diff options
Diffstat (limited to 'lib/lufa/LUFA/Drivers/USB/Core/USBMode.h')
| -rw-r--r-- | lib/lufa/LUFA/Drivers/USB/Core/USBMode.h | 283 |
1 files changed, 283 insertions, 0 deletions
diff --git a/lib/lufa/LUFA/Drivers/USB/Core/USBMode.h b/lib/lufa/LUFA/Drivers/USB/Core/USBMode.h new file mode 100644 index 0000000000..2044f899a9 --- /dev/null +++ b/lib/lufa/LUFA/Drivers/USB/Core/USBMode.h @@ -0,0 +1,283 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB mode and feature support definitions. + * \copydetails Group_USBMode + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_USB + * \defgroup Group_USBMode USB Mode Tokens + * \brief USB mode and feature support definitions. + * + * This file defines macros indicating the type of USB controller the library is being compiled for, and its + * capabilities. These macros may then be referenced in the user application to selectively enable or disable + * code sections depending on if they are defined or not. + * + * After the inclusion of the master USB driver header, one or more of the following tokens may be defined, to + * allow the user code to conditionally enable or disable code based on the USB controller family and allowable + * USB modes. These tokens may be tested against to eliminate code relating to a USB mode which is not enabled for + * the given compilation. + * + * @{ + */ + +#ifndef __USBMODE_H__ +#define __USBMODE_H__ + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Includes: */ + #include "../../../Common/Common.h" + + /* Public Interface - May be used in end-application: */ + #if defined(__DOXYGEN__) + /** Indicates that the target AVR microcontroller belongs to the Series 2 AVR8 USB controller + * (i.e. AT90USBxxx2 or ATMEGAxxU2) when defined. + */ + #define USB_SERIES_2_AVR + + /** Indicates that the target AVR microcontroller belongs to the Series 4 AVR8 USB controller + * (i.e. ATMEGAxxU4) when defined. + */ + #define USB_SERIES_4_AVR + + /** Indicates that the target AVR microcontroller belongs to the Series 6 AVR8 USB controller + * (i.e. AT90USBxxx6) when defined. + */ + #define USB_SERIES_6_AVR + + /** Indicates that the target AVR microcontroller belongs to the Series 7 AVR8 USB controller + * (i.e. AT90USBxxx7) when defined. + */ + #define USB_SERIES_7_AVR + + /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A0 Series USB controller + * (i.e. AT32UC3A0*) when defined. + */ + #define USB_SERIES_UC3A0_AVR + + /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A1 Series USB controller + * (i.e. AT32UC3A1*) when defined. + */ + #define USB_SERIES_UC3A1_AVR + + /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A3 Series USB controller + * (i.e. AT32UC3A3*) when defined. + */ + #define USB_SERIES_UC3A3_AVR + + /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A4 Series USB controller + * (i.e. AT32UC3A4*) when defined. + */ + #define USB_SERIES_UC3A4_AVR + + /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3B0 Series USB controller + * (i.e. AT32UC3B0*) when defined. + */ + #define USB_SERIES_UC3B0_AVR + + /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3B1 Series USB controller + * (i.e. AT32UC3B1*) when defined. + */ + #define USB_SERIES_UC3B1_AVR + + /** Indicates that the target AVR microcontroller belongs to the XMEGA A1U Series USB controller + * (i.e. ATXMEGA*A1U) when defined. + */ + #define USB_SERIES_A1U_XMEGA + + /** Indicates that the target AVR microcontroller belongs to the XMEGA A3U Series USB controller + * (i.e. ATXMEGA*A3U) when defined. + */ + #define USB_SERIES_A3U_XMEGA + + /** Indicates that the target AVR microcontroller belongs to the XMEGA A4U Series USB controller + * (i.e. ATXMEGA*A4U) when defined. + */ + #define USB_SERIES_A4U_XMEGA + + /** Indicates that the target AVR microcontroller belongs to the XMEGA B1 Series USB controller + * (i.e. ATXMEGA*B1) when defined. + */ + #define USB_SERIES_B1_XMEGA + + /** Indicates that the target AVR microcontroller belongs to the XMEGA B3 Series USB controller + * (i.e. ATXMEGA*B3) when defined. + */ + #define USB_SERIES_B3_XMEGA + + /** Indicates that the target AVR microcontroller belongs to the XMEGA C3 Series USB controller + * (i.e. ATXMEGA*C3) when defined. + */ + #define USB_SERIES_C3_XMEGA + + /** Indicates that the target AVR microcontroller belongs to the XMEGA C4 Series USB controller + * (i.e. ATXMEGA*C4) when defined. + */ + #define USB_SERIES_C4_XMEGA + + /** Indicates that the target microcontroller and compilation settings allow for the + * target to be configured in USB Device mode when defined. + */ + #define USB_CAN_BE_DEVICE + + /** Indicates that the target microcontroller and compilation settings allow for the + * target to be configured in USB Host mode when defined. + */ + #define USB_CAN_BE_HOST + + /** Indicates that the target microcontroller and compilation settings allow for the + * target to be configured in either USB Device or Host mode when defined. + */ + #define USB_CAN_BE_BOTH + #else + /* Macros: */ + #if (defined(__AVR_AT90USB162__) || defined(__AVR_AT90USB82__) || \ + defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega8U2__)) + #define USB_SERIES_2_AVR + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega16U4__)) + #define USB_SERIES_4_AVR + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)) + #define USB_SERIES_6_AVR + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__)) + #define USB_SERIES_7_AVR + #define USB_CAN_BE_DEVICE + #define USB_CAN_BE_HOST + #elif (defined(__AVR32_UC3A0512__) || defined(__AVR32_UC3A0256__) || \ + defined(__AVR32_UC3A0128__) || defined(__AVR32_UC3A064__)) + #define USB_SERIES_UC3A0_AVR32 + #define USB_CAN_BE_DEVICE + #define USB_CAN_BE_HOST + #elif (defined(__AVR32_UC3A1512__) || defined(__AVR32_UC3A1256__) || \ + defined(__AVR32_UC3A1128__) || defined(__AVR32_UC3A164__)) + #define USB_SERIES_UC3A1_AVR32 + #define USB_CAN_BE_DEVICE + #define USB_CAN_BE_HOST + #elif (defined(__AVR32_UC3A3256__) || defined(__AVR32_UC3A3256S__) || \ + defined(__AVR32_UC3A3128__) || defined(__AVR32_UC3A3128S__) || \ + defined(__AVR32_UC3A364__) || defined(__AVR32_UC3A364S__)) + #define USB_SERIES_UC3A3_AVR32 + #define USB_CAN_BE_DEVICE + #define USB_CAN_BE_HOST + #elif (defined(__AVR32_UC3A4256__) || defined(__AVR32_UC3A4256S__) || \ + defined(__AVR32_UC3A4128__) || defined(__AVR32_UC3A4128S__) || \ + defined(__AVR32_UC3A464__) || defined(__AVR32_UC3A464S__)) + #define USB_SERIES_UC3A4_AVR32 + #define USB_CAN_BE_DEVICE + #define USB_CAN_BE_HOST + #elif (defined(__AVR32_UC3B0512__) || defined(__AVR32_UC3B0256__) || \ + defined(__AVR32_UC3B0128__) || defined(__AVR32_UC3B064__)) + #define USB_SERIES_UC3B0_AVR32 + #define USB_CAN_BE_DEVICE + #define USB_CAN_BE_HOST + #elif (defined(__AVR32_UC3B1512__) || defined(__AVR32_UC3B1256__) || \ + defined(__AVR32_UC3B1128__) || defined(__AVR32_UC3B164__)) + #define USB_SERIES_UC3B1_AVR32 + #define USB_CAN_BE_DEVICE + #define USB_CAN_BE_HOST + #elif (defined(__AVR_ATxmega128A1U__) || defined(__AVR_ATxmega64A1U__)) + #define USB_SERIES_A1U_XMEGA + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATxmega64A3U__) || defined(__AVR_ATxmega128A3U__) || \ + defined(__AVR_ATxmega192A3U__) || defined(__AVR_ATxmega256A3U__)) + #define USB_SERIES_A3U_XMEGA + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATxmega256A3BU__)) + #define USB_SERIES_A3BU_XMEGA + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATxmega16A4U__) || defined(__AVR_ATxmega32A4U__) || \ + defined(__AVR_ATxmega64A4U__) || defined(__AVR_ATxmega128A4U__)) + #define USB_SERIES_A4U_XMEGA + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATxmega128B1__) || defined(__AVR_ATxmega64B1__)) + #define USB_SERIES_B1_XMEGA + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATxmega128B3__) || defined(__AVR_ATxmega64B3__)) + #define USB_SERIES_B3_XMEGA + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATxmega128C3__) || defined(__AVR_ATxmega64C3__) || \ + defined(__AVR_ATxmega192C3__) || defined(__AVR_ATxmega256C3__) || \ + defined(__AVR_ATxmega384C3__)) + #define USB_SERIES_C3_XMEGA + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATxmega16C4__) || defined(__AVR_ATxmega32C4__)) + #define USB_SERIES_C4_XMEGA + #define USB_CAN_BE_DEVICE + #endif + + #if (defined(USB_HOST_ONLY) && defined(USB_DEVICE_ONLY)) + #error USB_HOST_ONLY and USB_DEVICE_ONLY are mutually exclusive. + #elif defined(USB_HOST_ONLY) + #if !defined(USB_CAN_BE_HOST) + #error USB_HOST_ONLY is not available for the currently selected microcontroller model. + #else + #undef USB_CAN_BE_DEVICE + #endif + #elif defined(USB_DEVICE_ONLY) + #if !defined(USB_CAN_BE_DEVICE) + #error USB_DEVICE_ONLY is not available for the currently selected microcontroller model. + #else + #undef USB_CAN_BE_HOST + #endif + #endif + + #if (defined(USB_CAN_BE_DEVICE) && defined(USB_CAN_BE_HOST)) + #define USB_CAN_BE_BOTH + #endif + + #if (!defined(USB_CAN_BE_DEVICE) && !defined(USB_CAN_BE_HOST)) + #error The currently selected device, USB mode or architecture is not supported. + #endif + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + |