SRC += ./lib/layer_status/layer_status.c
SRC += ./lib/logo.c

# MCU name
MCU = STM32F103

# Bootloader selection
# Cannot use `BOOTLOADER = stm32duino` due to the need to override
# `MCU_LDSCRIPT`, therefore all parameters need to be specified here manually.
OPT_DEFS += -DBOOTLOADER_STM32DUINO
MCU_LDSCRIPT = STM32F103xB_stm32duino_bootloader
BOARD = STM32_F103_STM32DUINO
BOOTLOADER_TYPE = stm32duino
DFU_ARGS = -d 1EAF:0003 -a 2 -R
DFU_SUFFIX_ARGS = -v 1EAF -p 0003

# Build Options
#   change yes to no to disable
#
BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
MOUSEKEY_ENABLE = yes       # Mouse keys
EXTRAKEY_ENABLE = yes       # Audio control and System control
CONSOLE_ENABLE = no         # Console for debug
COMMAND_ENABLE = no         # Commands for debug and configuration
NKRO_ENABLE = yes           # Enable N-Key Rollover
BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
AUDIO_ENABLE = no           # Audio output

# OLED enabled
OLED_ENABLE = yes
OLED_DRIVER = SSD1306

# RGB Matrix enabled
RGB_MATRIX_ENABLE = yes
RGB_MATRIX_DRIVER = WS2812

# Encoder enabled
ENCODER_ENABLE = yes

# Wear-levelling driver
EEPROM_DRIVER = wear_leveling
WEAR_LEVELING_DRIVER = embedded_flash