# Parameter definitions for thorn ADMMass
# $Header$

CCTK_INT ADMMass_number "number of measurements" STEERABLE=ALWAYS
{
  0: :: "0 or positive"
} 1

CCTK_REAL ADMMass_x_min[100] "x position of the leftmost yz-plane for the integration box" STEERABLE=ALWAYS
{
  :	:: "anything"
} -100.0
CCTK_REAL ADMMass_x_max[100] "x position of the righttmost yz-plane for the integration box" STEERABLE=ALWAYS
{
  :	:: "anything"
} 100.0

CCTK_REAL ADMMass_y_min[100] "y position of the leftmost xz-plane for the integration box" STEERABLE=ALWAYS
{
  :	:: "anything"
} -100.0
CCTK_REAL ADMMass_y_max[100] "y position of the rightmost xz-plane for the integration box" STEERABLE=ALWAYS
{
  :	:: "anything"
} 100.0

CCTK_REAL ADMMass_z_min[100] "z position of the leftmost xy-plane for the integration box" STEERABLE=ALWAYS
{
  :	:: "anything"
} -100.0
CCTK_REAL ADMMass_z_max[100] "z position of the rightmost xy-plane for the integration box" STEERABLE=ALWAYS
{
  :	:: "anything"
} 100.0

CCTK_REAL ADMMass_x_pos[100] "x position of the center of the integration box" STEERABLE=ALWAYS
{
  :	:: "anything"
} 0.0
CCTK_REAL ADMMass_y_pos[100] "y position of the center of the integration box" STEERABLE=ALWAYS
{
  :	:: "anything"
} 0.0
CCTK_REAL ADMMass_z_pos[100] "z position of the center of the integration box" STEERABLE=ALWAYS
{
  :	:: "anything"
} 0.0

CCTK_REAL ADMMass_distance_from_grid_boundary[100] "distance between the grid boundaries and the surface of the integration box" STEERABLE=ALWAYS
{
  :	:: "<=0 for disable, positive otherwise"
} -1.0

CCTK_REAL ADMMass_surface_distance[100] "distance between the above-defined center of the integration (cubic) box and its surface" STEERABLE=ALWAYS
{
  :	:: "<=0 for disable, positive otherwise"
} -1.0

CCTK_REAL ADMMass_volume_radius[100] "radius of the sphere inside which the volume integral is computed" STEERABLE=ALWAYS
{
  :	:: "<=0 for disable, positive otherwise"
} -1.0

BOOLEAN ADMMass_use_surface_distance_as_volume_radius "Use ADMMass_surface_distance instead of ADMMass_volume_radius" STEERABLE=ALWAYS
{
} "yes"

BOOLEAN ADMMass_use_all_volume_as_volume_radius "Use the whole grid for volume integration" STEERABLE=ALWAYS
{
} "no"

BOOLEAN ADMMass_Excise_Horizons "Should we exclude the region inside the AH to the volume integral" STEERABLE=ALWAYS
{
} "no"

BOOLEAN ADMMass_Debug "Enable some info at runtime" STEERABLE=ALWAYS
{
} "no"