4 files changed, 5 insertions, 104 deletions
diff --git a/keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.c b/keyboards/handwired/dactyl_manuform/4x5/4x5.c
index 17caecb4fd..78c0fee819 100644
--- a/keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.c
+++ b/keyboards/handwired/dactyl_manuform/4x5/4x5.c
@@ -1,4 +1,4 @@
-#include "dactyl_manuform.h"
+#include "4x5.h"
 
 
 #ifdef SSD1306OLED
diff --git a/keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.h b/keyboards/handwired/dactyl_manuform/4x5/4x5.h
index 7e126d3017..b34d97adbf 100644
--- a/keyboards/handwired/dactyl_manuform/4x5/dactyl_manuform.h
+++ b/keyboards/handwired/dactyl_manuform/4x5/4x5.h
@@ -1,5 +1,4 @@
-#ifndef REV2_H
-#define REV2_H
+#pragma once
 
 #include "dactyl_manuform.h"
 
@@ -68,4 +67,4 @@
 \
 	}
 #endif
-#endif
+
diff --git a/keyboards/handwired/dactyl_manuform/4x5/config.h b/keyboards/handwired/dactyl_manuform/4x5/config.h
index 8917630e4a..c8417a2f0f 100644
--- a/keyboards/handwired/dactyl_manuform/4x5/config.h
+++ b/keyboards/handwired/dactyl_manuform/4x5/config.h
@@ -16,8 +16,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
-#define CONFIG_H
+#pragma once
 
 #include "config_common.h"
 
@@ -26,7 +25,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PRODUCT_ID      0x3060
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    tshort
-#define PRODUCT         Dactyl-Manuform
 #define DESCRIPTION     A split keyboard for the cheap makers
 
 /* key matrix size */
@@ -45,53 +43,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* number of backlight levels */
 // #define BACKLIGHT_LEVELS 3
 
-/* mouse config */
-#define MOUSEKEY_INTERVAL       20
-#define MOUSEKEY_DELAY          0
-#define MOUSEKEY_TIME_TO_MAX    60
-#define MOUSEKEY_MAX_SPEED      7
-#define MOUSEKEY_WHEEL_DELAY 0
 
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* Enables This makes it easier for fast typists to use dual-function keys */
-#define PERMISSIVE_HOLD
-
-/* ws2812 RGB LED */
-#define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
-#define RGBLED_NUM 12    // Number of LEDs
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-// #define NO_DEBUG
-
-/* disable print */
-// #define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-
-#endif
diff --git a/keyboards/handwired/dactyl_manuform/4x5/rules.mk b/keyboards/handwired/dactyl_manuform/4x5/rules.mk
index 99ac2880d5..14b6e1e4e3 100644
--- a/keyboards/handwired/dactyl_manuform/4x5/rules.mk
+++ b/keyboards/handwired/dactyl_manuform/4x5/rules.mk
@@ -1,47 +1,3 @@
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Bootloader
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded 
-#     automatically (+60). See bootloader.mk for all options.
-BOOTLOADER = caterina
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
 # Build Options
 #   change to "no" to disable the options, or define them in the Makefile in
@@ -59,10 +15,7 @@ AUDIO_ENABLE = no           # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-SUBPROJECT_rev1 = yes
-USE_I2C = yes
+
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
-SPLIT_KEYBOARD = yes
-