-        {
-            /*
-             * PORTC setup.
-             *
-             * PTC0  - PIN15
-             * PTC1  - PIN22
-             * PTC2  - PIN23
-             * PTC3  - PIN9
-             * PTC4  - PIN10
-             * PTC5  - PIN13
-             * PTC6  - PIN11
-             * PTC7  - PIN12
-             * PTC8  - PIN28
-             * PTC9  - PIN27
-             * PTC10 - PIN29
-             * PTC11 - PIN30
-             */
-            .port = IOPORT3,
-            .pads = {
-                PAL_MODE_OUTPUT_PUSHPULL,   PAL_MODE_OUTPUT_PUSHPULL,   PAL_MODE_OUTPUT_PUSHPULL,
-                PAL_MODE_OUTPUT_PUSHPULL,   PAL_MODE_OUTPUT_PUSHPULL,   PAL_MODE_OUTPUT_PUSHPULL,
-                PAL_MODE_OUTPUT_PUSHPULL,   PAL_MODE_OUTPUT_PUSHPULL,   PAL_MODE_OUTPUT_PUSHPULL,
-                PAL_MODE_OUTPUT_PUSHPULL,   PAL_MODE_OUTPUT_PUSHPULL,   PAL_MODE_OUTPUT_PUSHPULL,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
+            {
+                /*
+                 * PORTC setup.
+                 *
+                 * PTC0  - PIN15
+                 * PTC1  - PIN22
+                 * PTC2  - PIN23
+                 * PTC3  - PIN9
+                 * PTC4  - PIN10
+                 * PTC5  - PIN13
+                 * PTC6  - PIN11
+                 * PTC7  - PIN12
+                 * PTC8  - PIN28
+                 * PTC9  - PIN27
+                 * PTC10 - PIN29
+                 * PTC11 - PIN30
+                 */
+                .port = IOPORT3,
+                .pads =
+                    {
+                        PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+                    },
             },
-        },
-        {
-            /*
-             * PORTD setup.
-             *
-             * PTD0  - PIN2
-             * PTD1  - PIN14
-             * PTD2  - PIN7
-             * PTD3  - PIN8
-             * PTD4  - PIN6
-             * PTD5  - PIN20
-             * PTD6  - PIN21
-             * PTD7  - PIN5
-             */
-            .port = IOPORT4,
-            .pads = {
-                PAL_MODE_OUTPUT_PUSHPULL,   PAL_MODE_OUTPUT_PUSHPULL,   PAL_MODE_OUTPUT_PUSHPULL,
-                PAL_MODE_OUTPUT_PUSHPULL,   PAL_MODE_OUTPUT_PUSHPULL,   PAL_MODE_OUTPUT_PUSHPULL,
-                PAL_MODE_OUTPUT_PUSHPULL,   PAL_MODE_OUTPUT_PUSHPULL,   PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
+            {
+                /*
+                 * PORTD setup.
+                 *
+                 * PTD0  - PIN2
+                 * PTD1  - PIN14
+                 * PTD2  - PIN7
+                 * PTD3  - PIN8
+                 * PTD4  - PIN6
+                 * PTD5  - PIN20
+                 * PTD6  - PIN21
+                 * PTD7  - PIN5
+                 */
+                .port = IOPORT4,
+                .pads =
+                    {
+                        PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+                    },
             },
-        },
-        {
-            /*
-             * PORTE setup.
-             *
-             * PTE0  - PIN31
-             * PTE1  - PIN26
-             */
-            .port = IOPORT5,
-            .pads = {
-                PAL_MODE_OUTPUT_PUSHPULL,   PAL_MODE_OUTPUT_PUSHPULL,   PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
-                PAL_MODE_UNCONNECTED,       PAL_MODE_UNCONNECTED,
+            {
+                /*
+                 * PORTE setup.
+                 *
+                 * PTE0  - PIN31
+                 * PTE1  - PIN26
+                 */
+                .port = IOPORT5,
+                .pads =
+                    {
+                        PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+                    },
             },
         },
-    },
 };
 #endif
 
 // NOTE: This value comes from kiibohd/controller and is the location of a value
 // which needs to be checked before disabling the watchdog (which happens in
 // k20x_clock_init)
-#define WDOG_TMROUTL            *(volatile uint16_t *)0x40052012
+#define WDOG_TMROUTL *(volatile uint16_t *)0x40052012
 
 /**
  * @brief   Early initialization code.
@@ -176,16 +131,16 @@ const PALConfig pal_default_config =
  *          and before any other initialization.
  */
 void __early_init(void) {
-  // This is a dirty hack and should only be used as a temporary fix until this
-  // is upstreamed.
-  while (WDOG_TMROUTL < 2); // Must wait for WDOG timer if already running, before jumping
+    // This is a dirty hack and should only be used as a temporary fix until this
+    // is upstreamed.
+    while (WDOG_TMROUTL < 2)
+        ;  // Must wait for WDOG timer if already running, before jumping
 
-  k20x_clock_init();
+    k20x_clock_init();
 }
 
 /**
  * @brief   Board-specific initialization code.
  * @todo    Add your board-specific code, if any.
  */
-void boardInit(void) {
-}
+void boardInit(void) {}
diff --git a/drivers/boards/IC_TEENSY_3_1/board.h b/drivers/boards/IC_TEENSY_3_1/board.h
index 8853395efe..c8259ab0c7 100644
--- a/drivers/boards/IC_TEENSY_3_1/board.h
+++ b/drivers/boards/IC_TEENSY_3_1/board.h
@@ -25,13 +25,13 @@
  * Board identifier.
  */
 #define BOARD_PJRC_TEENSY_3_1
-#define BOARD_NAME                  "PJRC Teensy 3.1"
+#define BOARD_NAME "PJRC Teensy 3.1"
 
 /* External 16 MHz crystal */
-#define KINETIS_XTAL_FREQUENCY      16000000UL
+#define KINETIS_XTAL_FREQUENCY 16000000UL
 
 /* Use internal capacitors for the crystal */
-#define KINETIS_BOARD_OSCILLATOR_SETTING OSC_CR_SC8P|OSC_CR_SC2P
+#define KINETIS_BOARD_OSCILLATOR_SETTING OSC_CR_SC8P | OSC_CR_SC2P
 
 /*
  * MCU type
@@ -41,79 +41,79 @@
 /*
  * IO pins assignments.
  */
-#define PORTA_PIN0                  0
-#define PORTA_PIN1                  1
-#define PORTA_PIN2                  2
-#define PORTA_PIN3                  3
-#define TEENSY_PIN33                4
-#define TEENSY_PIN24                5
-#define PORTA_PIN6                  6
-#define PORTA_PIN7                  7
-#define PORTA_PIN8                  8
-#define PORTA_PIN9                  9
-#define PORTA_PIN10                 10
-#define PORTA_PIN11                 11
-#define TEENSY_PIN3                 12
-#define TEENSY_PIN4                 13
-#define PORTA_PIN14                 14
-#define PORTA_PIN15                 15
-#define PORTA_PIN16                 16
-#define PORTA_PIN17                 17
-#define PORTA_PIN18                 18
-#define PORTA_PIN19                 19
-#define PORTA_PIN20                 20
-#define PORTA_PIN21                 21
-#define PORTA_PIN22                 22
-#define PORTA_PIN23                 23
-#define PORTA_PIN24                 24
-#define PORTA_PIN25                 25
-#define PORTA_PIN26                 26
-#define PORTA_PIN27                 27
-#define PORTA_PIN28                 28
-#define PORTA_PIN29                 29
-#define PORTA_PIN30                 30
-#define PORTA_PIN31                 31
+#define PORTA_PIN0 0
+#define PORTA_PIN1 1
+#define PORTA_PIN2 2
+#define PORTA_PIN3 3
+#define TEENSY_PIN33 4
+#define TEENSY_PIN24 5
+#define PORTA_PIN6 6
+#define PORTA_PIN7 7
+#define PORTA_PIN8 8
+#define PORTA_PIN9 9
+#define PORTA_PIN10 10
+#define PORTA_PIN11 11
+#define TEENSY_PIN3 12
+#define TEENSY_PIN4 13
+#define PORTA_PIN14 14
+#define PORTA_PIN15 15
+#define PORTA_PIN16 16
+#define PORTA_PIN17 17
+#define PORTA_PIN18 18
+#define PORTA_PIN19 19
+#define PORTA_PIN20 20
+#define PORTA_PIN21 21
+#define PORTA_PIN22 22
+#define PORTA_PIN23 23
+#define PORTA_PIN24 24
+#define PORTA_PIN25 25
+#define PORTA_PIN26 26
+#define PORTA_PIN27 27
+#define PORTA_PIN28 28
+#define PORTA_PIN29 29
+#define PORTA_PIN30 30
+#define PORTA_PIN31 31
 
-#define TEENSY_PIN3_IOPORT  IOPORT1
-#define TEENSY_PIN4_IOPORT  IOPORT1
+#define TEENSY_PIN3_IOPORT IOPORT1
+#define TEENSY_PIN4_IOPORT IOPORT1
 #define TEENSY_PIN24_IOPORT IOPORT1
 #define TEENSY_PIN33_IOPORT IOPORT1
 
-#define TEENSY_PIN16                0
-#define TEENSY_PIN17                1
-#define TEENSY_PIN19                2
-#define TEENSY_PIN18                3
-#define PORTB_PIN4                  4
-#define PORTB_PIN5                  5
-#define PORTB_PIN6                  6
-#define PORTB_PIN7                  7
-#define PORTB_PIN8                  8
-#define PORTB_PIN9                  9
-#define PORTB_PIN10                 10
-#define PORTB_PIN11                 11
-#define PORTB_PIN12                 12
-#define PORTB_PIN13                 13
-#define PORTB_PIN14                 14
-#define PORTB_PIN15                 15
-#define TEENSY_PIN0                 16
-#define TEENSY_PIN1                 17
-#define TEENSY_PIN32                18
-#define TEENSY_PIN25                19
-#define PORTB_PIN20                 20
-#define PORTB_PIN21                 21
-#define PORTB_PIN22                 22
-#define PORTB_PIN23                 23
-#define PORTB_PIN24                 24
-#define PORTB_PIN25                 25
-#define PORTB_PIN26                 26
-#define PORTB_PIN27                 27
-#define PORTB_PIN28                 28
-#define PORTB_PIN29                 29
-#define PORTB_PIN30                 30
-#define PORTB_PIN31                 31
+#define TEENSY_PIN16 0
+#define TEENSY_PIN17 1
+#define TEENSY_PIN19 2
+#define TEENSY_PIN18 3
+#define PORTB_PIN4 4
+#define PORTB_PIN5 5
+#define PORTB_PIN6 6
+#define PORTB_PIN7 7
+#define PORTB_PIN8 8
+#define PORTB_PIN9 9
+#define PORTB_PIN10 10
+#define PORTB_PIN11 11
+#define PORTB_PIN12 12
+#define PORTB_PIN13 13
+#define PORTB_PIN14 14
+#define PORTB_PIN15 15
+#define TEENSY_PIN0 16
+#define TEENSY_PIN1 17
+#define TEENSY_PIN32 18
+#define TEENSY_PIN25 19
+#define PORTB_PIN20 20
+#define PORTB_PIN21 21
+#define PORTB_PIN22 22
+#define PORTB_PIN23 23
+#define PORTB_PIN24 24
+#define PORTB_PIN25 25
+#define PORTB_PIN26 26
+#define PORTB_PIN27 27
+#define PORTB_PIN28 28
+#define PORTB_PIN29 29
+#define PORTB_PIN30 30
+#define PORTB_PIN31 31
 
-#define TEENSY_PIN0_IOPORT  IOPORT2
-#define TEENSY_PIN1_IOPORT  IOPORT2
+#define TEENSY_PIN0_IOPORT IOPORT2
+#define TEENSY_PIN1_IOPORT IOPORT2
 #define TEENSY_PIN16_IOPORT IOPORT2
 #define TEENSY_PIN17_IOPORT IOPORT2
 #define TEENSY_PIN18_IOPORT IOPORT2
@@ -121,40 +121,40 @@
 #define TEENSY_PIN25_IOPORT IOPORT2
 #define TEENSY_PIN32_IOPORT IOPORT2
 
-#define TEENSY_PIN15                0
-#define TEENSY_PIN22                1
-#define TEENSY_PIN23                2
-#define TEENSY_PIN9                 3
-#define TEENSY_PIN10                4
-#define TEENSY_PIN13                5
-#define TEENSY_PIN11                6
-#define TEENSY_PIN12                7
-#define TEENSY_PIN28                8
-#define TEENSY_PIN27                9
-#define TEENSY_PIN29                10
-#define TEENSY_PIN30                11
-#define PORTC_PIN12                 12
-#define PORTC_PIN13                 13
-#define PORTC_PIN14                 14
-#define PORTC_PIN15                 15
-#define PORTC_PIN16                 16
-#define PORTC_PIN17                 17
-#define PORTC_PIN18                 18
-#define PORTC_PIN19                 19
-#define PORTC_PIN20                 20
-#define PORTC_PIN21                 21
-#define PORTC_PIN22                 22
-#define PORTC_PIN23                 23
-#define PORTC_PIN24                 24
-#define PORTC_PIN25                 25
-#define PORTC_PIN26                 26
-#define PORTC_PIN27                 27
-#define PORTC_PIN28                 28
-#define PORTC_PIN29                 29
-#define PORTC_PIN30                 30
-#define PORTC_PIN31                 31
+#define TEENSY_PIN15 0
+#define TEENSY_PIN22 1
+#define TEENSY_PIN23 2
+#define TEENSY_PIN9 3
+#define TEENSY_PIN10 4
+#define TEENSY_PIN13 5
+#define TEENSY_PIN11 6
+#define TEENSY_PIN12 7
+#define TEENSY_PIN28 8
+#define TEENSY_PIN27 9
+#define TEENSY_PIN29 10
+#define TEENSY_PIN30 11
+#define PORTC_PIN12 12
+#define PORTC_PIN13 13
+#define PORTC_PIN14 14
+#define PORTC_PIN15 15
+#define PORTC_PIN16 16
+#define PORTC_PIN17 17
+#define PORTC_PIN18 18
+#define PORTC_PIN19 19
+#define PORTC_PIN20 20
+#define PORTC_PIN21 21
+#define PORTC_PIN22 22
+#define PORTC_PIN23 23
+#define PORTC_PIN24 24
+#define PORTC_PIN25 25
+#define PORTC_PIN26 26
+#define PORTC_PIN27 27
+#define PORTC_PIN28 28
+#define PORTC_PIN29 29
+#define PORTC_PIN30 30
+#define PORTC_PIN31 31
 
-#define TEENSY_PIN9_IOPORT  IOPORT3
+#define TEENSY_PIN9_IOPORT IOPORT3
 #define TEENSY_PIN10_IOPORT IOPORT3
 #define TEENSY_PIN11_IOPORT IOPORT3
 #define TEENSY_PIN12_IOPORT IOPORT3
@@ -167,129 +167,129 @@
 #define TEENSY_PIN29_IOPORT IOPORT3
 #define TEENSY_PIN30_IOPORT IOPORT3
 
-#define TEENSY_PIN2                 0
-#define TEENSY_PIN14                1
-#define TEENSY_PIN7                 2
-#define TEENSY_PIN8                 3
-#define TEENSY_PIN6                 4
-#define TEENSY_PIN20                5
-#define TEENSY_PIN21                6
-#define TEENSY_PIN5                 7
-#define PORTD_PIN8                  8
-#define PORTD_PIN9                  9
-#define PORTD_PIN10                 10
-#define PORTD_PIN11                 11
-#define PORTD_PIN12                 12
-#define PORTD_PIN13                 13
-#define PORTD_PIN14                 14
-#define PORTD_PIN15                 15
-#define PORTD_PIN16                 16
-#define PORTD_PIN17                 17
-#define PORTD_PIN18                 18
-#define PORTD_PIN19                 19
-#define PORTD_PIN20                 20
-#define PORTD_PIN21                 21
-#define PORTD_PIN22                 22
-#define PORTD_PIN23                 23
-#define PORTD_PIN24                 24
-#define PORTD_PIN25                 25
-#define PORTD_PIN26                 26
-#define PORTD_PIN27                 27
-#define PORTD_PIN28                 28
-#define PORTD_PIN29                 29
-#define PORTD_PIN30                 30
-#define PORTD_PIN31                 31
+#define TEENSY_PIN2 0
+#define TEENSY_PIN14 1
+#define TEENSY_PIN7 2
+#define TEENSY_PIN8 3
+#define TEENSY_PIN6 4
+#define TEENSY_PIN20 5
+#define TEENSY_PIN21 6
+#define TEENSY_PIN5 7
+#define PORTD_PIN8 8
+#define PORTD_PIN9 9
+#define PORTD_PIN10 10
+#define PORTD_PIN11 11
+#define PORTD_PIN12 12
+#define PORTD_PIN13 13
+#define PORTD_PIN14 14
+#define PORTD_PIN15 15
+#define PORTD_PIN16 16
+#define PORTD_PIN17 17
+#define PORTD_PIN18 18
+#define PORTD_PIN19 19
+#define PORTD_PIN20 20
+#define PORTD_PIN21 21
+#define PORTD_PIN22 22
+#define PORTD_PIN23 23
+#define PORTD_PIN24 24
+#define PORTD_PIN25 25
+#define PORTD_PIN26 26
+#define PORTD_PIN27 27
+#define PORTD_PIN28 28
+#define PORTD_PIN29 29
+#define PORTD_PIN30 30
+#define PORTD_PIN31 31
 
-#define TEENSY_PIN2_IOPORT  IOPORT4
-#define TEENSY_PIN5_IOPORT  IOPORT4
-#define TEENSY_PIN6_IOPORT  IOPORT4
-#define TEENSY_PIN7_IOPORT  IOPORT4
-#define TEENSY_PIN8_IOPORT  IOPORT4
+#define TEENSY_PIN2_IOPORT IOPORT4
+#define TEENSY_PIN5_IOPORT IOPORT4
+#define TEENSY_PIN6_IOPORT IOPORT4
+#define TEENSY_PIN7_IOPORT IOPORT4
+#define TEENSY_PIN8_IOPORT IOPORT4
 #define TEENSY_PIN14_IOPORT IOPORT4
 #define TEENSY_PIN20_IOPORT IOPORT4
 #define TEENSY_PIN21_IOPORT IOPORT4
 
-#define TEENSY_PIN31                0
-#define TEENSY_PIN26                1
-#define PORTE_PIN2                  2
-#define PORTE_PIN3                  3
-#define PORTE_PIN4                  4
-#define PORTE_PIN5                  5
-#define PORTE_PIN6                  6
-#define PORTE_PIN7                  7
-#define PORTE_PIN8                  8
-#define PORTE_PIN9                  9
-#define PORTE_PIN10                 10
-#define PORTE_PIN11                 11
-#define PORTE_PIN12                 12
-#define PORTE_PIN13                 13
-#define PORTE_PIN14                 14
-#define PORTE_PIN15                 15
-#define PORTE_PIN16                 16
-#define PORTE_PIN17                 17
-#define PORTE_PIN18                 18
-#define PORTE_PIN19                 19
-#define PORTE_PIN20                 20
-#define PORTE_PIN21                 21
-#define PORTE_PIN22                 22
-#define PORTE_PIN23                 23
-#define PORTE_PIN24                 24
-#define PORTE_PIN25                 25
-#define PORTE_PIN26                 26
-#define PORTE_PIN27                 27
-#define PORTE_PIN28                 28
-#define PORTE_PIN29                 29
-#define PORTE_PIN30                 30
-#define PORTE_PIN31                 31
+#define TEENSY_PIN31 0
+#define TEENSY_PIN26 1
+#define PORTE_PIN2 2
+#define PORTE_PIN3 3
+#define PORTE_PIN4 4
+#define PORTE_PIN5 5
+#define PORTE_PIN6 6
+#define PORTE_PIN7 7
+#define PORTE_PIN8 8
+#define PORTE_PIN9 9
+#define PORTE_PIN10 10
+#define PORTE_PIN11 11
+#define PORTE_PIN12 12
+#define PORTE_PIN13 13
+#define PORTE_PIN14 14
+#define PORTE_PIN15 15
+#define PORTE_PIN16 16
+#define PORTE_PIN17 17
+#define PORTE_PIN18 18
+#define PORTE_PIN19 19
+#define PORTE_PIN20 20
+#define PORTE_PIN21 21
+#define PORTE_PIN22 22
+#define PORTE_PIN23 23
+#define PORTE_PIN24 24
+#define PORTE_PIN25 25
+#define PORTE_PIN26 26
+#define PORTE_PIN27 27
+#define PORTE_PIN28 28
+#define PORTE_PIN29 29
+#define PORTE_PIN30 30
+#define PORTE_PIN31 31
 
 #define TEENSY_PIN26_IOPORT IOPORT5
 #define TEENSY_PIN31_IOPORT IOPORT5
 
-#define LINE_PIN1           PAL_LINE(TEENSY_PIN1_IOPORT, TEENSY_PIN1)
-#define LINE_PIN2           PAL_LINE(TEENSY_PIN2_IOPORT, TEENSY_PIN2)
-#define LINE_PIN3           PAL_LINE(TEENSY_PIN3_IOPORT, TEENSY_PIN3)
-#define LINE_PIN4           PAL_LINE(TEENSY_PIN4_IOPORT, TEENSY_PIN4)
-#define LINE_PIN5           PAL_LINE(TEENSY_PIN5_IOPORT, TEENSY_PIN5)
-#define LINE_PIN6           PAL_LINE(TEENSY_PIN6_IOPORT, TEENSY_PIN6)
-#define LINE_PIN7           PAL_LINE(TEENSY_PIN7_IOPORT, TEENSY_PIN7)
-#define LINE_PIN8           PAL_LINE(TEENSY_PIN8_IOPORT, TEENSY_PIN8)
-#define LINE_PIN9           PAL_LINE(TEENSY_PIN9_IOPORT, TEENSY_PIN9)
-#define LINE_PIN10          PAL_LINE(TEENSY_PIN10_IOPORT, TEENSY_PIN10)
-#define LINE_PIN11          PAL_LINE(TEENSY_PIN11_IOPORT, TEENSY_PIN11)
-#define LINE_PIN12          PAL_LINE(TEENSY_PIN12_IOPORT, TEENSY_PIN12)
-#define LINE_PIN13          PAL_LINE(TEENSY_PIN13_IOPORT, TEENSY_PIN13)
-#define LINE_PIN14          PAL_LINE(TEENSY_PIN14_IOPORT, TEENSY_PIN14)
-#define LINE_PIN15          PAL_LINE(TEENSY_PIN15_IOPORT, TEENSY_PIN15)
-#define LINE_PIN16          PAL_LINE(TEENSY_PIN16_IOPORT, TEENSY_PIN16)
-#define LINE_PIN17          PAL_LINE(TEENSY_PIN17_IOPORT, TEENSY_PIN17)
-#define LINE_PIN18          PAL_LINE(TEENSY_PIN18_IOPORT, TEENSY_PIN18)
-#define LINE_PIN19          PAL_LINE(TEENSY_PIN19_IOPORT, TEENSY_PIN19)
-#define LINE_PIN20          PAL_LINE(TEENSY_PIN20_IOPORT, TEENSY_PIN20)
-#define LINE_PIN21          PAL_LINE(TEENSY_PIN21_IOPORT, TEENSY_PIN21)
-#define LINE_PIN22          PAL_LINE(TEENSY_PIN22_IOPORT, TEENSY_PIN22)
-#define LINE_PIN23          PAL_LINE(TEENSY_PIN23_IOPORT, TEENSY_PIN23)
-#define LINE_PIN24          PAL_LINE(TEENSY_PIN24_IOPORT, TEENSY_PIN24)
-#define LINE_PIN25          PAL_LINE(TEENSY_PIN25_IOPORT, TEENSY_PIN25)
-#define LINE_PIN25          PAL_LINE(TEENSY_PIN25_IOPORT, TEENSY_PIN25)
-#define LINE_PIN26          PAL_LINE(TEENSY_PIN26_IOPORT, TEENSY_PIN26)
-#define LINE_PIN27          PAL_LINE(TEENSY_PIN27_IOPORT, TEENSY_PIN27)
-#define LINE_PIN28          PAL_LINE(TEENSY_PIN28_IOPORT, TEENSY_PIN28)
-#define LINE_PIN29          PAL_LINE(TEENSY_PIN29_IOPORT, TEENSY_PIN29)
-#define LINE_PIN30          PAL_LINE(TEENSY_PIN30_IOPORT, TEENSY_PIN30)
-#define LINE_PIN31          PAL_LINE(TEENSY_PIN31_IOPORT, TEENSY_PIN31)
-#define LINE_PIN32          PAL_LINE(TEENSY_PIN32_IOPORT, TEENSY_PIN32)
-#define LINE_PIN33          PAL_LINE(TEENSY_PIN33_IOPORT, TEENSY_PIN33)
+#define LINE_PIN1 PAL_LINE(TEENSY_PIN1_IOPORT, TEENSY_PIN1)
+#define LINE_PIN2 PAL_LINE(TEENSY_PIN2_IOPORT, TEENSY_PIN2)
+#define LINE_PIN3 PAL_LINE(TEENSY_PIN3_IOPORT, TEENSY_PIN3)
+#define LINE_PIN4 PAL_LINE(TEENSY_PIN4_IOPORT, TEENSY_PIN4)
+#define LINE_PIN5 PAL_LINE(TEENSY_PIN5_IOPORT, TEENSY_PIN5)
+#define LINE_PIN6 PAL_LINE(TEENSY_PIN6_IOPORT, TEENSY_PIN6)
+#define LINE_PIN7 PAL_LINE(TEENSY_PIN7_IOPORT, TEENSY_PIN7)
+#define LINE_PIN8 PAL_LINE(TEENSY_PIN8_IOPORT, TEENSY_PIN8)
+#define LINE_PIN9 PAL_LINE(TEENSY_PIN9_IOPORT, TEENSY_PIN9)
+#define LINE_PIN10 PAL_LINE(TEENSY_PIN10_IOPORT, TEENSY_PIN10)
+#define LINE_PIN11 PAL_LINE(TEENSY_PIN11_IOPORT, TEENSY_PIN11)
+#define LINE_PIN12 PAL_LINE(TEENSY_PIN12_IOPORT, TEENSY_PIN12)
+#define LINE_PIN13 PAL_LINE(TEENSY_PIN13_IOPORT, TEENSY_PIN13)
+#define LINE_PIN14 PAL_LINE(TEENSY_PIN14_IOPORT, TEENSY_PIN14)
+#define LINE_PIN15 PAL_LINE(TEENSY_PIN15_IOPORT, TEENSY_PIN15)
+#define LINE_PIN16 PAL_LINE(TEENSY_PIN16_IOPORT, TEENSY_PIN16)
+#define LINE_PIN17 PAL_LINE(TEENSY_PIN17_IOPORT, TEENSY_PIN17)
+#define LINE_PIN18 PAL_LINE(TEENSY_PIN18_IOPORT, TEENSY_PIN18)
+#define LINE_PIN19 PAL_LINE(TEENSY_PIN19_IOPORT, TEENSY_PIN19)
+#define LINE_PIN20 PAL_LINE(TEENSY_PIN20_IOPORT, TEENSY_PIN20)
+#define LINE_PIN21 PAL_LINE(TEENSY_PIN21_IOPORT, TEENSY_PIN21)
+#define LINE_PIN22 PAL_LINE(TEENSY_PIN22_IOPORT, TEENSY_PIN22)
+#define LINE_PIN23 PAL_LINE(TEENSY_PIN23_IOPORT, TEENSY_PIN23)
+#define LINE_PIN24 PAL_LINE(TEENSY_PIN24_IOPORT, TEENSY_PIN24)
+#define LINE_PIN25 PAL_LINE(TEENSY_PIN25_IOPORT, TEENSY_PIN25)
+#define LINE_PIN25 PAL_LINE(TEENSY_PIN25_IOPORT, TEENSY_PIN25)
+#define LINE_PIN26 PAL_LINE(TEENSY_PIN26_IOPORT, TEENSY_PIN26)
+#define LINE_PIN27 PAL_LINE(TEENSY_PIN27_IOPORT, TEENSY_PIN27)
+#define LINE_PIN28 PAL_LINE(TEENSY_PIN28_IOPORT, TEENSY_PIN28)
+#define LINE_PIN29 PAL_LINE(TEENSY_PIN29_IOPORT, TEENSY_PIN29)
+#define LINE_PIN30 PAL_LINE(TEENSY_PIN30_IOPORT, TEENSY_PIN30)
+#define LINE_PIN31 PAL_LINE(TEENSY_PIN31_IOPORT, TEENSY_PIN31)
+#define LINE_PIN32 PAL_LINE(TEENSY_PIN32_IOPORT, TEENSY_PIN32)
+#define LINE_PIN33 PAL_LINE(TEENSY_PIN33_IOPORT, TEENSY_PIN33)
 
-#define LINE_LED            LINE_PIN13
+#define LINE_LED LINE_PIN13
 
 #if !defined(_FROM_ASM_)
-#ifdef __cplusplus
+#    ifdef __cplusplus
 extern "C" {
-#endif
-  void boardInit(void);
-#ifdef __cplusplus
+#    endif
+void boardInit(void);
+#    ifdef __cplusplus
 }
-#endif
+#    endif
 #endif /* _FROM_ASM_ */
 
 #endif /* _BOARD_H_ */
diff --git a/drivers/gpio/pca9555.c b/drivers/gpio/pca9555.c
index b0e542d8de..496bbca04e 100644
--- a/drivers/gpio/pca9555.c
+++ b/drivers/gpio/pca9555.c
@@ -22,57 +22,57 @@
 #define TIMEOUT 100
 
 enum {
-  CMD_INPUT_0 = 0,
-  CMD_INPUT_1,
-  CMD_OUTPUT_0,
-  CMD_OUTPUT_1,
-  CMD_INVERSION_0,
-  CMD_INVERSION_1,
-  CMD_CONFIG_0,
-  CMD_CONFIG_1,
+    CMD_INPUT_0 = 0,
+    CMD_INPUT_1,
+    CMD_OUTPUT_0,
+    CMD_OUTPUT_1,
+    CMD_INVERSION_0,
+    CMD_INVERSION_1,
+    CMD_CONFIG_0,
+    CMD_CONFIG_1,
 };
 
 void pca9555_init(uint8_t slave_addr) {
-  static uint8_t s_init = 0;
-  if (!s_init) {
-    i2c_init();
+    static uint8_t s_init = 0;
+    if (!s_init) {
+        i2c_init();
 
-    s_init = 1;
-  }
+        s_init = 1;
+    }
 
-  // TODO: could check device connected
-  // i2c_start(SLAVE_TO_ADDR(slave) | I2C_WRITE);
-  // i2c_stop();
+    // TODO: could check device connected
+    // i2c_start(SLAVE_TO_ADDR(slave) | I2C_WRITE);
+    // i2c_stop();
 }
 
 void pca9555_set_config(uint8_t slave_addr, uint8_t port, uint8_t conf) {
-  uint8_t addr = SLAVE_TO_ADDR(slave_addr);
-  uint8_t cmd  = port ? CMD_CONFIG_1 : CMD_CONFIG_0;
+    uint8_t addr = SLAVE_TO_ADDR(slave_addr);
+    uint8_t cmd  = port ? CMD_CONFIG_1 : CMD_CONFIG_0;
 
-  i2c_status_t ret = i2c_writeReg(addr, cmd, &conf, sizeof(conf), TIMEOUT);
-  if (ret != I2C_STATUS_SUCCESS) {
-    print("pca9555_set_config::FAILED\n");
-  }
+    i2c_status_t ret = i2c_writeReg(addr, cmd, &conf, sizeof(conf), TIMEOUT);
+    if (ret != I2C_STATUS_SUCCESS) {
+        print("pca9555_set_config::FAILED\n");
+    }
 }
 
 void pca9555_set_output(uint8_t slave_addr, uint8_t port, uint8_t conf) {
-  uint8_t addr = SLAVE_TO_ADDR(slave_addr);
-  uint8_t cmd  = port ? CMD_OUTPUT_1 : CMD_OUTPUT_0;
+    uint8_t addr = SLAVE_TO_ADDR(slave_addr);
+    uint8_t cmd  = port ? CMD_OUTPUT_1 : CMD_OUTPUT_0;
 
-  i2c_status_t ret = i2c_writeReg(addr, cmd, &conf, sizeof(conf), TIMEOUT);
-  if (ret != I2C_STATUS_SUCCESS) {
-    print("pca9555_set_output::FAILED\n");
-  }
+    i2c_status_t ret = i2c_writeReg(addr, cmd, &conf, sizeof(conf), TIMEOUT);
+    if (ret != I2C_STATUS_SUCCESS) {
+        print("pca9555_set_output::FAILED\n");
+    }
 }
 
 uint8_t pca9555_readPins(uint8_t slave_addr, uint8_t port) {
-  uint8_t addr = SLAVE_TO_ADDR(slave_addr);
-  uint8_t cmd  = port ? CMD_INPUT_1 : CMD_INPUT_0;
+    uint8_t addr = SLAVE_TO_ADDR(slave_addr);
+    uint8_t cmd  = port ? CMD_INPUT_1 : CMD_INPUT_0;
 
-  uint8_t      data = 0;
-  i2c_status_t ret  = i2c_readReg(addr, cmd, &data, sizeof(data), TIMEOUT);
-  if (ret != I2C_STATUS_SUCCESS) {
-    print("pca9555_readPins::FAILED\n");
-  }
-  return data;
+    uint8_t      data = 0;
+    i2c_status_t ret  = i2c_readReg(addr, cmd, &data, sizeof(data), TIMEOUT);
+    if (ret != I2C_STATUS_SUCCESS) {
+        print("pca9555_readPins::FAILED\n");
+    }
+    return data;
 }
diff --git a/drivers/haptic/DRV2605L.c b/drivers/haptic/DRV2605L.c
index 215e6be3e7..f74c965253 100644
--- a/drivers/haptic/DRV2605L.c
+++ b/drivers/haptic/DRV2605L.c
@@ -20,110 +20,102 @@
 #include <stdio.h>
 #include <math.h>
 
-
 uint8_t DRV2605L_transfer_buffer[2];
 uint8_t DRV2605L_tx_register[0];
 uint8_t DRV2605L_read_buffer[0];
 uint8_t DRV2605L_read_register;
 
-
 void DRV_write(uint8_t drv_register, uint8_t settings) {
-  DRV2605L_transfer_buffer[0] = drv_register;
-  DRV2605L_transfer_buffer[1] = settings;
-  i2c_transmit(DRV2605L_BASE_ADDRESS << 1, DRV2605L_transfer_buffer, 2, 100);
+    DRV2605L_transfer_buffer[0] = drv_register;
+    DRV2605L_transfer_buffer[1] = settings;
+    i2c_transmit(DRV2605L_BASE_ADDRESS << 1, DRV2605L_transfer_buffer, 2, 100);
 }
 
 uint8_t DRV_read(uint8_t regaddress) {
 #ifdef __AVR__
-  i2c_readReg(DRV2605L_BASE_ADDRESS << 1,
-    regaddress, DRV2605L_read_buffer, 1, 100);
-  DRV2605L_read_register = (uint8_t)DRV2605L_read_buffer[0];
+    i2c_readReg(DRV2605L_BASE_ADDRESS << 1, regaddress, DRV2605L_read_buffer, 1, 100);
+    DRV2605L_read_register = (uint8_t)DRV2605L_read_buffer[0];
 #else
-  DRV2605L_tx_register[0] = regaddress;
-  if (MSG_OK != i2c_transmit_receive(DRV2605L_BASE_ADDRESS << 1,
-    DRV2605L_tx_register, 1,
-    DRV2605L_read_buffer, 1
-)){
-    printf("err reading reg \n");
-  }
-  DRV2605L_read_register = (uint8_t)DRV2605L_read_buffer[0];
+    DRV2605L_tx_register[0] = regaddress;
+    if (MSG_OK != i2c_transmit_receive(DRV2605L_BASE_ADDRESS << 1, DRV2605L_tx_register, 1, DRV2605L_read_buffer, 1)) {
+        printf("err reading reg \n");
+    }
+    DRV2605L_read_register = (uint8_t)DRV2605L_read_buffer[0];
 #endif
-return DRV2605L_read_register;
+    return DRV2605L_read_register;
 }
 
-void DRV_init(void)
-{
-  i2c_init();
-  /* 0x07 sets DRV2605 into calibration mode */
-  DRV_write(DRV_MODE,0x07); 
+void DRV_init(void) {
+    i2c_init();
+    /* 0x07 sets DRV2605 into calibration mode */
+    DRV_write(DRV_MODE, 0x07);
+
+    //  DRV_write(DRV_FEEDBACK_CTRL,0xB6);
 
-//  DRV_write(DRV_FEEDBACK_CTRL,0xB6);
-    
-  #if FB_ERM_LRA == 0
+#if FB_ERM_LRA == 0
     /* ERM settings */
-  DRV_write(DRV_RATED_VOLT, (RATED_VOLTAGE/21.33)*1000);
-  #if ERM_OPEN_LOOP == 0
-  DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (((V_PEAK*(DRIVE_TIME+BLANKING_TIME+IDISS_TIME))/0.02133)/(DRIVE_TIME-0.0003))); 
-  #elif ERM_OPEN_LOOP == 1
-  DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (V_PEAK/0.02196));
-  #endif
-  #elif FB_ERM_LRA == 1
-  DRV_write(DRV_RATED_VOLT, ((V_RMS * sqrt(1 - ((4 * ((150+(SAMPLE_TIME*50))*0.000001)) + 0.0003)* F_LRA)/0.02071)));
-  #if LRA_OPEN_LOOP == 0
-    DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, ((V_PEAK/sqrt(1-(F_LRA*0.0008))/0.02133)));
-  #elif LRA_OPEN_LOOP == 1
-    DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (V_PEAK/0.02196));
-  #endif
-  #endif
-      
-  DRVREG_FBR FB_SET;
-    FB_SET.Bits.ERM_LRA = FB_ERM_LRA;
+    DRV_write(DRV_RATED_VOLT, (RATED_VOLTAGE / 21.33) * 1000);
+#    if ERM_OPEN_LOOP == 0
+    DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (((V_PEAK * (DRIVE_TIME + BLANKING_TIME + IDISS_TIME)) / 0.02133) / (DRIVE_TIME - 0.0003)));
+#    elif ERM_OPEN_LOOP == 1
+    DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (V_PEAK / 0.02196));
+#    endif
+#elif FB_ERM_LRA == 1
+    DRV_write(DRV_RATED_VOLT, ((V_RMS * sqrt(1 - ((4 * ((150 + (SAMPLE_TIME * 50)) * 0.000001)) + 0.0003) * F_LRA) / 0.02071)));
+#    if LRA_OPEN_LOOP == 0
+    DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, ((V_PEAK / sqrt(1 - (F_LRA * 0.0008)) / 0.02133)));
+#    elif LRA_OPEN_LOOP == 1
+    DRV_write(DRV_OVERDRIVE_CLAMP_VOLT, (V_PEAK / 0.02196));
+#    endif
+#endif
+
+    DRVREG_FBR FB_SET;
+    FB_SET.Bits.ERM_LRA      = FB_ERM_LRA;
     FB_SET.Bits.BRAKE_FACTOR = FB_BRAKEFACTOR;
-    FB_SET.Bits.LOOP_GAIN =FB_LOOPGAIN;
-    FB_SET.Bits.BEMF_GAIN = 0; /* auto-calibration populates this field*/
-    DRV_write(DRV_FEEDBACK_CTRL, (uint8_t) FB_SET.Byte);
-  DRVREG_CTRL1 C1_SET;
-    C1_SET.Bits.C1_DRIVE_TIME = DRIVE_TIME;
-    C1_SET.Bits.C1_AC_COUPLE = AC_COUPLE;
+    FB_SET.Bits.LOOP_GAIN    = FB_LOOPGAIN;
+    FB_SET.Bits.BEMF_GAIN    = 0; /* auto-calibration populates this field*/
+    DRV_write(DRV_FEEDBACK_CTRL, (uint8_t)FB_SET.Byte);
+    DRVREG_CTRL1 C1_SET;
+    C1_SET.Bits.C1_DRIVE_TIME    = DRIVE_TIME;
+    C1_SET.Bits.C1_AC_COUPLE     = AC_COUPLE;
     C1_SET.Bits.C1_STARTUP_BOOST = STARTUP_BOOST;
-    DRV_write(DRV_CTRL_1, (uint8_t) C1_SET.Byte);
-  DRVREG_CTRL2 C2_SET;
-    C2_SET.Bits.C2_BIDIR_INPUT = BIDIR_INPUT;
-    C2_SET.Bits.C2_BRAKE_STAB = BRAKE_STAB;
-    C2_SET.Bits.C2_SAMPLE_TIME = SAMPLE_TIME;
+    DRV_write(DRV_CTRL_1, (uint8_t)C1_SET.Byte);
+    DRVREG_CTRL2 C2_SET;
+    C2_SET.Bits.C2_BIDIR_INPUT   = BIDIR_INPUT;
+    C2_SET.Bits.C2_BRAKE_STAB    = BRAKE_STAB;
+    C2_SET.Bits.C2_SAMPLE_TIME   = SAMPLE_TIME;
     C2_SET.Bits.C2_BLANKING_TIME = BLANKING_TIME;
-    C2_SET.Bits.C2_IDISS_TIME = IDISS_TIME;
-    DRV_write(DRV_CTRL_2, (uint8_t) C2_SET.Byte);
-  DRVREG_CTRL3 C3_SET;
-    C3_SET.Bits.C3_LRA_OPEN_LOOP = LRA_OPEN_LOOP;
-    C3_SET.Bits.C3_N_PWM_ANALOG = N_PWM_ANALOG;
-    C3_SET.Bits.C3_LRA_DRIVE_MODE = LRA_DRIVE_MODE;
+    C2_SET.Bits.C2_IDISS_TIME    = IDISS_TIME;
+    DRV_write(DRV_CTRL_2, (uint8_t)C2_SET.Byte);
+    DRVREG_CTRL3 C3_SET;
+    C3_SET.Bits.C3_LRA_OPEN_LOOP   = LRA_OPEN_LOOP;
+    C3_SET.Bits.C3_N_PWM_ANALOG    = N_PWM_ANALOG;
+    C3_SET.Bits.C3_LRA_DRIVE_MODE  = LRA_DRIVE_MODE;
     C3_SET.Bits.C3_DATA_FORMAT_RTO = DATA_FORMAT_RTO;
     C3_SET.Bits.C3_SUPPLY_COMP_DIS = SUPPLY_COMP_DIS;
-    C3_SET.Bits.C3_ERM_OPEN_LOOP = ERM_OPEN_LOOP;
-    C3_SET.Bits.C3_NG_THRESH = NG_THRESH;
-    DRV_write(DRV_CTRL_3, (uint8_t) C3_SET.Byte);
-  DRVREG_CTRL4 C4_SET;
-    C4_SET.Bits.C4_ZC_DET_TIME = ZC_DET_TIME;
+    C3_SET.Bits.C3_ERM_OPEN_LOOP   = ERM_OPEN_LOOP;
+    C3_SET.Bits.C3_NG_THRESH       = NG_THRESH;
+    DRV_write(DRV_CTRL_3, (uint8_t)C3_SET.Byte);
+    DRVREG_CTRL4 C4_SET;
+    C4_SET.Bits.C4_ZC_DET_TIME   = ZC_DET_TIME;
     C4_SET.Bits.C4_AUTO_CAL_TIME = AUTO_CAL_TIME;
-    DRV_write(DRV_CTRL_4, (uint8_t) C4_SET.Byte);
-  DRV_write(DRV_LIB_SELECTION,LIB_SELECTION);
+    DRV_write(DRV_CTRL_4, (uint8_t)C4_SET.Byte);
+    DRV_write(DRV_LIB_SELECTION, LIB_SELECTION);
 
-  DRV_write(DRV_GO, 0x01);
+    DRV_write(DRV_GO, 0x01);
 
-  /* 0x00 sets DRV2605 out of standby and to use internal trigger
-   * 0x01 sets DRV2605 out of standby and to use external trigger */
-  DRV_write(DRV_MODE,0x00); 
+    /* 0x00 sets DRV2605 out of standby and to use internal trigger
+     * 0x01 sets DRV2605 out of standby and to use external trigger */
+    DRV_write(DRV_MODE, 0x00);
 
-//Play greeting sequence
-  DRV_write(DRV_GO, 0x00);
-  DRV_write(DRV_WAVEFORM_SEQ_1, DRV_GREETING);
-  DRV_write(DRV_GO, 0x01);
+    // Play greeting sequence
+    DRV_write(DRV_GO, 0x00);
+    DRV_write(DRV_WAVEFORM_SEQ_1, DRV_GREETING);
+    DRV_write(DRV_GO, 0x01);
 }
 
-void DRV_pulse(uint8_t sequence)
-{
-  DRV_write(DRV_GO, 0x00);
-  DRV_write(DRV_WAVEFORM_SEQ_1, sequence);
-  DRV_write(DRV_GO, 0x01);
+void DRV_pulse(uint8_t sequence) {
+    DRV_write(DRV_GO, 0x00);
+    DRV_write(DRV_WAVEFORM_SEQ_1, sequence);
+    DRV_write(DRV_GO, 0x01);
 }
 \ No newline at end of file
diff --git a/drivers/haptic/DRV2605L.h b/drivers/haptic/DRV2605L.h
index 836e9cbcd2..f550b859f7 100644
--- a/drivers/haptic/DRV2605L.h
+++ b/drivers/haptic/DRV2605L.h
@@ -22,383 +22,383 @@
 
  * Feedback Control Settings */
 #ifndef FB_ERM_LRA
-#define FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/
+#    define FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/
 #endif
 #ifndef FB_BRAKEFACTOR
-#define FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
+#    define FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
 #endif
 #ifndef FB_LOOPGAIN
-#define FB_LOOPGAIN 1 /* For  Low:0, Medium:1, High:2, Very High:3 */
+#    define FB_LOOPGAIN 1 /* For  Low:0, Medium:1, High:2, Very High:3 */
 #endif
 
 /* LRA specific settings */
 #if FB_ERM_LRA == 1
-#ifndef V_RMS
-#define V_RMS 2.0
-#endif
-#ifndef V_PEAK
-#define V_PEAK 2.1
-#endif
-#ifndef F_LRA
-#define F_LRA 205
-#endif
-#ifndef RATED_VOLTAGE
-#define RATED_VOLTAGE 2 /* 2v as safe range in case device voltage is not set */
-#endif
+#    ifndef V_RMS
+#        define V_RMS 2.0
+#    endif
+#    ifndef V_PEAK
+#        define V_PEAK 2.1
+#    endif
+#    ifndef F_LRA
+#        define F_LRA 205
+#    endif
+#    ifndef RATED_VOLTAGE
+#        define RATED_VOLTAGE 2 /* 2v as safe range in case device voltage is not set */
+#    endif
 #endif
 
 #ifndef RATED_VOLTAGE
-#define RATED_VOLTAGE 2 /* 2v as safe range in case device voltage is not set */
+#    define RATED_VOLTAGE 2 /* 2v as safe range in case device voltage is not set */
 #endif
 #ifndef V_PEAK
-#define V_PEAK 2.8
+#    define V_PEAK 2.8
 #endif
 
 /* Library Selection */
 #ifndef LIB_SELECTION
-#if FB_ERM_LRA == 1
-#define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
-#else
-#define LIB_SELECTION 1
-#endif
+#    if FB_ERM_LRA == 1
+#        define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */
+#    else
+#        define LIB_SELECTION 1
+#    endif
 #endif
 
 #ifndef DRV_GREETING
-#define DRV_GREETING alert_750ms
+#    define DRV_GREETING alert_750ms
 #endif
 #ifndef DRV_MODE_DEFAULT
-#define DRV_MODE_DEFAULT strong_click1
+#    define DRV_MODE_DEFAULT strong_click1
 #endif
 
 /* Control 1 register settings */
 #ifndef DRIVE_TIME
-#define DRIVE_TIME 25
+#    define DRIVE_TIME 25
 #endif
 #ifndef AC_COUPLE
-#define AC_COUPLE 0
+#    define AC_COUPLE 0
 #endif
 #ifndef STARTUP_BOOST
-#define STARTUP_BOOST 1
+#    define STARTUP_BOOST 1
 #endif
 
 /* Control 2 Settings */
 #ifndef BIDIR_INPUT
-#define BIDIR_INPUT 1
+#    define BIDIR_INPUT 1
 #endif
 #ifndef BRAKE_STAB
-#define BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */
+#    define BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */
 #endif
-#ifndef SAMPLE_TIME 
-#define SAMPLE_TIME 3
+#ifndef SAMPLE_TIME
+#    define SAMPLE_TIME 3
 #endif
 #ifndef BLANKING_TIME
-#define BLANKING_TIME 1
+#    define BLANKING_TIME 1
 #endif
 #ifndef IDISS_TIME
-#define IDISS_TIME 1
+#    define IDISS_TIME 1
 #endif
 
 /* Control 3 settings */
 #ifndef NG_THRESH
-#define NG_THRESH 2
+#    define NG_THRESH 2
 #endif
 #ifndef ERM_OPEN_LOOP
-#define ERM_OPEN_LOOP 1
+#    define ERM_OPEN_LOOP 1
 #endif
 #ifndef SUPPLY_COMP_DIS
-#define SUPPLY_COMP_DIS 0
+#    define SUPPLY_COMP_DIS 0
 #endif
 #ifndef DATA_FORMAT_RTO
-#define DATA_FORMAT_RTO 0
+#    define DATA_FORMAT_RTO 0
 #endif
 #ifndef LRA_DRIVE_MODE
-#define LRA_DRIVE_MODE 0
+#    define LRA_DRIVE_MODE 0
 #endif
 #ifndef N_PWM_ANALOG
-#define N_PWM_ANALOG 0
+#    define N_PWM_ANALOG 0
 #endif
 #ifndef LRA_OPEN_LOOP
-#define LRA_OPEN_LOOP 0
+#    define LRA_OPEN_LOOP 0
 #endif
 
 /* Control 4 settings */
 #ifndef ZC_DET_TIME
-#define ZC_DET_TIME 0
+#    define ZC_DET_TIME 0
 #endif
 #ifndef AUTO_CAL_TIME
-#define AUTO_CAL_TIME 3
+#    define AUTO_CAL_TIME 3
 #endif
 
 /* register defines -------------------------------------------------------- */
-#define DRV2605L_BASE_ADDRESS       0x5A		/* DRV2605L Base address */
-#define DRV_STATUS                  0x00
-#define DRV_MODE                    0x01
-#define DRV_RTP_INPUT               0x02
-#define DRV_LIB_SELECTION           0x03
-#define DRV_WAVEFORM_SEQ_1          0x04
-#define DRV_WAVEFORM_SEQ_2          0x05
-#define DRV_WAVEFORM_SEQ_3          0x06
-#define DRV_WAVEFORM_SEQ_4          0x07
-#define DRV_WAVEFORM_SEQ_5          0x08
-#define DRV_WAVEFORM_SEQ_6          0x09
-#define DRV_WAVEFORM_SEQ_7          0x0A
-#define DRV_WAVEFORM_SEQ_8          0x0B
-#define DRV_GO                      0x0C
-#define DRV_OVERDRIVE_TIME_OFFSET   0x0D
-#define DRV_SUSTAIN_TIME_OFFSET_P   0x0E
-#define DRV_SUSTAIN_TIME_OFFSET_N   0x0F
-#define DRV_BRAKE_TIME_OFFSET       0x10
-#define DRV_AUDIO_2_VIBE_CTRL       0x11
-#define DRV_AUDIO_2_VIBE_MIN_IN     0x12
-#define DRV_AUDIO_2_VIBE_MAX_IN     0x13
-#define DRV_AUDIO_2_VIBE_MIN_OUTDRV	0x14
-#define DRV_AUDIO_2_VIBE_MAX_OUTDRV	0x15
-#define DRV_RATED_VOLT              0x16
-#define DRV_OVERDRIVE_CLAMP_VOLT    0x17
-#define DRV_AUTO_CALIB_COMP_RESULT  0x18 
-#define DRV_AUTO_CALIB_BEMF_RESULT  0x19
-#define DRV_FEEDBACK_CTRL           0x1A
-#define DRV_CTRL_1                  0x1B
-#define DRV_CTRL_2                  0x1C
-#define DRV_CTRL_3                  0x1D
-#define DRV_CTRL_4                  0x1E
-#define DRV_CTRL_5                  0x1F
-#define DRV_OPEN_LOOP_PERIOD        0x20
-#define DRV_VBAT_VOLT_MONITOR       0x21
-#define DRV_LRA_RESONANCE_PERIOD    0x22
+#define DRV2605L_BASE_ADDRESS 0x5A /* DRV2605L Base address */
+#define DRV_STATUS 0x00
+#define DRV_MODE 0x01
+#define DRV_RTP_INPUT 0x02
+#define DRV_LIB_SELECTION 0x03
+#define DRV_WAVEFORM_SEQ_1 0x04
+#define DRV_WAVEFORM_SEQ_2 0x05
+#define DRV_WAVEFORM_SEQ_3 0x06
+#define DRV_WAVEFORM_SEQ_4 0x07
+#define DRV_WAVEFORM_SEQ_5 0x08
+#define DRV_WAVEFORM_SEQ_6 0x09
+#define DRV_WAVEFORM_SEQ_7 0x0A
+#define DRV_WAVEFORM_SEQ_8 0x0B
+#define DRV_GO 0x0C
+#define DRV_OVERDRIVE_TIME_OFFSET 0x0D
+#define DRV_SUSTAIN_TIME_OFFSET_P 0x0E
+#define DRV_SUSTAIN_TIME_OFFSET_N 0x0F
+#define DRV_BRAKE_TIME_OFFSET 0x10
+#define DRV_AUDIO_2_VIBE_CTRL 0x11
+#define DRV_AUDIO_2_VIBE_MIN_IN 0x12
+#define DRV_AUDIO_2_VIBE_MAX_IN 0x13
+#define DRV_AUDIO_2_VIBE_MIN_OUTDRV 0x14
+#define DRV_AUDIO_2_VIBE_MAX_OUTDRV 0x15
+#define DRV_RATED_VOLT 0x16
+#define DRV_OVERDRIVE_CLAMP_VOLT 0x17
+#define DRV_AUTO_CALIB_COMP_RESULT 0x18
+#define DRV_AUTO_CALIB_BEMF_RESULT 0x19
+#define DRV_FEEDBACK_CTRL 0x1A
+#define DRV_CTRL_1 0x1B
+#define DRV_CTRL_2 0x1C
+#define DRV_CTRL_3 0x1D
+#define DRV_CTRL_4 0x1E
+#define DRV_CTRL_5 0x1F
+#define DRV_OPEN_LOOP_PERIOD 0x20
+#define DRV_VBAT_VOLT_MONITOR 0x21
+#define DRV_LRA_RESONANCE_PERIOD 0x22
 
-void DRV_init(void);
-void DRV_write(const uint8_t drv_register, const uint8_t settings);
+void    DRV_init(void);
+void    DRV_write(const uint8_t drv_register, const uint8_t settings);
 uint8_t DRV_read(const uint8_t regaddress);
-void DRV_pulse(const uint8_t sequence);
+void    DRV_pulse(const uint8_t sequence);
 
-typedef enum DRV_EFFECT{
-  clear_sequence      = 0,
-  strong_click 		    = 1,
-  strong_click_60 		= 2,
-  strong_click_30 		= 3,
-  sharp_click 		    = 4,
-  sharp_click_60      = 5,
-  sharp_click_30      = 6,
-  soft_bump           = 7,
-  soft_bump_60        = 8,
-  soft_bump_30        = 9,
-  dbl_click           = 10,
-  dbl_click_60        = 11,
-  trp_click           = 12,
-  soft_fuzz           = 13,
-  strong_buzz         = 14,
-  alert_750ms         = 15,
-  alert_1000ms        = 16,
-  strong_click1       = 17,
-  strong_click2_80    = 18,
-  strong_click3_60    = 19,
-  strong_click4_30    = 20,
-  medium_click1       = 21,
-  medium_click2_80    = 22,
-  medium_click3_60    = 23,
-  sharp_tick1         = 24,
-  sharp_tick2_80      = 25,
-  sharp_tick3_60      = 26,
-  sh_dblclick_str     = 27,
-  sh_dblclick_str_80  = 28,
-  sh_dblclick_str_60  = 29,
-  sh_dblclick_str_30  = 30,
-  sh_dblclick_med     = 31,
-  sh_dblclick_med_80  = 32,
-  sh_dblclick_med_60  = 33,
-  sh_dblsharp_tick    = 34,
-  sh_dblsharp_tick_80 = 35,
-  sh_dblsharp_tick_60 = 36,
-  lg_dblclick_str     = 37,
-  lg_dblclick_str_80  = 38,
-  lg_dblclick_str_60  = 39,
-  lg_dblclick_str_30  = 40,
-  lg_dblclick_med     = 41,
-  lg_dblclick_med_80  = 42,
-  lg_dblclick_med_60  = 43,
-  lg_dblsharp_tick    = 44,
-  lg_dblsharp_tick_80 = 45,
-  lg_dblsharp_tick_60 = 46,
-  buzz 					= 47,
-  buzz_80				= 48,
-  buzz_60				= 49,
-  buzz_40				= 50,
-  buzz_20				= 51,
-  pulsing_strong      = 52,
-  pulsing_strong_80   = 53,
-  pulsing_medium      = 54,
-  pulsing_medium_80   = 55,
-  pulsing_sharp       = 56,
-  pulsing_sharp_80    = 57,
-  transition_click		= 58,
-  transition_click_80 = 59,
-  transition_click_60	= 60,
-  transition_click_40	= 61,
-  transition_click_20	= 62,
-  transition_click_10	= 63,
-  transition_hum      = 64,
-  transition_hum_80   = 65,
-  transition_hum_60   = 66,
-  transition_hum_40   = 67,
-  transition_hum_20   = 68,
-  transition_hum_10   = 69,
-  transition_rampdown_long_smooth1  = 70,
-  transition_rampdown_long_smooth2  = 71,
-  transition_rampdown_med_smooth1   = 72,
-  transition_rampdown_med_smooth2   = 73,
-  transition_rampdown_short_smooth1 = 74,
-  transition_rampdown_short_smooth2 = 75,
-  transition_rampdown_long_sharp1   = 76,
-  transition_rampdown_long_sharp2   = 77,
-  transition_rampdown_med_sharp1    = 78,
-  transition_rampdown_med_sharp2    = 79,
-  transition_rampdown_short_sharp1  = 80,
-  transition_rampdown_short_sharp2  = 81,
-  transition_rampup_long_smooth1    = 82,
-  transition_rampup_long_smooth2    = 83,
-  transition_rampup_med_smooth1     = 84,
-  transition_rampup_med_smooth2     = 85,
-  transition_rampup_short_smooth1   = 86,
-  transition_rampup_short_smooth2   = 87,
-  transition_rampup_long_sharp1     = 88,
-  transition_rampup_long_sharp2     = 89,
-  transition_rampup_med_sharp1      = 90,
-  transition_rampup_med_sharp2      = 91,
-  transition_rampup_short_sharp1    = 92,
-  transition_rampup_short_sharp2    = 93,
-  transition_rampdown_long_smooth1_50  = 94,
-  transition_rampdown_long_smooth2_50  = 95,
-  transition_rampdown_med_smooth1_50   = 96,
-  transition_rampdown_med_smooth2_50   = 97,
-  transition_rampdown_short_smooth1_50 = 98,
-  transition_rampdown_short_smooth2_50 = 99,
-  transition_rampdown_long_sharp1_50   = 100,
-  transition_rampdown_long_sharp2_50   = 101,
-  transition_rampdown_med_sharp1_50    = 102,
-  transition_rampdown_med_sharp2_50    = 103,
-  transition_rampdown_short_sharp1_50  = 104,
-  transition_rampdown_short_sharp2_50  = 105,
-  transition_rampup_long_smooth1_50    = 106,
-  transition_rampup_long_smooth2_50    = 107,
-  transition_rampup_med_smooth1_50     = 108,
-  transition_rampup_med_smooth2_50     = 109,
-  transition_rampup_short_smooth1_50   = 110,
-  transition_rampup_short_smooth2_50   = 111,
-  transition_rampup_long_sharp1_50     = 112,
-  transition_rampup_long_sharp2_50     = 113,
-  transition_rampup_med_sharp1_50      = 114,
-  transition_rampup_med_sharp2_50      = 115,
-  transition_rampup_short_sharp1_50    = 116,
-  transition_rampup_short_sharp2_50    = 117,
-  long_buzz_for_programmatic_stopping  = 118,
-  smooth_hum1_50 = 119,
-  smooth_hum2_40 = 120,
-  smooth_hum3_30 = 121,
-  smooth_hum4_20 = 122,
-  smooth_hum5_10 = 123,
-  drv_effect_max = 124,
+typedef enum DRV_EFFECT {
+    clear_sequence                       = 0,
+    strong_click                         = 1,
+    strong_click_60                      = 2,
+    strong_click_30                      = 3,
+    sharp_click                          = 4,
+    sharp_click_60                       = 5,
+    sharp_click_30                       = 6,
+    soft_bump                            = 7,
+    soft_bump_60                         = 8,
+    soft_bump_30                         = 9,
+    dbl_click                            = 10,
+    dbl_click_60                         = 11,
+    trp_click                            = 12,
+    soft_fuzz                            = 13,
+    strong_buzz                          = 14,
+    alert_750ms                          = 15,
+    alert_1000ms                         = 16,
+    strong_click1                        = 17,
+    strong_click2_80                     = 18,
+    strong_click3_60                     = 19,
+    strong_click4_30                     = 20,
+    medium_click1                        = 21,
+    medium_click2_80                     = 22,
+    medium_click3_60                     = 23,
+    sharp_tick1                          = 24,
+    sharp_tick2_80                       = 25,
+    sharp_tick3_60                       = 26,
+    sh_dblclick_str                      = 27,
+    sh_dblclick_str_80                   = 28,
+    sh_dblclick_str_60                   = 29,
+    sh_dblclick_str_30                   = 30,
+    sh_dblclick_med                      = 31,
+    sh_dblclick_med_80                   = 32,
+    sh_dblclick_med_60                   = 33,
+    sh_dblsharp_tick                     = 34,
+    sh_dblsharp_tick_80                  = 35,
+    sh_dblsharp_tick_60                  = 36,
+    lg_dblclick_str                      = 37,
+    lg_dblclick_str_80                   = 38,
+    lg_dblclick_str_60                   = 39,
+    lg_dblclick_str_30                   = 40,
+    lg_dblclick_med                      = 41,
+    lg_dblclick_med_80                   = 42,
+    lg_dblclick_med_60                   = 43,
+    lg_dblsharp_tick                     = 44,
+    lg_dblsharp_tick_80                  = 45,
+    lg_dblsharp_tick_60                  = 46,
+    buzz                                 = 47,
+    buzz_80                              = 48,
+    buzz_60                              = 49,
+    buzz_40                              = 50,
+    buzz_20                              = 51,
+    pulsing_strong                       = 52,
+    pulsing_strong_80                    = 53,
+    pulsing_medium                       = 54,
+    pulsing_medium_80                    = 55,
+    pulsing_sharp                        = 56,
+    pulsing_sharp_80                     = 57,
+    transition_click                     = 58,
+    transition_click_80                  = 59,
+    transition_click_60                  = 60,
+    transition_click_40                  = 61,
+    transition_click_20                  = 62,
+    transition_click_10                  = 63,
+    transition_hum                       = 64,
+    transition_hum_80                    = 65,
+    transition_hum_60                    = 66,
+    transition_hum_40                    = 67,
+    transition_hum_20                    = 68,
+    transition_hum_10                    = 69,
+    transition_rampdown_long_smooth1     = 70,
+    transition_rampdown_long_smooth2     = 71,
+    transition_rampdown_med_smooth1      = 72,
+    transition_rampdown_med_smooth2      = 73,
+    transition_rampdown_short_smooth1    = 74,
+    transition_rampdown_short_smooth2    = 75,
+    transition_rampdown_long_sharp1      = 76,
+    transition_rampdown_long_sharp2      = 77,
+    transition_rampdown_med_sharp1       = 78,
+    transition_rampdown_med_sharp2       = 79,
+    transition_rampdown_short_sharp1     = 80,
+    transition_rampdown_short_sharp2     = 81,
+    transition_rampup_long_smooth1       = 82,
+    transition_rampup_long_smooth2       = 83,
+    transition_rampup_med_smooth1        = 84,
+    transition_rampup_med_smooth2        = 85,
+    transition_rampup_short_smooth1      = 86,
+    transition_rampup_short_smooth2      = 87,
+    transition_rampup_long_sharp1        = 88,
+    transition_rampup_long_sharp2        = 89,
+    transition_rampup_med_sharp1         = 90,
+    transition_rampup_med_sharp2         = 91,
+    transition_rampup_short_sharp1       = 92,
+    transition_rampup_short_sharp2       = 93,
+    transition_rampdown_long_smooth1_50  = 94,
+    transition_rampdown_long_smooth2_50  = 95,
+    transition_rampdown_med_smooth1_50   = 96,
+    transition_rampdown_med_smooth2_50   = 97,
+    transition_rampdown_short_smooth1_50 = 98,
+    transition_rampdown_short_smooth2_50 = 99,
+    transition_rampdown_long_sharp1_50   = 100,
+    transition_rampdown_long_sharp2_50   = 101,
+    transition_rampdown_med_sharp1_50    = 102,
+    transition_rampdown_med_sharp2_50    = 103,
+    transition_rampdown_short_sharp1_50  = 104,
+    transition_rampdown_short_sharp2_50  = 105,
+    transition_rampup_long_smooth1_50    = 106,
+    transition_rampup_long_smooth2_50    = 107,
+    transition_rampup_med_smooth1_50     = 108,
+    transition_rampup_med_smooth2_50     = 109,
+    transition_rampup_short_smooth1_50   = 110,
+    transition_rampup_short_smooth2_50   = 111,
+    transition_rampup_long_sharp1_50     = 112,
+    transition_rampup_long_sharp2_50     = 113,
+    transition_rampup_med_sharp1_50      = 114,
+    transition_rampup_med_sharp2_50      = 115,
+    transition_rampup_short_sharp1_50    = 116,
+    transition_rampup_short_sharp2_50    = 117,
+    long_buzz_for_programmatic_stopping  = 118,
+    smooth_hum1_50                       = 119,
+    smooth_hum2_40                       = 120,
+    smooth_hum3_30                       = 121,
+    smooth_hum4_20                       = 122,
+    smooth_hum5_10                       = 123,
+    drv_effect_max                       = 124,
 } DRV_EFFECT;
 
 /* Register bit array unions */
 
 typedef union DRVREG_STATUS { /* register 0x00 */
-  uint8_t Byte;
-  struct {
-    uint8_t OC_DETECT   :1; /* set to 1 when overcurrent event is detected */
-    uint8_t OVER_TEMP   :1; /* set to 1 when device exceeds temp threshold */
-    uint8_t FB_STS      :1; /* set to 1 when feedback controller has timed out */
-    /* auto-calibration routine and diagnostic result
-     * result  |  auto-calibation  |      diagnostic       |
-     *   0     |      passed       | actuator func normal  |
-     *   1     |      failed       | actuator func fault*  |
-     * * actuator is not present or is shorted, timing out, or giving out–of-range back-EMF */
-    uint8_t DIAG_RESULT :1;
-    uint8_t             :1;
-    uint8_t DEVICE_ID   :3; /* Device IDs 3: DRV2605  4: DRV2604  5: DRV2604L  6: DRV2605L */
-  } Bits;
+    uint8_t Byte;
+    struct {
+        uint8_t OC_DETECT : 1; /* set to 1 when overcurrent event is detected */
+        uint8_t OVER_TEMP : 1; /* set to 1 when device exceeds temp threshold */
+        uint8_t FB_STS : 1;    /* set to 1 when feedback controller has timed out */
+        /* auto-calibration routine and diagnostic result
+         * result  |  auto-calibation  |      diagnostic       |
+         *   0     |      passed       | actuator func normal  |
+         *   1     |      failed       | actuator func fault*  |
+         * * actuator is not present or is shorted, timing out, or giving out–of-range back-EMF */
+        uint8_t DIAG_RESULT : 1;
+        uint8_t : 1;
+        uint8_t DEVICE_ID : 3; /* Device IDs 3: DRV2605  4: DRV2604  5: DRV2604L  6: DRV2605L */
+    } Bits;
 } DRVREG_STATUS;
 
 typedef union DRVREG_MODE { /* register 0x01 */
-  uint8_t Byte;
-  struct {
-    uint8_t MODE        :3; /* Mode setting */
-    uint8_t             :3;
-    uint8_t STANDBY     :1; /* 0:standby 1:ready */
-  } Bits;
+    uint8_t Byte;
+    struct {
+        uint8_t MODE : 3; /* Mode setting */
+        uint8_t : 3;
+        uint8_t STANDBY : 1; /* 0:standby 1:ready */
+    } Bits;
 } DRVREG_MODE;
 
 typedef union DRVREG_WAIT {
-  uint8_t Byte;
-  struct {
-    uint8_t WAIT_MODE   :1; /* Set to 1 to interpret as wait for next 7 bits x10ms */
-    uint8_t WAIT_TIME   :7;
-  } Bits;
+    uint8_t Byte;
+    struct {
+        uint8_t WAIT_MODE : 1; /* Set to 1 to interpret as wait for next 7 bits x10ms */
+        uint8_t WAIT_TIME : 7;
+    } Bits;
 } DRVREG_WAIT;
 
-typedef union DRVREG_FBR{ /* register 0x1A */
-  uint8_t Byte;
-  struct {
-    uint8_t BEMF_GAIN    :2;
-    uint8_t LOOP_GAIN    :2;
-    uint8_t BRAKE_FACTOR :3;
-    uint8_t ERM_LRA      :1;
-  } Bits;
+typedef union DRVREG_FBR { /* register 0x1A */
+    uint8_t Byte;
+    struct {
+        uint8_t BEMF_GAIN : 2;
+        uint8_t LOOP_GAIN : 2;
+        uint8_t BRAKE_FACTOR : 3;
+        uint8_t ERM_LRA : 1;
+    } Bits;
 } DRVREG_FBR;
 
-typedef union DRVREG_CTRL1{ /* register 0x1B */
-  uint8_t Byte;
-  struct {
-    uint8_t C1_DRIVE_TIME    :5;
-    uint8_t C1_AC_COUPLE     :1;
-    uint8_t                  :1;
-    uint8_t C1_STARTUP_BOOST :1;
-  } Bits;
+typedef union DRVREG_CTRL1 { /* register 0x1B */
+    uint8_t Byte;
+    struct {
+        uint8_t C1_DRIVE_TIME : 5;
+        uint8_t C1_AC_COUPLE : 1;
+        uint8_t : 1;
+        uint8_t C1_STARTUP_BOOST : 1;
+    } Bits;
 } DRVREG_CTRL1;
 
-typedef union DRVREG_CTRL2{ /* register 0x1C */
-  uint8_t Byte;
-  struct {
-    uint8_t C2_IDISS_TIME    :2;
-    uint8_t C2_BLANKING_TIME :2;
-    uint8_t C2_SAMPLE_TIME   :2;
-    uint8_t C2_BRAKE_STAB    :1;
-    uint8_t C2_BIDIR_INPUT   :1;
-  } Bits;
+typedef union DRVREG_CTRL2 { /* register 0x1C */
+    uint8_t Byte;
+    struct {
+        uint8_t C2_IDISS_TIME : 2;
+        uint8_t C2_BLANKING_TIME : 2;
+        uint8_t C2_SAMPLE_TIME : 2;
+        uint8_t C2_BRAKE_STAB : 1;
+        uint8_t C2_BIDIR_INPUT : 1;
+    } Bits;
 } DRVREG_CTRL2;
 
-typedef union DRVREG_CTRL3{ /* register 0x1D */
-  uint8_t Byte;
-  struct {
-    uint8_t C3_LRA_OPEN_LOOP   :1;
-    uint8_t C3_N_PWM_ANALOG    :1;
-    uint8_t C3_LRA_DRIVE_MODE  :1;
-    uint8_t C3_DATA_FORMAT_RTO :1;
-    uint8_t C3_SUPPLY_COMP_DIS :1;
-    uint8_t C3_ERM_OPEN_LOOP   :1;
-    uint8_t C3_NG_THRESH       :2;
-  } Bits;
+typedef union DRVREG_CTRL3 { /* register 0x1D */
+    uint8_t Byte;
+    struct {
+        uint8_t C3_LRA_OPEN_LOOP : 1;
+        uint8_t C3_N_PWM_ANALOG : 1;
+        uint8_t C3_LRA_DRIVE_MODE : 1;
+        uint8_t C3_DATA_FORMAT_RTO : 1;
+        uint8_t C3_SUPPLY_COMP_DIS : 1;
+        uint8_t C3_ERM_OPEN_LOOP : 1;
+        uint8_t C3_NG_THRESH : 2;
+    } Bits;
 } DRVREG_CTRL3;
 
-typedef union DRVREG_CTRL4{ /* register 0x1E */
-  uint8_t Byte;
-  struct {
-    uint8_t C4_OTP_PROGRAM     :1;
-    uint8_t                    :1;
-    uint8_t C4_OTP_STATUS      :1;
-    uint8_t                    :1;
-    uint8_t C4_AUTO_CAL_TIME   :2;
-    uint8_t C4_ZC_DET_TIME     :2;
-  } Bits;
+typedef union DRVREG_CTRL4 { /* register 0x1E */
+    uint8_t Byte;
+    struct {
+        uint8_t C4_OTP_PROGRAM : 1;
+        uint8_t : 1;
+        uint8_t C4_OTP_STATUS : 1;
+        uint8_t : 1;
+        uint8_t C4_AUTO_CAL_TIME : 2;
+        uint8_t C4_ZC_DET_TIME : 2;
+    } Bits;
 } DRVREG_CTRL4;
 
-typedef union DRVREG_CTRL5{ /* register 0x1F */
-  uint8_t Byte;
-  struct {
-    uint8_t C5_IDISS_TIME         :2;
-    uint8_t C5_BLANKING_TIME      :2;
-    uint8_t C5_PLAYBACK_INTERVAL  :1;
-    uint8_t C5_LRA_AUTO_OPEN_LOOP :1;
-    uint8_t C5_AUTO_OL_CNT        :2;
-  } Bits;
+typedef union DRVREG_CTRL5 { /* register 0x1F */
+    uint8_t Byte;
+    struct {
+        uint8_t C5_IDISS_TIME : 2;
+        uint8_t C5_BLANKING_TIME : 2;
+        uint8_t C5_PLAYBACK_INTERVAL : 1;
+        uint8_t C5_LRA_AUTO_OPEN_LOOP : 1;
+        uint8_t C5_AUTO_OL_CNT : 2;
+    } Bits;
 } DRVREG_CTRL5;
 \ No newline at end of file
diff --git a/drivers/haptic/haptic.c b/drivers/haptic/haptic.c
index a94f05565c..ded6d8a44a 100644
--- a/drivers/haptic/haptic.c
+++ b/drivers/haptic/haptic.c
@@ -19,230 +19,248 @@
 #include "progmem.h"
 #include "debug.h"
 #ifdef DRV2605L
-#include "DRV2605L.h"
+#    include "DRV2605L.h"
 #endif
 #ifdef SOLENOID_ENABLE
-#include "solenoid.h"
+#    include "solenoid.h"
 #endif
 
 haptic_config_t haptic_config;
 
 void haptic_init(void) {
-  debug_enable = 1; //Debug is ON!
-  if (!eeconfig_is_enabled()) {
-  	eeconfig_init();
-  }
-  haptic_config.raw = eeconfig_read_haptic();
-  if (haptic_config.mode < 1){
-  haptic_config.mode = 1;
-  }
-  if (!haptic_config.mode){
-  dprintf("No haptic config found in eeprom, setting default configs\n");
-  haptic_reset();
-  }
-  #ifdef SOLENOID_ENABLE
+    debug_enable = 1;  // Debug is ON!
+    if (!eeconfig_is_enabled()) {
+        eeconfig_init();
+    }
+    haptic_config.raw = eeconfig_read_haptic();
+    if (haptic_config.mode < 1) {
+        haptic_config.mode = 1;
+    }
+    if (!haptic_config.mode) {
+        dprintf("No haptic config found in eeprom, setting default configs\n");
+        haptic_reset();
+    }
+#ifdef SOLENOID_ENABLE
     solenoid_setup();
     dprintf("Solenoid driver initialized\n");
-  #endif
-  #ifdef DRV2605L
+#endif
+#ifdef DRV2605L
     DRV_init();
     dprintf("DRV2605 driver initialized\n");
-  #endif
-  eeconfig_debug_haptic();
+#endif
+    eeconfig_debug_haptic();
 }
 
 void haptic_task(void) {
-  #ifdef SOLENOID_ENABLE
-  solenoid_check();
-  #endif
+#ifdef SOLENOID_ENABLE
+    solenoid_check();
+#endif
 }
 
 void eeconfig_debug_haptic(void) {
-  dprintf("haptic_config eprom\n");
-  dprintf("haptic_config.enable = %d\n", haptic_config.enable);
-  dprintf("haptic_config.mode = %d\n", haptic_config.mode);
+    dprintf("haptic_config eprom\n");
+    dprintf("haptic_config.enable = %d\n", haptic_config.enable);
+    dprintf("haptic_config.mode = %d\n", haptic_config.mode);
 }
 
 void haptic_enable(void) {
-  haptic_config.enable = 1;
-  xprintf("haptic_config.enable = %u\n", haptic_config.enable);
-  eeconfig_update_haptic(haptic_config.raw);
+    haptic_config.enable = 1;
+    xprintf("haptic_config.enable = %u\n", haptic_config.enable);
+    eeconfig_update_haptic(haptic_config.raw);
 }
 
 void haptic_disable(void) {
-  haptic_config.enable = 0;
-  xprintf("haptic_config.enable = %u\n", haptic_config.enable);
-  eeconfig_update_haptic(haptic_config.raw);
+    haptic_config.enable = 0;
+    xprintf("haptic_config.enable = %u\n", haptic_config.enable);
+    eeconfig_update_haptic(haptic_config.raw);
 }
 
 void haptic_toggle(void) {
-if (haptic_config.enable) {
-  haptic_disable();
-  } else {
-  haptic_enable();
-  }
-  eeconfig_update_haptic(haptic_config.raw);
+    if (haptic_config.enable) {
+        haptic_disable();
+    } else {
+        haptic_enable();
+    }
+    eeconfig_update_haptic(haptic_config.raw);
 }
 
-void haptic_feedback_toggle(void){
- haptic_config.feedback++;
-  if (haptic_config.feedback >= HAPTIC_FEEDBACK_MAX)
-  haptic_config.feedback = KEY_PRESS;
-  xprintf("haptic_config.feedback = %u\n", !haptic_config.feedback);
-  eeconfig_update_haptic(haptic_config.raw);
+void haptic_feedback_toggle(void) {
+    haptic_config.feedback++;
+    if (haptic_config.feedback >= HAPTIC_FEEDBACK_MAX) haptic_config.feedback = KEY_PRESS;
+    xprintf("haptic_config.feedback = %u\n", !haptic_config.feedback);
+    eeconfig_update_haptic(haptic_config.raw);
 }
 
 void haptic_buzz_toggle(void) {
-  bool buzz_stat = !haptic_config.buzz;
-  haptic_config.buzz = buzz_stat;
-  haptic_set_buzz(buzz_stat);
+    bool buzz_stat     = !haptic_config.buzz;
+    haptic_config.buzz = buzz_stat;
+    haptic_set_buzz(buzz_stat);
 }
 
 void haptic_mode_increase(void) {
-  uint8_t mode = haptic_config.mode + 1;
-  #ifdef DRV2605L
-  if (haptic_config.mode >= drv_effect_max) {
-    mode = 1;
-  }
-  #endif
+    uint8_t mode = haptic_config.mode + 1;
+#ifdef DRV2605L
+    if (haptic_config.mode >= drv_effect_max) {
+        mode = 1;
+    }
+#endif
     haptic_set_mode(mode);
 }
 
 void haptic_mode_decrease(void) {
-  uint8_t mode = haptic_config.mode -1;
-  #ifdef DRV2605L
-  if (haptic_config.mode < 1) {
-    mode = (drv_effect_max - 1);
-  }
-  #endif
-  haptic_set_mode(mode);
+    uint8_t mode = haptic_config.mode - 1;
+#ifdef DRV2605L
+    if (haptic_config.mode < 1) {
+        mode = (drv_effect_max - 1);
+    }
+#endif
+    haptic_set_mode(mode);
 }
 
 void haptic_dwell_increase(void) {
-  uint8_t dwell = haptic_config.dwell + 1;
-  #ifdef SOLENOID_ENABLE
-  if (haptic_config.dwell >= SOLENOID_MAX_DWELL) {
-    dwell = 1;
-  }
-  solenoid_set_dwell(dwell);
-  #endif
-  haptic_set_dwell(dwell);
+    uint8_t dwell = haptic_config.dwell + 1;
+#ifdef SOLENOID_ENABLE
+    if (haptic_config.dwell >= SOLENOID_MAX_DWELL) {
+        dwell = 1;
+    }
+    solenoid_set_dwell(dwell);
+#endif
+    haptic_set_dwell(dwell);
 }
 
 void haptic_dwell_decrease(void) {
-  uint8_t dwell = haptic_config.dwell -1;
-  #ifdef SOLENOID_ENABLE
-  if (haptic_config.dwell < SOLENOID_MIN_DWELL) {
-    dwell = SOLENOID_MAX_DWELL;
-  }
-  solenoid_set_dwell(dwell);
-  #endif
-  haptic_set_dwell(dwell);
-}
-
-void haptic_reset(void){
-  haptic_config.enable = true;
-  uint8_t feedback = HAPTIC_FEEDBACK_DEFAULT;
-  haptic_config.feedback = feedback;
-  #ifdef DRV2605L
-    uint8_t mode = HAPTIC_MODE_DEFAULT;
+    uint8_t dwell = haptic_config.dwell - 1;
+#ifdef SOLENOID_ENABLE
+    if (haptic_config.dwell < SOLENOID_MIN_DWELL) {
+        dwell = SOLENOID_MAX_DWELL;
+    }
+    solenoid_set_dwell(dwell);
+#endif
+    haptic_set_dwell(dwell);
+}
+
+void haptic_reset(void) {
+    haptic_config.enable   = true;
+    uint8_t feedback       = HAPTIC_FEEDBACK_DEFAULT;
+    haptic_config.feedback = feedback;
+#ifdef DRV2605L
+    uint8_t mode       = HAPTIC_MODE_DEFAULT;
     haptic_config.mode = mode;
-  #endif
-  #ifdef SOLENOID_ENABLE
-    uint8_t dwell = SOLENOID_DEFAULT_DWELL;
+#endif
+#ifdef SOLENOID_ENABLE
+    uint8_t dwell       = SOLENOID_DEFAULT_DWELL;
     haptic_config.dwell = dwell;
-  #endif
-  eeconfig_update_haptic(haptic_config.raw);
-  xprintf("haptic_config.feedback = %u\n", haptic_config.feedback);
-  xprintf("haptic_config.mode = %u\n", haptic_config.mode);
+#endif
+    eeconfig_update_haptic(haptic_config.raw);
+    xprintf("haptic_config.feedback = %u\n", haptic_config.feedback);
+    xprintf("haptic_config.mode = %u\n", haptic_config.mode);
 }
 
 void haptic_set_feedback(uint8_t feedback) {
-  haptic_config.feedback = feedback;
-  eeconfig_update_haptic(haptic_config.raw);
-  xprintf("haptic_config.feedback = %u\n", haptic_config.feedback);
+    haptic_config.feedback = feedback;
+    eeconfig_update_haptic(haptic_config.raw);
+    xprintf("haptic_config.feedback = %u\n", haptic_config.feedback);
 }
 
 void haptic_set_mode(uint8_t mode) {
-  haptic_config.mode = mode;
-  eeconfig_update_haptic(haptic_config.raw);
-  xprintf("haptic_config.mode = %u\n", haptic_config.mode);
+    haptic_config.mode = mode;
+    eeconfig_update_haptic(haptic_config.raw);
+    xprintf("haptic_config.mode = %u\n", haptic_config.mode);
 }
 
 void haptic_set_buzz(uint8_t buzz) {
-  haptic_config.buzz = buzz;
-  eeconfig_update_haptic(haptic_config.raw);
-  xprintf("haptic_config.buzz = %u\n", haptic_config.buzz);
+    haptic_config.buzz = buzz;
+    eeconfig_update_haptic(haptic_config.raw);
+    xprintf("haptic_config.buzz = %u\n", haptic_config.buzz);
 }
 
 void haptic_set_dwell(uint8_t dwell) {
-  haptic_config.dwell = dwell;
-  eeconfig_update_haptic(haptic_config.raw);
-  xprintf("haptic_config.dwell = %u\n", haptic_config.dwell);
+    haptic_config.dwell = dwell;
+    eeconfig_update_haptic(haptic_config.raw);
+    xprintf("haptic_config.dwell = %u\n", haptic_config.dwell);
 }
 
 uint8_t haptic_get_mode(void) {
-  if (!haptic_config.enable){
-    return false;
-  }
-  return haptic_config.mode;
+    if (!haptic_config.enable) {
+        return false;
+    }
+    return haptic_config.mode;
 }
 
 uint8_t haptic_get_feedback(void) {
-  if (!haptic_config.enable){
-    return false;
-  }
-  return haptic_config.feedback;
+    if (!haptic_config.enable) {
+        return false;
+    }
+    return haptic_config.feedback;
 }
 
 uint8_t haptic_get_dwell(void) {
-  if (!haptic_config.enable){
-    return false;
-  }
-  return haptic_config.dwell;
+    if (!haptic_config.enable) {
+        return false;
+    }
+    return haptic_config.dwell;
 }
 
 void haptic_play(void) {
-  #ifdef DRV2605L
-  uint8_t play_eff = 0;
-  play_eff = haptic_config.mode;
-  DRV_pulse(play_eff);
-  #endif
-  #ifdef SOLENOID_ENABLE
-  solenoid_fire();
-  #endif
+#ifdef DRV2605L
+    uint8_t play_eff = 0;
+    play_eff         = haptic_config.mode;
+    DRV_pulse(play_eff);
+#endif
+#ifdef SOLENOID_ENABLE
+    solenoid_fire();
+#endif
 }
 
 bool process_haptic(uint16_t keycode, keyrecord_t *record) {
-    if (keycode == HPT_ON && record->event.pressed) { haptic_enable(); }
-    if (keycode == HPT_OFF && record->event.pressed) { haptic_disable(); }
-    if (keycode == HPT_TOG && record->event.pressed) { haptic_toggle(); }
-    if (keycode == HPT_RST && record->event.pressed) { haptic_reset(); }
-    if (keycode == HPT_FBK && record->event.pressed) { haptic_feedback_toggle(); }
-    if (keycode == HPT_BUZ && record->event.pressed) { haptic_buzz_toggle(); }
-    if (keycode == HPT_MODI && record->event.pressed) { haptic_mode_increase(); }
-    if (keycode == HPT_MODD && record->event.pressed) { haptic_mode_decrease(); }
-    if (keycode == HPT_DWLI && record->event.pressed) { haptic_dwell_increase(); }
-    if (keycode == HPT_DWLD && record->event.pressed) { haptic_dwell_decrease(); }
-  if (haptic_config.enable) {
-    if ( record->event.pressed ) {
-	// keypress
-      if (haptic_config.feedback < 2) {
-      haptic_play();
-      }
-    } else {
-    //keyrelease
-      if (haptic_config.feedback > 0) {
-      haptic_play();
-      } 
+    if (keycode == HPT_ON && record->event.pressed) {
+        haptic_enable();
     }
-  }
-  return true;
+    if (keycode == HPT_OFF && record->event.pressed) {
+        haptic_disable();
+    }
+    if (keycode == HPT_TOG && record->event.pressed) {
+        haptic_toggle();
+    }
+    if (keycode == HPT_RST && record->event.pressed) {
+        haptic_reset();
+    }
+    if (keycode == HPT_FBK && record->event.pressed) {
+        haptic_feedback_toggle();
+    }
+    if (keycode == HPT_BUZ && record->event.pressed) {
+        haptic_buzz_toggle();
+    }
+    if (keycode == HPT_MODI && record->event.pressed) {
+        haptic_mode_increase();
+    }
+    if (keycode == HPT_MODD && record->event.pressed) {
+        haptic_mode_decrease();
+    }
+    if (keycode == HPT_DWLI && record->event.pressed) {
+        haptic_dwell_increase();
+    }
+    if (keycode == HPT_DWLD && record->event.pressed) {
+        haptic_dwell_decrease();
+    }
+    if (haptic_config.enable) {
+        if (record->event.pressed) {
+            // keypress
+            if (haptic_config.feedback < 2) {
+                haptic_play();
+            }
+        } else {
+            // keyrelease
+            if (haptic_config.feedback > 0) {
+                haptic_play();
+            }
+        }
+    }
+    return true;
 }
 
 void haptic_shutdown(void) {
-  #ifdef SOLENOID_ENABLE
-  solenoid_shutdown();
-  #endif
-
+#ifdef SOLENOID_ENABLE
+    solenoid_shutdown();
+#endif
 }
diff --git a/drivers/haptic/haptic.h b/drivers/haptic/haptic.h
index d39dc5c3b9..8135d0d439 100644
--- a/drivers/haptic/haptic.h
+++ b/drivers/haptic/haptic.h
@@ -20,63 +20,57 @@
 #include <stdbool.h>
 #include "quantum.h"
 #ifdef DRV2605L
-#include "DRV2605L.h"
+#    include "DRV2605L.h"
 #endif
 
-
 #ifndef HAPTIC_FEEDBACK_DEFAULT
-#define HAPTIC_FEEDBACK_DEFAULT 0
+#    define HAPTIC_FEEDBACK_DEFAULT 0
 #endif
 #ifndef HAPTIC_MODE_DEFAULT
-#define HAPTIC_MODE_DEFAULT DRV_MODE_DEFAULT
+#    define HAPTIC_MODE_DEFAULT DRV_MODE_DEFAULT
 #endif
 
 /* EEPROM config settings */
 typedef union {
-  uint32_t raw;
-  struct {
-    bool     enable    :1;
-    uint8_t  feedback  :2;
-    uint8_t  mode      :7;
-    bool     buzz      :1;
-    uint8_t  dwell     :7;
-    uint16_t reserved  :16; 
-  };
+    uint32_t raw;
+    struct {
+        bool     enable : 1;
+        uint8_t  feedback : 2;
+        uint8_t  mode : 7;
+        bool     buzz : 1;
+        uint8_t  dwell : 7;
+        uint16_t reserved : 16;
+    };
 } haptic_config_t;
 
-typedef enum HAPTIC_FEEDBACK{
-  KEY_PRESS,
-  KEY_PRESS_RELEASE,
-  KEY_RELEASE,
-  HAPTIC_FEEDBACK_MAX,
+typedef enum HAPTIC_FEEDBACK {
+    KEY_PRESS,
+    KEY_PRESS_RELEASE,
+    KEY_RELEASE,
+    HAPTIC_FEEDBACK_MAX,
 } HAPTIC_FEEDBACK;
 
-bool process_haptic(uint16_t keycode, keyrecord_t *record);
-void haptic_init(void);
-void haptic_task(void);
-void eeconfig_debug_haptic(void);
-void haptic_enable(void);
-void haptic_disable(void);
-void haptic_toggle(void);
-void haptic_feedback_toggle(void);
-void haptic_mode_increase(void);
-void haptic_mode_decrease(void);
-void haptic_mode(uint8_t mode);
-void haptic_reset(void);
-void haptic_set_feedback(uint8_t feedback);
-void haptic_set_mode(uint8_t mode);
-void haptic_set_dwell(uint8_t dwell);
-void haptic_set_buzz(uint8_t buzz);
-void haptic_buzz_toggle(void);
+bool    process_haptic(uint16_t keycode, keyrecord_t *record);
+void    haptic_init(void);
+void    haptic_task(void);
+void    eeconfig_debug_haptic(void);
+void    haptic_enable(void);
+void    haptic_disable(void);
+void    haptic_toggle(void);
+void    haptic_feedback_toggle(void);
+void    haptic_mode_increase(void);
+void    haptic_mode_decrease(void);
+void    haptic_mode(uint8_t mode);
+void    haptic_reset(void);
+void    haptic_set_feedback(uint8_t feedback);
+void    haptic_set_mode(uint8_t mode);
+void    haptic_set_dwell(uint8_t dwell);
+void    haptic_set_buzz(uint8_t buzz);
+void    haptic_buzz_toggle(void);
 uint8_t haptic_get_mode(void);
 uint8_t haptic_get_feedback(void);
-void haptic_dwell_increase(void);
-void haptic_dwell_decrease(void);
+void    haptic_dwell_increase(void);
+void    haptic_dwell_decrease(void);
 
 void haptic_play(void);
 void haptic_shutdown(void);
-
-
-
-
-
diff --git a/drivers/haptic/solenoid.c b/drivers/haptic/solenoid.c
index 2d39dbc179..d645c379ae 100644
--- a/drivers/haptic/solenoid.c
+++ b/drivers/haptic/solenoid.c
@@ -19,91 +19,77 @@
 #include "solenoid.h"
 #include "haptic.h"
 
-bool solenoid_on = false;
-bool solenoid_buzzing = false;
-uint16_t solenoid_start = 0;
-uint8_t solenoid_dwell = SOLENOID_DEFAULT_DWELL;
+bool     solenoid_on      = false;
+bool     solenoid_buzzing = false;
+uint16_t solenoid_start   = 0;
+uint8_t  solenoid_dwell   = SOLENOID_DEFAULT_DWELL;
 
 extern haptic_config_t haptic_config;
 
+void solenoid_buzz_on(void) { haptic_set_buzz(1); }
 
-void solenoid_buzz_on(void) {
-  haptic_set_buzz(1);
-}
-
-void solenoid_buzz_off(void) {
-  haptic_set_buzz(0);
-}
-
-void solenoid_set_buzz(int buzz) {
-  haptic_set_buzz(buzz);
-}
+void solenoid_buzz_off(void) { haptic_set_buzz(0); }
 
+void solenoid_set_buzz(int buzz) { haptic_set_buzz(buzz); }
 
 void solenoid_dwell_minus(uint8_t solenoid_dwell) {
-  if (solenoid_dwell > 0) solenoid_dwell--;
+    if (solenoid_dwell > 0) solenoid_dwell--;
 }
 
 void solenoid_dwell_plus(uint8_t solenoid_dwell) {
-  if (solenoid_dwell < SOLENOID_MAX_DWELL) solenoid_dwell++;
+    if (solenoid_dwell < SOLENOID_MAX_DWELL) solenoid_dwell++;
 }
 
-void solenoid_set_dwell(uint8_t dwell) {
-  solenoid_dwell = dwell;
-}
+void solenoid_set_dwell(uint8_t dwell) { solenoid_dwell = dwell; }
 
 void solenoid_stop(void) {
-  writePinLow(SOLENOID_PIN);
-  solenoid_on = false;
-  solenoid_buzzing = false;
+    writePinLow(SOLENOID_PIN);
+    solenoid_on      = false;
+    solenoid_buzzing = false;
 }
 
 void solenoid_fire(void) {
-  if (!haptic_config.buzz && solenoid_on) return;
-  if (haptic_config.buzz && solenoid_buzzing) return;
+    if (!haptic_config.buzz && solenoid_on) return;
+    if (haptic_config.buzz && solenoid_buzzing) return;
 
-  solenoid_on = true;
-  solenoid_buzzing = true;
-  solenoid_start = timer_read();
-  writePinHigh(SOLENOID_PIN);
+    solenoid_on      = true;
+    solenoid_buzzing = true;
+    solenoid_start   = timer_read();
+    writePinHigh(SOLENOID_PIN);
 }
 
 void solenoid_check(void) {
-  uint16_t elapsed = 0;
-
-  if (!solenoid_on) return;
+    uint16_t elapsed = 0;
 
-  elapsed = timer_elapsed(solenoid_start);
+    if (!solenoid_on) return;
 
-  //Check if it's time to finish this solenoid click cycle
-  if (elapsed > solenoid_dwell) {
-    solenoid_stop();
-    return;
-  }
+    elapsed = timer_elapsed(solenoid_start);
 
-  //Check whether to buzz the solenoid on and off
-  if (haptic_config.buzz) {
-    if (elapsed / SOLENOID_MIN_DWELL % 2 == 0){
-      if (!solenoid_buzzing) {
-        solenoid_buzzing = true;
-        writePinHigh(SOLENOID_PIN);
-      }
+    // Check if it's time to finish this solenoid click cycle
+    if (elapsed > solenoid_dwell) {
+        solenoid_stop();
+        return;
     }
-    else {
-      if (solenoid_buzzing) {
-        solenoid_buzzing = false;
-        writePinLow(SOLENOID_PIN);
-      }
+
+    // Check whether to buzz the solenoid on and off
+    if (haptic_config.buzz) {
+        if (elapsed / SOLENOID_MIN_DWELL % 2 == 0) {
+            if (!solenoid_buzzing) {
+                solenoid_buzzing = true;
+                writePinHigh(SOLENOID_PIN);
+            }
+        } else {
+            if (solenoid_buzzing) {
+                solenoid_buzzing = false;
+                writePinLow(SOLENOID_PIN);
+            }
+        }
     }
-  }
 }
 
 void solenoid_setup(void) {
-  setPinOutput(SOLENOID_PIN);
-  solenoid_fire();
+    setPinOutput(SOLENOID_PIN);
+    solenoid_fire();
 }
 
-void solenoid_shutdown(void) {
-  writePinLow(SOLENOID_PIN);
-
-}
+void solenoid_shutdown(void) { writePinLow(SOLENOID_PIN); }
diff --git a/drivers/haptic/solenoid.h b/drivers/haptic/solenoid.h
index a08f62a11e..53dc626e33 100644
--- a/drivers/haptic/solenoid.h
+++ b/drivers/haptic/solenoid.h
@@ -18,23 +18,23 @@
 #pragma once
 
 #ifndef SOLENOID_DEFAULT_DWELL
-#define SOLENOID_DEFAULT_DWELL 12
+#    define SOLENOID_DEFAULT_DWELL 12
 #endif
 
 #ifndef SOLENOID_MAX_DWELL
-#define SOLENOID_MAX_DWELL 100
+#    define SOLENOID_MAX_DWELL 100
 #endif
 
 #ifndef SOLENOID_MIN_DWELL
-#define SOLENOID_MIN_DWELL 4
+#    define SOLENOID_MIN_DWELL 4
 #endif
 
 #ifndef SOLENOID_ACTIVE
-#define SOLENOID_ACTIVE false
+#    define SOLENOID_ACTIVE false
 #endif
 
 #ifndef SOLENOID_PIN
-#define SOLENOID_PIN F6
+#    define SOLENOID_PIN F6
 #endif
 
 void solenoid_buzz_on(void);
diff --git a/drivers/issi/is31fl3218.c b/drivers/issi/is31fl3218.c
index db44f72564..d43863ac4b 100644
--- a/drivers/issi/is31fl3218.c
+++ b/drivers/issi/is31fl3218.c
@@ -35,68 +35,62 @@ uint8_t g_twi_transfer_buffer[20];
 // IS31FL3218 has 18 PWM outputs and a fixed I2C address, so no chaining.
 // If used as RGB LED driver, LEDs are assigned RGB,RGB,RGB,RGB,RGB,RGB
 uint8_t g_pwm_buffer[18];
-bool g_pwm_buffer_update_required = false;
+bool    g_pwm_buffer_update_required = false;
 
-void IS31FL3218_write_register( uint8_t reg, uint8_t data )
-{
-	g_twi_transfer_buffer[0] = reg;
-	g_twi_transfer_buffer[1] = data;
-	i2c_transmit( ISSI_ADDRESS, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+void IS31FL3218_write_register(uint8_t reg, uint8_t data) {
+    g_twi_transfer_buffer[0] = reg;
+    g_twi_transfer_buffer[1] = data;
+    i2c_transmit(ISSI_ADDRESS, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
 }
 
-void IS31FL3218_write_pwm_buffer( uint8_t *pwm_buffer )
-{
-	g_twi_transfer_buffer[0] = ISSI_REG_PWM;
-	for ( int i=0; i<18; i++ ) {
-		g_twi_transfer_buffer[1+i] = pwm_buffer[i];
-	}
-	
-	i2c_transmit( ISSI_ADDRESS, g_twi_transfer_buffer, 19, ISSI_TIMEOUT);
+void IS31FL3218_write_pwm_buffer(uint8_t *pwm_buffer) {
+    g_twi_transfer_buffer[0] = ISSI_REG_PWM;
+    for (int i = 0; i < 18; i++) {
+        g_twi_transfer_buffer[1 + i] = pwm_buffer[i];
+    }
+
+    i2c_transmit(ISSI_ADDRESS, g_twi_transfer_buffer, 19, ISSI_TIMEOUT);
 }
 
-void IS31FL3218_init(void)
-{
-	// In case we ever want to reinitialize (?)
-	IS31FL3218_write_register( ISSI_REG_RESET, 0x00 );
-	
-	// Turn off software shutdown
-	IS31FL3218_write_register( ISSI_REG_SHUTDOWN, 0x01 );
-
-	// Set all PWM values to zero
-	for ( uint8_t i = 0; i < 18; i++ ) {
-		IS31FL3218_write_register( ISSI_REG_PWM+i, 0x00 );
-	}
-	
-	// Enable all channels
-	for ( uint8_t i = 0; i < 3; i++ ) {
-		IS31FL3218_write_register( ISSI_REG_CONTROL+i, 0b00111111 );
-	}
-	
-	// Load PWM registers and LED Control register data
-	IS31FL3218_write_register( ISSI_REG_UPDATE, 0x01 );
+void IS31FL3218_init(void) {
+    // In case we ever want to reinitialize (?)
+    IS31FL3218_write_register(ISSI_REG_RESET, 0x00);
+
+    // Turn off software shutdown
+    IS31FL3218_write_register(ISSI_REG_SHUTDOWN, 0x01);
+
+    // Set all PWM values to zero
+    for (uint8_t i = 0; i < 18; i++) {
+        IS31FL3218_write_register(ISSI_REG_PWM + i, 0x00);
+    }
+
+    // Enable all channels
+    for (uint8_t i = 0; i < 3; i++) {
+        IS31FL3218_write_register(ISSI_REG_CONTROL + i, 0b00111111);
+    }
+
+    // Load PWM registers and LED Control register data
+    IS31FL3218_write_register(ISSI_REG_UPDATE, 0x01);
 }
 
-void IS31FL3218_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
-{
-	g_pwm_buffer[index * 3 + 0] = red;
-	g_pwm_buffer[index * 3 + 1] = green;
-	g_pwm_buffer[index * 3 + 2] = blue;
-	g_pwm_buffer_update_required = true;
+void IS31FL3218_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
+    g_pwm_buffer[index * 3 + 0]  = red;
+    g_pwm_buffer[index * 3 + 1]  = green;
+    g_pwm_buffer[index * 3 + 2]  = blue;
+    g_pwm_buffer_update_required = true;
 }
 
-void IS31FL3218_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
-{
-	for ( int i = 0; i < 6; i++ ) {
-		IS31FL3218_set_color( i, red, green, blue );
-	}
+void IS31FL3218_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
+    for (int i = 0; i < 6; i++) {
+        IS31FL3218_set_color(i, red, green, blue);
+    }
 }
 
-void IS31FL3218_update_pwm_buffers(void)
-{
-	if ( g_pwm_buffer_update_required ) {
-		IS31FL3218_write_pwm_buffer( g_pwm_buffer );
-		// Load PWM registers and LED Control register data
-		IS31FL3218_write_register( ISSI_REG_UPDATE, 0x01 );
-	}
-	g_pwm_buffer_update_required = false;
+void IS31FL3218_update_pwm_buffers(void) {
+    if (g_pwm_buffer_update_required) {
+        IS31FL3218_write_pwm_buffer(g_pwm_buffer);
+        // Load PWM registers and LED Control register data
+        IS31FL3218_write_register(ISSI_REG_UPDATE, 0x01);
+    }
+    g_pwm_buffer_update_required = false;
 }
diff --git a/drivers/issi/is31fl3218.h b/drivers/issi/is31fl3218.h
index 2d24e51463..a70cc1e793 100644
--- a/drivers/issi/is31fl3218.h
+++ b/drivers/issi/is31fl3218.h
@@ -19,6 +19,6 @@
 #include <stdbool.h>
 
 void IS31FL3218_init(void);
-void IS31FL3218_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
-void IS31FL3218_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3218_set_color(int index, uint8_t red, uint8_t green, uint8_t blue);
+void IS31FL3218_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
 void IS31FL3218_update_pwm_buffers(void);
diff --git a/drivers/issi/is31fl3731-simple.c b/drivers/issi/is31fl3731-simple.c
index a7faa9c38c..fad4676def 100644
--- a/drivers/issi/is31fl3731-simple.c
+++ b/drivers/issi/is31fl3731-simple.c
@@ -17,11 +17,11 @@
  */
 
 #ifdef __AVR__
-#include <avr/interrupt.h>
-#include <avr/io.h>
-#include <util/delay.h>
+#    include <avr/interrupt.h>
+#    include <avr/io.h>
+#    include <util/delay.h>
 #else
-#include "wait.h"
+#    include "wait.h"
 #endif
 
 #include <stdint.h>
@@ -41,7 +41,7 @@
 // 0b1110110 AD <-> SDA
 #define ISSI_ADDR_DEFAULT 0x74
 
-#define ISSI_REG_CONFIG  0x00
+#define ISSI_REG_CONFIG 0x00
 #define ISSI_REG_CONFIG_PICTUREMODE 0x00
 #define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08
 #define ISSI_REG_CONFIG_AUDIOPLAYMODE 0x18
@@ -50,20 +50,20 @@
 #define ISSI_CONF_AUTOFRAMEMODE 0x04
 #define ISSI_CONF_AUDIOMODE 0x08
 
-#define ISSI_REG_PICTUREFRAME  0x01
+#define ISSI_REG_PICTUREFRAME 0x01
 
 #define ISSI_REG_SHUTDOWN 0x0A
 #define ISSI_REG_AUDIOSYNC 0x06
 
 #define ISSI_COMMANDREGISTER 0xFD
-#define ISSI_BANK_FUNCTIONREG 0x0B    // helpfully called 'page nine'
+#define ISSI_BANK_FUNCTIONREG 0x0B  // helpfully called 'page nine'
 
 #ifndef ISSI_TIMEOUT
-  #define ISSI_TIMEOUT 100
+#    define ISSI_TIMEOUT 100
 #endif
 
 #ifndef ISSI_PERSISTENCE
-  #define ISSI_PERSISTENCE 0
+#    define ISSI_PERSISTENCE 0
 #endif
 
 // Transfer buffer for TWITransmitData()
@@ -75,17 +75,17 @@ uint8_t g_twi_transfer_buffer[20];
 // buffers and the transfers in IS31FL3731_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
 uint8_t g_pwm_buffer[LED_DRIVER_COUNT][144];
-bool g_pwm_buffer_update_required = false;
+bool    g_pwm_buffer_update_required = false;
 
 /* There's probably a better way to init this... */
 #if LED_DRIVER_COUNT == 1
-    uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}};
+uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}};
 #elif LED_DRIVER_COUNT == 2
-    uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}};
+uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}};
 #elif LED_DRIVER_COUNT == 3
-    uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}, {0}};
+uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}, {0}};
 #elif LED_DRIVER_COUNT == 4
-    uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}, {0}, {0}};
+uint8_t g_led_control_registers[LED_DRIVER_COUNT][18] = {{0}, {0}, {0}, {0}};
 #endif
 bool g_led_control_registers_update_required = false;
 
@@ -103,20 +103,19 @@ bool g_led_control_registers_update_required = false;
 // 0x0E - R17,G15,G14,G13,G12,G11,G10,G09
 // 0x10 - R16,R15,R14,R13,R12,R11,R10,R09
 
-
 void IS31FL3731_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
     g_twi_transfer_buffer[0] = reg;
     g_twi_transfer_buffer[1] = data;
 
-    #if ISSI_PERSISTENCE > 0
-        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) {
-              break;
-            }
+#if ISSI_PERSISTENCE > 0
+    for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) {
+            break;
         }
-    #else
-        i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
-    #endif
+    }
+#else
+    i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+#endif
 }
 
 void IS31FL3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
@@ -136,14 +135,13 @@ void IS31FL3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
             g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
         }
 
-    #if ISSI_PERSISTENCE > 0
-      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
-          break;
-      }
-    #else
-      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
-    #endif
+#if ISSI_PERSISTENCE > 0
+        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0) break;
+        }
+#else
+        i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+#endif
     }
 }
 
@@ -196,7 +194,6 @@ void IS31FL3731_init(uint8_t addr) {
     // most usage after initialization is just writing PWM buffers in bank 0
     // as there's not much point in double-buffering
     IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
-
 }
 
 void IS31FL3731_set_value(int index, uint8_t value) {
@@ -205,7 +202,7 @@ void IS31FL3731_set_value(int index, uint8_t value) {
 
         // Subtract 0x24 to get the second index of g_pwm_buffer
         g_pwm_buffer[led.driver][led.v - 0x24] = value;
-        g_pwm_buffer_update_required = true;
+        g_pwm_buffer_update_required           = true;
     }
 }
 
@@ -216,10 +213,10 @@ void IS31FL3731_set_value_all(uint8_t value) {
 }
 
 void IS31FL3731_set_led_control_register(uint8_t index, bool value) {
-  is31_led led = g_is31_leds[index];
+    is31_led led = g_is31_leds[index];
 
-  uint8_t control_register = (led.v - 0x24) / 8;
-  uint8_t bit_value = (led.v - 0x24) % 8;
+    uint8_t control_register = (led.v - 0x24) / 8;
+    uint8_t bit_value        = (led.v - 0x24) % 8;
 
     if (value) {
         g_led_control_registers[led.driver][control_register] |= (1 << bit_value);
@@ -239,7 +236,7 @@ void IS31FL3731_update_pwm_buffers(uint8_t addr, uint8_t index) {
 
 void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index) {
     if (g_led_control_registers_update_required) {
-        for (int i=0; i<18; i++) {
+        for (int i = 0; i < 18; i++) {
             IS31FL3731_write_register(addr, i, g_led_control_registers[index][i]);
         }
     }
diff --git a/drivers/issi/is31fl3731-simple.h b/drivers/issi/is31fl3731-simple.h
index dbe4982817..a223c351e8 100644
--- a/drivers/issi/is31fl3731-simple.h
+++ b/drivers/issi/is31fl3731-simple.h
@@ -16,14 +16,12 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-
 #ifndef IS31FL3731_DRIVER_H
 #define IS31FL3731_DRIVER_H
 
-
 typedef struct is31_led {
-  uint8_t driver:2;
-  uint8_t v;
+    uint8_t driver : 2;
+    uint8_t v;
 } __attribute__((packed)) is31_led;
 
 extern const is31_led g_is31_leds[LED_DRIVER_LED_COUNT];
@@ -44,16 +42,16 @@ void IS31FL3731_set_led_control_register(uint8_t index, bool value);
 void IS31FL3731_update_pwm_buffers(uint8_t addr, uint8_t index);
 void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
 
-#define C1_1  0x24
-#define C1_2  0x25
-#define C1_3  0x26
-#define C1_4  0x27
-#define C1_5  0x28
-#define C1_6  0x29
-#define C1_7  0x2A
-#define C1_8  0x2B
+#define C1_1 0x24
+#define C1_2 0x25
+#define C1_3 0x26
+#define C1_4 0x27
+#define C1_5 0x28
+#define C1_6 0x29
+#define C1_7 0x2A
+#define C1_8 0x2B
 
-#define C1_9  0x2C
+#define C1_9 0x2C
 #define C1_10 0x2D
 #define C1_11 0x2E
 #define C1_12 0x2F
@@ -62,16 +60,16 @@ void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
 #define C1_15 0x32
 #define C1_16 0x33
 
-#define C2_1  0x34
-#define C2_2  0x35
-#define C2_3  0x36
-#define C2_4  0x37
-#define C2_5  0x38
-#define C2_6  0x39
-#define C2_7  0x3A
-#define C2_8  0x3B
+#define C2_1 0x34
+#define C2_2 0x35
+#define C2_3 0x36
+#define C2_4 0x37
+#define C2_5 0x38
+#define C2_6 0x39
+#define C2_7 0x3A
+#define C2_8 0x3B
 
-#define C2_9  0x3C
+#define C2_9 0x3C
 #define C2_10 0x3D
 #define C2_11 0x3E
 #define C2_12 0x3F
@@ -80,16 +78,16 @@ void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
 #define C2_15 0x42
 #define C2_16 0x43
 
-#define C3_1  0x44
-#define C3_2  0x45
-#define C3_3  0x46
-#define C3_4  0x47
-#define C3_5  0x48
-#define C3_6  0x49
-#define C3_7  0x4A
-#define C3_8  0x4B
+#define C3_1 0x44
+#define C3_2 0x45
+#define C3_3 0x46
+#define C3_4 0x47
+#define C3_5 0x48
+#define C3_6 0x49
+#define C3_7 0x4A
+#define C3_8 0x4B
 
-#define C3_9  0x4C
+#define C3_9 0x4C
 #define C3_10 0x4D
 #define C3_11 0x4E
 #define C3_12 0x4F
@@ -98,16 +96,16 @@ void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
 #define C3_15 0x52
 #define C3_16 0x53
 
-#define C4_1  0x54
-#define C4_2  0x55
-#define C4_3  0x56
-#define C4_4  0x57
-#define C4_5  0x58
-#define C4_6  0x59
-#define C4_7  0x5A
-#define C4_8  0x5B
+#define C4_1 0x54
+#define C4_2 0x55
+#define C4_3 0x56
+#define C4_4 0x57
+#define C4_5 0x58
+#define C4_6 0x59
+#define C4_7 0x5A
+#define C4_8 0x5B
 
-#define C4_9  0x5C
+#define C4_9 0x5C
 #define C4_10 0x5D
 #define C4_11 0x5E
 #define C4_12 0x5F
@@ -116,16 +114,16 @@ void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
 #define C4_15 0x62
 #define C4_16 0x63
 
-#define C5_1  0x64
-#define C5_2  0x65
-#define C5_3  0x66
-#define C5_4  0x67
-#define C5_5  0x68
-#define C5_6  0x69
-#define C5_7  0x6A
-#define C5_8  0x6B
+#define C5_1 0x64
+#define C5_2 0x65
+#define C5_3 0x66
+#define C5_4 0x67
+#define C5_5 0x68
+#define C5_6 0x69
+#define C5_7 0x6A
+#define C5_8 0x6B
 
-#define C5_9  0x6C
+#define C5_9 0x6C
 #define C5_10 0x6D
 #define C5_11 0x6E
 #define C5_12 0x6F
@@ -134,16 +132,16 @@ void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
 #define C5_15 0x72
 #define C5_16 0x73
 
-#define C6_1  0x74
-#define C6_2  0x75
-#define C6_3  0x76
-#define C6_4  0x77
-#define C6_5  0x78
-#define C6_6  0x79
-#define C6_7  0x7A
-#define C6_8  0x7B
+#define C6_1 0x74
+#define C6_2 0x75
+#define C6_3 0x76
+#define C6_4 0x77
+#define C6_5 0x78
+#define C6_6 0x79
+#define C6_7 0x7A
+#define C6_8 0x7B
 
-#define C6_9  0x7C
+#define C6_9 0x7C
 #define C6_10 0x7D
 #define C6_11 0x7E
 #define C6_12 0x7F
@@ -152,16 +150,16 @@ void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
 #define C6_15 0x82
 #define C6_16 0x83
 
-#define C7_1  0x84
-#define C7_2  0x85
-#define C7_3  0x86
-#define C7_4  0x87
-#define C7_5  0x88
-#define C7_6  0x89
-#define C7_7  0x8A
-#define C7_8  0x8B
+#define C7_1 0x84
+#define C7_2 0x85
+#define C7_3 0x86
+#define C7_4 0x87
+#define C7_5 0x88
+#define C7_6 0x89
+#define C7_7 0x8A
+#define C7_8 0x8B
 
-#define C7_9  0x8C
+#define C7_9 0x8C
 #define C7_10 0x8D
 #define C7_11 0x8E
 #define C7_12 0x8F
@@ -170,16 +168,16 @@ void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
 #define C7_15 0x92
 #define C7_16 0x93
 
-#define C8_1  0x94
-#define C8_2  0x95
-#define C8_3  0x96
-#define C8_4  0x97
-#define C8_5  0x98
-#define C8_6  0x99
-#define C8_7  0x9A
-#define C8_8  0x9B
+#define C8_1 0x94
+#define C8_2 0x95
+#define C8_3 0x96
+#define C8_4 0x97
+#define C8_5 0x98
+#define C8_6 0x99
+#define C8_7 0x9A
+#define C8_8 0x9B
 
-#define C8_9  0x9C
+#define C8_9 0x9C
 #define C8_10 0x9D
 #define C8_11 0x9E
 #define C8_12 0x9F
@@ -188,16 +186,16 @@ void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
 #define C8_15 0xA2
 #define C8_16 0xA3
 
-#define C9_1  0xA4
-#define C9_2  0xA5
-#define C9_3  0xA6
-#define C9_4  0xA7
-#define C9_5  0xA8
-#define C9_6  0xA9
-#define C9_7  0xAA
-#define C9_8  0xAB
+#define C9_1 0xA4
+#define C9_2 0xA5
+#define C9_3 0xA6
+#define C9_4 0xA7
+#define C9_5 0xA8
+#define C9_6 0xA9
+#define C9_7 0xAA
+#define C9_8 0xAB
 
-#define C9_9  0xAC
+#define C9_9 0xAC
 #define C9_10 0xAD
 #define C9_11 0xAE
 #define C9_12 0xAF
@@ -206,5 +204,4 @@ void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
 #define C9_15 0xB2
 #define C9_16 0xB3
 
-
-#endif // IS31FL3731_DRIVER_H
+#endif  // IS31FL3731_DRIVER_H
diff --git a/drivers/issi/is31fl3731.c b/drivers/issi/is31fl3731.c
index 30c7dd0530..0b6f3e985d 100644
--- a/drivers/issi/is31fl3731.c
+++ b/drivers/issi/is31fl3731.c
@@ -16,11 +16,11 @@
  */
 
 #ifdef __AVR__
-#include <avr/interrupt.h>
-#include <avr/io.h>
-#include <util/delay.h>
+#    include <avr/interrupt.h>
+#    include <avr/io.h>
+#    include <util/delay.h>
 #else
-#include "wait.h"
+#    include "wait.h"
 #endif
 
 #include "is31fl3731.h"
@@ -37,7 +37,7 @@
 // 0b1110110 AD <-> SDA
 #define ISSI_ADDR_DEFAULT 0x74
 
-#define ISSI_REG_CONFIG  0x00
+#define ISSI_REG_CONFIG 0x00
 #define ISSI_REG_CONFIG_PICTUREMODE 0x00
 #define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08
 #define ISSI_REG_CONFIG_AUDIOPLAYMODE 0x18
@@ -46,20 +46,20 @@
 #define ISSI_CONF_AUTOFRAMEMODE 0x04
 #define ISSI_CONF_AUDIOMODE 0x08
 
-#define ISSI_REG_PICTUREFRAME  0x01
+#define ISSI_REG_PICTUREFRAME 0x01
 
 #define ISSI_REG_SHUTDOWN 0x0A
 #define ISSI_REG_AUDIOSYNC 0x06
 
 #define ISSI_COMMANDREGISTER 0xFD
-#define ISSI_BANK_FUNCTIONREG 0x0B    // helpfully called 'page nine'
+#define ISSI_BANK_FUNCTIONREG 0x0B  // helpfully called 'page nine'
 
 #ifndef ISSI_TIMEOUT
-  #define ISSI_TIMEOUT 100
+#    define ISSI_TIMEOUT 100
 #endif
 
 #ifndef ISSI_PERSISTENCE
-  #define ISSI_PERSISTENCE 0
+#    define ISSI_PERSISTENCE 0
 #endif
 
 // Transfer buffer for TWITransmitData()
@@ -71,10 +71,10 @@ uint8_t g_twi_transfer_buffer[20];
 // buffers and the transfers in IS31FL3731_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
 uint8_t g_pwm_buffer[DRIVER_COUNT][144];
-bool g_pwm_buffer_update_required[DRIVER_COUNT] = { false };
+bool    g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
 
-uint8_t g_led_control_registers[DRIVER_COUNT][18] = { { 0 }, { 0 } };
-bool g_led_control_registers_update_required[DRIVER_COUNT] = { false };
+uint8_t g_led_control_registers[DRIVER_COUNT][18]             = {{0}, {0}};
+bool    g_led_control_registers_update_required[DRIVER_COUNT] = {false};
 
 // This is the bit pattern in the LED control registers
 // (for matrix A, add one to register for matrix B)
@@ -90,179 +90,159 @@ bool g_led_control_registers_update_required[DRIVER_COUNT] = { false };
 // 0x0E - R17,G15,G14,G13,G12,G11,G10,G09
 // 0x10 - R16,R15,R14,R13,R12,R11,R10,R09
 
-
-void IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data )
-{
+void IS31FL3731_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
     g_twi_transfer_buffer[0] = reg;
     g_twi_transfer_buffer[1] = data;
 
-  #if ISSI_PERSISTENCE > 0
+#if ISSI_PERSISTENCE > 0
     for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-      if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
-        break;
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) break;
     }
-  #else
+#else
     i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
-  #endif
+#endif
 }
 
-void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
-{
+void IS31FL3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
     // assumes bank is already selected
 
     // transmit PWM registers in 9 transfers of 16 bytes
     // g_twi_transfer_buffer[] is 20 bytes
 
     // iterate over the pwm_buffer contents at 16 byte intervals
-    for ( int i = 0; i < 144; i += 16 ) {
+    for (int i = 0; i < 144; i += 16) {
         // set the first register, e.g. 0x24, 0x34, 0x44, etc.
         g_twi_transfer_buffer[0] = 0x24 + i;
         // copy the data from i to i+15
         // device will auto-increment register for data after the first byte
         // thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
-        for ( int j = 0; j < 16; j++ ) {
+        for (int j = 0; j < 16; j++) {
             g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
         }
 
-    #if ISSI_PERSISTENCE > 0
-      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
-          break;
-      }
-    #else
-      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
-    #endif
+#if ISSI_PERSISTENCE > 0
+        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0) break;
+        }
+#else
+        i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+#endif
     }
 }
 
-void IS31FL3731_init( uint8_t addr )
-{
+void IS31FL3731_init(uint8_t addr) {
     // In order to avoid the LEDs being driven with garbage data
     // in the LED driver's PWM registers, first enable software shutdown,
     // then set up the mode and other settings, clear the PWM registers,
     // then disable software shutdown.
 
     // select "function register" bank
-    IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
+    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
 
     // enable software shutdown
-    IS31FL3731_write_register( addr, ISSI_REG_SHUTDOWN, 0x00 );
-    // this delay was copied from other drivers, might not be needed
-    #ifdef __AVR__
-    _delay_ms( 10 );
-    #else
+    IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00);
+// this delay was copied from other drivers, might not be needed
+#ifdef __AVR__
+    _delay_ms(10);
+#else
     wait_ms(10);
-    #endif
+#endif
 
     // picture mode
-    IS31FL3731_write_register( addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE );
+    IS31FL3731_write_register(addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE);
     // display frame 0
-    IS31FL3731_write_register( addr, ISSI_REG_PICTUREFRAME, 0x00 );
+    IS31FL3731_write_register(addr, ISSI_REG_PICTUREFRAME, 0x00);
     // audio sync off
-    IS31FL3731_write_register( addr, ISSI_REG_AUDIOSYNC, 0x00 );
+    IS31FL3731_write_register(addr, ISSI_REG_AUDIOSYNC, 0x00);
 
     // select bank 0
-    IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, 0 );
+    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
 
     // turn off all LEDs in the LED control register
-    for ( int i = 0x00; i <= 0x11; i++ )
-    {
-        IS31FL3731_write_register( addr, i, 0x00 );
+    for (int i = 0x00; i <= 0x11; i++) {
+        IS31FL3731_write_register(addr, i, 0x00);
     }
 
     // turn off all LEDs in the blink control register (not really needed)
-    for ( int i = 0x12; i <= 0x23; i++ )
-    {
-        IS31FL3731_write_register( addr, i, 0x00 );
+    for (int i = 0x12; i <= 0x23; i++) {
+        IS31FL3731_write_register(addr, i, 0x00);
     }
 
     // set PWM on all LEDs to 0
-    for ( int i = 0x24; i <= 0xB3; i++ )
-    {
-        IS31FL3731_write_register( addr, i, 0x00 );
+    for (int i = 0x24; i <= 0xB3; i++) {
+        IS31FL3731_write_register(addr, i, 0x00);
     }
 
     // select "function register" bank
-    IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG );
+    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
 
     // disable software shutdown
-    IS31FL3731_write_register( addr, ISSI_REG_SHUTDOWN, 0x01 );
+    IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x01);
 
     // select bank 0 and leave it selected.
     // most usage after initialization is just writing PWM buffers in bank 0
     // as there's not much point in double-buffering
-    IS31FL3731_write_register( addr, ISSI_COMMANDREGISTER, 0 );
-
+    IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
 }
 
-void IS31FL3731_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
-{
-    if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
+void IS31FL3731_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
+    if (index >= 0 && index < DRIVER_LED_TOTAL) {
         is31_led led = g_is31_leds[index];
 
         // Subtract 0x24 to get the second index of g_pwm_buffer
-        g_pwm_buffer[led.driver][led.r - 0x24] = red;
-        g_pwm_buffer[led.driver][led.g - 0x24] = green;
-        g_pwm_buffer[led.driver][led.b - 0x24] = blue;
+        g_pwm_buffer[led.driver][led.r - 0x24]   = red;
+        g_pwm_buffer[led.driver][led.g - 0x24]   = green;
+        g_pwm_buffer[led.driver][led.b - 0x24]   = blue;
         g_pwm_buffer_update_required[led.driver] = true;
     }
 }
 
-void IS31FL3731_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
-{
-    for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
-    {
-        IS31FL3731_set_color( i, red, green, blue );
+void IS31FL3731_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
+    for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+        IS31FL3731_set_color(i, red, green, blue);
     }
 }
 
-void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
-{
+void IS31FL3731_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
     is31_led led = g_is31_leds[index];
 
     uint8_t control_register_r = (led.r - 0x24) / 8;
     uint8_t control_register_g = (led.g - 0x24) / 8;
     uint8_t control_register_b = (led.b - 0x24) / 8;
-    uint8_t bit_r = (led.r - 0x24) % 8;
-    uint8_t bit_g = (led.g - 0x24) % 8;
-    uint8_t bit_b = (led.b - 0x24) % 8;
+    uint8_t bit_r              = (led.r - 0x24) % 8;
+    uint8_t bit_g              = (led.g - 0x24) % 8;
+    uint8_t bit_b              = (led.b - 0x24) % 8;
 
-    if ( red ) {
+    if (red) {
         g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
     } else {
         g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
     }
-    if ( green ) {
+    if (green) {
         g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
     } else {
         g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
     }
-    if ( blue ) {
+    if (blue) {
         g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
     } else {
         g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
     }
 
     g_led_control_registers_update_required[led.driver] = true;
-
 }
 
-void IS31FL3731_update_pwm_buffers( uint8_t addr, uint8_t index )
-{
-    if ( g_pwm_buffer_update_required[index] )
-    {
-        IS31FL3731_write_pwm_buffer( addr, g_pwm_buffer[index] );
+void IS31FL3731_update_pwm_buffers(uint8_t addr, uint8_t index) {
+    if (g_pwm_buffer_update_required[index]) {
+        IS31FL3731_write_pwm_buffer(addr, g_pwm_buffer[index]);
     }
     g_pwm_buffer_update_required[index] = false;
 }
 
-void IS31FL3731_update_led_control_registers( uint8_t addr, uint8_t index )
-{
-    if ( g_led_control_registers_update_required[index] )
-    {
-        for ( int i=0; i<18; i++ )
-        {
-            IS31FL3731_write_register( addr, i, g_led_control_registers[index][i] );
+void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index) {
+    if (g_led_control_registers_update_required[index]) {
+        for (int i = 0; i < 18; i++) {
+            IS31FL3731_write_register(addr, i, g_led_control_registers[index][i]);
         }
     }
 }
diff --git a/drivers/issi/is31fl3731.h b/drivers/issi/is31fl3731.h
index 968638f86a..6a7a45d8ff 100644
--- a/drivers/issi/is31fl3731.h
+++ b/drivers/issi/is31fl3731.h
@@ -15,7 +15,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-
 #ifndef IS31FL3731_DRIVER_H
 #define IS31FL3731_DRIVER_H
 
@@ -23,40 +22,40 @@
 #include <stdbool.h>
 
 typedef struct is31_led {
-  uint8_t driver:2;
-  uint8_t r;
-  uint8_t g;
-  uint8_t b;
+    uint8_t driver : 2;
+    uint8_t r;
+    uint8_t g;
+    uint8_t b;
 } __attribute__((packed)) is31_led;
 
 extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
 
-void IS31FL3731_init( uint8_t addr );
-void IS31FL3731_write_register( uint8_t addr, uint8_t reg, uint8_t data );
-void IS31FL3731_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
+void IS31FL3731_init(uint8_t addr);
+void IS31FL3731_write_register(uint8_t addr, uint8_t reg, uint8_t data);
+void IS31FL3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer);
 
-void IS31FL3731_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
-void IS31FL3731_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3731_set_color(int index, uint8_t red, uint8_t green, uint8_t blue);
+void IS31FL3731_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
 
-void IS31FL3731_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
+void IS31FL3731_set_led_control_register(uint8_t index, bool red, bool green, bool blue);
 
 // This should not be called from an interrupt
 // (eg. from a timer interrupt).
 // Call this while idle (in between matrix scans).
 // If the buffer is dirty, it will update the driver with the buffer.
-void IS31FL3731_update_pwm_buffers( uint8_t addr, uint8_t index  );
-void IS31FL3731_update_led_control_registers( uint8_t addr, uint8_t index );
-
-#define C1_1  0x24
-#define C1_2  0x25
-#define C1_3  0x26
-#define C1_4  0x27
-#define C1_5  0x28
-#define C1_6  0x29
-#define C1_7  0x2A
-#define C1_8  0x2B
-
-#define C1_9  0x2C
+void IS31FL3731_update_pwm_buffers(uint8_t addr, uint8_t index);
+void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
+
+#define C1_1 0x24
+#define C1_2 0x25
+#define C1_3 0x26
+#define C1_4 0x27
+#define C1_5 0x28
+#define C1_6 0x29
+#define C1_7 0x2A
+#define C1_8 0x2B
+
+#define C1_9 0x2C
 #define C1_10 0x2D
 #define C1_11 0x2E
 #define C1_12 0x2F
@@ -65,16 +64,16 @@ void IS31FL3731_update_led_control_registers( uint8_t addr, uint8_t index );
 #define C1_15 0x32
 #define C1_16 0x33
 
-#define C2_1  0x34
-#define C2_2  0x35
-#define C2_3  0x36
-#define C2_4  0x37
-#define C2_5  0x38
-#define C2_6  0x39
-#define C2_7  0x3A
-#define C2_8  0x3B
+#define C2_1 0x34
+#define C2_2 0x35
+#define C2_3 0x36
+#define C2_4 0x37
+#define C2_5 0x38
+#define C2_6 0x39
+#define C2_7 0x3A
+#define C2_8 0x3B
 
-#define C2_9  0x3C
+#define C2_9 0x3C
 #define C2_10 0x3D
 #define C2_11 0x3E
 #define C2_12 0x3F
@@ -83,16 +82,16 @@ void IS31FL3731_update_led_control_registers( uint8_t addr, uint8_t index );
 #define C2_15 0x42
 #define C2_16 0x43
 
-#define C3_1  0x44
-#define C3_2  0x45
-#define C3_3  0x46
-#define C3_4  0x47
-#define C3_5  0x48
-#define C3_6  0x49
-#define C3_7  0x4A
-#define C3_8  0x4B
+#define C3_1 0x44
+#define C3_2 0x45
+#define C3_3 0x46
+#define C3_4 0x47
+#define C3_5 0x48
+#define C3_6 0x49
+#define C3_7 0x4A
+#define C3_8 0x4B
 
-#define C3_9  0x4C
+#define C3_9 0x4C
 #define C3_10 0x4D
 #define C3_11 0x4E
 #define C3_12 0x4F
@@ -101,16 +100,16 @@ void IS31FL3731_update_led_control_registers( uint8_t addr, uint8_t index );
 #define C3_15 0x52
 #define C3_16 0x53
 
-#define C4_1  0x54
-#define C4_2  0x55
-#define C4_3  0x56
-#define C4_4  0x57
-#define C4_5  0x58
-#define C4_6  0x59
-#define C4_7  0x5A
-#define C4_8  0x5B
+#define C4_1 0x54
+#define C4_2 0x55
+#define C4_3 0x56
+#define C4_4 0x57
+#define C4_5 0x58
+#define C4_6 0x59
+#define C4_7 0x5A
+#define C4_8 0x5B
 
-#define C4_9  0x5C
+#define C4_9 0x5C
 #define C4_10 0x5D
 #define C4_11 0x5E
 #define C4_12 0x5F
@@ -119,16 +118,16 @@ void IS31FL3731_update_led_control_registers( uint8_t addr, uint8_t index );
 #define C4_15 0x62
 #define C4_16 0x63
 
-#define C5_1  0x64
-#define C5_2  0x65
-#define C5_3  0x66
-#define C5_4  0x67
-#define C5_5  0x68
-#define C5_6  0x69
-#define C5_7  0x6A
-#define C5_8  0x6B
+#define C5_1 0x64
+#define C5_2 0x65
+#define C5_3 0x66
+#define C5_4 0x67
+#define C5_5 0x68
+#define C5_6 0x69
+#define C5_7 0x6A
+#define C5_8 0x6B
 
-#define C5_9  0x6C
+#define C5_9 0x6C
 #define C5_10 0x6D
 #define C5_11 0x6E
 #define C5_12 0x6F
@@ -137,16 +136,16 @@ void IS31FL3731_update_led_control_registers( uint8_t addr, uint8_t index );
 #define C5_15 0x72
 #define C5_16 0x73
 
-#define C6_1  0x74
-#define C6_2  0x75
-#define C6_3  0x76
-#define C6_4  0x77
-#define C6_5  0x78
-#define C6_6  0x79
-#define C6_7  0x7A
-#define C6_8  0x7B
+#define C6_1 0x74
+#define C6_2 0x75
+#define C6_3 0x76
+#define C6_4 0x77
+#define C6_5 0x78
+#define C6_6 0x79
+#define C6_7 0x7A
+#define C6_8 0x7B
 
-#define C6_9  0x7C
+#define C6_9 0x7C
 #define C6_10 0x7D
 #define C6_11 0x7E
 #define C6_12 0x7F
@@ -155,16 +154,16 @@ void IS31FL3731_update_led_control_registers( uint8_t addr, uint8_t index );
 #define C6_15 0x82
 #define C6_16 0x83
 
-#define C7_1  0x84
-#define C7_2  0x85
-#define C7_3  0x86
-#define C7_4  0x87
-#define C7_5  0x88
-#define C7_6  0x89
-#define C7_7  0x8A
-#define C7_8  0x8B
+#define C7_1 0x84
+#define C7_2 0x85
+#define C7_3 0x86
+#define C7_4 0x87
+#define C7_5 0x88
+#define C7_6 0x89
+#define C7_7 0x8A
+#define C7_8 0x8B
 
-#define C7_9  0x8C
+#define C7_9 0x8C
 #define C7_10 0x8D
 #define C7_11 0x8E
 #define C7_12 0x8F
@@ -173,16 +172,16 @@ void IS31FL3731_update_led_control_registers( uint8_t addr, uint8_t index );
 #define C7_15 0x92
 #define C7_16 0x93
 
-#define C8_1  0x94
-#define C8_2  0x95
-#define C8_3  0x96
-#define C8_4  0x97
-#define C8_5  0x98
-#define C8_6  0x99
-#define C8_7  0x9A
-#define C8_8  0x9B
+#define C8_1 0x94
+#define C8_2 0x95
+#define C8_3 0x96
+#define C8_4 0x97
+#define C8_5 0x98
+#define C8_6 0x99
+#define C8_7 0x9A
+#define C8_8 0x9B
 
-#define C8_9  0x9C
+#define C8_9 0x9C
 #define C8_10 0x9D
 #define C8_11 0x9E
 #define C8_12 0x9F
@@ -191,16 +190,16 @@ void IS31FL3731_update_led_control_registers( uint8_t addr, uint8_t index );
 #define C8_15 0xA2
 #define C8_16 0xA3
 
-#define C9_1  0xA4
-#define C9_2  0xA5
-#define C9_3  0xA6
-#define C9_4  0xA7
-#define C9_5  0xA8
-#define C9_6  0xA9
-#define C9_7  0xAA
-#define C9_8  0xAB
+#define C9_1 0xA4
+#define C9_2 0xA5
+#define C9_3 0xA6
+#define C9_4 0xA7
+#define C9_5 0xA8
+#define C9_6 0xA9
+#define C9_7 0xAA
+#define C9_8 0xAB
 
-#define C9_9  0xAC
+#define C9_9 0xAC
 #define C9_10 0xAD
 #define C9_11 0xAE
 #define C9_12 0xAF
@@ -209,6 +208,4 @@ void IS31FL3731_update_led_control_registers( uint8_t addr, uint8_t index );
 #define C9_15 0xB2
 #define C9_16 0xB3
 
-
-
-#endif // IS31FL3731_DRIVER_H
+#endif  // IS31FL3731_DRIVER_H
diff --git a/drivers/issi/is31fl3733.c b/drivers/issi/is31fl3733.c
index aa247f4e8a..968f072de8 100644
--- a/drivers/issi/is31fl3733.c
+++ b/drivers/issi/is31fl3733.c
@@ -17,11 +17,11 @@
  */
 
 #ifdef __AVR__
-#include <avr/interrupt.h>
-#include <avr/io.h>
-#include <util/delay.h>
+#    include <avr/interrupt.h>
+#    include <avr/io.h>
+#    include <util/delay.h>
 #else
-#include "wait.h"
+#    include "wait.h"
 #endif
 
 #include "is31fl3733.h"
@@ -46,23 +46,23 @@
 #define ISSI_INTERRUPTMASKREGISTER 0xF0
 #define ISSI_INTERRUPTSTATUSREGISTER 0xF1
 
-#define ISSI_PAGE_LEDCONTROL 0x00 //PG0
-#define ISSI_PAGE_PWM 0x01        //PG1
-#define ISSI_PAGE_AUTOBREATH 0x02 //PG2
-#define ISSI_PAGE_FUNCTION 0x03   //PG3
+#define ISSI_PAGE_LEDCONTROL 0x00  // PG0
+#define ISSI_PAGE_PWM 0x01         // PG1
+#define ISSI_PAGE_AUTOBREATH 0x02  // PG2
+#define ISSI_PAGE_FUNCTION 0x03    // PG3
 
-#define ISSI_REG_CONFIGURATION 0x00 //PG3
-#define ISSI_REG_GLOBALCURRENT 0x01 //PG3
-#define ISSI_REG_RESET 0x11// PG3
-#define ISSI_REG_SWPULLUP 0x0F //PG3
-#define ISSI_REG_CSPULLUP 0x10 //PG3
+#define ISSI_REG_CONFIGURATION 0x00  // PG3
+#define ISSI_REG_GLOBALCURRENT 0x01  // PG3
+#define ISSI_REG_RESET 0x11          // PG3
+#define ISSI_REG_SWPULLUP 0x0F       // PG3
+#define ISSI_REG_CSPULLUP 0x10       // PG3
 
 #ifndef ISSI_TIMEOUT
-  #define ISSI_TIMEOUT 100
+#    define ISSI_TIMEOUT 100
 #endif
 
 #ifndef ISSI_PERSISTENCE
-  #define ISSI_PERSISTENCE 0
+#    define ISSI_PERSISTENCE 0
 #endif
 
 // Transfer buffer for TWITransmitData()
@@ -75,56 +75,51 @@ uint8_t g_twi_transfer_buffer[20];
 // buffers and the transfers in IS31FL3733_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
 uint8_t g_pwm_buffer[DRIVER_COUNT][192];
-bool g_pwm_buffer_update_required[DRIVER_COUNT] = { false };
+bool    g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
 
-uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 }, { 0 } };
-bool g_led_control_registers_update_required[DRIVER_COUNT] = { false };
+uint8_t g_led_control_registers[DRIVER_COUNT][24]             = {{0}, {0}};
+bool    g_led_control_registers_update_required[DRIVER_COUNT] = {false};
 
-void IS31FL3733_write_register( uint8_t addr, uint8_t reg, uint8_t data )
-{
+void IS31FL3733_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
     g_twi_transfer_buffer[0] = reg;
     g_twi_transfer_buffer[1] = data;
 
-  #if ISSI_PERSISTENCE > 0
+#if ISSI_PERSISTENCE > 0
     for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-      if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
-        break;
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) break;
     }
-  #else
+#else
     i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
-  #endif
+#endif
 }
 
-void IS31FL3733_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
-{
+void IS31FL3733_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
     // assumes PG1 is already selected
 
     // transmit PWM registers in 12 transfers of 16 bytes
     // g_twi_transfer_buffer[] is 20 bytes
 
     // iterate over the pwm_buffer contents at 16 byte intervals
-    for ( int i = 0; i < 192; i += 16 ) {
+    for (int i = 0; i < 192; i += 16) {
         g_twi_transfer_buffer[0] = i;
         // copy the data from i to i+15
         // device will auto-increment register for data after the first byte
         // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
-        for ( int j = 0; j < 16; j++ ) {
+        for (int j = 0; j < 16; j++) {
             g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
         }
 
-    #if ISSI_PERSISTENCE > 0
-      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
-          break;
-      }
-    #else
-      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
-    #endif
+#if ISSI_PERSISTENCE > 0
+        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0) break;
+        }
+#else
+        i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+#endif
     }
 }
 
-void IS31FL3733_init( uint8_t addr, uint8_t sync)
-{
+void IS31FL3733_init(uint8_t addr, uint8_t sync) {
     // In order to avoid the LEDs being driven with garbage data
     // in the LED driver's PWM registers, shutdown is enabled last.
     // Set up the mode and other settings, clear the PWM registers,
@@ -132,120 +127,108 @@ void IS31FL3733_init( uint8_t addr, uint8_t sync)
     // Sync is passed so set it according to the datasheet.
 
     // Unlock the command register.
-    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+    IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG0
-    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+    IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
     // Turn off all LEDs.
-    for ( int i = 0x00; i <= 0x17; i++ )
-    {
-        IS31FL3733_write_register( addr, i, 0x00 );
+    for (int i = 0x00; i <= 0x17; i++) {
+        IS31FL3733_write_register(addr, i, 0x00);
     }
 
     // Unlock the command register.
-    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+    IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG1
-    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+    IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
     // Set PWM on all LEDs to 0
     // No need to setup Breath registers to PWM as that is the default.
-    for ( int i = 0x00; i <= 0xBF; i++ )
-    {
-        IS31FL3733_write_register( addr, i, 0x00 );
+    for (int i = 0x00; i <= 0xBF; i++) {
+        IS31FL3733_write_register(addr, i, 0x00);
     }
 
     // Unlock the command register.
-    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+    IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG3
-    IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION );
+    IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
     // Set global current to maximum.
-    IS31FL3733_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF );
+    IS31FL3733_write_register(addr, ISSI_REG_GLOBALCURRENT, 0xFF);
     // Disable software shutdown.
-    IS31FL3733_write_register( addr, ISSI_REG_CONFIGURATION, (sync << 6) | 0x01 );
+    IS31FL3733_write_register(addr, ISSI_REG_CONFIGURATION, (sync << 6) | 0x01);
 
-    // Wait 10ms to ensure the device has woken up.
-    #ifdef __AVR__
-    _delay_ms( 10 );
-    #else
+// Wait 10ms to ensure the device has woken up.
+#ifdef __AVR__
+    _delay_ms(10);
+#else
     wait_ms(10);
-    #endif
+#endif
 }
 
-void IS31FL3733_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
-{
-    if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
+void IS31FL3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
+    if (index >= 0 && index < DRIVER_LED_TOTAL) {
         is31_led led = g_is31_leds[index];
 
-        g_pwm_buffer[led.driver][led.r] = red;
-        g_pwm_buffer[led.driver][led.g] = green;
-        g_pwm_buffer[led.driver][led.b] = blue;
+        g_pwm_buffer[led.driver][led.r]          = red;
+        g_pwm_buffer[led.driver][led.g]          = green;
+        g_pwm_buffer[led.driver][led.b]          = blue;
         g_pwm_buffer_update_required[led.driver] = true;
     }
 }
 
-void IS31FL3733_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
-{
-    for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
-    {
-        IS31FL3733_set_color( i, red, green, blue );
+void IS31FL3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
+    for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+        IS31FL3733_set_color(i, red, green, blue);
     }
 }
 
-void IS31FL3733_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
-{
+void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
     is31_led led = g_is31_leds[index];
 
-  uint8_t control_register_r = led.r / 8;
-  uint8_t control_register_g = led.g / 8;
-  uint8_t control_register_b = led.b / 8;
-  uint8_t bit_r = led.r % 8;
-  uint8_t bit_g = led.g % 8;
-  uint8_t bit_b = led.b % 8;
+    uint8_t control_register_r = led.r / 8;
+    uint8_t control_register_g = led.g / 8;
+    uint8_t control_register_b = led.b / 8;
+    uint8_t bit_r              = led.r % 8;
+    uint8_t bit_g              = led.g % 8;
+    uint8_t bit_b              = led.b % 8;
 
-    if ( red ) {
+    if (red) {
         g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
     } else {
         g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
     }
-    if ( green ) {
+    if (green) {
         g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
     } else {
         g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
     }
-    if ( blue ) {
+    if (blue) {
         g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
     } else {
         g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
     }
 
     g_led_control_registers_update_required[led.driver] = true;
-
 }
 
-void IS31FL3733_update_pwm_buffers( uint8_t addr, uint8_t index )
-{
-    if ( g_pwm_buffer_update_required[index] )
-    {
+void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
+    if (g_pwm_buffer_update_required[index]) {
         // Firstly we need to unlock the command register and select PG1
-        IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
-        IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+        IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+        IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
 
-        IS31FL3733_write_pwm_buffer( addr, g_pwm_buffer[index] );
+        IS31FL3733_write_pwm_buffer(addr, g_pwm_buffer[index]);
     }
     g_pwm_buffer_update_required[index] = false;
 }
 
-void IS31FL3733_update_led_control_registers( uint8_t addr, uint8_t index )
-{
-    if ( g_led_control_registers_update_required[index] )
-    {
+void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index) {
+    if (g_led_control_registers_update_required[index]) {
         // Firstly we need to unlock the command register and select PG0
-        IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
-        IS31FL3733_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
-        for ( int i=0; i<24; i++ )
-        {
-            IS31FL3733_write_register(addr, i, g_led_control_registers[index][i] );
+        IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+        IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+        for (int i = 0; i < 24; i++) {
+            IS31FL3733_write_register(addr, i, g_led_control_registers[index][i]);
         }
     }
     g_led_control_registers_update_required[index] = false;
diff --git a/drivers/issi/is31fl3733.h b/drivers/issi/is31fl3733.h
index e117b25460..5b3283e035 100644
--- a/drivers/issi/is31fl3733.h
+++ b/drivers/issi/is31fl3733.h
@@ -16,7 +16,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-
 #ifndef IS31FL3733_DRIVER_H
 #define IS31FL3733_DRIVER_H
 
@@ -24,232 +23,232 @@
 #include <stdbool.h>
 
 typedef struct is31_led {
-  uint8_t driver:2;
-  uint8_t r;
-  uint8_t g;
-  uint8_t b;
+    uint8_t driver : 2;
+    uint8_t r;
+    uint8_t g;
+    uint8_t b;
 } __attribute__((packed)) is31_led;
 
 extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
 
-void IS31FL3733_init( uint8_t addr, uint8_t sync );
-void IS31FL3733_write_register( uint8_t addr, uint8_t reg, uint8_t data );
-void IS31FL3733_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
+void IS31FL3733_init(uint8_t addr, uint8_t sync);
+void IS31FL3733_write_register(uint8_t addr, uint8_t reg, uint8_t data);
+void IS31FL3733_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer);
 
-void IS31FL3733_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
-void IS31FL3733_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue);
+void IS31FL3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
 
-void IS31FL3733_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
+void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bool blue);
 
 // This should not be called from an interrupt
 // (eg. from a timer interrupt).
 // Call this while idle (in between matrix scans).
 // If the buffer is dirty, it will update the driver with the buffer.
-void IS31FL3733_update_pwm_buffers( uint8_t addr, uint8_t index );
-void IS31FL3733_update_led_control_registers( uint8_t addr, uint8_t index );
-
-#define A_1  0x00
-#define A_2  0x01
-#define A_3  0x02
-#define A_4  0x03
-#define A_5  0x04
-#define A_6  0x05
-#define A_7  0x06
-#define A_8  0x07
-#define A_9  0x08
-#define A_10  0x09
-#define A_11  0x0A
-#define A_12  0x0B
-#define A_13  0x0C
-#define A_14  0x0D
-#define A_15  0x0E
-#define A_16  0x0F
-
-#define B_1  0x10
-#define B_2  0x11
-#define B_3  0x12
-#define B_4  0x13
-#define B_5  0x14
-#define B_6  0x15
-#define B_7  0x16
-#define B_8  0x17
-#define B_9  0x18
-#define B_10  0x19
-#define B_11  0x1A
-#define B_12  0x1B
-#define B_13  0x1C
-#define B_14  0x1D
-#define B_15  0x1E
-#define B_16  0x1F
-
-#define C_1  0x20
-#define C_2  0x21
-#define C_3  0x22
-#define C_4  0x23
-#define C_5  0x24
-#define C_6  0x25
-#define C_7  0x26
-#define C_8  0x27
-#define C_9  0x28
-#define C_10  0x29
-#define C_11  0x2A
-#define C_12  0x2B
-#define C_13  0x2C
-#define C_14  0x2D
-#define C_15  0x2E
-#define C_16  0x2F
-
-#define D_1  0x30
-#define D_2  0x31
-#define D_3  0x32
-#define D_4  0x33
-#define D_5  0x34
-#define D_6  0x35
-#define D_7  0x36
-#define D_8  0x37
-#define D_9  0x38
-#define D_10  0x39
-#define D_11  0x3A
-#define D_12  0x3B
-#define D_13  0x3C
-#define D_14  0x3D
-#define D_15  0x3E
-#define D_16  0x3F
-
-#define E_1  0x40
-#define E_2  0x41
-#define E_3  0x42
-#define E_4  0x43
-#define E_5  0x44
-#define E_6  0x45
-#define E_7  0x46
-#define E_8  0x47
-#define E_9  0x48
-#define E_10  0x49
-#define E_11  0x4A
-#define E_12  0x4B
-#define E_13  0x4C
-#define E_14  0x4D
-#define E_15  0x4E
-#define E_16  0x4F
-
-#define F_1  0x50
-#define F_2  0x51
-#define F_3  0x52
-#define F_4  0x53
-#define F_5  0x54
-#define F_6  0x55
-#define F_7  0x56
-#define F_8  0x57
-#define F_9  0x58
-#define F_10  0x59
-#define F_11  0x5A
-#define F_12  0x5B
-#define F_13  0x5C
-#define F_14  0x5D
-#define F_15  0x5E
-#define F_16  0x5F
-
-#define G_1  0x60
-#define G_2  0x61
-#define G_3  0x62
-#define G_4  0x63
-#define G_5  0x64
-#define G_6  0x65
-#define G_7  0x66
-#define G_8  0x67
-#define G_9  0x68
-#define G_10  0x69
-#define G_11  0x6A
-#define G_12  0x6B
-#define G_13  0x6C
-#define G_14  0x6D
-#define G_15  0x6E
-#define G_16  0x6F
-
-#define H_1  0x70
-#define H_2  0x71
-#define H_3  0x72
-#define H_4  0x73
-#define H_5  0x74
-#define H_6  0x75
-#define H_7  0x76
-#define H_8  0x77
-#define H_9  0x78
-#define H_10  0x79
-#define H_11  0x7A
-#define H_12  0x7B
-#define H_13  0x7C
-#define H_14  0x7D
-#define H_15  0x7E
-#define H_16  0x7F
-
-#define I_1  0x80
-#define I_2  0x81
-#define I_3  0x82
-#define I_4  0x83
-#define I_5  0x84
-#define I_6  0x85
-#define I_7  0x86
-#define I_8  0x87
-#define I_9  0x88
-#define I_10  0x89
-#define I_11  0x8A
-#define I_12  0x8B
-#define I_13  0x8C
-#define I_14  0x8D
-#define I_15  0x8E
-#define I_16  0x8F
-
-#define J_1  0x90
-#define J_2  0x91
-#define J_3  0x92
-#define J_4  0x93
-#define J_5  0x94
-#define J_6  0x95
-#define J_7  0x96
-#define J_8  0x97
-#define J_9  0x98
-#define J_10  0x99
-#define J_11  0x9A
-#define J_12  0x9B
-#define J_13  0x9C
-#define J_14  0x9D
-#define J_15  0x9E
-#define J_16  0x9F
-
-#define K_1  0xA0
-#define K_2  0xA1
-#define K_3  0xA2
-#define K_4  0xA3
-#define K_5  0xA4
-#define K_6  0xA5
-#define K_7  0xA6
-#define K_8  0xA7
-#define K_9  0xA8
-#define K_10  0xA9
-#define K_11  0xAA
-#define K_12  0xAB
-#define K_13  0xAC
-#define K_14  0xAD
-#define K_15  0xAE
-#define K_16  0xAF
-
-#define L_1  0xB0
-#define L_2  0xB1
-#define L_3  0xB2
-#define L_4  0xB3
-#define L_5  0xB4
-#define L_6  0xB5
-#define L_7  0xB6
-#define L_8  0xB7
-#define L_9  0xB8
-#define L_10  0xB9
-#define L_11  0xBA
-#define L_12  0xBB
-#define L_13  0xBC
-#define L_14  0xBD
-#define L_15  0xBE
-#define L_16  0xBF
-
-#endif // IS31FL3733_DRIVER_H
+void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index);
+void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index);
+
+#define A_1 0x00
+#define A_2 0x01
+#define A_3 0x02
+#define A_4 0x03
+#define A_5 0x04
+#define A_6 0x05
+#define A_7 0x06
+#define A_8 0x07
+#define A_9 0x08
+#define A_10 0x09
+#define A_11 0x0A
+#define A_12 0x0B
+#define A_13 0x0C
+#define A_14 0x0D
+#define A_15 0x0E
+#define A_16 0x0F
+
+#define B_1 0x10
+#define B_2 0x11
+#define B_3 0x12
+#define B_4 0x13
+#define B_5 0x14
+#define B_6 0x15
+#define B_7 0x16
+#define B_8 0x17
+#define B_9 0x18
+#define B_10 0x19
+#define B_11 0x1A
+#define B_12 0x1B
+#define B_13 0x1C
+#define B_14 0x1D
+#define B_15 0x1E
+#define B_16 0x1F
+
+#define C_1 0x20
+#define C_2 0x21
+#define C_3 0x22
+#define C_4 0x23
+#define C_5 0x24
+#define C_6 0x25
+#define C_7 0x26
+#define C_8 0x27
+#define C_9 0x28
+#define C_10 0x29
+#define C_11 0x2A
+#define C_12 0x2B
+#define C_13 0x2C
+#define C_14 0x2D
+#define C_15 0x2E
+#define C_16 0x2F
+
+#define D_1 0x30
+#define D_2 0x31
+#define D_3 0x32
+#define D_4 0x33
+#define D_5 0x34
+#define D_6 0x35
+#define D_7 0x36
+#define D_8 0x37
+#define D_9 0x38
+#define D_10 0x39
+#define D_11 0x3A
+#define D_12 0x3B
+#define D_13 0x3C
+#define D_14 0x3D
+#define D_15 0x3E
+#define D_16 0x3F
+
+#define E_1 0x40
+#define E_2 0x41
+#define E_3 0x42
+#define E_4 0x43
+#define E_5 0x44
+#define E_6 0x45
+#define E_7 0x46
+#define E_8 0x47
+#define E_9 0x48
+#define E_10 0x49
+#define E_11 0x4A
+#define E_12 0x4B
+#define E_13 0x4C
+#define E_14 0x4D
+#define E_15 0x4E
+#define E_16 0x4F
+
+#define F_1 0x50
+#define F_2 0x51
+#define F_3 0x52
+#define F_4 0x53
+#define F_5 0x54
+#define F_6 0x55
+#define F_7 0x56
+#define F_8 0x57
+#define F_9 0x58
+#define F_10 0x59
+#define F_11 0x5A
+#define F_12 0x5B
+#define F_13 0x5C
+#define F_14 0x5D
+#define F_15 0x5E
+#define F_16 0x5F
+
+#define G_1 0x60
+#define G_2 0x61
+#define G_3 0x62
+#define G_4 0x63
+#define G_5 0x64
+#define G_6 0x65
+#define G_7 0x66
+#define G_8 0x67
+#define G_9 0x68
+#define G_10 0x69
+#define G_11 0x6A
+#define G_12 0x6B
+#define G_13 0x6C
+#define G_14 0x6D
+#define G_15 0x6E
+#define G_16 0x6F
+
+#define H_1 0x70
+#define H_2 0x71
+#define H_3 0x72
+#define H_4 0x73
+#define H_5 0x74
+#define H_6 0x75
+#define H_7 0x76
+#define H_8 0x77
+#define H_9 0x78
+#define H_10 0x79
+#define H_11 0x7A
+#define H_12 0x7B
+#define H_13 0x7C
+#define H_14 0x7D
+#define H_15 0x7E
+#define H_16 0x7F
+
+#define I_1 0x80
+#define I_2 0x81
+#define I_3 0x82
+#define I_4 0x83
+#define I_5 0x84
+#define I_6 0x85
+#define I_7 0x86
+#define I_8 0x87
+#define I_9 0x88
+#define I_10 0x89
+#define I_11 0x8A
+#define I_12 0x8B
+#define I_13 0x8C
+#define I_14 0x8D
+#define I_15 0x8E
+#define I_16 0x8F
+
+#define J_1 0x90
+#define J_2 0x91
+#define J_3 0x92
+#define J_4 0x93
+#define J_5 0x94
+#define J_6 0x95
+#define J_7 0x96
+#define J_8 0x97
+#define J_9 0x98
+#define J_10 0x99
+#define J_11 0x9A
+#define J_12 0x9B
+#define J_13 0x9C
+#define J_14 0x9D
+#define J_15 0x9E
+#define J_16 0x9F
+
+#define K_1 0xA0
+#define K_2 0xA1
+#define K_3 0xA2
+#define K_4 0xA3
+#define K_5 0xA4
+#define K_6 0xA5
+#define K_7 0xA6
+#define K_8 0xA7
+#define K_9 0xA8
+#define K_10 0xA9
+#define K_11 0xAA
+#define K_12 0xAB
+#define K_13 0xAC
+#define K_14 0xAD
+#define K_15 0xAE
+#define K_16 0xAF
+
+#define L_1 0xB0
+#define L_2 0xB1
+#define L_3 0xB2
+#define L_4 0xB3
+#define L_5 0xB4
+#define L_6 0xB5
+#define L_7 0xB6
+#define L_8 0xB7
+#define L_9 0xB8
+#define L_10 0xB9
+#define L_11 0xBA
+#define L_12 0xBB
+#define L_13 0xBC
+#define L_14 0xBD
+#define L_15 0xBE
+#define L_16 0xBF
+
+#endif  // IS31FL3733_DRIVER_H
diff --git a/drivers/issi/is31fl3736.c b/drivers/issi/is31fl3736.c
index c5d4310971..754292425e 100644
--- a/drivers/issi/is31fl3736.c
+++ b/drivers/issi/is31fl3736.c
@@ -14,13 +14,12 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-
 #ifdef __AVR__
-#include <avr/interrupt.h>
-#include <avr/io.h>
-#include <util/delay.h>
+#    include <avr/interrupt.h>
+#    include <avr/io.h>
+#    include <util/delay.h>
 #else
-#include "wait.h"
+#    include "wait.h"
 #endif
 
 #include "is31fl3736.h"
@@ -28,8 +27,6 @@
 #include "i2c_master.h"
 #include "progmem.h"
 
-
-
 // This is a 7-bit address, that gets left-shifted and bit 0
 // set to 0 for write, 1 for read (as per I2C protocol)
 // The address will vary depending on your wiring:
@@ -47,23 +44,23 @@
 #define ISSI_INTERRUPTMASKREGISTER 0xF0
 #define ISSI_INTERRUPTSTATUSREGISTER 0xF1
 
-#define ISSI_PAGE_LEDCONTROL 0x00 //PG0
-#define ISSI_PAGE_PWM 0x01        //PG1
-#define ISSI_PAGE_AUTOBREATH 0x02 //PG2
-#define ISSI_PAGE_FUNCTION 0x03   //PG3
+#define ISSI_PAGE_LEDCONTROL 0x00  // PG0
+#define ISSI_PAGE_PWM 0x01         // PG1
+#define ISSI_PAGE_AUTOBREATH 0x02  // PG2
+#define ISSI_PAGE_FUNCTION 0x03    // PG3
 
-#define ISSI_REG_CONFIGURATION 0x00 //PG3
-#define ISSI_REG_GLOBALCURRENT 0x01 //PG3
-#define ISSI_REG_RESET 0x11// PG3
-#define ISSI_REG_SWPULLUP 0x0F //PG3
-#define ISSI_REG_CSPULLUP 0x10 //PG3
+#define ISSI_REG_CONFIGURATION 0x00  // PG3
+#define ISSI_REG_GLOBALCURRENT 0x01  // PG3
+#define ISSI_REG_RESET 0x11          // PG3
+#define ISSI_REG_SWPULLUP 0x0F       // PG3
+#define ISSI_REG_CSPULLUP 0x10       // PG3
 
 #ifndef ISSI_TIMEOUT
-  #define ISSI_TIMEOUT 100
+#    define ISSI_TIMEOUT 100
 #endif
 
 #ifndef ISSI_PERSISTENCE
-  #define ISSI_PERSISTENCE 0
+#    define ISSI_PERSISTENCE 0
 #endif
 
 // Transfer buffer for TWITransmitData()
@@ -76,124 +73,113 @@ uint8_t g_twi_transfer_buffer[20];
 // buffers and the transfers in IS31FL3736_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
 uint8_t g_pwm_buffer[DRIVER_COUNT][192];
-bool g_pwm_buffer_update_required = false;
+bool    g_pwm_buffer_update_required = false;
 
-uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 }, { 0 } };
-bool g_led_control_registers_update_required = false;
+uint8_t g_led_control_registers[DRIVER_COUNT][24] = {{0}, {0}};
+bool    g_led_control_registers_update_required   = false;
 
-void IS31FL3736_write_register( uint8_t addr, uint8_t reg, uint8_t data )
-{
+void IS31FL3736_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
     g_twi_transfer_buffer[0] = reg;
     g_twi_transfer_buffer[1] = data;
 
-  #if ISSI_PERSISTENCE > 0
+#if ISSI_PERSISTENCE > 0
     for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-      if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
-        break;
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) break;
     }
-  #else
+#else
     i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
-  #endif
+#endif
 }
 
-void IS31FL3736_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
-{
+void IS31FL3736_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
     // assumes PG1 is already selected
 
     // transmit PWM registers in 12 transfers of 16 bytes
     // g_twi_transfer_buffer[] is 20 bytes
 
     // iterate over the pwm_buffer contents at 16 byte intervals
-    for ( int i = 0; i < 192; i += 16 ) {
+    for (int i = 0; i < 192; i += 16) {
         g_twi_transfer_buffer[0] = i;
         // copy the data from i to i+15
         // device will auto-increment register for data after the first byte
         // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
-        for ( int j = 0; j < 16; j++ ) {
+        for (int j = 0; j < 16; j++) {
             g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
         }
 
-    #if ISSI_PERSISTENCE > 0
-      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
-          break;
-      }
-    #else
-      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
-    #endif
+#if ISSI_PERSISTENCE > 0
+        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0) break;
+        }
+#else
+        i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+#endif
     }
 }
 
-void IS31FL3736_init( uint8_t addr )
-{
+void IS31FL3736_init(uint8_t addr) {
     // In order to avoid the LEDs being driven with garbage data
     // in the LED driver's PWM registers, shutdown is enabled last.
     // Set up the mode and other settings, clear the PWM registers,
     // then disable software shutdown.
 
     // Unlock the command register.
-    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+    IS31FL3736_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG0
-    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+    IS31FL3736_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
     // Turn off all LEDs.
-    for ( int i = 0x00; i <= 0x17; i++ )
-    {
-        IS31FL3736_write_register( addr, i, 0x00 );
+    for (int i = 0x00; i <= 0x17; i++) {
+        IS31FL3736_write_register(addr, i, 0x00);
     }
 
     // Unlock the command register.
-    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+    IS31FL3736_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG1
-    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+    IS31FL3736_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
     // Set PWM on all LEDs to 0
     // No need to setup Breath registers to PWM as that is the default.
-    for ( int i = 0x00; i <= 0xBF; i++ )
-    {
-        IS31FL3736_write_register( addr, i, 0x00 );
+    for (int i = 0x00; i <= 0xBF; i++) {
+        IS31FL3736_write_register(addr, i, 0x00);
     }
 
     // Unlock the command register.
-    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+    IS31FL3736_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG3
-    IS31FL3736_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION );
+    IS31FL3736_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
     // Set global current to maximum.
-    IS31FL3736_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF );
+    IS31FL3736_write_register(addr, ISSI_REG_GLOBALCURRENT, 0xFF);
     // Disable software shutdown.
-    IS31FL3736_write_register( addr, ISSI_REG_CONFIGURATION, 0x01 );
+    IS31FL3736_write_register(addr, ISSI_REG_CONFIGURATION, 0x01);
 
-    // Wait 10ms to ensure the device has woken up.
-    #ifdef __AVR__
-    _delay_ms( 10 );
-    #else
+// Wait 10ms to ensure the device has woken up.
+#ifdef __AVR__
+    _delay_ms(10);
+#else
     wait_ms(10);
-    #endif
+#endif
 }
 
-void IS31FL3736_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
-{
-    if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
+void IS31FL3736_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
+    if (index >= 0 && index < DRIVER_LED_TOTAL) {
         is31_led led = g_is31_leds[index];
 
         g_pwm_buffer[led.driver][led.r] = red;
         g_pwm_buffer[led.driver][led.g] = green;
         g_pwm_buffer[led.driver][led.b] = blue;
-        g_pwm_buffer_update_required = true;
+        g_pwm_buffer_update_required    = true;
     }
 }
 
-void IS31FL3736_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
-{
-    for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
-    {
-        IS31FL3736_set_color( i, red, green, blue );
+void IS31FL3736_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
+    for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+        IS31FL3736_set_color(i, red, green, blue);
     }
 }
 
-void IS31FL3736_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
-{
+void IS31FL3736_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
     is31_led led = g_is31_leds[index];
 
     // IS31FL3733
@@ -209,64 +195,59 @@ void IS31FL3736_set_led_control_register( uint8_t index, bool red, bool green, b
     // A1-A4=0x00 A5-A8=0x01
     // So, the same math applies.
 
-	uint8_t control_register_r = led.r / 8;
-	uint8_t control_register_g = led.g / 8;
-	uint8_t control_register_b = led.b / 8;
+    uint8_t control_register_r = led.r / 8;
+    uint8_t control_register_g = led.g / 8;
+    uint8_t control_register_b = led.b / 8;
 
-	uint8_t bit_r = led.r % 8;
-	uint8_t bit_g = led.g % 8;
-	uint8_t bit_b = led.b % 8;
+    uint8_t bit_r = led.r % 8;
+    uint8_t bit_g = led.g % 8;
+    uint8_t bit_b = led.b % 8;
 
-    if ( red ) {
+    if (red) {
         g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
     } else {
         g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
     }
-    if ( green ) {
+    if (green) {
         g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
     } else {
         g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
     }
-    if ( blue ) {
+    if (blue) {
         g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
     } else {
         g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
     }
 
     g_led_control_registers_update_required = true;
-
 }
 
-void IS31FL3736_mono_set_brightness( int index, uint8_t value )
-{
-    if ( index >= 0 && index < 96 ) {
-    	// Index in range 0..95 -> A1..A8, B1..B8, etc.
-    	// Map index 0..95 to registers 0x00..0xBE (interleaved)
-    	uint8_t pwm_register = index * 2;
+void IS31FL3736_mono_set_brightness(int index, uint8_t value) {
+    if (index >= 0 && index < 96) {
+        // Index in range 0..95 -> A1..A8, B1..B8, etc.
+        // Map index 0..95 to registers 0x00..0xBE (interleaved)
+        uint8_t pwm_register          = index * 2;
         g_pwm_buffer[0][pwm_register] = value;
-        g_pwm_buffer_update_required = true;
+        g_pwm_buffer_update_required  = true;
     }
 }
 
-void IS31FL3736_mono_set_brightness_all( uint8_t value )
-{
-    for ( int i = 0; i < 96; i++ )
-    {
-    	IS31FL3736_mono_set_brightness( i, value );
+void IS31FL3736_mono_set_brightness_all(uint8_t value) {
+    for (int i = 0; i < 96; i++) {
+        IS31FL3736_mono_set_brightness(i, value);
     }
 }
 
-void IS31FL3736_mono_set_led_control_register( uint8_t index, bool enabled )
-{
-	// Index in range 0..95 -> A1..A8, B1..B8, etc.
+void IS31FL3736_mono_set_led_control_register(uint8_t index, bool enabled) {
+    // Index in range 0..95 -> A1..A8, B1..B8, etc.
 
-	// Map index 0..95 to registers 0x00..0xBE (interleaved)
-	uint8_t pwm_register = index * 2;
-	// Map register 0x00..0xBE (interleaved) into control register and bit
-	uint8_t control_register = pwm_register / 8;
-	uint8_t bit = pwm_register % 8;
+    // Map index 0..95 to registers 0x00..0xBE (interleaved)
+    uint8_t pwm_register = index * 2;
+    // Map register 0x00..0xBE (interleaved) into control register and bit
+    uint8_t control_register = pwm_register / 8;
+    uint8_t bit              = pwm_register % 8;
 
-    if ( enabled ) {
+    if (enabled) {
         g_led_control_registers[0][control_register] |= (1 << bit);
     } else {
         g_led_control_registers[0][control_register] &= ~(1 << bit);
@@ -275,32 +256,26 @@ void IS31FL3736_mono_set_led_control_register( uint8_t index, bool enabled )
     g_led_control_registers_update_required = true;
 }
 
-void IS31FL3736_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
-{
-    if ( g_pwm_buffer_update_required )
-    {
+void IS31FL3736_update_pwm_buffers(uint8_t addr1, uint8_t addr2) {
+    if (g_pwm_buffer_update_required) {
         // Firstly we need to unlock the command register and select PG1
-        IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
-        IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+        IS31FL3736_write_register(addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+        IS31FL3736_write_register(addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
 
-        IS31FL3736_write_pwm_buffer( addr1, g_pwm_buffer[0] );
-        //IS31FL3736_write_pwm_buffer( addr2, g_pwm_buffer[1] );
+        IS31FL3736_write_pwm_buffer(addr1, g_pwm_buffer[0]);
+        // IS31FL3736_write_pwm_buffer( addr2, g_pwm_buffer[1] );
     }
     g_pwm_buffer_update_required = false;
 }
 
-void IS31FL3736_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
-{
-    if ( g_led_control_registers_update_required )
-    {
+void IS31FL3736_update_led_control_registers(uint8_t addr1, uint8_t addr2) {
+    if (g_led_control_registers_update_required) {
         // Firstly we need to unlock the command register and select PG0
-        IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
-        IS31FL3736_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
-        for ( int i=0; i<24; i++ )
-        {
-            IS31FL3736_write_register(addr1, i, g_led_control_registers[0][i] );
-            //IS31FL3736_write_register(addr2, i, g_led_control_registers[1][i] );
+        IS31FL3736_write_register(addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+        IS31FL3736_write_register(addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+        for (int i = 0; i < 24; i++) {
+            IS31FL3736_write_register(addr1, i, g_led_control_registers[0][i]);
+            // IS31FL3736_write_register(addr2, i, g_led_control_registers[1][i] );
         }
     }
 }
-
diff --git a/drivers/issi/is31fl3736.h b/drivers/issi/is31fl3736.h
index cff50fd0d8..e48e31c279 100644
--- a/drivers/issi/is31fl3736.h
+++ b/drivers/issi/is31fl3736.h
@@ -19,154 +19,150 @@
 #include <stdint.h>
 #include <stdbool.h>
 
-
 // Simple interface option.
 // If these aren't defined, just define them to make it compile
 
-
 #ifndef DRIVER_COUNT
-#define DRIVER_COUNT 2
+#    define DRIVER_COUNT 2
 #endif
 
 #ifndef DRIVER_LED_TOTAL
-#define DRIVER_LED_TOTAL 96
+#    define DRIVER_LED_TOTAL 96
 #endif
 
-
 typedef struct is31_led {
-  uint8_t driver:2;
-  uint8_t r;
-  uint8_t g;
-  uint8_t b;
+    uint8_t driver : 2;
+    uint8_t r;
+    uint8_t g;
+    uint8_t b;
 } __attribute__((packed)) is31_led;
 
 extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
 
-void IS31FL3736_init( uint8_t addr );
-void IS31FL3736_write_register( uint8_t addr, uint8_t reg, uint8_t data );
-void IS31FL3736_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
+void IS31FL3736_init(uint8_t addr);
+void IS31FL3736_write_register(uint8_t addr, uint8_t reg, uint8_t data);
+void IS31FL3736_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer);
 
-void IS31FL3736_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
-void IS31FL3736_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3736_set_color(int index, uint8_t red, uint8_t green, uint8_t blue);
+void IS31FL3736_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
 
-void IS31FL3736_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
+void IS31FL3736_set_led_control_register(uint8_t index, bool red, bool green, bool blue);
 
-void IS31FL3736_mono_set_brightness( int index, uint8_t value );
-void IS31FL3736_mono_set_brightness_all( uint8_t value );
-void IS31FL3736_mono_set_led_control_register( uint8_t index, bool enabled );
+void IS31FL3736_mono_set_brightness(int index, uint8_t value);
+void IS31FL3736_mono_set_brightness_all(uint8_t value);
+void IS31FL3736_mono_set_led_control_register(uint8_t index, bool enabled);
 
 // This should not be called from an interrupt
 // (eg. from a timer interrupt).
 // Call this while idle (in between matrix scans).
 // If the buffer is dirty, it will update the driver with the buffer.
-void IS31FL3736_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
-void IS31FL3736_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
-
-#define A_1  0x00
-#define A_2  0x02
-#define A_3  0x04
-#define A_4  0x06
-#define A_5  0x08
-#define A_6  0x0A
-#define A_7  0x0C
-#define A_8  0x0E
-
-#define B_1  0x10
-#define B_2  0x12
-#define B_3  0x14
-#define B_4  0x16
-#define B_5  0x18
-#define B_6  0x1A
-#define B_7  0x1C
-#define B_8  0x1E
-
-#define C_1  0x20
-#define C_2  0x22
-#define C_3  0x24
-#define C_4  0x26
-#define C_5  0x28
-#define C_6  0x2A
-#define C_7  0x2C
-#define C_8  0x2E
-
-#define D_1  0x30
-#define D_2  0x32
-#define D_3  0x34
-#define D_4  0x36
-#define D_5  0x38
-#define D_6  0x3A
-#define D_7  0x3C
-#define D_8  0x3E
-
-#define E_1  0x40
-#define E_2  0x42
-#define E_3  0x44
-#define E_4  0x46
-#define E_5  0x48
-#define E_6  0x4A
-#define E_7  0x4C
-#define E_8  0x4E
-
-#define F_1  0x50
-#define F_2  0x52
-#define F_3  0x54
-#define F_4  0x56
-#define F_5  0x58
-#define F_6  0x5A
-#define F_7  0x5C
-#define F_8  0x5E
-
-#define G_1  0x60
-#define G_2  0x62
-#define G_3  0x64
-#define G_4  0x66
-#define G_5  0x68
-#define G_6  0x6A
-#define G_7  0x6C
-#define G_8  0x6E
-
-#define H_1  0x70
-#define H_2  0x72
-#define H_3  0x74
-#define H_4  0x76
-#define H_5  0x78
-#define H_6  0x7A
-#define H_7  0x7C
-#define H_8  0x7E
-
-#define I_1  0x80
-#define I_2  0x82
-#define I_3  0x84
-#define I_4  0x86
-#define I_5  0x88
-#define I_6  0x8A
-#define I_7  0x8C
-#define I_8  0x8E
-
-#define J_1  0x90
-#define J_2  0x92
-#define J_3  0x94
-#define J_4  0x96
-#define J_5  0x98
-#define J_6  0x9A
-#define J_7  0x9C
-#define J_8  0x9E
-
-#define K_1  0xA0
-#define K_2  0xA2
-#define K_3  0xA4
-#define K_4  0xA6
-#define K_5  0xA8
-#define K_6  0xAA
-#define K_7  0xAC
-#define K_8  0xAE
-
-#define L_1  0xB0
-#define L_2  0xB2
-#define L_3  0xB4
-#define L_4  0xB6
-#define L_5  0xB8
-#define L_6  0xBA
-#define L_7  0xBC
-#define L_8  0xBE
-
+void IS31FL3736_update_pwm_buffers(uint8_t addr1, uint8_t addr2);
+void IS31FL3736_update_led_control_registers(uint8_t addr1, uint8_t addr2);
+
+#define A_1 0x00
+#define A_2 0x02
+#define A_3 0x04
+#define A_4 0x06
+#define A_5 0x08
+#define A_6 0x0A
+#define A_7 0x0C
+#define A_8 0x0E
+
+#define B_1 0x10
+#define B_2 0x12
+#define B_3 0x14
+#define B_4 0x16
+#define B_5 0x18
+#define B_6 0x1A
+#define B_7 0x1C
+#define B_8 0x1E
+
+#define C_1 0x20
+#define C_2 0x22
+#define C_3 0x24
+#define C_4 0x26
+#define C_5 0x28
+#define C_6 0x2A
+#define C_7 0x2C
+#define C_8 0x2E
+
+#define D_1 0x30
+#define D_2 0x32
+#define D_3 0x34
+#define D_4 0x36
+#define D_5 0x38
+#define D_6 0x3A
+#define D_7 0x3C
+#define D_8 0x3E
+
+#define E_1 0x40
+#define E_2 0x42
+#define E_3 0x44
+#define E_4 0x46
+#define E_5 0x48
+#define E_6 0x4A
+#define E_7 0x4C
+#define E_8 0x4E
+
+#define F_1 0x50
+#define F_2 0x52
+#define F_3 0x54
+#define F_4 0x56
+#define F_5 0x58
+#define F_6 0x5A
+#define F_7 0x5C
+#define F_8 0x5E
+
+#define G_1 0x60
+#define G_2 0x62
+#define G_3 0x64
+#define G_4 0x66
+#define G_5 0x68
+#define G_6 0x6A
+#define G_7 0x6C
+#define G_8 0x6E
+
+#define H_1 0x70
+#define H_2 0x72
+#define H_3 0x74
+#define H_4 0x76
+#define H_5 0x78
+#define H_6 0x7A
+#define H_7 0x7C
+#define H_8 0x7E
+
+#define I_1 0x80
+#define I_2 0x82
+#define I_3 0x84
+#define I_4 0x86
+#define I_5 0x88
+#define I_6 0x8A
+#define I_7 0x8C
+#define I_8 0x8E
+
+#define J_1 0x90
+#define J_2 0x92
+#define J_3 0x94
+#define J_4 0x96
+#define J_5 0x98
+#define J_6 0x9A
+#define J_7 0x9C
+#define J_8 0x9E
+
+#define K_1 0xA0
+#define K_2 0xA2
+#define K_3 0xA4
+#define K_4 0xA6
+#define K_5 0xA8
+#define K_6 0xAA
+#define K_7 0xAC
+#define K_8 0xAE
+
+#define L_1 0xB0
+#define L_2 0xB2
+#define L_3 0xB4
+#define L_4 0xB6
+#define L_5 0xB8
+#define L_6 0xBA
+#define L_7 0xBC
+#define L_8 0xBE
diff --git a/drivers/issi/is31fl3737.c b/drivers/issi/is31fl3737.c
index 6491049274..4cc46272e2 100644
--- a/drivers/issi/is31fl3737.c
+++ b/drivers/issi/is31fl3737.c
@@ -17,11 +17,11 @@
  */
 
 #ifdef __AVR__
-#include <avr/interrupt.h>
-#include <avr/io.h>
-#include <util/delay.h>
+#    include <avr/interrupt.h>
+#    include <avr/io.h>
+#    include <util/delay.h>
 #else
-#include "wait.h"
+#    include "wait.h"
 #endif
 
 #include <string.h>
@@ -46,23 +46,23 @@
 #define ISSI_INTERRUPTMASKREGISTER 0xF0
 #define ISSI_INTERRUPTSTATUSREGISTER 0xF1
 
-#define ISSI_PAGE_LEDCONTROL 0x00 //PG0
-#define ISSI_PAGE_PWM 0x01        //PG1
-#define ISSI_PAGE_AUTOBREATH 0x02 //PG2
-#define ISSI_PAGE_FUNCTION 0x03   //PG3
+#define ISSI_PAGE_LEDCONTROL 0x00  // PG0
+#define ISSI_PAGE_PWM 0x01         // PG1
+#define ISSI_PAGE_AUTOBREATH 0x02  // PG2
+#define ISSI_PAGE_FUNCTION 0x03    // PG3
 
-#define ISSI_REG_CONFIGURATION 0x00 //PG3
-#define ISSI_REG_GLOBALCURRENT 0x01 //PG3
-#define ISSI_REG_RESET 0x11// PG3
-#define ISSI_REG_SWPULLUP 0x0F //PG3
-#define ISSI_REG_CSPULLUP 0x10 //PG3
+#define ISSI_REG_CONFIGURATION 0x00  // PG3
+#define ISSI_REG_GLOBALCURRENT 0x01  // PG3
+#define ISSI_REG_RESET 0x11          // PG3
+#define ISSI_REG_SWPULLUP 0x0F       // PG3
+#define ISSI_REG_CSPULLUP 0x10       // PG3
 
 #ifndef ISSI_TIMEOUT
-  #define ISSI_TIMEOUT 100
+#    define ISSI_TIMEOUT 100
 #endif
 
 #ifndef ISSI_PERSISTENCE
-  #define ISSI_PERSISTENCE 0
+#    define ISSI_PERSISTENCE 0
 #endif
 
 // Transfer buffer for TWITransmitData()
@@ -75,178 +75,161 @@ uint8_t g_twi_transfer_buffer[20];
 // buffers and the transfers in IS31FL3737_write_pwm_buffer() but it's
 // probably not worth the extra complexity.
 uint8_t g_pwm_buffer[DRIVER_COUNT][192];
-bool g_pwm_buffer_update_required = false;
+bool    g_pwm_buffer_update_required = false;
 
-uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 } };
-bool g_led_control_registers_update_required = false;
+uint8_t g_led_control_registers[DRIVER_COUNT][24] = {{0}};
+bool    g_led_control_registers_update_required   = false;
 
-void IS31FL3737_write_register( uint8_t addr, uint8_t reg, uint8_t data )
-{
+void IS31FL3737_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
     g_twi_transfer_buffer[0] = reg;
     g_twi_transfer_buffer[1] = data;
 
-  #if ISSI_PERSISTENCE > 0
+#if ISSI_PERSISTENCE > 0
     for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-      if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
-        break;
+        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) break;
     }
-  #else
+#else
     i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
-  #endif
+#endif
 }
 
-void IS31FL3737_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
-{
+void IS31FL3737_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
     // assumes PG1 is already selected
 
     // transmit PWM registers in 12 transfers of 16 bytes
     // g_twi_transfer_buffer[] is 20 bytes
 
     // iterate over the pwm_buffer contents at 16 byte intervals
-    for ( int i = 0; i < 192; i += 16 ) {
+    for (int i = 0; i < 192; i += 16) {
         g_twi_transfer_buffer[0] = i;
         // copy the data from i to i+15
         // device will auto-increment register for data after the first byte
         // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
-        for ( int j = 0; j < 16; j++ ) {
+        for (int j = 0; j < 16; j++) {
             g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
         }
 
-    #if ISSI_PERSISTENCE > 0
-      for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
-        if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
-          break;
-      }
-    #else
-      i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
-    #endif
+#if ISSI_PERSISTENCE > 0
+        for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+            if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0) break;
+        }
+#else
+        i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+#endif
     }
 }
 
-void IS31FL3737_init( uint8_t addr )
-{
+void IS31FL3737_init(uint8_t addr) {
     // In order to avoid the LEDs being driven with garbage data
     // in the LED driver's PWM registers, shutdown is enabled last.
     // Set up the mode and other settings, clear the PWM registers,
     // then disable software shutdown.
 
     // Unlock the command register.
-    IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+    IS31FL3737_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG0
-    IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+    IS31FL3737_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
     // Turn off all LEDs.
-    for ( int i = 0x00; i <= 0x17; i++ )
-    {
-        IS31FL3737_write_register( addr, i, 0x00 );
+    for (int i = 0x00; i <= 0x17; i++) {
+        IS31FL3737_write_register(addr, i, 0x00);
     }
 
     // Unlock the command register.
-    IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+    IS31FL3737_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG1
-    IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+    IS31FL3737_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
     // Set PWM on all LEDs to 0
     // No need to setup Breath registers to PWM as that is the default.
-    for ( int i = 0x00; i <= 0xBF; i++ )
-    {
-        IS31FL3737_write_register( addr, i, 0x00 );
+    for (int i = 0x00; i <= 0xBF; i++) {
+        IS31FL3737_write_register(addr, i, 0x00);
     }
 
     // Unlock the command register.
-    IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+    IS31FL3737_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
 
     // Select PG3
-    IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION );
+    IS31FL3737_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
     // Set global current to maximum.
-    IS31FL3737_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF );
+    IS31FL3737_write_register(addr, ISSI_REG_GLOBALCURRENT, 0xFF);
     // Disable software shutdown.
-    IS31FL3737_write_register( addr, ISSI_REG_CONFIGURATION, 0x01 );
+    IS31FL3737_write_register(addr, ISSI_REG_CONFIGURATION, 0x01);
 
-    // Wait 10ms to ensure the device has woken up.
-    #ifdef __AVR__
-    _delay_ms( 10 );
-    #else
+// Wait 10ms to ensure the device has woken up.
+#ifdef __AVR__
+    _delay_ms(10);
+#else
     wait_ms(10);
-    #endif
+#endif
 }
 
-void IS31FL3737_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
-{
-    if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
+void IS31FL3737_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
+    if (index >= 0 && index < DRIVER_LED_TOTAL) {
         is31_led led = g_is31_leds[index];
 
         g_pwm_buffer[led.driver][led.r] = red;
         g_pwm_buffer[led.driver][led.g] = green;
         g_pwm_buffer[led.driver][led.b] = blue;
-        g_pwm_buffer_update_required = true;
+        g_pwm_buffer_update_required    = true;
     }
 }
 
-void IS31FL3737_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
-{
-    for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
-    {
-        IS31FL3737_set_color( i, red, green, blue );
+void IS31FL3737_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
+    for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+        IS31FL3737_set_color(i, red, green, blue);
     }
 }
 
-void IS31FL3737_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
-{
+void IS31FL3737_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
     is31_led led = g_is31_leds[index];
 
-  uint8_t control_register_r = led.r / 8;
-  uint8_t control_register_g = led.g / 8;
-  uint8_t control_register_b = led.b / 8;
-  uint8_t bit_r = led.r % 8;
-  uint8_t bit_g = led.g % 8;
-  uint8_t bit_b = led.b % 8;
+    uint8_t control_register_r = led.r / 8;
+    uint8_t control_register_g = led.g / 8;
+    uint8_t control_register_b = led.b / 8;
+    uint8_t bit_r              = led.r % 8;
+    uint8_t bit_g              = led.g % 8;
+    uint8_t bit_b              = led.b % 8;
 
-    if ( red ) {
+    if (red) {
         g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
     } else {
         g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
     }
-    if ( green ) {
+    if (green) {
         g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
     } else {
         g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
     }
-    if ( blue ) {
+    if (blue) {
         g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
     } else {
         g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
     }
 
     g_led_control_registers_update_required = true;
-
 }
 
-void IS31FL3737_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
-{
-    if ( g_pwm_buffer_update_required )
-    {
+void IS31FL3737_update_pwm_buffers(uint8_t addr1, uint8_t addr2) {
+    if (g_pwm_buffer_update_required) {
         // Firstly we need to unlock the command register and select PG1
-        IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
-        IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+        IS31FL3737_write_register(addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+        IS31FL3737_write_register(addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
 
-        IS31FL3737_write_pwm_buffer( addr1, g_pwm_buffer[0] );
-        //IS31FL3737_write_pwm_buffer( addr2, g_pwm_buffer[1] );
+        IS31FL3737_write_pwm_buffer(addr1, g_pwm_buffer[0]);
+        // IS31FL3737_write_pwm_buffer( addr2, g_pwm_buffer[1] );
     }
     g_pwm_buffer_update_required = false;
 }
 
-void IS31FL3737_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
-{
-    if ( g_led_control_registers_update_required )
-    {
+void IS31FL3737_update_led_control_registers(uint8_t addr1, uint8_t addr2) {
+    if (g_led_control_registers_update_required) {
         // Firstly we need to unlock the command register and select PG0
-        IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
-        IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
-        for ( int i=0; i<24; i++ )
-        {
-            IS31FL3737_write_register(addr1, i, g_led_control_registers[0][i] );
-            //IS31FL3737_write_register(addr2, i, g_led_control_registers[1][i] );
+        IS31FL3737_write_register(addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
+        IS31FL3737_write_register(addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
+        for (int i = 0; i < 24; i++) {
+            IS31FL3737_write_register(addr1, i, g_led_control_registers[0][i]);
+            // IS31FL3737_write_register(addr2, i, g_led_control_registers[1][i] );
         }
     }
 }
diff --git a/drivers/issi/is31fl3737.h b/drivers/issi/is31fl3737.h
index 69c4b9b538..2c2fb19641 100644
--- a/drivers/issi/is31fl3737.h
+++ b/drivers/issi/is31fl3737.h
@@ -16,7 +16,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-
 #ifndef IS31FL3737_DRIVER_H
 #define IS31FL3737_DRIVER_H
 
@@ -24,184 +23,184 @@
 #include <stdbool.h>
 
 typedef struct is31_led {
-  uint8_t driver:2;
-  uint8_t r;
-  uint8_t g;
-  uint8_t b;
+    uint8_t driver : 2;
+    uint8_t r;
+    uint8_t g;
+    uint8_t b;
 } __attribute__((packed)) is31_led;
 
 extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
 
-void IS31FL3737_init( uint8_t addr );
-void IS31FL3737_write_register( uint8_t addr, uint8_t reg, uint8_t data );
-void IS31FL3737_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
+void IS31FL3737_init(uint8_t addr);
+void IS31FL3737_write_register(uint8_t addr, uint8_t reg, uint8_t data);
+void IS31FL3737_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer);
 
-void IS31FL3737_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
-void IS31FL3737_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3737_set_color(int index, uint8_t red, uint8_t green, uint8_t blue);
+void IS31FL3737_set_color_all(uint8_t red, uint8_t green, uint8_t blue);
 
-void IS31FL3737_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
+void IS31FL3737_set_led_control_register(uint8_t index, bool red, bool green, bool blue);
 
 // This should not be called from an interrupt
 // (eg. from a timer interrupt).
 // Call this while idle (in between matrix scans).
 // If the buffer is dirty, it will update the driver with the buffer.
-void IS31FL3737_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
-void IS31FL3737_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
-
-#define A_1   0x00
-#define A_2   0x01
-#define A_3   0x02
-#define A_4   0x03
-#define A_5   0x04
-#define A_6   0x05
-#define A_7   0x08
-#define A_8   0x09
-#define A_9   0x0A
-#define A_10  0x0B
-#define A_11  0x0C
-#define A_12  0x0D
-
-#define B_1   0x10
-#define B_2   0x11
-#define B_3   0x12
-#define B_4   0x13
-#define B_5   0x14
-#define B_6   0x15
-#define B_7   0x18
-#define B_8   0x19
-#define B_9   0x1A
-#define B_10  0x1B
-#define B_11  0x1C
-#define B_12  0x1D
-
-#define C_1   0x20
-#define C_2   0x21
-#define C_3   0x22
-#define C_4   0x23
-#define C_5   0x24
-#define C_6   0x25
-#define C_7   0x28
-#define C_8   0x29
-#define C_9   0x2A
-#define C_10  0x2B
-#define C_11  0x2C
-#define C_12  0x2D
-
-#define D_1   0x30
-#define D_2   0x31
-#define D_3   0x32
-#define D_4   0x33
-#define D_5   0x34
-#define D_6   0x35
-#define D_7   0x38
-#define D_8   0x39
-#define D_9   0x3A
-#define D_10  0x3B
-#define D_11  0x3C
-#define D_12  0x3D
-
-#define E_1   0x40
-#define E_2   0x41
-#define E_3   0x42
-#define E_4   0x43
-#define E_5   0x44
-#define E_6   0x45
-#define E_7   0x48
-#define E_8   0x49
-#define E_9   0x4A
-#define E_10  0x4B
-#define E_11  0x4C
-#define E_12  0x4D
-
-#define F_1   0x50
-#define F_2   0x51
-#define F_3   0x52
-#define F_4   0x53
-#define F_5   0x54
-#define F_6   0x55
-#define F_7   0x58
-#define F_8   0x59
-#define F_9   0x5A
-#define F_10  0x5B
-#define F_11  0x5C
-#define F_12  0x5D
-
-#define G_1   0x60
-#define G_2   0x61
-#define G_3   0x62
-#define G_4   0x63
-#define G_5   0x64
-#define G_6   0x65
-#define G_7   0x68
-#define G_8   0x69
-#define G_9   0x6A
-#define G_10  0x6B
-#define G_11  0x6C
-#define G_12  0x6D
-
-#define H_1   0x70
-#define H_2   0x71
-#define H_3   0x72
-#define H_4   0x73
-#define H_5   0x74
-#define H_6   0x75
-#define H_7   0x78
-#define H_8   0x79
-#define H_9   0x7A
-#define H_10  0x7B
-#define H_11  0x7C
-#define H_12  0x7D
-
-#define I_1   0x80
-#define I_2   0x81
-#define I_3   0x82
-#define I_4   0x83
-#define I_5   0x84
-#define I_6   0x85
-#define I_7   0x88
-#define I_8   0x89
-#define I_9   0x8A
-#define I_10  0x8B
-#define I_11  0x8C
-#define I_12  0x8D
-
-#define J_1   0x90
-#define J_2   0x91
-#define J_3   0x92
-#define J_4   0x93
-#define J_5   0x94
-#define J_6   0x95
-#define J_7   0x98
-#define J_8   0x99
-#define J_9   0x9A
-#define J_10  0x9B
-#define J_11  0x9C
-#define J_12  0x9D
-
-#define K_1   0xA0
-#define K_2   0xA1
-#define K_3   0xA2
-#define K_4   0xA3
-#define K_5   0xA4
-#define K_6   0xA5
-#define K_7   0xA8
-#define K_8   0xA9
-#define K_9   0xAA
-#define K_10  0xAB
-#define K_11  0xAC
-#define K_12  0xAD
-
-#define L_1   0xB0
-#define L_2   0xB1
-#define L_3   0xB2
-#define L_4   0xB3
-#define L_5   0xB4
-#define L_6   0xB5
-#define L_7   0xB8
-#define L_8   0xB9
-#define L_9   0xBA
-#define L_10  0xBB
-#define L_11  0xBC
-#define L_12  0xBD
-
-#endif // IS31FL3737_DRIVER_H
+void IS31FL3737_update_pwm_buffers(uint8_t addr1, uint8_t addr2);
+void IS31FL3737_update_led_control_registers(uint8_t addr1, uint8_t addr2);
+
+#define A_1 0x00
+#define A_2 0x01
+#define A_3 0x02
+#define A_4 0x03
+#define A_5 0x04
+#define A_6 0x05
+#define A_7 0x08
+#define A_8 0x09
+#define A_9 0x0A
+#define A_10 0x0B
+#define A_11 0x0C
+#define A_12 0x0D
+
+#define B_1 0x10
+#define B_2 0x11
+#define B_3 0x12
+#define B_4 0x13
+#define B_5 0x14
+#define B_6 0x15
+#define B_7 0x18
+#define B_8 0x19
+#define B_9 0x1A
+#define B_10 0x1B
+#define B_11 0x1C
+#define B_12 0x1D
+
+#define C_1 0x20
+#define C_2 0x21
+#define C_3 0x22
+#define C_4 0x23
+#define C_5 0x24
+#define C_6 0x25
+#define C_7 0x28
+#define C_8 0x29
+#define C_9 0x2A
+#define C_10 0x2B
+#define C_11 0x2C
+#define C_12 0x2D
+
+#define D_1 0x30
+#define D_2 0x31
+#define D_3 0x32
+#define D_4 0x33
+#define D_5 0x34
+#define D_6 0x35
+#define D_7 0x38
+#define D_8 0x39
+#define D_9 0x3A
+#define D_10 0x3B
+#define D_11 0x3C
+#define D_12 0x3D
+
+#define E_1 0x40
+#define E_2 0x41
+#define E_3 0x42
+#define E_4 0x43
+#define E_5 0x44
+#define E_6 0x45
+#define E_7 0x48
+#define E_8 0x49
+#define E_9 0x4A
+#define E_10 0x4B
+#define E_11 0x4C
+#define E_12 0x4D
+
+#define F_1 0x50
+#define F_2 0x51
+#define F_3 0x52
+#define F_4 0x53
+#define F_5 0x54
+#define F_6 0x55
+#define F_7 0x58
+#define F_8 0x59
+#define F_9 0x5A
+#define F_10 0x5B
+#define F_11 0x5C
+#define F_12 0x5D
+
+#define G_1 0x60
+#define G_2 0x61
+#define G_3 0x62
+#define G_4 0x63
+#define G_5 0x64
+#define G_6 0x65
+#define G_7 0x68
+#define G_8 0x69
+#define G_9 0x6A
+#define G_10 0x6B
+#define G_11 0x6C
+#define G_12 0x6D
+
+#define H_1 0x70
+#define H_2 0x71
+#define H_3 0x72
+#define H_4 0x73
+#define H_5 0x74
+#define H_6 0x75
+#define H_7 0x78
+#define H_8 0x79
+#define H_9 0x7A
+#define H_10 0x7B
+#define H_11 0x7C
+#define H_12 0x7D
+
+#define I_1 0x80
+#define I_2 0x81
+#define I_3 0x82
+#define I_4 0x83
+#define I_5 0x84
+#define I_6 0x85
+#define I_7 0x88
+#define I_8 0x89
+#define I_9 0x8A
+#define I_10 0x8B
+#define I_11 0x8C
+#define I_12 0x8D
+
+#define J_1 0x90
+#define J_2 0x91
+#define J_3 0x92
+#define J_4 0x93
+#define J_5 0x94
+#define J_6 0x95
+#define J_7 0x98
+#define J_8 0x99
+#define J_9 0x9A
+#define J_10 0x9B
+#define J_11 0x9C
+#define J_12 0x9D
+
+#define K_1 0xA0
+#define K_2 0xA1
+#define K_3 0xA2
+#define K_4 0xA3
+#define K_5 0xA4
+#define K_6 0xA5
+#define K_7 0xA8
+#define K_8 0xA9
+#define K_9 0xAA
+#define K_10 0xAB
+#define K_11 0xAC
+#define K_12 0xAD
+
+#define L_1 0xB0
+#define L_2 0xB1
+#define L_3 0xB2
+#define L_4 0xB3
+#define L_5 0xB4
+#define L_6 0xB5
+#define L_7 0xB8
+#define L_8 0xB9
+#define L_9 0xBA
+#define L_10 0xBB
+#define L_11 0xBC
+#define L_12 0xBD
+
+#endif  // IS31FL3737_DRIVER_H
diff --git a/drivers/oled/glcdfont.c b/drivers/oled/glcdfont.c
index 8b969057e5..95c5d2ebf4 100644
--- a/drivers/oled/glcdfont.c
+++ b/drivers/oled/glcdfont.c
@@ -1,240 +1,25 @@
 #pragma once
 
 #ifdef __AVR__
- #include <avr/io.h>
- #include <avr/pgmspace.h>
+#    include <avr/io.h>
+#    include <avr/pgmspace.h>
 #elif defined(ESP8266)
- #include <pgmspace.h>
+#    include <pgmspace.h>
 #else
- #define PROGMEM
+#    define PROGMEM
 #endif
 
 // Helidox 8x6 font with QMK Firmware Logo
 // Online editor: http://teripom.x0.com/
 
 static const unsigned char font[] PROGMEM = {
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
-  0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
-  0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
-  0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
-  0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
-  0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
-  0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
-  0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
-  0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
-  0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
-  0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
-  0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
-  0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
-  0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
-  0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
-  0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
-  0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
-  0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
-  0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
-  0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
-  0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
-  0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
-  0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
-  0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
-  0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
-  0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
-  0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
-  0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
-  0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
-  0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
-  0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
-  0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
-  0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
-  0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
-  0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
-  0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
-  0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
-  0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
-  0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
-  0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
-  0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
-  0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
-  0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
-  0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
-  0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
-  0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
-  0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
-  0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
-  0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
-  0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
-  0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
-  0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
-  0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
-  0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
-  0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
-  0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
-  0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
-  0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
-  0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
-  0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
-  0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
-  0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
-  0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
-  0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
-  0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
-  0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
-  0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
-  0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
-  0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
-  0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
-  0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
-  0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
-  0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
-  0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
-  0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
-  0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
-  0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
-  0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
-  0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
-  0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
-  0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
-  0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
-  0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
-  0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
-  0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
-  0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
-  0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
-  0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
-  0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
-  0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
-  0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
-  0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
-  0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
-  0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
-  0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
-  0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
-  0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
-  0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
-  0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
-  0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
-  0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x00,
-  0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
-  0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
-  0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
-  0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
-  0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
-  0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
-  0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
-  0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
-  0xFC, 0x18, 0x24, 0x24, 0x18, 0x00,
-  0x18, 0x24, 0x24, 0x18, 0xFC, 0x00,
-  0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
-  0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
-  0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
-  0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
-  0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
-  0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
-  0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
-  0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
-  0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
-  0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
-  0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
-  0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
-  0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
-  0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x40, 0x40, 0x40, 0xF0, 0xF8, 0xF8,
-  0xFF, 0x38, 0xFF, 0xF8, 0xF8, 0x3F,
-  0xF8, 0xF8, 0xFF, 0x38, 0xFF, 0xF8,
-  0xF8, 0xF0, 0x40, 0x40, 0x40, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
-  0xC0, 0xC0, 0xC0, 0x80, 0x00, 0x00,
-  0xC0, 0xC0, 0x80, 0x00, 0x00, 0x00,
-  0x80, 0xC0, 0xC0, 0x00, 0xC0, 0xC0,
-  0x00, 0x00, 0x80, 0xC0, 0xC0, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0xC0, 0xC0,
-  0xC0, 0xC0, 0xC0, 0x00, 0xC0, 0xC0,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0xC0, 0xF0, 0xF8, 0xFC, 0x3E,
-  0x1E, 0x06, 0x01, 0x00, 0x00, 0x00,
-  0x7F, 0x41, 0x41, 0x41, 0x7F, 0x00,
-  0x7F, 0x41, 0x41, 0x41, 0x7F, 0x00,
-  0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B,
-  0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00,
-  0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE,
-  0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x49, 0x49, 0x49, 0xFF, 0xFF, 0xFF,
-  0xFF, 0xE0, 0xDF, 0xBF, 0xBF, 0x00,
-  0xBF, 0xBF, 0xDF, 0xE0, 0xFF, 0xFF,
-  0xFF, 0xFF, 0x49, 0x49, 0x49, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x1F, 0x3F,
-  0x60, 0x60, 0xE0, 0xBF, 0x1F, 0x00,
-  0x7F, 0x7F, 0x07, 0x1E, 0x38, 0x1E,
-  0x07, 0x7F, 0x7F, 0x00, 0x7F, 0x7F,
-  0x0E, 0x1F, 0x3B, 0x71, 0x60, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x7F, 0x7F,
-  0x0C, 0x0C, 0x0C, 0x00, 0x7E, 0x7E,
-  0x00, 0x7F, 0x7E, 0x03, 0x03, 0x00,
-  0x7F, 0x7E, 0x03, 0x03, 0x7E, 0x7E,
-  0x03, 0x03, 0x7F, 0x7E, 0x00, 0x0F,
-  0x3E, 0x70, 0x3C, 0x06, 0x3C, 0x70,
-  0x3E, 0x0F, 0x00, 0x32, 0x7B, 0x49,
-  0x49, 0x3F, 0x7E, 0x00, 0x7F, 0x7E,
-  0x03, 0x03, 0x00, 0x1E, 0x3F, 0x69,
-  0x69, 0x6F, 0x26, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x03, 0x0F, 0x1F, 0x3F, 0x3C,
-  0x78, 0x70, 0x60, 0x00, 0x00, 0x00,
-  0x7F, 0x41, 0x41, 0x41, 0x7F, 0x00,
-  0x7F, 0x41, 0x41, 0x41, 0x7F, 0x00,
-  0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20,
-  0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00,
-  0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F,
-  0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x01, 0x01, 0x01, 0x07, 0x0F, 0x0F,
-  0x7F, 0x0F, 0x7F, 0x0F, 0x0F, 0x7E,
-  0x0F, 0x0F, 0x7F, 0x0F, 0x7F, 0x0F,
-  0x0F, 0x07, 0x01, 0x01, 0x01, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x01, 0x01, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
+    0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, 0x23, 0x13, 0x08, 0x64, 0x62, 0x00, 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, 0x00, 0x80, 0x70, 0x30, 0x00, 0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
+    0x72, 0x49, 0x49, 0x49, 0x46, 0x00, 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, 0x27, 0x45, 0x45, 0x45, 0x39, 0x00, 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, 0x41, 0x21, 0x11, 0x09, 0x07, 0x00, 0x36, 0x49, 0x49, 0x49, 0x36, 0x00, 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, 0x00, 0x41, 0x22, 0x14, 0x08, 0x00, 0x02, 0x01, 0x59, 0x09, 0x06, 0x00, 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
+    0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, 0x26, 0x49, 0x49, 0x49, 0x32, 0x00, 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, 0x63, 0x14, 0x08, 0x14, 0x63, 0x00, 0x03, 0x04, 0x78, 0x04, 0x03, 0x00, 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, 0x04, 0x02, 0x01, 0x02, 0x04, 0x00, 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, 0x00, 0x03, 0x07, 0x08, 0x00, 0x00, 0x20, 0x54, 0x54, 0x78, 0x40, 0x00, 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, 0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
+    0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, 0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x00, 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, 0xFC, 0x18, 0x24, 0x24, 0x18, 0x00, 0x18, 0x24, 0x24, 0x18, 0xFC, 0x00, 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, 0x48, 0x54, 0x54, 0x54, 0x24, 0x00, 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00, 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
+    0x00, 0x41, 0x36, 0x08, 0x00, 0x00, 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x40, 0x40, 0xF0, 0xF8, 0xF8, 0xFF, 0x38, 0xFF, 0xF8, 0xF8, 0x3F, 0xF8, 0xF8, 0xFF, 0x38, 0xFF, 0xF8, 0xF8, 0xF0, 0x40, 0x40, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xC0, 0xC0, 0xC0, 0x80, 0x00, 0x00, 0xC0, 0xC0, 0x80, 0x00, 0x00, 0x00, 0x80, 0xC0, 0xC0, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0x80, 0xC0, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xF0, 0xF8, 0xFC, 0x3E,
+    0x1E, 0x06, 0x01, 0x00, 0x00, 0x00, 0x7F, 0x41, 0x41, 0x41, 0x7F, 0x00, 0x7F, 0x41, 0x41, 0x41, 0x7F, 0x00, 0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B, 0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00, 0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE, 0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x49, 0x49, 0x49, 0xFF, 0xFF, 0xFF, 0xFF, 0xE0, 0xDF, 0xBF, 0xBF, 0x00, 0xBF, 0xBF, 0xDF, 0xE0, 0xFF, 0xFF, 0xFF, 0xFF, 0x49, 0x49, 0x49, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x3F, 0x60, 0x60, 0xE0, 0xBF, 0x1F, 0x00, 0x7F, 0x7F, 0x07, 0x1E, 0x38, 0x1E, 0x07, 0x7F, 0x7F, 0x00, 0x7F, 0x7F, 0x0E, 0x1F, 0x3B, 0x71, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0x7F, 0x0C, 0x0C, 0x0C, 0x00, 0x7E, 0x7E, 0x00, 0x7F, 0x7E, 0x03, 0x03, 0x00, 0x7F, 0x7E, 0x03, 0x03, 0x7E, 0x7E, 0x03, 0x03, 0x7F, 0x7E, 0x00, 0x0F,
+    0x3E, 0x70, 0x3C, 0x06, 0x3C, 0x70, 0x3E, 0x0F, 0x00, 0x32, 0x7B, 0x49, 0x49, 0x3F, 0x7E, 0x00, 0x7F, 0x7E, 0x03, 0x03, 0x00, 0x1E, 0x3F, 0x69, 0x69, 0x6F, 0x26, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x0F, 0x1F, 0x3F, 0x3C, 0x78, 0x70, 0x60, 0x00, 0x00, 0x00, 0x7F, 0x41, 0x41, 0x41, 0x7F, 0x00, 0x7F, 0x41, 0x41, 0x41, 0x7F, 0x00, 0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20, 0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00, 0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F, 0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x07, 0x0F, 0x0F, 0x7F, 0x0F, 0x7F, 0x0F, 0x0F, 0x7E, 0x0F, 0x0F, 0x7F, 0x0F, 0x7F, 0x0F, 0x0F, 0x07, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 };
diff --git a/drivers/oled/oled_driver.c b/drivers/oled/oled_driver.c
index 3dad72addb..1a1b7299bb 100644
--- a/drivers/oled/oled_driver.c
+++ b/drivers/oled/oled_driver.c
@@ -23,64 +23,64 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include <string.h>
 
 #if defined(__AVR__)
-  #include <avr/io.h>
-  #include <avr/pgmspace.h>
+#    include <avr/io.h>
+#    include <avr/pgmspace.h>
 #elif defined(ESP8266)
-  #include <pgmspace.h>
-#else // defined(ESP8266)
-  #define PROGMEM
-  #define memcpy_P(des, src, len) memcpy(des, src, len)
-#endif // defined(__AVR__)
+#    include <pgmspace.h>
+#else  // defined(ESP8266)
+#    define PROGMEM
+#    define memcpy_P(des, src, len) memcpy(des, src, len)
+#endif  // defined(__AVR__)
 
 // Used commands from spec sheet: https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf
 // for SH1106: https://www.velleman.eu/downloads/29/infosheets/sh1106_datasheet.pdf
 
 // Fundamental Commands
-#define CONTRAST                0x81
-#define DISPLAY_ALL_ON          0xA5
-#define DISPLAY_ALL_ON_RESUME   0xA4
-#define NORMAL_DISPLAY          0xA6
-#define DISPLAY_ON              0xAF
-#define DISPLAY_OFF             0xAE
-#define NOP                     0xE3
+#define CONTRAST 0x81
+#define DISPLAY_ALL_ON 0xA5
+#define DISPLAY_ALL_ON_RESUME 0xA4
+#define NORMAL_DISPLAY 0xA6
+#define DISPLAY_ON 0xAF
+#define DISPLAY_OFF 0xAE
+#define NOP 0xE3
 
 // Scrolling Commands
-#define ACTIVATE_SCROLL         0x2F
-#define DEACTIVATE_SCROLL       0x2E
-#define SCROLL_RIGHT            0x26
-#define SCROLL_LEFT             0x27
-#define SCROLL_RIGHT_UP         0x29
-#define SCROLL_LEFT_UP          0x2A
+#define ACTIVATE_SCROLL 0x2F
+#define DEACTIVATE_SCROLL 0x2E
+#define SCROLL_RIGHT 0x26
+#define SCROLL_LEFT 0x27
+#define SCROLL_RIGHT_UP 0x29
+#define SCROLL_LEFT_UP 0x2A
 
 // Addressing Setting Commands
-#define MEMORY_MODE             0x20
-#define COLUMN_ADDR             0x21
-#define PAGE_ADDR               0x22
-#define PAM_SETCOLUMN_LSB       0x00
-#define PAM_SETCOLUMN_MSB       0x10
-#define PAM_PAGE_ADDR           0xB0 // 0xb0 -- 0xb7
+#define MEMORY_MODE 0x20
+#define COLUMN_ADDR 0x21
+#define PAGE_ADDR 0x22
+#define PAM_SETCOLUMN_LSB 0x00
+#define PAM_SETCOLUMN_MSB 0x10
+#define PAM_PAGE_ADDR 0xB0  // 0xb0 -- 0xb7
 
 // Hardware Configuration Commands
-#define DISPLAY_START_LINE      0x40
-#define SEGMENT_REMAP           0xA0
-#define SEGMENT_REMAP_INV       0xA1
-#define MULTIPLEX_RATIO         0xA8
-#define COM_SCAN_INC            0xC0
-#define COM_SCAN_DEC            0xC8
-#define DISPLAY_OFFSET          0xD3
-#define COM_PINS                0xDA
-#define COM_PINS_SEQ            0x02
-#define COM_PINS_ALT            0x12
-#define COM_PINS_SEQ_LR         0x22
-#define COM_PINS_ALT_LR         0x32
+#define DISPLAY_START_LINE 0x40
+#define SEGMENT_REMAP 0xA0
+#define SEGMENT_REMAP_INV 0xA1
+#define MULTIPLEX_RATIO 0xA8
+#define COM_SCAN_INC 0xC0
+#define COM_SCAN_DEC 0xC8
+#define DISPLAY_OFFSET 0xD3
+#define COM_PINS 0xDA
+#define COM_PINS_SEQ 0x02
+#define COM_PINS_ALT 0x12
+#define COM_PINS_SEQ_LR 0x22
+#define COM_PINS_ALT_LR 0x32
 
 // Timing & Driving Commands
-#define DISPLAY_CLOCK           0xD5
-#define PRE_CHARGE_PERIOD       0xD9
-#define VCOM_DETECT             0xDB
+#define DISPLAY_CLOCK 0xD5
+#define PRE_CHARGE_PERIOD 0xD9
+#define VCOM_DETECT 0xDB
 
 // Charge Pump Commands
-#define CHARGE_PUMP             0x8D
+#define CHARGE_PUMP 0x8D
 
 // Misc defines
 #define OLED_TIMEOUT 60000
@@ -91,12 +91,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define I2C_CMD 0x00
 #define I2C_DATA 0x40
 #if defined(__AVR__)
-  // already defined on ARM
-  #define I2C_TIMEOUT 100
-  #define I2C_TRANSMIT_P(data) i2c_transmit_P((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), I2C_TIMEOUT)
-#else // defined(__AVR__)
-  #define I2C_TRANSMIT_P(data) i2c_transmit((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), I2C_TIMEOUT)
-#endif // defined(__AVR__)
+// already defined on ARM
+#    define I2C_TIMEOUT 100
+#    define I2C_TRANSMIT_P(data) i2c_transmit_P((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), I2C_TIMEOUT)
+#else  // defined(__AVR__)
+#    define I2C_TRANSMIT_P(data) i2c_transmit((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), I2C_TIMEOUT)
+#endif  // defined(__AVR__)
 #define I2C_TRANSMIT(data) i2c_transmit((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), I2C_TIMEOUT)
 #define I2C_WRITE_REG(mode, data, size) i2c_writeReg((OLED_DISPLAY_ADDRESS << 1), mode, data, size, I2C_TIMEOUT)
 
@@ -106,19 +106,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // this is so we don't end up with rounding errors with
 // parts of the display unusable or don't get cleared correctly
 // and also allows for drawing & inverting
-uint8_t          oled_buffer[OLED_MATRIX_SIZE];
-uint8_t*         oled_cursor;
-OLED_BLOCK_TYPE  oled_dirty = 0;
-bool             oled_initialized = false;
-bool             oled_active = false;
-bool             oled_scrolling = false;
-uint8_t          oled_rotation = 0;
-uint8_t          oled_rotation_width = 0;
+uint8_t         oled_buffer[OLED_MATRIX_SIZE];
+uint8_t *       oled_cursor;
+OLED_BLOCK_TYPE oled_dirty          = 0;
+bool            oled_initialized    = false;
+bool            oled_active         = false;
+bool            oled_scrolling      = false;
+uint8_t         oled_rotation       = 0;
+uint8_t         oled_rotation_width = 0;
 #if OLED_TIMEOUT > 0
-  uint32_t         oled_timeout;
+uint32_t oled_timeout;
 #endif
 #if OLED_SCROLL_TIMEOUT > 0
-  uint32_t         oled_scroll_timeout;
+uint32_t oled_scroll_timeout;
 #endif
 
 // Internal variables to reduce math instructions
@@ -126,468 +126,445 @@ uint8_t          oled_rotation_width = 0;
 #if defined(__AVR__)
 // identical to i2c_transmit, but for PROGMEM since all initialization is in PROGMEM arrays currently
 // probably should move this into i2c_master...
-static i2c_status_t i2c_transmit_P(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) {
-  i2c_status_t status = i2c_start(address | I2C_WRITE, timeout);
+static i2c_status_t i2c_transmit_P(uint8_t address, const uint8_t *data, uint16_t length, uint16_t timeout) {
+    i2c_status_t status = i2c_start(address | I2C_WRITE, timeout);
 
-  for (uint16_t i = 0; i < length && status >= 0; i++) {
-    status = i2c_write(pgm_read_byte((const char*)data++), timeout);
-    if (status) break;
-  }
+    for (uint16_t i = 0; i < length && status >= 0; i++) {
+        status = i2c_write(pgm_read_byte((const char *)data++), timeout);
+        if (status) break;
+    }
 
-  i2c_stop();
+    i2c_stop();
 
-  return status;
+    return status;
 }
 #endif
 
 // Flips the rendering bits for a character at the current cursor position
-static void InvertCharacter(uint8_t *cursor)
-{
-  const uint8_t *end = cursor + OLED_FONT_WIDTH;
-  while (cursor < end) {
-    *cursor = ~(*cursor);
-    cursor++;
-  }
+static void InvertCharacter(uint8_t *cursor) {
+    const uint8_t *end = cursor + OLED_FONT_WIDTH;
+    while (cursor < end) {
+        *cursor = ~(*cursor);
+        cursor++;
+    }
 }
 
 bool oled_init(uint8_t rotation) {
-  oled_rotation = oled_init_user(rotation);
-  if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
-    oled_rotation_width = OLED_DISPLAY_WIDTH;
-  } else {
-    oled_rotation_width = OLED_DISPLAY_HEIGHT;
-  }
-  i2c_init();
-
-  static const uint8_t PROGMEM display_setup1[] = {
-    I2C_CMD,
-    DISPLAY_OFF,
-    DISPLAY_CLOCK, 0x80,
-    MULTIPLEX_RATIO, OLED_DISPLAY_HEIGHT - 1,
-    DISPLAY_OFFSET, 0x00,
-    DISPLAY_START_LINE | 0x00,
-    CHARGE_PUMP, 0x14,
+    oled_rotation = oled_init_user(rotation);
+    if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
+        oled_rotation_width = OLED_DISPLAY_WIDTH;
+    } else {
+        oled_rotation_width = OLED_DISPLAY_HEIGHT;
+    }
+    i2c_init();
+
+    static const uint8_t PROGMEM display_setup1[] = {
+        I2C_CMD,
+        DISPLAY_OFF,
+        DISPLAY_CLOCK,
+        0x80,
+        MULTIPLEX_RATIO,
+        OLED_DISPLAY_HEIGHT - 1,
+        DISPLAY_OFFSET,
+        0x00,
+        DISPLAY_START_LINE | 0x00,
+        CHARGE_PUMP,
+        0x14,
 #if (OLED_IC != OLED_IC_SH1106)
-    // MEMORY_MODE is unsupported on SH1106 (Page Addressing only)
-    MEMORY_MODE, 0x00, // Horizontal addressing mode
+        // MEMORY_MODE is unsupported on SH1106 (Page Addressing only)
+        MEMORY_MODE,
+        0x00,  // Horizontal addressing mode
 #endif
-  };
-  if (I2C_TRANSMIT_P(display_setup1) != I2C_STATUS_SUCCESS) {
-    print("oled_init cmd set 1 failed\n");
-    return false;
-  }
-
-  if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_180)) {
-    static const uint8_t PROGMEM display_normal[] = {
-      I2C_CMD,
-      SEGMENT_REMAP_INV,
-      COM_SCAN_DEC };
-    if (I2C_TRANSMIT_P(display_normal) != I2C_STATUS_SUCCESS) {
-      print("oled_init cmd normal rotation failed\n");
-      return false;
-    }
-  } else {
-    static const uint8_t PROGMEM display_flipped[] = {
-      I2C_CMD,
-      SEGMENT_REMAP,
-      COM_SCAN_INC };
-    if (I2C_TRANSMIT_P(display_flipped) != I2C_STATUS_SUCCESS) {
-      print("display_flipped failed\n");
-      return false;
-    }
-  }
-
-  static const uint8_t PROGMEM display_setup2[] = {
-    I2C_CMD,
-    COM_PINS, OLED_COM_PINS,
-    CONTRAST, 0x8F,
-    PRE_CHARGE_PERIOD, 0xF1,
-    VCOM_DETECT, 0x40,
-    DISPLAY_ALL_ON_RESUME,
-    NORMAL_DISPLAY,
-    DEACTIVATE_SCROLL,
-    DISPLAY_ON };
-  if (I2C_TRANSMIT_P(display_setup2) != I2C_STATUS_SUCCESS) {
-    print("display_setup2 failed\n");
-    return false;
-  }
+    };
+    if (I2C_TRANSMIT_P(display_setup1) != I2C_STATUS_SUCCESS) {
+        print("oled_init cmd set 1 failed\n");
+        return false;
+    }
+
+    if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_180)) {
+        static const uint8_t PROGMEM display_normal[] = {I2C_CMD, SEGMENT_REMAP_INV, COM_SCAN_DEC};
+        if (I2C_TRANSMIT_P(display_normal) != I2C_STATUS_SUCCESS) {
+            print("oled_init cmd normal rotation failed\n");
+            return false;
+        }
+    } else {
+        static const uint8_t PROGMEM display_flipped[] = {I2C_CMD, SEGMENT_REMAP, COM_SCAN_INC};
+        if (I2C_TRANSMIT_P(display_flipped) != I2C_STATUS_SUCCESS) {
+            print("display_flipped failed\n");
+            return false;
+        }
+    }
+
+    static const uint8_t PROGMEM display_setup2[] = {I2C_CMD, COM_PINS, OLED_COM_PINS, CONTRAST, 0x8F, PRE_CHARGE_PERIOD, 0xF1, VCOM_DETECT, 0x40, DISPLAY_ALL_ON_RESUME, NORMAL_DISPLAY, DEACTIVATE_SCROLL, DISPLAY_ON};
+    if (I2C_TRANSMIT_P(display_setup2) != I2C_STATUS_SUCCESS) {
+        print("display_setup2 failed\n");
+        return false;
+    }
 
 #if OLED_TIMEOUT > 0
-  oled_timeout = timer_read32() + OLED_TIMEOUT;
+    oled_timeout = timer_read32() + OLED_TIMEOUT;
 #endif
 #if OLED_SCROLL_TIMEOUT > 0
-  oled_scroll_timeout = timer_read32() + OLED_SCROLL_TIMEOUT;
+    oled_scroll_timeout = timer_read32() + OLED_SCROLL_TIMEOUT;
 #endif
 
-  oled_clear();
-  oled_initialized = true;
-  oled_active = true;
-  oled_scrolling = false;
-  return true;
+    oled_clear();
+    oled_initialized = true;
+    oled_active      = true;
+    oled_scrolling   = false;
+    return true;
 }
 
-__attribute__((weak))
-oled_rotation_t oled_init_user(oled_rotation_t rotation) {
-  return rotation;
-}
+__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; }
 
 void oled_clear(void) {
-  memset(oled_buffer, 0, sizeof(oled_buffer));
-  oled_cursor = &oled_buffer[0];
-  oled_dirty = -1; // -1 will be max value as long as display_dirty is unsigned type
+    memset(oled_buffer, 0, sizeof(oled_buffer));
+    oled_cursor = &oled_buffer[0];
+    oled_dirty  = -1;  // -1 will be max value as long as display_dirty is unsigned type
 }
 
-static void calc_bounds(uint8_t update_start, uint8_t* cmd_array)
-{
-  // Calculate commands to set memory addressing bounds.
-  uint8_t start_page = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_WIDTH;
-  uint8_t start_column = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_WIDTH;
+static void calc_bounds(uint8_t update_start, uint8_t *cmd_array) {
+    // Calculate commands to set memory addressing bounds.
+    uint8_t start_page   = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_WIDTH;
+    uint8_t start_column = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_WIDTH;
 #if (OLED_IC == OLED_IC_SH1106)
-  // Commands for Page Addressing Mode. Sets starting page and column; has no end bound.
-  // Column value must be split into high and low nybble and sent as two commands.
-  cmd_array[0] = PAM_PAGE_ADDR | start_page;
-  cmd_array[1] = PAM_SETCOLUMN_LSB | ((OLED_COLUMN_OFFSET + start_column) & 0x0f);
-  cmd_array[2] = PAM_SETCOLUMN_MSB | ((OLED_COLUMN_OFFSET + start_column) >> 4 & 0x0f);
-  cmd_array[3] = NOP;
-  cmd_array[4] = NOP;
-  cmd_array[5] = NOP;
+    // Commands for Page Addressing Mode. Sets starting page and column; has no end bound.
+    // Column value must be split into high and low nybble and sent as two commands.
+    cmd_array[0] = PAM_PAGE_ADDR | start_page;
+    cmd_array[1] = PAM_SETCOLUMN_LSB | ((OLED_COLUMN_OFFSET + start_column) & 0x0f);
+    cmd_array[2] = PAM_SETCOLUMN_MSB | ((OLED_COLUMN_OFFSET + start_column) >> 4 & 0x0f);
+    cmd_array[3] = NOP;
+    cmd_array[4] = NOP;
+    cmd_array[5] = NOP;
 #else
-  // Commands for use in Horizontal Addressing mode.
-  cmd_array[1] = start_column;
-  cmd_array[4] = start_page;
-  cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) % OLED_DISPLAY_WIDTH + cmd_array[1];
-  cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) / OLED_DISPLAY_WIDTH - 1;
+    // Commands for use in Horizontal Addressing mode.
+    cmd_array[1] = start_column;
+    cmd_array[4] = start_page;
+    cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) % OLED_DISPLAY_WIDTH + cmd_array[1];
+    cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) / OLED_DISPLAY_WIDTH - 1;
 #endif
 }
 
-static void calc_bounds_90(uint8_t update_start, uint8_t* cmd_array)
-{
-  cmd_array[1] = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_HEIGHT * 8;
-  cmd_array[4] = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_HEIGHT;
-  cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) / OLED_DISPLAY_HEIGHT * 8 - 1 + cmd_array[1];;
-  cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) % OLED_DISPLAY_HEIGHT / 8;
+static void calc_bounds_90(uint8_t update_start, uint8_t *cmd_array) {
+    cmd_array[1] = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_HEIGHT * 8;
+    cmd_array[4] = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_HEIGHT;
+    cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) / OLED_DISPLAY_HEIGHT * 8 - 1 + cmd_array[1];
+    ;
+    cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) % OLED_DISPLAY_HEIGHT / 8;
 }
 
-uint8_t crot(uint8_t a, int8_t n)
-{
-  const uint8_t mask = 0x7;
-  n &= mask;
-  return a << n | a >> (-n & mask);
+uint8_t crot(uint8_t a, int8_t n) {
+    const uint8_t mask = 0x7;
+    n &= mask;
+    return a << n | a >> (-n & mask);
 }
 
-static void rotate_90(const uint8_t* src, uint8_t* dest)
-{
-  for (uint8_t i = 0, shift = 7; i < 8; ++i, --shift) {
-    uint8_t selector = (1 << i);
-    for (uint8_t j = 0; j < 8; ++j) {
-      dest[i] |= crot(src[j] & selector, shift - (int8_t)j);
+static void rotate_90(const uint8_t *src, uint8_t *dest) {
+    for (uint8_t i = 0, shift = 7; i < 8; ++i, --shift) {
+        uint8_t selector = (1 << i);
+        for (uint8_t j = 0; j < 8; ++j) {
+            dest[i] |= crot(src[j] & selector, shift - (int8_t)j);
+        }
     }
-  }
 }
 
 void oled_render(void) {
-  // Do we have work to do?
-  if (!oled_dirty || oled_scrolling) {
-    return;
-  }
-
-  // Find first dirty block
-  uint8_t update_start = 0;
-  while (!(oled_dirty & (1 << update_start))) { ++update_start; }
-
-  // Set column & page position
-  static uint8_t display_start[] = {
-    I2C_CMD,
-    COLUMN_ADDR, 0, OLED_DISPLAY_WIDTH - 1,
-    PAGE_ADDR, 0, OLED_DISPLAY_HEIGHT / 8 - 1 };
-  if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
-    calc_bounds(update_start, &display_start[1]); // Offset from I2C_CMD byte at the start
-  } else {
-    calc_bounds_90(update_start, &display_start[1]); // Offset from I2C_CMD byte at the start
-  }
-
-  // Send column & page position
-  if (I2C_TRANSMIT(display_start) != I2C_STATUS_SUCCESS) {
-    print("oled_render offset command failed\n");
-    return;
-  }
-
-  if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
-    // Send render data chunk as is
-    if (I2C_WRITE_REG(I2C_DATA, &oled_buffer[OLED_BLOCK_SIZE * update_start], OLED_BLOCK_SIZE) != I2C_STATUS_SUCCESS) {
-      print("oled_render data failed\n");
-      return;
-    }
-  } else {
-    // Rotate the render chunks
-    const static uint8_t source_map[] = OLED_SOURCE_MAP;
-    const static uint8_t target_map[] = OLED_TARGET_MAP;
-
-    static uint8_t temp_buffer[OLED_BLOCK_SIZE];
-    memset(temp_buffer, 0, sizeof(temp_buffer));
-    for(uint8_t i = 0; i < sizeof(source_map); ++i) {
-      rotate_90(&oled_buffer[OLED_BLOCK_SIZE * update_start + source_map[i]], &temp_buffer[target_map[i]]);
-    }
-
-    // Send render data chunk after rotating
-    if (I2C_WRITE_REG(I2C_DATA, &temp_buffer[0], OLED_BLOCK_SIZE) != I2C_STATUS_SUCCESS) {
-      print("oled_render90 data failed\n");
-      return;
-    }
-  }
-
-  // Turn on display if it is off
-  oled_on();
-
-  // Clear dirty flag
-  oled_dirty &= ~(1 << update_start);
+    // Do we have work to do?
+    if (!oled_dirty || oled_scrolling) {
+        return;
+    }
+
+    // Find first dirty block
+    uint8_t update_start = 0;
+    while (!(oled_dirty & (1 << update_start))) {
+        ++update_start;
+    }
+
+    // Set column & page position
+    static uint8_t display_start[] = {I2C_CMD, COLUMN_ADDR, 0, OLED_DISPLAY_WIDTH - 1, PAGE_ADDR, 0, OLED_DISPLAY_HEIGHT / 8 - 1};
+    if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
+        calc_bounds(update_start, &display_start[1]);  // Offset from I2C_CMD byte at the start
+    } else {
+        calc_bounds_90(update_start, &display_start[1]);  // Offset from I2C_CMD byte at the start
+    }
+
+    // Send column & page position
+    if (I2C_TRANSMIT(display_start) != I2C_STATUS_SUCCESS) {
+        print("oled_render offset command failed\n");
+        return;
+    }
+
+    if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
+        // Send render data chunk as is
+        if (I2C_WRITE_REG(I2C_DATA, &oled_buffer[OLED_BLOCK_SIZE * update_start], OLED_BLOCK_SIZE) != I2C_STATUS_SUCCESS) {
+            print("oled_render data failed\n");
+            return;
+        }
+    } else {
+        // Rotate the render chunks
+        const static uint8_t source_map[] = OLED_SOURCE_MAP;
+        const static uint8_t target_map[] = OLED_TARGET_MAP;
+
+        static uint8_t temp_buffer[OLED_BLOCK_SIZE];
+        memset(temp_buffer, 0, sizeof(temp_buffer));
+        for (uint8_t i = 0; i < sizeof(source_map); ++i) {
+            rotate_90(&oled_buffer[OLED_BLOCK_SIZE * update_start + source_map[i]], &temp_buffer[target_map[i]]);
+        }
+
+        // Send render data chunk after rotating
+        if (I2C_WRITE_REG(I2C_DATA, &temp_buffer[0], OLED_BLOCK_SIZE) != I2C_STATUS_SUCCESS) {
+            print("oled_render90 data failed\n");
+            return;
+        }
+    }
+
+    // Turn on display if it is off
+    oled_on();
+
+    // Clear dirty flag
+    oled_dirty &= ~(1 << update_start);
 }
 
 void oled_set_cursor(uint8_t col, uint8_t line) {
-  uint16_t index = line * oled_rotation_width + col * OLED_FONT_WIDTH;
+    uint16_t index = line * oled_rotation_width + col * OLED_FONT_WIDTH;
 
-  // Out of bounds?
-  if (index >= OLED_MATRIX_SIZE) {
-    index = 0;
-  }
+    // Out of bounds?
+    if (index >= OLED_MATRIX_SIZE) {
+        index = 0;
+    }
 
-  oled_cursor = &oled_buffer[index];
+    oled_cursor = &oled_buffer[index];
 }
 
 void oled_advance_page(bool clearPageRemainder) {
-  uint16_t index = oled_cursor - &oled_buffer[0];
-  uint8_t remaining = oled_rotation_width - (index % oled_rotation_width);
-
-  if (clearPageRemainder) {
-    // Remaining Char count
-    remaining = remaining / OLED_FONT_WIDTH;
-
-    // Write empty character until next line
-    while (remaining--)
-      oled_write_char(' ', false);
-  } else {
-    // Next page index out of bounds?
-    if (index + remaining >= OLED_MATRIX_SIZE) {
-      index = 0;
-      remaining = 0;
+    uint16_t index     = oled_cursor - &oled_buffer[0];
+    uint8_t  remaining = oled_rotation_width - (index % oled_rotation_width);
+
+    if (clearPageRemainder) {
+        // Remaining Char count
+        remaining = remaining / OLED_FONT_WIDTH;
+
+        // Write empty character until next line
+        while (remaining--) oled_write_char(' ', false);
+    } else {
+        // Next page index out of bounds?
+        if (index + remaining >= OLED_MATRIX_SIZE) {
+            index     = 0;
+            remaining = 0;
+        }
+
+        oled_cursor = &oled_buffer[index + remaining];
     }
-
-    oled_cursor = &oled_buffer[index + remaining];
-  }
 }
 
 void oled_advance_char(void) {
-  uint16_t nextIndex = oled_cursor - &oled_buffer[0] + OLED_FONT_WIDTH;
-  uint8_t remainingSpace = oled_rotation_width - (nextIndex % oled_rotation_width);
+    uint16_t nextIndex      = oled_cursor - &oled_buffer[0] + OLED_FONT_WIDTH;
+    uint8_t  remainingSpace = oled_rotation_width - (nextIndex % oled_rotation_width);
 
-  // Do we have enough space on the current line for the next character
-  if (remainingSpace < OLED_FONT_WIDTH) {
-    nextIndex += remainingSpace;
-  }
+    // Do we have enough space on the current line for the next character
+    if (remainingSpace < OLED_FONT_WIDTH) {
+        nextIndex += remainingSpace;
+    }
 
-  // Did we go out of bounds
-  if (nextIndex >= OLED_MATRIX_SIZE) {
-    nextIndex = 0;
-  }
+    // Did we go out of bounds
+    if (nextIndex >= OLED_MATRIX_SIZE) {
+        nextIndex = 0;
+    }
 
-  // Update cursor position
-  oled_cursor = &oled_buffer[nextIndex];
+    // Update cursor position
+    oled_cursor = &oled_buffer[nextIndex];
 }
 
 // Main handler that writes character data to the display buffer
 void oled_write_char(const char data, bool invert) {
-  // Advance to the next line if newline
-  if (data == '\n') {
-    // Old source wrote ' ' until end of line...
-    oled_advance_page(true);
-    return;
-  }
-
-  if (data == '\r') {
-    oled_advance_page(false);
-    return;
-  }
-
-  // copy the current render buffer to check for dirty after
-  static uint8_t oled_temp_buffer[OLED_FONT_WIDTH];
-  memcpy(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH);
-
-  // set the reder buffer data
-  uint8_t cast_data = (uint8_t)data; // font based on unsigned type for index
-  if (cast_data < OLED_FONT_START || cast_data > OLED_FONT_END) {
-    memset(oled_cursor, 0x00, OLED_FONT_WIDTH);
-  } else {
-    const uint8_t *glyph = &font[(cast_data - OLED_FONT_START) * OLED_FONT_WIDTH];
-    memcpy_P(oled_cursor, glyph, OLED_FONT_WIDTH);
-  }
-
-  // Invert if needed
-  if (invert) {
-    InvertCharacter(oled_cursor);
-  }
-
-  // Dirty check
-  if (memcmp(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH)) {
-    uint16_t index = oled_cursor - &oled_buffer[0];
-    oled_dirty |= (1 << (index / OLED_BLOCK_SIZE));
-    // Edgecase check if the written data spans the 2 chunks
-    oled_dirty |= (1 << ((index + OLED_FONT_WIDTH) / OLED_BLOCK_SIZE));
-  }
-
-  // Finally move to the next char
-  oled_advance_char();
+    // Advance to the next line if newline
+    if (data == '\n') {
+        // Old source wrote ' ' until end of line...
+        oled_advance_page(true);
+        return;
+    }
+
+    if (data == '\r') {
+        oled_advance_page(false);
+        return;
+    }
+
+    // copy the current render buffer to check for dirty after
+    static uint8_t oled_temp_buffer[OLED_FONT_WIDTH];
+    memcpy(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH);
+
+    // set the reder buffer data
+    uint8_t cast_data = (uint8_t)data;  // font based on unsigned type for index
+    if (cast_data < OLED_FONT_START || cast_data > OLED_FONT_END) {
+        memset(oled_cursor, 0x00, OLED_FONT_WIDTH);
+    } else {
+        const uint8_t *glyph = &font[(cast_data - OLED_FONT_START) * OLED_FONT_WIDTH];
+        memcpy_P(oled_cursor, glyph, OLED_FONT_WIDTH);
+    }
+
+    // Invert if needed
+    if (invert) {
+        InvertCharacter(oled_cursor);
+    }
+
+    // Dirty check
+    if (memcmp(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH)) {
+        uint16_t index = oled_cursor - &oled_buffer[0];
+        oled_dirty |= (1 << (index / OLED_BLOCK_SIZE));
+        // Edgecase check if the written data spans the 2 chunks
+        oled_dirty |= (1 << ((index + OLED_FONT_WIDTH) / OLED_BLOCK_SIZE));
+    }
+
+    // Finally move to the next char
+    oled_advance_char();
 }
 
 void oled_write(const char *data, bool invert) {
-  const char *end = data + strlen(data);
-  while (data < end) {
-    oled_write_char(*data, invert);
-    data++;
-  }
+    const char *end = data + strlen(data);
+    while (data < end) {
+        oled_write_char(*data, invert);
+        data++;
+    }
 }
 
 void oled_write_ln(const char *data, bool invert) {
-  oled_write(data, invert);
-  oled_advance_page(true);
+    oled_write(data, invert);
+    oled_advance_page(true);
 }
 
 #if defined(__AVR__)
 void oled_write_P(const char *data, bool invert) {
-  uint8_t c = pgm_read_byte(data);
-  while (c != 0) {
-    oled_write_char(c, invert);
-    c = pgm_read_byte(++data);
-  }
+    uint8_t c = pgm_read_byte(data);
+    while (c != 0) {
+        oled_write_char(c, invert);
+        c = pgm_read_byte(++data);
+    }
 }
 
 void oled_write_ln_P(const char *data, bool invert) {
-  oled_write_P(data, invert);
-  oled_advance_page(true);
+    oled_write_P(data, invert);
+    oled_advance_page(true);
 }
-#endif // defined(__AVR__)
+#endif  // defined(__AVR__)
 
 bool oled_on(void) {
 #if OLED_TIMEOUT > 0
-  oled_timeout = timer_read32() + OLED_TIMEOUT;
+    oled_timeout = timer_read32() + OLED_TIMEOUT;
 #endif
 
-  static const uint8_t PROGMEM display_on[] = { I2C_CMD, DISPLAY_ON };
-  if (!oled_active) {
-    if (I2C_TRANSMIT_P(display_on) != I2C_STATUS_SUCCESS) {
-      print("oled_on cmd failed\n");
-      return oled_active;
+    static const uint8_t PROGMEM display_on[] = {I2C_CMD, DISPLAY_ON};
+    if (!oled_active) {
+        if (I2C_TRANSMIT_P(display_on) != I2C_STATUS_SUCCESS) {
+            print("oled_on cmd failed\n");
+            return oled_active;
+        }
+        oled_active = true;
     }
-    oled_active = true;
-  }
-  return oled_active;
+    return oled_active;
 }
 
 bool oled_off(void) {
-  static const uint8_t PROGMEM display_off[] = { I2C_CMD, DISPLAY_OFF };
-  if (oled_active) {
-    if (I2C_TRANSMIT_P(display_off) != I2C_STATUS_SUCCESS) {
-      print("oled_off cmd failed\n");
-      return oled_active;
-    }
-    oled_active = false;
-  }
-  return !oled_active;
+    static const uint8_t PROGMEM display_off[] = {I2C_CMD, DISPLAY_OFF};
+    if (oled_active) {
+        if (I2C_TRANSMIT_P(display_off) != I2C_STATUS_SUCCESS) {
+            print("oled_off cmd failed\n");
+            return oled_active;
+        }
+        oled_active = false;
+    }
+    return !oled_active;
 }
 
 bool oled_scroll_right(void) {
-  // Dont enable scrolling if we need to update the display
-  // This prevents scrolling of bad data from starting the scroll too early after init
-  if (!oled_dirty && !oled_scrolling) {
-    static const uint8_t PROGMEM display_scroll_right[] = {
-      I2C_CMD, SCROLL_RIGHT, 0x00, 0x00, 0x00, 0x0F, 0x00, 0xFF, ACTIVATE_SCROLL };
-    if (I2C_TRANSMIT_P(display_scroll_right) != I2C_STATUS_SUCCESS) {
-      print("oled_scroll_right cmd failed\n");
-      return oled_scrolling;
-    }
-    oled_scrolling = true;
-  }
-  return oled_scrolling;
+    // Dont enable scrolling if we need to update the display
+    // This prevents scrolling of bad data from starting the scroll too early after init
+    if (!oled_dirty && !oled_scrolling) {
+        static const uint8_t PROGMEM display_scroll_right[] = {I2C_CMD, SCROLL_RIGHT, 0x00, 0x00, 0x00, 0x0F, 0x00, 0xFF, ACTIVATE_SCROLL};
+        if (I2C_TRANSMIT_P(display_scroll_right) != I2C_STATUS_SUCCESS) {
+            print("oled_scroll_right cmd failed\n");
+            return oled_scrolling;
+        }
+        oled_scrolling = true;
+    }
+    return oled_scrolling;
 }
 
 bool oled_scroll_left(void) {
-  // Dont enable scrolling if we need to update the display
-  // This prevents scrolling of bad data from starting the scroll too early after init
-  if (!oled_dirty && !oled_scrolling) {
-    static const uint8_t PROGMEM display_scroll_left[] = {
-      I2C_CMD, SCROLL_LEFT, 0x00, 0x00, 0x00, 0x0F, 0x00, 0xFF, ACTIVATE_SCROLL };
-    if (I2C_TRANSMIT_P(display_scroll_left) != I2C_STATUS_SUCCESS) {
-      print("oled_scroll_left cmd failed\n");
-      return oled_scrolling;
-    }
-    oled_scrolling = true;
-  }
-  return oled_scrolling;
+    // Dont enable scrolling if we need to update the display
+    // This prevents scrolling of bad data from starting the scroll too early after init
+    if (!oled_dirty && !oled_scrolling) {
+        static const uint8_t PROGMEM display_scroll_left[] = {I2C_CMD, SCROLL_LEFT, 0x00, 0x00, 0x00, 0x0F, 0x00, 0xFF, ACTIVATE_SCROLL};
+        if (I2C_TRANSMIT_P(display_scroll_left) != I2C_STATUS_SUCCESS) {
+            print("oled_scroll_left cmd failed\n");
+            return oled_scrolling;
+        }
+        oled_scrolling = true;
+    }
+    return oled_scrolling;
 }
 
 bool oled_scroll_off(void) {
-  if (oled_scrolling) {
-    static const uint8_t PROGMEM display_scroll_off[] = { I2C_CMD, DEACTIVATE_SCROLL };
-    if (I2C_TRANSMIT_P(display_scroll_off) != I2C_STATUS_SUCCESS) {
-      print("oled_scroll_off cmd failed\n");
-      return oled_scrolling;
-    }
-    oled_scrolling = false;
-    oled_dirty = -1;
-  }
-  return !oled_scrolling;
+    if (oled_scrolling) {
+        static const uint8_t PROGMEM display_scroll_off[] = {I2C_CMD, DEACTIVATE_SCROLL};
+        if (I2C_TRANSMIT_P(display_scroll_off) != I2C_STATUS_SUCCESS) {
+            print("oled_scroll_off cmd failed\n");
+            return oled_scrolling;
+        }
+        oled_scrolling = false;
+        oled_dirty     = -1;
+    }
+    return !oled_scrolling;
 }
 
 uint8_t oled_max_chars(void) {
-  if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
-    return OLED_DISPLAY_WIDTH / OLED_FONT_WIDTH;
-  }
-  return OLED_DISPLAY_HEIGHT / OLED_FONT_WIDTH;
+    if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
+        return OLED_DISPLAY_WIDTH / OLED_FONT_WIDTH;
+    }
+    return OLED_DISPLAY_HEIGHT / OLED_FONT_WIDTH;
 }
 
 uint8_t oled_max_lines(void) {
-  if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
-    return OLED_DISPLAY_HEIGHT / OLED_FONT_HEIGHT;
-  }
-  return OLED_DISPLAY_WIDTH / OLED_FONT_HEIGHT;
+    if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
+        return OLED_DISPLAY_HEIGHT / OLED_FONT_HEIGHT;
+    }
+    return OLED_DISPLAY_WIDTH / OLED_FONT_HEIGHT;
 }
 
 void oled_task(void) {
-  if (!oled_initialized) {
-    return;
-  }
+    if (!oled_initialized) {
+        return;
+    }
 
-  oled_set_cursor(0, 0);
+    oled_set_cursor(0, 0);
 
-  oled_task_user();
+    oled_task_user();
 
 #if OLED_SCROLL_TIMEOUT > 0
-  if (oled_dirty && oled_scrolling) {
-    oled_scroll_timeout = timer_read32() + OLED_SCROLL_TIMEOUT;
-    oled_scroll_off();
-  }
+    if (oled_dirty && oled_scrolling) {
+        oled_scroll_timeout = timer_read32() + OLED_SCROLL_TIMEOUT;
+        oled_scroll_off();
+    }
 #endif
 
-  // Smart render system, no need to check for dirty
-  oled_render();
+    // Smart render system, no need to check for dirty
+    oled_render();
 
-  // Display timeout check
+    // Display timeout check
 #if OLED_TIMEOUT > 0
-  if (oled_active && timer_expired32(timer_read32(), oled_timeout)) {
-    oled_off();
-  }
+    if (oled_active && timer_expired32(timer_read32(), oled_timeout)) {
+        oled_off();
+    }
 #endif
 
 #if OLED_SCROLL_TIMEOUT > 0
-  if (!oled_scrolling && timer_expired32(timer_read32(), oled_scroll_timeout)) {
-#ifdef OLED_SCROLL_TIMEOUT_RIGHT
-    oled_scroll_right();
-#else
-    oled_scroll_left();
-#endif
-  }
+    if (!oled_scrolling && timer_expired32(timer_read32(), oled_scroll_timeout)) {
+#    ifdef OLED_SCROLL_TIMEOUT_RIGHT
+        oled_scroll_right();
+#    else
+        oled_scroll_left();
+#    endif
+    }
 #endif
 }
 
-__attribute__((weak))
-void oled_task_user(void) {
-}
+__attribute__((weak)) void oled_task_user(void) {}
diff --git a/drivers/oled/oled_driver.h b/drivers/oled/oled_driver.h
index 4f6254c98c..ac8a1c7651 100644
--- a/drivers/oled/oled_driver.h
+++ b/drivers/oled/oled_driver.h
@@ -21,129 +21,133 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // an enumeration of the chips this driver supports
 #define OLED_IC_SSD1306 0
-#define OLED_IC_SH1106  1
+#define OLED_IC_SH1106 1
 
 #if defined(OLED_DISPLAY_CUSTOM)
-  // Expected user to implement the necessary defines
+// Expected user to implement the necessary defines
 #elif defined(OLED_DISPLAY_128X64)
-  // Double height 128x64
-#ifndef OLED_DISPLAY_WIDTH
-  #define OLED_DISPLAY_WIDTH 128
-#endif
-#ifndef OLED_DISPLAY_HEIGHT
-  #define OLED_DISPLAY_HEIGHT 64
-#endif
-#ifndef OLED_MATRIX_SIZE
-  #define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 1024 (compile time mathed)
-#endif
-#ifndef OLED_BLOCK_TYPE
-  #define OLED_BLOCK_TYPE uint16_t
-#endif
-#ifndef OLED_BLOCK_COUNT
-  #define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 32 (compile time mathed)
-#endif
-#ifndef OLED_BLOCK_SIZE
-  #define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 32 (compile time mathed)
-#endif
-#ifndef OLED_COM_PINS
-  #define OLED_COM_PINS COM_PINS_ALT
-#endif
-
-  // For 90 degree rotation, we map our internal matrix to oled matrix using fixed arrays
-  // The OLED writes to it's memory horizontally, starting top left, but our memory starts bottom left in this mode
-#ifndef OLED_SOURCE_MAP
-  #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 }
-#endif
-#ifndef OLED_TARGET_MAP
-  #define OLED_TARGET_MAP { 56, 48, 40, 32, 24, 16, 8, 0 }
-#endif
-  // If OLED_BLOCK_TYPE is uint32_t, these tables would look like:
-  // #define OLED_SOURCE_MAP { 32, 40, 48, 56 }
-  // #define OLED_TARGET_MAP { 24, 16, 8, 0 }
-  // If OLED_BLOCK_TYPE is uint16_t, these tables would look like:
-  // #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 }
-  // #define OLED_TARGET_MAP { 56, 48, 40, 32, 24, 16, 8, 0 }
-  // If OLED_BLOCK_TYPE is uint8_t, these tables would look like:
-  // #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 }
-  // #define OLED_TARGET_MAP { 56, 120, 48, 112, 40, 104, 32, 96, 24, 88, 16, 80, 8, 72, 0, 64 }
-#else // defined(OLED_DISPLAY_128X64)
-  // Default 128x32
-#ifndef OLED_DISPLAY_WIDTH
-  #define OLED_DISPLAY_WIDTH 128
-#endif
-#ifndef OLED_DISPLAY_HEIGHT
-  #define OLED_DISPLAY_HEIGHT 32
-#endif
-#ifndef OLED_MATRIX_SIZE
-  #define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 512 (compile time mathed)
-#endif
-#ifndef OLED_BLOCK_TYPE
-  #define OLED_BLOCK_TYPE uint16_t // Type to use for segmenting the oled display for smart rendering, use unsigned types only
-#endif
-#ifndef OLED_BLOCK_COUNT
-  #define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 16 (compile time mathed)
-#endif
-#ifndef OLED_BLOCK_SIZE
-  #define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 32 (compile time mathed)
-#endif
-#ifndef OLED_COM_PINS
-  #define OLED_COM_PINS COM_PINS_SEQ
-#endif
-
-  // For 90 degree rotation, we map our internal matrix to oled matrix using fixed arrays
-  // The OLED writes to it's memory horizontally, starting top left, but our memory starts bottom left in this mode
-#ifndef OLED_SOURCE_MAP
-  #define OLED_SOURCE_MAP { 0, 8, 16, 24 }
-#endif
-#ifndef OLED_TARGET_MAP
-  #define OLED_TARGET_MAP { 24, 16, 8, 0 }
-#endif
-  // If OLED_BLOCK_TYPE is uint8_t, these tables would look like:
-  // #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 }
-  // #define OLED_TARGET_MAP { 48, 32, 16, 0, 56, 40, 24, 8 }
-#endif // defined(OLED_DISPLAY_CUSTOM)
+// Double height 128x64
+#    ifndef OLED_DISPLAY_WIDTH
+#        define OLED_DISPLAY_WIDTH 128
+#    endif
+#    ifndef OLED_DISPLAY_HEIGHT
+#        define OLED_DISPLAY_HEIGHT 64
+#    endif
+#    ifndef OLED_MATRIX_SIZE
+#        define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH)  // 1024 (compile time mathed)
+#    endif
+#    ifndef OLED_BLOCK_TYPE
+#        define OLED_BLOCK_TYPE uint16_t
+#    endif
+#    ifndef OLED_BLOCK_COUNT
+#        define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8)  // 32 (compile time mathed)
+#    endif
+#    ifndef OLED_BLOCK_SIZE
+#        define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)  // 32 (compile time mathed)
+#    endif
+#    ifndef OLED_COM_PINS
+#        define OLED_COM_PINS COM_PINS_ALT
+#    endif
+
+// For 90 degree rotation, we map our internal matrix to oled matrix using fixed arrays
+// The OLED writes to it's memory horizontally, starting top left, but our memory starts bottom left in this mode
+#    ifndef OLED_SOURCE_MAP
+#        define OLED_SOURCE_MAP \
+            { 0, 8, 16, 24, 32, 40, 48, 56 }
+#    endif
+#    ifndef OLED_TARGET_MAP
+#        define OLED_TARGET_MAP \
+            { 56, 48, 40, 32, 24, 16, 8, 0 }
+#    endif
+// If OLED_BLOCK_TYPE is uint32_t, these tables would look like:
+// #define OLED_SOURCE_MAP { 32, 40, 48, 56 }
+// #define OLED_TARGET_MAP { 24, 16, 8, 0 }
+// If OLED_BLOCK_TYPE is uint16_t, these tables would look like:
+// #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 }
+// #define OLED_TARGET_MAP { 56, 48, 40, 32, 24, 16, 8, 0 }
+// If OLED_BLOCK_TYPE is uint8_t, these tables would look like:
+// #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 }
+// #define OLED_TARGET_MAP { 56, 120, 48, 112, 40, 104, 32, 96, 24, 88, 16, 80, 8, 72, 0, 64 }
+#else  // defined(OLED_DISPLAY_128X64)
+// Default 128x32
+#    ifndef OLED_DISPLAY_WIDTH
+#        define OLED_DISPLAY_WIDTH 128
+#    endif
+#    ifndef OLED_DISPLAY_HEIGHT
+#        define OLED_DISPLAY_HEIGHT 32
+#    endif
+#    ifndef OLED_MATRIX_SIZE
+#        define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH)  // 512 (compile time mathed)
+#    endif
+#    ifndef OLED_BLOCK_TYPE
+#        define OLED_BLOCK_TYPE uint16_t  // Type to use for segmenting the oled display for smart rendering, use unsigned types only
+#    endif
+#    ifndef OLED_BLOCK_COUNT
+#        define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8)  // 16 (compile time mathed)
+#    endif
+#    ifndef OLED_BLOCK_SIZE
+#        define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)  // 32 (compile time mathed)
+#    endif
+#    ifndef OLED_COM_PINS
+#        define OLED_COM_PINS COM_PINS_SEQ
+#    endif
+
+// For 90 degree rotation, we map our internal matrix to oled matrix using fixed arrays
+// The OLED writes to it's memory horizontally, starting top left, but our memory starts bottom left in this mode
+#    ifndef OLED_SOURCE_MAP
+#        define OLED_SOURCE_MAP \
+            { 0, 8, 16, 24 }
+#    endif
+#    ifndef OLED_TARGET_MAP
+#        define OLED_TARGET_MAP \
+            { 24, 16, 8, 0 }
+#    endif
+// If OLED_BLOCK_TYPE is uint8_t, these tables would look like:
+// #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 }
+// #define OLED_TARGET_MAP { 48, 32, 16, 0, 56, 40, 24, 8 }
+#endif  // defined(OLED_DISPLAY_CUSTOM)
 
 #if !defined(OLED_IC)
-  #define OLED_IC OLED_IC_SSD1306
+#    define OLED_IC OLED_IC_SSD1306
 #endif
 
 // the column address corresponding to the first column in the display hardware
 #if !defined(OLED_COLUMN_OFFSET)
-  #define OLED_COLUMN_OFFSET 0
+#    define OLED_COLUMN_OFFSET 0
 #endif
 
 // Address to use for the i2c oled communication
 #if !defined(OLED_DISPLAY_ADDRESS)
-  #define OLED_DISPLAY_ADDRESS 0x3C
+#    define OLED_DISPLAY_ADDRESS 0x3C
 #endif
 
 // Custom font file to use
 #if !defined(OLED_FONT_H)
-  #define OLED_FONT_H "glcdfont.c"
+#    define OLED_FONT_H "glcdfont.c"
 #endif
 // unsigned char value of the first character in the font file
 #if !defined(OLED_FONT_START)
-  #define OLED_FONT_START 0
+#    define OLED_FONT_START 0
 #endif
 // unsigned char value of the last character in the font file
 #if !defined(OLED_FONT_END)
-  #define OLED_FONT_END 224
+#    define OLED_FONT_END 224
 #endif
 // Font render width
 #if !defined(OLED_FONT_WIDTH)
-  #define OLED_FONT_WIDTH 6
+#    define OLED_FONT_WIDTH 6
 #endif
 // Font render height
 #if !defined(OLED_FONT_HEIGHT)
-  #define OLED_FONT_HEIGHT 8
+#    define OLED_FONT_HEIGHT 8
 #endif
 
 #if !defined(OLED_TIMEOUT)
-  #if defined(OLED_DISABLE_TIMEOUT)
-    #define OLED_TIMEOUT 0
-  #else
-    #define OLED_TIMEOUT 60000
-  #endif
+#    if defined(OLED_DISABLE_TIMEOUT)
+#        define OLED_TIMEOUT 0
+#    else
+#        define OLED_TIMEOUT 60000
+#    endif
 #endif
 
 // OLED Rotation enum values are flags
@@ -151,7 +155,7 @@ typedef enum {
     OLED_ROTATION_0   = 0,
     OLED_ROTATION_90  = 1,
     OLED_ROTATION_180 = 2,
-    OLED_ROTATION_270 = 3, // OLED_ROTATION_90 | OLED_ROTATION_180
+    OLED_ROTATION_270 = 3,  // OLED_ROTATION_90 | OLED_ROTATION_180
 } oled_rotation_t;
 
 // Initialize the oled display, rotating the rendered output based on the define passed in.
@@ -208,15 +212,15 @@ void oled_write_P(const char *data, bool invert);
 // Remapped to call 'void oled_write_ln(const char *data, bool invert);' on ARM
 void oled_write_ln_P(const char *data, bool invert);
 #else
-  // Writes a string to the buffer at current cursor position
-  // Advances the cursor while writing, inverts the pixels if true
-  #define oled_write_P(data, invert) oled_write(data, invert)
-
-  // Writes a string to the buffer at current cursor position
-  // Advances the cursor while writing, inverts the pixels if true
-  // Advances the cursor to the next page, wiring ' ' to the remainder of the current page
-  #define oled_write_ln_P(data, invert) oled_write(data, invert)
-#endif // defined(__AVR__)
+// Writes a string to the buffer at current cursor position
+// Advances the cursor while writing, inverts the pixels if true
+#    define oled_write_P(data, invert) oled_write(data, invert)
+
+// Writes a string to the buffer at current cursor position
+// Advances the cursor while writing, inverts the pixels if true
+// Advances the cursor to the next page, wiring ' ' to the remainder of the current page
+#    define oled_write_ln_P(data, invert) oled_write(data, invert)
+#endif  // defined(__AVR__)
 
 // Can be used to manually turn on the screen if it is off
 // Returns true if the screen was on or turns on
diff --git a/drivers/qwiic/micro_oled.c b/drivers/qwiic/micro_oled.c
index 092dd551e3..597810f339 100644
--- a/drivers/qwiic/micro_oled.c
+++ b/drivers/qwiic/micro_oled.c
@@ -35,16 +35,21 @@
 #include "string.h"
 
 #define TOTALFONTS 2
-const unsigned char * fonts_pointer[]= { font5x7, font8x16 };
+const unsigned char* fonts_pointer[] = {font5x7, font8x16};
 
-uint8_t foreColor,drawMode,fontWidth, fontHeight, fontType, fontStartChar, fontTotalChar, cursorX, cursorY;
+uint8_t  foreColor, drawMode, fontWidth, fontHeight, fontType, fontStartChar, fontTotalChar, cursorX, cursorY;
 uint16_t fontMapWidth;
 
 #define _BV(x) (1 << (x))
-#define swap(a, b) { uint8_t t = a; a = b; b = t; }
+#define swap(a, b)     \
+    {                  \
+        uint8_t t = a; \
+        a         = b; \
+        b         = t; \
+    }
 
-uint8_t micro_oled_transfer_buffer[20];
-static uint8_t micro_oled_screen_current[LCDWIDTH*LCDWIDTH/8] = { 0 };
+uint8_t        micro_oled_transfer_buffer[20];
+static uint8_t micro_oled_screen_current[LCDWIDTH * LCDWIDTH / 8] = {0};
 
 /* LCD Memory organised in 64 horizontal pixel and 6 rows of byte
    B  B .............B  -----
@@ -64,628 +69,399 @@ static uint8_t micro_oled_screen_current[LCDWIDTH*LCDWIDTH/8] = { 0 };
   */
 
 #if LCDWIDTH == 64
-  #if LCDWIDTH == 48
+#    if LCDWIDTH == 48
 static uint8_t micro_oled_screen_buffer[] = {
-// QMK Logo - generated at http://www.majer.ch/lcd/adf_bitmap.php
-//64x48 image
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00,
-0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00,
-0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60, 0x60, 0x60,
-0xF8, 0xFE, 0xFE, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF,
-0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF,
-0xFF, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF, 0xFE,
-0xFE, 0xF8, 0x60, 0x60, 0x60, 0x60, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x8C, 0x8C, 0x8C, 0x8C, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
-0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00,
-0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x8C, 0x8C, 0x8C, 0x8C,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x31, 0x31, 0x31, 0x31, 0xFF, 0xFF,
-0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xF8, 0xF1, 0xE3, 0xE7, 0xCF,
-0xCF, 0xCF, 0xCF, 0x00, 0x00, 0xCF, 0xCF, 0xCF, 0xC7, 0xE7,
-0xE3, 0xF1, 0xF8, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-0x31, 0x31, 0x31, 0x31, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06,
-0x06, 0x06, 0x1F, 0x7F, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF8, 0xF8, 0xFF,
-0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-0xFF, 0x7F, 0x7F, 0x1F, 0x06, 0x06, 0x06, 0x06, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00,
-0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00,
-0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00
-};
-  #endif
+    // QMK Logo - generated at http://www.majer.ch/lcd/adf_bitmap.php
+    // 64x48 image
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60, 0x60, 0x60, 0xF8, 0xFE, 0xFE, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF, 0xFE, 0xFE, 0xF8, 0x60, 0x60, 0x60, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x8C, 0x8C, 0x8C, 0x8C, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x8C, 0x8C, 0x8C, 0x8C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x31, 0x31, 0x31, 0x31, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xF8, 0xF1, 0xE3, 0xE7, 0xCF, 0xCF, 0xCF, 0xCF, 0x00, 0x00, 0xCF, 0xCF, 0xCF, 0xC7, 0xE7, 0xE3, 0xF1, 0xF8, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x31, 0x31, 0x31, 0x31, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06, 0x06, 0x06, 0x1F, 0x7F, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF8, 0xF8, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x7F, 0x7F, 0x1F, 0x06, 0x06, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+#    endif
 #elif LCDWIDTH == 128
-  #if LCDHEIGHT == 32
-     static uint8_t micro_oled_screen_buffer[LCDWIDTH*LCDWIDTH/8] = {
-//128x32 qmk image
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x80, 0xC0, 0xE0, 0xE0, 0xFC, 0xFC, 0xE0, 0xFC, 0xFC,
-0xE0, 0xF0, 0xFC, 0xE0, 0xE0, 0xFC, 0xE0, 0xE0, 0xFC, 0xFC,
-0xE0, 0xE0, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0xF0, 0x10, 0x10, 0x30, 0xE0, 0x00, 0x00,
-0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x80, 0x00, 0x00,
-0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x80, 0x80,
-0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x00, 0x00,
-0x80, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80,
-0x80, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x12, 0xB2, 0xB2, 0xFF,
-0xFF, 0xFF, 0xFF, 0xFF, 0x01, 0x03, 0xFF, 0xFF, 0xFF, 0x03,
-0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0x01, 0x03, 0xFF, 0xFF, 0xFF,
-0xFF, 0xB7, 0xB2, 0xB2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x1F, 0x02, 0x02, 0x03, 0x01, 0x00, 0x06, 0x1F, 0x10,
-0x10, 0x10, 0x1F, 0x06, 0x00, 0x03, 0x1E, 0x18, 0x0F, 0x01,
-0x0F, 0x18, 0x1E, 0x01, 0x00, 0x0F, 0x1F, 0x12, 0x02, 0x12,
-0x13, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x0E, 0x1F, 0x12,
-0x02, 0x12, 0x13, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x10, 0x1F,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x48, 0x4D, 0x4D, 0xFF, 0xFF, 0xFF,
-0xFF, 0xFF, 0xFE, 0xF8, 0xF9, 0xF3, 0xF3, 0xC0, 0x80, 0xF3,
-0xF3, 0xF3, 0xF9, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xED,
-0x4D, 0x4D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0xC0, 0x00, 0x70, 0xC0,
-0x00, 0x80, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x0C,
-0x04, 0x04, 0x04, 0x04, 0x1C, 0xF0, 0x00, 0x00, 0xFC, 0x0C,
-0x38, 0xE0, 0x00, 0x00, 0xC0, 0x38, 0x0C, 0xFC, 0x00, 0x00,
-0xFC, 0xFC, 0x60, 0x90, 0x0C, 0x04, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x07, 0x3F,
-0x3F, 0x07, 0x3F, 0x3F, 0x07, 0x0F, 0x3F, 0x07, 0x07, 0x3F,
-0x07, 0x07, 0x3F, 0x3F, 0x07, 0x07, 0x03, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07,
-0x06, 0x04, 0x04, 0x07, 0x01, 0x00, 0x00, 0x13, 0x1E, 0x03,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x06, 0x04, 0x04,
-0x04, 0x04, 0x07, 0x0D, 0x08, 0x00, 0x07, 0x00, 0x00, 0x01,
-0x07, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x07,
-0x00, 0x01, 0x03, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00
-    };
-  #elif LCDHEIGHT == 64
-    static uint8_t micro_oled_screen_buffer[LCDWIDTH*LCDWIDTH/8] = {
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xC0,
-0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00,
-0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0xC0, 0xC0, 0xC0, 0xC0, 0xF8, 0xFC, 0xFC, 0xFE, 0xFE, 0xFF,
-0x7F, 0x7E, 0xFE, 0xFF, 0xFF, 0xFE, 0xFE, 0x7F, 0x7F, 0xFE,
-0xFE, 0xFF, 0xFF, 0xFE, 0x7E, 0x7F, 0xFF, 0xFE, 0xFE, 0xFC,
-0xFC, 0xF8, 0xC0, 0xC0, 0xC0, 0xC0, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x88, 0x88, 0x88, 0xDD, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00,
-0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF,
-0xFF, 0xFF, 0xFF, 0xDD, 0x88, 0x88, 0x88, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x99, 0x99, 0x99, 0x99, 0xFF, 0xFF, 0xFF, 0xFF,
-0xFF, 0xFF, 0xFE, 0xF8, 0xF0, 0xF3, 0xF3, 0xE7, 0xE7, 0x00,
-0x00, 0xE7, 0xE7, 0xF3, 0xF3, 0xF0, 0xF8, 0xFE, 0xFF, 0xFF,
-0xFF, 0xFF, 0xFF, 0xFF, 0x99, 0x99, 0x99, 0x99, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x0F, 0x1F, 0x3F,
-0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F,
-0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF,
-0x3F, 0x3F, 0x3F, 0x1F, 0x0F, 0x01, 0x01, 0x01, 0x01, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x03, 0x01, 0x00, 0x00, 0x03, 0x01, 0x00,
-0x80, 0x03, 0x03, 0x00, 0x00, 0x01, 0x03, 0x00, 0x80, 0x01,
-0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0xFF, 0x11, 0x11, 0x11, 0x0E, 0x00, 0x70,
-0x88, 0x04, 0x04, 0x04, 0xF8, 0x00, 0x00, 0x3C, 0xE0, 0xC0,
-0x38, 0x1C, 0xE0, 0x80, 0x70, 0x0C, 0x00, 0xF8, 0xAC, 0x24,
-0x24, 0x3C, 0x30, 0x00, 0x00, 0xFC, 0x0C, 0x04, 0x00, 0xF8,
-0xAC, 0x24, 0x24, 0x2C, 0x30, 0x00, 0x70, 0xDC, 0x04, 0x04,
-0x88, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
-0x8C, 0x04, 0x04, 0xF8, 0x00, 0x04, 0x3C, 0xE0, 0x80, 0xF0,
-0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x83, 0x01, 0x01,
-0x01, 0x81, 0xFE, 0x3C, 0x00, 0x00, 0xFF, 0x03, 0x0E, 0x70,
-0xC0, 0xE0, 0x38, 0x06, 0x03, 0xFF, 0x00, 0x00, 0xFF, 0x18,
-0x38, 0x66, 0xC3, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01,
-0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01,
-0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00,
-0x00, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x01, 0x01,
-0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x04, 0x03,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
-0x01, 0x01, 0x01, 0x01, 0x03, 0x02, 0x00, 0x01, 0x00, 0x00,
-0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01,
-0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-    };
-//TODO: generate bitmap of QMK logo here
-  #endif
+#    if LCDHEIGHT == 32
+static uint8_t micro_oled_screen_buffer[LCDWIDTH * LCDWIDTH / 8] = {
+    // 128x32 qmk image
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xC0, 0xE0, 0xE0, 0xFC, 0xFC, 0xE0, 0xFC, 0xFC, 0xE0, 0xF0, 0xFC, 0xE0, 0xE0, 0xFC, 0xE0, 0xE0, 0xFC, 0xFC, 0xE0, 0xE0, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x10, 0x10, 0x30, 0xE0, 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x80, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x00, 0x00, 0x80, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x12, 0xB2, 0xB2, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x01, 0x03, 0xFF, 0xFF, 0xFF, 0x03, 0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0x01, 0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xB7, 0xB2, 0xB2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x02, 0x02, 0x03, 0x01, 0x00, 0x06, 0x1F, 0x10, 0x10, 0x10, 0x1F, 0x06, 0x00, 0x03, 0x1E, 0x18, 0x0F, 0x01, 0x0F, 0x18, 0x1E, 0x01, 0x00, 0x0F, 0x1F, 0x12, 0x02, 0x12, 0x13, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x0E, 0x1F, 0x12, 0x02, 0x12, 0x13, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x48, 0x4D, 0x4D, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0xF8, 0xF9, 0xF3, 0xF3, 0xC0, 0x80, 0xF3, 0xF3, 0xF3, 0xF9, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xED, 0x4D, 0x4D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0xC0, 0x00, 0x70, 0xC0, 0x00, 0x80, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x0C, 0x04, 0x04, 0x04, 0x04, 0x1C, 0xF0, 0x00, 0x00, 0xFC, 0x0C, 0x38, 0xE0, 0x00, 0x00, 0xC0, 0x38, 0x0C, 0xFC, 0x00, 0x00, 0xFC, 0xFC, 0x60, 0x90, 0x0C, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x07, 0x3F, 0x3F, 0x07, 0x3F, 0x3F, 0x07, 0x0F, 0x3F, 0x07, 0x07, 0x3F, 0x07, 0x07, 0x3F, 0x3F, 0x07, 0x07, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x06, 0x04, 0x04, 0x07, 0x01, 0x00, 0x00, 0x13, 0x1E, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x06, 0x04, 0x04, 0x04, 0x04, 0x07, 0x0D, 0x08, 0x00, 0x07, 0x00, 0x00, 0x01, 0x07, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x07, 0x00, 0x01, 0x03, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+#    elif LCDHEIGHT == 64
+static uint8_t micro_oled_screen_buffer[LCDWIDTH * LCDWIDTH / 8] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+                                                                    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xC0, 0xC0, 0xC0, 0xF8, 0xFC, 0xFC, 0xFE, 0xFE, 0xFF, 0x7F, 0x7E, 0xFE, 0xFF, 0xFF, 0xFE, 0xFE, 0x7F, 0x7F, 0xFE, 0xFE, 0xFF, 0xFF, 0xFE, 0x7E, 0x7F, 0xFF, 0xFE, 0xFE, 0xFC, 0xFC, 0xF8, 0xC0, 0xC0, 0xC0, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+                                                                    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x88, 0x88, 0xDD, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xDD, 0x88, 0x88, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+                                                                    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x99, 0x99, 0x99, 0x99, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0xF8, 0xF0, 0xF3, 0xF3, 0xE7, 0xE7, 0x00, 0x00, 0xE7, 0xE7, 0xF3, 0xF3, 0xF0, 0xF8, 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x99, 0x99, 0x99, 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+                                                                    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x0F, 0x1F, 0x3F, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0x3F, 0x1F, 0x0F, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+                                                                    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x01, 0x00, 0x00, 0x03, 0x01, 0x00, 0x80, 0x03, 0x03, 0x00, 0x00, 0x01, 0x03, 0x00, 0x80, 0x01, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+                                                                    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0x11, 0x11, 0x11, 0x0E, 0x00, 0x70, 0x88, 0x04, 0x04, 0x04, 0xF8, 0x00, 0x00, 0x3C, 0xE0, 0xC0, 0x38, 0x1C, 0xE0, 0x80, 0x70, 0x0C, 0x00, 0xF8, 0xAC, 0x24, 0x24, 0x3C, 0x30, 0x00, 0x00, 0xFC, 0x0C, 0x04, 0x00, 0xF8, 0xAC, 0x24, 0x24, 0x2C, 0x30, 0x00, 0x70, 0xDC, 0x04, 0x04, 0x88, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0x8C, 0x04, 0x04, 0xF8, 0x00, 0x04, 0x3C, 0xE0, 0x80, 0xF0, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x83, 0x01, 0x01, 0x01, 0x81, 0xFE, 0x3C, 0x00, 0x00, 0xFF, 0x03, 0x0E, 0x70, 0xC0, 0xE0, 0x38, 0x06, 0x03, 0xFF, 0x00, 0x00, 0xFF, 0x18, 0x38, 0x66, 0xC3, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+                                                                    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x03, 0x02, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+                                                                    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+// TODO: generate bitmap of QMK logo here
+#    endif
 #else
-//catchall for custom screen szies
-    static uint8_t micro_oled_screen_buffer[LCDWIDTH*LCDWIDTH/8] = {0};
+// catchall for custom screen szies
+static uint8_t micro_oled_screen_buffer[LCDWIDTH * LCDWIDTH / 8] = {0};
 #endif
 
-
-
 void micro_oled_init(void) {
-  i2c_init();
-  i2c_start(I2C_ADDRESS_SA0_1);
+    i2c_init();
+    i2c_start(I2C_ADDRESS_SA0_1);
 
-  // Display Init sequence for 64x48 OLED module
-  send_command(DISPLAYOFF);      // 0xAE
+    // Display Init sequence for 64x48 OLED module
+    send_command(DISPLAYOFF);  // 0xAE
 
-  send_command(SETDISPLAYCLOCKDIV);  // 0xD5
-  send_command(0x80);          // the suggested ratio 0x80
+    send_command(SETDISPLAYCLOCKDIV);  // 0xD5
+    send_command(0x80);                // the suggested ratio 0x80
 
-  send_command(SETMULTIPLEX);      // 0xA8
-  send_command(LCDHEIGHT - 1);
+    send_command(SETMULTIPLEX);  // 0xA8
+    send_command(LCDHEIGHT - 1);
 
-  send_command(SETDISPLAYOFFSET);    // 0xD3
-  send_command(0x00);         // no offset
+    send_command(SETDISPLAYOFFSET);  // 0xD3
+    send_command(0x00);              // no offset
 
-  send_command(SETSTARTLINE | 0x00);  // line #0
+    send_command(SETSTARTLINE | 0x00);  // line #0
 
-  send_command(CHARGEPUMP);      // enable charge pump
-  send_command(0x14);
+    send_command(CHARGEPUMP);  // enable charge pump
+    send_command(0x14);
 
-  send_command(NORMALDISPLAY);     // 0xA6
-  send_command(DISPLAYALLONRESUME);  // 0xA4
+    send_command(NORMALDISPLAY);       // 0xA6
+    send_command(DISPLAYALLONRESUME);  // 0xA4
 
-//display at regular orientation
-  send_command(SEGREMAP | 0x1);
-  send_command(COMSCANDEC);
+    // display at regular orientation
+    send_command(SEGREMAP | 0x1);
+    send_command(COMSCANDEC);
 
-//rotate display 180
+// rotate display 180
 #ifdef micro_oled_rotate_180
-  send_command(SEGREMAP);
-  send_command(COMSCANINC);
+    send_command(SEGREMAP);
+    send_command(COMSCANINC);
 #endif
 
-  send_command(MEMORYMODE);
-  send_command(0x10);
+    send_command(MEMORYMODE);
+    send_command(0x10);
 
-  send_command(SETCOMPINS);      // 0xDA
-if (LCDHEIGHT > 32) {
-  send_command(0x12);
-} else {
-  send_command(0x02);
-}
-  send_command(SETCONTRAST);     // 0x81
-  send_command(0x8F);
+    send_command(SETCOMPINS);  // 0xDA
+    if (LCDHEIGHT > 32) {
+        send_command(0x12);
+    } else {
+        send_command(0x02);
+    }
+    send_command(SETCONTRAST);  // 0x81
+    send_command(0x8F);
 
-  send_command(SETPRECHARGE);      // 0xd9
-  send_command(0xF1);
+    send_command(SETPRECHARGE);  // 0xd9
+    send_command(0xF1);
 
-  send_command(SETVCOMDESELECT);     // 0xDB
-  send_command(0x40);
+    send_command(SETVCOMDESELECT);  // 0xDB
+    send_command(0x40);
 
-  send_command(DISPLAYON);       //--turn on oled panel
-  clear_screen();           // Erase hardware memory inside the OLED controller to avoid random data in memory.
-  send_buffer();
+    send_command(DISPLAYON);  //--turn on oled panel
+    clear_screen();           // Erase hardware memory inside the OLED controller to avoid random data in memory.
+    send_buffer();
 }
 
 void send_command(uint8_t command) {
-  micro_oled_transfer_buffer[0] = I2C_COMMAND;
-  micro_oled_transfer_buffer[1] = command;
-  i2c_transmit(I2C_ADDRESS_SA0_1 << 1, micro_oled_transfer_buffer, 2, 100);
+    micro_oled_transfer_buffer[0] = I2C_COMMAND;
+    micro_oled_transfer_buffer[1] = command;
+    i2c_transmit(I2C_ADDRESS_SA0_1 << 1, micro_oled_transfer_buffer, 2, 100);
 }
 
 void send_data(uint8_t data) {
-  micro_oled_transfer_buffer[0] = I2C_DATA;
-  micro_oled_transfer_buffer[1] = data;
-  i2c_transmit(I2C_ADDRESS_SA0_1 << 1, micro_oled_transfer_buffer, 2, 100);
+    micro_oled_transfer_buffer[0] = I2C_DATA;
+    micro_oled_transfer_buffer[1] = data;
+    i2c_transmit(I2C_ADDRESS_SA0_1 << 1, micro_oled_transfer_buffer, 2, 100);
 }
 
 /** \brief Set SSD1306 page address.
     Send page address command and address to the SSD1306 OLED controller.
 */
 void set_page_address(uint8_t address) {
-  address = (0xB0 | address);
-  send_command(address);
+    address = (0xB0 | address);
+    send_command(address);
 }
 
 /** \brief Set SSD1306 column address.
     Send column address command and address to the SSD1306 OLED controller.
 */
 void set_column_address(uint8_t address) {
-  send_command( ( 0x10 | (address >> 4) ) + ((128 - LCDWIDTH) >> 8) );
-  send_command( 0x0F & address );
+    send_command((0x10 | (address >> 4)) + ((128 - LCDWIDTH) >> 8));
+    send_command(0x0F & address);
 }
 
 /** \brief Clear SSD1306's memory.
     To clear GDRAM inside the LCD controller.
 */
 void clear_screen(void) {
-  for (int i=0;i<8; i++) {
-    set_page_address(i);
-    set_column_address(0);
-    for (int j=0; j<0x80; j++) {
-      send_data(0);
+    for (int i = 0; i < 8; i++) {
+        set_page_address(i);
+        set_column_address(0);
+        for (int j = 0; j < 0x80; j++) {
+            send_data(0);
+        }
     }
-  }
 }
 
 /** \brief Clear SSD1306's memory.
     To clear GDRAM inside the LCD controller.
 */
 void clear_buffer(void) {
-//384
-  memset(micro_oled_screen_buffer, 0, LCDWIDTH*LCDWIDTH/8);
+    // 384
+    memset(micro_oled_screen_buffer, 0, LCDWIDTH * LCDWIDTH / 8);
 }
 
 /** \brief Invert display.
     The PIXEL_ON color of the display will turn to PIXEL_OFF and the PIXEL_OFF will turn to PIXEL_ON.
 */
 void invert_screen(bool invert) {
-  if (invert) {
-    send_command(INVERTDISPLAY);
-  } else {
-    send_command(NORMALDISPLAY);
-  }
+    if (invert) {
+        send_command(INVERTDISPLAY);
+    } else {
+        send_command(NORMALDISPLAY);
+    }
 }
 
 /** \brief Set contrast.
     OLED contract value from 0 to 255. Note: Contrast level is not very obvious.
 */
 void set_contrast(uint8_t contrast) {
-  send_command(SETCONTRAST);     // 0x81
-  send_command(contrast);
+    send_command(SETCONTRAST);  // 0x81
+    send_command(contrast);
 }
 
 /** \brief Transfer display buffer.
   Sends the updated buffer to the controller - the current status is checked before to save i2c exectution time
 */
 void send_buffer(void) {
-  uint8_t i, j;
-
-  uint8_t page_addr = 0xFF;
-  for (i = 0; i < LCDHEIGHT/8; i++) {
-    uint8_t col_addr = 0xFF;
-    for (j = 0; j < LCDWIDTH; j++) {
-      if (micro_oled_screen_buffer[i*LCDWIDTH+j] != micro_oled_screen_current[i*LCDWIDTH+j]) {
-        if (page_addr != i) {
-          set_page_address(i);
+    uint8_t i, j;
+
+    uint8_t page_addr = 0xFF;
+    for (i = 0; i < LCDHEIGHT / 8; i++) {
+        uint8_t col_addr = 0xFF;
+        for (j = 0; j < LCDWIDTH; j++) {
+            if (micro_oled_screen_buffer[i * LCDWIDTH + j] != micro_oled_screen_current[i * LCDWIDTH + j]) {
+                if (page_addr != i) {
+                    set_page_address(i);
+                }
+                if (col_addr != j) {
+                    set_column_address(j);
+                }
+                send_data(micro_oled_screen_buffer[i * LCDWIDTH + j]);
+                micro_oled_screen_current[i * LCDWIDTH + j] = micro_oled_screen_buffer[i * LCDWIDTH + j];
+                col_addr                                    = j + 1;
+            }
         }
-        if (col_addr != j) {
-          set_column_address(j);
-        }
-        send_data(micro_oled_screen_buffer[i*LCDWIDTH+j]);
-        micro_oled_screen_current[i*LCDWIDTH+j] = micro_oled_screen_buffer[i*LCDWIDTH+j];
-        col_addr = j + 1;
-      }
     }
-  }
 }
 
 /** \brief Draw pixel with color and mode.
   Draw color pixel in the screen buffer's x,y position with NORM or XOR draw mode.
 */
 void draw_pixel(uint8_t x, uint8_t y, uint8_t color, uint8_t mode) {
-  if ((x<0) ||  (x>=LCDWIDTH) || (y<0) || (y>=LCDHEIGHT))
-    return;
-
-  if (mode == XOR) {
-    if (color == PIXEL_ON)
-      micro_oled_screen_buffer[x + (y/8)*LCDWIDTH] ^= _BV((y%8));
-  } else {
-    if (color == PIXEL_ON)
-      micro_oled_screen_buffer[x + (y/8)*LCDWIDTH] |= _BV((y%8));
-    else
-      micro_oled_screen_buffer[x + (y/8)*LCDWIDTH] &= ~_BV((y%8));
-  }
+    if ((x < 0) || (x >= LCDWIDTH) || (y < 0) || (y >= LCDHEIGHT)) return;
+
+    if (mode == XOR) {
+        if (color == PIXEL_ON) micro_oled_screen_buffer[x + (y / 8) * LCDWIDTH] ^= _BV((y % 8));
+    } else {
+        if (color == PIXEL_ON)
+            micro_oled_screen_buffer[x + (y / 8) * LCDWIDTH] |= _BV((y % 8));
+        else
+            micro_oled_screen_buffer[x + (y / 8) * LCDWIDTH] &= ~_BV((y % 8));
+    }
 }
 
 /** \brief Draw line with color and mode.
 Draw line using color and mode from x0,y0 to x1,y1 of the screen buffer.
 */
 void draw_line(uint8_t x0, uint8_t y0, uint8_t x1, uint8_t y1, uint8_t color, uint8_t mode) {
-  uint8_t steep = abs(y1 - y0) > abs(x1 - x0);
-  if (steep) {
-    swap(x0, y0);
-    swap(x1, y1);
-  }
-
-  if (x0 > x1) {
-    swap(x0, x1);
-    swap(y0, y1);
-  }
-
-  uint8_t dx, dy;
-  dx = x1 - x0;
-  dy = abs(y1 - y0);
-
-  int8_t err = dx / 2;
-  int8_t ystep;
-
-  if (y0 < y1) {
-    ystep = 1;
-  } else {
-    ystep = -1;}
-
-  for (; x0<x1; x0++) {
+    uint8_t steep = abs(y1 - y0) > abs(x1 - x0);
     if (steep) {
-      draw_pixel(y0, x0, color, mode);
+        swap(x0, y0);
+        swap(x1, y1);
+    }
+
+    if (x0 > x1) {
+        swap(x0, x1);
+        swap(y0, y1);
+    }
+
+    uint8_t dx, dy;
+    dx = x1 - x0;
+    dy = abs(y1 - y0);
+
+    int8_t err = dx / 2;
+    int8_t ystep;
+
+    if (y0 < y1) {
+        ystep = 1;
     } else {
-      draw_pixel(x0, y0, color, mode);
+        ystep = -1;
     }
-    err -= dy;
-    if (err < 0) {
-      y0 += ystep;
-      err += dx;
+
+    for (; x0 < x1; x0++) {
+        if (steep) {
+            draw_pixel(y0, x0, color, mode);
+        } else {
+            draw_pixel(x0, y0, color, mode);
+        }
+        err -= dy;
+        if (err < 0) {
+            y0 += ystep;
+            err += dx;
+        }
     }
-  }
 }
 
 /** \brief Draw horizontal line with color and mode.
 Draw horizontal line using color and mode from x,y to x+width,y of the screen buffer.
 */
-void draw_line_hori(uint8_t x, uint8_t y, uint8_t width, uint8_t color, uint8_t mode) {
-  draw_line(x,y,x+width,y,color,mode);
-}
+void draw_line_hori(uint8_t x, uint8_t y, uint8_t width, uint8_t color, uint8_t mode) { draw_line(x, y, x + width, y, color, mode); }
 
 /** \brief Draw vertical line.
 Draw vertical line using current fore color and current draw mode from x,y to x,y+height of the screen buffer.
 */
-void draw_line_vert(uint8_t x, uint8_t y, uint8_t height, bool color, uint8_t mode) {
-  draw_line(x,y,x,y+height,color,mode);
-}
+void draw_line_vert(uint8_t x, uint8_t y, uint8_t height, bool color, uint8_t mode) { draw_line(x, y, x, y + height, color, mode); }
 
 /** \brief Draw rectangle with color and mode.
 Draw rectangle using color and mode from x,y to x+width,y+height of the screen buffer.
 */
 void draw_rect(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) {
-  uint8_t tempHeight;
+    uint8_t tempHeight;
 
-  draw_line_hori(x,y, width, color, mode);
-  draw_line_hori(x,y+height-1, width, color, mode);
+    draw_line_hori(x, y, width, color, mode);
+    draw_line_hori(x, y + height - 1, width, color, mode);
 
-  tempHeight=height-2;
+    tempHeight = height - 2;
 
-  // skip drawing vertical lines to avoid overlapping of pixel that will
-  // affect XOR plot if no pixel in between horizontal lines
-  if (tempHeight<1) return;
+    // skip drawing vertical lines to avoid overlapping of pixel that will
+    // affect XOR plot if no pixel in between horizontal lines
+    if (tempHeight < 1) return;
 
-  draw_line_vert(x,y+1, tempHeight, color, mode);
-  draw_line_vert(x+width-1, y+1, tempHeight, color, mode);
+    draw_line_vert(x, y + 1, tempHeight, color, mode);
+    draw_line_vert(x + width - 1, y + 1, tempHeight, color, mode);
 }
 
 /** \brief Draw rectangle with color and mode.
 Draw rectangle using color and mode from x,y to x+width,y+height of the screen buffer.
 */
 void draw_rect_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) {
-  uint8_t tempHeight;
+    uint8_t tempHeight;
 
-  draw_line_hori(x+1,y, width-2, color, mode);
-  draw_line_hori(x+1,y+height-1, width-2, color, mode);
+    draw_line_hori(x + 1, y, width - 2, color, mode);
+    draw_line_hori(x + 1, y + height - 1, width - 2, color, mode);
 
-  tempHeight=height-2;
+    tempHeight = height - 2;
 
-  // skip drawing vertical lines to avoid overlapping of pixel that will
-  // affect XOR plot if no pixel in between horizontal lines
-  if (tempHeight<1) return;
+    // skip drawing vertical lines to avoid overlapping of pixel that will
+    // affect XOR plot if no pixel in between horizontal lines
+    if (tempHeight < 1) return;
 
-  draw_line_vert(x,y+1, tempHeight, color, mode);
-  draw_line_vert(x+width-1, y+1, tempHeight, color, mode);
+    draw_line_vert(x, y + 1, tempHeight, color, mode);
+    draw_line_vert(x + width - 1, y + 1, tempHeight, color, mode);
 }
 
 /** \brief Draw filled rectangle with color and mode.
 Draw filled rectangle using color and mode from x,y to x+width,y+height of the screen buffer.
 */
 void draw_rect_filled(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) {
-  // TODO - need to optimise the memory map draw so that this function will not call pixel one by one
-  for (int i=x; i<x+width;i++) {
-    draw_line_vert(i,y, height, color, mode);
-  }
+    // TODO - need to optimise the memory map draw so that this function will not call pixel one by one
+    for (int i = x; i < x + width; i++) {
+        draw_line_vert(i, y, height, color, mode);
+    }
 }
 
 /** \brief Draw filled rectangle with color and mode.
 Draw filled rectangle using color and mode from x,y to x+width,y+height of the screen buffer.
 */
 void draw_rect_filled_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) {
-  // TODO - need to optimise the memory map draw so that this function will not call pixel one by one
-  for (int i=x; i<x+width;i++) {
-    if (i == x || i == (x + width - 1))
-      draw_line_vert(i, y+1, height-2, color, mode);
-    else
-      draw_line_vert(i, y, height, color, mode);
-  }
+    // TODO - need to optimise the memory map draw so that this function will not call pixel one by one
+    for (int i = x; i < x + width; i++) {
+        if (i == x || i == (x + width - 1))
+            draw_line_vert(i, y + 1, height - 2, color, mode);
+        else
+            draw_line_vert(i, y, height, color, mode);
+    }
 }
 
 /** \brief Draw character with color and mode.
   Draw character c using color and draw mode at x,y.
 */
 void draw_char(uint8_t x, uint8_t y, uint8_t c, uint8_t color, uint8_t mode, uint8_t font) {
-  // TODO - New routine to take font of any height, at the moment limited to font height in multiple of 8 pixels
-
-  uint8_t rowsToDraw,row, tempC;
-  uint8_t i,j,temp;
-  uint16_t charPerBitmapRow,charColPositionOnBitmap,charRowPositionOnBitmap,charBitmapStartPosition;
-
-  if ((font>=TOTALFONTS) || (font<0))
-    return;
-
-  uint8_t fontType = font;
-  uint8_t fontWidth = pgm_read_byte(fonts_pointer[fontType]+0);
-  uint8_t fontHeight = pgm_read_byte(fonts_pointer[fontType]+1);
-  uint8_t fontStartChar = pgm_read_byte(fonts_pointer[fontType]+2);
-  uint8_t fontTotalChar = pgm_read_byte(fonts_pointer[fontType]+3);
-  uint16_t fontMapWidth = (pgm_read_byte(fonts_pointer[fontType]+4)*100)+pgm_read_byte(fonts_pointer[fontType]+5); // two bytes values into integer 16
-
-  if ((c<fontStartChar) || (c>(fontStartChar+fontTotalChar-1)))   // no bitmap for the required c
-    return;
-
-  tempC=c-fontStartChar;
-
-  // each row (in datasheet is call page) is 8 bits high, 16 bit high character will have 2 rows to be drawn
-  rowsToDraw=fontHeight/8;  // 8 is LCD's page size, see SSD1306 datasheet
-  if (rowsToDraw<=1) rowsToDraw=1;
-
-  // the following draw function can draw anywhere on the screen, but SLOW pixel by pixel draw
-  if (rowsToDraw==1) {
-    for  (i=0;i<fontWidth+1;i++) {
-      if (i==fontWidth) // this is done in a weird way because for 5x7 font, there is no margin, this code add a margin after col 5
-      temp=0;
-      else
-      temp=pgm_read_byte(fonts_pointer[fontType]+FONTHEADERSIZE+(tempC*fontWidth)+i);
-
-      for (j=0;j<8;j++) {     // 8 is the LCD's page height (see datasheet for explanation)
-        if (temp & 0x1) {
-          draw_pixel(x+i, y+j, color,mode);
+    // TODO - New routine to take font of any height, at the moment limited to font height in multiple of 8 pixels
+
+    uint8_t  rowsToDraw, row, tempC;
+    uint8_t  i, j, temp;
+    uint16_t charPerBitmapRow, charColPositionOnBitmap, charRowPositionOnBitmap, charBitmapStartPosition;
+
+    if ((font >= TOTALFONTS) || (font < 0)) return;
+
+    uint8_t  fontType      = font;
+    uint8_t  fontWidth     = pgm_read_byte(fonts_pointer[fontType] + 0);
+    uint8_t  fontHeight    = pgm_read_byte(fonts_pointer[fontType] + 1);
+    uint8_t  fontStartChar = pgm_read_byte(fonts_pointer[fontType] + 2);
+    uint8_t  fontTotalChar = pgm_read_byte(fonts_pointer[fontType] + 3);
+    uint16_t fontMapWidth  = (pgm_read_byte(fonts_pointer[fontType] + 4) * 100) + pgm_read_byte(fonts_pointer[fontType] + 5);  // two bytes values into integer 16
+
+    if ((c < fontStartChar) || (c > (fontStartChar + fontTotalChar - 1)))  // no bitmap for the required c
+        return;
+
+    tempC = c - fontStartChar;
+
+    // each row (in datasheet is call page) is 8 bits high, 16 bit high character will have 2 rows to be drawn
+    rowsToDraw = fontHeight / 8;  // 8 is LCD's page size, see SSD1306 datasheet
+    if (rowsToDraw <= 1) rowsToDraw = 1;
+
+    // the following draw function can draw anywhere on the screen, but SLOW pixel by pixel draw
+    if (rowsToDraw == 1) {
+        for (i = 0; i < fontWidth + 1; i++) {
+            if (i == fontWidth)  // this is done in a weird way because for 5x7 font, there is no margin, this code add a margin after col 5
+                temp = 0;
+            else
+                temp = pgm_read_byte(fonts_pointer[fontType] + FONTHEADERSIZE + (tempC * fontWidth) + i);
+
+            for (j = 0; j < 8; j++) {  // 8 is the LCD's page height (see datasheet for explanation)
+                if (temp & 0x1) {
+                    draw_pixel(x + i, y + j, color, mode);
+                } else {
+                    draw_pixel(x + i, y + j, !color, mode);
+                }
+
+                temp >>= 1;
+            }
         }
-        else {
-          draw_pixel(x+i, y+j, !color,mode);
-        }
-
-        temp >>=1;
-      }
+        return;
     }
-    return;
-  }
-
-  // font height over 8 bit
-  // take character "0" ASCII 48 as example
-  charPerBitmapRow = fontMapWidth/fontWidth;  // 256/8 =32 char per row
-  charColPositionOnBitmap = tempC % charPerBitmapRow;  // =16
-  charRowPositionOnBitmap = (int)(tempC/charPerBitmapRow); // =1
-  charBitmapStartPosition = (charRowPositionOnBitmap * fontMapWidth * (fontHeight/8)) + (charColPositionOnBitmap * fontWidth) ;
-
-  // each row on LCD is 8 bit height (see datasheet for explanation)
-  for(row=0;row<rowsToDraw;row++) {
-    for (i=0; i<fontWidth;i++) {
-      temp=pgm_read_byte(fonts_pointer[fontType]+FONTHEADERSIZE+(charBitmapStartPosition+i+(row*fontMapWidth)));
-      for (j=0;j<8;j++) {     // 8 is the LCD's page height (see datasheet for explanation)
-        if (temp & 0x1) {
-          draw_pixel(x+i,y+j+(row*8), color, mode);
-        }
-        else {
-          draw_pixel(x+i,y+j+(row*8), !color, mode);
+
+    // font height over 8 bit
+    // take character "0" ASCII 48 as example
+    charPerBitmapRow        = fontMapWidth / fontWidth;         // 256/8 =32 char per row
+    charColPositionOnBitmap = tempC % charPerBitmapRow;         // =16
+    charRowPositionOnBitmap = (int)(tempC / charPerBitmapRow);  // =1
+    charBitmapStartPosition = (charRowPositionOnBitmap * fontMapWidth * (fontHeight / 8)) + (charColPositionOnBitmap * fontWidth);
+
+    // each row on LCD is 8 bit height (see datasheet for explanation)
+    for (row = 0; row < rowsToDraw; row++) {
+        for (i = 0; i < fontWidth; i++) {
+            temp = pgm_read_byte(fonts_pointer[fontType] + FONTHEADERSIZE + (charBitmapStartPosition + i + (row * fontMapWidth)));
+            for (j = 0; j < 8; j++) {  // 8 is the LCD's page height (see datasheet for explanation)
+                if (temp & 0x1) {
+                    draw_pixel(x + i, y + j + (row * 8), color, mode);
+                } else {
+                    draw_pixel(x + i, y + j + (row * 8), !color, mode);
+                }
+                temp >>= 1;
+            }
         }
-        temp >>=1;
-      }
     }
-  }
-
 }
 
-void draw_string(uint8_t x, uint8_t y, char * string, uint8_t color, uint8_t mode, uint8_t font) {
-
-  if ((font>=TOTALFONTS) || (font<0))
-    return;
+void draw_string(uint8_t x, uint8_t y, char* string, uint8_t color, uint8_t mode, uint8_t font) {
+    if ((font >= TOTALFONTS) || (font < 0)) return;
 
-  uint8_t fontType = font;
-  uint8_t fontWidth = pgm_read_byte(fonts_pointer[fontType]+0);
-
-  uint8_t cur_x = x;
-  for (int i = 0; i < strlen(string); i++) {
-    draw_char(cur_x, y, string[i], color, mode, font);
-    cur_x += fontWidth + 1;
-  }
+    uint8_t fontType  = font;
+    uint8_t fontWidth = pgm_read_byte(fonts_pointer[fontType] + 0);
 
+    uint8_t cur_x = x;
+    for (int i = 0; i < strlen(string); i++) {
+        draw_char(cur_x, y, string[i], color, mode, font);
+        cur_x += fontWidth + 1;
+    }
 }
diff --git a/drivers/qwiic/micro_oled.h b/drivers/qwiic/micro_oled.h
index 5d6a1029ed..814143df11 100644
--- a/drivers/qwiic/micro_oled.h
+++ b/drivers/qwiic/micro_oled.h
@@ -49,86 +49,86 @@ void draw_rect_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t
 void draw_rect_filled(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode);
 void draw_rect_filled_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode);
 void draw_char(uint8_t x, uint8_t y, uint8_t c, uint8_t color, uint8_t mode, uint8_t font);
-void draw_string(uint8_t x, uint8_t y, char * string, uint8_t color, uint8_t mode, uint8_t font);
+void draw_string(uint8_t x, uint8_t y, char* string, uint8_t color, uint8_t mode, uint8_t font);
 
 #define I2C_ADDRESS_SA0_0 0b0111100
 #ifndef I2C_ADDRESS_SA0_1
-#define I2C_ADDRESS_SA0_1 0b0111101
+#    define I2C_ADDRESS_SA0_1 0b0111101
 #endif
 #define I2C_COMMAND 0x00
 #define I2C_DATA 0x40
 #define PIXEL_OFF 0
-#define PIXEL_ON  1
+#define PIXEL_ON 1
 
 #ifndef LCDWIDTH
-#define LCDWIDTH      64
+#    define LCDWIDTH 64
 #endif
 #ifndef LCDWIDTH
-#define LCDHEIGHT     48
+#    define LCDHEIGHT 48
 #endif
-#define FONTHEADERSIZE    6
+#define FONTHEADERSIZE 6
 
-#define NORM        0
-#define XOR         1
+#define NORM 0
+#define XOR 1
 
-#define PAGE        0
-#define ALL         1
+#define PAGE 0
+#define ALL 1
 
-#define WIDGETSTYLE0      0
-#define WIDGETSTYLE1      1
-#define WIDGETSTYLE2      2
+#define WIDGETSTYLE0 0
+#define WIDGETSTYLE1 1
+#define WIDGETSTYLE2 2
 
-#define SETCONTRAST     0x81
-#define DISPLAYALLONRESUME  0xA4
-#define DISPLAYALLON    0xA5
-#define NORMALDISPLAY     0xA6
-#define INVERTDISPLAY     0xA7
-#define DISPLAYOFF      0xAE
-#define DISPLAYON       0xAF
-#define SETDISPLAYOFFSET  0xD3
-#define SETCOMPINS      0xDA
-#define SETVCOMDESELECT   0xDB
-#define SETDISPLAYCLOCKDIV  0xD5
-#define SETPRECHARGE    0xD9
-#define SETMULTIPLEX    0xA8
-#define SETLOWCOLUMN    0x00
-#define SETHIGHCOLUMN     0x10
-#define SETSTARTLINE    0x40
-#define MEMORYMODE      0x20
-#define COMSCANINC      0xC0
-#define COMSCANDEC      0xC8
-#define SEGREMAP      0xA0
-#define CHARGEPUMP      0x8D
-#define EXTERNALVCC     0x01
-#define SWITCHCAPVCC    0x02
+#define SETCONTRAST 0x81
+#define DISPLAYALLONRESUME 0xA4
+#define DISPLAYALLON 0xA5
+#define NORMALDISPLAY 0xA6
+#define INVERTDISPLAY 0xA7
+#define DISPLAYOFF 0xAE
+#define DISPLAYON 0xAF
+#define SETDISPLAYOFFSET 0xD3
+#define SETCOMPINS 0xDA
+#define SETVCOMDESELECT 0xDB
+#define SETDISPLAYCLOCKDIV 0xD5
+#define SETPRECHARGE 0xD9
+#define SETMULTIPLEX 0xA8
+#define SETLOWCOLUMN 0x00
+#define SETHIGHCOLUMN 0x10
+#define SETSTARTLINE 0x40
+#define MEMORYMODE 0x20
+#define COMSCANINC 0xC0
+#define COMSCANDEC 0xC8
+#define SEGREMAP 0xA0
+#define CHARGEPUMP 0x8D
+#define EXTERNALVCC 0x01
+#define SWITCHCAPVCC 0x02
 
 // Scroll
-#define ACTIVATESCROLL          0x2F
-#define DEACTIVATESCROLL        0x2E
-#define SETVERTICALSCROLLAREA       0xA3
-#define RIGHTHORIZONTALSCROLL       0x26
-#define LEFT_HORIZONTALSCROLL       0x27
+#define ACTIVATESCROLL 0x2F
+#define DEACTIVATESCROLL 0x2E
+#define SETVERTICALSCROLLAREA 0xA3
+#define RIGHTHORIZONTALSCROLL 0x26
+#define LEFT_HORIZONTALSCROLL 0x27
 #define VERTICALRIGHTHORIZONTALSCROLL 0x29
-#define VERTICALLEFTHORIZONTALSCROLL  0x2A
+#define VERTICALLEFTHORIZONTALSCROLL 0x2A
 
 typedef enum CMD {
-  CMD_CLEAR,      //0
-  CMD_INVERT,     //1
-  CMD_CONTRAST,   //2
-  CMD_DISPLAY,    //3
-  CMD_SETCURSOR,    //4
-  CMD_PIXEL,      //5
-  CMD_LINE,     //6
-  CMD_LINEH,      //7
-  CMD_LINEV,      //8
-  CMD_RECT,     //9
-  CMD_RECTFILL,   //10
-  CMD_CIRCLE,     //11
-  CMD_CIRCLEFILL,   //12
-  CMD_DRAWCHAR,   //13
-  CMD_DRAWBITMAP,   //14
-  CMD_GETLCDWIDTH,  //15
-  CMD_GETLCDHEIGHT, //16
-  CMD_SETCOLOR,   //17
-  CMD_SETDRAWMODE   //18
+    CMD_CLEAR,         // 0
+    CMD_INVERT,        // 1
+    CMD_CONTRAST,      // 2
+    CMD_DISPLAY,       // 3
+    CMD_SETCURSOR,     // 4
+    CMD_PIXEL,         // 5
+    CMD_LINE,          // 6
+    CMD_LINEH,         // 7
+    CMD_LINEV,         // 8
+    CMD_RECT,          // 9
+    CMD_RECTFILL,      // 10
+    CMD_CIRCLE,        // 11
+    CMD_CIRCLEFILL,    // 12
+    CMD_DRAWCHAR,      // 13
+    CMD_DRAWBITMAP,    // 14
+    CMD_GETLCDWIDTH,   // 15
+    CMD_GETLCDHEIGHT,  // 16
+    CMD_SETCOLOR,      // 17
+    CMD_SETDRAWMODE    // 18
 } commCommand_t;
 \ No newline at end of file
diff --git a/drivers/qwiic/qwiic.c b/drivers/qwiic/qwiic.c
index 9047919927..316d6539cb 100644
--- a/drivers/qwiic/qwiic.c
+++ b/drivers/qwiic/qwiic.c
@@ -16,16 +16,16 @@
 #include "qwiic.h"
 
 void qwiic_init(void) {
-  #ifdef QWIIC_JOYSTIIC_ENABLE
+#ifdef QWIIC_JOYSTIIC_ENABLE
     joystiic_init();
-  #endif
-  #ifdef QWIIC_MICRO_OLED_ENABLE
+#endif
+#ifdef QWIIC_MICRO_OLED_ENABLE
     micro_oled_init();
-  #endif
+#endif
 }
 
 void qwiic_task(void) {
-  #ifdef QWIIC_JOYSTIIC_ENABLE
+#ifdef QWIIC_JOYSTIIC_ENABLE
     joystiic_task();
-  #endif
+#endif
 }
diff --git a/drivers/qwiic/qwiic.h b/drivers/qwiic/qwiic.h
index 160fb28dfd..8c3d1c8d63 100644
--- a/drivers/qwiic/qwiic.h
+++ b/drivers/qwiic/qwiic.h
@@ -18,10 +18,10 @@
 #include "i2c_master.h"
 
 #ifdef QWIIC_JOYSTIIC_ENABLE
-  #include "joystiic.h"
+#    include "joystiic.h"
 #endif
 #ifdef QWIIC_MICRO_OLED_ENABLE
-  #include "micro_oled.h"
+#    include "micro_oled.h"
 #endif
 
 void qwiic_init(void);
diff --git a/drivers/qwiic/util/font5x7.h b/drivers/qwiic/util/font5x7.h
index 0bad206b7c..a641945aae 100644
--- a/drivers/qwiic/util/font5x7.h
+++ b/drivers/qwiic/util/font5x7.h
@@ -29,260 +29,11 @@ https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/
 // Standard ASCII 5x7 font
 static const unsigned char font5x7[] PROGMEM = {
     // first row defines - FONTWIDTH, FONTHEIGHT, ASCII START CHAR, TOTAL CHARACTERS, FONT MAP WIDTH HIGH, FONT MAP WIDTH LOW (2,56 meaning 256)
-    5,8,0,255,12,75,
-    0x00, 0x00, 0x00, 0x00, 0x00,
-    0x3E, 0x5B, 0x4F, 0x5B, 0x3E,
-    0x3E, 0x6B, 0x4F, 0x6B, 0x3E,
-    0x1C, 0x3E, 0x7C, 0x3E, 0x1C,
-    0x18, 0x3C, 0x7E, 0x3C, 0x18,
-    0x1C, 0x57, 0x7D, 0x57, 0x1C,
-    0x1C, 0x5E, 0x7F, 0x5E, 0x1C,
-    0x00, 0x18, 0x3C, 0x18, 0x00,
-    0xFF, 0xE7, 0xC3, 0xE7, 0xFF,
-    0x00, 0x18, 0x24, 0x18, 0x00,
-    0xFF, 0xE7, 0xDB, 0xE7, 0xFF,
-    0x30, 0x48, 0x3A, 0x06, 0x0E,
-    0x26, 0x29, 0x79, 0x29, 0x26,
-    0x40, 0x7F, 0x05, 0x05, 0x07,
-    0x40, 0x7F, 0x05, 0x25, 0x3F,
-    0x5A, 0x3C, 0xE7, 0x3C, 0x5A,
-    0x7F, 0x3E, 0x1C, 0x1C, 0x08,
-    0x08, 0x1C, 0x1C, 0x3E, 0x7F,
-    0x14, 0x22, 0x7F, 0x22, 0x14,
-    0x5F, 0x5F, 0x00, 0x5F, 0x5F,
-    0x06, 0x09, 0x7F, 0x01, 0x7F,
-    0x00, 0x66, 0x89, 0x95, 0x6A,
-    0x60, 0x60, 0x60, 0x60, 0x60,
-    0x94, 0xA2, 0xFF, 0xA2, 0x94,
-    0x08, 0x04, 0x7E, 0x04, 0x08,
-    0x10, 0x20, 0x7E, 0x20, 0x10,
-    0x08, 0x08, 0x2A, 0x1C, 0x08,
-    0x08, 0x1C, 0x2A, 0x08, 0x08,
-    0x1E, 0x10, 0x10, 0x10, 0x10,
-    0x0C, 0x1E, 0x0C, 0x1E, 0x0C,
-    0x30, 0x38, 0x3E, 0x38, 0x30,
-    0x06, 0x0E, 0x3E, 0x0E, 0x06,
-    0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x5F, 0x00, 0x00,
-    0x00, 0x07, 0x00, 0x07, 0x00,
-    0x14, 0x7F, 0x14, 0x7F, 0x14,
-    0x24, 0x2A, 0x7F, 0x2A, 0x12,
-    0x23, 0x13, 0x08, 0x64, 0x62,
-    0x36, 0x49, 0x56, 0x20, 0x50,
-    0x00, 0x08, 0x07, 0x03, 0x00,
-    0x00, 0x1C, 0x22, 0x41, 0x00,
-    0x00, 0x41, 0x22, 0x1C, 0x00,
-    0x2A, 0x1C, 0x7F, 0x1C, 0x2A,
-    0x08, 0x08, 0x3E, 0x08, 0x08,
-    0x00, 0x80, 0x70, 0x30, 0x00,
-    0x08, 0x08, 0x08, 0x08, 0x08,
-    0x00, 0x00, 0x60, 0x60, 0x00,
-    0x20, 0x10, 0x08, 0x04, 0x02,
-    0x3E, 0x51, 0x49, 0x45, 0x3E,
-    0x00, 0x42, 0x7F, 0x40, 0x00,
-    0x72, 0x49, 0x49, 0x49, 0x46,
-    0x21, 0x41, 0x49, 0x4D, 0x33,
-    0x18, 0x14, 0x12, 0x7F, 0x10,
-    0x27, 0x45, 0x45, 0x45, 0x39,
-    0x3C, 0x4A, 0x49, 0x49, 0x31,
-    0x41, 0x21, 0x11, 0x09, 0x07,
-    0x36, 0x49, 0x49, 0x49, 0x36,
-    0x46, 0x49, 0x49, 0x29, 0x1E,
-    0x00, 0x00, 0x14, 0x00, 0x00,
-    0x00, 0x40, 0x34, 0x00, 0x00,
-    0x00, 0x08, 0x14, 0x22, 0x41,
-    0x14, 0x14, 0x14, 0x14, 0x14,
-    0x00, 0x41, 0x22, 0x14, 0x08,
-    0x02, 0x01, 0x59, 0x09, 0x06,
-    0x3E, 0x41, 0x5D, 0x59, 0x4E,
-    0x7C, 0x12, 0x11, 0x12, 0x7C,
-    0x7F, 0x49, 0x49, 0x49, 0x36,
-    0x3E, 0x41, 0x41, 0x41, 0x22,
-    0x7F, 0x41, 0x41, 0x41, 0x3E,
-    0x7F, 0x49, 0x49, 0x49, 0x41,
-    0x7F, 0x09, 0x09, 0x09, 0x01,
-    0x3E, 0x41, 0x41, 0x51, 0x73,
-    0x7F, 0x08, 0x08, 0x08, 0x7F,
-    0x00, 0x41, 0x7F, 0x41, 0x00,
-    0x20, 0x40, 0x41, 0x3F, 0x01,
-    0x7F, 0x08, 0x14, 0x22, 0x41,
-    0x7F, 0x40, 0x40, 0x40, 0x40,
-    0x7F, 0x02, 0x1C, 0x02, 0x7F,
-    0x7F, 0x04, 0x08, 0x10, 0x7F,
-    0x3E, 0x41, 0x41, 0x41, 0x3E,
-    0x7F, 0x09, 0x09, 0x09, 0x06,
-    0x3E, 0x41, 0x51, 0x21, 0x5E,
-    0x7F, 0x09, 0x19, 0x29, 0x46,
-    0x26, 0x49, 0x49, 0x49, 0x32,
-    0x03, 0x01, 0x7F, 0x01, 0x03,
-    0x3F, 0x40, 0x40, 0x40, 0x3F,
-    0x1F, 0x20, 0x40, 0x20, 0x1F,
-    0x3F, 0x40, 0x38, 0x40, 0x3F,
-    0x63, 0x14, 0x08, 0x14, 0x63,
-    0x03, 0x04, 0x78, 0x04, 0x03,
-    0x61, 0x59, 0x49, 0x4D, 0x43,
-    0x00, 0x7F, 0x41, 0x41, 0x41,
-    0x02, 0x04, 0x08, 0x10, 0x20,
-    0x00, 0x41, 0x41, 0x41, 0x7F,
-    0x04, 0x02, 0x01, 0x02, 0x04,
-    0x40, 0x40, 0x40, 0x40, 0x40,
-    0x00, 0x03, 0x07, 0x08, 0x00,
-    0x20, 0x54, 0x54, 0x78, 0x40,
-    0x7F, 0x28, 0x44, 0x44, 0x38,
-    0x38, 0x44, 0x44, 0x44, 0x28,
-    0x38, 0x44, 0x44, 0x28, 0x7F,
-    0x38, 0x54, 0x54, 0x54, 0x18,
-    0x00, 0x08, 0x7E, 0x09, 0x02,
-    0x18, 0xA4, 0xA4, 0x9C, 0x78,
-    0x7F, 0x08, 0x04, 0x04, 0x78,
-    0x00, 0x44, 0x7D, 0x40, 0x00,
-    0x20, 0x40, 0x40, 0x3D, 0x00,
-    0x7F, 0x10, 0x28, 0x44, 0x00,
-    0x00, 0x41, 0x7F, 0x40, 0x00,
-    0x7C, 0x04, 0x78, 0x04, 0x78,
-    0x7C, 0x08, 0x04, 0x04, 0x78,
-    0x38, 0x44, 0x44, 0x44, 0x38,
-    0xFC, 0x18, 0x24, 0x24, 0x18,
-    0x18, 0x24, 0x24, 0x18, 0xFC,
-    0x7C, 0x08, 0x04, 0x04, 0x08,
-    0x48, 0x54, 0x54, 0x54, 0x24,
-    0x04, 0x04, 0x3F, 0x44, 0x24,
-    0x3C, 0x40, 0x40, 0x20, 0x7C,
-    0x1C, 0x20, 0x40, 0x20, 0x1C,
-    0x3C, 0x40, 0x30, 0x40, 0x3C,
-    0x44, 0x28, 0x10, 0x28, 0x44,
-    0x4C, 0x90, 0x90, 0x90, 0x7C,
-    0x44, 0x64, 0x54, 0x4C, 0x44,
-    0x00, 0x08, 0x36, 0x41, 0x00,
-    0x00, 0x00, 0x77, 0x00, 0x00,
-    0x00, 0x41, 0x36, 0x08, 0x00,
-    0x02, 0x01, 0x02, 0x04, 0x02,
-    0x3C, 0x26, 0x23, 0x26, 0x3C,
-    0x1E, 0xA1, 0xA1, 0x61, 0x12,
-    0x3A, 0x40, 0x40, 0x20, 0x7A,
-    0x38, 0x54, 0x54, 0x55, 0x59,
-    0x21, 0x55, 0x55, 0x79, 0x41,
-    0x21, 0x54, 0x54, 0x78, 0x41,
-    0x21, 0x55, 0x54, 0x78, 0x40,
-    0x20, 0x54, 0x55, 0x79, 0x40,
-    0x0C, 0x1E, 0x52, 0x72, 0x12,
-    0x39, 0x55, 0x55, 0x55, 0x59,
-    0x39, 0x54, 0x54, 0x54, 0x59,
-    0x39, 0x55, 0x54, 0x54, 0x58,
-    0x00, 0x00, 0x45, 0x7C, 0x41,
-    0x00, 0x02, 0x45, 0x7D, 0x42,
-    0x00, 0x01, 0x45, 0x7C, 0x40,
-    0xF0, 0x29, 0x24, 0x29, 0xF0,
-    0xF0, 0x28, 0x25, 0x28, 0xF0,
-    0x7C, 0x54, 0x55, 0x45, 0x00,
-    0x20, 0x54, 0x54, 0x7C, 0x54,
-    0x7C, 0x0A, 0x09, 0x7F, 0x49,
-    0x32, 0x49, 0x49, 0x49, 0x32,
-    0x32, 0x48, 0x48, 0x48, 0x32,
-    0x32, 0x4A, 0x48, 0x48, 0x30,
-    0x3A, 0x41, 0x41, 0x21, 0x7A,
-    0x3A, 0x42, 0x40, 0x20, 0x78,
-    0x00, 0x9D, 0xA0, 0xA0, 0x7D,
-    0x39, 0x44, 0x44, 0x44, 0x39,
-    0x3D, 0x40, 0x40, 0x40, 0x3D,
-    0x3C, 0x24, 0xFF, 0x24, 0x24,
-    0x48, 0x7E, 0x49, 0x43, 0x66,
-    0x2B, 0x2F, 0xFC, 0x2F, 0x2B,
-    0xFF, 0x09, 0x29, 0xF6, 0x20,
-    0xC0, 0x88, 0x7E, 0x09, 0x03,
-    0x20, 0x54, 0x54, 0x79, 0x41,
-    0x00, 0x00, 0x44, 0x7D, 0x41,
-    0x30, 0x48, 0x48, 0x4A, 0x32,
-    0x38, 0x40, 0x40, 0x22, 0x7A,
-    0x00, 0x7A, 0x0A, 0x0A, 0x72,
-    0x7D, 0x0D, 0x19, 0x31, 0x7D,
-    0x26, 0x29, 0x29, 0x2F, 0x28,
-    0x26, 0x29, 0x29, 0x29, 0x26,
-    0x30, 0x48, 0x4D, 0x40, 0x20,
-    0x38, 0x08, 0x08, 0x08, 0x08,
-    0x08, 0x08, 0x08, 0x08, 0x38,
-    0x2F, 0x10, 0xC8, 0xAC, 0xBA,
-    0x2F, 0x10, 0x28, 0x34, 0xFA,
-    0x00, 0x00, 0x7B, 0x00, 0x00,
-    0x08, 0x14, 0x2A, 0x14, 0x22,
-    0x22, 0x14, 0x2A, 0x14, 0x08,
-    0xAA, 0x00, 0x55, 0x00, 0xAA,
-    0xAA, 0x55, 0xAA, 0x55, 0xAA,
-    0x00, 0x00, 0x00, 0xFF, 0x00,
-    0x10, 0x10, 0x10, 0xFF, 0x00,
-    0x14, 0x14, 0x14, 0xFF, 0x00,
-    0x10, 0x10, 0xFF, 0x00, 0xFF,
-    0x10, 0x10, 0xF0, 0x10, 0xF0,
-    0x14, 0x14, 0x14, 0xFC, 0x00,
-    0x14, 0x14, 0xF7, 0x00, 0xFF,
-    0x00, 0x00, 0xFF, 0x00, 0xFF,
-    0x14, 0x14, 0xF4, 0x04, 0xFC,
-    0x14, 0x14, 0x17, 0x10, 0x1F,
-    0x10, 0x10, 0x1F, 0x10, 0x1F,
-    0x14, 0x14, 0x14, 0x1F, 0x00,
-    0x10, 0x10, 0x10, 0xF0, 0x00,
-    0x00, 0x00, 0x00, 0x1F, 0x10,
-    0x10, 0x10, 0x10, 0x1F, 0x10,
-    0x10, 0x10, 0x10, 0xF0, 0x10,
-    0x00, 0x00, 0x00, 0xFF, 0x10,
-    0x10, 0x10, 0x10, 0x10, 0x10,
-    0x10, 0x10, 0x10, 0xFF, 0x10,
-    0x00, 0x00, 0x00, 0xFF, 0x14,
-    0x00, 0x00, 0xFF, 0x00, 0xFF,
-    0x00, 0x00, 0x1F, 0x10, 0x17,
-    0x00, 0x00, 0xFC, 0x04, 0xF4,
-    0x14, 0x14, 0x17, 0x10, 0x17,
-    0x14, 0x14, 0xF4, 0x04, 0xF4,
-    0x00, 0x00, 0xFF, 0x00, 0xF7,
-    0x14, 0x14, 0x14, 0x14, 0x14,
-    0x14, 0x14, 0xF7, 0x00, 0xF7,
-    0x14, 0x14, 0x14, 0x17, 0x14,
-    0x10, 0x10, 0x1F, 0x10, 0x1F,
-    0x14, 0x14, 0x14, 0xF4, 0x14,
-    0x10, 0x10, 0xF0, 0x10, 0xF0,
-    0x00, 0x00, 0x1F, 0x10, 0x1F,
-    0x00, 0x00, 0x00, 0x1F, 0x14,
-    0x00, 0x00, 0x00, 0xFC, 0x14,
-    0x00, 0x00, 0xF0, 0x10, 0xF0,
-    0x10, 0x10, 0xFF, 0x10, 0xFF,
-    0x14, 0x14, 0x14, 0xFF, 0x14,
-    0x10, 0x10, 0x10, 0x1F, 0x00,
-    0x00, 0x00, 0x00, 0xF0, 0x10,
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
-    0xFF, 0xFF, 0xFF, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0xFF, 0xFF,
-    0x0F, 0x0F, 0x0F, 0x0F, 0x0F,
-    0x38, 0x44, 0x44, 0x38, 0x44,
-    0x7C, 0x2A, 0x2A, 0x3E, 0x14,
-    0x7E, 0x02, 0x02, 0x06, 0x06,
-    0x02, 0x7E, 0x02, 0x7E, 0x02,
-    0x63, 0x55, 0x49, 0x41, 0x63,
-    0x38, 0x44, 0x44, 0x3C, 0x04,
-    0x40, 0x7E, 0x20, 0x1E, 0x20,
-    0x06, 0x02, 0x7E, 0x02, 0x02,
-    0x99, 0xA5, 0xE7, 0xA5, 0x99,
-    0x1C, 0x2A, 0x49, 0x2A, 0x1C,
-    0x4C, 0x72, 0x01, 0x72, 0x4C,
-    0x30, 0x4A, 0x4D, 0x4D, 0x30,
-    0x30, 0x48, 0x78, 0x48, 0x30,
-    0xBC, 0x62, 0x5A, 0x46, 0x3D,
-    0x3E, 0x49, 0x49, 0x49, 0x00,
-    0x7E, 0x01, 0x01, 0x01, 0x7E,
-    0x2A, 0x2A, 0x2A, 0x2A, 0x2A,
-    0x44, 0x44, 0x5F, 0x44, 0x44,
-    0x40, 0x51, 0x4A, 0x44, 0x40,
-    0x40, 0x44, 0x4A, 0x51, 0x40,
-    0x00, 0x00, 0xFF, 0x01, 0x03,
-    0xE0, 0x80, 0xFF, 0x00, 0x00,
-    0x08, 0x08, 0x6B, 0x6B, 0x08,
-    0x36, 0x12, 0x36, 0x24, 0x36,
-    0x06, 0x0F, 0x09, 0x0F, 0x06,
-    0x00, 0x00, 0x18, 0x18, 0x00,
-    0x00, 0x00, 0x10, 0x10, 0x00,
-    0x30, 0x40, 0xFF, 0x01, 0x01,
-    0x00, 0x1F, 0x01, 0x01, 0x1E,
-    0x00, 0x19, 0x1D, 0x17, 0x12,
-    0x00, 0x3C, 0x3C, 0x3C, 0x3C,
-    0x00, 0x00, 0x00, 0x00, 0x00
-};
+    5,    8,    0,    255,  12,   75,   0x00, 0x00, 0x00, 0x00, 0x00, 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, 0x18, 0x3C, 0x18, 0x00, 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, 0x18, 0x24, 0x18, 0x00, 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x26, 0x29, 0x79, 0x29, 0x26, 0x40, 0x7F, 0x05, 0x05, 0x07, 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x14, 0x22, 0x7F, 0x22, 0x14, 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, 0x66, 0x89, 0x95, 0x6A, 0x60, 0x60, 0x60, 0x60, 0x60, 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x08, 0x04, 0x7E, 0x04, 0x08, 0x10, 0x20, 0x7E, 0x20, 0x10, 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x1E, 0x10, 0x10, 0x10, 0x10, 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x30, 0x38, 0x3E, 0x38, 0x30,
+    0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, 0x07, 0x00, 0x07, 0x00, 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x23, 0x13, 0x08, 0x64, 0x62, 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, 0x41, 0x22, 0x1C, 0x00, 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, 0x80, 0x70, 0x30, 0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00, 0x60, 0x60, 0x00, 0x20, 0x10, 0x08, 0x04, 0x02, 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, 0x42, 0x7F, 0x40, 0x00, 0x72, 0x49, 0x49, 0x49, 0x46, 0x21, 0x41, 0x49, 0x4D, 0x33, 0x18, 0x14, 0x12, 0x7F, 0x10, 0x27, 0x45, 0x45, 0x45, 0x39, 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x41, 0x21, 0x11, 0x09, 0x07, 0x36, 0x49, 0x49, 0x49, 0x36, 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, 0x08, 0x14, 0x22, 0x41, 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, 0x41, 0x22, 0x14, 0x08, 0x02,
+    0x01, 0x59, 0x09, 0x06, 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x7F, 0x49, 0x49, 0x49, 0x36, 0x3E, 0x41, 0x41, 0x41, 0x22, 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x7F, 0x49, 0x49, 0x49, 0x41, 0x7F, 0x09, 0x09, 0x09, 0x01, 0x3E, 0x41, 0x41, 0x51, 0x73, 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, 0x41, 0x7F, 0x41, 0x00, 0x20, 0x40, 0x41, 0x3F, 0x01, 0x7F, 0x08, 0x14, 0x22, 0x41, 0x7F, 0x40, 0x40, 0x40, 0x40, 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x7F, 0x09, 0x09, 0x09, 0x06, 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x7F, 0x09, 0x19, 0x29, 0x46, 0x26, 0x49, 0x49, 0x49, 0x32, 0x03, 0x01, 0x7F, 0x01, 0x03, 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x63, 0x14, 0x08, 0x14, 0x63, 0x03, 0x04, 0x78, 0x04, 0x03, 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, 0x7F, 0x41, 0x41, 0x41, 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, 0x41, 0x41, 0x41, 0x7F, 0x04, 0x02, 0x01, 0x02, 0x04, 0x40, 0x40,
+    0x40, 0x40, 0x40, 0x00, 0x03, 0x07, 0x08, 0x00, 0x20, 0x54, 0x54, 0x78, 0x40, 0x7F, 0x28, 0x44, 0x44, 0x38, 0x38, 0x44, 0x44, 0x44, 0x28, 0x38, 0x44, 0x44, 0x28, 0x7F, 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, 0x08, 0x7E, 0x09, 0x02, 0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, 0x44, 0x7D, 0x40, 0x00, 0x20, 0x40, 0x40, 0x3D, 0x00, 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, 0x41, 0x7F, 0x40, 0x00, 0x7C, 0x04, 0x78, 0x04, 0x78, 0x7C, 0x08, 0x04, 0x04, 0x78, 0x38, 0x44, 0x44, 0x44, 0x38, 0xFC, 0x18, 0x24, 0x24, 0x18, 0x18, 0x24, 0x24, 0x18, 0xFC, 0x7C, 0x08, 0x04, 0x04, 0x08, 0x48, 0x54, 0x54, 0x54, 0x24, 0x04, 0x04, 0x3F, 0x44, 0x24, 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x44, 0x28, 0x10, 0x28, 0x44, 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, 0x41, 0x36, 0x08, 0x00, 0x02, 0x01, 0x02, 0x04, 0x02, 0x3C, 0x26, 0x23,
+    0x26, 0x3C, 0x1E, 0xA1, 0xA1, 0x61, 0x12, 0x3A, 0x40, 0x40, 0x20, 0x7A, 0x38, 0x54, 0x54, 0x55, 0x59, 0x21, 0x55, 0x55, 0x79, 0x41, 0x21, 0x54, 0x54, 0x78, 0x41, 0x21, 0x55, 0x54, 0x78, 0x40, 0x20, 0x54, 0x55, 0x79, 0x40, 0x0C, 0x1E, 0x52, 0x72, 0x12, 0x39, 0x55, 0x55, 0x55, 0x59, 0x39, 0x54, 0x54, 0x54, 0x59, 0x39, 0x55, 0x54, 0x54, 0x58, 0x00, 0x00, 0x45, 0x7C, 0x41, 0x00, 0x02, 0x45, 0x7D, 0x42, 0x00, 0x01, 0x45, 0x7C, 0x40, 0xF0, 0x29, 0x24, 0x29, 0xF0, 0xF0, 0x28, 0x25, 0x28, 0xF0, 0x7C, 0x54, 0x55, 0x45, 0x00, 0x20, 0x54, 0x54, 0x7C, 0x54, 0x7C, 0x0A, 0x09, 0x7F, 0x49, 0x32, 0x49, 0x49, 0x49, 0x32, 0x32, 0x48, 0x48, 0x48, 0x32, 0x32, 0x4A, 0x48, 0x48, 0x30, 0x3A, 0x41, 0x41, 0x21, 0x7A, 0x3A, 0x42, 0x40, 0x20, 0x78, 0x00, 0x9D, 0xA0, 0xA0, 0x7D, 0x39, 0x44, 0x44, 0x44, 0x39, 0x3D, 0x40, 0x40, 0x40, 0x3D, 0x3C, 0x24, 0xFF, 0x24, 0x24, 0x48, 0x7E, 0x49, 0x43, 0x66, 0x2B, 0x2F, 0xFC, 0x2F, 0x2B, 0xFF, 0x09, 0x29, 0xF6, 0x20, 0xC0, 0x88, 0x7E, 0x09,
+    0x03, 0x20, 0x54, 0x54, 0x79, 0x41, 0x00, 0x00, 0x44, 0x7D, 0x41, 0x30, 0x48, 0x48, 0x4A, 0x32, 0x38, 0x40, 0x40, 0x22, 0x7A, 0x00, 0x7A, 0x0A, 0x0A, 0x72, 0x7D, 0x0D, 0x19, 0x31, 0x7D, 0x26, 0x29, 0x29, 0x2F, 0x28, 0x26, 0x29, 0x29, 0x29, 0x26, 0x30, 0x48, 0x4D, 0x40, 0x20, 0x38, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x38, 0x2F, 0x10, 0xC8, 0xAC, 0xBA, 0x2F, 0x10, 0x28, 0x34, 0xFA, 0x00, 0x00, 0x7B, 0x00, 0x00, 0x08, 0x14, 0x2A, 0x14, 0x22, 0x22, 0x14, 0x2A, 0x14, 0x08, 0xAA, 0x00, 0x55, 0x00, 0xAA, 0xAA, 0x55, 0xAA, 0x55, 0xAA, 0x00, 0x00, 0x00, 0xFF, 0x00, 0x10, 0x10, 0x10, 0xFF, 0x00, 0x14, 0x14, 0x14, 0xFF, 0x00, 0x10, 0x10, 0xFF, 0x00, 0xFF, 0x10, 0x10, 0xF0, 0x10, 0xF0, 0x14, 0x14, 0x14, 0xFC, 0x00, 0x14, 0x14, 0xF7, 0x00, 0xFF, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0x14, 0x14, 0xF4, 0x04, 0xFC, 0x14, 0x14, 0x17, 0x10, 0x1F, 0x10, 0x10, 0x1F, 0x10, 0x1F, 0x14, 0x14, 0x14, 0x1F, 0x00, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10,
+    0x10, 0x10, 0x10, 0x1F, 0x10, 0x10, 0x10, 0x10, 0xF0, 0x10, 0x00, 0x00, 0x00, 0xFF, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0xFF, 0x10, 0x00, 0x00, 0x00, 0xFF, 0x14, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0x00, 0x1F, 0x10, 0x17, 0x00, 0x00, 0xFC, 0x04, 0xF4, 0x14, 0x14, 0x17, 0x10, 0x17, 0x14, 0x14, 0xF4, 0x04, 0xF4, 0x00, 0x00, 0xFF, 0x00, 0xF7, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0xF7, 0x00, 0xF7, 0x14, 0x14, 0x14, 0x17, 0x14, 0x10, 0x10, 0x1F, 0x10, 0x1F, 0x14, 0x14, 0x14, 0xF4, 0x14, 0x10, 0x10, 0xF0, 0x10, 0xF0, 0x00, 0x00, 0x1F, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x1F, 0x14, 0x00, 0x00, 0x00, 0xFC, 0x14, 0x00, 0x00, 0xF0, 0x10, 0xF0, 0x10, 0x10, 0xFF, 0x10, 0xFF, 0x14, 0x14, 0x14, 0xFF, 0x14, 0x10, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x10, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x38, 0x44, 0x44, 0x38, 0x44, 0x7C,
+    0x2A, 0x2A, 0x3E, 0x14, 0x7E, 0x02, 0x02, 0x06, 0x06, 0x02, 0x7E, 0x02, 0x7E, 0x02, 0x63, 0x55, 0x49, 0x41, 0x63, 0x38, 0x44, 0x44, 0x3C, 0x04, 0x40, 0x7E, 0x20, 0x1E, 0x20, 0x06, 0x02, 0x7E, 0x02, 0x02, 0x99, 0xA5, 0xE7, 0xA5, 0x99, 0x1C, 0x2A, 0x49, 0x2A, 0x1C, 0x4C, 0x72, 0x01, 0x72, 0x4C, 0x30, 0x4A, 0x4D, 0x4D, 0x30, 0x30, 0x48, 0x78, 0x48, 0x30, 0xBC, 0x62, 0x5A, 0x46, 0x3D, 0x3E, 0x49, 0x49, 0x49, 0x00, 0x7E, 0x01, 0x01, 0x01, 0x7E, 0x2A, 0x2A, 0x2A, 0x2A, 0x2A, 0x44, 0x44, 0x5F, 0x44, 0x44, 0x40, 0x51, 0x4A, 0x44, 0x40, 0x40, 0x44, 0x4A, 0x51, 0x40, 0x00, 0x00, 0xFF, 0x01, 0x03, 0xE0, 0x80, 0xFF, 0x00, 0x00, 0x08, 0x08, 0x6B, 0x6B, 0x08, 0x36, 0x12, 0x36, 0x24, 0x36, 0x06, 0x0F, 0x09, 0x0F, 0x06, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x10, 0x10, 0x00, 0x30, 0x40, 0xFF, 0x01, 0x01, 0x00, 0x1F, 0x01, 0x01, 0x1E, 0x00, 0x19, 0x1D, 0x17, 0x12, 0x00, 0x3C, 0x3C, 0x3C, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00};
diff --git a/drivers/qwiic/util/font8x16.h b/drivers/qwiic/util/font8x16.h
index c070e4ec8c..4d3c237866 100644
--- a/drivers/qwiic/util/font8x16.h
+++ b/drivers/qwiic/util/font8x16.h
@@ -27,101 +27,13 @@ https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/
 
 static const unsigned char font8x16[] PROGMEM = {
     // first row defines - FONTWIDTH, FONTHEIGHT, ASCII START CHAR, TOTAL CHARACTERS, FONT MAP WIDTH HIGH, FONT MAP WIDTH LOW (2,56 meaning 256)
-    8,16,32,96,2,56,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x0E, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x00, 0xD0, 0xBE, 0x90, 0xD0, 0xBE, 0x90, 0x00,
-    0x00, 0x1C, 0x62, 0xFF, 0xC2, 0x80, 0x00, 0x00, 0x0C, 0x12, 0x92, 0x4C, 0xB0, 0x88, 0x06, 0x00,
-    0x80, 0x7C, 0x62, 0xB2, 0x1C, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x0E, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0xE0, 0x18, 0x04, 0x02, 0x02, 0x00, 0x00, 0x00, 0x02, 0x02, 0x04, 0x18, 0xE0, 0x00, 0x00,
-    0x00, 0x24, 0x18, 0x7E, 0x18, 0x24, 0x00, 0x00, 0x80, 0x80, 0x80, 0xF0, 0x80, 0x80, 0x80, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x60, 0x18, 0x06, 0x00, 0x00,
-    0xF8, 0x04, 0xC2, 0x32, 0x0C, 0xF8, 0x00, 0x00, 0x00, 0x04, 0x04, 0xFE, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x02, 0x82, 0x42, 0x22, 0x1C, 0x00, 0x00, 0x00, 0x02, 0x22, 0x22, 0x22, 0xDC, 0x00, 0x00,
-    0xC0, 0xA0, 0x98, 0x84, 0xFE, 0x80, 0x80, 0x00, 0x00, 0x1E, 0x12, 0x12, 0x22, 0xC2, 0x00, 0x00,
-    0xF8, 0x44, 0x22, 0x22, 0x22, 0xC0, 0x00, 0x00, 0x00, 0x02, 0x02, 0xC2, 0x32, 0x0A, 0x06, 0x00,
-    0x00, 0x8C, 0x52, 0x22, 0x52, 0x8C, 0x00, 0x00, 0x3C, 0x42, 0x42, 0x42, 0x26, 0xF8, 0x00, 0x00,
-    0x00, 0x00, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00,
-    0x80, 0x80, 0x40, 0x40, 0x20, 0x20, 0x10, 0x00, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, 0x00,
-    0x10, 0x20, 0x20, 0x40, 0x40, 0x80, 0x80, 0x00, 0x00, 0x02, 0x82, 0x42, 0x22, 0x1C, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00,
-    0x00, 0x04, 0x04, 0x0F, 0x04, 0x03, 0x00, 0x00, 0x04, 0x02, 0x01, 0x03, 0x04, 0x04, 0x03, 0x00,
-    0x03, 0x04, 0x04, 0x04, 0x05, 0x03, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x03, 0x06, 0x08, 0x10, 0x10, 0x00, 0x00, 0x00, 0x10, 0x10, 0x08, 0x06, 0x03, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x16, 0x0E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x01, 0x03, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x04, 0x04, 0x07, 0x04, 0x04, 0x00, 0x00,
-    0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
-    0x01, 0x02, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x03, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00,
-    0x00, 0x00, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x16, 0x0E, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x01, 0x01, 0x02, 0x02, 0x04, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00,
-    0x04, 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0xF8, 0x04, 0x72, 0x8A, 0xFA, 0x84, 0x78, 0x00, 0x00, 0xC0, 0x38, 0x06, 0x38, 0xC0, 0x00, 0x00,
-    0x00, 0xFE, 0x22, 0x22, 0x22, 0xDC, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00,
-    0xFE, 0x02, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00, 0x00, 0xFE, 0x22, 0x22, 0x22, 0x22, 0x00, 0x00,
-    0x00, 0xFE, 0x22, 0x22, 0x22, 0x22, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x22, 0xE2, 0x00, 0x00,
-    0xFE, 0x20, 0x20, 0x20, 0x20, 0xFE, 0x00, 0x00, 0x00, 0x02, 0x02, 0xFE, 0x02, 0x02, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x02, 0x02, 0xFE, 0x00, 0x00, 0xFE, 0x40, 0xB0, 0x08, 0x04, 0x02, 0x00, 0x00,
-    0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x0C, 0x70, 0x80, 0x70, 0x0C, 0xFE, 0x00,
-    0xFE, 0x0C, 0x30, 0xC0, 0x00, 0xFE, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00,
-    0xFE, 0x42, 0x42, 0x42, 0x22, 0x1C, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00,
-    0x00, 0xFE, 0x42, 0x42, 0xA2, 0x1C, 0x00, 0x00, 0x00, 0x1C, 0x22, 0x42, 0x42, 0x80, 0x00, 0x00,
-    0x02, 0x02, 0x02, 0xFE, 0x02, 0x02, 0x02, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00,
-    0x06, 0x38, 0xC0, 0x00, 0xC0, 0x38, 0x06, 0x00, 0x3E, 0xC0, 0xF0, 0x0E, 0xF0, 0xC0, 0x3E, 0x00,
-    0x00, 0x06, 0x98, 0x60, 0x98, 0x06, 0x00, 0x00, 0x00, 0x06, 0x18, 0xE0, 0x18, 0x06, 0x00, 0x00,
-    0x02, 0x02, 0xC2, 0x32, 0x0A, 0x06, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x02, 0x02, 0x02, 0x02, 0x00,
-    0x00, 0x06, 0x18, 0x60, 0x80, 0x00, 0x00, 0x00, 0x02, 0x02, 0x02, 0x02, 0xFE, 0x00, 0x00, 0x00,
-    0x40, 0x30, 0x0C, 0x0C, 0x30, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x01, 0x02, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x06, 0x01, 0x01, 0x01, 0x01, 0x01, 0x06, 0x00,
-    0x00, 0x07, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00,
-    0x07, 0x04, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00,
-    0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x04, 0x07, 0x00, 0x00,
-    0x07, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x04, 0x04, 0x07, 0x04, 0x04, 0x00, 0x00,
-    0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x07, 0x00, 0x00, 0x01, 0x02, 0x04, 0x00, 0x00,
-    0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x07, 0x00, 0x00, 0x01, 0x00, 0x00, 0x07, 0x00,
-    0x07, 0x00, 0x00, 0x00, 0x03, 0x07, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00,
-    0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x0C, 0x12, 0x11, 0x10, 0x00,
-    0x00, 0x07, 0x00, 0x00, 0x01, 0x06, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
-    0x00, 0x00, 0x01, 0x06, 0x01, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00,
-    0x00, 0x06, 0x01, 0x00, 0x01, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
-    0x06, 0x05, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x10, 0x10, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x00, 0x10, 0x10, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00,
-    0x00, 0x00, 0x02, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00,
-    0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0x10, 0x00, 0x00,
-    0x00, 0xE0, 0x10, 0x10, 0x10, 0xFE, 0x00, 0x00, 0x00, 0xE0, 0x90, 0x90, 0x90, 0xE0, 0x00, 0x00,
-    0x00, 0x20, 0xFC, 0x22, 0x22, 0x22, 0x02, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00,
-    0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x10, 0x10, 0xF2, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x10, 0x10, 0x10, 0xF2, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x80, 0x40, 0x20, 0x10, 0x00, 0x00,
-    0x00, 0x02, 0x02, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x20, 0x10, 0xF0, 0x20, 0x10, 0xF0, 0x00,
-    0x00, 0xF0, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xE0, 0x00, 0x00,
-    0x00, 0xF0, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00,
-    0x00, 0xF0, 0x20, 0x10, 0x10, 0x70, 0x00, 0x00, 0x00, 0x60, 0x90, 0x90, 0x90, 0x20, 0x00, 0x00,
-    0x00, 0x20, 0x20, 0xFC, 0x20, 0x20, 0x20, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00,
-    0x00, 0x70, 0x80, 0x00, 0x80, 0x70, 0x00, 0x00, 0xF0, 0x00, 0xC0, 0x30, 0xC0, 0x00, 0xF0, 0x00,
-    0x00, 0x30, 0xC0, 0xC0, 0x30, 0x00, 0x00, 0x00, 0x00, 0x30, 0xC0, 0x00, 0x80, 0x70, 0x00, 0x00,
-    0x00, 0x10, 0x10, 0x90, 0x50, 0x30, 0x00, 0x00, 0x00, 0x80, 0x80, 0x7E, 0x02, 0x02, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x02, 0x7E, 0x80, 0x80, 0x00, 0x00,
-    0x00, 0x80, 0x80, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00,
-    0x00, 0x07, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00,
-    0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00,
-    0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x24, 0x24, 0x22, 0x1F, 0x00, 0x00,
-    0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x00, 0x00, 0x00,
-    0x20, 0x20, 0x20, 0x20, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x01, 0x02, 0x04, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00,
-    0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
-    0x00, 0x3F, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x3F, 0x00, 0x00,
-    0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00,
-    0x00, 0x00, 0x03, 0x04, 0x03, 0x00, 0x00, 0x00, 0x01, 0x06, 0x01, 0x00, 0x01, 0x06, 0x01, 0x00,
-    0x00, 0x06, 0x01, 0x01, 0x06, 0x00, 0x00, 0x00, 0x20, 0x20, 0x31, 0x0E, 0x03, 0x00, 0x00, 0x00,
-    0x00, 0x06, 0x05, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x00,
-    0x01, 0x00, 0x00, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-};
+    8,    16,   32,   96,   2,    56,   0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x00, 0xD0, 0xBE, 0x90, 0xD0, 0xBE, 0x90, 0x00, 0x00, 0x1C, 0x62, 0xFF, 0xC2, 0x80, 0x00, 0x00, 0x0C, 0x12, 0x92, 0x4C, 0xB0, 0x88, 0x06, 0x00, 0x80, 0x7C, 0x62, 0xB2, 0x1C, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x0E, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x18, 0x04, 0x02, 0x02, 0x00, 0x00, 0x00, 0x02, 0x02, 0x04, 0x18, 0xE0, 0x00, 0x00, 0x00, 0x24, 0x18, 0x7E, 0x18, 0x24, 0x00, 0x00, 0x80, 0x80, 0x80, 0xF0, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x60, 0x18, 0x06, 0x00, 0x00, 0xF8, 0x04, 0xC2, 0x32, 0x0C, 0xF8, 0x00, 0x00, 0x00, 0x04, 0x04, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x82, 0x42, 0x22,
+    0x1C, 0x00, 0x00, 0x00, 0x02, 0x22, 0x22, 0x22, 0xDC, 0x00, 0x00, 0xC0, 0xA0, 0x98, 0x84, 0xFE, 0x80, 0x80, 0x00, 0x00, 0x1E, 0x12, 0x12, 0x22, 0xC2, 0x00, 0x00, 0xF8, 0x44, 0x22, 0x22, 0x22, 0xC0, 0x00, 0x00, 0x00, 0x02, 0x02, 0xC2, 0x32, 0x0A, 0x06, 0x00, 0x00, 0x8C, 0x52, 0x22, 0x52, 0x8C, 0x00, 0x00, 0x3C, 0x42, 0x42, 0x42, 0x26, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x40, 0x40, 0x20, 0x20, 0x10, 0x00, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, 0x00, 0x10, 0x20, 0x20, 0x40, 0x40, 0x80, 0x80, 0x00, 0x00, 0x02, 0x82, 0x42, 0x22, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x04, 0x04, 0x0F, 0x04, 0x03, 0x00, 0x00, 0x04, 0x02, 0x01, 0x03, 0x04, 0x04, 0x03, 0x00,
+    0x03, 0x04, 0x04, 0x04, 0x05, 0x03, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x06, 0x08, 0x10, 0x10, 0x00, 0x00, 0x00, 0x10, 0x10, 0x08, 0x06, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x16, 0x0E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x04, 0x04, 0x07, 0x04, 0x04, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x04, 0x04,
+    0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x16, 0x0E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x02, 0x02, 0x04, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x04, 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x04, 0x72, 0x8A, 0xFA, 0x84, 0x78, 0x00, 0x00, 0xC0, 0x38, 0x06, 0x38, 0xC0, 0x00, 0x00, 0x00, 0xFE, 0x22, 0x22, 0x22, 0xDC, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00, 0xFE, 0x02, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00, 0x00, 0xFE, 0x22, 0x22, 0x22, 0x22, 0x00, 0x00, 0x00, 0xFE, 0x22, 0x22, 0x22, 0x22, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x22, 0xE2, 0x00, 0x00, 0xFE, 0x20, 0x20, 0x20, 0x20, 0xFE, 0x00, 0x00, 0x00, 0x02, 0x02, 0xFE, 0x02, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x02, 0xFE, 0x00, 0x00, 0xFE, 0x40, 0xB0, 0x08, 0x04, 0x02, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0xFE, 0x0C, 0x70, 0x80, 0x70, 0x0C, 0xFE, 0x00, 0xFE, 0x0C, 0x30, 0xC0, 0x00, 0xFE, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00, 0xFE, 0x42, 0x42, 0x42, 0x22, 0x1C, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00, 0x00, 0xFE, 0x42, 0x42, 0xA2, 0x1C, 0x00, 0x00, 0x00, 0x1C, 0x22, 0x42, 0x42, 0x80, 0x00, 0x00, 0x02, 0x02, 0x02, 0xFE, 0x02, 0x02, 0x02, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x06, 0x38, 0xC0, 0x00, 0xC0, 0x38, 0x06, 0x00, 0x3E, 0xC0, 0xF0, 0x0E, 0xF0, 0xC0, 0x3E, 0x00, 0x00, 0x06, 0x98, 0x60, 0x98, 0x06, 0x00, 0x00, 0x00, 0x06, 0x18, 0xE0, 0x18, 0x06, 0x00, 0x00, 0x02, 0x02, 0xC2, 0x32, 0x0A, 0x06, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00, 0x06, 0x18, 0x60, 0x80, 0x00, 0x00, 0x00, 0x02, 0x02, 0x02, 0x02, 0xFE, 0x00, 0x00, 0x00, 0x40, 0x30, 0x0C, 0x0C, 0x30, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
+    0x02, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x06, 0x01, 0x01, 0x01, 0x01, 0x01, 0x06, 0x00, 0x00, 0x07, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x07, 0x04, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x04, 0x07, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x04, 0x04, 0x07, 0x04, 0x04, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x07, 0x00, 0x00, 0x01, 0x02, 0x04, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x07, 0x00, 0x00, 0x01, 0x00, 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, 0x00, 0x03, 0x07, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x0C, 0x12, 0x11, 0x10, 0x00, 0x00, 0x07, 0x00, 0x00, 0x01, 0x06, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04,
+    0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x01, 0x06, 0x01, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x06, 0x01, 0x00, 0x01, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x06, 0x05, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x10, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x00, 0x10, 0x10, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00, 0x00, 0x00, 0x02, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00, 0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0x10, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xFE, 0x00, 0x00, 0x00, 0xE0, 0x90, 0x90, 0x90, 0xE0, 0x00, 0x00, 0x00, 0x20, 0xFC, 0x22, 0x22, 0x22, 0x02,
+    0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00, 0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x10, 0x10, 0xF2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x10, 0x10, 0xF2, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x80, 0x40, 0x20, 0x10, 0x00, 0x00, 0x00, 0x02, 0x02, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x20, 0x10, 0xF0, 0x20, 0x10, 0xF0, 0x00, 0x00, 0xF0, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xF0, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0x20, 0x10, 0x10, 0x70, 0x00, 0x00, 0x00, 0x60, 0x90, 0x90, 0x90, 0x20, 0x00, 0x00, 0x00, 0x20, 0x20, 0xFC, 0x20, 0x20, 0x20, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x70, 0x80, 0x00, 0x80, 0x70, 0x00, 0x00, 0xF0, 0x00, 0xC0, 0x30, 0xC0, 0x00, 0xF0, 0x00, 0x00, 0x30, 0xC0, 0xC0, 0x30, 0x00, 0x00, 0x00, 0x00, 0x30, 0xC0, 0x00, 0x80, 0x70, 0x00, 0x00, 0x00, 0x10,
+    0x10, 0x90, 0x50, 0x30, 0x00, 0x00, 0x00, 0x80, 0x80, 0x7E, 0x02, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x02, 0x7E, 0x80, 0x80, 0x00, 0x00, 0x00, 0x80, 0x80, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x24, 0x24, 0x22, 0x1F, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x00, 0x00, 0x00, 0x20, 0x20, 0x20, 0x20, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x01, 0x02, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00,
+    0x00, 0x07, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x3F, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x3F, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x03, 0x00, 0x00, 0x00, 0x01, 0x06, 0x01, 0x00, 0x01, 0x06, 0x01, 0x00, 0x00, 0x06, 0x01, 0x01, 0x06, 0x00, 0x00, 0x00, 0x20, 0x20, 0x31, 0x0E, 0x03, 0x00, 0x00, 0x00, 0x00, 0x06, 0x05, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
diff --git a/drivers/ugfx/gdisp/is31fl3731c/board_is31fl3731c_template.h b/drivers/ugfx/gdisp/is31fl3731c/board_is31fl3731c_template.h
index f248cc25ba..0755ddf6c4 100644
--- a/drivers/ugfx/gdisp/is31fl3731c/board_is31fl3731c_template.h
+++ b/drivers/ugfx/gdisp/is31fl3731c/board_is31fl3731c_template.h
@@ -19,54 +19,53 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define _GDISP_LLD_BOARD_H
 
 static const I2CConfig i2ccfg = {
-  400000 // clock speed (Hz); 400kHz max for IS31
+    400000  // clock speed (Hz); 400kHz max for IS31
 };
 
 static const uint8_t led_mask[] = {
-	0xFF, 0x00, /* C1-1 -> C1-16 */
-	0xFF, 0x00, /* C2-1 -> C2-16 */
-	0xFF, 0x00, /* C3-1 -> C3-16 */
-	0xFF, 0x00, /* C4-1 -> C4-16 */
-	0x3F, 0x00, /* C5-1 -> C5-16 */
-	0x00, 0x00, /* C6-1 -> C6-16 */
-	0x00, 0x00, /* C7-1 -> C7-16 */
-	0x00, 0x00, /* C8-1 -> C8-16 */
-	0x00, 0x00, /* C9-1 -> C9-16 */
+    0xFF, 0x00, /* C1-1 -> C1-16 */
+    0xFF, 0x00, /* C2-1 -> C2-16 */
+    0xFF, 0x00, /* C3-1 -> C3-16 */
+    0xFF, 0x00, /* C4-1 -> C4-16 */
+    0x3F, 0x00, /* C5-1 -> C5-16 */
+    0x00, 0x00, /* C6-1 -> C6-16 */
+    0x00, 0x00, /* C7-1 -> C7-16 */
+    0x00, 0x00, /* C8-1 -> C8-16 */
+    0x00, 0x00, /* C9-1 -> C9-16 */
 };
 
 // The address of the LED
-#define LA(c, r) (c + r * 16 )
+#define LA(c, r) (c + r * 16)
 // Need to be an address that is not mapped, but inside the range of the controller matrix
 #define NA LA(8, 8)
 
 // The numbers in the comments are the led numbers DXX on the PCB
 // The mapping is taken from the schematic of left hand side
 static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = {
-//   45        44        43        42        41        40        39
-   { LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)},
-//   52        51        50        49        48        47        46
-   { LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2) },
-//   58        57        56        55        54        53        N/A
-   { LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA },
-//   67        66        65        64        63        62        61
-   { LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2) },
-//   76        75        74        73        72        60        59
-   { LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0) },
-//   N/A       N/A       N/A       N/A       N/A       N/A       68
-   { NA,       NA,       NA,       NA,       NA,       NA,       LA(5, 4) },
-//   N/A       N/A       N/A       N/A       71        70        69
-   { NA,       NA,       NA,       NA,       LA(6, 2), LA(6, 1), LA(6, 0) },
+    //   45        44        43        42        41        40        39
+    {LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)},
+    //   52        51        50        49        48        47        46
+    {LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2)},
+    //   58        57        56        55        54        53        N/A
+    {LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA},
+    //   67        66        65        64        63        62        61
+    {LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2)},
+    //   76        75        74        73        72        60        59
+    {LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0)},
+    //   N/A       N/A       N/A       N/A       N/A       N/A       68
+    {NA, NA, NA, NA, NA, NA, LA(5, 4)},
+    //   N/A       N/A       N/A       N/A       71        70        69
+    {NA, NA, NA, NA, LA(6, 2), LA(6, 1), LA(6, 0)},
 };
 
-
-#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND
+#define IS31_ADDR_DEFAULT 0x74  // AD connected to GND
 #define IS31_TIMEOUT 5000
 
-static GFXINLINE void init_board(GDisplay *g) {
-    (void) g;
+static GFXINLINE void init_board(GDisplay* g) {
+    (void)g;
     /* I2C pins */
-    palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
-    palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
+    palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2);  // PTB0/I2C0/SCL
+    palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2);  // PTB1/I2C0/SDA
     palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
     palClearPad(GPIOB, 16);
     /* start I2C */
@@ -77,34 +76,30 @@ static GFXINLINE void init_board(GDisplay *g) {
     I2CD1.i2c->FLT = 4;
 }
 
-static GFXINLINE void post_init_board(GDisplay *g) {
-	(void) g;
-}
+static GFXINLINE void post_init_board(GDisplay* g) { (void)g; }
 
 static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) {
-    (void) g;
+    (void)g;
     return led_mask;
 }
 
-static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y)
-{
-    (void) g;
+static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y) {
+    (void)g;
     return led_mapping[y][x];
 }
 
 static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) {
-    (void) g;
-    if(!shutdown) {
+    (void)g;
+    if (!shutdown) {
         palSetPad(GPIOB, 16);
-    }
-    else {
+    } else {
         palClearPad(GPIOB, 16);
     }
 }
 
-static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
-	(void) g;
-	i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
+static GFXINLINE void write_data(GDisplay* g, uint8_t* data, uint16_t length) {
+    (void)g;
+    i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
 }
 
 #endif /* _GDISP_LLD_BOARD_H */
diff --git a/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c b/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c
index 917adadb84..7188244022 100644
--- a/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c
+++ b/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c
@@ -19,15 +19,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #if GFX_USE_GDISP
 
-#define GDISP_DRIVER_VMT          GDISPVMT_IS31FL3731C_QMK
-#define GDISP_SCREEN_HEIGHT       LED_HEIGHT
-#define GDISP_SCREEN_WIDTH        LED_WIDTH
+#    define GDISP_DRIVER_VMT GDISPVMT_IS31FL3731C_QMK
+#    define GDISP_SCREEN_HEIGHT LED_HEIGHT
+#    define GDISP_SCREEN_WIDTH LED_WIDTH
 
-#include "gdisp_lld_config.h"
-#include "src/gdisp/gdisp_driver.h"
-
-#include "board_is31fl3731c.h"
+#    include "gdisp_lld_config.h"
+#    include "src/gdisp/gdisp_driver.h"
 
+#    include "board_is31fl3731c.h"
 
 // Can't include led_tables from here
 extern const uint8_t CIE1931_CURVE[];
@@ -36,96 +35,96 @@ extern const uint8_t CIE1931_CURVE[];
 /* Driver local definitions.                                                 */
 /*===========================================================================*/
 
-#ifndef GDISP_INITIAL_CONTRAST
-    #define GDISP_INITIAL_CONTRAST    0
-#endif
-#ifndef GDISP_INITIAL_BACKLIGHT
-    #define GDISP_INITIAL_BACKLIGHT   0
-#endif
+#    ifndef GDISP_INITIAL_CONTRAST
+#        define GDISP_INITIAL_CONTRAST 0
+#    endif
+#    ifndef GDISP_INITIAL_BACKLIGHT
+#        define GDISP_INITIAL_BACKLIGHT 0
+#    endif
 
-#define GDISP_FLG_NEEDFLUSH           (GDISP_FLG_DRIVER<<0)
+#    define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER << 0)
 
-#define IS31_ADDR_DEFAULT 0x74
+#    define IS31_ADDR_DEFAULT 0x74
 
-#define IS31_REG_CONFIG   0x00
+#    define IS31_REG_CONFIG 0x00
 // bits in reg
-#define IS31_REG_CONFIG_PICTUREMODE   0x00
-#define IS31_REG_CONFIG_AUTOPLAYMODE  0x08
-#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
+#    define IS31_REG_CONFIG_PICTUREMODE 0x00
+#    define IS31_REG_CONFIG_AUTOPLAYMODE 0x08
+#    define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18
 // D2:D0 bits are starting frame for autoplay mode
 
-#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode
+#    define IS31_REG_PICTDISP 0x01  // D2:D0 frame select for picture mode
 
-#define IS31_REG_AUTOPLAYCTRL1 0x02
+#    define IS31_REG_AUTOPLAYCTRL1 0x02
 // D6:D4 number of loops (000=infty)
 // D2:D0 number of frames to be used
 
-#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms)
+#    define IS31_REG_AUTOPLAYCTRL2 0x03  // D5:D0 delay time (*11ms)
 
-#define IS31_REG_DISPLAYOPT 0x05
-#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
-#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8
+#    define IS31_REG_DISPLAYOPT 0x05
+#    define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20  // same intensity for all frames
+#    define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8
 // D2:D0 bits blink period time (*0.27s)
 
-#define IS31_REG_AUDIOSYNC 0x06
-#define IS31_REG_AUDIOSYNC_ENABLE 0x1
+#    define IS31_REG_AUDIOSYNC 0x06
+#    define IS31_REG_AUDIOSYNC_ENABLE 0x1
 
-#define IS31_REG_FRAMESTATE 0x07
+#    define IS31_REG_FRAMESTATE 0x07
 
-#define IS31_REG_BREATHCTRL1 0x08
+#    define IS31_REG_BREATHCTRL1 0x08
 // D6:D4 fade out time (26ms*2^i)
 // D2:D0 fade in time (26ms*2^i)
 
-#define IS31_REG_BREATHCTRL2 0x09
-#define IS31_REG_BREATHCTRL2_ENABLE 0x10
+#    define IS31_REG_BREATHCTRL2 0x09
+#    define IS31_REG_BREATHCTRL2_ENABLE 0x10
 // D2:D0 extinguish time (3.5ms*2^i)
 
-#define IS31_REG_SHUTDOWN 0x0A
-#define IS31_REG_SHUTDOWN_OFF 0x0
-#define IS31_REG_SHUTDOWN_ON 0x1
+#    define IS31_REG_SHUTDOWN 0x0A
+#    define IS31_REG_SHUTDOWN_OFF 0x0
+#    define IS31_REG_SHUTDOWN_ON 0x1
 
-#define IS31_REG_AGCCTRL 0x0B
-#define IS31_REG_ADCRATE 0x0C
+#    define IS31_REG_AGCCTRL 0x0B
+#    define IS31_REG_ADCRATE 0x0C
 
-#define IS31_COMMANDREGISTER 0xFD
-#define IS31_FUNCTIONREG 0x0B    // helpfully called 'page nine'
-#define IS31_FUNCTIONREG_SIZE 0xD
+#    define IS31_COMMANDREGISTER 0xFD
+#    define IS31_FUNCTIONREG 0x0B  // helpfully called 'page nine'
+#    define IS31_FUNCTIONREG_SIZE 0xD
 
-#define IS31_FRAME_SIZE 0xB4
+#    define IS31_FRAME_SIZE 0xB4
 
-#define IS31_PWM_REG 0x24
-#define IS31_PWM_SIZE 0x90
+#    define IS31_PWM_REG 0x24
+#    define IS31_PWM_SIZE 0x90
 
-#define IS31_LED_MASK_SIZE 0x12
+#    define IS31_LED_MASK_SIZE 0x12
 
-#define IS31
+#    define IS31
 
 /*===========================================================================*/
 /* Driver local functions.                                                   */
 /*===========================================================================*/
 
-typedef struct{
+typedef struct {
     uint8_t write_buffer_offset;
     uint8_t write_buffer[IS31_FRAME_SIZE];
     uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH];
     uint8_t page;
-}__attribute__((__packed__)) PrivData;
+} __attribute__((__packed__)) PrivData;
 
 // Some common routines and macros
-#define PRIV(g)                         ((PrivData*)g->priv)
+#    define PRIV(g) ((PrivData *)g->priv)
 
 /*===========================================================================*/
 /* Driver exported functions.                                                */
 /*===========================================================================*/
 
-static GFXINLINE void write_page(GDisplay* g, uint8_t page) {
+static GFXINLINE void write_page(GDisplay *g, uint8_t page) {
     uint8_t tx[2] __attribute__((aligned(2)));
     tx[0] = IS31_COMMANDREGISTER;
     tx[1] = page;
     write_data(g, tx, 2);
 }
 
-static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) {
+static GFXINLINE void write_register(GDisplay *g, uint8_t page, uint8_t reg, uint8_t data) {
     uint8_t tx[2] __attribute__((aligned(2)));
     tx[0] = reg;
     tx[1] = data;
@@ -136,7 +135,7 @@ static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uin
 static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) {
     PRIV(g)->write_buffer_offset = offset;
     write_page(g, page);
-    write_data(g, (uint8_t*)PRIV(g), length + 1);
+    write_data(g, (uint8_t *)PRIV(g), length + 1);
 }
 
 LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
@@ -160,10 +159,9 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
     write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE);
     gfxSleepMilliseconds(10);
 
-
     // zero all LED registers on all 8 pages, and enable the mask
     __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE);
-    for(uint8_t i=0; i<8; i++) {
+    for (uint8_t i = 0; i < 8; i++) {
         write_ram(g, i, 0, IS31_FRAME_SIZE);
         gfxSleepMilliseconds(1);
     }
@@ -176,133 +174,129 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
     post_init_board(g);
 
     /* Initialise the GDISP structure */
-    g->g.Width = GDISP_SCREEN_WIDTH;
-    g->g.Height = GDISP_SCREEN_HEIGHT;
+    g->g.Width       = GDISP_SCREEN_WIDTH;
+    g->g.Height      = GDISP_SCREEN_HEIGHT;
     g->g.Orientation = GDISP_ROTATE_0;
-    g->g.Powermode = powerOff;
-    g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
-    g->g.Contrast = GDISP_INITIAL_CONTRAST;
+    g->g.Powermode   = powerOff;
+    g->g.Backlight   = GDISP_INITIAL_BACKLIGHT;
+    g->g.Contrast    = GDISP_INITIAL_CONTRAST;
     return TRUE;
 }
 
-#if GDISP_HARDWARE_FLUSH
-    LLDSPEC void gdisp_lld_flush(GDisplay *g) {
-        // Don't flush if we don't need it.
-        if (!(g->flags & GDISP_FLG_NEEDFLUSH))
-            return;
-
-        PRIV(g)->page++;
-        PRIV(g)->page %= 2;
-        // TODO: some smarter algorithm for this
-        // We should run only one physical page at a time
-        // This way we don't need to send so much data, and
-        // we could use slightly less memory
-        uint8_t* src = PRIV(g)->frame_buffer;
-        for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) {
-            for (int x=0;x<GDISP_SCREEN_WIDTH;x++) {
-                uint8_t val = (uint16_t)*src * g->g.Backlight / 100;
-                PRIV(g)->write_buffer[get_led_address(g, x, y)]=CIE1931_CURVE[val];
-                ++src;
-            }
+#    if GDISP_HARDWARE_FLUSH
+LLDSPEC void gdisp_lld_flush(GDisplay *g) {
+    // Don't flush if we don't need it.
+    if (!(g->flags & GDISP_FLG_NEEDFLUSH)) return;
+
+    PRIV(g)->page++;
+    PRIV(g)->page %= 2;
+    // TODO: some smarter algorithm for this
+    // We should run only one physical page at a time
+    // This way we don't need to send so much data, and
+    // we could use slightly less memory
+    uint8_t *src = PRIV(g)->frame_buffer;
+    for (int y = 0; y < GDISP_SCREEN_HEIGHT; y++) {
+        for (int x = 0; x < GDISP_SCREEN_WIDTH; x++) {
+            uint8_t val                                     = (uint16_t)*src * g->g.Backlight / 100;
+            PRIV(g)->write_buffer[get_led_address(g, x, y)] = CIE1931_CURVE[val];
+            ++src;
         }
-        write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE);
-        gfxSleepMilliseconds(1);
-        write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page);
-
-        g->flags &= ~GDISP_FLG_NEEDFLUSH;
     }
-#endif
+    write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE);
+    gfxSleepMilliseconds(1);
+    write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page);
 
-#if GDISP_HARDWARE_DRAWPIXEL
-    LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
-        coord_t        x, y;
+    g->flags &= ~GDISP_FLG_NEEDFLUSH;
+}
+#    endif
 
-        switch(g->g.Orientation) {
+#    if GDISP_HARDWARE_DRAWPIXEL
+LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
+    coord_t x, y;
+
+    switch (g->g.Orientation) {
         default:
         case GDISP_ROTATE_0:
             x = g->p.x;
             y = g->p.y;
             break;
         case GDISP_ROTATE_180:
-            x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+            x = GDISP_SCREEN_WIDTH - 1 - g->p.x;
             y = g->p.y;
             break;
-        }
-        PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color);
-        g->flags |= GDISP_FLG_NEEDFLUSH;
     }
-#endif
+    PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color);
+    g->flags |= GDISP_FLG_NEEDFLUSH;
+}
+#    endif
 
-#if GDISP_HARDWARE_PIXELREAD
-    LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
-        coord_t        x, y;
+#    if GDISP_HARDWARE_PIXELREAD
+LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
+    coord_t x, y;
 
-        switch(g->g.Orientation) {
+    switch (g->g.Orientation) {
         default:
         case GDISP_ROTATE_0:
             x = g->p.x;
             y = g->p.y;
             break;
         case GDISP_ROTATE_180:
-            x = GDISP_SCREEN_WIDTH-1 - g->p.x;
+            x = GDISP_SCREEN_WIDTH - 1 - g->p.x;
             y = g->p.y;
             break;
-        }
-        return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]);
     }
-#endif
+    return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]);
+}
+#    endif
 
-#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
-    LLDSPEC void gdisp_lld_control(GDisplay *g) {
-        switch(g->p.x) {
+#    if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
+LLDSPEC void gdisp_lld_control(GDisplay *g) {
+    switch (g->p.x) {
         case GDISP_CONTROL_POWER:
-            if (g->g.Powermode == (powermode_t)g->p.ptr)
-                return;
-            switch((powermode_t)g->p.ptr) {
-            case powerOff:
-            case powerSleep:
-            case powerDeepSleep:
-                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
-                break;
-            case powerOn:
-                write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
-                break;
-            default:
-                return;
+            if (g->g.Powermode == (powermode_t)g->p.ptr) return;
+            switch ((powermode_t)g->p.ptr) {
+                case powerOff:
+                case powerSleep:
+                case powerDeepSleep:
+                    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
+                    break;
+                case powerOn:
+                    write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
+                    break;
+                default:
+                    return;
             }
             g->g.Powermode = (powermode_t)g->p.ptr;
             return;
 
         case GDISP_CONTROL_ORIENTATION:
-            if (g->g.Orientation == (orientation_t)g->p.ptr)
-                return;
-            switch((orientation_t)g->p.ptr) {
-            /* Rotation is handled by the drawing routines */
-            case GDISP_ROTATE_0:
-            case GDISP_ROTATE_180:
-                g->g.Height = GDISP_SCREEN_HEIGHT;
-                g->g.Width = GDISP_SCREEN_WIDTH;
-                break;
-            case GDISP_ROTATE_90:
-            case GDISP_ROTATE_270:
-                g->g.Height = GDISP_SCREEN_WIDTH;
-                g->g.Width = GDISP_SCREEN_HEIGHT;
-                break;
-            default:
-                return;
+            if (g->g.Orientation == (orientation_t)g->p.ptr) return;
+            switch ((orientation_t)g->p.ptr) {
+                /* Rotation is handled by the drawing routines */
+                case GDISP_ROTATE_0:
+                case GDISP_ROTATE_180:
+                    g->g.Height = GDISP_SCREEN_HEIGHT;
+                    g->g.Width  = GDISP_SCREEN_WIDTH;
+                    break;
+                case GDISP_ROTATE_90:
+                case GDISP_ROTATE_270:
+                    g->g.Height = GDISP_SCREEN_WIDTH;
+                    g->g.Width  = GDISP_SCREEN_HEIGHT;
+                    break;
+                default:
+                    return;
             }
             g->g.Orientation = (orientation_t)g->p.ptr;
             return;
 
         case GDISP_CONTROL_BACKLIGHT:
-            if (g->g.Backlight == (unsigned)g->p.ptr)
-                return;
-            unsigned val = (unsigned)g->p.ptr;
+            if (g->g.Backlight == (unsigned)g->p.ptr) return;
+            unsigned val   = (unsigned)g->p.ptr;
             g->g.Backlight = val > 100 ? 100 : val;
             g->flags |= GDISP_FLG_NEEDFLUSH;
             return;
-        }
     }
-#endif // GDISP_NEED_CONTROL
+}
+#    endif  // GDISP_NEED_CONTROL
 
-#endif // GFX_USE_GDISP
+#endif  // GFX_USE_GDISP
diff --git a/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h b/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h
index 588d688cf6..1b9fadba16 100644
--- a/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h
+++ b/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h
@@ -24,13 +24,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Driver hardware support.                                                  */
 /*===========================================================================*/
 
-#define GDISP_HARDWARE_FLUSH            TRUE        // This controller requires flushing
-#define GDISP_HARDWARE_DRAWPIXEL        TRUE
-#define GDISP_HARDWARE_PIXELREAD        TRUE
-#define GDISP_HARDWARE_CONTROL          TRUE
+#    define GDISP_HARDWARE_FLUSH TRUE  // This controller requires flushing
+#    define GDISP_HARDWARE_DRAWPIXEL TRUE
+#    define GDISP_HARDWARE_PIXELREAD TRUE
+#    define GDISP_HARDWARE_CONTROL TRUE
 
-#define GDISP_LLD_PIXELFORMAT           GDISP_PIXELFORMAT_GRAY256
+#    define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_GRAY256
 
-#endif    /* GFX_USE_GDISP */
+#endif /* GFX_USE_GDISP */
 
-#endif    /* _GDISP_LLD_CONFIG_H */
+#endif /* _GDISP_LLD_CONFIG_H */
diff --git a/drivers/ugfx/gdisp/st7565/board_st7565_template.h b/drivers/ugfx/gdisp/st7565/board_st7565_template.h
index 9ab636c95d..194f8ea24d 100644
--- a/drivers/ugfx/gdisp/st7565/board_st7565_template.h
+++ b/drivers/ugfx/gdisp/st7565/board_st7565_template.h
@@ -8,10 +8,10 @@
 #ifndef _GDISP_LLD_BOARD_H
 #define _GDISP_LLD_BOARD_H
 
-#define ST7565_LCD_BIAS         ST7565_LCD_BIAS_9 // actually 6
-#define ST7565_ADC              ST7565_ADC_NORMAL
-#define ST7565_COM_SCAN         ST7565_COM_SCAN_DEC
-#define ST7565_PAGE_ORDER       0,1,2,3
+#define ST7565_LCD_BIAS ST7565_LCD_BIAS_9  // actually 6
+#define ST7565_ADC ST7565_ADC_NORMAL
+#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC
+#define ST7565_PAGE_ORDER 0, 1, 2, 3
 /*
  * Custom page order for several LCD boards, e.g. HEM12864-99
  * #define ST7565_PAGE_ORDER       4,5,6,7,0,1,2,3
@@ -25,11 +25,9 @@
 #define ST7565_SLCK_PIN 5
 #define ST7565_SS_PIN 4
 
-#define palSetPadModeRaw(portname, bits) \
-    ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
+#define palSetPadModeRaw(portname, bits) ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
 
-#define palSetPadModeNamed(portname, portmode) \
-    palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
+#define palSetPadModeNamed(portname, portmode) palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
 
 #define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2)
 // DSPI Clock and Transfer Attributes
@@ -37,38 +35,37 @@
 // MSB First
 // CLK Low by default
 static const SPIConfig spi1config = {
-   // Operation complete callback or @p NULL.
-  .end_cb = NULL,
-   //The chip select line port - when not using pcs.
-  .ssport = ST7565_GPIOPORT,
-   // brief The chip select line pad number - when not using pcs.
-  .sspad=ST7565_SS_PIN,
-   // SPI initialization data.
-  .tar0 =
-    SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes
-    | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns
-    | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns
-    | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
-    | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2
-    | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns
+    // Operation complete callback or @p NULL.
+    .end_cb = NULL,
+    // The chip select line port - when not using pcs.
+    .ssport = ST7565_GPIOPORT,
+    // brief The chip select line pad number - when not using pcs.
+    .sspad = ST7565_SS_PIN,
+    // SPI initialization data.
+    .tar0 = SPIx_CTARn_FMSZ(7)     // Frame size = 8 bytes
+            | SPIx_CTARn_ASC(1)    // After SCK Delay Scaler (min 50 ns) = 55.56ns
+            | SPIx_CTARn_DT(0)     // Delay After Transfer Scaler (no minimum)= 27.78ns
+            | SPIx_CTARn_CSSCK(0)  // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
+            | SPIx_CTARn_PBR(0)    // Baud Rate Prescaler = 2
+            | SPIx_CTARn_BR(0)     // Baud rate (min 50ns) = 55.56ns
 };
 
 static GFXINLINE void acquire_bus(GDisplay *g) {
-    (void) g;
+    (void)g;
     // Only the LCD is using the SPI bus, so no need to acquire
     // spiAcquireBus(&SPID1);
     spiSelect(&SPID1);
 }
 
 static GFXINLINE void release_bus(GDisplay *g) {
-    (void) g;
+    (void)g;
     // Only the LCD is using the SPI bus, so no need to release
-    //spiReleaseBus(&SPID1);
+    // spiReleaseBus(&SPID1);
     spiUnselect(&SPID1);
 }
 
 static GFXINLINE void init_board(GDisplay *g) {
-    (void) g;
+    (void)g;
     palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
     palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
     palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
@@ -82,31 +79,23 @@ static GFXINLINE void init_board(GDisplay *g) {
     release_bus(g);
 }
 
-static GFXINLINE void post_init_board(GDisplay *g) {
-    (void) g;
-}
+static GFXINLINE void post_init_board(GDisplay *g) { (void)g; }
 
 static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
-    (void) g;
+    (void)g;
     if (state) {
         palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN);
-    }
-    else {
+    } else {
         palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
     }
 }
 
-static GFXINLINE void enter_data_mode(GDisplay *g) {
-    palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
-}
-
-static GFXINLINE void enter_cmd_mode(GDisplay *g) {
-    palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN);
-}
+static GFXINLINE void enter_data_mode(GDisplay *g) { palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); }
 
+static GFXINLINE void enter_cmd_mode(GDisplay *g) { palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN); }
 
-static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
-    (void) g;
+static GFXINLINE void write_data(GDisplay *g, uint8_t *data, uint16_t length) {
+    (void)g;
     spiSend(&SPID1, length, data);
 }
 
diff --git a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c b/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
index c38194b069..fde320981b 100644
--- a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
+++ b/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c
@@ -9,82 +9,89 @@
 
 #if GFX_USE_GDISP
 
-#define GDISP_DRIVER_VMT            GDISPVMT_ST7565_QMK
-#include "gdisp_lld_config.h"
-#include "src/gdisp/gdisp_driver.h"
+#    define GDISP_DRIVER_VMT GDISPVMT_ST7565_QMK
+#    include "gdisp_lld_config.h"
+#    include "src/gdisp/gdisp_driver.h"
 
-#include "board_st7565.h"
+#    include "board_st7565.h"
 
 /*===========================================================================*/
 /* Driver local definitions.                                                 */
 /*===========================================================================*/
 
-#ifndef GDISP_SCREEN_HEIGHT
-#define GDISP_SCREEN_HEIGHT         LCD_HEIGHT
-#endif
-#ifndef GDISP_SCREEN_WIDTH
-#define GDISP_SCREEN_WIDTH          LCD_WIDTH
-#endif
-#ifndef GDISP_INITIAL_CONTRAST
-#define GDISP_INITIAL_CONTRAST      35
-#endif
-#ifndef GDISP_INITIAL_BACKLIGHT
-#define GDISP_INITIAL_BACKLIGHT     100
-#endif
+#    ifndef GDISP_SCREEN_HEIGHT
+#        define GDISP_SCREEN_HEIGHT LCD_HEIGHT
+#    endif
+#    ifndef GDISP_SCREEN_WIDTH
+#        define GDISP_SCREEN_WIDTH LCD_WIDTH
+#    endif
+#    ifndef GDISP_INITIAL_CONTRAST
+#        define GDISP_INITIAL_CONTRAST 35
+#    endif
+#    ifndef GDISP_INITIAL_BACKLIGHT
+#        define GDISP_INITIAL_BACKLIGHT 100
+#    endif
 
-#define GDISP_FLG_NEEDFLUSH         (GDISP_FLG_DRIVER<<0)
+#    define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER << 0)
 
-#include "st7565.h"
+#    include "st7565.h"
 
 /*===========================================================================*/
 /* Driver config defaults for backward compatibility.                        */
 /*===========================================================================*/
-#ifndef ST7565_LCD_BIAS
-#define ST7565_LCD_BIAS         ST7565_LCD_BIAS_7
-#endif
-#ifndef ST7565_ADC
-#define ST7565_ADC              ST7565_ADC_NORMAL
-#endif
-#ifndef ST7565_COM_SCAN
-#define ST7565_COM_SCAN         ST7565_COM_SCAN_INC
-#endif
-#ifndef ST7565_PAGE_ORDER
-#define ST7565_PAGE_ORDER       0,1,2,3
-#endif
+#    ifndef ST7565_LCD_BIAS
+#        define ST7565_LCD_BIAS ST7565_LCD_BIAS_7
+#    endif
+#    ifndef ST7565_ADC
+#        define ST7565_ADC ST7565_ADC_NORMAL
+#    endif
+#    ifndef ST7565_COM_SCAN
+#        define ST7565_COM_SCAN ST7565_COM_SCAN_INC
+#    endif
+#    ifndef ST7565_PAGE_ORDER
+#        define ST7565_PAGE_ORDER 0, 1, 2, 3
+#    endif
 
 /*===========================================================================*/
 /* Driver local functions.                                                   */
 /*===========================================================================*/
 
-typedef struct{
-    bool_t buffer2;
+typedef struct {
+    bool_t  buffer2;
     uint8_t data_pos;
     uint8_t data[16];
     uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8];
-}PrivData;
+} PrivData;
 
 // Some common routines and macros
-#define PRIV(g)                         ((PrivData*)g->priv)
-#define RAM(g)                          (PRIV(g)->ram)
+#    define PRIV(g) ((PrivData *)g->priv)
+#    define RAM(g) (PRIV(g)->ram)
 
-static GFXINLINE void write_cmd(GDisplay* g, uint8_t cmd) {
-    PRIV(g)->data[PRIV(g)->data_pos++] = cmd;
-}
+static GFXINLINE void write_cmd(GDisplay *g, uint8_t cmd) { PRIV(g)->data[PRIV(g)->data_pos++] = cmd; }
 
-static GFXINLINE void flush_cmd(GDisplay* g) {
+static GFXINLINE void flush_cmd(GDisplay *g) {
     write_data(g, PRIV(g)->data, PRIV(g)->data_pos);
     PRIV(g)->data_pos = 0;
 }
 
-#define write_cmd2(g, cmd1, cmd2)        { write_cmd(g, cmd1); write_cmd(g, cmd2); }
-#define write_cmd3(g, cmd1, cmd2, cmd3)  { write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); }
+#    define write_cmd2(g, cmd1, cmd2) \
+        {                             \
+            write_cmd(g, cmd1);       \
+            write_cmd(g, cmd2);       \
+        }
+#    define write_cmd3(g, cmd1, cmd2, cmd3) \
+        {                                   \
+            write_cmd(g, cmd1);             \
+            write_cmd(g, cmd2);             \
+            write_cmd(g, cmd3);             \
+        }
 
 // Some common routines and macros
-#define delay(us)           gfxSleepMicroseconds(us)
-#define delay_ms(ms)        gfxSleepMilliseconds(ms)
+#    define delay(us) gfxSleepMicroseconds(us)
+#    define delay_ms(ms) gfxSleepMilliseconds(ms)
 
-#define xyaddr(x, y)        ((x) + ((y)>>3)*GDISP_SCREEN_WIDTH)
-#define xybit(y)            (1<<((y)&7))
+#    define xyaddr(x, y) ((x) + ((y) >> 3) * GDISP_SCREEN_WIDTH)
+#    define xybit(y) (1 << ((y)&7))
 
 /*===========================================================================*/
 /* Driver exported functions.                                                */
@@ -99,8 +106,8 @@ static GFXINLINE void flush_cmd(GDisplay* g) {
 
 LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
     // The private area is the display surface.
-    g->priv = gfxAlloc(sizeof(PrivData));
-    PRIV(g)->buffer2 = false;
+    g->priv           = gfxAlloc(sizeof(PrivData));
+    PRIV(g)->buffer2  = false;
     PRIV(g)->data_pos = 0;
 
     // Initialise the board interface
@@ -139,22 +146,21 @@ LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
     release_bus(g);
 
     /* Initialise the GDISP structure */
-    g->g.Width = GDISP_SCREEN_WIDTH;
-    g->g.Height = GDISP_SCREEN_HEIGHT;
+    g->g.Width       = GDISP_SCREEN_WIDTH;
+    g->g.Height      = GDISP_SCREEN_HEIGHT;
     g->g.Orientation = GDISP_ROTATE_0;
-    g->g.Powermode = powerOff;
-    g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
-    g->g.Contrast = GDISP_INITIAL_CONTRAST;
+    g->g.Powermode   = powerOff;
+    g->g.Backlight   = GDISP_INITIAL_BACKLIGHT;
+    g->g.Contrast    = GDISP_INITIAL_CONTRAST;
     return TRUE;
 }
 
-#if GDISP_HARDWARE_FLUSH
+#    if GDISP_HARDWARE_FLUSH
 LLDSPEC void gdisp_lld_flush(GDisplay *g) {
-    unsigned    p;
+    unsigned p;
 
     // Don't flush if we don't need it.
-    if (!(g->flags & GDISP_FLG_NEEDFLUSH))
-        return;
+    if (!(g->flags & GDISP_FLG_NEEDFLUSH)) return;
 
     acquire_bus(g);
     enter_cmd_mode(g);
@@ -166,7 +172,7 @@ LLDSPEC void gdisp_lld_flush(GDisplay *g) {
         write_cmd(g, ST7565_RMW);
         flush_cmd(g);
         enter_data_mode(g);
-        write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
+        write_data(g, RAM(g) + (p * GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
         enter_cmd_mode(g);
     }
     unsigned line = (PRIV(g)->buffer2 ? 32 : 0);
@@ -177,30 +183,30 @@ LLDSPEC void gdisp_lld_flush(GDisplay *g) {
 
     g->flags &= ~GDISP_FLG_NEEDFLUSH;
 }
-#endif
+#    endif
 
-#if GDISP_HARDWARE_DRAWPIXEL
+#    if GDISP_HARDWARE_DRAWPIXEL
 LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
-    coord_t        x, y;
-
-    switch(g->g.Orientation) {
-    default:
-    case GDISP_ROTATE_0:
-        x = g->p.x;
-        y = g->p.y;
-        break;
-    case GDISP_ROTATE_90:
-        x = g->p.y;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
-        break;
-    case GDISP_ROTATE_180:
-        x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        break;
-    case GDISP_ROTATE_270:
-        x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        y = g->p.x;
-        break;
+    coord_t x, y;
+
+    switch (g->g.Orientation) {
+        default:
+        case GDISP_ROTATE_0:
+            x = g->p.x;
+            y = g->p.y;
+            break;
+        case GDISP_ROTATE_90:
+            x = g->p.y;
+            y = GDISP_SCREEN_HEIGHT - 1 - g->p.x;
+            break;
+        case GDISP_ROTATE_180:
+            x = GDISP_SCREEN_WIDTH - 1 - g->p.x;
+            y = GDISP_SCREEN_HEIGHT - 1 - g->p.y;
+            break;
+        case GDISP_ROTATE_270:
+            x = GDISP_SCREEN_HEIGHT - 1 - g->p.y;
+            y = g->p.x;
+            break;
     }
     if (gdispColor2Native(g->p.color) != Black)
         RAM(g)[xyaddr(x, y)] |= xybit(y);
@@ -208,53 +214,52 @@ LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
         RAM(g)[xyaddr(x, y)] &= ~xybit(y);
     g->flags |= GDISP_FLG_NEEDFLUSH;
 }
-#endif
+#    endif
 
-#if GDISP_HARDWARE_PIXELREAD
+#    if GDISP_HARDWARE_PIXELREAD
 LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
-    coord_t        x, y;
-
-    switch(g->g.Orientation) {
-    default:
-    case GDISP_ROTATE_0:
-        x = g->p.x;
-        y = g->p.y;
-        break;
-    case GDISP_ROTATE_90:
-        x = g->p.y;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
-        break;
-    case GDISP_ROTATE_180:
-        x = GDISP_SCREEN_WIDTH-1 - g->p.x;
-        y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        break;
-    case GDISP_ROTATE_270:
-        x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
-        y = g->p.x;
-        break;
+    coord_t x, y;
+
+    switch (g->g.Orientation) {
+        default:
+        case GDISP_ROTATE_0:
+            x = g->p.x;
+            y = g->p.y;
+            break;
+        case GDISP_ROTATE_90:
+            x = g->p.y;
+            y = GDISP_SCREEN_HEIGHT - 1 - g->p.x;
+            break;
+        case GDISP_ROTATE_180:
+            x = GDISP_SCREEN_WIDTH - 1 - g->p.x;
+            y = GDISP_SCREEN_HEIGHT - 1 - g->p.y;
+            break;
+        case GDISP_ROTATE_270:
+            x = GDISP_SCREEN_HEIGHT - 1 - g->p.y;
+            y = g->p.x;
+            break;
     }
     return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black;
 }
-#endif
+#    endif
 
 LLDSPEC void gdisp_lld_blit_area(GDisplay *g) {
-    uint8_t* buffer = (uint8_t*)g->p.ptr;
-    int linelength = g->p.cx;
+    uint8_t *buffer     = (uint8_t *)g->p.ptr;
+    int      linelength = g->p.cx;
     for (int i = 0; i < g->p.cy; i++) {
-        unsigned dstx = g->p.x;
-        unsigned dsty = g->p.y + i;
-        unsigned srcx = g->p.x1;
-        unsigned srcy = g->p.y1 + i;
+        unsigned dstx   = g->p.x;
+        unsigned dsty   = g->p.y + i;
+        unsigned srcx   = g->p.x1;
+        unsigned srcy   = g->p.y1 + i;
         unsigned srcbit = srcy * g->p.x2 + srcx;
-        for(int j=0; j < linelength; j++) {
-            uint8_t src = buffer[srcbit / 8];
-            uint8_t bit = 7-(srcbit % 8);
-            uint8_t bitset = (src >> bit) & 1;
-            uint8_t* dst = &(RAM(g)[xyaddr(dstx, dsty)]);
+        for (int j = 0; j < linelength; j++) {
+            uint8_t  src    = buffer[srcbit / 8];
+            uint8_t  bit    = 7 - (srcbit % 8);
+            uint8_t  bitset = (src >> bit) & 1;
+            uint8_t *dst    = &(RAM(g)[xyaddr(dstx, dsty)]);
             if (bitset) {
                 *dst |= xybit(dsty);
-            }
-            else {
+            } else {
                 *dst &= ~xybit(dsty);
             }
             dstx++;
@@ -264,66 +269,64 @@ LLDSPEC void gdisp_lld_blit_area(GDisplay *g) {
     g->flags |= GDISP_FLG_NEEDFLUSH;
 }
 
-#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
+#    if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
 LLDSPEC void gdisp_lld_control(GDisplay *g) {
-    switch(g->p.x) {
-    case GDISP_CONTROL_POWER:
-        if (g->g.Powermode == (powermode_t)g->p.ptr)
-            return;
-        switch((powermode_t)g->p.ptr) {
-        case powerOff:
-        case powerSleep:
-        case powerDeepSleep:
-            acquire_bus(g);
-            enter_cmd_mode(g);
-            write_cmd(g, ST7565_DISPLAY_OFF);
-            flush_cmd(g);
-            release_bus(g);
-            break;
-        case powerOn:
-            acquire_bus(g);
-            enter_cmd_mode(g);
-            write_cmd(g, ST7565_DISPLAY_ON);
-            flush_cmd(g);
-            release_bus(g);
-            break;
-        default:
+    switch (g->p.x) {
+        case GDISP_CONTROL_POWER:
+            if (g->g.Powermode == (powermode_t)g->p.ptr) return;
+            switch ((powermode_t)g->p.ptr) {
+                case powerOff:
+                case powerSleep:
+                case powerDeepSleep:
+                    acquire_bus(g);
+                    enter_cmd_mode(g);
+                    write_cmd(g, ST7565_DISPLAY_OFF);
+                    flush_cmd(g);
+                    release_bus(g);
+                    break;
+                case powerOn:
+                    acquire_bus(g);
+                    enter_cmd_mode(g);
+                    write_cmd(g, ST7565_DISPLAY_ON);
+                    flush_cmd(g);
+                    release_bus(g);
+                    break;
+                default:
+                    return;
+            }
+            g->g.Powermode = (powermode_t)g->p.ptr;
             return;
-        }
-        g->g.Powermode = (powermode_t)g->p.ptr;
-        return;
 
         case GDISP_CONTROL_ORIENTATION:
-            if (g->g.Orientation == (orientation_t)g->p.ptr)
-                return;
-            switch((orientation_t)g->p.ptr) {
-            /* Rotation is handled by the drawing routines */
-            case GDISP_ROTATE_0:
-            case GDISP_ROTATE_180:
-                g->g.Height = GDISP_SCREEN_HEIGHT;
-                g->g.Width = GDISP_SCREEN_WIDTH;
-                break;
-            case GDISP_ROTATE_90:
-            case GDISP_ROTATE_270:
-                g->g.Height = GDISP_SCREEN_WIDTH;
-                g->g.Width = GDISP_SCREEN_HEIGHT;
-                break;
-            default:
-                return;
+            if (g->g.Orientation == (orientation_t)g->p.ptr) return;
+            switch ((orientation_t)g->p.ptr) {
+                /* Rotation is handled by the drawing routines */
+                case GDISP_ROTATE_0:
+                case GDISP_ROTATE_180:
+                    g->g.Height = GDISP_SCREEN_HEIGHT;
+                    g->g.Width  = GDISP_SCREEN_WIDTH;
+                    break;
+                case GDISP_ROTATE_90:
+                case GDISP_ROTATE_270:
+                    g->g.Height = GDISP_SCREEN_WIDTH;
+                    g->g.Width  = GDISP_SCREEN_HEIGHT;
+                    break;
+                default:
+                    return;
             }
             g->g.Orientation = (orientation_t)g->p.ptr;
             return;
 
-            case GDISP_CONTROL_CONTRAST:
-                g->g.Contrast = (unsigned)g->p.ptr & 63;
-                acquire_bus(g);
-                enter_cmd_mode(g);
-                write_cmd2(g, ST7565_CONTRAST, g->g.Contrast);
-                flush_cmd(g);
-                release_bus(g);
-                return;
+        case GDISP_CONTROL_CONTRAST:
+            g->g.Contrast = (unsigned)g->p.ptr & 63;
+            acquire_bus(g);
+            enter_cmd_mode(g);
+            write_cmd2(g, ST7565_CONTRAST, g->g.Contrast);
+            flush_cmd(g);
+            release_bus(g);
+            return;
     }
 }
-#endif // GDISP_NEED_CONTROL
+#    endif  // GDISP_NEED_CONTROL
 
-#endif // GFX_USE_GDISP
+#endif  // GFX_USE_GDISP
diff --git a/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h b/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h
index 4446bd38bc..9ab5daac1c 100644
--- a/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h
+++ b/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h
@@ -14,14 +14,14 @@
 /* Driver hardware support.                                                  */
 /*===========================================================================*/
 
-#define GDISP_HARDWARE_FLUSH            TRUE        // This controller requires flushing
-#define GDISP_HARDWARE_DRAWPIXEL        TRUE
-#define GDISP_HARDWARE_PIXELREAD        TRUE
-#define GDISP_HARDWARE_CONTROL          TRUE
-#define GDISP_HARDWARE_BITFILLS         TRUE
+#    define GDISP_HARDWARE_FLUSH TRUE  // This controller requires flushing
+#    define GDISP_HARDWARE_DRAWPIXEL TRUE
+#    define GDISP_HARDWARE_PIXELREAD TRUE
+#    define GDISP_HARDWARE_CONTROL TRUE
+#    define GDISP_HARDWARE_BITFILLS TRUE
 
-#define GDISP_LLD_PIXELFORMAT           GDISP_PIXELFORMAT_MONO
+#    define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO
 
-#endif    /* GFX_USE_GDISP */
+#endif /* GFX_USE_GDISP */
 
-#endif    /* _GDISP_LLD_CONFIG_H */
+#endif /* _GDISP_LLD_CONFIG_H */
diff --git a/drivers/ugfx/gdisp/st7565/st7565.h b/drivers/ugfx/gdisp/st7565/st7565.h
index 24924ff050..3c77a88569 100644
--- a/drivers/ugfx/gdisp/st7565/st7565.h
+++ b/drivers/ugfx/gdisp/st7565/st7565.h
@@ -8,32 +8,32 @@
 #ifndef _ST7565_H
 #define _ST7565_H
 
-#define ST7565_CONTRAST             0x81
-#define ST7565_ALLON_NORMAL         0xA4
-#define ST7565_ALLON                0xA5
-#define ST7565_POSITIVE_DISPLAY     0xA6
-#define ST7565_INVERT_DISPLAY       0xA7
-#define ST7565_DISPLAY_OFF          0xAE
-#define ST7565_DISPLAY_ON           0xAF
+#define ST7565_CONTRAST 0x81
+#define ST7565_ALLON_NORMAL 0xA4
+#define ST7565_ALLON 0xA5
+#define ST7565_POSITIVE_DISPLAY 0xA6
+#define ST7565_INVERT_DISPLAY 0xA7
+#define ST7565_DISPLAY_OFF 0xAE
+#define ST7565_DISPLAY_ON 0xAF
 
-#define ST7565_LCD_BIAS_7           0xA3
-#define ST7565_LCD_BIAS_9           0xA2
+#define ST7565_LCD_BIAS_7 0xA3
+#define ST7565_LCD_BIAS_9 0xA2
 
-#define ST7565_ADC_NORMAL           0xA0
-#define ST7565_ADC_REVERSE          0xA1
+#define ST7565_ADC_NORMAL 0xA0
+#define ST7565_ADC_REVERSE 0xA1
 
-#define ST7565_COM_SCAN_INC         0xC0
-#define ST7565_COM_SCAN_DEC         0xC8
+#define ST7565_COM_SCAN_INC 0xC0
+#define ST7565_COM_SCAN_DEC 0xC8
 
-#define ST7565_START_LINE           0x40
-#define ST7565_PAGE                 0xB0
-#define ST7565_COLUMN_MSB           0x10
-#define ST7565_COLUMN_LSB           0x00
-#define ST7565_RMW                  0xE0
+#define ST7565_START_LINE 0x40
+#define ST7565_PAGE 0xB0
+#define ST7565_COLUMN_MSB 0x10
+#define ST7565_COLUMN_LSB 0x00
+#define ST7565_RMW 0xE0
 
-#define ST7565_RESISTOR_RATIO       0x20
-#define ST7565_POWER_CONTROL        0x28
+#define ST7565_RESISTOR_RATIO 0x20
+#define ST7565_POWER_CONTROL 0x28
 
-#define ST7565_RESET                0xE2
+#define ST7565_RESET 0xE2
 
 #endif /* _ST7565_H */
author	skullY <skullydazed@gmail.com>	2019-08-30 11:19:03 -0700
committer	skullydazed <skullydazed@users.noreply.github.com>	2019-08-30 15:01:52 -0700
commit	b624f32f944acdc59dcb130674c09090c5c404cb (patch)
tree	bc13adbba137d122d9a2c2fb2fafcbb08ac10e25 /drivers
parent	61af76a10d00aba185b8338604171de490a13e3b (diff)