summaryrefslogtreecommitdiff
path: root/keyboards/ai03
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/ai03')
-rw-r--r--keyboards/ai03/orbit/config.h13
-rw-r--r--keyboards/ai03/orbit/keymaps/default/keymap.c16
-rw-r--r--keyboards/ai03/orbit/matrix.c323
-rw-r--r--keyboards/ai03/orbit/orbit.c270
-rw-r--r--keyboards/ai03/orbit/orbit.h17
-rw-r--r--keyboards/ai03/orbit/readme.md6
-rw-r--r--keyboards/ai03/orbit/rules.mk10
-rw-r--r--keyboards/ai03/orbit/serial.c545
-rw-r--r--keyboards/ai03/orbit/serial.h62
-rw-r--r--keyboards/ai03/orbit/split_flags.c5
-rw-r--r--keyboards/ai03/orbit/split_flags.h15
-rw-r--r--keyboards/ai03/orbit/split_util.c87
-rw-r--r--keyboards/ai03/orbit/split_util.h10
-rw-r--r--keyboards/ai03/orbit/transport.c238
-rw-r--r--keyboards/ai03/orbit/transport.h42
15 files changed, 115 insertions, 1544 deletions
diff --git a/keyboards/ai03/orbit/config.h b/keyboards/ai03/orbit/config.h
index 9ad384c8ff..0e4f4c3baf 100644
--- a/keyboards/ai03/orbit/config.h
+++ b/keyboards/ai03/orbit/config.h
@@ -44,13 +44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_COL_PINS { C7, B4, D7, D6, D4, F1, F0 }
#define MATRIX_ROW_PINS_RIGHT { B6, B5, B4, D7, E6 }
#define MATRIX_COL_PINS_RIGHT { D4, D6, F1, F0, F4, F5, C6 }
-
-#define SPLIT_HAND_PIN D5
-
-//#define USE_I2C
-
-#define SELECT_SOFT_SERIAL_SPEED 1
-
#define UNUSED_PINS
/* COL2ROW, ROW2COL */
@@ -60,6 +53,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
*/
#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+#define SELECT_SOFT_SERIAL_SPEED 1
+
+#define SPLIT_LED_STATE_ENABLE
+#define SPLIT_LAYER_STATE_ENABLE
+
+#define SPLIT_HAND_PIN D5
#define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING
diff --git a/keyboards/ai03/orbit/keymaps/default/keymap.c b/keyboards/ai03/orbit/keymaps/default/keymap.c
index 6d4eef27c7..0c93f04897 100644
--- a/keyboards/ai03/orbit/keymaps/default/keymap.c
+++ b/keyboards/ai03/orbit/keymaps/default/keymap.c
@@ -48,25 +48,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case MANUAL:
- if (record->event.pressed)
- {
- // Keypress
+ if (record->event.pressed) {
SEND_STRING("https://kb.ai03.me/redir/orbit");
- }
- else
- {
- // Key release
}
break;
case DBLZERO:
- if (record->event.pressed)
- {
- // Keypress
+ if (record->event.pressed) {
SEND_STRING("00");
- }
- else
- {
- // Key release
}
break;
}
diff --git a/keyboards/ai03/orbit/matrix.c b/keyboards/ai03/orbit/matrix.c
deleted file mode 100644
index 024233524c..0000000000
--- a/keyboards/ai03/orbit/matrix.c
+++ /dev/null
@@ -1,323 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include "wait.h"
-#include "util.h"
-#include "matrix.h"
-#include "split_util.h"
-#include "config.h"
-#include "split_flags.h"
-#include "quantum.h"
-#include "debounce.h"
-#include "transport.h"
-
-#if (MATRIX_COLS <= 8)
-# define print_matrix_header() print("\nr/c 01234567\n")
-# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop(matrix[i])
-# define ROW_SHIFTER ((uint8_t)1)
-#elif (MATRIX_COLS <= 16)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop16(matrix[i])
-# define ROW_SHIFTER ((uint16_t)1)
-#elif (MATRIX_COLS <= 32)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop32(matrix[i])
-# define ROW_SHIFTER ((uint32_t)1)
-#endif
-
-#define ERROR_DISCONNECT_COUNT 5
-
-//#define ROWS_PER_HAND (MATRIX_ROWS / 2)
-
-#ifdef DIRECT_PINS
-static pin_t direct_pins[MATRIX_ROWS][MATRIX_COLS] = DIRECT_PINS;
-#else
-static pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
-static pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
-#endif
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t raw_matrix[ROWS_PER_HAND];
-
-// row offsets for each hand
-uint8_t thisHand, thatHand;
-
-// user-defined overridable functions
-
-__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); }
-
-__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); }
-
-__attribute__((weak)) void matrix_init_user(void) {}
-
-__attribute__((weak)) void matrix_scan_user(void) {}
-
-__attribute__((weak)) void matrix_slave_scan_user(void) {}
-
-// helper functions
-
-inline uint8_t matrix_rows(void) { return MATRIX_ROWS; }
-
-inline uint8_t matrix_cols(void) { return MATRIX_COLS; }
-
-inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); }
-
-inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; }
-
-void matrix_print(void) {
- print_matrix_header();
-
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- print_hex8(row);
- print(": ");
- print_matrix_row(row);
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void) {
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += matrix_bitpop(i);
- }
- return count;
-}
-
-// matrix code
-
-#ifdef DIRECT_PINS
-
-static void init_pins(void) {
- for (int row = 0; row < MATRIX_ROWS; row++) {
- for (int col = 0; col < MATRIX_COLS; col++) {
- pin_t pin = direct_pins[row][col];
- if (pin != NO_PIN) {
- setPinInputHigh(pin);
- }
- }
- }
-}
-
-static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) {
- matrix_row_t last_row_value = current_matrix[current_row];
- current_matrix[current_row] = 0;
-
- for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
- pin_t pin = direct_pins[current_row][col_index];
- if (pin != NO_PIN) {
- current_matrix[current_row] |= readPin(pin) ? 0 : (ROW_SHIFTER << col_index);
- }
- }
-
- return (last_row_value != current_matrix[current_row]);
-}
-
-#elif (DIODE_DIRECTION == COL2ROW)
-
-static void select_row(uint8_t row) {
- setPinOutput(row_pins[row]);
- writePinLow(row_pins[row]);
-}
-
-static void unselect_row(uint8_t row) { setPinInputHigh(row_pins[row]); }
-
-static void unselect_rows(void) {
- for (uint8_t x = 0; x < ROWS_PER_HAND; x++) {
- setPinInputHigh(row_pins[x]);
- }
-}
-
-static void init_pins(void) {
- unselect_rows();
- for (uint8_t x = 0; x < MATRIX_COLS; x++) {
- setPinInputHigh(col_pins[x]);
- }
-}
-
-static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) {
- // Store last value of row prior to reading
- matrix_row_t last_row_value = current_matrix[current_row];
-
- // Clear data in matrix row
- current_matrix[current_row] = 0;
-
- // Select row and wait for row selecton to stabilize
- select_row(current_row);
- wait_us(30);
-
- // For each col...
- for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
- // Populate the matrix row with the state of the col pin
- current_matrix[current_row] |= readPin(col_pins[col_index]) ? 0 : (ROW_SHIFTER << col_index);
- }
-
- // Unselect row
- unselect_row(current_row);
-
- return (last_row_value != current_matrix[current_row]);
-}
-
-#elif (DIODE_DIRECTION == ROW2COL)
-
-static void select_col(uint8_t col) {
- setPinOutput(col_pins[col]);
- writePinLow(col_pins[col]);
-}
-
-static void unselect_col(uint8_t col) { setPinInputHigh(col_pins[col]); }
-
-static void unselect_cols(void) {
- for (uint8_t x = 0; x < MATRIX_COLS; x++) {
- setPinInputHigh(col_pins[x]);
- }
-}
-
-static void init_pins(void) {
- unselect_cols();
- for (uint8_t x = 0; x < ROWS_PER_HAND; x++) {
- setPinInputHigh(row_pins[x]);
- }
-}
-
-static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) {
- bool matrix_changed = false;
-
- // Select col and wait for col selecton to stabilize
- select_col(current_col);
- wait_us(30);
-
- // For each row...
- for (uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++) {
- // Store last value of row prior to reading
- matrix_row_t last_row_value = current_matrix[row_index];
-
- // Check row pin state
- if (readPin(row_pins[row_index])) {
- // Pin HI, clear col bit
- current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
- } else {
- // Pin LO, set col bit
- current_matrix[row_index] |= (ROW_SHIFTER << current_col);
- }
-
- // Determine if the matrix changed state
- if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) {
- matrix_changed = true;
- }
- }
-
- // Unselect col
- unselect_col(current_col);
-
- return matrix_changed;
-}
-
-#endif
-
-void matrix_init(void) {
- debug_enable = true;
- debug_matrix = true;
- debug_mouse = true;
-
- // Set pinout for right half if pinout for that half is defined
- if (!isLeftHand) {
-#ifdef MATRIX_ROW_PINS_RIGHT
- const uint8_t row_pins_right[MATRIX_ROWS] = MATRIX_ROW_PINS_RIGHT;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- row_pins[i] = row_pins_right[i];
- }
-#endif
-#ifdef MATRIX_COL_PINS_RIGHT
- const uint8_t col_pins_right[MATRIX_COLS] = MATRIX_COL_PINS_RIGHT;
- for (uint8_t i = 0; i < MATRIX_COLS; i++) {
- col_pins[i] = col_pins_right[i];
- }
-#endif
- }
-
- thisHand = isLeftHand ? 0 : (ROWS_PER_HAND);
- thatHand = ROWS_PER_HAND - thisHand;
-
- // initialize key pins
- init_pins();
-
- // initialize matrix state: all keys off
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- matrix[i] = 0;
- }
-
- debounce_init(ROWS_PER_HAND);
-
- matrix_init_quantum();
-}
-
-uint8_t _matrix_scan(void) {
- bool changed = false;
-
-#if defined(DIRECT_PINS) || (DIODE_DIRECTION == COL2ROW)
- // Set row, read cols
- for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
- changed |= read_cols_on_row(raw_matrix, current_row);
- }
-#elif (DIODE_DIRECTION == ROW2COL)
- // Set col, read rows
- for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
- changed |= read_rows_on_col(raw_matrix, current_col);
- }
-#endif
-
- debounce(raw_matrix, matrix + thisHand, ROWS_PER_HAND, changed);
-
- return 1;
-}
-
-uint8_t matrix_scan(void) {
- uint8_t ret = _matrix_scan();
-
- if (is_keyboard_master()) {
- static uint8_t error_count;
-
- if (!transport_master(matrix + thatHand)) {
- error_count++;
-
- if (error_count > ERROR_DISCONNECT_COUNT) {
- // reset other half if disconnected
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- matrix[thatHand + i] = 0;
- }
- }
- } else {
- error_count = 0;
- }
-
- matrix_scan_quantum();
- } else {
- transport_slave(matrix + thisHand);
- matrix_slave_scan_user();
- }
-
- return ret;
-}
diff --git a/keyboards/ai03/orbit/orbit.c b/keyboards/ai03/orbit/orbit.c
index 97553e318a..5097f9cd90 100644
--- a/keyboards/ai03/orbit/orbit.c
+++ b/keyboards/ai03/orbit/orbit.c
@@ -15,196 +15,124 @@
*/
#include "orbit.h"
#include "split_util.h"
-#include "transport.h"
+void led_init_ports(void) {
+ // Initialize indicator LEDs to output
+ if (isLeftHand) {
+ setPinOutput(C6);
+ setPinOutput(B6);
+ setPinOutput(B5);
+ } else {
+ setPinOutput(F6);
+ setPinOutput(F7);
+ setPinOutput(C7);
+ }
+
+ set_layer_indicators(0);
+}
// Call led_toggle to set LEDs easily
// LED IDs:
-//
+//
// (LEFT) 0 1 2 | 3 4 5 (RIGHT)
-
-void led_toggle(int id, bool on) {
-
- if (isLeftHand) {
- switch(id) {
- case 0:
- // Left hand C6
- if (on)
- //PORTC |= (1<<6);
- writePinHigh(C6);
- else
- //PORTC &= ~(1<<6);
- writePinLow(C6);
- break;
- case 1:
- // Left hand B6
- if (on)
- //PORTB |= (1<<6);
- writePinHigh(B6);
- else
- //PORTB &= ~(1<<6);
- writePinLow(B6);
- break;
- case 2:
- // Left hand B5
- if (on)
- //PORTB |= (1<<5);
- writePinHigh(B5);
- else
- //PORTB &= ~(1<<5);
- writePinLow(B5);
- break;
- default:
- break;
- }
- } else {
- switch(id) {
- case 3:
- // Right hand F6
- if (on)
- //PORTF |= (1<<6);
- writePinHigh(F6);
- else
- //PORTF &= ~(1<<6);
- writePinLow(F6);
- break;
- case 4:
- // Right hand F7
- if (on)
- //PORTF |= (1<<7);
- writePinHigh(F7);
- else
- //PORTF &= ~(1<<7);
- writePinLow(F7);
- break;
- case 5:
- // Right hand C7
- if (on)
- //PORTC |= (1<<7);
- writePinHigh(C7);
- else
- //PORTC &= ~(1<<7);
- writePinLow(C7);
- break;
- default:
- break;
- }
- }
+void led_toggle(uint8_t id, bool on) {
+ if (isLeftHand) {
+ switch (id) {
+ case 0:
+ // Left hand C6
+ writePin(C6, on);
+ break;
+ case 1:
+ // Left hand B6
+ writePin(B6, on);
+ break;
+ case 2:
+ // Left hand B5
+ writePin(B5, on);
+ break;
+ default:
+ break;
+ }
+ } else {
+ switch (id) {
+ case 3:
+ // Right hand F6
+ writePin(F6, on);
+ break;
+ case 4:
+ // Right hand F7
+ writePin(F7, on);
+ break;
+ case 5:
+ // Right hand C7
+ writePin(C7, on);
+ break;
+ default:
+ break;
+ }
+ }
}
// Set all LEDs at once using an array of 6 booleans
// LED IDs:
-//
+//
// (LEFT) 0 1 2 | 3 4 5 (RIGHT)
-//
+//
// Ex. set_all_leds({ false, false, false, true, true, true }) would turn off left hand, turn on right hand
void set_all_leds(bool leds[6]) {
- for (int i = 0; i < 6; i++) {
- led_toggle(i, leds[i]);
- }
+ for (int i = 0; i < 6; i++) {
+ led_toggle(i, leds[i]);
+ }
}
void set_layer_indicators(uint8_t layer) {
-
- switch (layer)
- {
- case 0:
- led_toggle(0, true);
- led_toggle(1, false);
- led_toggle(2, false);
- break;
- case 1:
- led_toggle(0, true);
- led_toggle(1, true);
- led_toggle(2, false);
- break;
- case 2:
- led_toggle(0, true);
- led_toggle(1, true);
- led_toggle(2, true);
- break;
- case 3:
- led_toggle(0, false);
- led_toggle(1, true);
- led_toggle(2, true);
- break;
- case 4:
- led_toggle(0, false);
- led_toggle(1, false);
- led_toggle(2, true);
- break;
- default:
- led_toggle(0, true);
- led_toggle(1, false);
- led_toggle(2, true);
- break;
- }
-
+ switch (layer) {
+ case 0:
+ led_toggle(0, true);
+ led_toggle(1, false);
+ led_toggle(2, false);
+ break;
+ case 1:
+ led_toggle(0, true);
+ led_toggle(1, true);
+ led_toggle(2, false);
+ break;
+ case 2:
+ led_toggle(0, true);
+ led_toggle(1, true);
+ led_toggle(2, true);
+ break;
+ case 3:
+ led_toggle(0, false);
+ led_toggle(1, true);
+ led_toggle(2, true);
+ break;
+ case 4:
+ led_toggle(0, false);
+ led_toggle(1, false);
+ led_toggle(2, true);
+ break;
+ default:
+ led_toggle(0, true);
+ led_toggle(1, false);
+ led_toggle(2, true);
+ break;
+ }
}
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
-
- // Initialize indicator LEDs to output
- if (isLeftHand)
- {
- setPinOutput(C6);
- setPinOutput(B6);
- setPinOutput(B5);
- //DDRC |= (1<<6);
- //DDRB |= (1<<6);
- //DDRB |= (1<<5);
- }
- else
- {
- setPinOutput(F6);
- setPinOutput(F7);
- setPinOutput(C7);
- //DDRF |= (1<<6);
- //DDRF |= (1<<7);
- //DDRC |= (1<<7);
- }
-
- set_layer_indicators(0);
-
- matrix_init_user();
+bool led_update_kb(led_t led_state) {
+ bool res = led_update_user(led_state);
+ if (res) {
+ led_toggle(3, led_state.num_lock);
+ led_toggle(4, led_state.caps_lock);
+ led_toggle(5, led_state.scroll_lock);
+ }
+ return res;
}
-void led_set_kb(uint8_t usb_led) {
- // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
- if (is_keyboard_master()) {
-
- serial_m2s_buffer.nlock_led = IS_LED_ON(usb_led, USB_LED_NUM_LOCK);
- serial_m2s_buffer.clock_led = IS_LED_ON(usb_led, USB_LED_CAPS_LOCK);
- serial_m2s_buffer.slock_led = IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK);
-
- led_toggle(3, IS_LED_ON(usb_led, USB_LED_NUM_LOCK));
- led_toggle(4, IS_LED_ON(usb_led, USB_LED_CAPS_LOCK));
- led_toggle(5, IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK));
-
- }
-
- led_set_user(usb_led);
-}
+layer_state_t layer_state_set_kb(layer_state_t state) {
+ set_layer_indicators(get_highest_layer(state));
-uint32_t layer_state_set_kb(uint32_t state) {
-
- if (is_keyboard_master())
- {
- serial_m2s_buffer.current_layer = biton32(state);
-
- // If left half, do the LED toggle thing
- if (isLeftHand)
- {
- set_layer_indicators(biton32(state));
- }
-
- }
- // NOTE: Do not set slave LEDs here.
- // This is not called on slave
-
- return layer_state_set_user(state);
+ return layer_state_set_user(state);
}
diff --git a/keyboards/ai03/orbit/orbit.h b/keyboards/ai03/orbit/orbit.h
index 39f1ebb0e3..7f3b1aca32 100644
--- a/keyboards/ai03/orbit/orbit.h
+++ b/keyboards/ai03/orbit/orbit.h
@@ -18,6 +18,8 @@
#include "quantum.h"
+#define XXX KC_NO
+
/* This a shortcut to help you visually see your layout.
*
* The first section contains all of the arguments representing the physical
@@ -26,17 +28,6 @@
* The second converts the arguments into a two-dimensional array which
* represents the switch matrix.
*/
-
-#ifdef USE_I2C
-#include <stddef.h>
-#ifdef __AVR__
- #include <avr/io.h>
- #include <avr/interrupt.h>
-#endif
-#endif
-
-#define XXX KC_NO
-
#define LAYOUT( \
L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
@@ -56,6 +47,6 @@
{ R40, R41, R42, R43, R44, R45, XXX } \
}
-extern void led_toggle(int id, bool on);
+void led_toggle(uint8_t id, bool on);
void set_all_leds(bool leds[6]);
-extern void set_layer_indicators(uint8_t layer);
+void set_layer_indicators(uint8_t layer);
diff --git a/keyboards/ai03/orbit/readme.md b/keyboards/ai03/orbit/readme.md
index 58ba2079d5..0c320929b6 100644
--- a/keyboards/ai03/orbit/readme.md
+++ b/keyboards/ai03/orbit/readme.md
@@ -4,9 +4,9 @@
A split ergonomic keyboard project.
-Keyboard Maintainer: [ai03](https://github.com/ai03-2725)
-Hardware Supported: The [Orbit PCB](https://github.com/ai03-2725/Orbit)
-Hardware Availability: [This repository](https://github.com/ai03-2725/Orbit) has PCB files. Case group buy orders are currently closed.
+* Keyboard Maintainer: [ai03](https://github.com/ai03-2725)
+* Hardware Supported: The [Orbit PCB](https://github.com/ai03-2725/Orbit)
+* Hardware Availability: [This repository](https://github.com/ai03-2725/Orbit) has PCB files. Case group buy orders are currently closed.
Make example for this keyboard (after setting up your build environment):
diff --git a/keyboards/ai03/orbit/rules.mk b/keyboards/ai03/orbit/rules.mk
index fc66f9f6d0..5b082d9431 100644
--- a/keyboards/ai03/orbit/rules.mk
+++ b/keyboards/ai03/orbit/rules.mk
@@ -19,12 +19,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
-USE_I2C = no # I2C for split communication
-CUSTOM_MATRIX = yes # For providing custom matrix.c (in this case, override regular matrix.c with split matrix.c)
-# SPLIT_KEYBOARD = yes # Split keyboard flag disabled as manual edits had to be done to the split common files
-
-SRC += split_util.c \
- split_flags.c \
- serial.c \
- transport.c \
- matrix.c
+SPLIT_KEYBOARD = yes # Split keyboard flag disabled as manual edits had to be done to the split common files
diff --git a/keyboards/ai03/orbit/serial.c b/keyboards/ai03/orbit/serial.c
deleted file mode 100644
index 636dfa0906..0000000000
--- a/keyboards/ai03/orbit/serial.c
+++ /dev/null
@@ -1,545 +0,0 @@
-/*
- * WARNING: be careful changing this code, it is very timing dependent
- *
- * 2018-10-28 checked
- * avr-gcc 4.9.2
- * avr-gcc 5.4.0
- * avr-gcc 7.3.0
- */
-
-#ifndef F_CPU
-#define F_CPU 16000000
-#endif
-
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include <stddef.h>
-#include <stdbool.h>
-#include "serial.h"
-
-#ifdef SOFT_SERIAL_PIN
-
-#ifdef __AVR_ATmega32U4__
- // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial.
- #ifdef USE_AVR_I2C
- #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1
- #error Using ATmega32U4 I2C, so can not use PD0, PD1
- #endif
- #endif
-
- #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3
- #define SERIAL_PIN_DDR DDRD
- #define SERIAL_PIN_PORT PORTD
- #define SERIAL_PIN_INPUT PIND
- #if SOFT_SERIAL_PIN == D0
- #define SERIAL_PIN_MASK _BV(PD0)
- #define EIMSK_BIT _BV(INT0)
- #define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01)))
- #define SERIAL_PIN_INTERRUPT INT0_vect
- #elif SOFT_SERIAL_PIN == D1
- #define SERIAL_PIN_MASK _BV(PD1)
- #define EIMSK_BIT _BV(INT1)
- #define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11)))
- #define SERIAL_PIN_INTERRUPT INT1_vect
- #elif SOFT_SERIAL_PIN == D2
- #define SERIAL_PIN_MASK _BV(PD2)
- #define EIMSK_BIT _BV(INT2)
- #define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21)))
- #define SERIAL_PIN_INTERRUPT INT2_vect
- #elif SOFT_SERIAL_PIN == D3
- #define SERIAL_PIN_MASK _BV(PD3)
- #define EIMSK_BIT _BV(INT3)
- #define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31)))
- #define SERIAL_PIN_INTERRUPT INT3_vect
- #endif
- #elif SOFT_SERIAL_PIN == E6
- #define SERIAL_PIN_DDR DDRE
- #define SERIAL_PIN_PORT PORTE
- #define SERIAL_PIN_INPUT PINE
- #define SERIAL_PIN_MASK _BV(PE6)
- #define EIMSK_BIT _BV(INT6)
- #define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61)))
- #define SERIAL_PIN_INTERRUPT INT6_vect
- #else
- #error invalid SOFT_SERIAL_PIN value
- #endif
-
-#else
- #error serial.c now support ATmega32U4 only
-#endif
-
-#define ALWAYS_INLINE __attribute__((always_inline))
-#define NO_INLINE __attribute__((noinline))
-#define _delay_sub_us(x) __builtin_avr_delay_cycles(x)
-
-// parity check
-#define ODD_PARITY 1
-#define EVEN_PARITY 0
-#define PARITY EVEN_PARITY
-
-#ifdef SERIAL_DELAY
- // custom setup in config.h
- // #define TID_SEND_ADJUST 2
- // #define SERIAL_DELAY 6 // micro sec
- // #define READ_WRITE_START_ADJUST 30 // cycles
- // #define READ_WRITE_WIDTH_ADJUST 8 // cycles
-#else
-// ============ Standard setups ============
-
-#ifndef SELECT_SOFT_SERIAL_SPEED
-#define SELECT_SOFT_SERIAL_SPEED 1
-// 0: about 189kbps (Experimental only)
-// 1: about 137kbps (default)
-// 2: about 75kbps
-// 3: about 39kbps
-// 4: about 26kbps
-// 5: about 20kbps
-#endif
-
-#if __GNUC__ < 6
- #define TID_SEND_ADJUST 14
-#else
- #define TID_SEND_ADJUST 2
-#endif
-
-#if SELECT_SOFT_SERIAL_SPEED == 0
- // Very High speed
- #define SERIAL_DELAY 4 // micro sec
- #if __GNUC__ < 6
- #define READ_WRITE_START_ADJUST 33 // cycles
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_START_ADJUST 34 // cycles
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 1
- // High speed
- #define SERIAL_DELAY 6 // micro sec
- #if __GNUC__ < 6
- #define READ_WRITE_START_ADJUST 30 // cycles
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_START_ADJUST 33 // cycles
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 2
- // Middle speed
- #define SERIAL_DELAY 12 // micro sec
- #define READ_WRITE_START_ADJUST 30 // cycles
- #if __GNUC__ < 6
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 3
- // Low speed
- #define SERIAL_DELAY 24 // micro sec
- #define READ_WRITE_START_ADJUST 30 // cycles
- #if __GNUC__ < 6
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 4
- // Very Low speed
- #define SERIAL_DELAY 36 // micro sec
- #define READ_WRITE_START_ADJUST 30 // cycles
- #if __GNUC__ < 6
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 5
- // Ultra Low speed
- #define SERIAL_DELAY 48 // micro sec
- #define READ_WRITE_START_ADJUST 30 // cycles
- #if __GNUC__ < 6
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#else
-#error invalid SELECT_SOFT_SERIAL_SPEED value
-#endif /* SELECT_SOFT_SERIAL_SPEED */
-#endif /* SERIAL_DELAY */
-
-#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2)
-#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2)
-
-#define SLAVE_INT_WIDTH_US 1
-#ifndef SERIAL_USE_MULTI_TRANSACTION
- #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY
-#else
- #define SLAVE_INT_ACK_WIDTH_UNIT 2
- #define SLAVE_INT_ACK_WIDTH 4
-#endif
-
-static SSTD_t *Transaction_table = NULL;
-static uint8_t Transaction_table_size = 0;
-
-inline static void serial_delay(void) ALWAYS_INLINE;
-inline static
-void serial_delay(void) {
- _delay_us(SERIAL_DELAY);
-}
-
-inline static void serial_delay_half1(void) ALWAYS_INLINE;
-inline static
-void serial_delay_half1(void) {
- _delay_us(SERIAL_DELAY_HALF1);
-}
-
-inline static void serial_delay_half2(void) ALWAYS_INLINE;
-inline static
-void serial_delay_half2(void) {
- _delay_us(SERIAL_DELAY_HALF2);
-}
-
-inline static void serial_output(void) ALWAYS_INLINE;
-inline static
-void serial_output(void) {
- SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
-}
-
-// make the serial pin an input with pull-up resistor
-inline static void serial_input_with_pullup(void) ALWAYS_INLINE;
-inline static
-void serial_input_with_pullup(void) {
- SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK;
- SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
-}
-
-inline static uint8_t serial_read_pin(void) ALWAYS_INLINE;
-inline static
-uint8_t serial_read_pin(void) {
- return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
-}
-
-inline static void serial_low(void) ALWAYS_INLINE;
-inline static
-void serial_low(void) {
- SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
-}
-
-inline static void serial_high(void) ALWAYS_INLINE;
-inline static
-void serial_high(void) {
- SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
-}
-
-void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size)
-{
- Transaction_table = sstd_table;
- Transaction_table_size = (uint8_t)sstd_table_size;
- serial_output();
- serial_high();
-}
-
-void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size)
-{
- Transaction_table = sstd_table;
- Transaction_table_size = (uint8_t)sstd_table_size;
- serial_input_with_pullup();
-
- // Enable INT0-INT3,INT6
- EIMSK |= EIMSK_BIT;
-#if SERIAL_PIN_MASK == _BV(PE6)
- // Trigger on falling edge of INT6
- EICRB &= EICRx_BIT;
-#else
- // Trigger on falling edge of INT0-INT3
- EICRA &= EICRx_BIT;
-#endif
-}
-
-// Used by the sender to synchronize timing with the reciver.
-static void sync_recv(void) NO_INLINE;
-static
-void sync_recv(void) {
- for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) {
- }
- // This shouldn't hang if the target disconnects because the
- // serial line will float to high if the target does disconnect.
- while (!serial_read_pin());
-}
-
-// Used by the reciver to send a synchronization signal to the sender.
-static void sync_send(void) NO_INLINE;
-static
-void sync_send(void) {
- serial_low();
- serial_delay();
- serial_high();
-}
-
-// Reads a byte from the serial line
-static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE;
-static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) {
- uint8_t byte, i, p, pb;
-
- _delay_sub_us(READ_WRITE_START_ADJUST);
- for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) {
- serial_delay_half1(); // read the middle of pulses
- if( serial_read_pin() ) {
- byte = (byte << 1) | 1; p ^= 1;
- } else {
- byte = (byte << 1) | 0; p ^= 0;
- }
- _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
- serial_delay_half2();
- }
- /* recive parity bit */
- serial_delay_half1(); // read the middle of pulses
- pb = serial_read_pin();
- _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
- serial_delay_half2();
-
- *pterrcount += (p != pb)? 1 : 0;
-
- return byte;
-}
-
-// Sends a byte with MSB ordering
-void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE;
-void serial_write_chunk(uint8_t data, uint8_t bit) {
- uint8_t b, p;
- for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) {
- if(data & b) {
- serial_high(); p ^= 1;
- } else {
- serial_low(); p ^= 0;
- }
- serial_delay();
- }
- /* send parity bit */
- if(p & 1) { serial_high(); }
- else { serial_low(); }
- serial_delay();
-
- serial_low(); // sync_send() / senc_recv() need raise edge
-}
-
-static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
-static
-void serial_send_packet(uint8_t *buffer, uint8_t size) {
- for (uint8_t i = 0; i < size; ++i) {
- uint8_t data;
- data = buffer[i];
- sync_send();
- serial_write_chunk(data,8);
- }
-}
-
-static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
-static
-uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) {
- uint8_t pecount = 0;
- for (uint8_t i = 0; i < size; ++i) {
- uint8_t data;
- sync_recv();
- data = serial_read_chunk(&pecount, 8);
- buffer[i] = data;
- }
- return pecount == 0;
-}
-
-inline static
-void change_sender2reciver(void) {
- sync_send(); //0
- serial_delay_half1(); //1
- serial_low(); //2
- serial_input_with_pullup(); //2
- serial_delay_half1(); //3
-}
-
-inline static
-void change_reciver2sender(void) {
- sync_recv(); //0
- serial_delay(); //1
- serial_low(); //3
- serial_output(); //3
- serial_delay_half1(); //4
-}
-
-static inline uint8_t nibble_bits_count(uint8_t bits)
-{
- bits = (bits & 0x5) + (bits >> 1 & 0x5);
- bits = (bits & 0x3) + (bits >> 2 & 0x3);
- return bits;
-}
-
-// interrupt handle to be used by the target device
-ISR(SERIAL_PIN_INTERRUPT) {
-
-#ifndef SERIAL_USE_MULTI_TRANSACTION
- serial_low();
- serial_output();
- SSTD_t *trans = Transaction_table;
-#else
- // recive transaction table index
- uint8_t tid, bits;
- uint8_t pecount = 0;
- sync_recv();
- bits = serial_read_chunk(&pecount,7);
- tid = bits>>3;
- bits = (bits&7) != nibble_bits_count(tid);
- if( bits || pecount> 0 || tid > Transaction_table_size ) {
- return;
- }
- serial_delay_half1();
-
- serial_high(); // response step1 low->high
- serial_output();
- _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH);
- SSTD_t *trans = &Transaction_table[tid];
- serial_low(); // response step2 ack high->low
-#endif
-
- // target send phase
- if( trans->target2initiator_buffer_size > 0 )
- serial_send_packet((uint8_t *)trans->target2initiator_buffer,
- trans->target2initiator_buffer_size);
- // target switch to input
- change_sender2reciver();
-
- // target recive phase
- if( trans->initiator2target_buffer_size > 0 ) {
- if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer,
- trans->initiator2target_buffer_size) ) {
- *trans->status = TRANSACTION_ACCEPTED;
- } else {
- *trans->status = TRANSACTION_DATA_ERROR;
- }
- } else {
- *trans->status = TRANSACTION_ACCEPTED;
- }
-
- sync_recv(); //weit initiator output to high
-}
-
-/////////
-// start transaction by initiator
-//
-// int soft_serial_transaction(int sstd_index)
-//
-// Returns:
-// TRANSACTION_END
-// TRANSACTION_NO_RESPONSE
-// TRANSACTION_DATA_ERROR
-// this code is very time dependent, so we need to disable interrupts
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_transaction(void) {
- SSTD_t *trans = Transaction_table;
-#else
-int soft_serial_transaction(int sstd_index) {
- if( sstd_index > Transaction_table_size )
- return TRANSACTION_TYPE_ERROR;
- SSTD_t *trans = &Transaction_table[sstd_index];
-#endif
- cli();
-
- // signal to the target that we want to start a transaction
- serial_output();
- serial_low();
- _delay_us(SLAVE_INT_WIDTH_US);
-
-#ifndef SERIAL_USE_MULTI_TRANSACTION
- // wait for the target response
- serial_input_with_pullup();
- _delay_us(SLAVE_INT_RESPONSE_TIME);
-
- // check if the target is present
- if (serial_read_pin()) {
- // target failed to pull the line low, assume not present
- serial_output();
- serial_high();
- *trans->status = TRANSACTION_NO_RESPONSE;
- sei();
- return TRANSACTION_NO_RESPONSE;
- }
-
-#else
- // send transaction table index
- int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index));
- sync_send();
- _delay_sub_us(TID_SEND_ADJUST);
- serial_write_chunk(tid, 7);
- serial_delay_half1();
-
- // wait for the target response (step1 low->high)
- serial_input_with_pullup();
- while( !serial_read_pin() ) {
- _delay_sub_us(2);
- }
-
- // check if the target is present (step2 high->low)
- for( int i = 0; serial_read_pin(); i++ ) {
- if (i > SLAVE_INT_ACK_WIDTH + 1) {
- // slave failed to pull the line low, assume not present
- serial_output();
- serial_high();
- *trans->status = TRANSACTION_NO_RESPONSE;
- sei();
- return TRANSACTION_NO_RESPONSE;
- }
- _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT);
- }
-#endif
-
- // initiator recive phase
- // if the target is present syncronize with it
- if( trans->target2initiator_buffer_size > 0 ) {
- if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer,
- trans->target2initiator_buffer_size) ) {
- serial_output();
- serial_high();
- *trans->status = TRANSACTION_DATA_ERROR;
- sei();
- return TRANSACTION_DATA_ERROR;
- }
- }
-
- // initiator switch to output
- change_reciver2sender();
-
- // initiator send phase
- if( trans->initiator2target_buffer_size > 0 ) {
- serial_send_packet((uint8_t *)trans->initiator2target_buffer,
- trans->initiator2target_buffer_size);
- }
-
- // always, release the line when not in use
- sync_send();
-
- *trans->status = TRANSACTION_END;
- sei();
- return TRANSACTION_END;
-}
-
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_get_and_clean_status(int sstd_index) {
- SSTD_t *trans = &Transaction_table[sstd_index];
- cli();
- int retval = *trans->status;
- *trans->status = 0;;
- sei();
- return retval;
-}
-#endif
-
-#endif
-
-// Helix serial.c history
-// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc)
-// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4)
-// (adjusted with avr-gcc 4.9.2)
-// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78)
-// (adjusted with avr-gcc 4.9.2)
-// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae)
-// (adjusted with avr-gcc 4.9.2)
-// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff)
-// (adjusted with avr-gcc 7.3.0)
-// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66)
-// (adjusted with avr-gcc 5.4.0, 7.3.0)
-// 2018-12-17 copy to TOP/quantum/split_common/ and remove backward compatibility code (#4669)
diff --git a/keyboards/ai03/orbit/serial.h b/keyboards/ai03/orbit/serial.h
deleted file mode 100644
index 1c1e640069..0000000000
--- a/keyboards/ai03/orbit/serial.h
+++ /dev/null
@@ -1,62 +0,0 @@
-#pragma once
-
-#include <stdbool.h>
-
-// /////////////////////////////////////////////////////////////////
-// Need Soft Serial defines in config.h
-// /////////////////////////////////////////////////////////////////
-// ex.
-// #define SOFT_SERIAL_PIN ?? // ?? = D0,D1,D2,D3,E6
-// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5
-// // 1: about 137kbps (default)
-// // 2: about 75kbps
-// // 3: about 39kbps
-// // 4: about 26kbps
-// // 5: about 20kbps
-//
-// //// USE simple API (using signle-type transaction function)
-// /* nothing */
-// //// USE flexible API (using multi-type transaction function)
-// #define SERIAL_USE_MULTI_TRANSACTION
-//
-// /////////////////////////////////////////////////////////////////
-
-// Soft Serial Transaction Descriptor
-typedef struct _SSTD_t {
- uint8_t *status;
- uint8_t initiator2target_buffer_size;
- uint8_t *initiator2target_buffer;
- uint8_t target2initiator_buffer_size;
- uint8_t *target2initiator_buffer;
-} SSTD_t;
-#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t))
-
-// initiator is transaction start side
-void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size);
-// target is interrupt accept side
-void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size);
-
-// initiator resullt
-#define TRANSACTION_END 0
-#define TRANSACTION_NO_RESPONSE 0x1
-#define TRANSACTION_DATA_ERROR 0x2
-#define TRANSACTION_TYPE_ERROR 0x4
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_transaction(void);
-#else
-int soft_serial_transaction(int sstd_index);
-#endif
-
-// target status
-// *SSTD_t.status has
-// initiator:
-// TRANSACTION_END
-// or TRANSACTION_NO_RESPONSE
-// or TRANSACTION_DATA_ERROR
-// target:
-// TRANSACTION_DATA_ERROR
-// or TRANSACTION_ACCEPTED
-#define TRANSACTION_ACCEPTED 0x8
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_get_and_clean_status(int sstd_index);
-#endif
diff --git a/keyboards/ai03/orbit/split_flags.c b/keyboards/ai03/orbit/split_flags.c
deleted file mode 100644
index 1f5825d650..0000000000
--- a/keyboards/ai03/orbit/split_flags.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include "split_flags.h"
-
-volatile bool RGB_DIRTY = false;
-
-volatile bool BACKLIT_DIRTY = false; \ No newline at end of file
diff --git a/keyboards/ai03/orbit/split_flags.h b/keyboards/ai03/orbit/split_flags.h
deleted file mode 100644
index aaac474a7d..0000000000
--- a/keyboards/ai03/orbit/split_flags.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#pragma once
-
-#include <stdbool.h>
-#include <stdint.h>
-
-/**
-* Global Flags
-**/
-
-//RGB Stuff
-extern volatile bool RGB_DIRTY;
-
-
-//Backlight Stuff
-extern volatile bool BACKLIT_DIRTY;
diff --git a/keyboards/ai03/orbit/split_util.c b/keyboards/ai03/orbit/split_util.c
deleted file mode 100644
index 2352e5a111..0000000000
--- a/keyboards/ai03/orbit/split_util.c
+++ /dev/null
@@ -1,87 +0,0 @@
-#include "split_util.h"
-#include "matrix.h"
-#include "keyboard.h"
-#include "config.h"
-#include "timer.h"
-#include "split_flags.h"
-#include "transport.h"
-#include "quantum.h"
-
-#ifdef EE_HANDS
-# include "eeprom.h"
-# include "eeconfig.h"
-#endif
-
-volatile bool isLeftHand = true;
-
-__attribute__((weak))
-bool is_keyboard_left(void) {
- #ifdef SPLIT_HAND_PIN
- // Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand
- setPinInput(SPLIT_HAND_PIN);
- return readPin(SPLIT_HAND_PIN);
- #else
- #ifdef EE_HANDS
- return eeprom_read_byte(EECONFIG_HANDEDNESS);
- #else
- #ifdef MASTER_RIGHT
- return !is_keyboard_master();
- #else
- return is_keyboard_master();
- #endif
- #endif
- #endif
-}
-
-bool is_keyboard_master(void)
-{
-#ifdef __AVR__
- static enum { UNKNOWN, MASTER, SLAVE } usbstate = UNKNOWN;
-
- // only check once, as this is called often
- if (usbstate == UNKNOWN)
- {
- USBCON |= (1 << OTGPADE); // enables VBUS pad
- wait_us(5);
-
- usbstate = (USBSTA & (1 << VBUS)) ? MASTER : SLAVE; // checks state of VBUS
- }
-
- return (usbstate == MASTER);
-#else
- return true;
-#endif
-}
-
-static void keyboard_master_setup(void) {
-#if defined(USE_I2C)
- #ifdef SSD1306OLED
- matrix_master_OLED_init ();
- #endif
-#endif
- transport_master_init();
-
- // For master the Backlight info needs to be sent on startup
- // Otherwise the salve won't start with the proper info until an update
- BACKLIT_DIRTY = true;
-}
-
-static void keyboard_slave_setup(void)
-{
- transport_slave_init();
-}
-
-// this code runs before the usb and keyboard is initialized
-void matrix_setup(void)
-{
- isLeftHand = is_keyboard_left();
-
- if (is_keyboard_master())
- {
- keyboard_master_setup();
- }
- else
- {
- keyboard_slave_setup();
- }
-}
diff --git a/keyboards/ai03/orbit/split_util.h b/keyboards/ai03/orbit/split_util.h
deleted file mode 100644
index 20f7535bf4..0000000000
--- a/keyboards/ai03/orbit/split_util.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#pragma once
-
-#include <stdbool.h>
-#include <stdint.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-extern volatile bool isLeftHand;
-
-void matrix_master_OLED_init (void);
diff --git a/keyboards/ai03/orbit/transport.c b/keyboards/ai03/orbit/transport.c
deleted file mode 100644
index 447fafed14..0000000000
--- a/keyboards/ai03/orbit/transport.c
+++ /dev/null
@@ -1,238 +0,0 @@
-
-#include "transport.h"
-
-#include "config.h"
-#include "matrix.h"
-#include "quantum.h"
-
-#include "orbit.h"
-
-#define ROWS_PER_HAND (MATRIX_ROWS/2)
-
-#ifdef RGBLIGHT_ENABLE
-# include "rgblight.h"
-#endif
-
-#ifdef BACKLIGHT_ENABLE
-# include "backlight.h"
- extern backlight_config_t backlight_config;
-#endif
-
-#if defined(USE_I2C)
-
-#include "i2c.h"
-
-#ifndef SLAVE_I2C_ADDRESS
-# define SLAVE_I2C_ADDRESS 0x32
-#endif
-
-#if (MATRIX_COLS > 8)
-# error "Currently only supports 8 COLS"
-#endif
-
-// Get rows from other half over i2c
-bool transport_master(matrix_row_t matrix[]) {
- int err = 0;
-
- // write backlight info
-#ifdef BACKLIGHT_ENABLE
- if (BACKLIT_DIRTY) {
- err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
- if (err) { goto i2c_error; }
-
- // Backlight location
- err = i2c_master_write(I2C_BACKLIT_START);
- if (err) { goto i2c_error; }
-
- // Write backlight
- i2c_master_write(get_backlight_level());
-
- BACKLIT_DIRTY = false;
- }
-#endif
-
- err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
- if (err) { goto i2c_error; }
-
- // start of matrix stored at I2C_KEYMAP_START
- err = i2c_master_write(I2C_KEYMAP_START);
- if (err) { goto i2c_error; }
-
- // Start read
- err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
- if (err) { goto i2c_error; }
-
- if (!err) {
- int i;
- for (i = 0; i < ROWS_PER_HAND-1; ++i) {
- matrix[i] = i2c_master_read(I2C_ACK);
- }
- matrix[i] = i2c_master_read(I2C_NACK);
- i2c_master_stop();
- } else {
-i2c_error: // the cable is disconnceted, or something else went wrong
- i2c_reset_state();
- return false;
- }
-
-#ifdef RGBLIGHT_ENABLE
- if (RGB_DIRTY) {
- err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
- if (err) { goto i2c_error; }
-
- // RGB Location
- err = i2c_master_write(I2C_RGB_START);
- if (err) { goto i2c_error; }
-
- uint32_t dword = eeconfig_read_rgblight();
-
- // Write RGB
- err = i2c_master_write_data(&dword, 4);
- if (err) { goto i2c_error; }
-
- RGB_DIRTY = false;
- i2c_master_stop();
- }
-#endif
-
- return true;
-}
-
-void transport_slave(matrix_row_t matrix[]) {
-
- for (int i = 0; i < ROWS_PER_HAND; ++i)
- {
- i2c_slave_buffer[I2C_KEYMAP_START + i] = matrix[i];
- }
- // Read Backlight Info
- #ifdef BACKLIGHT_ENABLE
- if (BACKLIT_DIRTY)
- {
- backlight_set(i2c_slave_buffer[I2C_BACKLIT_START]);
- BACKLIT_DIRTY = false;
- }
- #endif
- #ifdef RGBLIGHT_ENABLE
- if (RGB_DIRTY)
- {
- // Disable interupts (RGB data is big)
- cli();
- // Create new DWORD for RGB data
- uint32_t dword;
-
- // Fill the new DWORD with the data that was sent over
- uint8_t * dword_dat = (uint8_t *)(&dword);
- for (int i = 0; i < 4; i++)
- {
- dword_dat[i] = i2c_slave_buffer[I2C_RGB_START + i];
- }
-
- // Update the RGB now with the new data and set RGB_DIRTY to false
- rgblight_update_dword(dword);
- RGB_DIRTY = false;
- // Re-enable interupts now that RGB is set
- sei();
- }
- #endif
-}
-
-void transport_master_init(void) {
- i2c_master_init();
-}
-
-void transport_slave_init(void) {
- i2c_slave_init(SLAVE_I2C_ADDRESS);
-}
-
-#else // USE_SERIAL
-
-#include "serial.h"
-
-
-
-volatile Serial_s2m_buffer_t serial_s2m_buffer = {};
-volatile Serial_m2s_buffer_t serial_m2s_buffer = {};
-uint8_t volatile status0 = 0;
-
-SSTD_t transactions[] = {
- { (uint8_t *)&status0,
- sizeof(serial_m2s_buffer), (uint8_t *)&serial_m2s_buffer,
- sizeof(serial_s2m_buffer), (uint8_t *)&serial_s2m_buffer
- }
-};
-
-uint8_t slave_layer_cache;
-uint8_t slave_nlock_cache;
-uint8_t slave_clock_cache;
-uint8_t slave_slock_cache;
-
-void transport_master_init(void)
-{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); }
-
-void transport_slave_init(void)
-{
- soft_serial_target_init(transactions, TID_LIMIT(transactions));
- slave_layer_cache = 255;
- slave_nlock_cache = 255;
- slave_clock_cache = 255;
- slave_slock_cache = 255;
-}
-
-bool transport_master(matrix_row_t matrix[]) {
-
- if (soft_serial_transaction()) {
- return false;
- }
-
- // TODO: if MATRIX_COLS > 8 change to unpack()
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- matrix[i] = serial_s2m_buffer.smatrix[i];
- }
-
- #if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
- // Code to send RGB over serial goes here (not implemented yet)
- #endif
-
- #ifdef BACKLIGHT_ENABLE
- // Write backlight level for slave to read
- serial_m2s_buffer.backlight_level = backlight_config.enable ? backlight_config.level : 0;
- #endif
-
- return true;
-}
-
-void transport_slave(matrix_row_t matrix[]) {
-
- // TODO: if MATRIX_COLS > 8 change to pack()
- for (int i = 0; i < ROWS_PER_HAND; ++i)
- {
- serial_s2m_buffer.smatrix[i] = matrix[i];
- }
- #ifdef BACKLIGHT_ENABLE
- backlight_set(serial_m2s_buffer.backlight_level);
- #endif
- #if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
- // Add serial implementation for RGB here
- #endif
-
- if (slave_layer_cache != serial_m2s_buffer.current_layer) {
- slave_layer_cache = serial_m2s_buffer.current_layer;
- set_layer_indicators(slave_layer_cache);
- }
-
- if (slave_nlock_cache != serial_m2s_buffer.nlock_led) {
- slave_nlock_cache = serial_m2s_buffer.nlock_led;
- led_toggle(3, slave_nlock_cache);
- }
- if (slave_clock_cache != serial_m2s_buffer.clock_led) {
- slave_clock_cache = serial_m2s_buffer.clock_led;
- led_toggle(4, slave_clock_cache);
- }
- if (slave_slock_cache != serial_m2s_buffer.slock_led) {
- slave_slock_cache = serial_m2s_buffer.slock_led;
- led_toggle(5, slave_slock_cache);
- }
-
-}
-
-#endif
diff --git a/keyboards/ai03/orbit/transport.h b/keyboards/ai03/orbit/transport.h
deleted file mode 100644
index 757eae6f5c..0000000000
--- a/keyboards/ai03/orbit/transport.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#pragma once
-
-#include "matrix.h"
-
-#define ROWS_PER_HAND (MATRIX_ROWS/2)
-
-typedef struct _Serial_s2m_buffer_t {
- // TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack
- matrix_row_t smatrix[ROWS_PER_HAND];
-} Serial_s2m_buffer_t;
-
-typedef struct _Serial_m2s_buffer_t {
-#ifdef BACKLIGHT_ENABLE
- uint8_t backlight_level;
-#endif
-#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
- rgblight_config_t rgblight_config; //not yet use
- //
- // When MCUs on both sides drive their respective RGB LED chains,
- // it is necessary to synchronize, so it is necessary to communicate RGB information.
- // In that case, define the RGBLIGHT_SPLIT macro.
- //
- // Otherwise, if the master side MCU drives both sides RGB LED chains,
- // there is no need to communicate.
-#endif
-
- uint8_t current_layer;
- uint8_t nlock_led;
- uint8_t clock_led;
- uint8_t slock_led;
-
-} Serial_m2s_buffer_t;
-
-extern volatile Serial_s2m_buffer_t serial_s2m_buffer;
-extern volatile Serial_m2s_buffer_t serial_m2s_buffer;
-
-void transport_master_init(void);
-void transport_slave_init(void);
-
-// returns false if valid data not received from slave
-bool transport_master(matrix_row_t matrix[]);
-void transport_slave(matrix_row_t matrix[]);