diff options
Diffstat (limited to 'doc/avserver.conf')
| -rw-r--r-- | doc/avserver.conf | 372 |
1 files changed, 0 insertions, 372 deletions
diff --git a/doc/avserver.conf b/doc/avserver.conf deleted file mode 100644 index e1cd9fb126..0000000000 --- a/doc/avserver.conf +++ /dev/null @@ -1,372 +0,0 @@ -# Port on which the server is listening. You must select a different -# port from your standard HTTP web server if it is running on the same -# computer. -Port 8090 - -# Address on which the server is bound. Only useful if you have -# several network interfaces. -BindAddress 0.0.0.0 - -# Number of simultaneous HTTP connections that can be handled. It has -# to be defined *before* the MaxClients parameter, since it defines the -# MaxClients maximum limit. -MaxHTTPConnections 2000 - -# Number of simultaneous requests that can be handled. Since AVServer -# is very fast, it is more likely that you will want to leave this high -# and use MaxBandwidth, below. -MaxClients 1000 - -# This the maximum amount of kbit/sec that you are prepared to -# consume when streaming to clients. -MaxBandwidth 1000 - -# Access log file (uses standard Apache log file format) -# '-' is the standard output. -CustomLog - - - -################################################################## -# Definition of the live feeds. Each live feed contains one video -# and/or audio sequence coming from an avconv encoder or another -# avserver. This sequence may be encoded simultaneously with several -# codecs at several resolutions. - -<Feed feed1.ffm> - -# You must use 'avconv' to send a live feed to avserver. In this -# example, you can type: -# -# avconv http://localhost:8090/feed1.ffm - -# avserver can also do time shifting. It means that it can stream any -# previously recorded live stream. The request should contain: -# "http://xxxx?date=[YYYY-MM-DDT][[HH:]MM:]SS[.m...]".You must specify -# a path where the feed is stored on disk. You also specify the -# maximum size of the feed, where zero means unlimited. Default: -# File=/tmp/feed_name.ffm FileMaxSize=5M -File /tmp/feed1.ffm -FileMaxSize 200K - -# You could specify -# ReadOnlyFile /saved/specialvideo.ffm -# This marks the file as readonly and it will not be deleted or updated. - -# Specify launch in order to start avconv automatically. -# First avconv must be defined with an appropriate path if needed, -# after that options can follow, but avoid adding the http:// field -#Launch avconv - -# Only allow connections from localhost to the feed. -ACL allow 127.0.0.1 - -</Feed> - - -################################################################## -# Now you can define each stream which will be generated from the -# original audio and video stream. Each format has a filename (here -# 'test1.mpg'). AVServer will send this stream when answering a -# request containing this filename. - -<Stream test1.mpg> - -# coming from live feed 'feed1' -Feed feed1.ffm - -# Format of the stream : you can choose among: -# mpeg : MPEG-1 multiplexed video and audio -# mpegvideo : only MPEG-1 video -# mp2 : MPEG-2 audio (use AudioCodec to select layer 2 and 3 codec) -# ogg : Ogg format (Vorbis audio codec) -# rm : RealNetworks-compatible stream. Multiplexed audio and video. -# ra : RealNetworks-compatible stream. Audio only. -# mpjpeg : Multipart JPEG (works with Netscape without any plugin) -# jpeg : Generate a single JPEG image. -# asf : ASF compatible streaming (Windows Media Player format). -# swf : Macromedia Flash compatible stream -# avi : AVI format (MPEG-4 video, MPEG audio sound) -Format mpeg - -# Bitrate for the audio stream. Codecs usually support only a few -# different bitrates. -AudioBitRate 32 - -# Number of audio channels: 1 = mono, 2 = stereo -AudioChannels 1 - -# Sampling frequency for audio. When using low bitrates, you should -# lower this frequency to 22050 or 11025. The supported frequencies -# depend on the selected audio codec. -AudioSampleRate 44100 - -# Bitrate for the video stream -VideoBitRate 64 - -# Ratecontrol buffer size -VideoBufferSize 40 - -# Number of frames per second -VideoFrameRate 3 - -# Size of the video frame: WxH (default: 160x128) -# The following abbreviations are defined: sqcif, qcif, cif, 4cif, qqvga, -# qvga, vga, svga, xga, uxga, qxga, sxga, qsxga, hsxga, wvga, wxga, wsxga, -# wuxga, woxga, wqsxga, wquxga, whsxga, whuxga, cga, ega, hd480, hd720, -# hd1080 -VideoSize 160x128 - -# Transmit only intra frames (useful for low bitrates, but kills frame rate). -#VideoIntraOnly - -# If non-intra only, an intra frame is transmitted every VideoGopSize -# frames. Video synchronization can only begin at an intra frame. -VideoGopSize 12 - -# More MPEG-4 parameters -# VideoHighQuality -# Video4MotionVector - -# Choose your codecs: -#AudioCodec mp2 -#VideoCodec mpeg1video - -# Suppress audio -#NoAudio - -# Suppress video -#NoVideo - -#VideoQMin 3 -#VideoQMax 31 - -# Set this to the number of seconds backwards in time to start. Note that -# most players will buffer 5-10 seconds of video, and also you need to allow -# for a keyframe to appear in the data stream. -#Preroll 15 - -# ACL: - -# You can allow ranges of addresses (or single addresses) -#ACL ALLOW <first address> <last address> - -# You can deny ranges of addresses (or single addresses) -#ACL DENY <first address> <last address> - -# You can repeat the ACL allow/deny as often as you like. It is on a per -# stream basis. The first match defines the action. If there are no matches, -# then the default is the inverse of the last ACL statement. -# -# Thus 'ACL allow localhost' only allows access from localhost. -# 'ACL deny 1.0.0.0 1.255.255.255' would deny the whole of network 1 and -# allow everybody else. - -</Stream> - - -################################################################## -# Example streams - - -# Multipart JPEG - -#<Stream test.mjpg> -#Feed feed1.ffm -#Format mpjpeg -#VideoFrameRate 2 -#VideoIntraOnly -#NoAudio -#Strict -1 -#</Stream> - - -# Single JPEG - -#<Stream test.jpg> -#Feed feed1.ffm -#Format jpeg -#VideoFrameRate 2 -#VideoIntraOnly -##VideoSize 352x240 -#NoAudio -#Strict -1 -#</Stream> - - -# Flash - -#<Stream test.swf> -#Feed feed1.ffm -#Format swf -#VideoFrameRate 2 -#VideoIntraOnly -#NoAudio -#</Stream> - - -# ASF compatible - -<Stream test.asf> -Feed feed1.ffm -Format asf -VideoFrameRate 15 -VideoSize 352x240 -VideoBitRate 256 -VideoBufferSize 40 -VideoGopSize 30 -AudioBitRate 64 -StartSendOnKey -</Stream> - - -# MP3 audio - -#<Stream test.mp3> -#Feed feed1.ffm -#Format mp2 -#AudioCodec mp3 -#AudioBitRate 64 -#AudioChannels 1 -#AudioSampleRate 44100 -#NoVideo -#</Stream> - - -# Ogg Vorbis audio - -#<Stream test.ogg> -#Feed feed1.ffm -#Title "Stream title" -#AudioBitRate 64 -#AudioChannels 2 -#AudioSampleRate 44100 -#NoVideo -#</Stream> - - -# Real with audio only at 32 kbits - -#<Stream test.ra> -#Feed feed1.ffm -#Format rm -#AudioBitRate 32 -#NoVideo -#NoAudio -#</Stream> - - -# Real with audio and video at 64 kbits - -#<Stream test.rm> -#Feed feed1.ffm -#Format rm -#AudioBitRate 32 -#VideoBitRate 128 -#VideoFrameRate 25 -#VideoGopSize 25 -#NoAudio -#</Stream> - - -################################################################## -# A stream coming from a file: you only need to set the input -# filename and optionally a new format. Supported conversions: -# AVI -> ASF - -#<Stream file.rm> -#File "/usr/local/httpd/htdocs/tlive.rm" -#NoAudio -#</Stream> - -#<Stream file.asf> -#File "/usr/local/httpd/htdocs/test.asf" -#NoAudio -#Author "Me" -#Copyright "Super MegaCorp" -#Title "Test stream from disk" -#Comment "Test comment" -#</Stream> - - -################################################################## -# RTSP examples -# -# You can access this stream with the RTSP URL: -# rtsp://localhost:5454/test1-rtsp.mpg -# -# A non-standard RTSP redirector is also created. Its URL is: -# http://localhost:8090/test1-rtsp.rtsp - -#<Stream test1-rtsp.mpg> -#Format rtp -#File "/usr/local/httpd/htdocs/test1.mpg" -#</Stream> - - -# Transcode an incoming live feed to another live feed, -# using libx264 and video presets - -#<Stream live.h264> -#Format rtp -#Feed feed1.ffm -#VideoCodec libx264 -#VideoFrameRate 24 -#VideoBitRate 100 -#VideoSize 480x272 -#AVPresetVideo default -#AVPresetVideo baseline -#AVOptionVideo flags +global_header -# -#AudioCodec libfaac -#AudioBitRate 32 -#AudioChannels 2 -#AudioSampleRate 22050 -#AVOptionAudio flags +global_header -#</Stream> - -################################################################## -# SDP/multicast examples -# -# If you want to send your stream in multicast, you must set the -# multicast address with MulticastAddress. The port and the TTL can -# also be set. -# -# An SDP file is automatically generated by avserver by adding the -# 'sdp' extension to the stream name (here -# http://localhost:8090/test1-sdp.sdp). You should usually give this -# file to your player to play the stream. -# -# The 'NoLoop' option can be used to avoid looping when the stream is -# terminated. - -#<Stream test1-sdp.mpg> -#Format rtp -#File "/usr/local/httpd/htdocs/test1.mpg" -#MulticastAddress 224.124.0.1 -#MulticastPort 5000 -#MulticastTTL 16 -#NoLoop -#</Stream> - - -################################################################## -# Special streams - -# Server status - -<Stream stat.html> -Format status - -# Only allow local people to get the status -ACL allow localhost -ACL allow 192.168.0.0 192.168.255.255 - -#FaviconURL http://pond1.gladstonefamily.net:8080/favicon.ico -</Stream> - - -# Redirect index.html to the appropriate site - -<Redirect index.html> -URL http://www.libav.org/ -</Redirect> |