summaryrefslogtreecommitdiff
path: root/docs
diff options
context:
space:
mode:
Diffstat (limited to 'docs')
-rw-r--r--docs/internals_gpio_control.md21
1 files changed, 10 insertions, 11 deletions
diff --git a/docs/internals_gpio_control.md b/docs/internals_gpio_control.md
index 51a549f1c9..8b8351382d 100644
--- a/docs/internals_gpio_control.md
+++ b/docs/internals_gpio_control.md
@@ -6,18 +6,17 @@ QMK has a GPIO control abstraction layer which is microcontroller agnostic. This
The following functions can provide basic control of GPIOs and are found in `quantum/quantum.h`.
-|Function |Description |
-|----------------------|------------------------------------------------------------------|
-|`setPinInput(pin)` |Set pin as input with high impedance (High-Z) |
-|`setPinInputHigh(pin)`|Set pin as input with build in pull-up |
-|`setPinInputLow(pin)` |Set pin as input with build in pull-down (Supported only on STM32)|
-|`setPinOutput(pin)` |Set pin as output |
-|`writePinHigh(pin)` |Set pin level as high, assuming it is an output |
-|`writePinLow(pin)` |Set pin level as low, assuming it is an output |
-|`writePin(pin, level)`|Set pin level, assuming it is an output |
-|`readPin(pin)` |Returns the level of the pin |
+|Function |Description | Old AVR Examples | Old ChibiOS/ARM Examples |
+|----------------------|------------------------------------------------------------------|------------------------------------------------|-------------------------------------------------|
+|`setPinInput(pin)` |Set pin as input with high impedance (High-Z) | `DDRB &= ~(1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT)` |
+|`setPinInputHigh(pin)`|Set pin as input with builtin pull-up resistor | `DDRB &= ~(1<<2); PORTB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)` |
+|`setPinInputLow(pin)` |Set pin as input with builtin pull-down resistor | N/A (Not supported on AVR) | `palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)` |
+|`setPinOutput(pin)` |Set pin as output | `DDRB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)` |
+|`writePinHigh(pin)` |Set pin level as high, assuming it is an output | `PORTB \|= (1<<2)` | `palSetLine(pin)` |
+|`writePinLow(pin)` |Set pin level as low, assuming it is an output | `PORTB &= ~(1<<2)` | `palClearLine(pin)` |
+|`writePin(pin, level)`|Set pin level, assuming it is an output | `(level) ? PORTB \|= (1<<2) : PORTB &= ~(1<<2)` | `(level) ? palSetLine(pin) : palClearLine(pin)` |
+|`readPin(pin)` |Returns the level of the pin | `_SFR_IO8(pin >> 4) & _BV(pin & 0xF)` | `palReadLine(pin)` |
## Advanced Settings
Each microcontroller can have multiple advanced settings regarding its GPIO. This abstraction layer does not limit the use of architecture-specific functions. Advanced users should consult the datasheet of their desired device and include any needed libraries. For AVR, the standard avr/io.h library is used; for STM32, the ChibiOS [PAL library](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html) is used.
-