summaryrefslogtreecommitdiff
path: root/drivers/chibios/serial_usart.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/chibios/serial_usart.h')
-rw-r--r--drivers/chibios/serial_usart.h116
1 files changed, 0 insertions, 116 deletions
diff --git a/drivers/chibios/serial_usart.h b/drivers/chibios/serial_usart.h
deleted file mode 100644
index c64e15566f..0000000000
--- a/drivers/chibios/serial_usart.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/* Copyright 2021 QMK
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-#include "quantum.h"
-#include "serial.h"
-#include "printf.h"
-
-#include <ch.h>
-#include <hal.h>
-
-#if !defined(SERIAL_USART_DRIVER)
-# define SERIAL_USART_DRIVER SD1
-#endif
-
-#if !defined(USE_GPIOV1)
-/* The default PAL alternate modes are used to signal that the pins are used for USART. */
-# if !defined(SERIAL_USART_TX_PAL_MODE)
-# define SERIAL_USART_TX_PAL_MODE 7
-# endif
-# if !defined(SERIAL_USART_RX_PAL_MODE)
-# define SERIAL_USART_RX_PAL_MODE 7
-# endif
-#endif
-
-#if defined(SOFT_SERIAL_PIN)
-# define SERIAL_USART_TX_PIN SOFT_SERIAL_PIN
-#endif
-
-#if !defined(SERIAL_USART_TX_PIN)
-# define SERIAL_USART_TX_PIN A9
-#endif
-
-#if !defined(SERIAL_USART_RX_PIN)
-# define SERIAL_USART_RX_PIN A10
-#endif
-
-#if !defined(USART_CR1_M0)
-# define USART_CR1_M0 USART_CR1_M // some platforms (f1xx) dont have this so
-#endif
-
-#if !defined(SERIAL_USART_CR1)
-# define SERIAL_USART_CR1 (USART_CR1_PCE | USART_CR1_PS | USART_CR1_M0) // parity enable, odd parity, 9 bit length
-#endif
-
-#if !defined(SERIAL_USART_CR2)
-# define SERIAL_USART_CR2 (USART_CR2_STOP_1) // 2 stop bits
-#endif
-
-#if !defined(SERIAL_USART_CR3)
-# define SERIAL_USART_CR3 0
-#endif
-
-#if defined(USART1_REMAP)
-# define USART_REMAP \
- do { \
- (AFIO->MAPR |= AFIO_MAPR_USART1_REMAP); \
- } while (0)
-#elif defined(USART2_REMAP)
-# define USART_REMAP \
- do { \
- (AFIO->MAPR |= AFIO_MAPR_USART2_REMAP); \
- } while (0)
-#elif defined(USART3_PARTIALREMAP)
-# define USART_REMAP \
- do { \
- (AFIO->MAPR |= AFIO_MAPR_USART3_REMAP_PARTIALREMAP); \
- } while (0)
-#elif defined(USART3_FULLREMAP)
-# define USART_REMAP \
- do { \
- (AFIO->MAPR |= AFIO_MAPR_USART3_REMAP_FULLREMAP); \
- } while (0)
-#endif
-
-#if !defined(SELECT_SOFT_SERIAL_SPEED)
-# define SELECT_SOFT_SERIAL_SPEED 1
-#endif
-
-#if defined(SERIAL_USART_SPEED)
-// Allow advanced users to directly set SERIAL_USART_SPEED
-#elif SELECT_SOFT_SERIAL_SPEED == 0
-# define SERIAL_USART_SPEED 460800
-#elif SELECT_SOFT_SERIAL_SPEED == 1
-# define SERIAL_USART_SPEED 230400
-#elif SELECT_SOFT_SERIAL_SPEED == 2
-# define SERIAL_USART_SPEED 115200
-#elif SELECT_SOFT_SERIAL_SPEED == 3
-# define SERIAL_USART_SPEED 57600
-#elif SELECT_SOFT_SERIAL_SPEED == 4
-# define SERIAL_USART_SPEED 38400
-#elif SELECT_SOFT_SERIAL_SPEED == 5
-# define SERIAL_USART_SPEED 19200
-#else
-# error invalid SELECT_SOFT_SERIAL_SPEED value
-#endif
-
-#if !defined(SERIAL_USART_TIMEOUT)
-# define SERIAL_USART_TIMEOUT 100
-#endif
-
-#define HANDSHAKE_MAGIC 7