jfdctint: add 10-bit version

Signed-off-by: Mans Rullgard <mans@mansr.com>

1 files changed, 405 insertions, 0 deletions

diff --git a/libavcodec/jfdctint_template.c b/libavcodec/jfdctint_template.c
new file mode 100644
index 0000000000..e60e72a412
--- /dev/null
+++ b/libavcodec/jfdctint_template.c
@@ -0,0 +1,405 @@
+/*
+ * jfdctint.c
+ *
+ * This file is part of the Independent JPEG Group's software.
+ *
+ * The authors make NO WARRANTY or representation, either express or implied,
+ * with respect to this software, its quality, accuracy, merchantability, or
+ * fitness for a particular purpose.  This software is provided "AS IS", and
+ * you, its user, assume the entire risk as to its quality and accuracy.
+ *
+ * This software is copyright (C) 1991-1996, Thomas G. Lane.
+ * All Rights Reserved except as specified below.
+ *
+ * Permission is hereby granted to use, copy, modify, and distribute this
+ * software (or portions thereof) for any purpose, without fee, subject to
+ * these conditions:
+ * (1) If any part of the source code for this software is distributed, then
+ * this README file must be included, with this copyright and no-warranty
+ * notice unaltered; and any additions, deletions, or changes to the original
+ * files must be clearly indicated in accompanying documentation.
+ * (2) If only executable code is distributed, then the accompanying
+ * documentation must state that "this software is based in part on the work
+ * of the Independent JPEG Group".
+ * (3) Permission for use of this software is granted only if the user accepts
+ * full responsibility for any undesirable consequences; the authors accept
+ * NO LIABILITY for damages of any kind.
+ *
+ * These conditions apply to any software derived from or based on the IJG
+ * code, not just to the unmodified library.  If you use our work, you ought
+ * to acknowledge us.
+ *
+ * Permission is NOT granted for the use of any IJG author's name or company
+ * name in advertising or publicity relating to this software or products
+ * derived from it.  This software may be referred to only as "the Independent
+ * JPEG Group's software".
+ *
+ * We specifically permit and encourage the use of this software as the basis
+ * of commercial products, provided that all warranty or liability claims are
+ * assumed by the product vendor.
+ *
+ * This file contains a slow-but-accurate integer implementation of the
+ * forward DCT (Discrete Cosine Transform).
+ *
+ * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT
+ * on each column.  Direct algorithms are also available, but they are
+ * much more complex and seem not to be any faster when reduced to code.
+ *
+ * This implementation is based on an algorithm described in
+ *   C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT
+ *   Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics,
+ *   Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991.
+ * The primary algorithm described there uses 11 multiplies and 29 adds.
+ * We use their alternate method with 12 multiplies and 32 adds.
+ * The advantage of this method is that no data path contains more than one
+ * multiplication; this allows a very simple and accurate implementation in
+ * scaled fixed-point arithmetic, with a minimal number of shifts.
+ */
+
+/**
+ * @file
+ * Independent JPEG Group's slow & accurate dct.
+ */
+
+#include "libavutil/common.h"
+#include "dsputil.h"
+
+#include "bit_depth_template.c"
+
+#define DCTSIZE 8
+#define BITS_IN_JSAMPLE BIT_DEPTH
+#define GLOBAL(x) x
+#define RIGHT_SHIFT(x, n) ((x) >> (n))
+#define MULTIPLY16C16(var,const) ((var)*(const))
+
+#if 1 //def USE_ACCURATE_ROUNDING
+#define DESCALE(x,n)  RIGHT_SHIFT((x) + (1 << ((n) - 1)), n)
+#else
+#define DESCALE(x,n)  RIGHT_SHIFT(x, n)
+#endif
+
+
+/*
+ * This module is specialized to the case DCTSIZE = 8.
+ */
+
+#if DCTSIZE != 8
+#error  "Sorry, this code only copes with 8x8 DCTs."
+#endif
+
+
+/*
+ * The poop on this scaling stuff is as follows:
+ *
+ * Each 1-D DCT step produces outputs which are a factor of sqrt(N)
+ * larger than the true DCT outputs.  The final outputs are therefore
+ * a factor of N larger than desired; since N=8 this can be cured by
+ * a simple right shift at the end of the algorithm.  The advantage of
+ * this arrangement is that we save two multiplications per 1-D DCT,
+ * because the y0 and y4 outputs need not be divided by sqrt(N).
+ * In the IJG code, this factor of 8 is removed by the quantization step
+ * (in jcdctmgr.c), NOT in this module.
+ *
+ * We have to do addition and subtraction of the integer inputs, which
+ * is no problem, and multiplication by fractional constants, which is
+ * a problem to do in integer arithmetic.  We multiply all the constants
+ * by CONST_SCALE and convert them to integer constants (thus retaining
+ * CONST_BITS bits of precision in the constants).  After doing a
+ * multiplication we have to divide the product by CONST_SCALE, with proper
+ * rounding, to produce the correct output.  This division can be done
+ * cheaply as a right shift of CONST_BITS bits.  We postpone shifting
+ * as long as possible so that partial sums can be added together with
+ * full fractional precision.
+ *
+ * The outputs of the first pass are scaled up by PASS1_BITS bits so that
+ * they are represented to better-than-integral precision.  These outputs
+ * require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word
+ * with the recommended scaling.  (For 12-bit sample data, the intermediate
+ * array is int32_t anyway.)
+ *
+ * To avoid overflow of the 32-bit intermediate results in pass 2, we must
+ * have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26.  Error analysis
+ * shows that the values given below are the most effective.
+ */
+
+#undef CONST_BITS
+#undef PASS1_BITS
+#undef OUT_SHIFT
+
+#if BITS_IN_JSAMPLE == 8
+#define CONST_BITS  13
+#define PASS1_BITS  4   /* set this to 2 if 16x16 multiplies are faster */
+#define OUT_SHIFT   PASS1_BITS
+#else
+#define CONST_BITS  13
+#define PASS1_BITS  1   /* lose a little precision to avoid overflow */
+#define OUT_SHIFT   (PASS1_BITS + 1)
+#endif
+
+/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus
+ * causing a lot of useless floating-point operations at run time.
+ * To get around this we use the following pre-calculated constants.
+ * If you change CONST_BITS you may want to add appropriate values.
+ * (With a reasonable C compiler, you can just rely on the FIX() macro...)
+ */
+
+#if CONST_BITS == 13
+#define FIX_0_298631336  ((int32_t)  2446)      /* FIX(0.298631336) */
+#define FIX_0_390180644  ((int32_t)  3196)      /* FIX(0.390180644) */
+#define FIX_0_541196100  ((int32_t)  4433)      /* FIX(0.541196100) */
+#define FIX_0_765366865  ((int32_t)  6270)      /* FIX(0.765366865) */
+#define FIX_0_899976223  ((int32_t)  7373)      /* FIX(0.899976223) */
+#define FIX_1_175875602  ((int32_t)  9633)      /* FIX(1.175875602) */
+#define FIX_1_501321110  ((int32_t)  12299)     /* FIX(1.501321110) */
+#define FIX_1_847759065  ((int32_t)  15137)     /* FIX(1.847759065) */
+#define FIX_1_961570560  ((int32_t)  16069)     /* FIX(1.961570560) */
+#define FIX_2_053119869  ((int32_t)  16819)     /* FIX(2.053119869) */
+#define FIX_2_562915447  ((int32_t)  20995)     /* FIX(2.562915447) */
+#define FIX_3_072711026  ((int32_t)  25172)     /* FIX(3.072711026) */
+#else
+#define FIX_0_298631336  FIX(0.298631336)
+#define FIX_0_390180644  FIX(0.390180644)
+#define FIX_0_541196100  FIX(0.541196100)
+#define FIX_0_765366865  FIX(0.765366865)
+#define FIX_0_899976223  FIX(0.899976223)
+#define FIX_1_175875602  FIX(1.175875602)
+#define FIX_1_501321110  FIX(1.501321110)
+#define FIX_1_847759065  FIX(1.847759065)
+#define FIX_1_961570560  FIX(1.961570560)
+#define FIX_2_053119869  FIX(2.053119869)
+#define FIX_2_562915447  FIX(2.562915447)
+#define FIX_3_072711026  FIX(3.072711026)
+#endif
+
+
+/* Multiply an int32_t variable by an int32_t constant to yield an int32_t result.
+ * For 8-bit samples with the recommended scaling, all the variable
+ * and constant values involved are no more than 16 bits wide, so a
+ * 16x16->32 bit multiply can be used instead of a full 32x32 multiply.
+ * For 12-bit samples, a full 32-bit multiplication will be needed.
+ */
+
+#if BITS_IN_JSAMPLE == 8 && CONST_BITS<=13 && PASS1_BITS<=2
+#define MULTIPLY(var,const)  MULTIPLY16C16(var,const)
+#else
+#define MULTIPLY(var,const)  ((var) * (const))
+#endif
+
+
+static av_always_inline void FUNC(row_fdct)(DCTELEM *data)
+{
+  int tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
+  int tmp10, tmp11, tmp12, tmp13;
+  int z1, z2, z3, z4, z5;
+  DCTELEM *dataptr;
+  int ctr;
+
+  /* Pass 1: process rows. */
+  /* Note results are scaled up by sqrt(8) compared to a true DCT; */
+  /* furthermore, we scale the results by 2**PASS1_BITS. */
+
+  dataptr = data;
+  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
+    tmp0 = dataptr[0] + dataptr[7];
+    tmp7 = dataptr[0] - dataptr[7];
+    tmp1 = dataptr[1] + dataptr[6];
+    tmp6 = dataptr[1] - dataptr[6];
+    tmp2 = dataptr[2] + dataptr[5];
+    tmp5 = dataptr[2] - dataptr[5];
+    tmp3 = dataptr[3] + dataptr[4];
+    tmp4 = dataptr[3] - dataptr[4];
+
+    /* Even part per LL&M figure 1 --- note that published figure is faulty;
+     * rotator "sqrt(2)*c1" should be "sqrt(2)*c6".
+     */
+
+    tmp10 = tmp0 + tmp3;
+    tmp13 = tmp0 - tmp3;
+    tmp11 = tmp1 + tmp2;
+    tmp12 = tmp1 - tmp2;
+
+    dataptr[0] = (DCTELEM) ((tmp10 + tmp11) << PASS1_BITS);
+    dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << PASS1_BITS);
+
+    z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100);
+    dataptr[2] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp13, FIX_0_765366865),
+                                   CONST_BITS-PASS1_BITS);
+    dataptr[6] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp12, - FIX_1_847759065),
+                                   CONST_BITS-PASS1_BITS);
+
+    /* Odd part per figure 8 --- note paper omits factor of sqrt(2).
+     * cK represents cos(K*pi/16).
+     * i0..i3 in the paper are tmp4..tmp7 here.
+     */
+
+    z1 = tmp4 + tmp7;
+    z2 = tmp5 + tmp6;
+    z3 = tmp4 + tmp6;
+    z4 = tmp5 + tmp7;
+    z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */
+
+    tmp4 = MULTIPLY(tmp4, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */
+    tmp5 = MULTIPLY(tmp5, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */
+    tmp6 = MULTIPLY(tmp6, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */
+    tmp7 = MULTIPLY(tmp7, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */
+    z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */
+    z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */
+    z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */
+    z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */
+
+    z3 += z5;
+    z4 += z5;
+
+    dataptr[7] = (DCTELEM) DESCALE(tmp4 + z1 + z3, CONST_BITS-PASS1_BITS);
+    dataptr[5] = (DCTELEM) DESCALE(tmp5 + z2 + z4, CONST_BITS-PASS1_BITS);
+    dataptr[3] = (DCTELEM) DESCALE(tmp6 + z2 + z3, CONST_BITS-PASS1_BITS);
+    dataptr[1] = (DCTELEM) DESCALE(tmp7 + z1 + z4, CONST_BITS-PASS1_BITS);
+
+    dataptr += DCTSIZE;         /* advance pointer to next row */
+  }
+}
+
+/*
+ * Perform the forward DCT on one block of samples.
+ */
+
+GLOBAL(void)
+FUNC(ff_jpeg_fdct_islow)(DCTELEM *data)
+{
+  int tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
+  int tmp10, tmp11, tmp12, tmp13;
+  int z1, z2, z3, z4, z5;
+  DCTELEM *dataptr;
+  int ctr;
+
+  FUNC(row_fdct)(data);
+
+  /* Pass 2: process columns.
+   * We remove the PASS1_BITS scaling, but leave the results scaled up
+   * by an overall factor of 8.
+   */
+
+  dataptr = data;
+  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
+    tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7];
+    tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7];
+    tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6];
+    tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6];
+    tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5];
+    tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5];
+    tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4];
+    tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4];
+
+    /* Even part per LL&M figure 1 --- note that published figure is faulty;
+     * rotator "sqrt(2)*c1" should be "sqrt(2)*c6".
+     */
+
+    tmp10 = tmp0 + tmp3;
+    tmp13 = tmp0 - tmp3;
+    tmp11 = tmp1 + tmp2;
+    tmp12 = tmp1 - tmp2;
+
+    dataptr[DCTSIZE*0] = DESCALE(tmp10 + tmp11, OUT_SHIFT);
+    dataptr[DCTSIZE*4] = DESCALE(tmp10 - tmp11, OUT_SHIFT);
+
+    z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100);
+    dataptr[DCTSIZE*2] = DESCALE(z1 + MULTIPLY(tmp13, FIX_0_765366865),
+                                 CONST_BITS + OUT_SHIFT);
+    dataptr[DCTSIZE*6] = DESCALE(z1 + MULTIPLY(tmp12, - FIX_1_847759065),
+                                 CONST_BITS + OUT_SHIFT);
+
+    /* Odd part per figure 8 --- note paper omits factor of sqrt(2).
+     * cK represents cos(K*pi/16).
+     * i0..i3 in the paper are tmp4..tmp7 here.
+     */
+
+    z1 = tmp4 + tmp7;
+    z2 = tmp5 + tmp6;
+    z3 = tmp4 + tmp6;
+    z4 = tmp5 + tmp7;
+    z5 = MULTIPLY(z3 + z4, FIX_1_175875602); /* sqrt(2) * c3 */
+
+    tmp4 = MULTIPLY(tmp4, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */
+    tmp5 = MULTIPLY(tmp5, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */
+    tmp6 = MULTIPLY(tmp6, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */
+    tmp7 = MULTIPLY(tmp7, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */
+    z1 = MULTIPLY(z1, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */
+    z2 = MULTIPLY(z2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */
+    z3 = MULTIPLY(z3, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */
+    z4 = MULTIPLY(z4, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */
+
+    z3 += z5;
+    z4 += z5;
+
+    dataptr[DCTSIZE*7] = DESCALE(tmp4 + z1 + z3, CONST_BITS + OUT_SHIFT);
+    dataptr[DCTSIZE*5] = DESCALE(tmp5 + z2 + z4, CONST_BITS + OUT_SHIFT);
+    dataptr[DCTSIZE*3] = DESCALE(tmp6 + z2 + z3, CONST_BITS + OUT_SHIFT);
+    dataptr[DCTSIZE*1] = DESCALE(tmp7 + z1 + z4, CONST_BITS + OUT_SHIFT);
+
+    dataptr++;                  /* advance pointer to next column */
+  }
+}
+
+/*
+ * The secret of DCT2-4-8 is really simple -- you do the usual 1-DCT
+ * on the rows and then, instead of doing even and odd, part on the colums
+ * you do even part two times.
+ */
+GLOBAL(void)
+FUNC(ff_fdct248_islow)(DCTELEM *data)
+{
+  int tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
+  int tmp10, tmp11, tmp12, tmp13;
+  int z1;
+  DCTELEM *dataptr;
+  int ctr;
+
+  FUNC(row_fdct)(data);
+
+  /* Pass 2: process columns.
+   * We remove the PASS1_BITS scaling, but leave the results scaled up
+   * by an overall factor of 8.
+   */
+
+  dataptr = data;
+  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
+     tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*1];
+     tmp1 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*3];
+     tmp2 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*5];
+     tmp3 = dataptr[DCTSIZE*6] + dataptr[DCTSIZE*7];
+     tmp4 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*1];
+     tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*3];
+     tmp6 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*5];
+     tmp7 = dataptr[DCTSIZE*6] - dataptr[DCTSIZE*7];
+
+     tmp10 = tmp0 + tmp3;
+     tmp11 = tmp1 + tmp2;
+     tmp12 = tmp1 - tmp2;
+     tmp13 = tmp0 - tmp3;
+
+     dataptr[DCTSIZE*0] = DESCALE(tmp10 + tmp11, OUT_SHIFT);
+     dataptr[DCTSIZE*4] = DESCALE(tmp10 - tmp11, OUT_SHIFT);
+
+     z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100);
+     dataptr[DCTSIZE*2] = DESCALE(z1 + MULTIPLY(tmp13, FIX_0_765366865),
+                                  CONST_BITS+OUT_SHIFT);
+     dataptr[DCTSIZE*6] = DESCALE(z1 + MULTIPLY(tmp12, - FIX_1_847759065),
+                                  CONST_BITS+OUT_SHIFT);
+
+     tmp10 = tmp4 + tmp7;
+     tmp11 = tmp5 + tmp6;
+     tmp12 = tmp5 - tmp6;
+     tmp13 = tmp4 - tmp7;
+
+     dataptr[DCTSIZE*1] = DESCALE(tmp10 + tmp11, OUT_SHIFT);
+     dataptr[DCTSIZE*5] = DESCALE(tmp10 - tmp11, OUT_SHIFT);
+
+     z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100);
+     dataptr[DCTSIZE*3] = DESCALE(z1 + MULTIPLY(tmp13, FIX_0_765366865),
+                                  CONST_BITS + OUT_SHIFT);
+     dataptr[DCTSIZE*7] = DESCALE(z1 + MULTIPLY(tmp12, - FIX_1_847759065),
+                                  CONST_BITS + OUT_SHIFT);
+
+     dataptr++;                 /* advance pointer to next column */
+  }
+}