From b2a186cf92d91bbb7f98fff68c4edf571909bf89 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Thu, 7 Oct 2021 10:57:48 +1100 Subject: Purge uGFX. (#14720) * Purge uGFX. * Remove remnants of visualizer. * Remove remnants of uGFX. --- keyboards/ergodox_infinity/board_st7565.h | 96 ------------------------------- 1 file changed, 96 deletions(-) delete mode 100644 keyboards/ergodox_infinity/board_st7565.h (limited to 'keyboards/ergodox_infinity/board_st7565.h') diff --git a/keyboards/ergodox_infinity/board_st7565.h b/keyboards/ergodox_infinity/board_st7565.h deleted file mode 100644 index 875ed9e65c..0000000000 --- a/keyboards/ergodox_infinity/board_st7565.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#ifndef _GDISP_LLD_BOARD_H -#define _GDISP_LLD_BOARD_H - -#include "quantum.h" - -#define ST7565_LCD_BIAS ST7565_LCD_BIAS_7 -#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC -#define ST7565_PAGE_ORDER 0, 1, 2, 3 -/* - * Custom page order for several LCD boards, e.g. HEM12864-99 - * #define ST7565_PAGE_ORDER 4,5,6,7,0,1,2,3 - */ - -#define ST7565_A0_PIN C7 -#define ST7565_RST_PIN C8 -#define ST7565_MOSI_PIN C6 -#define ST7565_SCLK_PIN C5 -#define ST7565_SS_PIN C4 - -// DSPI Clock and Transfer Attributes -// Frame Size: 8 bits -// MSB First -// CLK Low by default -static const SPIConfig spi1config = { - // Operation complete callback or @p NULL. - .end_cb = NULL, - // The chip select line port - when not using pcs. - .ssport = PAL_PORT(ST7565_SS_PIN), - // brief The chip select line pad number - when not using pcs. - .sspad = PAL_PAD(ST7565_SS_PIN), - // SPI initialization data. - .tar0 = SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes - | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns - | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns - | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns - | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2 - | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns -}; - -static GFXINLINE void acquire_bus(GDisplay *g) { - (void)g; - // Only the LCD is using the SPI bus, so no need to acquire - // spiAcquireBus(&SPID1); - spiSelect(&SPID1); -} - -static GFXINLINE void release_bus(GDisplay *g) { - (void)g; - // Only the LCD is using the SPI bus, so no need to release - // spiReleaseBus(&SPID1); - spiUnselect(&SPID1); -} - -static GFXINLINE void init_board(GDisplay *g) { - (void)g; - setPinOutput(ST7565_A0_PIN); - writePinHigh(ST7565_A0_PIN); - setPinOutput(ST7565_RST_PIN); - writePinHigh(ST7565_RST_PIN); - setPinOutput(ST7565_SS_PIN); - - palSetPadMode(PAL_PORT(ST7565_MOSI_PIN), PAL_PAD(ST7565_MOSI_PIN), PAL_MODE_ALTERNATIVE_2); - palSetPadMode(PAL_PORT(ST7565_SCLK_PIN), PAL_PAD(ST7565_SCLK_PIN), PAL_MODE_ALTERNATIVE_2); - - spiInit(); - spiStart(&SPID1, &spi1config); - release_bus(g); -} - -static GFXINLINE void post_init_board(GDisplay *g) { (void)g; } - -static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) { - (void)g; - writePin(ST7565_RST_PIN, !state); -} - -static GFXINLINE void write_cmd(GDisplay *g, gU8 cmd) { - (void)g; - writePinLow(ST7565_A0_PIN); - spiSend(&SPID1, 1, &cmd); -} - -static GFXINLINE void write_data(GDisplay *g, gU8 *data, gU16 length) { - (void)g; - writePinHigh(ST7565_A0_PIN); - spiSend(&SPID1, length, data); -} - -#endif /* _GDISP_LLD_BOARD_H */ -- cgit v1.2.3