diff options
Diffstat (limited to 'libavcodec/bfin/fdct_bfin.S')
-rw-r--r-- | libavcodec/bfin/fdct_bfin.S | 325 |
1 files changed, 0 insertions, 325 deletions
diff --git a/libavcodec/bfin/fdct_bfin.S b/libavcodec/bfin/fdct_bfin.S deleted file mode 100644 index 2525e0dd18..0000000000 --- a/libavcodec/bfin/fdct_bfin.S +++ /dev/null @@ -1,325 +0,0 @@ -/* - * fdct BlackFin - * - * Copyright (C) 2007 Marc Hoffman <marc.hoffman@analog.com> - * - * This file is part of Libav. - * - * Libav is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public - * License as published by the Free Software Foundation; either - * version 2.1 of the License, or (at your option) any later version. - * - * Libav is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * Lesser General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public - * License along with Libav; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA - */ -/* - void ff_bfin_fdct (int16_t *buf); - - This implementation works only for 8x8 input. The range of input - must be -256 to 255 i.e. 8bit input represented in a 16bit data - word. The original data must be sign extended into the 16bit data - words. - - - Chen factorization of - - 8 - X(m) = sum (x(n) * cos ((2n+1)*m*pi/16)) - n=0 - - C4 - 0 --*-------------*0+7---*-----*0+3-------*-*-------------------> 0 - \ / \ / X S4,S4 - 1 --*-\---------/-*1+6---*-\-/-*1+2-------*-*-------------------> 4 - \ / \ -C4 C3 - 2 --*---\-----/---*2+5---*-/-\-*1-2---------------*-*-----------> 2 - \ / / \ X S3,-S3 - 3 --*-----\-/-----*3+4---*-----*0-3---------------*-*-----------> 6 - / C7 C3 - 4 --*-----/-\-----*3-4------------*-*4+5--*-----*---------------> 1 - / \ -C4 X \ /S7 C3 - 5 --*---/-----\---*2-5---*-*------*=*4-5----\-/------*-*--------> 5 - / \ X S4,S4 / X S3,-S3 - 6 --*-/---------\-*1-6---*-*------*=*7-6----/-\------*-*--------> 3 - / \ C4 X / \-S7 C3 - --*-------------*0-7------------*-*7+6--*-----*---------------> 7 - C7 - -Notation - Cn = cos(n*pi/8) used throughout the code. - - - Registers used: - R0, R1, R2, R3, R4, R5, R6,R7, P0, P1, P2, P3, P4, P5, A0, A1. - Other registers used: - I0, I1, I2, I3, B0, B2, B3, M0, M1, L3 registers and LC0. - - Input - r0 - pointer to start of int16_t *block - - Output - The DCT output coefficients in the int16_t *block - - Register constraint: - This code is called from jpeg_encode. - R6, R5, R4 if modified should be stored and restored. - - - Performance: (Timer version 0.6.33) - Code Size : 240 Bytes. - Memory Required : - Input Matrix : 8 * 8 * 2 Bytes. - Coefficients : 16 Bytes - Temporary matrix: 8 * 8 * 2 Bytes. - Cycle Count :26+{18+8*(14+2S)}*2 where S -> Stalls - (7.45 c/pel) - ----------------------------------------- - | Size | Forward DCT | Inverse DCT | - ----------------------------------------- - | 8x8 | 284 Cycles | 311 Cycles | - ----------------------------------------- - -Ck = int16(cos(k/16*pi)*32767+.5)/2 -#define C4 23170 -#define C3 13623 -#define C6 6270 -#define C7 3196 - -Sk = int16(sin(k/16*pi)*32767+.5)/2 -#define S4 11585 -#define S3 9102 -#define S6 15137 -#define S7 16069 - -the coefficients are ordered as follows: -short dct_coef[] - C4,S4, - C6,S6, - C7,S7, - S3,C3, - ------------------------------------------------------------ -Libav conformance testing results ------------------------------------------------------------ -dct-test: modified with the following - dct_error("BFINfdct", 0, ff_bfin_fdct, fdct, test); -produces the following output: - -libavcodec> ./dct-test -Libav DCT/IDCT test - - 2 -131 -6 -48 -36 33 -83 24 - 34 52 -24 -15 5 92 57 143 - -67 -43 -1 74 -16 5 -71 32 - -78 106 92 -34 -38 81 20 -18 - 7 -62 40 2 -15 90 -62 -83 - -83 1 -104 -13 43 -19 7 11 - -63 31 12 -29 83 72 21 10 - -17 -63 -15 73 50 -91 159 -14 -DCT BFINfdct: err_inf=2 err2=0.16425938 syserr=0.00795000 maxout=2098 blockSumErr=27 -DCT BFINfdct: 92.1 kdct/s -*/ - -#include "libavutil/bfin/asm.h" - -SECTION_L1_DATA_B - -.align 4; -dct_coeff: -.short 0x5a82, 0x2d41, 0x187e, 0x3b21, 0x0c7c, 0x3ec5, 0x238e, 0x3537; - -SECTION_L1_DATA_A - -.align 4 -vtmp: .space 128 - -.text -DEFUN(fdct,mL1, - (int16_t *block)): - [--SP] = (R7:4, P5:3); // Push the registers onto the stack. - - b0 = r0; - RELOC(r0, P3, dct_coeff); - b3 = r0; - RELOC(r0, P3, vtmp); - b2 = r0; - - L3 = 16; // L3 is set to 16 to make the coefficient - // array Circular. - - -//---------------------------------------------------------------------------- - -/* - * I0, I1, and I2 registers are used to read the input data. I3 register is used - * to read the coefficients. P0 and P1 registers are used for writing the output - * data. - */ - M0 = 12 (X); // All these initializations are used in the - M1 = 16 (X); // modification of address offsets. - - M2 = 128 (X); - - P2 = 16; - P3 = 32 (X); - P4 = -110 (X); - P5 = -62 (X); - P0 = 2(X); - - - // Prescale the input to get the correct precision. - i0=b0; - i1=b0; - - lsetup (.0, .1) LC0 = P3; - r0=[i0++]; -.0: r1=r0<<3 (v) || r0=[i0++] ; -.1: [i1++]=r1; - - /* - * B0 points to the "in" buffer. - * B2 points to "temp" buffer in the first iteration. - */ - - lsetup (.2, .3) LC0 = P0; -.2: - I0 = B0; // I0 points to Input Element (0, 0). - I1 = B0; // Element 1 and 0 is read in R0. - I1 += M0 || R0 = [I0++]; // I1 points to Input Element (0, 6). - I2 = I1; // Element 6 is read into R3.H. - I2 -= 4 || R3.H = W[I1++]; // I2 points to Input Element (0, 4). - - I3 = B3; // I3 points to Coefficients. - P0 = B2; // P0 points to temporary array Element - // (0, 0). - P1 = B2; // P1 points to temporary array. - R7 = [P1++P2] || R2 = [I2++]; // P1 points to temporary array - // Element (1, 0). - // R7 is a dummy read. X4,X5 - // are read into R2. - R3.L = W[I1--]; // X7 is read into R3.L. - R1.H = W[I0++]; // X2 is read into R1.H. - - - /* - * X0 = (X0 + X7) / 2. - * X1 = (X1 + X6) / 2. - * X6 = (X1 - X6) / 2. - * X7 = (X0 - X7) / 2. - * It reads the data 3 in R1.L. - */ - - R0 = R0 +|+ R3, R3 = R0 -|- R3 || R1.L = W[I0++] || NOP; - - /* - * X2 = (X2 + X5) / 2. - * X3 = (X3 + X4) / 2. - * X4 = (X3 - X4) / 2. - * X5 = (X2 - X5) / 2. - * R7 = C4 = cos(4*pi/16) - */ - - R1 = R1 +|+ R2, R2 = R1 -|- R2 (CO) || NOP || R7 = [I3++]; - - /* - * At the end of stage 1 R0 has (1,0), R1 has (2,3), R2 has (4, 5) and - * R3 has (6,7). - * Where the notation (x, y) represents uper/lower half pairs. - */ - - /* - * X0 = X0 + X3. - * X1 = X1 + X2. - * X2 = X1 - X2. - * X3 = X0 - X3. - */ - R0 = R0 +|+ R1, R1 = R0 -|- R1; - - lsetup (.row0, .row1) LC1 = P2 >> 1; // 1d dct, loops 8x -.row0: - - /* - * This is part 2 computation continued..... - * A1 = X6 * cos(pi/4) - * A0 = X6 * cos(pi/4) - * A1 = A1 - X5 * cos(pi/4) - * A0 = A0 + X5 * cos(pi/4). - * The instruction W[I0] = R3.L is used for packing it to R2.L. - */ - - A1=R3.H*R7.l, A0=R3.H*R7.l || I1+=M1 || W[I0] = R3.L; - R4.H=(A1-=R2.L*R7.l), R4.L=(A0+=R2.L*R7.l) || I2+=M0 || NOP; - - /* R0 = (X1,X0) R1 = (X2,X3) R4 = (X5, X6). */ - - /* - * A1 = X0 * cos(pi/4) - * A0 = X0 * cos(pi/4) - * A1 = A1 - X1 * cos(pi/4) - * A0 = A0 + X1 * cos(pi/4) - * R7 = (C2,C6) - */ - A1=R0.L*R7.h, A0=R0.L*R7.h || NOP || R3.H=W[I1++]; - R5.H=(A1-=R0.H*R7.h),R5.L=(A0+=R0.H*R7.h) || R7=[I3++] || NOP; - - /* - * A1 = X2 * cos(3pi/8) - * A0 = X3 * cos(3pi/8) - * A1 = A1 + X3 * cos(pi/8) - * A0 = A0 - X2 * cos(pi/8) - * R3 = cos(pi/4) - * R7 = (cos(7pi/8),cos(pi/8)) - * X4 = X4 + X5. - * X5 = X4 - X5. - * X6 = X7 - X6. - * X7 = X7 + X6. - */ - A1=R1.H*R7.L, A0=R1.L*R7.L || W[P0++P3]=R5.L || R2.L=W[I0]; - R2=R2+|+R4, R4=R2-|-R4 || I0+=4 || R3.L=W[I1--]; - R6.H=(A1+=R1.L*R7.H),R6.L=(A0 -= R1.H * R7.H) || I0+=4 || R7=[I3++]; - - /* R2 = (X4, X7) R4 = (X5,X6) R5 = (X1, X0) R6 = (X2,X3). */ - - /* - * A1 = X4 * cos(7pi/16) - * A0 = X7 * cos(7pi/16) - * A1 = A1 + X7 * cos(pi/16) - * A0 = A0 - X4 * cos(pi/16) - */ - - A1=R2.H*R7.L, A0=R2.L*R7.L || W[P0++P3]=R6.H || R0=[I0++]; - R2.H=(A1+=R2.L*R7.H),R2.L=(A0-=R2.H*R7.H) || W[P0++P3]=R5.H || R7=[I3++]; - - /* - * A1 = X5 * cos(3pi/16) - * A0 = X6 * cos(3pi/16) - * A1 = A1 + X6 * cos(5pi/16) - * A0 = A0 - X5 * cos(5pi/16) - * The output values are written. - */ - - A1=R4.H*R7.H, A0=R4.L*R7.H || W[P0++P2]=R6.L || R1.H=W[I0++]; - R4.H=(A1+=R4.L*R7.L),R4.L=(A0-=R4.H*R7.L) || W[P0++P4]=R2.L || R1.L=W[I0++]; - - - /* Beginning of next stage, **pipelined** + drain and store the - rest of the column store. */ - - R0=R0+|+R3,R3=R0-|-R3 || W[P1++P3]=R2.H || R2=[I2++]; - R1=R1+|+R2,R2=R1-|-R2 (CO) || W[P1++P3]=R4.L || R7=[I3++]; -.row1: R0=R0+|+R1,R1=R0-|-R1 || W[P1++P5]=R4.H || NOP; - - // Exchange input with output. - B1 = B0; - B0 = B2; -.3: B2 = B1; - - L3=0; - (r7:4,p5:3) = [sp++]; - RTS; -DEFUN_END(fdct) |