From 4a0aa9ada2837762e3b4eab73950962365341cce Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Wed, 30 Nov 2022 02:45:51 +0000 Subject: Fix headers in info.json reference (#19202) --- docs/reference_info_json.md | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'docs') diff --git a/docs/reference_info_json.md b/docs/reference_info_json.md index a96d9d4b6f..d5469c835a 100644 --- a/docs/reference_info_json.md +++ b/docs/reference_info_json.md @@ -39,7 +39,7 @@ The `info.json` file is a JSON formatted dictionary. The first six keys noted he ?> For all the available keys and their allowed values refer back to the [`data/schemas/keyboard.jsonschema`](https://github.com/qmk/qmk_firmware/blob/master/data/schemas/keyboard.jsonschema) file. -### Layout Format +## Layout Format Within our `info.json` file the `layouts` portion of the dictionary contains several nested dictionaries. The outer layer consists of QMK layout macros, for example `LAYOUT_ansi` or `LAYOUT_iso`. @@ -68,11 +68,11 @@ All key positions and rotations are specified in relation to the top-left corner * A two item list describing the row and column location for this key. * Example: `[0, 4]` -### Matrix Pins +## Matrix Pins Currently QMK supports connecting switches either directly to GPIO pins or via a switch matrix. At this time you can not combine these, they are mutually exclusive. -#### Switch Matrix +### Switch Matrix Most keyboards use a switch matrix to connect keyswitches to the MCU. You can define your pin columns and rows to configure your switch matrix. When defining switch matrices you should also define your `diode_direction`. @@ -88,7 +88,7 @@ Example: } ``` -#### Direct Pins +### Direct Pins Direct pins are when you connect one side of the switch to GND and the other side to a GPIO pin on your MCU. No diode is required, but there is a 1:1 mapping between switches and pins. @@ -250,7 +250,7 @@ The following animations can be enabled: |`static_gradient`|Enable static gradient mode. | |`twinkle` |Enable twinkle animation mode. | -### USB +## USB Every USB keyboard needs to have its USB parameters defined. At a minimum you need to set the Vendor ID, Product ID, and device version. @@ -268,7 +268,7 @@ Example: The device version is a BCD (binary coded decimal) value, in the format `MMmr`, so the below value would look like `0x0100` in the generated code. This also means the maximum valid values for each part are `99.9.9`, despite it being a hexadecimal value under the hood. -### Encoders +## Encoders This section controls the basic [rotary encoder](feature_encoders.md) support. @@ -312,7 +312,7 @@ Examples: } ``` -### Secure +## Secure The following options can be configured: -- cgit v1.2.3