summaryrefslogtreecommitdiff
path: root/keyboards/mechwild/puckbuddy/config.h
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/mechwild/puckbuddy/config.h')
-rw-r--r--keyboards/mechwild/puckbuddy/config.h159
1 files changed, 159 insertions, 0 deletions
diff --git a/keyboards/mechwild/puckbuddy/config.h b/keyboards/mechwild/puckbuddy/config.h
new file mode 100644
index 0000000000..fac68071bb
--- /dev/null
+++ b/keyboards/mechwild/puckbuddy/config.h
@@ -0,0 +1,159 @@
+// Copyright 2022 Kyle McCreery (@kylemccreery)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0x6D77 // mw = "MechWild"
+#define PRODUCT_ID 0x170F
+#define DEVICE_VER 0x0100
+#define MANUFACTURER MechWild
+#define PRODUCT PuckBuddy
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 4
+
+#ifdef UF2_BUILD
+#define EXTERNAL_EEPROM_BYTE_COUNT 2048
+#define EXTERNAL_EEPROM_PAGE_SIZE 128
+#define EXTERNAL_EEPROM_ADDRESS_SIZE 1
+#define EXTERNAL_EEPROM_WRITE_TIME 0
+#define FEE_PAGE_BASE_ADDRESS 0x08008000
+#endif
+
+/* Define custom font */
+#define OLED_FONT_H "keyboards/mechwild/puckbuddy/glcdfont.c"
+
+/* allows the "key" button on the blackpill to toggle caps lock for user testing before soldering */
+#define DIP_SWITCH_PINS { A0 }
+
+/* status light pins using the on board LED for the blackpill */
+#define LED_CAPS_LOCK_PIN C13
+#define LED_PIN_ON_STATE 0
+
+/* set the tapping term for glidepoint pad to register a tap click */
+//#define CIRQUE_PINNACLE_TAPPING_TERM 0 // This is set to 0 to disable it
+
+/* TAPPING_TERM value is used for the CIRQUE_PINNACLE_TAPPING_TERM as well by default
+ * defining it this way allows us to easily modify it with DYNAMIC_TAPPING_TERM_ENABLE
+ */
+#define TAPPING_TERM 0
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B12, B13, B14, B15 }
+#define MATRIX_COL_PINS { B10, A8, B4, B5 }
+#define UNUSED_PINS
+
+/* spi config */
+#define SPI_DRIVER SPID1
+#define SPI_SCK_PIN A5
+#define SPI_SCK_PAL_MODE 5
+#define SPI_MOSI_PIN A7
+#define SPI_MOSI_PAL_MODE 5
+#define SPI_MISO_PIN A6
+#define SPI_MISO_PAL_MODE 5
+#define CIRQUE_PINNACLE_SPI_DIVISOR 8
+#define CIRQUE_PINNACLE_SPI_CS_PIN A4
+
+/* encoder pins */
+#define ENCODERS_PAD_A { B1, B3 }
+#define ENCODERS_PAD_B { B0, A15 }
+
+/* encoder resolution */
+#define ENCODER_RESOLUTION 4
+#define TAP_CODE_DELAY 10
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* RGB settings, uncomment this define to enable RGB */
+#define RGB_DI_PIN A3
+#ifdef RGB_DI_PIN
+# define RGBLED_NUM 3
+# define RGBLIGHT_HUE_STEP 8
+# define RGBLIGHT_SAT_STEP 8
+# define RGBLIGHT_VAL_STEP 8
+# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+# define RGBLIGHT_EFFECT_BREATHING
+# define RGBLIGHT_EFFECT_RAINBOW_MOOD
+# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+# define RGBLIGHT_EFFECT_SNAKE
+# define RGBLIGHT_EFFECT_KNIGHT
+# define RGBLIGHT_EFFECT_CHRISTMAS
+# define RGBLIGHT_EFFECT_STATIC_GRADIENT
+# define RGBLIGHT_EFFECT_RGB_TEST
+# define RGBLIGHT_EFFECT_ALTERNATING
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
+//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0