1 files changed, 118 insertions, 0 deletions
diff --git a/keyboards/bastardkb/charybdis/3x5/keymaps/via/config.h b/keyboards/bastardkb/charybdis/3x5/keymaps/via/config.h
new file mode 100644
index 0000000000..f515d85334
--- /dev/null
+++ b/keyboards/bastardkb/charybdis/3x5/keymaps/via/config.h
@@ -0,0 +1,118 @@
+/**
+ * Copyright 2021 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#ifdef VIA_ENABLE
+/* VIA configuration. */
+#    define DYNAMIC_KEYMAP_LAYER_COUNT 7
+#endif  // VIA_ENABLE
+
+/* Disable unused features. */
+#define NO_ACTION_ONESHOT
+
+#ifndef TAPPING_TERM
+/**
+ * \brief Configure the global tapping term (default: 200ms).
+ *
+ * If you have a lot of accidental mod activations, crank up the tapping term.
+ *
+ * See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-term
+ */
+#    define TAPPING_TERM 200
+#endif  // TAPPING_TERM
+
+/**
+ * \brief Enable rapid switch from tap to hold.
+ *
+ * Note that a side-effect of this setting is to disable auto-repeat when
+ * pressing key twice, except for one-shot keys.
+ *
+ * See docs.qmk.fm/using-qmk/software-features/tap_hold#tapping-force-hold
+ */
+#define TAPPING_FORCE_HOLD
+
+/*
+ * Tap-or-Hold decision modes.
+ *
+ * Note that the following flags behave differently when combined (ie. when 2 or
+ * more are enabled).
+ *
+ * See bit.ly/tap-or-hold for a visual explanation of the following tap-or-hold
+ * decision modes.
+ */
+
+/**
+ * \brief Faster tap-hold trigger.
+ *
+ * Without `PERMISSIVE_HOLD`, within `TAPPING_TERM`:
+ *   Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 ➞ ae
+ * With `PERMISSIVE_HOLD`, within `TAPPING_TERM`:
+ *   Mod(a)🠗 e🠗 e🠕 Mod(a)🠕 ➞ Mod+e
+ *
+ * See docs.qmk.fm/using-qmk/software-features/tap_hold#permissive-hold
+ */
+#define PERMISSIVE_HOLD
+
+/**
+ * \brief Prevent normal rollover on alphas from accidentally triggering mods.
+ *
+ * Ignores key presses that interrupt a mod-tap.  Must-have for Home Row mod.
+ *
+ * Without `IGNORE_MOD_TAP_INTERRUPT`, within `TAPPING_TERM`:
+ *   Mod(a)🠗 e🠗 Mod(a)🠕 e🠕 ➞ Mod+e
+ * With `IGNORE_MOD_TAP_INTERRUPT`, within `TAPPING_TERM`:
+ *   Mod(a)🠗 e🠗 Mod(a)🠕 e🠕 ➞ ae
+ *
+ * See docs.qmk.fm/using-qmk/software-features/tap_hold#ignore-mod-tap-interrupt
+ */
+#define IGNORE_MOD_TAP_INTERRUPT
+
+/* Charybdis-specific features. */
+
+#ifdef POINTING_DEVICE_ENABLE
+// Enable pointer acceleration, which increases the speed by ~2x for large
+// displacement, while maintaining 1x speed for slow movements.  See also:
+// - `CHARYBDIS_POINTER_ACCELERATION_FACTOR`
+#    define CHARYBDIS_POINTER_ACCELERATION_ENABLE
+
+// Automatically enable the pointer layer when moving the trackball.  See also:
+// - `CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_TIMEOUT_MS`
+// - `CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_THRESHOLD`
+// #define CHARYBDIS_AUTO_POINTER_LAYER_TRIGGER_ENABLE
+#endif  // POINTING_DEVICE_ENABLE
+
+/* RGB Matrix. */
+
+#ifdef RGB_MATRIX_ENABLE
+// Limit maximum brightness to keep power consumption reasonable, and avoid
+// disconnects.
+#    undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 64
+
+// Rainbow swirl as startup mode.
+#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
+
+// Slow swirl at startup.
+#    define RGB_MATRIX_STARTUP_SPD 32
+
+// Startup values.
+#    define RGB_MATRIX_STARTUP_HUE 0
+#    define RGB_MATRIX_STARTUP_SAT 255
+#    define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#    define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL
+#endif  // RGB_MATRIX_ENABLE