1 files changed, 17 insertions, 17 deletions
diff --git a/param.ccl b/param.ccl
index 4967f9c..b978863 100644
--- a/param.ccl
+++ b/param.ccl
@@ -7,7 +7,7 @@ RESTRICTED:
 # 42 in the parameter nsurfaces, and by changing the array sizes [42] found
 # in many of the parameters below.
 
-CCTK_INT nsurfaces "Number of surfaces"
+CCTK_INT nsurfaces "Number of surfaces" STEERABLE=recover
 {
   0:42 :: ""
 } 0
@@ -32,39 +32,39 @@ CCTK_INT maxnphi "Maximum number of grid points in the phi direction"
 
 
 
-CCTK_INT ntheta[42] "Number of grid points in the theta direction" #ACCUMULATOR-BASE maxntheta
+CCTK_INT ntheta[42] "Number of grid points in the theta direction" STEERABLE=always #ACCUMULATOR-BASE maxntheta
 {
   0:* :: "must be at least 3*nghoststheta"
 } 19
 
-CCTK_INT nphi[42] "Number of grid points in the phi direction" #ACCUMULATOR-BASE maxnphi
+CCTK_INT nphi[42] "Number of grid points in the phi direction" STEERABLE=always #ACCUMULATOR-BASE maxnphi
 {
   0:* :: "must be at least 3*nghostsphi"
 } 38
 
 
 
-CCTK_INT nghoststheta[42] "Number of ghost zones in the theta direction" #ACCUMULATOR-BASE maxnghoststheta
+CCTK_INT nghoststheta[42] "Number of ghost zones in the theta direction" STEERABLE=always #ACCUMULATOR-BASE maxnghoststheta
 {
   0:* :: ""
 } 1
 
-CCTK_INT nghostsphi[42] "Number of ghost zones in the phi direction" #ACCUMULATOR-BASE maxnghostsphi
+CCTK_INT nghostsphi[42] "Number of ghost zones in the phi direction" STEERABLE=always #ACCUMULATOR-BASE maxnghostsphi
 {
   0:* :: ""
 } 1
 
 
 
-BOOLEAN symmetric_x[42] "Reflection symmetry in the x direction"
+BOOLEAN symmetric_x[42] "Reflection symmetry in the x direction" STEERABLE=always
 {
 } no
 
-BOOLEAN symmetric_y[42] "Reflection symmetry in the y direction"
+BOOLEAN symmetric_y[42] "Reflection symmetry in the y direction" STEERABLE=always
 {
 } no
 
-BOOLEAN symmetric_z[42] "Reflection symmetry in the z direction"
+BOOLEAN symmetric_z[42] "Reflection symmetry in the z direction" STEERABLE=always
 {
 } no
 
@@ -74,49 +74,49 @@ PRIVATE:
 
 # Place a surfaces at a certain location
 
-CCTK_REAL origin_x[42] "Origin for surface"
+CCTK_REAL origin_x[42] "Origin for surface" STEERABLE=always
 {
   * :: "origin"
 } 0.0
 
-CCTK_REAL origin_y[42] "Origin for surface"
+CCTK_REAL origin_y[42] "Origin for surface" STEERABLE=always
 {
   * :: "origin"
 } 0.0
 
-CCTK_REAL origin_z[42] "Origin for surface"
+CCTK_REAL origin_z[42] "Origin for surface" STEERABLE=always
 {
   * :: "origin"
 } 0.0
 
 
 
-BOOLEAN set_spherical[42] "Place surface at a certain radius"
+BOOLEAN set_spherical[42] "Place surface at a certain radius" STEERABLE=always
 {
 } no
 
-CCTK_REAL radius[42] "Radius for surface"
+CCTK_REAL radius[42] "Radius for surface" STEERABLE=always
 {
   * :: "radius"
 } 0.0
 
 
 
-BOOLEAN set_elliptic[42] "Place surface at a certain radius"
+BOOLEAN set_elliptic[42] "Place surface at a certain radius" STEERABLE=always
 {
 } no
 
-CCTK_REAL radius_x[42] "Radius for surface"
+CCTK_REAL radius_x[42] "Radius for surface" STEERABLE=always
 {
   * :: "radius"
 } 0.0
 
-CCTK_REAL radius_y[42] "Radius for surface"
+CCTK_REAL radius_y[42] "Radius for surface" STEERABLE=always
 {
   * :: "radius"
 } 0.0
 
-CCTK_REAL radius_z[42] "Radius for surface"
+CCTK_REAL radius_z[42] "Radius for surface" STEERABLE=always
 {
   * :: "radius"
 } 0.0