summaryrefslogtreecommitdiff
path: root/keyboards/senselessclay/ck60
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/senselessclay/ck60')
-rw-r--r--keyboards/senselessclay/ck60/ck60.c30
-rw-r--r--keyboards/senselessclay/ck60/config.h111
-rw-r--r--keyboards/senselessclay/ck60/rules.mk9
3 files changed, 70 insertions, 80 deletions
diff --git a/keyboards/senselessclay/ck60/ck60.c b/keyboards/senselessclay/ck60/ck60.c
index a2fe38aac7..1c30b77185 100644
--- a/keyboards/senselessclay/ck60/ck60.c
+++ b/keyboards/senselessclay/ck60/ck60.c
@@ -1,4 +1,4 @@
-/* Copyright 2020 Hadi Iskandarani
+/* Copyright 2022 kb-elmo<mail@elmo.space>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -14,4 +14,30 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include "ck60.h" \ No newline at end of file
+#include "ck60.h"
+
+#define __ NO_LED
+
+#ifdef RGB_MATRIX_ENABLE
+led_config_t g_led_config = { {
+ //Key Matrix to LED Index
+ { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 },
+ { 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, 15, 14 },
+ { 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, __ },
+ { 53, 52, 51, 50, 49, 48, 47, 46, 45, 44, 43, 42, 41, __ },
+ { 54, 55, 56, __, __, __, 57, __, __, __, 58, 59, 60, 61 }
+}, {
+ //LED Index to Physical Positon
+ { 0, 0 }, { 17, 0 }, { 34, 0 }, { 52, 0 }, { 69, 0 }, { 86, 0 }, { 103, 0 }, { 121, 0 }, { 138, 0 }, { 155, 0 }, { 172, 0 }, { 190, 0 }, { 207, 0 }, { 215, 0 },
+ { 224, 24 }, { 215, 16 }, { 198, 16 }, { 180, 16 }, { 164, 16 }, { 146, 16 }, { 129, 16 }, { 112, 16 }, { 95, 16 }, { 78, 16 }, { 60, 16 }, { 43, 16 }, { 26 , 16 }, { 0, 16 },
+ { 0, 32 }, { 30, 32 }, { 47, 32 }, { 65, 32 }, { 81, 32 }, { 99, 32 }, { 116, 32 }, { 133, 32 }, { 150, 32 }, { 168, 32 }, { 185, 32 }, { 202, 32 }, { 220, 32 },
+ { 207, 48 }, { 190, 48 }, { 172, 48 }, { 155, 48 }, { 138, 48 }, { 121, 48 }, { 103, 48 }, { 86, 48 }, { 69, 48 }, { 52, 48 }, { 34, 48 }, { 17, 48 }, { 0, 48 },
+ { 0, 64 }, { 17, 64 }, { 34, 64 }, { 103, 64 }, { 172, 64 }, { 190, 64 }, { 207, 64 }, { 224, 64 }
+}, {
+ 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+ 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+ 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+ 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+ 1, 1, 1, 4, 1, 1, 1, 1
+} };
+#endif
diff --git a/keyboards/senselessclay/ck60/config.h b/keyboards/senselessclay/ck60/config.h
index 7e4a493701..f826ad9ad7 100644
--- a/keyboards/senselessclay/ck60/config.h
+++ b/keyboards/senselessclay/ck60/config.h
@@ -30,90 +30,51 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROWS 5
#define MATRIX_COLS 14
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
-/* rev0 */
+/* Keyboard Matrix Assignments */
#define MATRIX_ROW_PINS { B3, B2, F1, F4, F5 }
#define MATRIX_COL_PINS { F0, D5, D3, D2, D1, D0, C7, C6, B6, B5, B4, D7, D6, D4 }
-//#define UNUSED_PINS { B0, B7, E6 }
-
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+/* Debounce reduces chatter */
#define DEBOUNCE 5
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
+/* RGB matrix lighting */
+#define RGB_DI_PIN B1
+#define DRIVER_LED_TOTAL 62
+#define RGB_MATRIX_KEYPRESSES
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 160 // limit brightness to not overamp the USB
+#define RGB_MATRIX_LED_FLUSH_LIMIT 16 // 16 is equivalent to limiting to 60fps
+#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
+#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
+#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+
+// RGB Matrix Animation modes. Explicitly enabled
+// For full list of effects, see:
+// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
+# define ENABLE_RGB_MATRIX_ALPHAS_MODS
+# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
+# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
+# define ENABLE_RGB_MATRIX_BREATHING
+# define ENABLE_RGB_MATRIX_BAND_VAL
+# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
+# define ENABLE_RGB_MATRIX_CYCLE_ALL
+# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
+# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
+# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+# define ENABLE_RGB_MATRIX_RAINDROPS
+// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
+# define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+# define ENABLE_RGB_MATRIX_MULTISPLASH
+# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
/* disable these deprecated features by default */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0
-
-/* RGB Backlighting */
-#define RGB_DI_PIN B1
-#define RGBLED_NUM 62
-#define RGBLIGHT_ANIMATIONS
-#define RGBLIGHT_LIMIT_VAL 128
-#define RGBLIGHT_SLEEP
-#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL+5 \ No newline at end of file
diff --git a/keyboards/senselessclay/ck60/rules.mk b/keyboards/senselessclay/ck60/rules.mk
index 6b490bdd04..56aec94425 100644
--- a/keyboards/senselessclay/ck60/rules.mk
+++ b/keyboards/senselessclay/ck60/rules.mk
@@ -8,11 +8,14 @@ BOOTLOADER = atmel-dfu
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no # Mouse keys
+MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Enable N-Key Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
-AUDIO_ENABLE = no # Audio output \ No newline at end of file
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+AUDIO_ENABLE = no # Audio output
+
+RGB_MATRIX_ENABLE = yes # RGB matrix lighting
+RGB_MATRIX_DRIVER = WS2812 \ No newline at end of file