summaryrefslogtreecommitdiff
path: root/converter
diff options
context:
space:
mode:
authortmk <nobody@nowhere>2014-08-26 17:34:10 +0900
committertmk <nobody@nowhere>2014-08-26 17:34:10 +0900
commit8b9c61ade54c3018970d94dfbc319a69f29ac6af (patch)
treedf3e0bd06bbfb30d6f9a8945bfe3c15800e8b54a /converter
parentb316f19871ab39e6a75146d74a3b5cca37165f3c (diff)
Revert ps2_usb/Makefile and config.h
Diffstat (limited to 'converter')
-rw-r--r--converter/ps2_usb/Makefile13
-rw-r--r--converter/ps2_usb/config.h40
2 files changed, 1 insertions, 52 deletions
diff --git a/converter/ps2_usb/Makefile b/converter/ps2_usb/Makefile
index f20039c6f0..1dd23c157e 100644
--- a/converter/ps2_usb/Makefile
+++ b/converter/ps2_usb/Makefile
@@ -91,19 +91,6 @@ PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomen
#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
#PS2_USE_BUSYWAIT = yes # uses primitive reference code
-# Serial Mouse Options
-# You can choose a mouse protocol and the implementation of
-# the underlying serial connection.
-#
-#SERIAL_MOUSE_MICROSOFT_ENABLE = yes # Enable support for Microsoft-compatible mice
-#SERIAL_MOUSE_MOUSESYSTEMS_ENABLE = yes # Enable support for Mousesystems-compatible mice
-#SERIAL_MOUSE_USE_UART = yes # use hardware UART for serial connection
-#SERIAL_MOUSE_USE_SOFT = yes # use software serial implementation
-
-# Optional serial mouse driver features
-# Support scrolling while holding the middle mouse button
-# (currently only supported for Mousesystems mice):
-#OPT_DEFS += -DSERIAL_MOUSE_CENTER_SCROLL
# Optimize size but this may cause error "relocation truncated to fit"
#EXTRALDFLAGS = -Wl,--relax
diff --git a/converter/ps2_usb/config.h b/converter/ps2_usb/config.h
index 5b644002dc..c9bab1b072 100644
--- a/converter/ps2_usb/config.h
+++ b/converter/ps2_usb/config.h
@@ -69,7 +69,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define PS2_DATA_PORT PORTD
#define PS2_DATA_PIN PIND
#define PS2_DATA_DDR DDRD
-#define PS2_DATA_BIT 0
+#define PS2_DATA_BIT 2
#define PS2_INT_INIT() do { \
EICRA |= ((1<<ISC11) | \
(0<<ISC10)); \
@@ -170,42 +170,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#endif
#endif
-#ifdef SERIAL_MOUSE_MICROSOFT
- /*
- * Serial(USART) configuration (for Microsoft serial mice)
- * asynchronous, positive logic, 1200baud, bit order: LSB first
- * 1-start bit, 7-data bit, no parity, 1-stop bit
- */
- #define SERIAL_UART_BAUD 1200
- #define SERIAL_UART_DATA UDR1
- #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
- #define SERIAL_UART_RXD_VECT USART1_RX_vect
- #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
- #define SERIAL_UART_INIT() do { \
- UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
- UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
- UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
- UCSR1C = (1<<UCSZ11) | (0<<UCSZ10); /* no parity, 1 stop bit, 7-bit characters */ \
- sei(); \
- } while(0)
-#elif defined(SERIAL_MOUSE_MOUSESYSTEMS)
- /*
- * Serial(USART) configuration (for Mousesystems serial mice)
- * asynchronous, positive logic, 1200baud, bit order: LSB first
- * 1-start bit, 8-data bit, no parity, 1-stop bit
- */
- #define SERIAL_UART_BAUD 1200
- #define SERIAL_UART_DATA UDR1
- #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
- #define SERIAL_UART_RXD_VECT USART1_RX_vect
- #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
- #define SERIAL_UART_INIT() do { \
- UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
- UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
- UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
- UCSR1C = (1<<UCSZ11) | (1<<UCSZ10); /* no parity, 1 stop bit, 8-bit characters */ \
- sei(); \
- } while(0)
-#endif
-
#endif