summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--common_features.mk14
-rw-r--r--docs/feature_rgb_matrix.md4
-rw-r--r--drivers/issi/is31fl3737.c252
-rw-r--r--drivers/issi/is31fl3737.h207
-rw-r--r--keyboards/planck/ez/config.h141
-rw-r--r--keyboards/planck/ez/ez.c175
-rw-r--r--keyboards/planck/ez/ez.h107
-rw-r--r--keyboards/planck/ez/rules.mk24
-rw-r--r--keyboards/planck/planck.h6
-rw-r--r--quantum/audio/audio_arm.c6
-rw-r--r--quantum/rgb_matrix.h4
-rw-r--r--quantum/rgb_matrix_drivers.c28
-rw-r--r--quantum/stm32/halconf.h2
-rw-r--r--quantum/stm32/mcuconf.h2
14 files changed, 956 insertions, 16 deletions
diff --git a/common_features.mk b/common_features.mk
index 046f94d1db..c3b6fa9168 100644
--- a/common_features.mk
+++ b/common_features.mk
@@ -114,7 +114,7 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
endif
endif
-VALID_MATRIX_TYPES := yes IS31FL3731 IS31FL3733 custom
+VALID_MATRIX_TYPES := yes IS31FL3731 IS31FL3733 IS31FL3737 custom
LED_MATRIX_ENABLE ?= no
ifneq ($(strip $(LED_MATRIX_ENABLE)), no)
@@ -135,6 +135,7 @@ ifeq ($(strip $(LED_MATRIX_ENABLE)), IS31FL3731)
endif
RGB_MATRIX_ENABLE ?= no
+
ifneq ($(strip $(RGB_MATRIX_ENABLE)), no)
ifeq ($(filter $(RGB_MATRIX_ENABLE),$(VALID_MATRIX_TYPES)),)
$(error RGB_MATRIX_ENABLE="$(RGB_MATRIX_ENABLE)" is not a valid matrix type)
@@ -151,19 +152,26 @@ ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
endif
ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3731)
- OPT_DEFS += -DIS31FL3731
+ OPT_DEFS += -DIS31FL3731 -DSTM32_I2C -DHAL_USE_I2C=TRUE
COMMON_VPATH += $(DRIVER_PATH)/issi
SRC += is31fl3731.c
SRC += i2c_master.c
endif
ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3733)
- OPT_DEFS += -DIS31FL3733
+ OPT_DEFS += -DIS31FL3733 -DSTM32_I2C -DHAL_USE_I2C=TRUE
COMMON_VPATH += $(DRIVER_PATH)/issi
SRC += is31fl3733.c
SRC += i2c_master.c
endif
+ifeq ($(strip $(RGB_MATRIX_ENABLE)), IS31FL3737)
+ OPT_DEFS += -DIS31FL3737 -DSTM32_I2C -DHAL_USE_I2C=TRUE
+ COMMON_VPATH += $(DRIVER_PATH)/issi
+ SRC += is31fl3737.c
+ SRC += i2c_master.c
+endif
+
ifeq ($(strip $(TAP_DANCE_ENABLE)), yes)
OPT_DEFS += -DTAP_DANCE_ENABLE
SRC += $(QUANTUM_DIR)/process_keycode/process_tap_dance.c
diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md
index ec12189545..36d9d01136 100644
--- a/docs/feature_rgb_matrix.md
+++ b/docs/feature_rgb_matrix.md
@@ -52,7 +52,9 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/issi/is31fl3731.h`. The `driver` is the index of the driver you defined in your `config.h` (`0` or `1` right now).
-### IS31FL3733
+### IS31FL3733/IS31FL3737
+
+!> For the IS31FL3737, replace all instances of `IS31FL3733` below with `IS31FL3737`.
There is basic support for addressable RGB matrix lighting with the I2C IS31FL3733 RGB controller. To enable it, add this to your `rules.mk`:
diff --git a/drivers/issi/is31fl3737.c b/drivers/issi/is31fl3737.c
new file mode 100644
index 0000000000..6491049274
--- /dev/null
+++ b/drivers/issi/is31fl3737.c
@@ -0,0 +1,252 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef __AVR__
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#else
+#include "wait.h"
+#endif
+
+#include <string.h>
+#include "i2c_master.h"
+#include "progmem.h"
+#include "rgb_matrix.h"
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// The address will vary depending on your wiring:
+// 00 <-> GND
+// 01 <-> SCL
+// 10 <-> SDA
+// 11 <-> VCC
+// ADDR1 represents A1:A0 of the 7-bit address.
+// ADDR2 represents A3:A2 of the 7-bit address.
+// The result is: 0b101(ADDR2)(ADDR1)
+#define ISSI_ADDR_DEFAULT 0x50
+
+#define ISSI_COMMANDREGISTER 0xFD
+#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
+#define ISSI_INTERRUPTMASKREGISTER 0xF0
+#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
+
+#define ISSI_PAGE_LEDCONTROL 0x00 //PG0
+#define ISSI_PAGE_PWM 0x01 //PG1
+#define ISSI_PAGE_AUTOBREATH 0x02 //PG2
+#define ISSI_PAGE_FUNCTION 0x03 //PG3
+
+#define ISSI_REG_CONFIGURATION 0x00 //PG3
+#define ISSI_REG_GLOBALCURRENT 0x01 //PG3
+#define ISSI_REG_RESET 0x11// PG3
+#define ISSI_REG_SWPULLUP 0x0F //PG3
+#define ISSI_REG_CSPULLUP 0x10 //PG3
+
+#ifndef ISSI_TIMEOUT
+ #define ISSI_TIMEOUT 100
+#endif
+
+#ifndef ISSI_PERSISTENCE
+ #define ISSI_PERSISTENCE 0
+#endif
+
+// Transfer buffer for TWITransmitData()
+uint8_t g_twi_transfer_buffer[20];
+
+// These buffers match the IS31FL3737 PWM registers.
+// The control buffers match the PG0 LED On/Off registers.
+// Storing them like this is optimal for I2C transfers to the registers.
+// We could optimize this and take out the unused registers from these
+// buffers and the transfers in IS31FL3737_write_pwm_buffer() but it's
+// probably not worth the extra complexity.
+uint8_t g_pwm_buffer[DRIVER_COUNT][192];
+bool g_pwm_buffer_update_required = false;
+
+uint8_t g_led_control_registers[DRIVER_COUNT][24] = { { 0 } };
+bool g_led_control_registers_update_required = false;
+
+void IS31FL3737_write_register( uint8_t addr, uint8_t reg, uint8_t data )
+{
+ g_twi_transfer_buffer[0] = reg;
+ g_twi_transfer_buffer[1] = data;
+
+ #if ISSI_PERSISTENCE > 0
+ for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0)
+ break;
+ }
+ #else
+ i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
+ #endif
+}
+
+void IS31FL3737_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer )
+{
+ // assumes PG1 is already selected
+
+ // transmit PWM registers in 12 transfers of 16 bytes
+ // g_twi_transfer_buffer[] is 20 bytes
+
+ // iterate over the pwm_buffer contents at 16 byte intervals
+ for ( int i = 0; i < 192; i += 16 ) {
+ g_twi_transfer_buffer[0] = i;
+ // copy the data from i to i+15
+ // device will auto-increment register for data after the first byte
+ // thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer
+ for ( int j = 0; j < 16; j++ ) {
+ g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
+ }
+
+ #if ISSI_PERSISTENCE > 0
+ for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
+ if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
+ break;
+ }
+ #else
+ i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
+ #endif
+ }
+}
+
+void IS31FL3737_init( uint8_t addr )
+{
+ // In order to avoid the LEDs being driven with garbage data
+ // in the LED driver's PWM registers, shutdown is enabled last.
+ // Set up the mode and other settings, clear the PWM registers,
+ // then disable software shutdown.
+
+ // Unlock the command register.
+ IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+ // Select PG0
+ IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+ // Turn off all LEDs.
+ for ( int i = 0x00; i <= 0x17; i++ )
+ {
+ IS31FL3737_write_register( addr, i, 0x00 );
+ }
+
+ // Unlock the command register.
+ IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+ // Select PG1
+ IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+ // Set PWM on all LEDs to 0
+ // No need to setup Breath registers to PWM as that is the default.
+ for ( int i = 0x00; i <= 0xBF; i++ )
+ {
+ IS31FL3737_write_register( addr, i, 0x00 );
+ }
+
+ // Unlock the command register.
+ IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+
+ // Select PG3
+ IS31FL3737_write_register( addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION );
+ // Set global current to maximum.
+ IS31FL3737_write_register( addr, ISSI_REG_GLOBALCURRENT, 0xFF );
+ // Disable software shutdown.
+ IS31FL3737_write_register( addr, ISSI_REG_CONFIGURATION, 0x01 );
+
+ // Wait 10ms to ensure the device has woken up.
+ #ifdef __AVR__
+ _delay_ms( 10 );
+ #else
+ wait_ms(10);
+ #endif
+}
+
+void IS31FL3737_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
+{
+ if ( index >= 0 && index < DRIVER_LED_TOTAL ) {
+ is31_led led = g_is31_leds[index];
+
+ g_pwm_buffer[led.driver][led.r] = red;
+ g_pwm_buffer[led.driver][led.g] = green;
+ g_pwm_buffer[led.driver][led.b] = blue;
+ g_pwm_buffer_update_required = true;
+ }
+}
+
+void IS31FL3737_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
+{
+ for ( int i = 0; i < DRIVER_LED_TOTAL; i++ )
+ {
+ IS31FL3737_set_color( i, red, green, blue );
+ }
+}
+
+void IS31FL3737_set_led_control_register( uint8_t index, bool red, bool green, bool blue )
+{
+ is31_led led = g_is31_leds[index];
+
+ uint8_t control_register_r = led.r / 8;
+ uint8_t control_register_g = led.g / 8;
+ uint8_t control_register_b = led.b / 8;
+ uint8_t bit_r = led.r % 8;
+ uint8_t bit_g = led.g % 8;
+ uint8_t bit_b = led.b % 8;
+
+ if ( red ) {
+ g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r);
+ } else {
+ g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r);
+ }
+ if ( green ) {
+ g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g);
+ } else {
+ g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g);
+ }
+ if ( blue ) {
+ g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b);
+ } else {
+ g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b);
+ }
+
+ g_led_control_registers_update_required = true;
+
+}
+
+void IS31FL3737_update_pwm_buffers( uint8_t addr1, uint8_t addr2 )
+{
+ if ( g_pwm_buffer_update_required )
+ {
+ // Firstly we need to unlock the command register and select PG1
+ IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+ IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM );
+
+ IS31FL3737_write_pwm_buffer( addr1, g_pwm_buffer[0] );
+ //IS31FL3737_write_pwm_buffer( addr2, g_pwm_buffer[1] );
+ }
+ g_pwm_buffer_update_required = false;
+}
+
+void IS31FL3737_update_led_control_registers( uint8_t addr1, uint8_t addr2 )
+{
+ if ( g_led_control_registers_update_required )
+ {
+ // Firstly we need to unlock the command register and select PG0
+ IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5 );
+ IS31FL3737_write_register( addr1, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL );
+ for ( int i=0; i<24; i++ )
+ {
+ IS31FL3737_write_register(addr1, i, g_led_control_registers[0][i] );
+ //IS31FL3737_write_register(addr2, i, g_led_control_registers[1][i] );
+ }
+ }
+}
diff --git a/drivers/issi/is31fl3737.h b/drivers/issi/is31fl3737.h
new file mode 100644
index 0000000000..69c4b9b538
--- /dev/null
+++ b/drivers/issi/is31fl3737.h
@@ -0,0 +1,207 @@
+/* Copyright 2017 Jason Williams
+ * Copyright 2018 Jack Humbert
+ * Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#ifndef IS31FL3737_DRIVER_H
+#define IS31FL3737_DRIVER_H
+
+#include <stdint.h>
+#include <stdbool.h>
+
+typedef struct is31_led {
+ uint8_t driver:2;
+ uint8_t r;
+ uint8_t g;
+ uint8_t b;
+} __attribute__((packed)) is31_led;
+
+extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
+
+void IS31FL3737_init( uint8_t addr );
+void IS31FL3737_write_register( uint8_t addr, uint8_t reg, uint8_t data );
+void IS31FL3737_write_pwm_buffer( uint8_t addr, uint8_t *pwm_buffer );
+
+void IS31FL3737_set_color( int index, uint8_t red, uint8_t green, uint8_t blue );
+void IS31FL3737_set_color_all( uint8_t red, uint8_t green, uint8_t blue );
+
+void IS31FL3737_set_led_control_register( uint8_t index, bool red, bool green, bool blue );
+
+// This should not be called from an interrupt
+// (eg. from a timer interrupt).
+// Call this while idle (in between matrix scans).
+// If the buffer is dirty, it will update the driver with the buffer.
+void IS31FL3737_update_pwm_buffers( uint8_t addr1, uint8_t addr2 );
+void IS31FL3737_update_led_control_registers( uint8_t addr1, uint8_t addr2 );
+
+#define A_1 0x00
+#define A_2 0x01
+#define A_3 0x02
+#define A_4 0x03
+#define A_5 0x04
+#define A_6 0x05
+#define A_7 0x08
+#define A_8 0x09
+#define A_9 0x0A
+#define A_10 0x0B
+#define A_11 0x0C
+#define A_12 0x0D
+
+#define B_1 0x10
+#define B_2 0x11
+#define B_3 0x12
+#define B_4 0x13
+#define B_5 0x14
+#define B_6 0x15
+#define B_7 0x18
+#define B_8 0x19
+#define B_9 0x1A
+#define B_10 0x1B
+#define B_11 0x1C
+#define B_12 0x1D
+
+#define C_1 0x20
+#define C_2 0x21
+#define C_3 0x22
+#define C_4 0x23
+#define C_5 0x24
+#define C_6 0x25
+#define C_7 0x28
+#define C_8 0x29
+#define C_9 0x2A
+#define C_10 0x2B
+#define C_11 0x2C
+#define C_12 0x2D
+
+#define D_1 0x30
+#define D_2 0x31
+#define D_3 0x32
+#define D_4 0x33
+#define D_5 0x34
+#define D_6 0x35
+#define D_7 0x38
+#define D_8 0x39
+#define D_9 0x3A
+#define D_10 0x3B
+#define D_11 0x3C
+#define D_12 0x3D
+
+#define E_1 0x40
+#define E_2 0x41
+#define E_3 0x42
+#define E_4 0x43
+#define E_5 0x44
+#define E_6 0x45
+#define E_7 0x48
+#define E_8 0x49
+#define E_9 0x4A
+#define E_10 0x4B
+#define E_11 0x4C
+#define E_12 0x4D
+
+#define F_1 0x50
+#define F_2 0x51
+#define F_3 0x52
+#define F_4 0x53
+#define F_5 0x54
+#define F_6 0x55
+#define F_7 0x58
+#define F_8 0x59
+#define F_9 0x5A
+#define F_10 0x5B
+#define F_11 0x5C
+#define F_12 0x5D
+
+#define G_1 0x60
+#define G_2 0x61
+#define G_3 0x62
+#define G_4 0x63
+#define G_5 0x64
+#define G_6 0x65
+#define G_7 0x68
+#define G_8 0x69
+#define G_9 0x6A
+#define G_10 0x6B
+#define G_11 0x6C
+#define G_12 0x6D
+
+#define H_1 0x70
+#define H_2 0x71
+#define H_3 0x72
+#define H_4 0x73
+#define H_5 0x74
+#define H_6 0x75
+#define H_7 0x78
+#define H_8 0x79
+#define H_9 0x7A
+#define H_10 0x7B
+#define H_11 0x7C
+#define H_12 0x7D
+
+#define I_1 0x80
+#define I_2 0x81
+#define I_3 0x82
+#define I_4 0x83
+#define I_5 0x84
+#define I_6 0x85
+#define I_7 0x88
+#define I_8 0x89
+#define I_9 0x8A
+#define I_10 0x8B
+#define I_11 0x8C
+#define I_12 0x8D
+
+#define J_1 0x90
+#define J_2 0x91
+#define J_3 0x92
+#define J_4 0x93
+#define J_5 0x94
+#define J_6 0x95
+#define J_7 0x98
+#define J_8 0x99
+#define J_9 0x9A
+#define J_10 0x9B
+#define J_11 0x9C
+#define J_12 0x9D
+
+#define K_1 0xA0
+#define K_2 0xA1
+#define K_3 0xA2
+#define K_4 0xA3
+#define K_5 0xA4
+#define K_6 0xA5
+#define K_7 0xA8
+#define K_8 0xA9
+#define K_9 0xAA
+#define K_10 0xAB
+#define K_11 0xAC
+#define K_12 0xAD
+
+#define L_1 0xB0
+#define L_2 0xB1
+#define L_3 0xB2
+#define L_4 0xB3
+#define L_5 0xB4
+#define L_6 0xB5
+#define L_7 0xB8
+#define L_8 0xB9
+#define L_9 0xBA
+#define L_10 0xBB
+#define L_11 0xBC
+#define L_12 0xBD
+
+#endif // IS31FL3737_DRIVER_H
diff --git a/keyboards/planck/ez/config.h b/keyboards/planck/ez/config.h
new file mode 100644
index 0000000000..c449d17192
--- /dev/null
+++ b/keyboards/planck/ez/config.h
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2018 Jack Humbert <jack.humb@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define DEVICE_VER 0x0000
+
+#undef MATRIX_ROWS
+#undef MATRIX_COLS
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 6
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+
+#undef MATRIX_ROW_PINS
+#undef MATRIX_COL_PINS
+
+#define MATRIX_ROW_PINS { A10, A9, A8, B15, C13, C14, C15, A2 }
+#define MATRIX_COL_PINS { B11, B10, B2, B1, A7, B0 }
+
+#define NUMBER_OF_ENCODERS 1
+#define ENCODERS_PAD_A { B12 }
+#define ENCODERS_PAD_B { B13 }
+
+#define MUSIC_MAP
+#undef AUDIO_VOICES
+#undef C6_AUDIO
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 6
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+// #define WS2812_LED_N 2
+// #define RGBLED_NUM WS2812_LED_N
+// #define WS2812_TIM_N 2
+// #define WS2812_TIM_CH 2
+// #define PORT_WS2812 GPIOA
+// #define PIN_WS2812 1
+// #define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
+//#define WS2812_DMA_CHANNEL 7 // DMA channel for TIMx_UP
+//#define WS2812_EXTERNAL_PULLUP
+
+#define DRIVER_ADDR_1 0b1010000
+#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons.
+
+#define DRIVER_COUNT 1
+#define DRIVER_1_LED_TOTAL 47
+#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
+
+#define RGB_MATRIX_KEYPRESSES
diff --git a/keyboards/planck/ez/ez.c b/keyboards/planck/ez/ez.c
new file mode 100644
index 0000000000..b859af6c15
--- /dev/null
+++ b/keyboards/planck/ez/ez.c
@@ -0,0 +1,175 @@
+/* Copyright 2018 Jack Humbert <jack.humb@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "ez.h"
+
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ * driver
+ * | R location
+ * | | G location
+ * | | | B location
+ * | | | | */
+ {0, A_12, B_12, C_12},
+ {0, A_11, B_11, C_11},
+ {0, A_10, B_10, C_10},
+ {0, A_9, B_9, C_9},
+ {0, A_8, B_8, C_8},
+ {0, A_7, B_7, C_7},
+
+ {0, G_12, H_12, I_12},
+ {0, G_11, H_11, I_11},
+ {0, G_10, H_10, I_10},
+ {0, G_9, H_9, I_9},
+ {0, G_8, H_8, I_8},
+ {0, G_7, H_7, I_7},
+
+ {0, A_6, B_6, C_6},
+ {0, A_5, B_5, C_5},
+ {0, A_4, B_4, C_4},
+ {0, A_3, B_3, C_3},
+ {0, A_2, B_2, C_2},
+ {0, A_1, B_1, C_1},
+
+ {0, G_6, H_6, I_6},
+ {0, G_5, H_5, I_5},
+ {0, G_4, H_4, I_4},
+ {0, G_3, H_3, I_3},
+ {0, G_2, H_2, I_2},
+ {0, G_1, H_1, I_1},
+
+ {0, D_12, E_12, F_12},
+ {0, D_11, E_11, F_11},
+ {0, D_10, E_10, F_10},
+ {0, D_9, E_9, F_9},
+ {0, D_8, E_8, F_8},
+ {0, D_7, E_7, F_7},
+
+ {0, J_12, K_12, L_12},
+ {0, J_11, K_11, L_11},
+ {0, J_10, K_10, L_10},
+ {0, J_9, K_9, L_9},
+ {0, J_8, K_8, L_8},
+ {0, J_7, K_7, L_7},
+
+ {0, D_6, E_6, F_6},
+ {0, D_5, E_5, F_5},
+ {0, D_4, E_4, F_4},
+ {0, D_3, E_3, F_3},
+ {0, D_2, E_2, F_2},
+ {0, D_1, E_1, F_1},
+
+ {0, J_6, K_6, L_6},
+ {0, J_5, K_5, L_5},
+ {0, J_4, K_4, L_4},
+ {0, J_3, K_3, L_3},
+ {0, J_2, K_2, L_2},
+
+};
+
+const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+
+ /*{row | col << 4}
+ | {x=0..224, y=0..64}
+ | | modifier
+ | | | */
+ {{0|(0<<4)}, {20.36*0, 21.33*0}, 1},
+ {{0|(1<<4)}, {20.36*1, 21.33*0}, 0},
+ {{0|(2<<4)}, {20.36*2, 21.33*0}, 0},
+ {{0|(3<<4)}, {20.36*3, 21.33*0}, 0},
+ {{0|(4<<4)}, {20.36*4, 21.33*0}, 0},
+ {{0|(5<<4)}, {20.36*5, 21.33*0}, 0},
+ {{4|(0<<4)}, {20.36*6, 21.33*0}, 0},
+ {{4|(1<<4)}, {20.36*7, 21.33*0}, 0},
+ {{4|(2<<4)}, {20.36*8, 21.33*0}, 0},
+ {{4|(3<<4)}, {20.36*9, 21.33*0}, 0},
+ {{4|(4<<4)}, {20.36*10,21.33*0}, 0},
+ {{4|(5<<4)}, {20.36*11,21.33*0}, 1},
+
+ {{1|(0<<4)}, {20.36*0, 21.33*1}, 1},
+ {{1|(1<<4)}, {20.36*1, 21.33*1}, 0},
+ {{1|(2<<4)}, {20.36*2, 21.33*1}, 0},
+ {{1|(3<<4)}, {20.36*3, 21.33*1}, 0},
+ {{1|(4<<4)}, {20.36*4, 21.33*1}, 0},
+ {{1|(5<<4)}, {20.36*5, 21.33*1}, 0},
+ {{5|(0<<4)}, {20.36*6, 21.33*1}, 0},
+ {{5|(1<<4)}, {20.36*7, 21.33*1}, 0},
+ {{5|(2<<4)}, {20.36*8, 21.33*1}, 0},
+ {{5|(3<<4)}, {20.36*9, 21.33*1}, 0},
+ {{5|(4<<4)}, {20.36*10,21.33*1}, 0},
+ {{5|(5<<4)}, {20.36*11,21.33*1}, 1},
+
+ {{2|(0<<4)}, {20.36*0, 21.33*2}, 1},
+ {{2|(1<<4)}, {20.36*1, 21.33*2}, 0},
+ {{2|(2<<4)}, {20.36*2, 21.33*2}, 0},
+ {{2|(3<<4)}, {20.36*3, 21.33*2}, 0},
+ {{2|(4<<4)}, {20.36*4, 21.33*2}, 0},
+ {{2|(5<<4)}, {20.36*5, 21.33*2}, 0},
+ {{6|(0<<4)}, {20.36*6, 21.33*2}, 0},
+ {{6|(1<<4)}, {20.36*7, 21.33*2}, 0},
+ {{6|(2<<4)}, {20.36*8, 21.33*2}, 0},
+ {{6|(3<<4)}, {20.36*9, 21.33*2}, 0},
+ {{6|(4<<4)}, {20.36*10,21.33*2}, 0},
+ {{6|(5<<4)}, {20.36*11,21.33*2}, 1},
+
+ {{3|(0<<4)}, {20.36*0, 21.33*3}, 1},
+ {{3|(1<<4)}, {20.36*1, 21.33*3}, 1},
+ {{3|(2<<4)}, {20.36*2, 21.33*3}, 1},
+ {{7|(3<<4)}, {20.36*3, 21.33*3}, 1},
+ {{7|(4<<4)}, {20.36*4, 21.33*3}, 1},
+ {{7|(5<<4)}, {20.36*5.5,21.33*3}, 0},
+ {{7|(0<<4)}, {20.36*7, 21.33*3}, 1},
+ {{7|(1<<4)}, {20.36*8, 21.33*3}, 1},
+ {{7|(2<<4)}, {20.36*9, 21.33*3}, 1},
+ {{3|(3<<4)}, {20.36*10,21.33*3}, 1},
+ {{3|(4<<4)}, {20.36*11,21.33*3}, 1}
+};
+
+void matrix_init_kb(void) {
+ matrix_init_user();
+
+ palSetPadMode(GPIOB, 8, PAL_MODE_OUTPUT_PUSHPULL);
+ palSetPadMode(GPIOB, 9, PAL_MODE_OUTPUT_PUSHPULL);
+
+ palClearPad(GPIOB, 8);
+ palClearPad(GPIOB, 9);
+}
+
+void matrix_scan_kb(void) {
+ matrix_scan_user();
+}
+
+uint32_t layer_state_set_kb(uint32_t state) {
+
+ palClearPad(GPIOB, 8);
+ palClearPad(GPIOB, 9);
+ state = layer_state_set_user(state);
+ uint8_t layer = biton32(state);
+ switch (layer) {
+ case 3:
+ palSetPad(GPIOB, 9);
+ break;
+ case 4:
+ palSetPad(GPIOB, 8);
+ break;
+ case 6:
+ palSetPad(GPIOB, 9);
+ palSetPad(GPIOB, 8);
+ break;
+ default:
+ break;
+ }
+ return state;
+}
diff --git a/keyboards/planck/ez/ez.h b/keyboards/planck/ez/ez.h
new file mode 100644
index 0000000000..a3ca2b6ece
--- /dev/null
+++ b/keyboards/planck/ez/ez.h
@@ -0,0 +1,107 @@
+/* Copyright 2018 Jack Humbert <jack.humb@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "planck.h"
+
+#define LAYOUT_planck_1x2uC( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a \
+) \
+{ \
+ { k00, k01, k02, k03, k04, k05 }, \
+ { k10, k11, k12, k13, k14, k15 }, \
+ { k20, k21, k22, k23, k24, k25 }, \
+ { k30, k31, k32, k39, k3a, k3b }, \
+ { k06, k07, k08, k09, k0a, k0b }, \
+ { k16, k17, k18, k19, k1a, k1b }, \
+ { k26, k27, k28, k29, k2a, k2b }, \
+ { k36, k37, k38, k33, k34, k35 } \
+}
+
+#define LAYOUT_planck_1x2uR( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a \
+) \
+{ \
+ { k00, k01, k02, k03, k04, k05 }, \
+ { k10, k11, k12, k13, k14, k15 }, \
+ { k20, k21, k22, k23, k24, k25 }, \
+ { k30, k31, k32, k39, k3a, k3b }, \
+ { k06, k07, k08, k09, k0a, k0b }, \
+ { k16, k17, k18, k19, k1a, k1b }, \
+ { k26, k27, k28, k29, k2a, k2b }, \
+ { k36, k37, k38, k33, k34, k35 } \
+}
+
+#define LAYOUT_planck_1x2uL( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a \
+) \
+{ \
+ { k00, k01, k02, k03, k04, k05 }, \
+ { k10, k11, k12, k13, k14, k15 }, \
+ { k20, k21, k22, k23, k24, k25 }, \
+ { k30, k31, k32, k39, k3a, k3b }, \
+ { k06, k07, k08, k09, k0a, k0b }, \
+ { k16, k17, k18, k19, k1a, k1b }, \
+ { k26, k27, k28, k29, k2a, k2b }, \
+ { k36, k37, k38, k33, k34, k35 } \
+}
+
+#define LAYOUT_planck_2x2u( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+ k30, k31, k32, k33, k34, k36, k37, k38, k39, k3a \
+) \
+{ \
+ { k00, k01, k02, k03, k04, k05 }, \
+ { k10, k11, k12, k13, k14, k15 }, \
+ { k20, k21, k22, k23, k24, k25 }, \
+ { k30, k31, k32, k39, k3a, k3b }, \
+ { k06, k07, k08, k09, k0a, k0b }, \
+ { k16, k17, k18, k19, k1a, k1b }, \
+ { k26, k27, k28, k29, k2a, k2b }, \
+ { k36, k37, k38, k33, k34, k35 } \
+}
+
+#define LAYOUT_planck_grid( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+ k30, k31, k32, k33, k34, k35, KC_NO, k36, k37, k38, k39, k3a \
+) \
+{ \
+ { k00, k01, k02, k03, k04, k05 }, \
+ { k10, k11, k12, k13, k14, k15 }, \
+ { k20, k21, k22, k23, k24, k25 }, \
+ { k30, k31, k32, k39, k3a, KC_NO }, \
+ { k06, k07, k08, k09, k0a, k0b }, \
+ { k16, k17, k18, k19, k1a, k1b }, \
+ { k26, k27, k28, k29, k2a, k2b }, \
+ { k36, k37, k38, k33, k34, k35 } \
+}
+
+#define KEYMAP LAYOUT_planck_grid
+#define LAYOUT_ortho_4x12 LAYOUT_planck_grid
+#define KC_LAYOUT_ortho_4x12 KC_KEYMAP
diff --git a/keyboards/planck/ez/rules.mk b/keyboards/planck/ez/rules.mk
new file mode 100644
index 0000000000..c6fb52d2b5
--- /dev/null
+++ b/keyboards/planck/ez/rules.mk
@@ -0,0 +1,24 @@
+# project specific files
+LAYOUTS += ortho_4x12
+
+# Cortex version
+MCU = STM32F303
+
+# Build Options
+# comment out to disable the options.
+#
+BACKLIGHT_ENABLE = no
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
+## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover
+CUSTOM_MATRIX = no # Custom matrix file
+AUDIO_ENABLE = yes
+RGBLIGHT_ENABLE = no
+# SERIAL_LINK_ENABLE = yes
+ENCODER_ENABLE = yes
+RGB_MATRIX_ENABLE = IS31FL3737
diff --git a/keyboards/planck/planck.h b/keyboards/planck/planck.h
index d908d80ec4..4bc5e9c3f2 100644
--- a/keyboards/planck/planck.h
+++ b/keyboards/planck/planck.h
@@ -5,6 +5,10 @@
#define encoder_update(clockwise) encoder_update_user(uint8_t index, clockwise)
+#ifdef KEYBOARD_planck_ez
+ #include "ez.h"
+#endif
+
#ifdef __AVR__
#define LAYOUT_planck_mit( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
@@ -50,7 +54,7 @@
#define LAYOUT_ortho_4x12 LAYOUT_planck_grid
#define KC_LAYOUT_ortho_4x12 KC_KEYMAP
-#else
+#elif KEYBOARD_planck_rev6
#define LAYOUT_planck_1x2uC( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
diff --git a/quantum/audio/audio_arm.c b/quantum/audio/audio_arm.c
index 6760015ef4..de0cd15c58 100644
--- a/quantum/audio/audio_arm.c
+++ b/quantum/audio/audio_arm.c
@@ -79,7 +79,7 @@ float startup_song[][2] = STARTUP_SONG;
static void gpt_cb8(GPTDriver *gptp);
-#define DAC_BUFFER_SIZE 720
+#define DAC_BUFFER_SIZE 100
#ifndef DAC_SAMPLE_MAX
#define DAC_SAMPLE_MAX 65535U
#endif
@@ -98,8 +98,8 @@ static void gpt_cb8(GPTDriver *gptp);
RESTART_CHANNEL_1()
#define UPDATE_CHANNEL_2_FREQ(freq) gpt7cfg1.frequency = freq * DAC_BUFFER_SIZE; \
RESTART_CHANNEL_2()
-#define GET_CHANNEL_1_FREQ gpt6cfg1.frequency
-#define GET_CHANNEL_2_FREQ gpt7cfg1.frequency
+#define GET_CHANNEL_1_FREQ (uint16_t)(gpt6cfg1.frequency * DAC_BUFFER_SIZE)
+#define GET_CHANNEL_2_FREQ (uint16_t)(gpt7cfg1.frequency * DAC_BUFFER_SIZE)
/*
diff --git a/quantum/rgb_matrix.h b/quantum/rgb_matrix.h
index 855ea03230..0e193dcb2f 100644
--- a/quantum/rgb_matrix.h
+++ b/quantum/rgb_matrix.h
@@ -28,7 +28,9 @@
#ifdef IS31FL3731
#include "is31fl3731.h"
#elif defined (IS31FL3733)
- #include "is31fl3733.h"
+ #include "is31fl3733.h"
+#elif defined (IS31FL3737)
+ #include "is31fl3737.h"
#endif
#ifndef RGB_MATRIX_LED_FLUSH_LIMIT
diff --git a/quantum/rgb_matrix_drivers.c b/quantum/rgb_matrix_drivers.c
index 70b80293dd..3b7d58483a 100644
--- a/quantum/rgb_matrix_drivers.c
+++ b/quantum/rgb_matrix_drivers.c
@@ -23,7 +23,7 @@
* be here if shared between boards.
*/
-#if defined(IS31FL3731) || defined(IS31FL3733)
+#if defined(IS31FL3731) || defined(IS31FL3733) || defined(IS31FL3737)
#include "i2c_master.h"
@@ -33,23 +33,29 @@ static void init( void )
#ifdef IS31FL3731
IS31FL3731_init( DRIVER_ADDR_1 );
IS31FL3731_init( DRIVER_ADDR_2 );
-#else
+#elif defined(IS31FL3733)
IS31FL3733_init( DRIVER_ADDR_1 );
+#else
+ IS31FL3737_init( DRIVER_ADDR_1 );
#endif
for ( int index = 0; index < DRIVER_LED_TOTAL; index++ ) {
bool enabled = true;
// This only caches it for later
#ifdef IS31FL3731
IS31FL3731_set_led_control_register( index, enabled, enabled, enabled );
-#else
+#elif defined(IS31FL3733)
IS31FL3733_set_led_control_register( index, enabled, enabled, enabled );
+#else
+ IS31FL3737_set_led_control_register( index, enabled, enabled, enabled );
#endif
}
// This actually updates the LED drivers
#ifdef IS31FL3731
IS31FL3731_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
-#else
+#elif defined(IS31FL3733)
IS31FL3733_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
+#else
+ IS31FL3737_update_led_control_registers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
#endif
}
@@ -65,7 +71,7 @@ const rgb_matrix_driver_t rgb_matrix_driver = {
.set_color = IS31FL3731_set_color,
.set_color_all = IS31FL3731_set_color_all,
};
-#else
+#elif defined(IS31FL3733)
static void flush( void )
{
IS31FL3733_update_pwm_buffers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
@@ -77,6 +83,18 @@ const rgb_matrix_driver_t rgb_matrix_driver = {
.set_color = IS31FL3733_set_color,
.set_color_all = IS31FL3733_set_color_all,
};
+#else
+static void flush( void )
+{
+ IS31FL3737_update_pwm_buffers( DRIVER_ADDR_1, DRIVER_ADDR_2 );
+}
+
+const rgb_matrix_driver_t rgb_matrix_driver = {
+ .init = init,
+ .flush = flush,
+ .set_color = IS31FL3737_set_color,
+ .set_color_all = IS31FL3737_set_color_all,
+};
#endif
#endif
diff --git a/quantum/stm32/halconf.h b/quantum/stm32/halconf.h
index 8fe8e0c6f5..c3e0cbb728 100644
--- a/quantum/stm32/halconf.h
+++ b/quantum/stm32/halconf.h
@@ -76,7 +76,7 @@
* @brief Enables the I2C subsystem.
*/
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
+#define HAL_USE_I2C TRUE
#endif
/**
diff --git a/quantum/stm32/mcuconf.h b/quantum/stm32/mcuconf.h
index 7c3c6e570c..36f8ca2252 100644
--- a/quantum/stm32/mcuconf.h
+++ b/quantum/stm32/mcuconf.h
@@ -154,7 +154,7 @@
/*
* I2C driver system settings.
*/
-#define STM32_I2C_USE_I2C1 FALSE
+#define STM32_I2C_USE_I2C1 TRUE
#define STM32_I2C_USE_I2C2 FALSE
#define STM32_I2C_BUSY_TIMEOUT 50
#define STM32_I2C_I2C1_IRQ_PRIORITY 10