summaryrefslogtreecommitdiff
path: root/converter/ps2_usb
diff options
context:
space:
mode:
Diffstat (limited to 'converter/ps2_usb')
-rw-r--r--converter/ps2_usb/Makefile105
-rw-r--r--converter/ps2_usb/Makefile.mbed46
-rw-r--r--converter/ps2_usb/Makefile.pjrc75
-rw-r--r--converter/ps2_usb/Makefile.tmk_rev198
-rw-r--r--converter/ps2_usb/Makefile.tmk_rev298
-rw-r--r--converter/ps2_usb/Makefile.vusb107
-rw-r--r--converter/ps2_usb/README.md84
-rw-r--r--converter/ps2_usb/config.h173
-rw-r--r--converter/ps2_usb/config_mbed.h60
-rw-r--r--converter/ps2_usb/config_tmk_rev1.h147
-rw-r--r--converter/ps2_usb/config_tmk_rev2.h85
-rw-r--r--converter/ps2_usb/keymap_common.c31
-rw-r--r--converter/ps2_usb/keymap_common.h173
-rw-r--r--converter/ps2_usb/keymap_jis.c34
-rw-r--r--converter/ps2_usb/keymap_plain.c32
-rw-r--r--converter/ps2_usb/keymap_spacefn.c61
-rw-r--r--converter/ps2_usb/led.c33
-rw-r--r--converter/ps2_usb/main.cpp46
-rw-r--r--converter/ps2_usb/matrix.c486
-rw-r--r--converter/ps2_usb/usbconfig.h377
20 files changed, 2351 insertions, 0 deletions
diff --git a/converter/ps2_usb/Makefile b/converter/ps2_usb/Makefile
new file mode 100644
index 0000000000..39455defdf
--- /dev/null
+++ b/converter/ps2_usb/Makefile
@@ -0,0 +1,105 @@
+#
+# Makefile for Teensy
+#
+# Target file name (without extension).
+TARGET = ps2_usb_lufa
+
+# Directory common source filess exist
+TMK_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# project specific files
+SRC = keymap_common.c \
+ matrix.c \
+ led.c
+
+ifdef KEYMAP
+ SRC := keymap_$(KEYMAP).c $(SRC)
+else
+ SRC := keymap_plain.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+# comment out to disable the options.
+#
+#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
+
+
+# PS/2 Options
+#
+PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened)
+#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
+#PS2_USE_BUSYWAIT = yes # uses primitive reference code
+
+
+# Optimize size but this may cause error "relocation truncated to fit"
+#EXTRALDFLAGS = -Wl,--relax
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TMK_DIR)
+
+include $(TMK_DIR)/protocol.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/converter/ps2_usb/Makefile.mbed b/converter/ps2_usb/Makefile.mbed
new file mode 100644
index 0000000000..ff8a0de7a4
--- /dev/null
+++ b/converter/ps2_usb/Makefile.mbed
@@ -0,0 +1,46 @@
+PROJECT = ps2_usb
+
+TMK_DIR = ../..
+MBED_DIR = $(TMK_DIR)/mbed-sdk
+
+#VPATH += $(MBED_DIR):$(TMK_DIR)
+vpath %.s .:$(MBED_DIR):$(TMK_DIR)
+vpath %.c .:$(MBED_DIR):$(TMK_DIR)
+vpath %.cpp .:$(MBED_DIR):$(TMK_DIR)
+
+OBJDIR = ./build
+
+OBJECTS = \
+ $(OBJDIR)/protocol/ps2_busywait.o \
+ $(OBJDIR)/protocol/ps2_io_mbed.o \
+ $(OBJDIR)/./keymap_common.o \
+ $(OBJDIR)/./matrix.o \
+ $(OBJDIR)/./led.o \
+ $(OBJDIR)/./main.o
+
+ifdef KEYMAP
+ OBJECTS := $(OBJDIR)/keymap_$(KEYMAP).o $(OBJECTS)
+else
+ OBJECTS := $(OBJDIR)/keymap_plain.o $(OBJECTS)
+endif
+
+CONFIG_H = config_mbed.h
+
+SYS_OBJECTS =
+
+INCLUDE_PATHS = -I.
+
+LIBRARY_PATHS =
+LIBRARIES =
+
+# Build Options
+# Comment out to disable
+#BOOTMAGIC_ENABLE = yes
+MOUSEKEY_ENABLE = yes
+
+
+#include $(TMK_DIR)/tool/mbed/mk20d50m.mk
+include $(TMK_DIR)/tool/mbed/lpc11u35_501.mk
+include $(TMK_DIR)/tool/mbed/mbed.mk
+include $(TMK_DIR)/tool/mbed/common.mk
+include $(TMK_DIR)/tool/mbed/gcc.mk
diff --git a/converter/ps2_usb/Makefile.pjrc b/converter/ps2_usb/Makefile.pjrc
new file mode 100644
index 0000000000..2aa2a8dc3b
--- /dev/null
+++ b/converter/ps2_usb/Makefile.pjrc
@@ -0,0 +1,75 @@
+# Target file name (without extension).
+TARGET = ps2_usb_pjrc
+
+# Directory common source filess exist
+TMK_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC = keymap_common.c \
+ matrix.c \
+ led.c
+
+ifdef KEYMAP
+ SRC := keymap_$(KEYMAP).c $(SRC)
+else
+ SRC := keymap_plain.c $(SRC)
+endif
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162 # Teensy 1.0
+MCU = atmega32u4 # Teensy 2.0
+#MCU = at90usb646 # Teensy++ 1.0
+#MCU = at90usb1286 # Teensy++ 2.0
+
+
+# Processor frequency.
+# Normally the first thing your program should do is set the clock prescaler,
+# so your program will run at the correct speed. You should also set this
+# variable to same clock speed. The _delay_ms() macro uses this, and many
+# examples use this variable to calculate timings. Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# *Comment out* to disable the options.
+#
+#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = yes # USB Nkey Rollover
+
+
+# PS/2 Options
+#
+#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened)
+#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
+PS2_USE_BUSYWAIT = yes # uses primitive reference code
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TMK_DIR)
+
+
+include $(TMK_DIR)/protocol.mk
+include $(TMK_DIR)/protocol/pjrc.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/converter/ps2_usb/Makefile.tmk_rev1 b/converter/ps2_usb/Makefile.tmk_rev1
new file mode 100644
index 0000000000..8b227c2f64
--- /dev/null
+++ b/converter/ps2_usb/Makefile.tmk_rev1
@@ -0,0 +1,98 @@
+#
+# Makefile for TMK keyboard converter rev2
+# https://github.com/tmk/keyboard_converter#pcb-rev1
+#
+# Target file name (without extension).
+TARGET = ps2_usb_tmk_rev1
+
+# Directory common source filess exist
+TMK_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# project specific files
+SRC = keymap_common.c \
+ matrix.c \
+ led.c
+
+ifdef KEYMAP
+ SRC := keymap_$(KEYMAP).c $(SRC)
+else
+ SRC := keymap_plain.c $(SRC)
+endif
+
+CONFIG_H = config_tmk_rev1.h
+
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
+
+
+# PS/2 Options
+#
+PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened)
+#PS2_USE_BUSYWAIT = yes # uses primitive reference code
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TMK_DIR)
+
+include $(TMK_DIR)/protocol.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/converter/ps2_usb/Makefile.tmk_rev2 b/converter/ps2_usb/Makefile.tmk_rev2
new file mode 100644
index 0000000000..93e2266151
--- /dev/null
+++ b/converter/ps2_usb/Makefile.tmk_rev2
@@ -0,0 +1,98 @@
+#
+# Makefile for TMK keyboard converter rev2
+# https://github.com/tmk/keyboard_converter#pcb-rev2
+#
+# Target file name (without extension).
+TARGET = ps2_usb_tmk_rev2
+
+# Directory common source filess exist
+TMK_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# project specific files
+SRC = keymap_common.c \
+ matrix.c \
+ led.c
+
+ifdef KEYMAP
+ SRC := keymap_$(KEYMAP).c $(SRC)
+else
+ SRC := keymap_plain.c $(SRC)
+endif
+
+CONFIG_H = config_tmk_rev2.h
+
+
+# MCU name
+MCU = atmega32u2
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
+
+
+# PS/2 Options
+#
+PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
+#PS2_USE_BUSYWAIT = yes # uses primitive reference code
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TMK_DIR)
+
+include $(TMK_DIR)/protocol.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/converter/ps2_usb/Makefile.vusb b/converter/ps2_usb/Makefile.vusb
new file mode 100644
index 0000000000..facee69056
--- /dev/null
+++ b/converter/ps2_usb/Makefile.vusb
@@ -0,0 +1,107 @@
+# Target file name (without extension).
+TARGET = ps2_usb_vusb
+
+# Directory common source filess exist
+TMK_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC = keymap_common.c \
+ matrix.c \
+ led.c
+
+ifdef KEYMAP
+ SRC := keymap_$(KEYMAP).c $(SRC)
+else
+ SRC := keymap_plain.c $(SRC)
+endif
+
+# Use USART for PS/2. With V-USB INT and BUSYWAIT code is not useful.
+SRC += protocol/ps2_usart.c
+OPT_DEFS += -DPS2_USE_USART
+
+CONFIG_H = config.h
+
+
+# V-USB debug level: To use ps2_usart.c level must be 0
+# ps2_usart.c requires USART to receive PS/2 signal.
+OPT_DEFS += -DDEBUG_LEVEL=0
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162 # Teensy 1.0
+#MCU = atmega32u4 # Teensy 2.0
+#MCU = at90usb646 # Teensy++ 1.0
+#MCU = at90usb1286 # Teensy++ 2.0
+MCU = atmega168
+
+
+# Processor frequency.
+# Normally the first thing your program should do is set the clock prescaler,
+# so your program will run at the correct speed. You should also set this
+# variable to same clock speed. The _delay_ms() macro uses this, and many
+# examples use this variable to calculate timings. Do not add a "UL" here.
+F_CPU = 20000000
+
+
+# Build Options
+# comment out to disable the options.
+#
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+#NKRO_ENABLE = yes # USB Nkey Rollover
+NO_UART = yes # UART is unavailable
+
+
+
+#---------------- Programming Options --------------------------
+AVRDUDE = avrdude
+# Type: avrdude -c ? to get a full listing.
+AVRDUDE_PROGRAMMER = usbasp
+AVRDUDE_PORT =
+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+
+# Uncomment the following if you want avrdude's erase cycle counter.
+# Note that this counter needs to be initialized first using -Yn,
+# see avrdude manual.
+#AVRDUDE_ERASE_COUNTER = -y
+
+# Uncomment the following if you do /not/ wish a verification to be
+# performed after programming the device.
+#AVRDUDE_NO_VERIFY = -V
+
+# Increase verbosity level. Please use this when submitting bug
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
+# to submit bug reports.
+#AVRDUDE_VERBOSE = -v -v
+
+#AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
+
+PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+
+
+# Boot Section Size in bytes
+# Teensy halfKay 512
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBasp 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=2048
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TMK_DIR)
+
+
+include $(TMK_DIR)/protocol.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/protocol/vusb.mk
+include $(TMK_DIR)/rules.mk
diff --git a/converter/ps2_usb/README.md b/converter/ps2_usb/README.md
new file mode 100644
index 0000000000..8a535949d8
--- /dev/null
+++ b/converter/ps2_usb/README.md
@@ -0,0 +1,84 @@
+PS/2 to USB keyboard converter
+==============================
+This firmware converts PS/2 keyboard protocol to USB.(It supports Scan Code Set 2.)
+
+
+Connect Wires
+-------------
+In case of Teensy2.0(ATMega32U4):
+
+1. Connect **Vcc** and **GND**.
+2. Connect **Clock** and **Data** line.
+ - **Interrupt**: **Clock** is on `PD1` and **Data** on `PD0`.(Recommended. Soarer's converter compatible)
+ - **Busywait**: **Clock** is on `PD1` and **Data** on `PD0`.
+ - **USART**: **Clock** is on `PD5` and **Data** on `PD2`.
+3. Optionally you need pull-up resistor. 1K-10K Ohm is OK.
+
+To change pin configuration edit config.h.
+
+
+Build Firmware
+--------------
+For **PJRC Teensy** just run `make`:
+
+ $ make clean
+ $ make
+
+To select keymap:
+
+ $ make clean
+ $ make KEYMAP=[plain|jis|spacefn|...]
+
+After that you will find HEX file `ps2_usb_lufa.hex` in current directory.
+
+
+- For **TMK converter Rev.1** use `make -f Makefile.tmk_rev1` instead of `make` and HEX file is `ps2_usb_tmk_rev1.hex`.
+
+- For **TMK converter Rev.2** use `make -f Makefile.tmk_rev2` instead of `make` and HEX file is `ps2_usb_tmk_rev2.hex`.
+
+
+Keymap
+------
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document(you can find in README.md of top directory) and existent keymap files.
+
+
+PS/2 signal handling implementations
+------------------------------------
+Following three methods can be used to implement PS/2 signal handling.
+
+### Simple and stupid busy-wait(ps2_busywait.c)
+ This is expected to implemented with portable C code for reference.
+### Interrupt driven(ps2_interrupt.c)
+ Uses pin interrupt to detect falling edge of clock line.
+### USART hardware module(ps2_usart.c)
+ Uses AVR USART engine to receive PS/2 signal.
+
+To select method edit Makefile.
+
+
+V-USB Support
+-------------
+With V-USB you can use this converter on ATmega(168/328) but it doesn't support NKRO at this time.
+
+Circuit:
+
+ +---+ +---------------+
+ USB GND | | ATmega168 |
+ === C3 | |
+ 5V <-------+--------+---|Vcc,AVCC | PS/2
+ R1 | | ====
+ D- <----+--+-----R2-----|INT1 RXD|------->DATA
+ D+ <----|---+----R3-----|INT0 XCK|------->CLOCK
+ Z1 Z2 | | ->5V
+ GND<----+---+--+--+-----|GND | ->GND
+ | | | |
+ | C2-+--|XTAL1 |
+ | X1 | |
+ +--C3-+--|XTAL2 |
+ +---------------+
+ R1: 1.5K Ohm
+ R2,R3: 68 Ohm
+ Z1,Z2: Zenner 3.6V
+ C1,C2: 22pF
+ C3: 0.1uF
+ X1: Crystal 20MHz(16MHz/12MHz)
diff --git a/converter/ps2_usb/config.h b/converter/ps2_usb/config.h
new file mode 100644
index 0000000000..c9bab1b072
--- /dev/null
+++ b/converter/ps2_usb/config.h
@@ -0,0 +1,173 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include <avr/interrupt.h>
+
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6512
+#define DEVICE_VER 0x0001
+#define MANUFACTURER t.m.k.
+#define PRODUCT PS/2 keyboard converter
+#define DESCRIPTION convert PS/2 keyboard to USB
+
+
+/* matrix size */
+#define MATRIX_ROWS 32 // keycode bit: 3-0
+#define MATRIX_COLS 8 // keycode bit: 6-4
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) || \
+ keyboard_report->mods == (MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RSHIFT)) \
+)
+
+
+//#define NO_SUSPEND_POWER_DOWN
+
+
+/*
+ * PS/2 Busywait
+ */
+#ifdef PS2_USE_BUSYWAIT
+#define PS2_CLOCK_PORT PORTD
+#define PS2_CLOCK_PIN PIND
+#define PS2_CLOCK_DDR DDRD
+#define PS2_CLOCK_BIT 5
+#define PS2_DATA_PORT PORTD
+#define PS2_DATA_PIN PIND
+#define PS2_DATA_DDR DDRD
+#define PS2_DATA_BIT 2
+#endif
+
+/*
+ * PS/2 Pin interrupt
+ */
+#ifdef PS2_USE_INT
+/* uses INT1 for clock line(ATMega32U4) */
+#define PS2_CLOCK_PORT PORTD
+#define PS2_CLOCK_PIN PIND
+#define PS2_CLOCK_DDR DDRD
+#define PS2_CLOCK_BIT 1
+#define PS2_DATA_PORT PORTD
+#define PS2_DATA_PIN PIND
+#define PS2_DATA_DDR DDRD
+#define PS2_DATA_BIT 2
+#define PS2_INT_INIT() do { \
+ EICRA |= ((1<<ISC11) | \
+ (0<<ISC10)); \
+} while (0)
+#define PS2_INT_ON() do { \
+ EIMSK |= (1<<INT1); \
+} while (0)
+#define PS2_INT_OFF() do { \
+ EIMSK &= ~(1<<INT1); \
+} while (0)
+#define PS2_INT_VECT INT1_vect
+#endif
+
+/*
+ * PS/2 USART
+ */
+#ifdef PS2_USE_USART
+#if defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)
+/* XCK for clock line and RXD for data line */
+#define PS2_CLOCK_PORT PORTD
+#define PS2_CLOCK_PIN PIND
+#define PS2_CLOCK_DDR DDRD
+#define PS2_CLOCK_BIT 5
+#define PS2_DATA_PORT PORTD
+#define PS2_DATA_PIN PIND
+#define PS2_DATA_DDR DDRD
+#define PS2_DATA_BIT 2
+/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
+/* set DDR of CLOCK as input to be slave */
+#define PS2_USART_INIT() do { \
+ PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \
+ PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \
+ UCSR1C = ((1 << UMSEL10) | \
+ (3 << UPM10) | \
+ (0 << USBS1) | \
+ (3 << UCSZ10) | \
+ (0 << UCPOL1)); \
+ UCSR1A = 0; \
+ UBRR1H = 0; \
+ UBRR1L = 0; \
+} while (0)
+#define PS2_USART_RX_INT_ON() do { \
+ UCSR1B = ((1 << RXCIE1) | \
+ (1 << RXEN1)); \
+} while (0)
+#define PS2_USART_RX_POLL_ON() do { \
+ UCSR1B = (1 << RXEN1); \
+} while (0)
+#define PS2_USART_OFF() do { \
+ UCSR1C = 0; \
+ UCSR1B &= ~((1 << RXEN1) | \
+ (1 << TXEN1)); \
+} while (0)
+#define PS2_USART_RX_READY (UCSR1A & (1<<RXC1))
+#define PS2_USART_RX_DATA UDR1
+#define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
+#define PS2_USART_RX_VECT USART1_RX_vect
+#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__)
+/* XCK for clock line and RXD for data line */
+#define PS2_CLOCK_PORT PORTD
+#define PS2_CLOCK_PIN PIND
+#define PS2_CLOCK_DDR DDRD
+#define PS2_CLOCK_BIT 4
+#define PS2_DATA_PORT PORTD
+#define PS2_DATA_PIN PIND
+#define PS2_DATA_DDR DDRD
+#define PS2_DATA_BIT 0
+/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
+/* set DDR of CLOCK as input to be slave */
+#define PS2_USART_INIT() do { \
+ PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \
+ PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \
+ UCSR0C = ((1 << UMSEL00) | \
+ (3 << UPM00) | \
+ (0 << USBS0) | \
+ (3 << UCSZ00) | \
+ (0 << UCPOL0)); \
+ UCSR0A = 0; \
+ UBRR0H = 0; \
+ UBRR0L = 0; \
+} while (0)
+#define PS2_USART_RX_INT_ON() do { \
+ UCSR0B = ((1 << RXCIE0) | \
+ (1 << RXEN0)); \
+} while (0)
+#define PS2_USART_RX_POLL_ON() do { \
+ UCSR0B = (1 << RXEN0); \
+} while (0)
+#define PS2_USART_OFF() do { \
+ UCSR0C = 0; \
+ UCSR0B &= ~((1 << RXEN0) | \
+ (1 << TXEN0)); \
+} while (0)
+#define PS2_USART_RX_READY (UCSR0A & (1<<RXC0))
+#define PS2_USART_RX_DATA UDR0
+#define PS2_USART_ERROR (UCSR0A & ((1<<FE0) | (1<<DOR0) | (1<<UPE0)))
+#define PS2_USART_RX_VECT USART_RX_vect
+#endif
+#endif
+
+#endif
diff --git a/converter/ps2_usb/config_mbed.h b/converter/ps2_usb/config_mbed.h
new file mode 100644
index 0000000000..5819763e65
--- /dev/null
+++ b/converter/ps2_usb/config_mbed.h
@@ -0,0 +1,60 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_MBED_H
+#define CONFIG_MBED_H
+
+
+#if 0
+// duplicated name against mbed USBDeivce
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6512
+#endif
+#define DEVICE_VER 0x0001
+#define MANUFACTURER t.m.k.
+#define PRODUCT PS/2 keyboard converter
+#define DESCRIPTION convert PS/2 keyboard to USB
+
+
+/* matrix size */
+#define MATRIX_ROWS 32 // keycode bit: 3-0
+#define MATRIX_COLS 8 // keycode bit: 6-4
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) || \
+ keyboard_report->mods == (MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RSHIFT)) \
+)
+
+
+/*
+ * PS/2 Busywait
+ */
+#ifdef PS2_USE_BUSYWAIT
+# define PS2_CLOCK_PORT PORTD
+# define PS2_CLOCK_PIN PIND
+# define PS2_CLOCK_DDR DDRD
+# define PS2_CLOCK_BIT 5
+# define PS2_DATA_PORT PORTD
+# define PS2_DATA_PIN PIND
+# define PS2_DATA_DDR DDRD
+# define PS2_DATA_BIT 2
+#endif
+
+
+#endif
diff --git a/converter/ps2_usb/config_tmk_rev1.h b/converter/ps2_usb/config_tmk_rev1.h
new file mode 100644
index 0000000000..75dc97df38
--- /dev/null
+++ b/converter/ps2_usb/config_tmk_rev1.h
@@ -0,0 +1,147 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include <avr/interrupt.h>
+
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6512
+#define DEVICE_VER 0x0001
+#define MANUFACTURER t.m.k.
+#define PRODUCT PS/2 keyboard converter
+#define DESCRIPTION convert PS/2 keyboard to USB
+
+
+/* matrix size */
+#define MATRIX_ROWS 32 // keycode bit: 3-0
+#define MATRIX_COLS 8 // keycode bit: 6-4
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) || \
+ keyboard_report->mods == (MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RSHIFT)) \
+)
+
+
+//#define NO_SUSPEND_POWER_DOWN
+
+
+/*
+ * PS/2 Busywait
+ */
+#ifdef PS2_USE_BUSYWAIT
+#define PS2_CLOCK_PORT PORTD
+#define PS2_CLOCK_PIN PIND
+#define PS2_CLOCK_DDR DDRD
+#define PS2_CLOCK_BIT 5
+#define PS2_DATA_PORT PORTD
+#define PS2_DATA_PIN PIND
+#define PS2_DATA_DDR DDRD
+#define PS2_DATA_BIT 2
+#endif
+
+/*
+ * PS/2 USART
+ */
+#ifdef PS2_USE_USART
+#if defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)
+/* XCK for clock line and RXD for data line */
+#define PS2_CLOCK_PORT PORTD
+#define PS2_CLOCK_PIN PIND
+#define PS2_CLOCK_DDR DDRD
+#define PS2_CLOCK_BIT 5
+#define PS2_DATA_PORT PORTD
+#define PS2_DATA_PIN PIND
+#define PS2_DATA_DDR DDRD
+#define PS2_DATA_BIT 2
+/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
+/* set DDR of CLOCK as input to be slave */
+#define PS2_USART_INIT() do { \
+ PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \
+ PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \
+ UCSR1C = ((1 << UMSEL10) | \
+ (3 << UPM10) | \
+ (0 << USBS1) | \
+ (3 << UCSZ10) | \
+ (0 << UCPOL1)); \
+ UCSR1A = 0; \
+ UBRR1H = 0; \
+ UBRR1L = 0; \
+} while (0)
+#define PS2_USART_RX_INT_ON() do { \
+ UCSR1B = ((1 << RXCIE1) | \
+ (1 << RXEN1)); \
+} while (0)
+#define PS2_USART_RX_POLL_ON() do { \
+ UCSR1B = (1 << RXEN1); \
+} while (0)
+#define PS2_USART_OFF() do { \
+ UCSR1C = 0; \
+ UCSR1B &= ~((1 << RXEN1) | \
+ (1 << TXEN1)); \
+} while (0)
+#define PS2_USART_RX_READY (UCSR1A & (1<<RXC1))
+#define PS2_USART_RX_DATA UDR1
+#define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1)))
+#define PS2_USART_RX_VECT USART1_RX_vect
+#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__)
+/* XCK for clock line and RXD for data line */
+#define PS2_CLOCK_PORT PORTD
+#define PS2_CLOCK_PIN PIND
+#define PS2_CLOCK_DDR DDRD
+#define PS2_CLOCK_BIT 4
+#define PS2_DATA_PORT PORTD
+#define PS2_DATA_PIN PIND
+#define PS2_DATA_DDR DDRD
+#define PS2_DATA_BIT 0
+/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */
+/* set DDR of CLOCK as input to be slave */
+#define PS2_USART_INIT() do { \
+ PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \
+ PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \
+ UCSR0C = ((1 << UMSEL00) | \
+ (3 << UPM00) | \
+ (0 << USBS0) | \
+ (3 << UCSZ00) | \
+ (0 << UCPOL0)); \
+ UCSR0A = 0; \
+ UBRR0H = 0; \
+ UBRR0L = 0; \
+} while (0)
+#define PS2_USART_RX_INT_ON() do { \
+ UCSR0B = ((1 << RXCIE0) | \
+ (1 << RXEN0)); \
+} while (0)
+#define PS2_USART_RX_POLL_ON() do { \
+ UCSR0B = (1 << RXEN0); \
+} while (0)
+#define PS2_USART_OFF() do { \
+ UCSR0C = 0; \
+ UCSR0B &= ~((1 << RXEN0) | \
+ (1 << TXEN0)); \
+} while (0)
+#define PS2_USART_RX_READY (UCSR0A & (1<<RXC0))
+#define PS2_USART_RX_DATA UDR0
+#define PS2_USART_ERROR (UCSR0A & ((1<<FE0) | (1<<DOR0) | (1<<UPE0)))
+#define PS2_USART_RX_VECT USART_RX_vect
+#endif
+#endif
+
+#endif
diff --git a/converter/ps2_usb/config_tmk_rev2.h b/converter/ps2_usb/config_tmk_rev2.h
new file mode 100644
index 0000000000..2e91838e28
--- /dev/null
+++ b/converter/ps2_usb/config_tmk_rev2.h
@@ -0,0 +1,85 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include <avr/interrupt.h>
+
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6512
+#define DEVICE_VER 0x0001
+#define MANUFACTURER t.m.k.
+#define PRODUCT PS/2 keyboard converter
+#define DESCRIPTION convert PS/2 keyboard to USB
+
+
+/* matrix size */
+#define MATRIX_ROWS 32 // keycode bit: 3-0
+#define MATRIX_COLS 8 // keycode bit: 6-4
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+
+//#define NO_SUSPEND_POWER_DOWN
+
+
+/*
+ * PS/2 Busywait
+ */
+#ifdef PS2_USE_BUSYWAIT
+#define PS2_CLOCK_PORT PORTD
+#define PS2_CLOCK_PIN PIND
+#define PS2_CLOCK_DDR DDRD
+#define PS2_CLOCK_BIT 1
+#define PS2_DATA_PORT PORTD
+#define PS2_DATA_PIN PIND
+#define PS2_DATA_DDR DDRD
+#define PS2_DATA_BIT 0
+#endif
+
+/*
+ * PS/2 Pin interrupt
+ */
+#ifdef PS2_USE_INT
+/* uses INT1 for clock line(ATMega32U4) */
+#define PS2_CLOCK_PORT PORTD
+#define PS2_CLOCK_PIN PIND
+#define PS2_CLOCK_DDR DDRD
+#define PS2_CLOCK_BIT 1
+#define PS2_DATA_PORT PORTD
+#define PS2_DATA_PIN PIND
+#define PS2_DATA_DDR DDRD
+#define PS2_DATA_BIT 0
+#define PS2_INT_INIT() do { \
+ EICRA |= ((1<<ISC11) | \
+ (0<<ISC10)); \
+} while (0)
+#define PS2_INT_ON() do { \
+ EIMSK |= (1<<INT1); \
+} while (0)
+#define PS2_INT_OFF() do { \
+ EIMSK &= ~(1<<INT1); \
+} while (0)
+#define PS2_INT_VECT INT1_vect
+#endif
+
+#endif
diff --git a/converter/ps2_usb/keymap_common.c b/converter/ps2_usb/keymap_common.c
new file mode 100644
index 0000000000..e344fb4167
--- /dev/null
+++ b/converter/ps2_usb/keymap_common.c
@@ -0,0 +1,31 @@
+/*
+Copyright 2011,2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "keymap_common.h"
+#include "progmem.h"
+
+
+/* translates key to keycode */
+uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
+{
+ return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
+}
+
+/* translates Fn keycode to action */
+action_t keymap_fn_to_action(uint8_t keycode)
+{
+ return (action_t){ .code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]) };
+}
diff --git a/converter/ps2_usb/keymap_common.h b/converter/ps2_usb/keymap_common.h
new file mode 100644
index 0000000000..d783e01ded
--- /dev/null
+++ b/converter/ps2_usb/keymap_common.h
@@ -0,0 +1,173 @@
+/*
+Copyright 2011,2012,2013 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef KEYMAP_COMMON_H
+#define KEYMAP_COMMON_H
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "keycode.h"
+#include "action.h"
+#include "action_macro.h"
+#include "report.h"
+#include "print.h"
+#include "debug.h"
+#include "keymap.h"
+
+
+// 32*8(256) byte array which converts PS/2 code into USB code
+extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
+extern const uint16_t fn_actions[];
+
+
+/* All keys */
+#define KEYMAP_ALL( \
+ K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
+ K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
+ K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
+ K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
+ K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
+ K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \
+ \
+ K61, /* for European ISO */ \
+ K51, K13, K6A, K64, K67, /* for Japanese JIS */ \
+ K08, K10, K18, K20, K28, K30, K38, K40, K48, K50, K57, K5F, /* F13-24 */ \
+ KB7, KBF, KDE, /* System Power, Sleep, Wake */ \
+ KA3, KB2, KA1, /* Mute, Volume Up, Volume Down */ \
+ KCD, K95, KBB, KB4, KD0, /* Next, Previous, Stop, Pause, Media Select */ \
+ KC8, KAB, KC0, /* Mail, Calculator, My Computer */ \
+ K90, KBA, KB8, KB0, /* WWW Search, Home, Back, Forward */ \
+ KA8, KA0, K98 /* WWW Stop, Refresh, Favorites */ \
+) { \
+ { KC_NO, KC_##K01, KC_NO, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
+ { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_NO }, \
+ { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_NO }, \
+ { KC_##K18, KC_NO, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_NO }, \
+ { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_NO }, \
+ { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_NO }, \
+ { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_NO }, \
+ { KC_##K38, KC_NO, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_NO }, \
+ { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_NO }, \
+ { KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_NO }, \
+ { KC_##K50, KC_##K51, KC_##K52, KC_NO, KC_##K54, KC_##K55, KC_NO, KC_##K57 }, \
+ { KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_NO, KC_##K5D, KC_NO, KC_##K5F }, \
+ { KC_NO, KC_##K61, KC_NO, KC_NO, KC_##K64, KC_NO, KC_##K66, KC_##K67 }, \
+ { KC_NO, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_NO, KC_NO, KC_NO }, \
+ { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \
+ { KC_##K78, KC_##K79, KC_##K7A, KC_##K7B, KC_##K7C, KC_##K7D, KC_##K7E, KC_NO }, \
+ { KC_NO, KC_NO, KC_NO, KC_##K83, KC_NO, KC_NO, KC_NO, KC_NO }, \
+ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+ { KC_##K90, KC_##K91, KC_NO, KC_NO, KC_##K94, KC_##K95, KC_NO, KC_NO }, \
+ { KC_##K98, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K9F }, \
+ { KC_##KA0, KC_##KA1, KC_NO, KC_##KA3, KC_NO, KC_NO, KC_NO, KC_##KA7 }, \
+ { KC_##KA8, KC_NO, KC_NO, KC_##KAB, KC_NO, KC_NO, KC_NO, KC_##KAF }, \
+ { KC_##KB0, KC_NO, KC_##KB2, KC_NO, KC_##KB4, KC_NO, KC_NO, KC_##KB7 }, \
+ { KC_##KB8, KC_NO, KC_##KBA, KC_##KBB, KC_NO, KC_NO, KC_NO, KC_##KBF }, \
+ { KC_##KC0, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+ { KC_##KC8, KC_NO, KC_##KCA, KC_NO, KC_NO, KC_##KCD, KC_NO, KC_NO }, \
+ { KC_##KD0, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+ { KC_NO, KC_NO, KC_##KDA, KC_NO, KC_NO, KC_NO, KC_##KDE, KC_NO }, \
+ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+ { KC_NO, KC_##KE9, KC_NO, KC_##KEB, KC_##KEC, KC_NO, KC_NO, KC_NO }, \
+ { KC_##KF0, KC_##KF1, KC_##KF2, KC_NO, KC_##KF4, KC_##KF5, KC_NO, KC_NO }, \
+ { KC_NO, KC_NO, KC_##KFA, KC_NO, KC_##KFC, KC_##KFD, KC_##KFE, KC_NO }, \
+}
+
+/* US layout */
+#define KEYMAP( \
+ K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
+ K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
+ K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
+ K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
+ K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
+ K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA \
+) \
+KEYMAP_ALL( \
+ K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
+ K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
+ K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
+ K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
+ K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
+ K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \
+ \
+ NUBS, \
+ RO, KANA, JYEN, HENK, MHEN, \
+ F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, \
+ SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE, \
+ AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN, \
+ MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT, \
+ MAIL, CALCULATOR, MY_COMPUTER, \
+ WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD, \
+ WWW_STOP, WWW_REFRESH, WWW_FAVORITES \
+)
+
+/* ISO layout */
+#define KEYMAP_ISO( \
+ K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
+ K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
+ K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, KF1,KE9,KFA, K6C,K75,K7D, \
+ K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,K5D,K5A, K6B,K73,K74,K79, \
+ K12,K61,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
+ K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA \
+) \
+KEYMAP_ALL( \
+ K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
+ K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
+ K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
+ K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
+ K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
+ K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \
+ \
+ K61, \
+ RO, KANA, JYEN, HENK, MHEN, \
+ F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, \
+ SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE, \
+ AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN, \
+ MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT, \
+ MAIL, CALCULATOR, MY_COMPUTER, \
+ WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD, \
+ WWW_STOP, WWW_REFRESH, WWW_FAVORITES \
+)
+
+/* JIS layout */
+#define KEYMAP_JIS( \
+ K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
+ K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K6A,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
+ K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, KF1,KE9,KFA, K6C,K75,K7D, \
+ K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,K5D, K5A, K6B,K73,K74,K79, \
+ K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,K51, K59, KF5, K69,K72,K7A, \
+ K14,K9F,K11, K67,K29,K64,K13, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA \
+) \
+KEYMAP_ALL( \
+ K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07, KFC,K7E,KFE, \
+ K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \
+ K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \
+ K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \
+ K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \
+ K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA, \
+ \
+ NUBS, \
+ K51, K13, K6A, K64, K67, \
+ F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, \
+ SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE, \
+ AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN, \
+ MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT, \
+ MAIL, CALCULATOR, MY_COMPUTER, \
+ WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD, \
+ WWW_STOP, WWW_REFRESH, WWW_FAVORITES \
+)
+
+#endif
diff --git a/converter/ps2_usb/keymap_jis.c b/converter/ps2_usb/keymap_jis.c
new file mode 100644
index 0000000000..02585150fb
--- /dev/null
+++ b/converter/ps2_usb/keymap_jis.c
@@ -0,0 +1,34 @@
+/*
+ * JIS layout Japanese keyboard
+ */
+#include "keymap_common.h"
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* 0: JIS LAYOUT
+ * ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,-----------.
+ * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|Slp|Wak|
+ * `---' `---------------' `---------------' `---------------' `-----------' `-----------'
+ * ,-----------------------------------------------------------. ,-----------. ,---------------.
+ * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| JY|Bsp| |Ins|Hom|PgU| |NmL| /| *| -|
+ * |-----------------------------------------------------------| |-----------| |---------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| Ret | |Del|End|PgD| | 7| 8| 9| |
+ * |------------------------------------------------------` | `-----------' |-----------| +|
+ * |CapsLo| A| S| D| F| G| H| J| K| L| ;| :| \| | | 4| 5| 6| |
+ * |-----------------------------------------------------------| ,---. |---------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| ,| /| RO|Shift | |Up | | 1| 2| 3| |
+ * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
+ * |Ctrl |Gui |Alt |MHEN| Space |HENK|KANA|Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| | 0| .| |
+ * `-----------------------------------------------------------' `-----------' `---------------'
+ */
+ KEYMAP_JIS(
+ ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
+ GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, DEL, END, PGDN, P7, P8, P9,
+ CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT,BSLS, ENT, P4, P5, P6, PPLS,
+ LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH,RO, RSFT, UP, P1, P2, P3,
+ LCTL,LGUI,LALT, MHEN,SPC, HENK,KANA, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
+ ),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+};
diff --git a/converter/ps2_usb/keymap_plain.c b/converter/ps2_usb/keymap_plain.c
new file mode 100644
index 0000000000..51b2fddb5b
--- /dev/null
+++ b/converter/ps2_usb/keymap_plain.c
@@ -0,0 +1,32 @@
+#include "keymap_common.h"
+
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* 0: default
+ * ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,-----------.
+ * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|Slp|Wak|
+ * `---' `---------------' `---------------' `---------------' `-----------' `-----------'
+ * ,-----------------------------------------------------------. ,-----------. ,---------------.
+ * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| /| *| -|
+ * |-----------------------------------------------------------| |-----------| |---------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| |
+ * |-----------------------------------------------------------| `-----------' |-----------| +|
+ * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| |
+ * |-----------------------------------------------------------| ,---. |---------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| |
+ * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
+ * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| | 0| .| |
+ * `-----------------------------------------------------------' `-----------' `---------------'
+ */
+ KEYMAP(
+ ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
+ GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9,
+ CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS,
+ LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3,
+ LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
+ ),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+};
diff --git a/converter/ps2_usb/keymap_spacefn.c b/converter/ps2_usb/keymap_spacefn.c
new file mode 100644
index 0000000000..bffd2bc606
--- /dev/null
+++ b/converter/ps2_usb/keymap_spacefn.c
@@ -0,0 +1,61 @@
+/*
+ * SpaceFN layout
+ * http://geekhack.org/index.php?topic=51069.0
+ */
+#include "keymap_common.h"
+
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* 0: default
+ * ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,-----------.
+ * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|Slp|Wak|
+ * `---' `---------------' `---------------' `---------------' `-----------' `-----------'
+ * ,-----------------------------------------------------------. ,-----------. ,---------------.
+ * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| /| *| -|
+ * |-----------------------------------------------------------| |-----------| |---------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| |
+ * |-----------------------------------------------------------| `-----------' |-----------| +|
+ * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| |
+ * |-----------------------------------------------------------| ,---. |---------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| |
+ * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
+ * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| | 0| .| |
+ * `-----------------------------------------------------------' `-----------' `---------------'
+ */
+ KEYMAP(
+ ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
+ ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9,
+ CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS,
+ LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3,
+ LCTL,LGUI,LALT, FN0, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT
+ ),
+
+ /* 1: SpaceFN
+ * ,-----------------------------------------------------------.
+ * |` | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
+ * |-----------------------------------------------------------|
+ * | | | |Esc| | | |Hom|Up |End|Psc|Slk|Pau|Ins |
+ * |-----------------------------------------------------------|
+ * | | | | | | |PgU|Lef|Dow|Rig| | | |
+ * |-----------------------------------------------------------|
+ * | | | | | |Spc|PgD|` |~ | |Men| |
+ * |-----------------------------------------------------------|
+ * | | | | | | | | |
+ * `-----------------------------------------------------------'
+ */
+ KEYMAP(
+ ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK,
+ GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
+ TRNS,TRNS,TRNS,ESC, TRNS,TRNS,TRNS,HOME,UP, END, PSCR,SLCK,PAUS,INS, DEL, END, PGDN, P7, P8, P9,
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PGUP,LEFT,DOWN,RGHT,TRNS,TRNS, TRNS, P4, P5, P6, PPLS,
+ TRNS,TRNS,TRNS,TRNS,TRNS,SPC, PGDN,GRV, FN1, TRNS,APP, TRNS, UP, P1, P2, P3,
+ TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS, LEFT,DOWN,RGHT, P0, PDOT,PENT
+ ),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_LAYER_TAP_KEY(1, KC_SPACE),
+ [1] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), // tilde
+};
+
diff --git a/converter/ps2_usb/led.c b/converter/ps2_usb/led.c
new file mode 100644
index 0000000000..e448e84ec7
--- /dev/null
+++ b/converter/ps2_usb/led.c
@@ -0,0 +1,33 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "stdint.h"
+#include "ps2.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+ uint8_t ps2_led = 0;
+ if (usb_led & (1<<USB_LED_SCROLL_LOCK))
+ ps2_led |= (1<<PS2_LED_SCROLL_LOCK);
+ if (usb_led & (1<<USB_LED_NUM_LOCK))
+ ps2_led |= (1<<PS2_LED_NUM_LOCK);
+ if (usb_led & (1<<USB_LED_CAPS_LOCK))
+ ps2_led |= (1<<PS2_LED_CAPS_LOCK);
+ ps2_host_set_led(ps2_led);
+}
diff --git a/converter/ps2_usb/main.cpp b/converter/ps2_usb/main.cpp
new file mode 100644
index 0000000000..860af149a0
--- /dev/null
+++ b/converter/ps2_usb/main.cpp
@@ -0,0 +1,46 @@
+#include "mbed.h"
+#include "debug.h"
+#include "timer.h"
+#include "action.h"
+#include "keycode.h"
+#include "host.h"
+#include "host_driver.h"
+#include "mbed_driver.h"
+
+
+// Button and LEDs of LPC11U35 board
+DigitalIn isp(P0_1); // ISP button
+DigitalOut led_red(P0_20);
+DigitalOut led_green(P0_21);
+
+
+int main(void) {
+ isp.mode(PullUp);
+ led_red = 1;
+ led_green = 0;
+
+ timer_init();
+ host_set_driver(&mbed_driver);
+ keyboard_init();
+
+ //debug_enable = true;
+ xprintf("mbed_onekey ver.eee:\r\n");
+
+
+ bool last_isp = isp;
+ while (1) {
+ keyboard_task();
+
+ //led_green = !led_green;
+ if (last_isp == isp) continue;
+ last_isp = isp;
+ if (last_isp == 0) {
+ led_red = 0; // on
+ dprintf("timer: %i\r\n", timer_read());
+ //register_code(KC_A);
+ } else {
+ led_red = 1; // off
+ //unregister_code(KC_A);
+ }
+ }
+}
diff --git a/converter/ps2_usb/matrix.c b/converter/ps2_usb/matrix.c
new file mode 100644
index 0000000000..45cf2a4a90
--- /dev/null
+++ b/converter/ps2_usb/matrix.c
@@ -0,0 +1,486 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "action.h"
+#include "print.h"
+#include "util.h"
+#include "debug.h"
+#include "ps2.h"
+#include "matrix.h"
+
+
+static void matrix_make(uint8_t code);
+static void matrix_break(uint8_t code);
+static void matrix_clear(void);
+#ifdef MATRIX_HAS_GHOST
+static bool matrix_has_ghost_in_row(uint8_t row);
+#endif
+
+
+/*
+ * Matrix Array usage:
+ * 'Scan Code Set 2' is assigned into 256(32x8)cell matrix.
+ * Hmm, it is very sparse and not efficient :(
+ *
+ * Notes:
+ * Both 'Hanguel/English'(F1) and 'Hanja'(F2) collide with 'Delete'(E0 71) and 'Down'(E0 72).
+ * These two Korean keys need exceptional handling and are not supported for now. Sorry.
+ *
+ * 8bit wide
+ * +---------+
+ * 0| |
+ * :| XX | 00-7F for normal codes(without E0-prefix)
+ * f|_________|
+ * 10| |
+ * :| E0 YY | 80-FF for E0-prefixed codes
+ * 1f| | (<YY>|0x80) is used as matrix position.
+ * +---------+
+ *
+ * Exceptions:
+ * 0x83: F7(0x83) This is a normal code but beyond 0x7F.
+ * 0xFC: PrintScreen
+ * 0xFE: Pause
+ */
+static uint8_t matrix[MATRIX_ROWS];
+#define ROW(code) (code>>3)
+#define COL(code) (code&0x07)
+
+// matrix positions for exceptional keys
+#define F7 (0x83)
+#define PRINT_SCREEN (0xFC)
+#define PAUSE (0xFE)
+
+static bool is_modified = false;
+
+
+inline
+uint8_t matrix_rows(void)
+{
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+ return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+ debug_enable = true;
+ ps2_host_init();
+
+ // initialize matrix state: all keys off
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
+
+ return;
+}
+
+/*
+ * PS/2 Scan Code Set 2: Exceptional Handling
+ *
+ * There are several keys to be handled exceptionally.
+ * The scan code for these keys are varied or prefix/postfix'd
+ * depending on modifier key state.
+ *
+ * Keyboard Scan Code Specification:
+ * http://www.microsoft.com/whdc/archive/scancode.mspx
+ * http://download.microsoft.com/download/1/6/1/161ba512-40e2-4cc9-843a-923143f3456c/scancode.doc
+ *
+ *
+ * 1) Insert, Delete, Home, End, PageUp, PageDown, Up, Down, Right, Left
+ * a) when Num Lock is off
+ * modifiers | make | break
+ * ----------+---------------------------+----------------------
+ * Ohter | <make> | <break>
+ * LShift | E0 F0 12 <make> | <break> E0 12
+ * RShift | E0 F0 59 <make> | <break> E0 59
+ * L+RShift | E0 F0 12 E0 F0 59 <make> | <break> E0 59 E0 12
+ *
+ * b) when Num Lock is on
+ * modifiers | make | break
+ * ----------+---------------------------+----------------------
+ * Other | E0 12 <make> | <break> E0 F0 12
+ * Shift'd | <make> | <break>
+ *
+ * Handling: These prefix/postfix codes are ignored.
+ *
+ *
+ * 2) Keypad /
+ * modifiers | make | break
+ * ----------+---------------------------+----------------------
+ * Ohter | <make> | <break>
+ * LShift | E0 F0 12 <make> | <break> E0 12
+ * RShift | E0 F0 59 <make> | <break> E0 59
+ * L+RShift | E0 F0 12 E0 F0 59 <make> | <break> E0 59 E0 12
+ *
+ * Handling: These prefix/postfix codes are ignored.
+ *
+ *
+ * 3) PrintScreen
+ * modifiers | make | break
+ * ----------+--------------+-----------------------------------
+ * Other | E0 12 E0 7C | E0 F0 7C E0 F0 12
+ * Shift'd | E0 7C | E0 F0 7C
+ * Control'd | E0 7C | E0 F0 7C
+ * Alt'd | 84 | F0 84
+ *
+ * Handling: These prefix/postfix codes are ignored, and both scan codes
+ * 'E0 7C' and 84 are seen as PrintScreen.
+ *
+ * 4) Pause
+ * modifiers | make(no break code)
+ * ----------+--------------------------------------------------
+ * Other | E1 14 77 E1 F0 14 F0 77
+ * Control'd | E0 7E E0 F0 7E
+ *
+ * Handling: Both code sequences are treated as a whole.
+ * And we need a ad hoc 'pseudo break code' hack to get the key off
+ * because it has no break code.
+ *
+ */
+uint8_t matrix_scan(void)
+{
+
+ // scan code reading states
+ static enum {
+ INIT,
+ F0,
+ E0,
+ E0_F0,
+ // Pause
+ E1,
+ E1_14,
+ E1_14_77,
+ E1_14_77_E1,
+ E1_14_77_E1_F0,
+ E1_14_77_E1_F0_14,
+ E1_14_77_E1_F0_14_F0,
+ // Control'd Pause
+ E0_7E,
+ E0_7E_E0,
+ E0_7E_E0_F0,
+ } state = INIT;
+
+
+ is_modified = false;
+
+ // 'pseudo break code' hack
+ if (matrix_is_on(ROW(PAUSE), COL(PAUSE))) {
+ matrix_break(PAUSE);
+ }
+
+ uint8_t code = ps2_host_recv();
+ if (code) xprintf("%i\r\n", code);
+ if (!ps2_error) {
+ switch (state) {
+ case INIT:
+ switch (code) {
+ case 0xE0:
+ state = E0;
+ break;
+ case 0xF0:
+ state = F0;
+ break;
+ case 0xE1:
+ state = E1;
+ break;
+ case 0x83: // F7
+ matrix_make(F7);
+ state = INIT;
+ break;
+ case 0x84: // Alt'd PrintScreen
+ matrix_make(PRINT_SCREEN);
+ state = INIT;
+ break;
+ case 0x00: // Overrun [3]p.25
+ matrix_clear();
+ clear_keyboard();
+ print("Overrun\n");
+ state = INIT;
+ break;
+ default: // normal key make
+ if (code < 0x80) {
+ matrix_make(code);
+ } else {
+ matrix_clear();
+ clear_keyboard();
+ xprintf("unexpected scan code at INIT: %02X\n", code);
+ }
+ state = INIT;
+ }
+ break;
+ case E0: // E0-Prefixed
+ switch (code) {
+ case 0x12: // to be ignored
+ case 0x59: // to be ignored
+ state = INIT;
+ break;
+ case 0x7E: // Control'd Pause
+ state = E0_7E;
+ break;
+ case 0xF0:
+ state = E0_F0;
+ break;
+ default:
+ if (code < 0x80) {
+ matrix_make(code|0x80);
+ } else {
+ matrix_clear();
+ clear_keyboard();
+ xprintf("unexpected scan code at E0: %02X\n", code);
+ }
+ state = INIT;
+ }
+ break;
+ case F0: // Break code
+ switch (code) {
+ case 0x83: // F7
+ matrix_break(F7);
+ state = INIT;
+ break;
+ case 0x84: // Alt'd PrintScreen
+ matrix_break(PRINT_SCREEN);
+ state = INIT;
+ break;
+ case 0xF0:
+ matrix_clear();
+ clear_keyboard();
+ xprintf("unexpected scan code at F0: F0(clear and cont.)\n");
+ break;
+ default:
+ if (code < 0x80) {
+ matrix_break(code);
+ } else {
+ matrix_clear();
+ clear_keyboard();
+ xprintf("unexpected scan code at F0: %02X\n", code);
+ }
+ state = INIT;
+ }
+ break;
+ case E0_F0: // Break code of E0-prefixed
+ switch (code) {
+ case 0x12: // to be ignored
+ case 0x59: // to be ignored
+ state = INIT;
+ break;
+ default:
+ if (code < 0x80) {
+ matrix_break(code|0x80);
+ } else {
+ matrix_clear();
+ clear_keyboard();
+ xprintf("unexpected scan code at E0_F0: %02X\n", code);
+ }
+ state = INIT;
+ }
+ break;
+ // following are states of Pause
+ case E1:
+ switch (code) {
+ case 0x14:
+ state = E1_14;
+ break;
+ default:
+ state = INIT;
+ }
+ break;
+ case E1_14:
+ switch (code) {
+ case 0x77:
+ state = E1_14_77;
+ break;
+ default:
+ state = INIT;
+ }
+ break;
+ case E1_14_77:
+ switch (code) {
+ case 0xE1:
+ state = E1_14_77_E1;
+ break;
+ default:
+ state = INIT;
+ }
+ break;
+ case E1_14_77_E1:
+ switch (code) {
+ case 0xF0:
+ state = E1_14_77_E1_F0;
+ break;
+ default:
+ state = INIT;
+ }
+ break;
+ case E1_14_77_E1_F0:
+ switch (code) {
+ case 0x14:
+ state = E1_14_77_E1_F0_14;
+ break;
+ default:
+ state = INIT;
+ }
+ break;
+ case E1_14_77_E1_F0_14:
+ switch (code) {
+ case 0xF0:
+ state = E1_14_77_E1_F0_14_F0;
+ break;
+ default:
+ state = INIT;
+ }
+ break;
+ case E1_14_77_E1_F0_14_F0:
+ switch (code) {
+ case 0x77:
+ matrix_make(PAUSE);
+ state = INIT;
+ break;
+ default:
+ state = INIT;
+ }
+ break;
+ // Following are states of Control'd Pause
+ case E0_7E:
+ if (code == 0xE0)
+ state = E0_7E_E0;
+ else
+ state = INIT;
+ break;
+ case E0_7E_E0:
+ if (code == 0xF0)
+ state = E0_7E_E0_F0;
+ else
+ state = INIT;
+ break;
+ case E0_7E_E0_F0:
+ if (code == 0x7E)
+ matrix_make(PAUSE);
+ state = INIT;
+ break;
+ default:
+ state = INIT;
+ }
+ }
+
+ // TODO: request RESEND when error occurs?
+/*
+ if (PS2_IS_FAILED(ps2_error)) {
+ uint8_t ret = ps2_host_send(PS2_RESEND);
+ xprintf("Resend: %02X\n", ret);
+ }
+*/
+ return 1;
+}
+
+bool matrix_is_modified(void)
+{
+ return is_modified;
+}
+
+inline
+bool matrix_has_ghost(void)
+{
+#ifdef MATRIX_HAS_GHOST
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ if (matrix_has_ghost_in_row(i))
+ return true;
+ }
+#endif
+ return false;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & (1<<col));
+}
+
+inline
+uint8_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ print("\nr/c 01234567\n");
+ for (uint8_t row = 0; row < matrix_rows(); row++) {
+ phex(row); print(": ");
+ pbin_reverse(matrix_get_row(row));
+#ifdef MATRIX_HAS_GHOST
+ if (matrix_has_ghost_in_row(row)) {
+ print(" <ghost");
+ }
+#endif
+ print("\n");
+ }
+}
+
+uint8_t matrix_key_count(void)
+{
+ uint8_t count = 0;
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ count += bitpop(matrix[i]);
+ }
+ return count;
+}
+
+#ifdef MATRIX_HAS_GHOST
+inline
+static bool matrix_has_ghost_in_row(uint8_t row)
+{
+ // no ghost exists in case less than 2 keys on
+ if (((matrix[row] - 1) & matrix[row]) == 0)
+ return false;
+
+ // ghost exists in case same state as other row
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ if (i != row && (matrix[i] & matrix[row]) == matrix[row])
+ return true;
+ }
+ return false;
+}
+#endif
+
+
+inline
+static void matrix_make(uint8_t code)
+{
+ if (!matrix_is_on(ROW(code), COL(code))) {
+ matrix[ROW(code)] |= 1<<COL(code);
+ is_modified = true;
+ }
+}
+
+inline
+static void matrix_break(uint8_t code)
+{
+ if (matrix_is_on(ROW(code), COL(code))) {
+ matrix[ROW(code)] &= ~(1<<COL(code));
+ is_modified = true;
+ }
+}
+
+inline
+static void matrix_clear(void)
+{
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
+}
diff --git a/converter/ps2_usb/usbconfig.h b/converter/ps2_usb/usbconfig.h
new file mode 100644
index 0000000000..d0ca4c717e
--- /dev/null
+++ b/converter/ps2_usb/usbconfig.h
@@ -0,0 +1,377 @@
+/* Name: usbconfig.h
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: Christian Starkjohann
+ * Creation Date: 2005-04-01
+ * Tabsize: 4
+ * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
+ */
+
+#ifndef __usbconfig_h_included__
+#define __usbconfig_h_included__
+
+
+/*
+General Description:
+This file is an example configuration (with inline documentation) for the USB
+driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
+also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
+wire the lines to any other port, as long as D+ is also wired to INT0 (or any
+other hardware interrupt, as long as it is the highest level interrupt, see
+section at the end of this file).
+*/
+
+/* ---------------------------- Hardware Config ---------------------------- */
+
+#define USB_CFG_IOPORTNAME D
+/* This is the port where the USB bus is connected. When you configure it to
+ * "B", the registers PORTB, PINB and DDRB will be used.
+ */
+#define USB_CFG_DMINUS_BIT 3
+/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
+ * This may be any bit in the port.
+ */
+#define USB_CFG_DPLUS_BIT 2
+/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
+ * This may be any bit in the port. Please note that D+ must also be connected
+ * to interrupt pin INT0! [You can also use other interrupts, see section
+ * "Optional MCU Description" below, or you can connect D- to the interrupt, as
+ * it is required if you use the USB_COUNT_SOF feature. If you use D- for the
+ * interrupt, the USB interrupt will also be triggered at Start-Of-Frame
+ * markers every millisecond.]
+ */
+#define USB_CFG_CLOCK_KHZ (F_CPU/1000)
+/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
+ * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
+ * require no crystal, they tolerate +/- 1% deviation from the nominal
+ * frequency. All other rates require a precision of 2000 ppm and thus a
+ * crystal!
+ * Since F_CPU should be defined to your actual clock rate anyway, you should
+ * not need to modify this setting.
+ */
+#define USB_CFG_CHECK_CRC 0
+/* Define this to 1 if you want that the driver checks integrity of incoming
+ * data packets (CRC checks). CRC checks cost quite a bit of code size and are
+ * currently only available for 18 MHz crystal clock. You must choose
+ * USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
+ */
+
+/* ----------------------- Optional Hardware Config ------------------------ */
+
+/* #define USB_CFG_PULLUP_IOPORTNAME D */
+/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
+ * V+, you can connect and disconnect the device from firmware by calling
+ * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
+ * This constant defines the port on which the pullup resistor is connected.
+ */
+/* #define USB_CFG_PULLUP_BIT 4 */
+/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
+ * above) where the 1.5k pullup resistor is connected. See description
+ * above for details.
+ */
+
+/* --------------------------- Functional Range ---------------------------- */
+
+#define USB_CFG_HAVE_INTRIN_ENDPOINT 1
+/* Define this to 1 if you want to compile a version with two endpoints: The
+ * default control endpoint 0 and an interrupt-in endpoint (any other endpoint
+ * number).
+ */
+#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1
+/* Define this to 1 if you want to compile a version with three endpoints: The
+ * default control endpoint 0, an interrupt-in endpoint 3 (or the number
+ * configured below) and a catch-all default interrupt-in endpoint as above.
+ * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
+ */
+#define USB_CFG_EP3_NUMBER 3
+/* If the so-called endpoint 3 is used, it can now be configured to any other
+ * endpoint number (except 0) with this macro. Default if undefined is 3.
+ */
+/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */
+/* The above macro defines the startup condition for data toggling on the
+ * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
+ * Since the token is toggled BEFORE sending any data, the first packet is
+ * sent with the oposite value of this configuration!
+ */
+#define USB_CFG_IMPLEMENT_HALT 0
+/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
+ * for endpoint 1 (interrupt endpoint). Although you may not need this feature,
+ * it is required by the standard. We have made it a config option because it
+ * bloats the code considerably.
+ */
+#define USB_CFG_SUPPRESS_INTR_CODE 0
+/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
+ * want to send any data over them. If this macro is defined to 1, functions
+ * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
+ * you need the interrupt-in endpoints in order to comply to an interface
+ * (e.g. HID), but never want to send any data. This option saves a couple
+ * of bytes in flash memory and the transmit buffers in RAM.
+ */
+#define USB_CFG_INTR_POLL_INTERVAL 10
+/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
+ * interval. The value is in milliseconds and must not be less than 10 ms for
+ * low speed devices.
+ */
+#define USB_CFG_IS_SELF_POWERED 0
+/* Define this to 1 if the device has its own power supply. Set it to 0 if the
+ * device is powered from the USB bus.
+ */
+#define USB_CFG_MAX_BUS_POWER 100
+/* Set this variable to the maximum USB bus power consumption of your device.
+ * The value is in milliamperes. [It will be divided by two since USB
+ * communicates power requirements in units of 2 mA.]
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITE 1
+/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
+ * transfers. Set it to 0 if you don't need it and want to save a couple of
+ * bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_READ 0
+/* Set this to 1 if you need to send control replies which are generated
+ * "on the fly" when usbFunctionRead() is called. If you only want to send
+ * data from a static buffer, set it to 0 and return the data from
+ * usbFunctionSetup(). This saves a couple of bytes.
+ */
+#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0
+/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
+ * You must implement the function usbFunctionWriteOut() which receives all
+ * interrupt/bulk data sent to any endpoint other than 0. The endpoint number
+ * can be found in 'usbRxToken'.
+ */
+#define USB_CFG_HAVE_FLOWCONTROL 0
+/* Define this to 1 if you want flowcontrol over USB data. See the definition
+ * of the macros usbDisableAllRequests() and usbEnableAllRequests() in
+ * usbdrv.h.
+ */
+#define USB_CFG_DRIVER_FLASH_PAGE 0
+/* If the device has more than 64 kBytes of flash, define this to the 64 k page
+ * where the driver's constants (descriptors) are located. Or in other words:
+ * Define this to 1 for boot loaders on the ATMega128.
+ */
+#define USB_CFG_LONG_TRANSFERS 0
+/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
+ * in a single control-in or control-out transfer. Note that the capability
+ * for long transfers increases the driver size.
+ */
+/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
+/* This macro is a hook if you want to do unconventional things. If it is
+ * defined, it's inserted at the beginning of received message processing.
+ * If you eat the received message and don't want default processing to
+ * proceed, do a return after doing your things. One possible application
+ * (besides debugging) is to flash a status LED on each packet.
+ */
+/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */
+/* This macro is a hook if you need to know when an USB RESET occurs. It has
+ * one parameter which distinguishes between the start of RESET state and its
+ * end.
+ */
+/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */
+/* This macro (if defined) is executed when a USB SET_ADDRESS request was
+ * received.
+ */
+#define USB_COUNT_SOF 0
+/* define this macro to 1 if you need the global variable "usbSofCount" which
+ * counts SOF packets. This feature requires that the hardware interrupt is
+ * connected to D- instead of D+.
+ */
+/* #ifdef __ASSEMBLER__
+ * macro myAssemblerMacro
+ * in YL, TCNT0
+ * sts timer0Snapshot, YL
+ * endm
+ * #endif
+ * #define USB_SOF_HOOK myAssemblerMacro
+ * This macro (if defined) is executed in the assembler module when a
+ * Start Of Frame condition is detected. It is recommended to define it to
+ * the name of an assembler macro which is defined here as well so that more
+ * than one assembler instruction can be used. The macro may use the register
+ * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
+ * immediately after an SOF pulse may be lost and must be retried by the host.
+ * What can you do with this hook? Since the SOF signal occurs exactly every
+ * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
+ * designs running on the internal RC oscillator.
+ * Please note that Start Of Frame detection works only if D- is wired to the
+ * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
+ */
+#define USB_CFG_CHECK_DATA_TOGGLING 0
+/* define this macro to 1 if you want to filter out duplicate data packets
+ * sent by the host. Duplicates occur only as a consequence of communication
+ * errors, when the host does not receive an ACK. Please note that you need to
+ * implement the filtering yourself in usbFunctionWriteOut() and
+ * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
+ * for each control- and out-endpoint to check for duplicate packets.
+ */
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0
+/* define this macro to 1 if you want the function usbMeasureFrameLength()
+ * compiled in. This function can be used to calibrate the AVR's RC oscillator.
+ */
+#define USB_USE_FAST_CRC 0
+/* The assembler module has two implementations for the CRC algorithm. One is
+ * faster, the other is smaller. This CRC routine is only used for transmitted
+ * messages where timing is not critical. The faster routine needs 31 cycles
+ * per byte while the smaller one needs 61 to 69 cycles. The faster routine
+ * may be worth the 32 bytes bigger code size if you transmit lots of data and
+ * run the AVR close to its limit.
+ */
+
+/* -------------------------- Device Description --------------------------- */
+
+#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
+/* USB vendor ID for the device, low byte first. If you have registered your
+ * own Vendor ID, define it here. Otherwise you may use one of obdev's free
+ * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
+/* This is the ID of the product, low byte first. It is interpreted in the
+ * scope of the vendor ID. If you have registered your own VID with usb.org
+ * or if you have licensed a PID from somebody else, define it here. Otherwise
+ * you may use one of obdev's free shared VID/PID pairs. See the file
+ * USB-IDs-for-free.txt for details!
+ * *** IMPORTANT NOTE ***
+ * This template uses obdev's shared VID/PID pair for Vendor Class devices
+ * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
+ * the implications!
+ */
+#define USB_CFG_DEVICE_VERSION 0x00, 0x01
+/* Version number of the device: Minor number first, then major number.
+ */
+#define USB_CFG_VENDOR_NAME 't', '.', 'm', '.', 'k', '.'
+#define USB_CFG_VENDOR_NAME_LEN 6
+/* These two values define the vendor name returned by the USB device. The name
+ * must be given as a list of characters under single quotes. The characters
+ * are interpreted as Unicode (UTF-16) entities.
+ * If you don't want a vendor name string, undefine these macros.
+ * ALWAYS define a vendor name containing your Internet domain name if you use
+ * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
+ * details.
+ */
+#define USB_CFG_DEVICE_NAME 'P', 'S', '/', '2', ' ', 'k', 'e', 'y', 'b', 'o', 'a', 'r', 'd', ' ', 'c', 'o', 'n', 'v', 'e', 'r', 't', 'e', 'r'
+#define USB_CFG_DEVICE_NAME_LEN 23
+/* Same as above for the device name. If you don't want a device name, undefine
+ * the macros. See the file USB-IDs-for-free.txt before you assign a name if
+ * you use a shared VID/PID.
+ */
+/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
+/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
+/* Same as above for the serial number. If you don't want a serial number,
+ * undefine the macros.
+ * It may be useful to provide the serial number through other means than at
+ * compile time. See the section about descriptor properties below for how
+ * to fine tune control over USB descriptors such as the string descriptor
+ * for the serial number.
+ */
+#define USB_CFG_DEVICE_CLASS 0
+#define USB_CFG_DEVICE_SUBCLASS 0
+/* See USB specification if you want to conform to an existing device class.
+ * Class 0xff is "vendor specific".
+ */
+#define USB_CFG_INTERFACE_CLASS 3 /* HID */
+#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */
+#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */
+/* See USB specification if you want to conform to an existing device class or
+ * protocol. The following classes must be set at interface level:
+ * HID class is 3, no subclass and protocol required (but may be useful!)
+ * CDC class is 2, use subclass 2 and protocol 1 for ACM
+ */
+#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0
+/* Define this to the length of the HID report descriptor, if you implement
+ * an HID device. Otherwise don't define it or define it to 0.
+ * If you use this define, you must add a PROGMEM character array named
+ * "usbHidReportDescriptor" to your code which contains the report descriptor.
+ * Don't forget to keep the array and this define in sync!
+ */
+
+/* #define USB_PUBLIC static */
+/* Use the define above if you #include usbdrv.c instead of linking against it.
+ * This technique saves a couple of bytes in flash memory.
+ */
+
+/* ------------------- Fine Control over USB Descriptors ------------------- */
+/* If you don't want to use the driver's default USB descriptors, you can
+ * provide our own. These can be provided as (1) fixed length static data in
+ * flash memory, (2) fixed length static data in RAM or (3) dynamically at
+ * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
+ * information about this function.
+ * Descriptor handling is configured through the descriptor's properties. If
+ * no properties are defined or if they are 0, the default descriptor is used.
+ * Possible properties are:
+ * + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
+ * at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
+ * used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
+ * you want RAM pointers.
+ * + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
+ * in static memory is in RAM, not in flash memory.
+ * + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
+ * the driver must know the descriptor's length. The descriptor itself is
+ * found at the address of a well known identifier (see below).
+ * List of static descriptor names (must be declared PROGMEM if in flash):
+ * char usbDescriptorDevice[];
+ * char usbDescriptorConfiguration[];
+ * char usbDescriptorHidReport[];
+ * char usbDescriptorString0[];
+ * int usbDescriptorStringVendor[];
+ * int usbDescriptorStringDevice[];
+ * int usbDescriptorStringSerialNumber[];
+ * Other descriptors can't be provided statically, they must be provided
+ * dynamically at runtime.
+ *
+ * Descriptor properties are or-ed or added together, e.g.:
+ * #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
+ *
+ * The following descriptors are defined:
+ * USB_CFG_DESCR_PROPS_DEVICE
+ * USB_CFG_DESCR_PROPS_CONFIGURATION
+ * USB_CFG_DESCR_PROPS_STRINGS
+ * USB_CFG_DESCR_PROPS_STRING_0
+ * USB_CFG_DESCR_PROPS_STRING_VENDOR
+ * USB_CFG_DESCR_PROPS_STRING_PRODUCT
+ * USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
+ * USB_CFG_DESCR_PROPS_HID
+ * USB_CFG_DESCR_PROPS_HID_REPORT
+ * USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
+ *
+ * Note about string descriptors: String descriptors are not just strings, they
+ * are Unicode strings prefixed with a 2 byte header. Example:
+ * int serialNumberDescriptor[] = {
+ * USB_STRING_DESCRIPTOR_HEADER(6),
+ * 'S', 'e', 'r', 'i', 'a', 'l'
+ * };
+ */
+
+#define USB_CFG_DESCR_PROPS_DEVICE 0
+#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
+#define USB_CFG_DESCR_PROPS_STRINGS 0
+#define USB_CFG_DESCR_PROPS_STRING_0 0
+#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
+#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
+#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
+//#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
+#define USB_CFG_DESCR_PROPS_HID 0
+#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
+//#define USB_CFG_DESCR_PROPS_HID_REPORT 0
+#define USB_CFG_DESCR_PROPS_UNKNOWN 0
+
+/* ----------------------- Optional MCU Description ------------------------ */
+
+/* The following configurations have working defaults in usbdrv.h. You
+ * usually don't need to set them explicitly. Only if you want to run
+ * the driver on a device which is not yet supported or with a compiler
+ * which is not fully supported (such as IAR C) or if you use a differnt
+ * interrupt than INT0, you may have to define some of these.
+ */
+/* #define USB_INTR_CFG MCUCR */
+/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */
+/* #define USB_INTR_CFG_CLR 0 */
+/* #define USB_INTR_ENABLE GIMSK */
+/* #define USB_INTR_ENABLE_BIT INT0 */
+/* #define USB_INTR_PENDING GIFR */
+/* #define USB_INTR_PENDING_BIT INTF0 */
+/* #define USB_INTR_VECTOR INT0_vect */
+
+#endif /* __usbconfig_h_included__ */