From e3a21348c3879c11072c7c42d3b4d04b022f4fe2 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Wed, 16 Oct 2019 13:11:22 -0700 Subject: [Keymap] Drashna's Hardware Features Experimentations (#6920) * Change RGBLight pin for Planck Light Move it to A0, so that the SPI? pins are available for BT hackery * Add QMK DFU bootloader info * Add Solenoid * Disable annoying white LED on bottom * Enable Solenoid on Corne * Remove bounds for animations * Increase debounce for Ergodox EZ to reduce repeat key issues * Set swap hands key to be a hold-tap key This way, it's not ANNOYING and doesn't swap the hands inteniontally * Move MT Alt in Corne keymap * Re-Add fine tuned control of secrets * Squash mods to single row * Add LRA settings to haptic feedback settings for Rev6 * Fix issue with non-Planck EZ keymaps * Add 40 Percent Nano with Analog Joystick * Add Collide39 keymap * Fix OLED printing to be more flavorful * Fix up Iris GamePad and come cleanup * Expand OLED char map further * Add modded characters to keylogger * Here be dragons Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Fix up rules for community layouts * Some more OLED tweaks * Add mod mask check function * Change QMK DFU Audio pin to be correct * Use manual STM config instead of CTPC for Collide 39 --- layouts/community/ortho_4x12/drashna/config.h | 65 +++++++++++++++++++++++++-- 1 file changed, 62 insertions(+), 3 deletions(-) (limited to 'layouts/community/ortho_4x12/drashna/config.h') diff --git a/layouts/community/ortho_4x12/drashna/config.h b/layouts/community/ortho_4x12/drashna/config.h index 9f3d2b82d6..d8ac5e6d11 100644 --- a/layouts/community/ortho_4x12/drashna/config.h +++ b/layouts/community/ortho_4x12/drashna/config.h @@ -1,7 +1,7 @@ #pragma once #if defined(RGBLIGHT_ENABLE) && !defined(RGBLED_NUM) -# define RGB_DI_PIN B3 +# define RGB_DI_PIN A0 # define RGBLED_NUM 13 // Number of LEDs # define RGBLIGHT_ANIMATIONS # define RGBLIGHT_HUE_STEP 12 @@ -17,10 +17,12 @@ #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot) // #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened) -# define RGB_MATRIX_FRAMEBUFFER_EFFECTS +# define RGB_MATRIX_FRAMEBUFFER_EFFECTS // #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects // #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 # define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended +# undef RGB_MATRIX_LED_PROCESS_LIMIT +# undef RGB_MATRIX_LED_FLUSH_LIMIT #endif #if defined(KEYBOARD_lets_split_rev2) @@ -32,7 +34,17 @@ #if !defined(KEYBOARD_planck_light) # ifdef RGBLIGHT_ENABLE # define NO_MUSIC_MODE -# endif // RGBLIGHT_ENABLE +# endif // RGBLIGHT_ENABLE +#else +# undef QMK_ESC_OUTPUT +# define QMK_ESC_OUTPUT E6 // usually COL +# undef QMK_ESC_INPUT +# define QMK_ESC_INPUT B0 // usually ROW +# undef QMK_LED +# define QMK_LED D6 +# undef QMK_SPEAKER +# define QMK_SPEAKER B5 +# define SOLENOID_PIN A1 #endif // KEYBOARD_planck_light #if defined(KEYBOARD_planck) @@ -69,3 +81,50 @@ /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 2 + +#define FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/ +#define FB_BRAKEFACTOR 6 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */ +#define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */ + +/* default 3V ERM vibration motor voltage and library*/ +#if FB_ERM_LRA == 0 +#define RATED_VOLTAGE 3 +#define V_RMS 2.3 +#define V_PEAK 3.30 +/* Library Selection */ +#define LIB_SELECTION 4 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */ + +/* default 2V LRA voltage and library */ +#elif FB_ERM_LRA == 1 +#define RATED_VOLTAGE 2 +#define V_RMS 2.0 +#define V_PEAK 2.85 +#define F_LRA 200 +/* Library Selection */ +#define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */ + +#endif + +/* Control 1 register settings */ +#define DRIVE_TIME 25 +#define AC_COUPLE 0 +#define STARTUP_BOOST 1 + +/* Control 2 Settings */ +#define BIDIR_INPUT 1 +#define BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */ +#define SAMPLE_TIME 3 +#define BLANKING_TIME 1 +#define IDISS_TIME 1 + +/* Control 3 settings */ +#define NG_THRESH 2 +#define ERM_OPEN_LOOP 1 +#define SUPPLY_COMP_DIS 0 +#define DATA_FORMAT_RTO 0 +#define LRA_DRIVE_MODE 0 +#define N_PWM_ANALOG 0 +#define LRA_OPEN_LOOP 0 +/* Control 4 settings */ +#define ZC_DET_TIME 0 +#define AUTO_CAL_TIME 3 -- cgit v1.2.3