Add serialmouser_usb project

1 files changed, 119 insertions, 0 deletions

diff --git a/converter/serialmouse_usb/config.h b/converter/serialmouse_usb/config.h
new file mode 100644
index 0000000000..b257d997cf
--- /dev/null
+++ b/converter/serialmouse_usb/config.h
@@ -0,0 +1,119 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include <avr/interrupt.h>
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x2222
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    t.m.k.
+#define PRODUCT         serial mouse converter
+#define DESCRIPTION     convert serial mouse into USB
+
+
+/* matrix size */
+#define MATRIX_ROWS 0
+#define MATRIX_COLS 0
+
+
+/* key combination for command */
+#define IS_COMMAND()    false
+
+
+
+#ifdef SERIAL_MOUSE_MICROSOFT
+    /*
+     * Serial(USART) configuration (for Microsoft serial mice)
+     *     asynchronous, positive logic, 1200baud, bit order: LSB first
+     *     1-start bit, 7-data bit, no parity, 1-stop bit
+     */
+    #define SERIAL_UART_BAUD       1200
+    #define SERIAL_UART_DATA       UDR1
+    #define SERIAL_UART_UBRR       ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
+    #define SERIAL_UART_RXD_VECT   USART1_RX_vect
+    #define SERIAL_UART_TXD_READY  (UCSR1A&(1<<UDRE1))
+    #define SERIAL_UART_INIT()     do { \
+        UBRR1L = (uint8_t) SERIAL_UART_UBRR;       /* baud rate */ \
+        UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8);  /* baud rate */ \
+        UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
+        UCSR1C = (1<<UCSZ11) | (0<<UCSZ10);  /* no parity, 1 stop bit, 7-bit characters */ \
+        sei(); \
+    } while(0)
+
+    // for Microsoft mouse protocol
+    /* Serial(USART) configuration
+     *     asynchronous, negative logic, 1200baud, no flow control
+     *     1-start bit, 7-data bit, non parity, 1-stop bit
+     */
+    #define SERIAL_SOFT_BAUD            1200
+    #define SERIAL_SOFT_DATA_7BIT
+    #define SERIAL_SOFT_PARITY_NONE
+    #define SERIAL_SOFT_BIT_ORDER_LSB
+    #define SERIAL_SOFT_LOGIC_NEGATIVE
+    /* RXD Port */
+    #define SERIAL_SOFT_RXD_DDR         DDRD
+    #define SERIAL_SOFT_RXD_PORT        PORTD
+    #define SERIAL_SOFT_RXD_PIN         PIND
+    #define SERIAL_SOFT_RXD_BIT         2
+    #define SERIAL_SOFT_RXD_VECT        INT2_vect
+    /* RXD Interupt */
+    #define SERIAL_SOFT_RXD_INIT()      do { \
+        /* pin configuration: input with pull-up */ \
+        SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \
+        SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \
+        /* enable interrupt: INT2(rising edge) */ \
+        EICRA |= ((1<<ISC21)|(1<<ISC20)); \
+        EIMSK |= (1<<INT2); \
+        sei(); \
+    } while (0)
+    #define SERIAL_SOFT_RXD_INT_ENTER()
+    #define SERIAL_SOFT_RXD_INT_EXIT()  do { \
+        /* clear interrupt  flag */ \
+        EIFR = (1<<INTF2); \
+    } while (0)
+    #define SERIAL_SOFT_RXD_READ()      (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT))
+    /* TXD Port */
+    #define SERIAL_SOFT_TXD_HI()
+    #define SERIAL_SOFT_TXD_LO()
+    #define SERIAL_SOFT_TXD_INIT()
+#elif defined(SERIAL_MOUSE_MOUSESYSTEMS)
+    /*
+     * Serial(USART) configuration (for Mousesystems serial mice)
+     *     asynchronous, positive logic, 1200baud, bit order: LSB first
+     *     1-start bit, 8-data bit, no parity, 1-stop bit
+     */
+    #define SERIAL_UART_BAUD       1200
+    #define SERIAL_UART_DATA       UDR1
+    #define SERIAL_UART_UBRR       ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
+    #define SERIAL_UART_RXD_VECT   USART1_RX_vect
+    #define SERIAL_UART_TXD_READY  (UCSR1A&(1<<UDRE1))
+    #define SERIAL_UART_INIT()     do { \
+        UBRR1L = (uint8_t) SERIAL_UART_UBRR;       /* baud rate */ \
+        UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8);  /* baud rate */ \
+        UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
+        UCSR1C = (1<<UCSZ11) | (1<<UCSZ10);  /* no parity, 1 stop bit, 8-bit characters */ \
+        sei(); \
+    } while(0)
+#endif
+
+
+
+
+#endif