From 6b74dd6de5359da18e87b2d4894e3ffc3fc89d47 Mon Sep 17 00:00:00 2001 From: skullY Date: Sat, 26 Jan 2019 21:25:59 -0800 Subject: led_matrix works now --- drivers/arm/i2c_master.c | 11 ++++++----- drivers/arm/i2c_master.h | 10 ++++++++++ drivers/issi/is31fl3731-simple.c | 5 ----- 3 files changed, 16 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/arm/i2c_master.c b/drivers/arm/i2c_master.c index 385bd97cb8..1c3da2a1a2 100644 --- a/drivers/arm/i2c_master.c +++ b/drivers/arm/i2c_master.c @@ -46,13 +46,13 @@ __attribute__ ((weak)) void i2c_init(void) { // Try releasing special pins for a short time - palSetPadMode(GPIOB, 6, PAL_MODE_INPUT); - palSetPadMode(GPIOB, 7, PAL_MODE_INPUT); + palSetPadMode(I2C1_BANK, I2C1_SCL, PAL_MODE_INPUT); + palSetPadMode(I2C1_BANK, I2C1_SDA, PAL_MODE_INPUT); chThdSleepMilliseconds(10); - - palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN); - palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN); + + palSetPadMode(I2C1_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN); + palSetPadMode(I2C1_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN); //i2cInit(); //This is invoked by halInit() so no need to redo it. } @@ -67,6 +67,7 @@ uint8_t i2c_start(uint8_t address) uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) { + // FIXME: Next steps: Add a print here, copy this file to your rgb_matrix firmware. Compare both. i2c_address = address; i2cStart(&I2C_DRIVER, &i2cconfig); return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout)); diff --git a/drivers/arm/i2c_master.h b/drivers/arm/i2c_master.h index 392760328f..7a9eb32eb9 100644 --- a/drivers/arm/i2c_master.h +++ b/drivers/arm/i2c_master.h @@ -26,6 +26,16 @@ #include "ch.h" #include +#ifndef I2C1_BANK + #define I2C1_BANK GPIOB +#endif +#ifndef I2C1_SCL + #define I2C1_SCL 6 +#endif +#ifndef I2C1_SDA + #define I2C1_SDA 7 +#endif + #ifndef I2C_DRIVER #define I2C_DRIVER I2CD1 #endif diff --git a/drivers/issi/is31fl3731-simple.c b/drivers/issi/is31fl3731-simple.c index 9c31df2092..ff6620b72f 100644 --- a/drivers/issi/is31fl3731-simple.c +++ b/drivers/issi/is31fl3731-simple.c @@ -158,12 +158,7 @@ void IS31FL3731_init(uint8_t addr) { // enable software shutdown IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00); // this delay was copied from other drivers, might not be needed - // FIXME: Don't we have a wrapper for this already? - #ifdef __AVR__ - _delay_ms(10); - #else wait_ms(10); - #endif // picture mode IS31FL3731_write_register(addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE); -- cgit v1.2.3