diff options
Diffstat (limited to 'm4/libmikmod.m4')
| -rw-r--r-- | m4/libmikmod.m4 | 207 |
1 files changed, 0 insertions, 207 deletions
diff --git a/m4/libmikmod.m4 b/m4/libmikmod.m4 deleted file mode 100644 index 18feebec..00000000 --- a/m4/libmikmod.m4 +++ /dev/null @@ -1,207 +0,0 @@ -# Configure paths for libmikmod -# -# Derived from glib.m4 (Owen Taylor 97-11-3) -# Improved by Chris Butler -# - -dnl AM_PATH_LIBMIKMOD([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND ]]]) -dnl Test for libmikmod, and define LIBMIKMOD_CFLAGS, LIBMIKMOD_LIBS and -dnl LIBMIKMOD_LDADD -dnl -AC_DEFUN([AM_PATH_LIBMIKMOD], -[dnl -dnl Get the cflags and libraries from the libmikmod-config script -dnl -AC_ARG_WITH(libmikmod-prefix,[ --with-libmikmod-prefix=PFX Prefix where libmikmod is installed (optional)], - libmikmod_config_prefix="$withval", libmikmod_config_prefix="") -AC_ARG_WITH(libmikmod-exec-prefix,[ --with-libmikmod-exec-prefix=PFX Exec prefix where libmikmod is installed (optional)], - libmikmod_config_exec_prefix="$withval", libmikmod_config_exec_prefix="") -AC_ARG_ENABLE(libmikmodtest, [ --disable-libmikmodtest Do not try to compile and run a test libmikmod program], - , enable_libmikmodtest=yes) - - if test x$libmikmod_config_exec_prefix != x ; then - libmikmod_config_args="$libmikmod_config_args --exec-prefix=$libmikmod_config_exec_prefix" - if test x${LIBMIKMOD_CONFIG+set} != xset ; then - LIBMIKMOD_CONFIG=$libmikmod_config_exec_prefix/bin/libmikmod-config - fi - fi - if test x$libmikmod_config_prefix != x ; then - libmikmod_config_args="$libmikmod_config_args --prefix=$libmikmod_config_prefix" - if test x${LIBMIKMOD_CONFIG+set} != xset ; then - LIBMIKMOD_CONFIG=$libmikmod_config_prefix/bin/libmikmod-config - fi - fi - - AC_PATH_PROG(LIBMIKMOD_CONFIG, libmikmod-config, no) - min_libmikmod_version=ifelse([$1], ,3.1.5,$1) - AC_MSG_CHECKING(for libmikmod - version >= $min_libmikmod_version) - no_libmikmod="" - if test "$LIBMIKMOD_CONFIG" = "no" ; then - no_libmikmod=yes - else - LIBMIKMOD_CFLAGS=`$LIBMIKMOD_CONFIG $libmikmod_config_args --cflags` - LIBMIKMOD_LIBS=`$LIBMIKMOD_CONFIG $libmikmod_config_args --libs` - LIBMIKMOD_LDADD=`$LIBMIKMOD_CONFIG $libmikmod_config_args --ldadd` - libmikmod_config_major_version=`$LIBMIKMOD_CONFIG $libmikmod_config_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\).*/\1/'` - libmikmod_config_minor_version=`$LIBMIKMOD_CONFIG $libmikmod_config_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\).*/\2/'` - libmikmod_config_micro_version=`$LIBMIKMOD_CONFIG $libmikmod_config_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\).*/\3/'` - if test "x$enable_libmikmodtest" = "xyes" ; then - ac_save_CFLAGS="$CFLAGS" - ac_save_LIBS="$LIBS" - AC_LANG_SAVE - AC_LANG_C - CFLAGS="$CFLAGS $LIBMIKMOD_CFLAGS $LIBMIKMOD_LDADD" - LIBS="$LIBMIKMOD_LIBS $LIBS" -dnl -dnl Now check if the installed libmikmod is sufficiently new. (Also sanity -dnl checks the results of libmikmod-config to some extent -dnl - rm -f conf.mikmodtest - AC_TRY_RUN([ -#include <mikmod.h> -#include <stdio.h> -#include <stdlib.h> - -char* my_strdup (char *str) -{ - char *new_str; - - if (str) { - new_str = malloc ((strlen (str) + 1) * sizeof(char)); - strcpy (new_str, str); - } else - new_str = NULL; - - return new_str; -} - -int main() -{ - int major,minor,micro; - int libmikmod_major_version,libmikmod_minor_version,libmikmod_micro_version; - char *tmp_version; - - system("touch conf.mikmodtest"); - - /* HP/UX 9 (%@#!) writes to sscanf strings */ - tmp_version = my_strdup("$min_libmikmod_version"); - if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { - printf("%s, bad version string\n", "$min_libmikmod_version"); - exit(1); - } - - libmikmod_major_version=(MikMod_GetVersion() >> 16) & 255; - libmikmod_minor_version=(MikMod_GetVersion() >> 8) & 255; - libmikmod_micro_version=(MikMod_GetVersion() ) & 255; - - if ((libmikmod_major_version != $libmikmod_config_major_version) || - (libmikmod_minor_version != $libmikmod_config_minor_version) || - (libmikmod_micro_version != $libmikmod_config_micro_version)) - { - printf("\n*** 'libmikmod-config --version' returned %d.%d.%d, but libmikmod (%d.%d.%d)\n", - $libmikmod_config_major_version, $libmikmod_config_minor_version, $libmikmod_config_micro_version, - libmikmod_major_version, libmikmod_minor_version, libmikmod_micro_version); - printf ("*** was found! If libmikmod-config was correct, then it is best\n"); - printf ("*** to remove the old version of libmikmod. You may also be able to fix the error\n"); - printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); - printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); - printf("*** required on your system.\n"); - printf("*** If libmikmod-config was wrong, set the environment variable LIBMIKMOD_CONFIG\n"); - printf("*** to point to the correct copy of libmikmod-config, and remove the file config.cache\n"); - printf("*** before re-running configure\n"); - } - else if ((libmikmod_major_version != LIBMIKMOD_VERSION_MAJOR) || - (libmikmod_minor_version != LIBMIKMOD_VERSION_MINOR) || - (libmikmod_micro_version != LIBMIKMOD_REVISION)) - { - printf("*** libmikmod header files (version %d.%d.%d) do not match\n", - LIBMIKMOD_VERSION_MAJOR, LIBMIKMOD_VERSION_MINOR, LIBMIKMOD_REVISION); - printf("*** library (version %d.%d.%d)\n", - libmikmod_major_version, libmikmod_minor_version, libmikmod_micro_version); - } - else - { - if ((libmikmod_major_version > major) || - ((libmikmod_major_version == major) && (libmikmod_minor_version > minor)) || - ((libmikmod_major_version == major) && (libmikmod_minor_version == minor) && (libmikmod_micro_version >= micro))) - { - return 0; - } - else - { - printf("\n*** An old version of libmikmod (%d.%d.%d) was found.\n", - libmikmod_major_version, libmikmod_minor_version, libmikmod_micro_version); - printf("*** You need a version of libmikmod newer than %d.%d.%d.\n", - major, minor, micro); - printf("***\n"); - printf("*** If you have already installed a sufficiently new version, this error\n"); - printf("*** probably means that the wrong copy of the libmikmod-config shell script is\n"); - printf("*** being found. The easiest way to fix this is to remove the old version\n"); - printf("*** of libmikmod, but you can also set the LIBMIKMOD_CONFIG environment to point to the\n"); - printf("*** correct copy of libmikmod-config. (In this case, you will have to\n"); - printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); - printf("*** so that the correct libraries are found at run-time))\n"); - } - } - return 1; -} -],, no_libmikmod=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) - CFLAGS="$ac_save_CFLAGS" - LIBS="$ac_save_LIBS" - AC_LANG_RESTORE - fi - fi - if test "x$no_libmikmod" = x ; then - AC_MSG_RESULT([yes, `$LIBMIKMOD_CONFIG --version`]) - ifelse([$2], , :, [$2]) - else - AC_MSG_RESULT(no) - if test "$LIBMIKMOD_CONFIG" = "no" ; then - echo "*** The libmikmod-config script installed by libmikmod could not be found" - echo "*** If libmikmod was installed in PREFIX, make sure PREFIX/bin is in" - echo "*** your path, or set the LIBMIKMOD_CONFIG environment variable to the" - echo "*** full path to libmikmod-config." - else - if test -f conf.mikmodtest ; then - : - else - echo "*** Could not run libmikmod test program, checking why..." - CFLAGS="$CFLAGS $LIBMIKMOD_CFLAGS" - LIBS="$LIBS $LIBMIKMOD_LIBS" - AC_LANG_SAVE - AC_LANG_C - AC_TRY_LINK([ -#include <mikmod.h> -#include <stdio.h> -], [ return (MikMod_GetVersion()!=0); ], - [ echo "*** The test program compiled, but did not run. This usually means" - echo "*** that the run-time linker is not finding libmikmod or finding the wrong" - echo "*** version of libmikmod. If it is not finding libmikmod, you'll need to set your" - echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" - echo "*** to the installed location. Also, make sure you have run ldconfig if that" - echo "*** is required on your system." - echo "***" - echo "*** If you have an old version installed, it is best to remove it, although" - echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], - [ echo "*** The test program failed to compile or link. See the file config.log for the" - echo "*** exact error that occured. This usually means libmikmod was incorrectly installed" - echo "*** or that you have moved libmikmod since it was installed. In the latter case, you" - echo "*** may want to edit the libmikmod-config script: $LIBMIKMOD_CONFIG" ]) - CFLAGS="$ac_save_CFLAGS" - LIBS="$ac_save_LIBS" - AC_LANG_RESTORE - fi - fi - LIBMIKMOD_CFLAGS="" - LIBMIKMOD_LIBS="" - LIBMIKMOD_LDADD="" - ifelse([$3], , :, [$3]) - fi - AC_SUBST(LIBMIKMOD_CFLAGS) - AC_SUBST(LIBMIKMOD_LIBS) - AC_SUBST(LIBMIKMOD_LDADD) - rm -f conf.mikmodtest -]) |